M U S I C ’ S M O S T H I S T O R I C S T A N D S F O R O R C H E S T R A , B A N D A N D C O M B O

The KB1 SERIES of Symphonic Music Stands are the most robust available. One-piece steel bases and large diameter tubes and Hamilton’s superior all steel desk. Powder coated with black, scratch resistant, wrinkle finish.

K B 1 F K B 1 D K B 1 E

2

SYMPHONICMUSIC STANDS

3

KB1D T H E G R I P P ER Holds up to 35 pounds of music.Knob adjustment for height and desk angle.Height adjustable from 26 - 48".

KB1E T H E AU TO M AT I C Holds up to 10 pounds of music.Smooth operating automatic clutch for height adjustment.Knob adjustment for desk angle.Height adjustable from 26 - 48".

KB1FT H E T R I G G ER Effortless height adjustment with trigger operated brake.Knob adjustment for desk angle.Height adjustable from 29 - 50".

KB95ES1 T H E EN CO R E DOUBLE SHELF DESK Felt-lined accessory shelf for convenient storage. Available on KB95E and KB1F stands.

KB95E T H E EN CO R E AU TO M AT I C Smooth operating automatic clutch for height adjustment.Desk angle is set with a pressure adjustable plate.Height adjustable from 26 - 48¹/₂".• Steel desk with rolled edges andcorner gussets.V Resists bending and won’t break.• Desk cannot pull off of upper tube.V No ‘lift-off’ or spilled music.• Tapered fit of lower tube and post.V No wobble, no ‘rock n’ roll’, no plastic to break.• Feet securely welded and riveted to base hub.V Will not break or crack.

Available as:KB95E1 Single KB95E2 DoubleKB95E6 Six packs

K B 9 5 E S 1

K B 9 5 E

The KB95 SERIES of Symphonic Music Stands are objectively superior in many ways. All steel construction, powder coated with black, scratch resistant, wrinkle finish and featuring Hamilton’s well known steel desk with rolled edges, corner gussets and reinforcing ribs. Welded and riveted steel base.

5

KB901C CO N D U C TO R S TA N D Portable conductor's stand features a tilting steel desk with a return lip. Plastic hub, height and tilt fittings with metal-to-metal threads. Desk is easily removable from the vertical shaft. Durable black powder coated finish.

KB900C CO N D U C TO R S TA N D Portable conductor's stand features a tilting steel desk with a return lip. Plastic hub, height and tilt fittings with quick release toggle clamps. Desk is easily removable from the vertical shaft. Durable black powder coated finish.

KB80C CO N D U C TO R S TA N DProfessional quality concert music stand with lever height adjustment. Tilting desk that pivots between plates. Two section center tube adjusts from 90mm to 145mm.

K B 9 0 1 C K B 9 0 0 C K B 8 0 C

4

KB100 Music Stand CartHolds 24 x KB95D or E stands or 18 x KB1D, E or F stands.Holds most other brand stands as well.Aluminum frames and rails.Large casters for mobility. Two locking casters.

K B 3 0 0 A K B 1 0 0

KB300A T H E M A E S T R O Conductor’s StandExtra-wide desk- holds three full-sized closed scores side-to-side.Knob adjustment for height and desk angle.Height adjustable from 26 - 481/2".

SYMPHONIC PORTABLEMUSIC STANDS MUSIC STANDS

7

Hamilton Stands invented the folding music stand in 1883 and have sold more stands than anyone else. We offer automatic clutch stands with a fixed desk, those with knob adjustment, a tilting desk and carry bag. There are an outstanding range of colors available too.

KB200FFO L D I N G S TA N D W I T H AU TO CLU TCHMade with a patent pending automatic clutch, this inexpensive folding sheet music stand is easy to adjust and compact to carry. Supplied with a nylon carrying bag and a non-tilting removable Euro-style desk.

KB340FFO L D I N G S TA N DThree section folding stand with knob adjustment. Plastic fittings with metal-to-metal threads. European style rectangular desk with top extensions for music support and wire music retainers. Tripod base folds for convenient transport and storage. Durable black powder coated finish.

KB 380FFO L D I N G S TA N DThree section folding stand with knob adjustment and nylon carrying bag included. Plastic fittings with metal-to-metal threads. European style rectangular desk with fold-out extensions for support of music and wire music retainers. Tubular leg tripod base folds for convenient transport and storage. Durable black powder coated finish.

FOLDING

6

MUSIC STANDS

K B 2 0 0 F K B 3 1 0 F

K B 3 4 0 F K B 3 8 0 F

KB301FFO L D I N G S TA N DThree section folding stand with knob adjustment. Metal fittings with metal-to-metal threads. European style rectangular desk with wire music retainers. Tripod base folds for convenient transport and storage. Black powder coated finish.

KB310FFO L D I N G S TA N DThree section folding sheet music stand with bag. Metal fittings with metal-to-metal threads. European style rectangular desk with wire music retainers. Tripod base folds for convenient transport and storage. KB301F with Black powder coated finish.

WINDINSTRUMENT STANDS

Designed for value, the wind instrument stands in the Classic SERIES feature compact designs, steel threads and durable padding. Black, powder coated finishes.

KB950 T R U M P E T S TA N DAdjustable spring loaded bell cup location.Single height of 17³/₄".

KB962Double Alto / Tenor StandHorizontal folding “T” shaped base of square tubing. Removable posts.Two flute / clarinet doubling pegs included.

K B 9 5 0 K B 9 6 0 K B 9 6 2

KB956W S I N G L E P EG B A S EFlat steel base for stable support.Single peg location.Flute/clarinet doubling peg included.

K B 9 5 2 K B 9 7 0 K B 9 5 6 W

KB952 T R O M B O N E S TA N DA larger and taller version of the KB950.Adjustable height from 20¹/₂ - 43".

KB970 B A R I TO N E S TA N DWide base for extra stability.Adjusts from 29 - 32".

KB960 A LTO / T EN O R S TA N DTwo location body rest.Thick foam padding on yoke and body rest.Flute / clarinet doubling peg included.

K B 3 0 1 F

98

KB922 9" Extension acoustic guitar slat wall hanger.

K B 9 2 2

Hamilton and StagePRO guitar stands incorporate decades of design and innovation excellence. Beginning with the KB38, the world’s first hanging guitar stand, to the new 3 and 5 space portable guitar racks, we give your beloved ax the support it deserves.GUITAR

STANDS . ACCESSORIES

K B 3 0 3 G K B 3 1 5 G K B 3 5 0 0 G

KB303G CR A D L E G U I TA R S TA N DValue choice cradle guitar stand.Through-tube cradle mount.Fixed yoke.27 - 31" height adjustment.

KB3500G S U P ER G U I TA R S TA N DExtreme portability for guitars and basses, acoustic or electric.Three-leg support with hinged back stop folds very compactly.No knobs or latches.

KB5300G T H R EE I N S T R U M EN T R ACKUpper rail adjusts to fit basses to ukuleles. Bottom support rails adjust to fit different body sizes.Neck yokes slide for variable instrument locations.

KB5500GF I V E I N S T R U M EN T R ACKLarger version of KB5300G for five instruments

KB430G THREE INSTRUMENT MULTI-STANDSecure support with body cradles for each instrument. Cradles key into welded tube extensions. Folds for easy transport.

KB420G T WO I N S T R U M EN T M U LT I - S TA N DSimilar to KB430G but for two instruments.

K B 5 5 0 0 G K B 4 2 0 G

KB3000G N ECK S U S PEN D I N GHinged yoke, neck suspending guitar stand. Mushroom ends on yoke to secure guitar.Height adjustable from 24 - 36".

KB5000G ACO U S T I C / EL EC T R I C A - F R A M EUnique arm design accepts either acoustic or electric guitars. Friction lock for open and closed positions.

KB4100G A F R A M E G U I TA R S TA N D ( EL EC T R I C )Unique arm design for electric guitars. Friction locking in open and closed positions. Durable black powder coated finish. Heavy duty cushions and feet.

KB4000G A F R A M E G U I TA R S TA N D (ACO U S T I C )Unique arm design for acoustic guitars. Friction locking in open and closed positions. Durable black powder coated finish. Heavy duty cushions and feet.

KB315G CR A D L E G U I TA R S TA N DThrough-tube cradle mount.Larger diameter tubes with fixed yoke. 27 - 31" height adjustment.

KB315GC (not shown) CR A D L E G U I TA R S TA N DSame stand as the KB315G but with bright chrome plating.

K B 3 0 0 G

KB300GG U I TA R FO OT R E S THeight adjustable steel plate with non-slip rubber cushion for comfort. Legs securely lock into steel detents.

KB924 4¹/₂" Extension electric guitar pegboard hanger.

K B 9 24

K B 4 1 0 0 G K B 4 0 0 0 G K B 5 0 0 0 G

K B 5 3 0 0 G K B 4 3 0 G

Guitar Wall Hangers

K B 9 1 9 G

KB919G Simple guitar hanger for easy set-up to hold your guitar safely and conveniently on the wall with this compact and versatile hanger. The yoke automatically adjusts to fit the headstock your instrument.Satin rubber cushions on the yoke arms.Mounting hardware included.

K B 9 2 6

KB926 4¹/₂" Extension electric guitar slat wall hanger.

K B 9 2 0

KB920 9" Extension acoustic guitar pegboard hanger.

K B 3 0 0 0 G

From the aspiring star to the seasoned pro we can hold your mic any which way you’d like. Industry standard mic stands featuring steel construction, tough powder coated finishes with rugged clutches and fittings. Ready for anything.

KB240M E-T R I G G ER D I E C A S T B A S EPremium trigger operated height adjustment. The most ergonomically designed trigger grip available. Premium trigger operated height adjustment.Slim-line die cast base.

KB242M E-TRIGGER TRIPOD BASE WITH BOOMPremium trigger operated height adjustment. The most ergonomically designed trigger grip available. Tripod base with alloy aluminum hub. Fixed length boom.

KB241M (not shown)E-T R I G G ER T R I P O D B A S ESame stand as KB242M but without a boom.

KB229M T R I P O D B A S E W I T H B O O MProfessional quality. Alloy aluminum collet and base hub. Height adjusts from 39 - 66" (without boom)

KB235M S T R A I G H T D I E C A S T B A S EProfessional quality.Alloy aluminum collet. Slim-line die cast base.

MICSTANDS

KB220MT R I P O D B A S E W I T H B O O MNon-telescoping boom tripod base mic stand with plastic tuning clamp, aluminum alloy hub. US/Euro thread adapter included. Durable black powder coated finish.

10 11

KB810N U ER A L I G H T W E I G H T D E S K TO PUnique lightweight base design provides stability.Supplied with carrying bag and mic clip.

KB111M D I E C A S T B A S E D E S K TO PRectangular base.Height adjusts from 9 - 14".

KB110MD I E C A S T B A S E D E S K TO P Rectangular base.Height adjusts from 9 - 14".

KB121TM E X T R A S H O R T T R I P O D B A S E W I T H B O O MAlloy aluminum collet. Composite plastic hub. Height adjusts from 11³/₄ - 17³/₄".

K B 1 2 1 T M

K B 8 1 0

K B 1 1 1 M K B 24 0 M K B 2 3 5 M

K B 2 2 0 M

K B 24 2 M

K B 2 2 9 M

K B 1 1 0 M

KB203M F I X ED L EN G T H B O O MProfessional quality.Round pivot clamp section.30" length.

K B 2 0 3 M

K B 2 0 4 M

KB204MT EL E S CO PI N G B O O MTelescoping boom with round housing and slideable T-handle tension knob. US/Euro thread adapter included. Durable black powder coated finish.

KB815M N U ER A W I T H O F F S E T A DA P T ERCombination of KB810 and KB816M.

K B 8 1 5 M

Booms

12 13

KB60A T I LT- B ACK A M P S TA N DDual A-frame base.Height adjustable.Lifts amp off the floor.

K B 6 0

KB60 T H E “ U N I S TA N D ” A M PL I F I ER S TA N DMono-pod provides adjustable angle on cabinets up to 36" tall. Four preset adjustments for angle and cabinet size.Extremely compact - fits in the back of most cabinets.

KBDS-01D DJ S TA N DTwo tier professional DJ rack for professional artist. Multiple adjustments make it ideal for the busy artist. Upper arms with stops for secure mounting. Solid steel shelf. Flat mounting plates for table top or under coffin.

K B 6 0 A

K B D S - 0 1 D

STANDSAND ACCESSORIES

Built as tough as the stands they accessorize, StagePRO clips, windscreens and goosenecks provide reliable service gig after gig.

K B 7 1 5 S

KB715SD ELU X E S PE A K ER S TA N DAluminum base with reversible steel upper tube. Safety pin with retention chain. Height adjusts from 42 - 80"

KBC10M M I CR O PH O N E W I N D S CR EEN SFoam plastic fits snugly over most mic heads. Reduces unwanted pop, click and wind frequencies. Available in 6 colors. KBC10M-BK Black.KBC10M-GN Green. KBC10M-GR Grey.KBC10M-RD Red. KBC10M-OR Orange.KBC10M-BL Blue.

KBC1M . KBC2M . KBC4M . KBC6M . KBC9M M I CR O P H O N E CL I P SResilient plastic clips for a variety uses.KBC1M Clothes pin style.KBC2M Slim line tapered with 1" major and ⁷/₈" minor diameters.KBC4M Wireless clip for most systems.KBC6M Heavy elliptical with 1.1" major and 1" minor diameters.KBC9M Butterfly tapered with ⁷/₈" major and ³/₄" minor diameters.

KBC116M . KBC113M . KBC119M G O O S EN ECK S Flexible steel with male and female standard mic thread ends. Black powder coated or durable bright chrome. KBC119M 19" Black.KBC119MC 19" Chrome. KBC113M 13" Black.KBC113MC 13" Chrome.KBC116M 6" Black.KBC116MC 6" Chrome.

K B C 1 M

K B C 6 M - B K

K B C 2 M

K B C 9 M - B K

K B C 4 M

K B C 1 0 M - B K

K B C 1 0 M - R D

K B C 1 0 M - G N

K B C 1 0 M - O R

K B C 1 0 M - G R

K B C 1 0 M - B L

K B 1 1 6 M

K B 1 1 6 M C

K B 1 1 3 M

K B 1 1 3 M C

K B 1 1 9 M C

K B 1 1 9 M

K B C 2 0 M

KBC20MS T ER EO M I C A DA P T ERFor mounting multiple mics on one stand.Two mics to the outside and one in the center.

KBC40MS T ER EO M I C A DA P T ERFor mounting multiple mics on one stand.Four mics to the outside and one in the center.

K B C 4 0 M

14

K B 1 2 5 E - B K

K B 1 2 5 E - G R

K B 1 2 5 E - R D KB130E TABLET COMPUTER HOLDERFits tablets with a horizontal or vertical side that measures between 6 1/4" (159mm) and 8 1/4" (210mm). Unique design allows tablets to be mounted diagonally if desired.Includes a pivot adapter and a kickstand cushion. Ball joint pivot adapter provides a wide range of adjustment. Soft TPR removable cushion to grip surfaces when used as a kickstand.Includes a tube clamp. Adjusts to fit 5/8" to 1" diameter tubes. Plastic V-blocks grip the stand without leaving marks. Compact and easy to store.Includes a carry bag. Durable, thick velvet fabric with draw string and button lock. Fits the holder and all accessories.

KB125E SYSTEM X PHONE HOLDERS IN THREE COLORSUnique and cool smart phone holders. Puts essential musical “apps” right at the musician’s fingertips. Scissor-action clamping to hold most smart phones.

KB125E-BK Black.KB125E-GR Green.KB125E-RD Red.Includes tube clamp and goose neck.

K B 1 3 0 E

The gigging musicians and gear geeks here at Hamilton understand it’s the little things that make the biggest difference at rehearsals and gigs. We strive to design affordable, dependable gear. All the way down to the little things…STANDS

AND ACCESSORIES

15

KEYBOARDSTANDS AND ACCESSORIES

Extending the unique and useful System X engineered solutions comes the world’s first hybrid keyboard and DJ coffin stand!

K B 7 7 0 0 K

KB7700KS Y S T E M X K E Y B OA R D A N D DJ CO F F I N S TA N DPortability and simplicity without sacrificing stability. Fixed width of arms is independent of height so large keyboards and coffins remain stable. Attractive center column offers easy height adjustment.Folds easily and compactlyHeight adjusts from 24 - 37"

1716

K B 8 6 8 K

KB868K U N I V ER S A L ACCE S S O RY TA B L EAttaches to any "X" style keyboard stand or 2nd tier. Creates a desk-like platform for a wide variety of gear.Vented steel construction.

1918

KEYBOARDSTANDS AND ACCESSORIES

KB460 K E Y B OA R D TA B L EFull featured flat-top table style keyboard stand. Over-center locking arms keep the stand stable. Legs are height adjustable and width also adjusts.

KB505K K E Y B OA R D T H R O N ESecure locking of leg position with angled detent locators. Foam padding is covered by tough, tear-resistant vinyl. Features a reinforced steel structure.

KB515K D ELU X E K E Y B OA R D T H R O N ESecure locking with angled detent locators and tension knobs. Extra thick foam padding is covered by tough, tear-resistant vinyl. Reinforced steel structure.

K B 4 6 0 K B 5 1 5 K K B 5 0 5 K

Our wide range of keyboard stands and benches are designed to fit every home, stage or studio application. Durable steel construction with high quality cushions and stops ensure years of dependable service.

KB420K D ELU X E W EL D ED D O U B L E XWelded construction for stability and long life. Welded pivot plate with spring pin for height and width adjustment.Height adjusts from 26 - 39".Width adjusts from 13 - 34".

KB400K (not shown)S I N G L E XBolt-together construction; wrench included.Height adjusts from 26 - 39".Width adjusts from 10 - 34".

KBM3K M I N I X S T Y L E K E Y B OA R D S TA N DCompact and sturdy. Single X keyboard stand with locking pin. Height adjustable from 22 1/2" to 29 3/4".Width adjusts from 10 - 34".

KB865K D O U B L E X K E Y B OA R D S TA N DBolt-together construction.5 position spring loaded pin for secure positioning.Height adjusts from 24 - 34".Width adjusts from 11 - 32".

K B 4 2 0 K K B 8 6 5 K K B M 3 K

KB4000K T R I G G ER D O U B L E XTrigger operation for fast set-up and positioning. Adjustable rubber upper support arm sleeves can be positioned to fit virtually any keyboard.

K B 4 0 0 0 K

Due to limitations in photography, illustrated color may vary slightly from actual color.

w w w . h a m i l t o n s t a n d s . c o m