muro - for the simultaneous casting of foundation beams and the slab

8/12/2019 Muro - for the simultaneous casting of foundation beams and the slab

1/10

Disposable formworks for

the simultaneous casting of

foundation beams and the slab

www.daliform.com


2/10

Water, collection tanks

Foundations

KEY:

SWITCHBOARD

Telephone Fax

+39 0422 2083 +39 0422 800234

FOREIGN COMMERCIAL SECRETARY OFFICE

Telephone Fax e-mail+39 0422 208311 +39 0422 800234 [email protected]

TECHNICAL SECRETARY OFFICE

Telephone Fax e-mail

+39 0422 208350 +39 0422 800234 [email protected]


3/101

Cassaforma Muro (Wall formwork) was designed as an

alternative to traditional wood shuttering, which permits

casting walls at a height, reversed beams and foundation

bases, drastically reducing the time for creating the

foundation.

This disposable formwork consists of a combination of pipes,

panels, collars and stirrups all made of polypropylene.

In combination with the Atlantis system, the Wall

formwork makes it possible to create foundation beams

and a slab, which optimises and speeds up the work in the

building site, with considerable economic implications.

For this reason this system is greatly appreciated for the

creation of water collection and/or dispersion tanks, which

are always needed in various construction contexts.

Due to its easy, quick positioning, it is also perfectly suited for

creating ribbed rafts, where the empty spaces between the

beams are filled by Atlantis System formworks.

variable height from 56 cm to 150 cm


4/10

For the creation, in a single solution, of an upper slab (cavities) and internal and

perimetric foundation beams for a structure.

For the creation of ribbed rafts (structures not used often normally due to the

excessive work of shuttering and deshuttering).

For the creation of water dispersion and/or collection tanks.

For any project that requires, for a variety of reasons, elaborate and geometrically

complex shuttering.

Advantages

Applications

Muro formwork in coherence with its purpose,which is quick and easy work in the construction site, is characterised by simple, lightweight

parts that permit intuitive and quick assembly with multiple advantages:

Less time used for shuttering and deshuttering.

Saving time in cleaning the planking, which will be smooth and clean.

Saving time and expenses related to storing, depositing and transporting formworks; the material is not bulky and is not affected by bad weather.

A specialised workforce is not required.

Simultaneous casting of the foundation beams and slab if combined with the Atlantis system.


5/10

Technical data

Atlantis heightStirrups

Pcs/lm*

Collars

Pcs/lm*

Inner Stirrups

Pcs/lm*

Panel

lm/lm*

60 2 2 2 1,0

70 2 2 2 1,3

80 4 4 2 1,5

90 4 4 2 1,7

100 4 4 2 2,0

110 4 4 2 2,0

120 4 4 2 2,3

130 6 6 2 2,5

140 6 6 2 2,7

150 6 6 2 3,0

Panel

* Linear metres in reference to the length of each formwork wall.

Component quantity table based on the height of the Atlantis unit

Supply and installation cost grid

2 Collar supply no/lm 2

1 Supply of the Wall panel for Atlantis h=76cm m2/lm 0.700

3 Supply of the lower stirrup no./lm 2

4 Supply of the intermediate stirrup no./lm 2

5 Supply and positioning of the connection forks Kg/lm

6 Dry positioning of the Wall formwork and accessories hours 0.010

Total cost d/m2

No. Item U.M. Quantity/m2 Unit price Total

Wall panel

Stirrups bracket Collar

50 cm

50 cm

Intermediate Stirrups

The Wall panel can be easily adopted inheight and width to project needs with asimple yard tool, guarateeing maximumassembly speed and flexibility.


6/106

Application examples

Daliform Group technical office

The technical consultancy is only valid for the Daliform Group construction systems.

To contact the technical office: Tel. +39 0422 208350 - [email protected]

To obtain updated technical cards, support material, new photos and case studies, go to www.daliform.com

FEASIBILITY STUDY

Predimensioning and optimisation of the structures, comparative and/or revised

proposals, material and manpower estimates, cost analysis.

Evaluation of forced ventilation in the case of cold rooms.

SUPPORT FOR THE EXECUTIVE DESIGN

Support by design professionals. Upon request, the formwork positioning plan

can be supplied with a list of the products required to carry out the work and the

relative accessories.

CALCULATION REPORT

Reports certifying the execution of Daliform Group constructive systems.

ON-SITE SUPPORT

If necessary, our technical staff can be present on-site to help the construction

company during the operational phase.

Perimeter section of the cavity with Atlantis and Muro.

Intermediate foundation section with cut formworks.


7/10

Construction details showing the various solutions targeted towards compensating structures if the inner dimensions of

the under-fl oor cavity are not exact multiples of the Atlantis formwork.

Creating a foundation and under-floor cavity with Muro and Atlantis Formworks

Placing the foundation reinforcements on the

prepared light concrete base.

After assembling the first Atlantis formworks,

position the intermediate stirrups on the panel

and then connect the stirrups and collars of

the opposing pillars with the steel forks (to be

prepared in the construction site).

Nailing along the inner and perimetric foundation

beams of the lower stirrups and pipe base at an

equal distance, approx. every 50 cm.

Position other panels on top, always fastening

them with stirrups and collars, based on the

necessary height to be reached. Complete

assembling the Atlantis modules and plugging

up the side that remained open in the formwork

along the perimeter with polystyrene panels.

Place the initial panel by inserting it in the guide

of the lower stirrups and fasten it on the top with

the collars inserted on the pillars.

Start casting the concrete starting from the

pillars, continuing with the curbs and the slab.

1

4

2

5

3

6

Loading and breaking test certifi ed by the Univeristy of Padua.

Environmental Compatibility Certifi cation (CCA).

Member of the Italian Green Building Council. System certifi cation pursuant to SA Standard 8000.

Certifications


8/10

Specifi cations

Creat ion of a lightened raf t in reinforced co nc rete wi th a total thickn ess o f ______ cm . The formw ork sp ace s w i ll be created o n si te through

the combined use o f recyc led p last i c formworks, such as Atlantis and Wall formwork f rom the Dal i form Group. The project wi l l be

carr ied out as sp ec ified be low:

a )Sup ply and laying o f steel bars and we lde d m esh to create the first slab o n the g round , and the vert ical st if feners ( internal and perimeter

plates) for the raft . Price euro/k g ____________

b) Format ion of the first slab on the ground for the l ightened raf t through the supply and pouring of concrete, resistance class 20/25 to a

height of cm ______ sui tably vibrated an d finished w i th a st raight ed ge o utside of the vert ical cag es for the inner and p erime tric s ubd ivision

of the raft, constituting the vert ical st i f feners.

Price euro/k g ____________

c)Format ion of the formw ork nec essa ry for creat ing the vert ical st if feners o f the lightened raf t in reinforced co ncrete throug h the sup ply and

po si toning of vertical dispo sab le formw ork suc h as the Wa ll formw ork f rom the Dalifo rm Group con s is t ing o f c ane honeyc om b p anels

in polypropylene, 50 x 200 cm thickness 1 cm weight 3kg/Pcs, including intermediate polypropylene st i rrups, col lars for polypropylene

Atlantis pipes, inner 110mm, lower polypropylene st i rrups for anchoring to the ground, wi th nai ls, of the steel C shaped spacerst i rrups to restrain the pressure of the concrete, nai ls and consumables needed for an ef fecient and quick cast ing phase. Including

expe nses for aligning w i th the w ork for placing the ho rizontal Atlantis fo rmwo rk.

Per face Price euro/kg ____________

d) Format ion of the formwork necessary to construct the upper port ion of the horizontal closure of the l ightened raf t through the supply

and p osi t ioning of the Atlantis dispo sable formw orks in recycled p lastic f rom the Dal iform G roup. The format ion w il l be carried out at the

sam e t ime as the installat ion of the Wa ll formw ork (vert ic al st i ffeners ) for the external bord ering; the Atlantis fo rmw ork is formed by the

ordered suc ces sion, in a cloc kwise d i rect ion, of the Igl mo dules f rom the Dalifo rm Group, w hose ed ges o ver lap b y a t least 3 c m, w ith

cu rved fork feet and d imensions eq ual to one q uarter of the pipe, for a bayone t conn ec t ion on the e dg e of a supp lied , vertical ly pos it ione d

pipe w ith an externa l of 11 0 mm and th ickness o f 1 .8 m m onto w hich a prev ious ly suppl ied flat c losure foot , w i th s lo ts aga inst the ground

and two opposed vert ical pre-f ractures in the housing guide, wi l l be hooked to the other end. Instal lat ion centre distance between the

vert ical sup po rt pipes to the Igl m odule , 50 cm a long two p erpendicu lar d irec t ions. Tota l max he ight o f the b ase for the formw ork cm

__ __ __ ; th e c o s t fo r t he c re at ion o f h o les w ith th e d im ens ions an d sec tio ns fo re seen b y th e arc h ite c tu ra l d raw ings is inc lud ed . Th e p ric e is

co nsidered as including and c overing al l co sts for providing the finished wo rk in a wo rkmanl ike m anner. It mus t be p oss ible to safely walk

on the ho rizontal Atla ntis mo dules and they m ust be cer t ified to res is ts a load o f 15 0 kg in the weakest po in t w i th tes t pressure on the

square sup port o f 8 x 8 cm ; they must not re lease p o l lu t ing sub stances and have an Environmenta l Comp a tibility C ertific a tion and be

produc ed by a com pany that is equ ipped w ith an In tegrated Managem ent System (ISO 9001, ISO 14001, OHSAS 18001, S A 8000);

the com pany supp ly ing the Atlantis m odules m ust repor t const ruct ive ly to the d es igner and the yard m anager upon supp ly and pr ior to

the creat ion of the slab, adapt ing their product to the execut ive design, integrat ing i t when necessary, the company must also exhibi t the

produc t cer t ificate app roved by an EOTA mem be r a g enc y (European Organisation for Technical Approvals).

Price euro/kg ____________

e)Supply and laying of steel bars and welded mesh to create the upper slab of the l ightened raf t to be placed on the to p o f the horizonta l

fo rmw ork Atlantis w ith the raft 's vert ica l s t i f fners ( in ternal and p erim eter p lates) passing abo ve.


f)Supply and pouring of concrete, resistance class C25/30, first for fil l ing the Wall formworks (which form the vert ical st i f fners, that is,

the inner and p erime tric d ivisions of the raf t) and s ubs equ ent co nt inous po uring of the co nc rete on the horizontal plat form o f Atlantis

formw orks, wh ich first saturates the pipes and then creates the up per slab of the raf t unt i l a minimu m thicknes s is obtained f rom the top of

the Atla ntis formworks of cm ______ sui tably vibrated and finished wi th a st raight edge.


The information contained in this catalogue cou ld be changed. Before placing an order, request a confirmation or updated information from the DALIFORM

GROUP, which reserves the right to make changes at any moment without notice. In consideration of recycled material, it is specified that there are

tolerance margins caused by environmental factors.


9/10


10/10

www.daliform.com

DG_

MU

-Rev.

03_

07-12

Tel. +39 0422 2083 - Fax +39 0422 800234

[email protected] - www.daliform.com

Via Serenissima, 30 - 31040

Gorgo al Monticano (TV) - Italy

Socio del GBC Italia.

muro - for the simultaneous casting of foundation beams and the slab

Documents