multipurpose usage list of s 2 c abpf type cutter …...more option, more possibility the insert of...
TRANSCRIPT
New Produc t News No.1708E-1 2019-4
Clamp screw Parts Screw driver / Wrench Screw anti-seizure agent
581-140581-141581-142581-143
581-144
581-145
581-146
581-147
581-147
0.51.12.24.9
4.9
6.9
9.8
9.8
9.8
104-T6104-T8104-T10
105-T20
101-T25S
105-T30A
AAA
B
B
B
P-37
Cutter Body
Shape
A B
Fasteningtorque(N・m)
ABPF06S (W/WL )ABPF08S (L/W/WL/WL /WLT )ABPF10S (L/W/WL/WL /WLT )ABPFM10ABPF12S (L/W/WL/WL /WLT )ABPFM12ABPF16S (L/W /WL /WE/WE /WLT )ABPFU16W220 ABPFM16ABPF20S (L/W /WL /WE/WE /WLT )ABPF20MT2 ABPFU20W270 ABPFM20ABPF25S (L/W /WL /WE/WE /WLT )ABPF25MT3 ABPFU25W300 ABPFM25ABPF30S (L/W /WL /WE/WE /WLT )ABPF30MT4 ABPFU30W300 ABPFM30ABPF32S (L/W /WL /WE )ABPF32MT4 ABPFM32
Shape
2019-4(K)2017-4:FP
Clean the insert seat:Using air-blow or alike, clean the seat.1
Put in the insert with its top positioned to the screw-tightening side of the tool body.2
This is the end of insert set-up.4
Clamp screw (high precision screw)
Tool body
Top mark
Tighten the clamp screw with the special wrench.Please do not press down the insert during this tightening process.
3
In order to satisfy runout of 0.02mm or less, follow the procedure at left.
Note Cutting conditions and suggested retail price are referred in product catalogue or product newsABPF:No.0902 ARPF:No.0901 GP1LB:No.1711 GP1T:No.1711
L1 L1 L1 L1
ABPF ARPF GP1LB GP1T
Head figure of each insert
ABPFU16W220ABPFU20W270ABPFU25W300ABPFU30W300
16202530
39.651.661.373.2
-516173
43566770.2
39516173
ZDFG160…/ZPFG160… ZDFG200…/ZPFG200… ZDFG250…/ZPFG250… ZDFG300…/ZPFG300…
ZCFG160… ZCFG200… ZCFG250… ZCFG300…
-ZPHW200-LB20ZPHW250-LB25ZPHW300-LB30
ZDHW160-T43-R1.5-40 ZDHW200-T43-R2-50 ZDHW250-T43-R2.5-62.5 ZDHW300-T43-R3-75
15192429
181219239227
15182328
Item codeTooldia.Dc(mm)
Underneck
lengthL1
(mm)
InsertUnderneck
lengthL1
(mm)
Underneck
lengthL1
(mm)
InsertUnderneck
lengthL1
(mm)
Insert Insert
φD2
(mm)
ShanklengthRs(mm)
Shankdia.DS(mm)
Under neck length of each item
s
φD
c
L1 R
ABPF(Ball) ARPF(Radius) GP1LB(Special shape) GP1T(Special shape)
3
φD
s
φD
2
Carbide shank (Under neck type)
Parts
Set-up Procedures of Inserts
The diagrams and table data are examples of test results, and are not guaranteed values.“ ” is registered trademarks of Mitsubishi Hitachi Tool Engineering, Ltd. in Japan.
Specifications for the products listed in this catalog are subject to change without notice due to replacement or modification. Printed in JAPAN
Printed using vegetable oil ink.
Official Web Site
Database for selection Cutting Tool Products 【TOOL SEARCH】
http://www.mmc-hitachitool.co.jp/e/Head OfficeHulic Ryogoku Bldg. 8F, 4-31-11, Ryogoku, Sumida-ku, Tokyo, 130-0026 JapanInternational Sales Dept. : TEL +81-3-6890-5103 FAX +81-3-6890-5128
MMC Hitachi Tool Engineering Europe GmbHItterpark 12, 40724 Hilden,Germany. Tel +49-(0)2103-24820 Fax +49-(0)2103-248230
MITSUBISHI MATERIALS U.S.A. CORPORATIONDETROIT OFFICE Customer service41700 Gardenbrook Road, Suite 120, Novi, MI 48375-1320 U.S.A.Tel +1(248) 308-2620 Fax +1(248) 308-2627CHICAGO OFFICE1314B North Plum Grove Road, Schaumburg, IL 60173 U.S.A. Tel +1(847) 252-6371 Fax +1(248) 308-2627
MMC METAL DE MEXICO, S.A. DE C.V.IAv. La Cañada No.16, Parque Industrial Bernardo Quintana, El Marques,Querétaro, CP 76246, MéxicoTel +52-442-1926800
MMC Hitachi Tool Engineering(Shanghai),Ltd.Room 2604-2605, Metro Plaza, 555 Loushanguan Road, Changning Disctrict, Shanghai, 200051, CHINA Tel +86-(0)21-3366-3058 Fax +86-(0)21-3366-3050
MMC Hardmetal(Thailand)Co.,Ltd. HT-DivisionCTI Tower 24 Floor, 191/32 Ratchadapisek Road, Klongtoey, Klongtoey, Bangkok 10110, Thailand Tel: +66-(0)2-661-8170 Fax: +66-(0)2-661-8175
Hitachi Metals (India) Pvt. Ltd.Plot No 94 & 95,Sector 8, IMT Manesar ,Gurgaon-122050 , Haryana, India Tel +91-124-4812315 Fax +91-124-2290015
Search Web
DISTRIBUTED BY:
Europe China
America
Mexico
Thailand
India
Attentions on Safety
1. Attentions regarding handling(1)When removing the tool from the case(package), be careful not to drop it on your foot or drop it onto the tips of your bare fingers.(2)When actually setting the inserts, be careful not to touch the cutting flute directly with your bare hands.
2. Attentions regarding mounting(1)When preparing for use, be sure that the inserts are firmly mounted in place and that they are firmly mounted on the arbor, etc.(2)If abnormal chattering occurs during use, stop the machine immediately and remove the cause of the chattering.
3. Attentions during use(1)Before use, confirm the dimensions and direction of rotation of the tool and milling work material.(2)The numerical values in the standard cutting conditions table should be used as criteria when starting new work. The cutting conditions should be adjusted as
appropriate when the cutting depth is large, the rigidity of the machine being used is low, or according to the conditions of the work material.(3)The inserts are made of a hard material. During use, they may break and fly off. In addition, cutting chips may also fly off. Since there is a danger of injury to
workers, fire, or eye damage from such flying pieces, a safety cover should be installed and safety equipment such as safety glasses should be worn to create a safe environment for work.・Do not use where there is a risk of fire or explosion.・Do not use non-water-soluble cutting oils. Such oils may result in fire.
(4)Do not use the tool for any purpose other than that for which it is intended, and do not modify it.
Multipurpose usage list of ABPF type cutter body
05
More option, more possibility More option, more possibility The insert of ARPF, GP1LB and GP1T is able to set onto ABPF type cutter body.
GP1LBGP1LB
· Joint usage4 different types of insert fits into one cutter body.
· More optionSteel & carbide shank type would be additional choice for the item which had limited in modular type.
· Cost reductionCost of the cutter body will be reduced by sharing.
· High rigid clamping systemOriginal V-shaped clamping system & special screw(patented) brings out stable performance in each different insert geometry.
Special shapedtool.Big-R shaped lens & barrel edges shorten the finishing time drastically.
GP1TGP1TSpecial shapedtool.Maximize the advantage of 5-axis milling, one tool fits in two different processes.
ABPFABPFHigh precision
ball tool.High helix geometry provides lower cutting force and longer tool life in various work materials.
ARPFARPFHigh precision
radius tool.Original edge geometries cover up from semi-finishing to precise finishing process.
Modular type
Steel shank (MT shank)
Carbide shankSteel shank
ABPF06S10 ABPF08S12 ABPF10S12 ABPF12S12 ABPF16S20 ABPF20S25 ABPF25S32 ABPF30S32 ABPF32S32 ABPF08S12L ABPF10S16L ABPF12S16L ABPF16S20L ABPF20S25L ABPF20S20L120 ABPF20S20L150 ABPF25S32L ABPF25S32L150 ABPF30S32L ABPF30S32L150 ABPF30S32L200 ABPF32S32L
68
101216202530328
101216202020252530303032
3022.225.330.650.660.670.380.290.250.250.360.665.680.6
120.6150.690.3
150.3100.2150.2200.2100.2
- - - - - 607080- - - - - 80
12015090
150100150200
-
- - - 34.5 54 65 76 87.2 - - - 64.5 69 85 125 155 96 156 107.2 157.2 207.2 -
----
2.7°2.9°3.5°0.9°
---
2.1°2.0°2.1°
--
2.6°1.5°0.7°0.5°0.3°
-
-----
2.9°3.5°1.2°
-----
2.1°--
2.6°1.5°0.7°0.5°0.3°
-
3022253050607080905050606580
12015090
150100150200100
4.3°6.4°2.9°
-2.8°2.9°3.5°1.2°
-2.5°3.9°2.2°2.1°2.1°
--
2.6°1.5°0.7°0.5°0.3°
-
4.1°5.8°2.6°
-2.6°2.7°3.3°0.9°
-2.4°3.7°2.0°1.9°2.0°
--
2.5°1.5°0.7°0.5°0.3°
-
ZDFG06…/ZPFG06… ZDFG080…/ZPFG080…ZDFG100…/ZPFG100…ZDFG120…/ZPFG120…ZDFG160…/ZPFG160…ZDFG200…/ZPFG200…ZDFG250…/ZPFG250…ZDFG300…/ZPFG300…ZDFG320…/ZPFG320…ZDFG080…/ZPFG080…ZDFG100…/ZPFG100…ZDFG120…/ZPFG120…ZDFG160…/ZPFG160…ZDFG200…/ZPFG200…ZDFG200…/ZPFG200…ZDFG200…/ZPFG200…ZDFG250…/ZPFG250…ZDFG250…/ZPFG250…ZDFG300…/ZPFG300…ZDFG300…/ZPFG300…ZDFG300…/ZPFG300…ZDFG320…/ZPFG320…
ZCFG06… ZCFG080… ZCFG100… ZCFG120… ZCFG160… ZCFG200… ZCFG250… ZCFG300… ZCFG320… ZCFG080… ZCFG100… ZCFG120… ZCFG160… ZCFG200… ZCFG200… ZCFG200… ZCFG250… ZCFG250… ZCFG300… ZCFG300… ZCFG300… ZCFG320…
-----
ZPHW200…ZPHW250…ZPHW300…
-----
ZPHW200…ZPHW200…ZPHW200…ZPHW250…ZPHW250…ZPHW300…ZPHW300…ZPHW300…
-
- - - ZDHW120… ZDHW160… ZDHW200… ZDHW250… ZDHW300… - - - ZDHW120… ZDHW160… ZDHW200… ZDHW200… ZDHW200… ZDHW250… ZDHW250… ZDHW300… ZDHW300… ZDHW300… -
AAABAAAABAAAAABBABABBB
5078758080808080808010010095100100100110100120100100120
10121212202532323212161620252020323232323232
Item codeTooldia.Dc(mm)
Underneck
lengthL1
(mm)
InsertInterferenceangle
θn
Underneck
lengthL1
(mm)
Interferenceangle
θn
Underneck
lengthL1
(mm)
Interferenceangle
θnInsert
Underneck
lengthL1
(mm)
Interferenceangle
θnInsert Insert
Bodytype
ShanklengthRs(mm)
Shankdia.DS(mm)
Reg
ular
Type
Und
er n
eck
long
ABPF(Ball) ARPF(Radius)Under neck length and interference angle of each item
GP1LB(Special shape) GP1T(Special shape)
s
φD
c
φD
s
θn
L1 R s
φD
c
φD
s
L1L1
R
θn
L1 L1 L1
ABPFA type B type ARPF GP1LB GP1T
ABPFM10ABPFM12ABPFM16ABPFM20ABPFM25ABPFM30ABPFM32
10121620253032
26.326.632.638.638.343.243.2
---
383843-
-30.536434450.2 -
26263238384343
ZDFG100…/ZPFG100… ZDFG120…/ZPFG120… ZDFG160…/ZPFG160… ZDFG200…/ZPFG200… ZDFG250…/ZPFG250… ZDFG300…/ZPFG300… ZDFG320…/ZPFG320…
ZCFG100… ZCFG120… ZCFG160… ZCFG200… ZCFG250… ZCFG300… ZCFG320…
---
ZPHW200-LB20ZPHW250-LB25ZPHW300-LB30
-
- ZDHW120-T43-R1.2-30 ZDHW160-T43-R1.5-40 ZDHW200-T43-R2-50 ZDHW250-T43-R2.5-62.5 ZDHW300-T43-R3-75 -
9.89.8
12.817.820.828.828.8
14.514.51719222323
M6M6M8M10M12M16M16
Item codeTooldia.Dc(mm)
Lf
(mm)Insert
Lf
(mm)
Lf
(mm)Insert
Lf
(mm)Insert Insert
φDb ConnectionpartL2
(mm)
MABPF(Ball) ARPF(Radius)Under neck length of each item
GP1LB(Special shape) GP1T(Special shape)
Lf Lf Lf Lf
ABPF ARPF GP1LB GP1T
φD
c
φD
b
L f
L2
M
L1 L1 L1 L1
ABPF ARPF GP1LB GP1T
φD
c
M
MT shank
L1 sR
ABPF06S06WABPF06S06WL65ABPF08S08WABPF08S08WLABPF08S08WL95ABPF08S08WLT75ABPF10S10WABPF10S10WLABPF10S10WL95ABPF10S10WL140ABPF10S12WLT75ABPF12S12WABPF12S12WLABPF12S12WL100ABPF12S12WL120ABPF12S12WL150ABPF12S16WLT85ABPF16S16W60ABPF16S16WL80ABPF16S16WL100ABPF16S16WEABPF16S16WE150ABPF16S20WLT100ABPF20S20W80ABPF20S20WL100ABPF20S20WL120ABPF20S20WEABPF20S20WE220ABPF20S25WLT115ABPF25S25W100ABPF25S25WL120ABPF25S25WL150ABPF25S25WEABPF25S32WLT135ABPF30S32W100ABPF30S32W120ABPF30S32WL150ABPF30S32WEABPF30S32WLT160ABPF32S32W120ABPF32S32WL150ABPF32S32WE220
668888
101010101012121212121216161616161620202020202025252525253030303030323232
2565
30.265.295.275.235.375.395.3
140.375.345.685.6
100.6120.6150.685.660.680.6
100.6120.6150.6100.680.6
100.6120.6150.6220.6115.6100.3120.3150.3190.3135.3100.2120.2150.2230.2160.2120.2150.2220.2
-----------------------80
100120150220115100120150190135100120150230160
---
- - - - - - - - - - - 49.5 89.5 104.5 124.5 154.5 89.5 64 84 104 124 154 104 85 105 125 155 225 120 106 126 156 196 141 107.2 127.2 157.2 237.2 167.2 - - -
----------------
1.5°-----
1.3°-----
1.4°----
1.7°0.7°0.6°0.4°0.3°0.4°
---
----------------------------
1.4°----
1.7°0.7°0.6°0.4°0.3°0.4°
---
256530659575357595
140754585
100120150856080
10012015010080
100120150220115100120150190135100120150230160120150220
-----
1.7°----
0.9°-----
1.5°-----
1.3°-----
1.4°----
1.7°0.7°0.6°0.4°0.3°0.4°
---
-----
1.6°----
0.8°-----
1.5°-----
1.2°-----
1.4°----
1.6°0.7°0.6°0.4°0.3°0.4°
---
ZDFG06…/ZPFG06… ZDFG06…/ZPFG06… ZDFG080…/ZPFG080… ZDFG080…/ZPFG080… ZDFG080…/ZPFG080… ZDFG080…/ZPFG080… ZDFG100…/ZPFG100… ZDFG100…/ZPFG100… ZDFG100…/ZPFG100… ZDFG100…/ZPFG100… ZDFG100…/ZPFG100… ZDFG120…/ZPFG120… ZDFG120…/ZPFG120… ZDFG120…/ZPFG120… ZDFG120…/ZPFG120… ZDFG120…/ZPFG120… ZDFG120…/ZPFG120… ZDFG160…/ZPFG160… ZDFG160…/ZPFG160… ZDFG160…/ZPFG160… ZDFG160…/ZPFG160… ZDFG160…/ZPFG160… ZDFG160…/ZPFG160… ZDFG200…/ZPFG200… ZDFG200…/ZPFG200… ZDFG200…/ZPFG200… ZDFG200…/ZPFG200… ZDFG200…/ZPFG200… ZDFG200…/ZPFG200… ZDFG250…/ZPFG250… ZDFG250…/ZPFG250… ZDFG250…/ZPFG250… ZDFG250…/ZPFG250… ZDFG250…/ZPFG250… ZDFG300…/ZPFG300… ZDFG300…/ZPFG300… ZDFG300…/ZPFG300… ZDFG300…/ZPFG300… ZDFG300…/ZPFG300… ZDFG320…/ZPFG320… ZDFG320…/ZPFG320… ZDFG320…/ZPFG320…
ZCFG06… ZCFG06… ZCFG080… ZCFG080… ZCFG080… ZCFG080… ZCFG100… ZCFG100… ZCFG100… ZCFG100… ZCFG100… ZCFG120… ZCFG120… ZCFG120… ZCFG120… ZCFG120… ZCFG120… ZCFG160… ZCFG160… ZCFG160… ZCFG160… ZCFG160… ZCFG160… ZCFG200… ZCFG200… ZCFG200… ZCFG200… ZCFG200… ZCFG200… ZCFG250… ZCFG250… ZCFG250… ZCFG250… ZCFG250… ZCFG300… ZCFG300… ZCFG300… ZCFG300… ZCFG300… ZCFG320… ZCFG320… ZCFG320…
-----------------------
ZPHW200…ZPHW200…ZPHW200…ZPHW200…ZPHW200…ZPHW200…ZPHW250…ZPHW250…ZPHW250…ZPHW250…ZPHW250…ZPHW300…ZPHW300…ZPHW300…ZPHW300…ZPHW300…
---
-----------
ZDHW120…ZDHW120…ZDHW120…ZDHW120…ZDHW120…ZDHW120…ZDHW160…ZDHW160…ZDHW160…ZDHW160…ZDHW160…ZDHW160…ZDHW200…ZDHW200…ZDHW200…ZDHW200…ZDHW200…ZDHW200…ZDHW250…ZDHW250…ZDHW250…ZDHW250…ZDHW250…ZDHW300…ZDHW300…ZDHW300…ZDHW300…ZDHW300…
---
BBBBBABBBBABBBBBABBBBBABBBBBABBBBABBBBABBB
65557065656565656580656565
1008070657080
10080706580
1201001008080
1201001001108080
1001001208080
10080
66888
12101010101212121212121616161616162020202020202525252525323232323232323232
Item codeTooldia.Dc(mm)
Underneck
lengthL1
(mm)
InsertInterferenceangle
θn
Underneck
lengthL1
(mm)
Interferenceangle
θn
Underneck
lengthL1
(mm)
干渉角θn
Interferenceangle
InsertUnderneck
lengthL1
(mm)
Interferenceangle
θnInsert Insert
Bodytype
ShanklengthRs(mm)
Shankdia.DS(mm)
Under neck length and interference angle of each item
s
φD
c
φD
s
θn
L1 R s
φD
c
φD
s
L1L1
R
θn
L1 L1 L1
ABPFA type B type ARPF GP1LB GP1T
ABPF(Ball) ARPF(Radius) GP1LB(Special shape)GP1T(Special shape)
ABPF20MT2ABPF25MT3ABPF30MT4ABPF32MT4
20253032
65.685.3
115.2115.2
6585
115-
70 91 122.2 -
6585
115115
ZDFG200…/ZPFG200…ZDFG250…/ZPFG250…ZDFG300…/ZPFG300…ZDFG320…/ZPFG320…
ZCFG200… ZCFG250… ZCFG300… ZCFG320…
ZPHW200-LB20ZPHW250-LB25ZPHW300-LB30
-
ZDHW200-T43-R2-50ZDHW250-T43-R2.5-62.5ZDHW300-T43-R3-75 -
MT2MT3MT4MT4
64 81 102.5 102.5
M10M12M16M16
Item codeTooldia.Dc(mm)
Underneck
lengthL1
(mm)
InsertUnderneck
lengthL1
(mm)
Underneck
lengthL1
(mm)
Insert Underneck
lengthL1
(mm)
Insert Insert
MTNo.
ShanklengthRs(mm)
M
Under neck length of each itemABPF(Ball) ARPF(Radius) GP1LB(Special shape) GP1T(Special shape)
03 0402
Head figure of each insert
Head figure of each insert
Head figure of each insert
Head figure of each insert
More option, more possibility More option, more possibility The insert of ARPF, GP1LB and GP1T is able to set onto ABPF type cutter body.
GP1LBGP1LB
· Joint usage4 different types of insert fits into one cutter body.
· More optionSteel & carbide shank type would be additional choice for the item which had limited in modular type.
· Cost reductionCost of the cutter body will be reduced by sharing.
· High rigid clamping systemOriginal V-shaped clamping system & special screw(patented) brings out stable performance in each different insert geometry.
Special shapedtool.Big-R shaped lens & barrel edges shorten the finishing time drastically.
GP1TGP1TSpecial shapedtool.Maximize the advantage of 5-axis milling, one tool fits in two different processes.
ABPFABPFHigh precision
ball tool.High helix geometry provides lower cutting force and longer tool life in various work materials.
ARPFARPFHigh precision
radius tool.Original edge geometries cover up from semi-finishing to precise finishing process.
Modular type
Steel shank (MT shank)
Carbide shankSteel shank
ABPF06S10 ABPF08S12 ABPF10S12 ABPF12S12 ABPF16S20 ABPF20S25 ABPF25S32 ABPF30S32 ABPF32S32 ABPF08S12L ABPF10S16L ABPF12S16L ABPF16S20L ABPF20S25L ABPF20S20L120 ABPF20S20L150 ABPF25S32L ABPF25S32L150 ABPF30S32L ABPF30S32L150 ABPF30S32L200 ABPF32S32L
68
101216202530328
101216202020252530303032
3022.225.330.650.660.670.380.290.250.250.360.665.680.6
120.6150.690.3
150.3100.2150.2200.2100.2
- - - - - 607080- - - - - 80
12015090
150100150200
-
- - - 34.5 54 65 76 87.2 - - - 64.5 69 85 125 155 96 156 107.2 157.2 207.2 -
----
2.7°2.9°3.5°0.9°
---
2.1°2.0°2.1°
--
2.6°1.5°0.7°0.5°0.3°
-
-----
2.9°3.5°1.2°
-----
2.1°--
2.6°1.5°0.7°0.5°0.3°
-
3022253050607080905050606580
12015090
150100150200100
4.3°6.4°2.9°
-2.8°2.9°3.5°1.2°
-2.5°3.9°2.2°2.1°2.1°
--
2.6°1.5°0.7°0.5°0.3°
-
4.1°5.8°2.6°
-2.6°2.7°3.3°0.9°
-2.4°3.7°2.0°1.9°2.0°
--
2.5°1.5°0.7°0.5°0.3°
-
ZDFG06…/ZPFG06… ZDFG080…/ZPFG080…ZDFG100…/ZPFG100…ZDFG120…/ZPFG120…ZDFG160…/ZPFG160…ZDFG200…/ZPFG200…ZDFG250…/ZPFG250…ZDFG300…/ZPFG300…ZDFG320…/ZPFG320…ZDFG080…/ZPFG080…ZDFG100…/ZPFG100…ZDFG120…/ZPFG120…ZDFG160…/ZPFG160…ZDFG200…/ZPFG200…ZDFG200…/ZPFG200…ZDFG200…/ZPFG200…ZDFG250…/ZPFG250…ZDFG250…/ZPFG250…ZDFG300…/ZPFG300…ZDFG300…/ZPFG300…ZDFG300…/ZPFG300…ZDFG320…/ZPFG320…
ZCFG06… ZCFG080… ZCFG100… ZCFG120… ZCFG160… ZCFG200… ZCFG250… ZCFG300… ZCFG320… ZCFG080… ZCFG100… ZCFG120… ZCFG160… ZCFG200… ZCFG200… ZCFG200… ZCFG250… ZCFG250… ZCFG300… ZCFG300… ZCFG300… ZCFG320…
-----
ZPHW200…ZPHW250…ZPHW300…
-----
ZPHW200…ZPHW200…ZPHW200…ZPHW250…ZPHW250…ZPHW300…ZPHW300…ZPHW300…
-
- - - ZDHW120… ZDHW160… ZDHW200… ZDHW250… ZDHW300… - - - ZDHW120… ZDHW160… ZDHW200… ZDHW200… ZDHW200… ZDHW250… ZDHW250… ZDHW300… ZDHW300… ZDHW300… -
AAABAAAABAAAAABBABABBB
5078758080808080808010010095100100100110100120100100120
10121212202532323212161620252020323232323232
Item codeTooldia.Dc(mm)
Underneck
lengthL1
(mm)
InsertInterferenceangle
θn
Underneck
lengthL1
(mm)
Interferenceangle
θn
Underneck
lengthL1
(mm)
Interferenceangle
θnInsert
Underneck
lengthL1
(mm)
Interferenceangle
θnInsert Insert
Bodytype
ShanklengthRs(mm)
Shankdia.DS(mm)
Reg
ular
Type
Und
er n
eck
long
ABPF(Ball) ARPF(Radius)Under neck length and interference angle of each item
GP1LB(Special shape) GP1T(Special shape)
s
φD
c
φD
s
θn
L1 R s
φD
c
φD
s
L1L1
R
θn
L1 L1 L1
ABPFA type B type ARPF GP1LB GP1T
ABPFM10ABPFM12ABPFM16ABPFM20ABPFM25ABPFM30ABPFM32
10121620253032
26.326.632.638.638.343.243.2
---
383843-
-30.536434450.2 -
26263238384343
ZDFG100…/ZPFG100… ZDFG120…/ZPFG120… ZDFG160…/ZPFG160… ZDFG200…/ZPFG200… ZDFG250…/ZPFG250… ZDFG300…/ZPFG300… ZDFG320…/ZPFG320…
ZCFG100… ZCFG120… ZCFG160… ZCFG200… ZCFG250… ZCFG300… ZCFG320…
---
ZPHW200-LB20ZPHW250-LB25ZPHW300-LB30
-
- ZDHW120-T43-R1.2-30 ZDHW160-T43-R1.5-40 ZDHW200-T43-R2-50 ZDHW250-T43-R2.5-62.5 ZDHW300-T43-R3-75 -
9.89.8
12.817.820.828.828.8
14.514.51719222323
M6M6M8M10M12M16M16
Item codeTooldia.Dc(mm)
Lf
(mm)Insert
Lf
(mm)
Lf
(mm)Insert
Lf
(mm)Insert Insert
φDb ConnectionpartL2
(mm)
MABPF(Ball) ARPF(Radius)Under neck length of each item
GP1LB(Special shape) GP1T(Special shape)
Lf Lf Lf Lf
ABPF ARPF GP1LB GP1T
φD
c
φD
b
L f
L2
M
L1 L1 L1 L1
ABPF ARPF GP1LB GP1T
φD
c
M
MT shank
L1 sR
ABPF06S06WABPF06S06WL65ABPF08S08WABPF08S08WLABPF08S08WL95ABPF08S08WLT75ABPF10S10WABPF10S10WLABPF10S10WL95ABPF10S10WL140ABPF10S12WLT75ABPF12S12WABPF12S12WLABPF12S12WL100ABPF12S12WL120ABPF12S12WL150ABPF12S16WLT85ABPF16S16W60ABPF16S16WL80ABPF16S16WL100ABPF16S16WEABPF16S16WE150ABPF16S20WLT100ABPF20S20W80ABPF20S20WL100ABPF20S20WL120ABPF20S20WEABPF20S20WE220ABPF20S25WLT115ABPF25S25W100ABPF25S25WL120ABPF25S25WL150ABPF25S25WEABPF25S32WLT135ABPF30S32W100ABPF30S32W120ABPF30S32WL150ABPF30S32WEABPF30S32WLT160ABPF32S32W120ABPF32S32WL150ABPF32S32WE220
668888
101010101012121212121216161616161620202020202025252525253030303030323232
2565
30.265.295.275.235.375.395.3
140.375.345.685.6
100.6120.6150.685.660.680.6
100.6120.6150.6100.680.6
100.6120.6150.6220.6115.6100.3120.3150.3190.3135.3100.2120.2150.2230.2160.2120.2150.2220.2
-----------------------80
100120150220115100120150190135100120150230160
---
- - - - - - - - - - - 49.5 89.5 104.5 124.5 154.5 89.5 64 84 104 124 154 104 85 105 125 155 225 120 106 126 156 196 141 107.2 127.2 157.2 237.2 167.2 - - -
----------------
1.5°-----
1.3°-----
1.4°----
1.7°0.7°0.6°0.4°0.3°0.4°
---
----------------------------
1.4°----
1.7°0.7°0.6°0.4°0.3°0.4°
---
256530659575357595
140754585
100120150856080
10012015010080
100120150220115100120150190135100120150230160120150220
-----
1.7°----
0.9°-----
1.5°-----
1.3°-----
1.4°----
1.7°0.7°0.6°0.4°0.3°0.4°
---
-----
1.6°----
0.8°-----
1.5°-----
1.2°-----
1.4°----
1.6°0.7°0.6°0.4°0.3°0.4°
---
ZDFG06…/ZPFG06… ZDFG06…/ZPFG06… ZDFG080…/ZPFG080… ZDFG080…/ZPFG080… ZDFG080…/ZPFG080… ZDFG080…/ZPFG080… ZDFG100…/ZPFG100… ZDFG100…/ZPFG100… ZDFG100…/ZPFG100… ZDFG100…/ZPFG100… ZDFG100…/ZPFG100… ZDFG120…/ZPFG120… ZDFG120…/ZPFG120… ZDFG120…/ZPFG120… ZDFG120…/ZPFG120… ZDFG120…/ZPFG120… ZDFG120…/ZPFG120… ZDFG160…/ZPFG160… ZDFG160…/ZPFG160… ZDFG160…/ZPFG160… ZDFG160…/ZPFG160… ZDFG160…/ZPFG160… ZDFG160…/ZPFG160… ZDFG200…/ZPFG200… ZDFG200…/ZPFG200… ZDFG200…/ZPFG200… ZDFG200…/ZPFG200… ZDFG200…/ZPFG200… ZDFG200…/ZPFG200… ZDFG250…/ZPFG250… ZDFG250…/ZPFG250… ZDFG250…/ZPFG250… ZDFG250…/ZPFG250… ZDFG250…/ZPFG250… ZDFG300…/ZPFG300… ZDFG300…/ZPFG300… ZDFG300…/ZPFG300… ZDFG300…/ZPFG300… ZDFG300…/ZPFG300… ZDFG320…/ZPFG320… ZDFG320…/ZPFG320… ZDFG320…/ZPFG320…
ZCFG06… ZCFG06… ZCFG080… ZCFG080… ZCFG080… ZCFG080… ZCFG100… ZCFG100… ZCFG100… ZCFG100… ZCFG100… ZCFG120… ZCFG120… ZCFG120… ZCFG120… ZCFG120… ZCFG120… ZCFG160… ZCFG160… ZCFG160… ZCFG160… ZCFG160… ZCFG160… ZCFG200… ZCFG200… ZCFG200… ZCFG200… ZCFG200… ZCFG200… ZCFG250… ZCFG250… ZCFG250… ZCFG250… ZCFG250… ZCFG300… ZCFG300… ZCFG300… ZCFG300… ZCFG300… ZCFG320… ZCFG320… ZCFG320…
-----------------------
ZPHW200…ZPHW200…ZPHW200…ZPHW200…ZPHW200…ZPHW200…ZPHW250…ZPHW250…ZPHW250…ZPHW250…ZPHW250…ZPHW300…ZPHW300…ZPHW300…ZPHW300…ZPHW300…
---
-----------
ZDHW120…ZDHW120…ZDHW120…ZDHW120…ZDHW120…ZDHW120…ZDHW160…ZDHW160…ZDHW160…ZDHW160…ZDHW160…ZDHW160…ZDHW200…ZDHW200…ZDHW200…ZDHW200…ZDHW200…ZDHW200…ZDHW250…ZDHW250…ZDHW250…ZDHW250…ZDHW250…ZDHW300…ZDHW300…ZDHW300…ZDHW300…ZDHW300…
---
BBBBBABBBBABBBBBABBBBBABBBBBABBBBABBBBABBB
65557065656565656580656565
1008070657080
10080706580
1201001008080
1201001001108080
1001001208080
10080
66888
12101010101212121212121616161616162020202020202525252525323232323232323232
Item codeTooldia.Dc(mm)
Underneck
lengthL1
(mm)
InsertInterferenceangle
θn
Underneck
lengthL1
(mm)
Interferenceangle
θn
Underneck
lengthL1
(mm)
干渉角θn
Interferenceangle
InsertUnderneck
lengthL1
(mm)
Interferenceangle
θnInsert Insert
Bodytype
ShanklengthRs(mm)
Shankdia.DS(mm)
Under neck length and interference angle of each item
s
φD
c
φD
s
θn
L1 R s
φD
c
φD
s
L1L1
R
θn
L1 L1 L1
ABPFA type B type ARPF GP1LB GP1T
ABPF(Ball) ARPF(Radius) GP1LB(Special shape)GP1T(Special shape)
ABPF20MT2ABPF25MT3ABPF30MT4ABPF32MT4
20253032
65.685.3
115.2115.2
6585
115-
70 91 122.2 -
6585
115115
ZDFG200…/ZPFG200…ZDFG250…/ZPFG250…ZDFG300…/ZPFG300…ZDFG320…/ZPFG320…
ZCFG200… ZCFG250… ZCFG300… ZCFG320…
ZPHW200-LB20ZPHW250-LB25ZPHW300-LB30
-
ZDHW200-T43-R2-50ZDHW250-T43-R2.5-62.5ZDHW300-T43-R3-75 -
MT2MT3MT4MT4
64 81 102.5 102.5
M10M12M16M16
Item codeTooldia.Dc(mm)
Underneck
lengthL1
(mm)
InsertUnderneck
lengthL1
(mm)
Underneck
lengthL1
(mm)
Insert Underneck
lengthL1
(mm)
Insert Insert
MTNo.
ShanklengthRs(mm)
M
Under neck length of each itemABPF(Ball) ARPF(Radius) GP1LB(Special shape) GP1T(Special shape)
03 0402
Head figure of each insert
Head figure of each insert
Head figure of each insert
Head figure of each insert
More option, more possibility More option, more possibility The insert of ARPF, GP1LB and GP1T is able to set onto ABPF type cutter body.
GP1LBGP1LB
· Joint usage4 different types of insert fits into one cutter body.
· More optionSteel & carbide shank type would be additional choice for the item which had limited in modular type.
· Cost reductionCost of the cutter body will be reduced by sharing.
· High rigid clamping systemOriginal V-shaped clamping system & special screw(patented) brings out stable performance in each different insert geometry.
Special shapedtool.Big-R shaped lens & barrel edges shorten the finishing time drastically.
GP1TGP1TSpecial shapedtool.Maximize the advantage of 5-axis milling, one tool fits in two different processes.
ABPFABPFHigh precision
ball tool.High helix geometry provides lower cutting force and longer tool life in various work materials.
ARPFARPFHigh precision
radius tool.Original edge geometries cover up from semi-finishing to precise finishing process.
Modular type
Steel shank (MT shank)
Carbide shankSteel shank
ABPF06S10 ABPF08S12 ABPF10S12 ABPF12S12 ABPF16S20 ABPF20S25 ABPF25S32 ABPF30S32 ABPF32S32 ABPF08S12L ABPF10S16L ABPF12S16L ABPF16S20L ABPF20S25L ABPF20S20L120 ABPF20S20L150 ABPF25S32L ABPF25S32L150 ABPF30S32L ABPF30S32L150 ABPF30S32L200 ABPF32S32L
68
101216202530328
101216202020252530303032
3022.225.330.650.660.670.380.290.250.250.360.665.680.6
120.6150.690.3
150.3100.2150.2200.2100.2
- - - - - 607080- - - - - 80
12015090
150100150200
-
- - - 34.5 54 65 76 87.2 - - - 64.5 69 85 125 155 96 156 107.2 157.2 207.2 -
----
2.7°2.9°3.5°0.9°
---
2.1°2.0°2.1°
--
2.6°1.5°0.7°0.5°0.3°
-
-----
2.9°3.5°1.2°
-----
2.1°--
2.6°1.5°0.7°0.5°0.3°
-
3022253050607080905050606580
12015090
150100150200100
4.3°6.4°2.9°
-2.8°2.9°3.5°1.2°
-2.5°3.9°2.2°2.1°2.1°
--
2.6°1.5°0.7°0.5°0.3°
-
4.1°5.8°2.6°
-2.6°2.7°3.3°0.9°
-2.4°3.7°2.0°1.9°2.0°
--
2.5°1.5°0.7°0.5°0.3°
-
ZDFG06…/ZPFG06… ZDFG080…/ZPFG080…ZDFG100…/ZPFG100…ZDFG120…/ZPFG120…ZDFG160…/ZPFG160…ZDFG200…/ZPFG200…ZDFG250…/ZPFG250…ZDFG300…/ZPFG300…ZDFG320…/ZPFG320…ZDFG080…/ZPFG080…ZDFG100…/ZPFG100…ZDFG120…/ZPFG120…ZDFG160…/ZPFG160…ZDFG200…/ZPFG200…ZDFG200…/ZPFG200…ZDFG200…/ZPFG200…ZDFG250…/ZPFG250…ZDFG250…/ZPFG250…ZDFG300…/ZPFG300…ZDFG300…/ZPFG300…ZDFG300…/ZPFG300…ZDFG320…/ZPFG320…
ZCFG06… ZCFG080… ZCFG100… ZCFG120… ZCFG160… ZCFG200… ZCFG250… ZCFG300… ZCFG320… ZCFG080… ZCFG100… ZCFG120… ZCFG160… ZCFG200… ZCFG200… ZCFG200… ZCFG250… ZCFG250… ZCFG300… ZCFG300… ZCFG300… ZCFG320…
-----
ZPHW200…ZPHW250…ZPHW300…
-----
ZPHW200…ZPHW200…ZPHW200…ZPHW250…ZPHW250…ZPHW300…ZPHW300…ZPHW300…
-
- - - ZDHW120… ZDHW160… ZDHW200… ZDHW250… ZDHW300… - - - ZDHW120… ZDHW160… ZDHW200… ZDHW200… ZDHW200… ZDHW250… ZDHW250… ZDHW300… ZDHW300… ZDHW300… -
AAABAAAABAAAAABBABABBB
5078758080808080808010010095100100100110100120100100120
10121212202532323212161620252020323232323232
Item codeTooldia.Dc(mm)
Underneck
lengthL1
(mm)
InsertInterferenceangle
θn
Underneck
lengthL1
(mm)
Interferenceangle
θn
Underneck
lengthL1
(mm)
Interferenceangle
θnInsert
Underneck
lengthL1
(mm)
Interferenceangle
θnInsert Insert
Bodytype
ShanklengthRs(mm)
Shankdia.DS(mm)
Reg
ular
Type
Und
er n
eck
long
ABPF(Ball) ARPF(Radius)Under neck length and interference angle of each item
GP1LB(Special shape) GP1T(Special shape)
s
φD
c
φD
s
θn
L1 R s
φD
c
φD
s
L1L1
R
θn
L1 L1 L1
ABPFA type B type ARPF GP1LB GP1T
ABPFM10ABPFM12ABPFM16ABPFM20ABPFM25ABPFM30ABPFM32
10121620253032
26.326.632.638.638.343.243.2
---
383843-
-30.536434450.2 -
26263238384343
ZDFG100…/ZPFG100… ZDFG120…/ZPFG120… ZDFG160…/ZPFG160… ZDFG200…/ZPFG200… ZDFG250…/ZPFG250… ZDFG300…/ZPFG300… ZDFG320…/ZPFG320…
ZCFG100… ZCFG120… ZCFG160… ZCFG200… ZCFG250… ZCFG300… ZCFG320…
---
ZPHW200-LB20ZPHW250-LB25ZPHW300-LB30
-
- ZDHW120-T43-R1.2-30 ZDHW160-T43-R1.5-40 ZDHW200-T43-R2-50 ZDHW250-T43-R2.5-62.5 ZDHW300-T43-R3-75 -
9.89.8
12.817.820.828.828.8
14.514.51719222323
M6M6M8M10M12M16M16
Item codeTooldia.Dc(mm)
Lf
(mm)Insert
Lf
(mm)
Lf
(mm)Insert
Lf
(mm)Insert Insert
φDb ConnectionpartL2
(mm)
MABPF(Ball) ARPF(Radius)Under neck length of each item
GP1LB(Special shape) GP1T(Special shape)
Lf Lf Lf Lf
ABPF ARPF GP1LB GP1T
φD
c
φD
b
L f
L2
M
L1 L1 L1 L1
ABPF ARPF GP1LB GP1T
φD
c
M
MT shank
L1 sR
ABPF06S06WABPF06S06WL65ABPF08S08WABPF08S08WLABPF08S08WL95ABPF08S08WLT75ABPF10S10WABPF10S10WLABPF10S10WL95ABPF10S10WL140ABPF10S12WLT75ABPF12S12WABPF12S12WLABPF12S12WL100ABPF12S12WL120ABPF12S12WL150ABPF12S16WLT85ABPF16S16W60ABPF16S16WL80ABPF16S16WL100ABPF16S16WEABPF16S16WE150ABPF16S20WLT100ABPF20S20W80ABPF20S20WL100ABPF20S20WL120ABPF20S20WEABPF20S20WE220ABPF20S25WLT115ABPF25S25W100ABPF25S25WL120ABPF25S25WL150ABPF25S25WEABPF25S32WLT135ABPF30S32W100ABPF30S32W120ABPF30S32WL150ABPF30S32WEABPF30S32WLT160ABPF32S32W120ABPF32S32WL150ABPF32S32WE220
668888
101010101012121212121216161616161620202020202025252525253030303030323232
2565
30.265.295.275.235.375.395.3
140.375.345.685.6
100.6120.6150.685.660.680.6
100.6120.6150.6100.680.6
100.6120.6150.6220.6115.6100.3120.3150.3190.3135.3100.2120.2150.2230.2160.2120.2150.2220.2
-----------------------80
100120150220115100120150190135100120150230160
---
- - - - - - - - - - - 49.5 89.5 104.5 124.5 154.5 89.5 64 84 104 124 154 104 85 105 125 155 225 120 106 126 156 196 141 107.2 127.2 157.2 237.2 167.2 - - -
----------------
1.5°-----
1.3°-----
1.4°----
1.7°0.7°0.6°0.4°0.3°0.4°
---
----------------------------
1.4°----
1.7°0.7°0.6°0.4°0.3°0.4°
---
256530659575357595
140754585
100120150856080
10012015010080
100120150220115100120150190135100120150230160120150220
-----
1.7°----
0.9°-----
1.5°-----
1.3°-----
1.4°----
1.7°0.7°0.6°0.4°0.3°0.4°
---
-----
1.6°----
0.8°-----
1.5°-----
1.2°-----
1.4°----
1.6°0.7°0.6°0.4°0.3°0.4°
---
ZDFG06…/ZPFG06… ZDFG06…/ZPFG06… ZDFG080…/ZPFG080… ZDFG080…/ZPFG080… ZDFG080…/ZPFG080… ZDFG080…/ZPFG080… ZDFG100…/ZPFG100… ZDFG100…/ZPFG100… ZDFG100…/ZPFG100… ZDFG100…/ZPFG100… ZDFG100…/ZPFG100… ZDFG120…/ZPFG120… ZDFG120…/ZPFG120… ZDFG120…/ZPFG120… ZDFG120…/ZPFG120… ZDFG120…/ZPFG120… ZDFG120…/ZPFG120… ZDFG160…/ZPFG160… ZDFG160…/ZPFG160… ZDFG160…/ZPFG160… ZDFG160…/ZPFG160… ZDFG160…/ZPFG160… ZDFG160…/ZPFG160… ZDFG200…/ZPFG200… ZDFG200…/ZPFG200… ZDFG200…/ZPFG200… ZDFG200…/ZPFG200… ZDFG200…/ZPFG200… ZDFG200…/ZPFG200… ZDFG250…/ZPFG250… ZDFG250…/ZPFG250… ZDFG250…/ZPFG250… ZDFG250…/ZPFG250… ZDFG250…/ZPFG250… ZDFG300…/ZPFG300… ZDFG300…/ZPFG300… ZDFG300…/ZPFG300… ZDFG300…/ZPFG300… ZDFG300…/ZPFG300… ZDFG320…/ZPFG320… ZDFG320…/ZPFG320… ZDFG320…/ZPFG320…
ZCFG06… ZCFG06… ZCFG080… ZCFG080… ZCFG080… ZCFG080… ZCFG100… ZCFG100… ZCFG100… ZCFG100… ZCFG100… ZCFG120… ZCFG120… ZCFG120… ZCFG120… ZCFG120… ZCFG120… ZCFG160… ZCFG160… ZCFG160… ZCFG160… ZCFG160… ZCFG160… ZCFG200… ZCFG200… ZCFG200… ZCFG200… ZCFG200… ZCFG200… ZCFG250… ZCFG250… ZCFG250… ZCFG250… ZCFG250… ZCFG300… ZCFG300… ZCFG300… ZCFG300… ZCFG300… ZCFG320… ZCFG320… ZCFG320…
-----------------------
ZPHW200…ZPHW200…ZPHW200…ZPHW200…ZPHW200…ZPHW200…ZPHW250…ZPHW250…ZPHW250…ZPHW250…ZPHW250…ZPHW300…ZPHW300…ZPHW300…ZPHW300…ZPHW300…
---
-----------
ZDHW120…ZDHW120…ZDHW120…ZDHW120…ZDHW120…ZDHW120…ZDHW160…ZDHW160…ZDHW160…ZDHW160…ZDHW160…ZDHW160…ZDHW200…ZDHW200…ZDHW200…ZDHW200…ZDHW200…ZDHW200…ZDHW250…ZDHW250…ZDHW250…ZDHW250…ZDHW250…ZDHW300…ZDHW300…ZDHW300…ZDHW300…ZDHW300…
---
BBBBBABBBBABBBBBABBBBBABBBBBABBBBABBBBABBB
65557065656565656580656565
1008070657080
10080706580
1201001008080
1201001001108080
1001001208080
10080
66888
12101010101212121212121616161616162020202020202525252525323232323232323232
Item codeTooldia.Dc(mm)
Underneck
lengthL1
(mm)
InsertInterferenceangle
θn
Underneck
lengthL1
(mm)
Interferenceangle
θn
Underneck
lengthL1
(mm)
干渉角θn
Interferenceangle
InsertUnderneck
lengthL1
(mm)
Interferenceangle
θnInsert Insert
Bodytype
ShanklengthRs(mm)
Shankdia.DS(mm)
Under neck length and interference angle of each item
s
φD
c
φD
s
θn
L1 R s
φD
c
φD
s
L1L1
R
θn
L1 L1 L1
ABPFA type B type ARPF GP1LB GP1T
ABPF(Ball) ARPF(Radius) GP1LB(Special shape)GP1T(Special shape)
ABPF20MT2ABPF25MT3ABPF30MT4ABPF32MT4
20253032
65.685.3
115.2115.2
6585
115-
70 91 122.2 -
6585
115115
ZDFG200…/ZPFG200…ZDFG250…/ZPFG250…ZDFG300…/ZPFG300…ZDFG320…/ZPFG320…
ZCFG200… ZCFG250… ZCFG300… ZCFG320…
ZPHW200-LB20ZPHW250-LB25ZPHW300-LB30
-
ZDHW200-T43-R2-50ZDHW250-T43-R2.5-62.5ZDHW300-T43-R3-75 -
MT2MT3MT4MT4
64 81 102.5 102.5
M10M12M16M16
Item codeTooldia.Dc(mm)
Underneck
lengthL1
(mm)
InsertUnderneck
lengthL1
(mm)
Underneck
lengthL1
(mm)
Insert Underneck
lengthL1
(mm)
Insert Insert
MTNo.
ShanklengthRs(mm)
M
Under neck length of each itemABPF(Ball) ARPF(Radius) GP1LB(Special shape) GP1T(Special shape)
03 0402
Head figure of each insert
Head figure of each insert
Head figure of each insert
Head figure of each insert
New Produc t News No.1708E-1 2019-4
Clamp screw Parts Screw driver / Wrench Screw anti-seizure agent
581-140581-141581-142581-143
581-144
581-145
581-146
581-147
581-147
0.51.12.24.9
4.9
6.9
9.8
9.8
9.8
104-T6104-T8104-T10
105-T20
101-T25S
105-T30A
AAA
B
B
B
P-37
Cutter Body
Shape
A B
Fasteningtorque(N・m)
ABPF06S (W/WL )ABPF08S (L/W/WL/WL /WLT )ABPF10S (L/W/WL/WL /WLT )ABPFM10ABPF12S (L/W/WL/WL /WLT )ABPFM12ABPF16S (L/W /WL /WE/WE /WLT )ABPFU16W220 ABPFM16ABPF20S (L/W /WL /WE/WE /WLT )ABPF20MT2 ABPFU20W270 ABPFM20ABPF25S (L/W /WL /WE/WE /WLT )ABPF25MT3 ABPFU25W300 ABPFM25ABPF30S (L/W /WL /WE/WE /WLT )ABPF30MT4 ABPFU30W300 ABPFM30ABPF32S (L/W /WL /WE )ABPF32MT4 ABPFM32
Shape
2019-4(K)2017-4:FP
Clean the insert seat:Using air-blow or alike, clean the seat.1
Put in the insert with its top positioned to the screw-tightening side of the tool body.2
This is the end of insert set-up.4
Clamp screw (high precision screw)
Tool body
Top mark
Tighten the clamp screw with the special wrench.Please do not press down the insert during this tightening process.
3
In order to satisfy runout of 0.02mm or less, follow the procedure at left.
Note Cutting conditions and suggested retail price are referred in product catalogue or product newsABPF:No.0902 ARPF:No.0901 GP1LB:No.1711 GP1T:No.1711
L1 L1 L1 L1
ABPF ARPF GP1LB GP1T
Head figure of each insert
ABPFU16W220ABPFU20W270ABPFU25W300ABPFU30W300
16202530
39.651.661.373.2
-516173
43566770.2
39516173
ZDFG160…/ZPFG160… ZDFG200…/ZPFG200… ZDFG250…/ZPFG250… ZDFG300…/ZPFG300…
ZCFG160… ZCFG200… ZCFG250… ZCFG300…
-ZPHW200-LB20ZPHW250-LB25ZPHW300-LB30
ZDHW160-T43-R1.5-40 ZDHW200-T43-R2-50 ZDHW250-T43-R2.5-62.5 ZDHW300-T43-R3-75
15192429
181219239227
15182328
Item codeTooldia.Dc(mm)
Underneck
lengthL1
(mm)
InsertUnderneck
lengthL1
(mm)
Underneck
lengthL1
(mm)
InsertUnderneck
lengthL1
(mm)
Insert Insert
φD2
(mm)
ShanklengthRs(mm)
Shankdia.DS(mm)
Under neck length of each item
s
φD
c
L1 R
ABPF(Ball) ARPF(Radius) GP1LB(Special shape) GP1T(Special shape)
3
φD
s
φD
2
Carbide shank (Under neck type)
Parts
Set-up Procedures of Inserts
The diagrams and table data are examples of test results, and are not guaranteed values.“ ” is registered trademarks of Mitsubishi Hitachi Tool Engineering, Ltd. in Japan.
Specifications for the products listed in this catalog are subject to change without notice due to replacement or modification. Printed in JAPAN
Printed using vegetable oil ink.
Official Web Site
Database for selection Cutting Tool Products 【TOOL SEARCH】
http://www.mmc-hitachitool.co.jp/e/Head OfficeHulic Ryogoku Bldg. 8F, 4-31-11, Ryogoku, Sumida-ku, Tokyo, 130-0026 JapanInternational Sales Dept. : TEL +81-3-6890-5103 FAX +81-3-6890-5128
MMC Hitachi Tool Engineering Europe GmbHItterpark 12, 40724 Hilden,Germany. Tel +49-(0)2103-24820 Fax +49-(0)2103-248230
MITSUBISHI MATERIALS U.S.A. CORPORATIONDETROIT OFFICE Customer service41700 Gardenbrook Road, Suite 120, Novi, MI 48375-1320 U.S.A.Tel +1(248) 308-2620 Fax +1(248) 308-2627CHICAGO OFFICE1314B North Plum Grove Road, Schaumburg, IL 60173 U.S.A. Tel +1(847) 252-6371 Fax +1(248) 308-2627
MMC METAL DE MEXICO, S.A. DE C.V.IAv. La Cañada No.16, Parque Industrial Bernardo Quintana, El Marques,Querétaro, CP 76246, MéxicoTel +52-442-1926800
MMC Hitachi Tool Engineering(Shanghai),Ltd.Room 2604-2605, Metro Plaza, 555 Loushanguan Road, Changning Disctrict, Shanghai, 200051, CHINA Tel +86-(0)21-3366-3058 Fax +86-(0)21-3366-3050
MMC Hardmetal(Thailand)Co.,Ltd. HT-DivisionCTI Tower 24 Floor, 191/32 Ratchadapisek Road, Klongtoey, Klongtoey, Bangkok 10110, Thailand Tel: +66-(0)2-661-8170 Fax: +66-(0)2-661-8175
Hitachi Metals (India) Pvt. Ltd.Plot No 94 & 95,Sector 8, IMT Manesar ,Gurgaon-122050 , Haryana, India Tel +91-124-4812315 Fax +91-124-2290015
Search Web
DISTRIBUTED BY:
Europe China
America
Mexico
Thailand
India
Attentions on Safety
1. Attentions regarding handling(1)When removing the tool from the case(package), be careful not to drop it on your foot or drop it onto the tips of your bare fingers.(2)When actually setting the inserts, be careful not to touch the cutting flute directly with your bare hands.
2. Attentions regarding mounting(1)When preparing for use, be sure that the inserts are firmly mounted in place and that they are firmly mounted on the arbor, etc.(2)If abnormal chattering occurs during use, stop the machine immediately and remove the cause of the chattering.
3. Attentions during use(1)Before use, confirm the dimensions and direction of rotation of the tool and milling work material.(2)The numerical values in the standard cutting conditions table should be used as criteria when starting new work. The cutting conditions should be adjusted as
appropriate when the cutting depth is large, the rigidity of the machine being used is low, or according to the conditions of the work material.(3)The inserts are made of a hard material. During use, they may break and fly off. In addition, cutting chips may also fly off. Since there is a danger of injury to
workers, fire, or eye damage from such flying pieces, a safety cover should be installed and safety equipment such as safety glasses should be worn to create a safe environment for work.・Do not use where there is a risk of fire or explosion.・Do not use non-water-soluble cutting oils. Such oils may result in fire.
(4)Do not use the tool for any purpose other than that for which it is intended, and do not modify it.
Multipurpose usage list of ABPF type cutter body
05
New Produc t News No.1708E-1 2019-4
Clamp screw Parts Screw driver / Wrench Screw anti-seizure agent
581-140581-141581-142581-143
581-144
581-145
581-146
581-147
581-147
0.51.12.24.9
4.9
6.9
9.8
9.8
9.8
104-T6104-T8104-T10
105-T20
101-T25S
105-T30A
AAA
B
B
B
P-37
Cutter Body
Shape
A B
Fasteningtorque(N・m)
ABPF06S (W/WL )ABPF08S (L/W/WL/WL /WLT )ABPF10S (L/W/WL/WL /WLT )ABPFM10ABPF12S (L/W/WL/WL /WLT )ABPFM12ABPF16S (L/W /WL /WE/WE /WLT )ABPFU16W220 ABPFM16ABPF20S (L/W /WL /WE/WE /WLT )ABPF20MT2 ABPFU20W270 ABPFM20ABPF25S (L/W /WL /WE/WE /WLT )ABPF25MT3 ABPFU25W300 ABPFM25ABPF30S (L/W /WL /WE/WE /WLT )ABPF30MT4 ABPFU30W300 ABPFM30ABPF32S (L/W /WL /WE )ABPF32MT4 ABPFM32
Shape
2019-4(K)2017-4:FP
Clean the insert seat:Using air-blow or alike, clean the seat.1
Put in the insert with its top positioned to the screw-tightening side of the tool body.2
This is the end of insert set-up.4
Clamp screw (high precision screw)
Tool body
Top mark
Tighten the clamp screw with the special wrench.Please do not press down the insert during this tightening process.
3
In order to satisfy runout of 0.02mm or less, follow the procedure at left.
Note Cutting conditions and suggested retail price are referred in product catalogue or product newsABPF:No.0902 ARPF:No.0901 GP1LB:No.1711 GP1T:No.1711
L1 L1 L1 L1
ABPF ARPF GP1LB GP1T
Head figure of each insert
ABPFU16W220ABPFU20W270ABPFU25W300ABPFU30W300
16202530
39.651.661.373.2
-516173
43566770.2
39516173
ZDFG160…/ZPFG160… ZDFG200…/ZPFG200… ZDFG250…/ZPFG250… ZDFG300…/ZPFG300…
ZCFG160… ZCFG200… ZCFG250… ZCFG300…
-ZPHW200-LB20ZPHW250-LB25ZPHW300-LB30
ZDHW160-T43-R1.5-40 ZDHW200-T43-R2-50 ZDHW250-T43-R2.5-62.5 ZDHW300-T43-R3-75
15192429
181219239227
15182328
Item codeTooldia.Dc(mm)
Underneck
lengthL1
(mm)
InsertUnderneck
lengthL1
(mm)
Underneck
lengthL1
(mm)
InsertUnderneck
lengthL1
(mm)
Insert Insert
φD2
(mm)
ShanklengthRs(mm)
Shankdia.DS(mm)
Under neck length of each item
s
φD
c
L1 R
ABPF(Ball) ARPF(Radius) GP1LB(Special shape) GP1T(Special shape)
3
φD
s
φD
2
Carbide shank (Under neck type)
Parts
Set-up Procedures of Inserts
The diagrams and table data are examples of test results, and are not guaranteed values.“ ” is registered trademarks of Mitsubishi Hitachi Tool Engineering, Ltd. in Japan.
Specifications for the products listed in this catalog are subject to change without notice due to replacement or modification. Printed in JAPAN
Printed using vegetable oil ink.
Official Web Site
Database for selection Cutting Tool Products 【TOOL SEARCH】
http://www.mmc-hitachitool.co.jp/e/Head OfficeHulic Ryogoku Bldg. 8F, 4-31-11, Ryogoku, Sumida-ku, Tokyo, 130-0026 JapanInternational Sales Dept. : TEL +81-3-6890-5103 FAX +81-3-6890-5128
MMC Hitachi Tool Engineering Europe GmbHItterpark 12, 40724 Hilden,Germany. Tel +49-(0)2103-24820 Fax +49-(0)2103-248230
MITSUBISHI MATERIALS U.S.A. CORPORATIONDETROIT OFFICE Customer service41700 Gardenbrook Road, Suite 120, Novi, MI 48375-1320 U.S.A.Tel +1(248) 308-2620 Fax +1(248) 308-2627CHICAGO OFFICE1314B North Plum Grove Road, Schaumburg, IL 60173 U.S.A. Tel +1(847) 252-6371 Fax +1(248) 308-2627
MMC METAL DE MEXICO, S.A. DE C.V.IAv. La Cañada No.16, Parque Industrial Bernardo Quintana, El Marques,Querétaro, CP 76246, MéxicoTel +52-442-1926800
MMC Hitachi Tool Engineering(Shanghai),Ltd.Room 2604-2605, Metro Plaza, 555 Loushanguan Road, Changning Disctrict, Shanghai, 200051, CHINA Tel +86-(0)21-3366-3058 Fax +86-(0)21-3366-3050
MMC Hardmetal(Thailand)Co.,Ltd. HT-DivisionCTI Tower 24 Floor, 191/32 Ratchadapisek Road, Klongtoey, Klongtoey, Bangkok 10110, Thailand Tel: +66-(0)2-661-8170 Fax: +66-(0)2-661-8175
Hitachi Metals (India) Pvt. Ltd.Plot No 94 & 95,Sector 8, IMT Manesar ,Gurgaon-122050 , Haryana, India Tel +91-124-4812315 Fax +91-124-2290015
Search Web
DISTRIBUTED BY:
Europe China
America
Mexico
Thailand
India
Attentions on Safety
1. Attentions regarding handling(1)When removing the tool from the case(package), be careful not to drop it on your foot or drop it onto the tips of your bare fingers.(2)When actually setting the inserts, be careful not to touch the cutting flute directly with your bare hands.
2. Attentions regarding mounting(1)When preparing for use, be sure that the inserts are firmly mounted in place and that they are firmly mounted on the arbor, etc.(2)If abnormal chattering occurs during use, stop the machine immediately and remove the cause of the chattering.
3. Attentions during use(1)Before use, confirm the dimensions and direction of rotation of the tool and milling work material.(2)The numerical values in the standard cutting conditions table should be used as criteria when starting new work. The cutting conditions should be adjusted as
appropriate when the cutting depth is large, the rigidity of the machine being used is low, or according to the conditions of the work material.(3)The inserts are made of a hard material. During use, they may break and fly off. In addition, cutting chips may also fly off. Since there is a danger of injury to
workers, fire, or eye damage from such flying pieces, a safety cover should be installed and safety equipment such as safety glasses should be worn to create a safe environment for work.・Do not use where there is a risk of fire or explosion.・Do not use non-water-soluble cutting oils. Such oils may result in fire.
(4)Do not use the tool for any purpose other than that for which it is intended, and do not modify it.
Multipurpose usage list of ABPF type cutter body
05