multipurpose hall building a - procurement notices
TRANSCRIPT
AMultipurpose Hall Building
Unit Rate Total
$ Amount $
(A) M.P.H Building
Construction Works :
Bill No. (1) Excavation & Earth Works
1 Demolish the existing external steps close to the existing ramp & remove safely all
the debris from the site to approved places. The price shall include the repair and
reinstatement of the existing situation to its original condition as per drawings and
the engineer's instructions.
L.S 1
2 Excavation for foundations from natural ground level up to the required designed
level. The works including:
‐ The compaction of the soil surfaces to get (98% MDD).
‐ The excavated material should be removed out from the site to the approved
places.
‐ All to be executed as per specifications, drawings and the engineer’s instructions.
M3 600
3 Supply, fill by using approved material (clean sand) around the foundations &
inside the building up to the required levels, which shall be spread in layers not
exceeding 25cm each one & compacted (98%) to reach up the required levels
(under floor slab), according to the specifications & the engineer's instructionsM3 1100
Total of Bill No. (1)
Item
Description
Unit Qty.
Contractor Signature Stamp
AMultipurpose Hall Building
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
Bill No. (2) Concrete & Block Works
A‐ Concrete Works
Rates of Concrete Works shall include: ‐
‐ All form works and shuttering in any form, shape and size. Making chamfered and
curved edges, allowing for and making grooves and sleeves and the like; removal of
forms and cleaning of all exposed tie wires and rods; making good the harmed
surfaces and edges and all surface finishing.
‐ Supplying, Casting, vibrating and curing as per specifications.
‐ Approved additives and admixtures.
‐ Incurred costs on Concrete Mix Designs, Sample taking, testing and providing test
results certificates, storing and saving of samples.
‐ Supplying reinforcement of any grade, size and length as detailed in the
drawings, storing on site including cutting, bending and fixing in position and
providing all tying wires, spacers, shop drawings, testing and bar bending schedules
‐ Painting of exposed surfaces of underground reinforced concrete elements with
primer and two coats of hot bituminous paint (75/25), the strokes of each layer to
be opposite to each other.
‐ Underground concrete elements prices are including expansion joints, flexcell
sheets 18mm thick & mastic.
‐ Steel bars used for alignment and fixing of reinforcement works, and extra steel
added to assure proper detailing and safety.
‐Supply & spread polythene sheets gauge 500 under the foundations & ground
slabs.
‐ Measurement of Concrete elements shall be the net dimensions as detailed in the
drawings. All recesses openings and voids shall be deducted.
‐ Measurement shall be only for the seen surfaces of elements. Overlapping and
measuring items twice under separate headings shall not be allowed.
‐ Columns are to be measured from the top level of the slab to the bottom level of
the beam or dropped beam.
‐ The concrete surface must be finished with mechanical steel trowel machine.
All works must be done as per drawings, specifications & the engineer's
instructions.
2.1 Supply & cast plain concrete B150 under the foundations m3 20
2.2 Supply & cast ready mix concrete B300 for reinforced concrete foundationsm3 200
2.3 Supply & cast ready mix concrete B300 for columns necks as shown on the
drawings, specifications and the engineer's instructions. m3 4
2.4 Supply & cast ready mix concrete B300 for tie ground beams. m3 25
2.5 Supply & cast ready mix concrete B300 for external steps. m3 8
Contractor Signature Stamp
AMultipurpose Hall Building
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
2.6 Supply & cast ready mix concrete B250 for ground slab 10cm thick with steel mesh
T8/20cm each way.m2 300
2.7 Ditto, but with the steps inside the M.P.H. including steel stirrups T8/20cm & T8 for
steps nose (see DWG. S03). m3 80
2.8 Supply & cast ready mix concrete B300 for columns as shown on the drawings,
specifications and the engineer's instructions. m3 60
2.9 Ditto but for concrete walls (see DWG. S02 &S03).m3 50
2.10 Ditto but (200kg/cm2) for stop columns at roof. m3 7
2.11 Supply & cast ready mix concrete B300 for suspended hollow block slabs 25cm
thick, including the hollow cement blocks, reinforced concrete hidden, inverted &
drop beams & all the required materials.
Girders (F) are not included in this item.m2 680
2.12 Ditto, but for suspended hollow block slabs 20cm thick, including the hollow
cement blocks, reinforced concrete hidden, inverted & drop beams & all the
required materials.
m2 165
2.13 Supply & cast ready mix concrete B300 for Girders (F) at the suspended hollow
block slabs 25cm thick, including the steel reinforcement & all the required
materialsm3 100
2.14 Supply & cast ready mix concrete B300 for staircases flights & landings including all
required materials m3 15
2.15 Supply & cast ready mix concrete B250 for doors & windows lintels, sills & canopies
including all the required materials.m3 18
2.16 Ditto, but for parapet walls coping & external concrete elements.m3 5
2.17 Supply & cast 10 cm thick ready mix concrete B300 for staircase concrete parapet
walls (see DWG. S12).m3 3
2.18 Supply & cast ready mix concrete B250 for decorative concrete facade as shown on
the drawings, specifications and the engineer's instructions. m3 3
B‐ Block Works: ‐
The items include supplying hollow cement block from good and approved factory
2.19
Supply & build hollow block walling 35cm thick, consists of external block 20cm,
internal block 10 cm and 5 cm thick Polystyrene, the price includes the supplying of
all the required materials.m2 360
2.20Supply & build hollow block walling 20cm thick including the supplying of all
materials (block size 20 x 20 x 40cm). m2 390
2.21Supply & build hollow block walling 10cm thick including the supplying of all
materials (block size 10 x 20 x 40cm). m2 250
Total of Bill No. (2)
Contractor Signature Stamp
AMultipurpose Hall Building
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
Bill No. (3) Finishing Works
_ The price shall include the supply of all materials, galvanized angles, and
galvanized mesh not less than 50cm width, mixing, scaffolding, curing, site
cleaning, equipment and workmanship required to complete the job according to
the specifications, conditions of contract, drawings & engineer’s approval.
_The rates of the following items shall be completed in accordance with the
drawings; specs, details and as directed by the engineer.
_The contractor must submit the shop drawings to the engineer's approval before
starting the work. _Black basalt chips of size 4mm shall
be used in the precast terrazzo items.
_ Grade (A) local marble (free from cracks, holes & pits, homogeneous in color and
approved by the engineer must be used.
_ All Tiling works must be filled & polished according to the engineer's instructions.
_ All materials used for painting shall be of high quality materials based on the
British standards and must be approved by the engineer, paints and applying
method must be as per the manufacturer’s instructions.
3.1 Supply & execute internal plastering 13mm thick to walls,cielings, soffits & columns
including galvanized metal lath angles for columns, edges & chicken wire at the
intersection of concrete & block works, pipes & cement rendering as per the
engineer's instructions.
M2 1300
3.2 Ditto, but for external plastering 15mm thick to walls and soffits the price including
additional layer of 5mm thick lime free mortar (mix 1: 3) as per specs, drawings
and the engineer’s instructions.M2 150
3.3 Supply and install west bank smooth stone 5.0 cm thick with backing filling 10.0cm(Grade B-200) with steel mesh 6mm dia @ 20cmm as per the engineer's instructions. M2 90
3.4 Ditto but 5.0 cm thick with backing filling 5.0cm.M2 140
3.5 Ditto but Molatash 5.0 cm thick with backing filling 5.0cm.M2 770
Contractor Signature Stamp
AMultipurpose Hall Building
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
3.6 Supply and install terrazzo floor tiles (grade A) size 25x25x2.5cm with marble chips
laid on 2cm mortar bed and 5 cm thick sand bed and terrazzo skirting 30cmx
7cmx1cm including all materials and testing as per specifications, drawings, and the
engineer's instructions.M2 240
3.7 Supply and install local marble (grade A) size 35 cm wide x 3cm thick for windows
sills laid on 2 cm thick mortar bed as per specifications, drawings, and the
engineer's instructions.RM 25
3.8 Ditto but size 36 cm wide x 3cm thick for roof parapet. RM 125
3.9 Ditto but size 76 x66 x 3cm thick for roof stop columnM2 8
3.10 Ditto but threshold size 23 cm wide x 3cm thick for doors.RM 25
3.11 Supply and install Rosabita marble size 19 cm wide x2cm thick for staircase parapet
laid on 2 cm thick mortar bed as per specifications, drawings, and the engineer's
instructions.RM 125
3.12 Supply and lay Rosabita marble stair treads size 36 cm wide x 3cm thick chamfered
once, rebated once and laid on 2cm thick mortar bed and the price includes
Rosabita marble stair risers size 12.0cm or 12.5 high x2cm thick and skirting
7/20cm high x2cm thick as per specs, drawings and the engineer ‘s instructions.RM 165
3.13 Supply and install Rosabita marble (grade A) size 30x60x2cm thick for staircase
landings & stage floor laid on 2 cm thick white cement mortar bed as per specs,
drawings, and the engineer's instructions.M2 50
3.14 Ditto but, Rosabita marble (grade A) size 30x60x2cm thick for entrance walls laid
on 2 cm thick white cement mortar bed as per specs, drawings, and the engineer's
instructions.M2 50
3.15 Supply and install colored none slipping ceramic (grade A) 8mm thick for floor.M2 20
3.16 Supply and install colored glazed wall tiles (grade A) 6mm thick laid on 2cm mortar
(1:3). M2 90
3.17 Supply and install high quality moquette 6 mm thick, 1.8kg/m2 (Super lugo or
equivalent), upper Aluminum angles for upper steps edges 30*30*1.25mm,
stainless steel rod 14mm for lower edge, skirting, sticking materials, cleaning and
preparation the surface to install the moquette according to specifications and
engineer instructions
M2 570
3.18 Supply and paint, plaster with one coat of bondrol primer and at least two coat of
External quality of colored emulsion paint (Supercryle) or equal approved as per
specifications, drawings and the engineer's instructions. M2 200
3.19 Supply and paint the internal walls up to a high of 2.2m above finishing floor level
two coats of putty, one undercoat primer and two coats of colored oil paint as per
specifications, drawings and the engineer's instructions. M2 950
3.20 Supply and paint one primer and minimum two coats of emulsion paint (Poliside)
for internal walls, ceiling and drop beams as per specifications, drawings & the
engineer's instructions.M2 200
3.21 Supply and install fire rated gypsum board 120cm width and 12mm thick sheets as
per specifications, drawings, and the engineer's instructions.
The price includes the galvanized columns, beams, angles, wires, painting with
supercryle after two layers of putty, and all the needed materials to complete the
job as per the manufacturer’s requirements. M2 660
Contractor Signature Stamp
AMultipurpose Hall Building
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
3.22 Supply and install gypsum tiles 60x60x1.5cm (Armstrong) as per specifications,
drawings, and the engineer's instructions.
The price includes the galv columns, beams, angles, wires and all the needed
materials to complete the job as per the manufacturer’s requirements.M2 220
3.23 Supply and cast foam concrete with fine aggregates for roof screening of ranging thickness from 4 to 15 cm and sand angle fillets size 5cmx5cm as per specifications, drawings and the engineer's instructions . M2 680
3.24 Supply and lay one layer of plasticized bitumen roofing membrane with chipping 4 mm thick, including priming concrete surface prior to laying, dressing into rain water outlets to form water proofing seal and cover the angle fillets. The rate include verticals parts skirting as per specification and drawings.Note: Measurement will be for the horizontal projection
M2 680
Total of Bill No. (3)
Contractor Signature Stamp
AMultipurpose Hall Building
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
Bill No. (4) Carpentry & Joinery Works
4.1 Supply, fix and paint wooden single internal flush door type D2 size 80x220x4.5cm
according to the drawing, specifications and under supervision. No. 2
4.2 Ditto, but for type D3, overall size 70x 220x4.5cm thickNo. 4
4.3 Ditto, but for type D5, overall size 90x 220x4.5cm thickNo. 6
4.4 Ditto, but for type D8, overall size 100x 220x4.5cm thickNo. 2
4.5 Supply and fix 120x20mm soft wood coat hook rail smoothed, plugged and screwed
to wall at 30cm center to center including priming and sanding sealer and two
coats of varnish painting with Galvanized steel coat hook screwed to rail at 20cm
center to center as per the engineer’s instructions.RM 8
4.6 Supply and fix high quality colored foldable theatre chair fixed to floor. The color
will be selected by the engineer.
The chair base and back are fabricated from sandwich covered with mahogany and
framed with painted natural timber. The base and back have high density sponge
and durable textile.
The base size is 50x50cm and 45cm high from the floor and 105cm for the back.
The chair includes hidden arm for writing in addition to hard plastic cover for the
base and back.
All as per specs, drawings and the engineer's instructions.
No. 432
Total of Bill No. (4)
Contractor Signature Stamp
AMultipurpose Hall Building
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
Bill No. (5) Aluminum & Metal Works
.The rates of the following items shall be Completed in accordance with drawings,
specifications, details and as directed by the engineer.
. Door frames shall fit walls & sizes of door openings, taking into consideration the
thickness of plastering on both sides of the frames.
. Hardware for doors shall be Waley type with approved handles.
.The aluminum windows are colored powder coated aluminum Jordanian Type
7000 / 4500 or approved equivalent with sliding leaves, frame, clear glass 4mm
thick, fly screen ironmongery, and hardware and aluminum accessories.
.The aluminum will be tested in approved testing laboratory.
. The contractor has to submit shop drawings to the engineer before fabrication
and installation.
5.1 Supply & install Mul‐T‐Lock door type 417 with overall size 125cm width x 220cm
height (D1) with powder coated paint. Door lock type 235 & Mul‐T‐Lock serrated
cylinder. All to be carried out according to the specifications, drawings & the
engineer's instructions.No. 2
5.2 Ditto, but with size 105 cm widths x 220cm height (D4). No. 1
5.3 Ditto, but with size 90 cm widths x 220cm height (D6).No. 3
5.4 Ditto, but with size 200 cm widths x 220cm height (D7).No. 1
5.5 Supply and fix powder coated colored aluminum window type "W4" size 150 cm
width x 150 cm height, (Type 7000) sliding leaves, fly screen leaves, frame, clear
glass 4mm thick, ironmongery, and hardware and aluminum accessories. All as per
specs, drawings and the engineer’s instructions.No. 4
5.6 Ditto, but type "W5" size 150 cm width x 70cm height.No. 3
5.7 Ditto, but type "W6" size 220 cm width x 150cm height. No. 2
5.8 Ditto, but type "W7" size 80 cm width x 80cm height. No. 2
5.9 Supply and fix powder coated colored aluminum type 4500 for hinged window
type "W8" size 95cm width x 705cm height, unclear glass 4mm thick, ironmongery
and hardware as per specifications and drawings. No. 2
5.10 Supply and fix galvanized steel protection for internal windows overall size 240x70
cm type (W2), the prices including all the steel, the fixation accessories, painting
with one primer coat & two coats of oil paint, all according to the drawings,
specification and engineer’s instructions. No. 6
5.11 Supply and fix galvanized steel protection for external windows overall size
150x150 cm type (W4), the prices including all the steel, the fixation accessories,
painting with one primer coat & two coats of oil paint, all according to the
drawings, specification and engineer’s instructions.
No. 4
5.12 Ditto, but size 150x70 cm type (W5)No. 3
5.13 Ditto, but size 220x150 cm type (W6)No. 2
5.14 Ditto, but size 80x80 cm type (W7)No. 2
5.15 Supply and fix stainless steel handrail for stair case pipe1.5” internal dia. 2.5mm
thick fixed to walls by stainless steel plate and 4 bolts stainless steel every 1.0m
and 10cm space between wall and the pipe. All as per specs, drawings and the
engineer's instructions.RM 20
Contractor Signature Stamp
AMultipurpose Hall Building
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
Total of Bill No. (5)
Bill No. (6) Plumbing & Sanitary Works
6.1 Supply and fix white glazed porcelain hand wash basin size 50cm x 41cm (Vitra type
6602+6173) or approved equivalent, complete with all water supply pipes ½",
waste fitting, trap, plug and chain, chromium plated water mixer 1/2" dia. Jack
type) (From Artema‐Armix or Hamat or approved equivalent) and mirror 60x60cm,
Supply & fix white glazed soap tray tiled into block walls, steel brackets supports
and the drainage line to floor trap 2”, all needed accessories & the pipe concrete
encasement as per specifications, drawings and the engineer's instructions.
No. 6
6.2 Supply & fix white glazed porcelain squatting W.C. suite (HARSA EUROPEAN ‐ TYPE
or approved equivalent) complete with porcelain flushing cistern, pip hose, 1/2"
dia. UPVC 100 cm long flushing pip hose for toilets, seat & plastic cover, white
glazed toilet paper holder tiled into block walls (size 15cmx15cm), 4" dia. P.V.C.
drainage pipe to the nearest main drainage line, all needed accessories & the pipe
concrete encasement (as shown in the drawings (Vitra‐Normus or approved
equivalent).
No. 6
6.3 Ditto, but higher than the standard with its stainless steel handrails one is fixed and
the other one is movable where the type is Vitra for persons with special needs
(Vitra‐Normus or approved equivalent). No. 2
6.4 Supply and fix 1" dia. galvanized pipe for drop water pipe connected from existing
building roof tanks to the water line as shown on the drawings and according to
engineer's instructions, the price shall include all necessary fitting, valves
excavations , backfilling, concrete encasement & all needed materials to complete
the job.
RM 15
6.5 Ditto but HDPE dia. 3/4" dia for cold water.RM 60
6.6 Supply and install UPVC pipes 4” diameter for drainage, with sockets joint 3.2 mm
wall thickness. The work shall include the excavation, backfilling, jointing, and the
pipe concrete encasement……. etc. to complete the job as per specifications,
drawings and the engineer's instructions. RM 15
6.7 Supply and install UPVC pipes 3” diameter for rain water drainage pipe, with
sockets, pipe joints, caps, supports and all needed materials to complete the job as
per specifications, drawings and the engineer's instructions. RM 40
6.8 Supply and fix floor trap 4" diameter, complete with heavy duty brass grating &
UPVC pipe to the nearest inlet with the pipe concrete encasement as per
specifications, drawings and the engineer's instructions. No. 10
6.9 Supply and install UPVC pipes 6” diameter for drainage, with sockets joint 4.7 mm
wall thickness. The work shall include the excavation, backfilling, jointing, and the
pipe concrete encasement, bedding and compacted backfilling with clean sand …….
etc. to complete the job as per specifications, drawings and the engineer's
instructions.
Also connect the sewer networks with the existing manhole as per drawings & the
engineer's instructions.
RM 20
Contractor Signature Stamp
AMultipurpose Hall Building
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
6.10 Ditto but 4” diameter for vent‐pipe. RM 10
6.11 Supply and install concrete manhole of internal diameter 60cm, and (50‐90) cm
depth according to the required level, 12cm thick plain concrete for walls and base,
slab, with cast iron cover with 8 ton bearing capacity according to I.S, specifications
and drawings. The price includes the connection to the existing manhole.No. 3
6.12 ditto but 80 cm diameter with depth up to 2.2m.No. 1
6.13 Supply and install an approved water distribution galvanized steel 2mm thick
cabinets with galvanized steel doors with switch locks and hammer paint for the
distribution water network with any number of cold water & hot water outlets with
polythene pipe HDPE 16 mm distribution pipes and the connection from the main
supply drop pipe G.S.P. to the distribution cabinets, air valves, gate vales, unions,
supports and all accessories needed to complete the job, all according to the
drawings, specifications & the engineer's instructions.
No. 1
Total of Bill No. (6)
Contractor Signature Stamp
AMultipurpose Hall Building
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
Bill No. (7) Electrical Works
The prices of all electrical works and installed equipment and components listed
below includes:
‐ Shop drawings ‐ As built ‐ ...
‐ Execution of all needed works & install all fittings and accessories required for
operation.
‐ All materials supplied (such as wires, pipes, electrical equipment…etc.) should be
of the best quality and must be approved by the supervising engineer.
‐ The work includes maintenance period for each device according to tradition in
the field.
‐ Oversees the installation and maintenance, a specialist in the field of devices
‐ Supply, Erect & Commission the electrical equipment according to the drawings,
specifications and the engineer's instructions. Also the work shall include workman
ship and all accessories needed to complete the job.
Lighting Fixtures
7.1 Supply and install surface mounting led lighting fixture ,2x16W, 1200mm ,230V,not
less than 100 Lummen/W , daylight 6500 K complete with lamps T8, driver, and
needed accessories as per drawings, specifications and according to supervisor
engineer instructions.
The price includes wires, conduits, fittings, accessories and any other needed
materials and workmanship to complete the job as per drawings specifications and
the engineer’s instructions.(Type is GAASH or equivalent brand name).
No. 25
7.2 Supply and install ceiling mounting round led light luminaire 17w with driver ,230
V, 1800 Lm ,daylight complete with lamps and needed accessories as per drawings,
specifications and according to supervisor engineer instructions.
The price includes wires, conduits, fittings, accessories and any other needed
materials and workmanship to complete the job as per drawings specifications and
the engineer’s instructions. (Type is GAASH or equivalent brand name). No. 14
7.3 Supply and install spot led light recessed luminaire 30w with driver ,230 V,not less
than 90‐100 Lummen/W ,daylight complete with lamps and all needed accessories
as per drawings, specifications and according to supervisor engineer instructions.
The price includes Bindle Cables , conduits, fittings, accessories and any other
needed materials and workmanship to complete the job as per drawings
specifications and the engineer’s instructions. (Type is LIPER or equivalent brand
name). according to EU specification.
No. 46
7.4 Supply and install 60x60cm led light recessed luminaire 40w ,230 V, 3400 Lm
,daylight complete with lamps drivers and needed accessories as per drawings,
specifications and according to supervisor engineer instructions.
The price includes Bindle Cables , conduits, fittings, accessories and any other
needed materials and workmanship to complete the job as per drawings
specifications and the engineer’s instructions. (Type is GAASH or equivalent brand
name). according to EU specification.
No. 106
Contractor Signature Stamp
AMultipurpose Hall Building
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
7.5 Supply & Install ceiling spot fixture 150W with halogen lamp daylight complete
with all needed Bindle Cables , conduits, fittings, accessories and any other needed
materials and workmanship to complete the job as per drawings specifications and
the engineer’s instructions. (Type is BRAND NAME or equivalent ). according to EU
specification.
No. 68
7.6 Supply & Install stair light fixture with LED 9W lamp, cool white ,820Lm,IP65,
complete for stairs (ST1 &ST2 &ST3) with all needed wires, conduits, fittings, and
accessories and any other needed materials and workmanship to complete the job
as per drawings specifications and the engineer’s instructions. (Type is GAASH or
equivalent brand name)
No. 51
7.7 Supply, install and operate of a surface , ceiling or wall mounted emergency
lighting fixture, 160Lm ,with 3W, LED lamp with 1HRS NI‐CD batteries including
wires 3X1.5mm2 with lamps, conduits, fittings, accessories and any other needed
materials and workmanship to complete the job as per drawings specifications and
the engineer’s instructions. (Type is GAASH 1838 Naama or equivalent brand
name)
No. 14
7.8 Supply, install and operate a lighting emergency (EXIT) sign surface or ceiling
mounted, LED lamp with 3Hours NI‐CD batteries including wires 3X1.5mm2 with
lamps, conduits, fittings, accessories and any other needed materials and
workmanship to complete the job as per drawings specifications and the engineer’s
instructions. (Type is GAASH or equivalent brand name)
No. 5
7.9 Supply, install and operate a preparation point ( light or data or camera ), complete
with all needed pipe , J.boxes, without wires or data cables according to the
engineer’s instructions.No. 15
7.10 Supply and Install flush single circuit, one way 220V,10A, on/off switch (bticino
matix or gewiss chorus or equivalent) complete with connection box ,supporter,
conduits, wires and all needed materials and workmanship to complete the job as
per drawings, specifications and the engineer’s instructions.No. 15
7.11 Ditto but double pole one way.No. 10
7.12 Ditto but triple pole one way.No. 10
7.13 Ditto but one pole two ways.No. 10
7.14 Ditto but double pole two ways.No. 10
7.15 Supply and Install flush single circuit, one way 220V, 10A, on/off switch (bush
button) type bticino matix or gewiss chorus or equivalent with indication lamp
complete with connection box ,supporter, conduits, wires and all needed materials
and workmanship to complete the job as per drawings, specifications and the
engineer’s instructions.
No. 4
7.16 Supply and Install single phase flush 220V,16A socket outlet type bticino matix or
gewiss chorus or equivalent with needed wires 3*2.5mm2 with conduits, fittings,
support ,accessories and any other needed materials and workmanship to
complete the job as per drawings specifications and the engineer’s instructions. No. 42
7.17 Supply and Install flush telephone socket outlet, 6 wires pin type bticino matix or
gewiss chorus or equivalent with needed cable as per drawings, specifications and
any other needed materials and workmanship to complete the job as per drawings
specifications and the engineer’s instructions.No. 5
Contractor Signature Stamp
AMultipurpose Hall Building
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
7.18 Supply and Install computer data, flush socket outlet, type bticino matix or gewiss
chorus or equivalent, with UTP cables CAT6 from the rack to the socket and any
other needed materials and workmanship to complete the job as per drawings
specifications and the engineer’s instructions.No. 19
7.19 Supply, install and fix adjustable flush mounting floor box Legrand Type (24
modules) with stainless cover. The price includes conduits, j. boxes, fittings,
accessories and any other needed materials and workmanship to complete the job
as per drawings specifications and the engineer’s instructions.
NOTE: suitable for concrete foundations.
No. 3
7.20 Supply and install addressable Fire Alarm control Panel (Type is Telefire or
equivalent ), 2 loops, including power supply , all needed j‐boxes , wires, batteries
, with all the necessary materials to complete the works with as programming and
operating …. etc. according to the drawings, technical specifications and the
engineer’s instructions.No. 1
7.21 Supply and install addressable smoke detector including wiring and conduits and
any other needed materials and workmanship to complete the job as per drawings
specifications and the engineer’s instructions. No. 15
7.22 Supply and install addressable heat detector including wiring and conduits and any
other needed materials and workmanship to complete the job. No. 3
7.23 Supply and install flusher LED on + fire bell (compact unit) with conduits, fittings,
accessories and any other needed materials and workmanship to complete the job. No. 4
7.24 Supply and install button operation BREAK GLASS , with plastic cover with all the
necessary wires, conduits, accessories, and any other needed materials and
workmanship to complete the job.No. 4
7.25 Supply and install an assembly box type GEWISS No. PT48. Or equivalent. as per the
engineer’s instructions. No. 8
7.26 Supply and install extract fann 8" (Type Vents or equivalent) and all needed
accessories,louvers, Frames and any other needed materials and workmanship to
complete the job as per drawings specs and engineer’s instructions. No. 4
PUBLIC ADDRESS (SOUND) SYSTEM
Supply ,Install,Connect,and Test the Following Item Below with all requirements to
finish work complete with all accessories, all equipment items for the
loudspeaker,Amplifire, Mixer,... shall be manufactured by Behringer or Inter‐M or
equivalent. Work is to include the supply of the equipment specified installation of
,connection, wiring ,commissioning,Transportation,testing, and all other details ,the
prices including all connectors,adapters,plugs.All the requirements according to
Specifications, drawings, and Engineers instructions.
7.27 Power Amplifier as per engineer instructions with all required cables , junction
boxes conduits and all necessary accessorieand the following specifications:
Nominal max power 1000 Watt
Frquacey response 50‐1500HZ
Signal To noise ratio > 80 db
Outputs /ohms 4,8,16 ohm
Outpust / volt 50, 100v
(Type Behringer or Inter‐M or approved equivalent).
No. 1
7.28 1600‐Watt 16‐Channel Powered Mixer with Multi‐FX Processor and FBQ Feedback
Detection System , type is
(Behringer EUROPOWER PMP4000 or approved equivalent). No. 1
7.29 Ceiling loud Speaker , 8'' diameter
Rated Power 10W. ncluding all required cables (2,5 mm2) , junction boxes conduits
and, metal front protection mesh, clips for quick attachment , line transformer all
necessary accessories (Type is Bosch,Cotina or equivalent)
No. 15
Contractor Signature Stamp
AMultipurpose Hall Building
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
7.30 Vocal Descktop Microphone type SHURE # SM58 as per specifications and engineer
instructions.No. 6
7.31 Wireless Vocal Microphone, with Internal Battery. (Type is SHURE or equivalent)
The item includes:
‐ Charger Base with Power Supply: 220 VAC, 50 Hz.
‐ Battery: 2 Pcs.
‐ standard base controller with stand and cables for amplifier connection with 5‐pin
DIN connector.
No. 2
7.32 supply and install Main sound system Aluminum rack with all needed suitable
dimensions, shelfs and size to install all component mentioned in sound system
items (size must be 30% increasing for future extinction No. 1
7.33 Amplifier (Mic) socket out let,complete with PVC conduits, J.boxes, wiring, and all
necessary accessories to complete the job.(Type is Philips RCT or equivalent )
Distribution Switch Boards
Supply, install & commission to complete the job for the followings, the type is
MOELLER or approved equivalent:
7.34 Supply and install main power distribution board MDB, complete with additional
30% free space for future extension according to the drawings, technical
specifications, installation instructions and the supervising engineer’s instructions.
The frame of MDB is galvanized steel sheet with 2mm thickness and antistatic
primer paint and 2 coats of final polyester paint. The size & dimensions of MDB
must be enough & suitable for assemble and maintain easily all panel components
listed below.The size of the pannel will be determined after approved the
shopdrawings from the GEDCO & Supervision engineer Contractor must submit
shop drawing before manufacturing and obtain the supervising engineer’s
approval to proceed the manufacturing. Also the shop drawing must be more
detailed with all MDB components (types, ratings, specifications …etc.) also the
shop drawing must be approved by (GEDCO).
The price include all neede wires , bus bars , accessories , ....
N.O 1
7.35 supply & install 0‐500A digital Ammeter with all neededN.O 3
7.36 supply & install 0‐500 V digital voltmeter with all needed , LTL , selector swunit 1
7.37 3‐Color indication lamps with ltl fuse set 3
7.38 400/5A Current Transformers N.O 15
7.39 Three phase KWH meter, 5A, 380 V N.O 1
7.40 Single phase KWH meter, 5A, 380 V N.O 3
7.41 Three phase KVARH meter 5A ,380V N.O 1
7.42 Three phase main fused switch (LTL)3*630/400A with 3*400A HRC fuse , 400V ,120
KA . Moeller type or equivalent. N.O 1
7.43 M.C.C.B 3*400A , with external hand, NZM‐N3‐400A or equivalent .N.O 2
7.44 Four poles Motorized Automatic transfer switch ( ATS)2* (4*630A NZM‐N3‐
4*630A) or equivalent complete with motor control and with all needed
equipment and control as per drawings and according to supervisor engineer
instructions .
unit 1
7.45 MC.C.B 3*100A ‐ NZM‐B1‐3*100A or equivalent N.O 1
7.46 MC.C.B 3*40A NZM‐B1‐3*63,40A or equivalent N.O 4
7.47 MC.C.B 4*250A NZM‐N2‐4*250A or equivalent . N.O 1
7.48 Manual 12 Poles Change over 400V,630A , Type Is SECOMIC or equivalent. N.O 1
7.49 Three poles M.C. B 3X16A, (Type is Moeller or equivalent). N.O 1
7.50 Supply & Install automatic Power Factor Correction Unit complete with all
components and all needed protection devices as per drawing with , LTL 250A ,
CONTROL PANEL , 80 KVAR capacity 6 stage according to GEDCO Specifications &
Regulations with all needed according to supervisor engineer instructions.unit 1
Contractor Signature Stamp
AMultipurpose Hall Building
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
7.51 Supply & install the distribution switch board No. P/DA including the following
listed components with all needed wirings,B.B. , fittings and accessories according
to specifications & supervisor instructions as follow: ‐ The frame must be made of
2mm thickness galvanized steel sheets & painted with antistatic primer paint and 2
coats of final polyester paint. The size is 80*60*20cm
N.O 1
7.52 MCB 4 poles 4*63A, 400V. (Type is Moeller or equivalent). N.O 1
7.53 Four poles ELCB 4*40A/0.03A (Type is Moeller or equivalent). N.O 1
7.54 Four poles M.C.B. 4X25A, 400V (Type is Moeller or equivalent). N.O 2
7.55 Four poles E.LC.B. ELCB 4*25A/0.03A, (Type is Moeller or equivalent).N.O 2
7.56 Four poles M.C.B. 4X40A, (Type is Moeller or equivalent). N.O 1
7.57 Two poles M.C.B 2x16A‐220V (Type is Moeller or equivalent). N.O 6
7.58 Two poles M.C.B. 2x10 A, (Type is Moeller or equivalent). N.O 26
7.59 Two poles M.C.B. 2x6A, 220V (Type is Moeller or equivalent). N.O 2
7.6 Supply& install the distribution switch board No. P/DB according to the drawing
and specifications with all needed wirings, B.B., fittings and accessories according
to supervisor instructions as follow:
‐ The Panel must be made of 2mm thickness galvanized steel sheets.
‐ The P/DB board Size is 80*60cm , includes supplying and installing the following
listed components with all needed wirings according to specifications & supervisor
engineer’s instructions.
N.O 1
7.61 MCB 4X63A , (Type is Moeller or equivalent). N.O 1
7.62 Four poles ELCB 4*40A/0.03A (Type is Moeller or equivalent). N.O 1
7.63 Four poles E.LC.B. ELCB 4*25A/0.03A, (Type is Moeller or equivalent). N.O 2
7.65 Four poles M.C. B 4X16A, (Type is Moeller or equivalent). N.O 1
7.66 Two poles M.C.B 2x16A, (Type is Moeller or equivalent) N.O 8
7.67 Two poles M.C.B 2x10A, (Type is Moeller or equivalent). N.O 7
7.68 Four poles M.C. B 4X40A, (Type is Moeller or equivalent). N.O 1
7.69 Four poles M.C. B 4X25A, 380V (Type is Moeller or equivalent). N.O 1
7.7 Supply & Install the 40*60 cm distribution switch board No. P/DC according to
drawing and specifications with all needed wirings, fittings and accessories
according to supervisor instructions as follow:
The Panel must be made of 2mm thickness galvanized steel sheets
‐ The P/DC board prize includes supplying and installing the following listed
components with all needed wirings according to specifications & supervisor
engineer instructions.
N.O 1
7.71 Four poles M.C.B. 4X40A, (Type is Moeller or equivalent). N.O 1
7.72 Four poles ELCB 4*40A/0.03A (Type is Moeller or equivalent).N.O 1
7.73 Four poles E.LC.B. ELCB 4*25A/0.03A, (Type is Moeller or equivalent).N.O 1
7.74 Four poles M.C. B 4X25A, (Type is Moeller or equivalent). N.O 1
7.75 Four poles M.C. B 4X16A, (Type is Moeller or equivalent). N.O 1
Contractor Signature Stamp
AMultipurpose Hall Building
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
7.76 Two poles M. C. B2X16A, (Type is Moeller or equivalent). N.O 6
7.77 Two poles M. C. B2X10 A(Type is Moeller or equivalent). N.O 5
7.78 Step Relay 16A. N.O 1
7.79 Supply & Install the distribution switch board No. AC/Roof according to drawing
and specifications with all needed wirings, fittings and accessories according to
supervisor instructions as follow:
‐ The Panel must be made of 2mm thickness galvanized steel sheets
‐ size include all materials + 40% spare
‐ The AC/Roof board prize includes supplying and installing the following listed
components with all needed wirings according to specifications & supervisor
engineer instructions
N.O 1
7.8 M.C.C.B 3X250A,380V type NZM‐N1‐3*250A (Type is Moeller or equivalent).N.O 1
7.81 M.C.C.B.3X160A,380V type NZM‐N1‐3*160A (Type is Moeller or equivalent).N.O 2
7.82 Supply& Install the 40*60CM distribution switch board No. P/Basement according
to drawing and specifications with all needed wirings, fittings and accessories
according to supervisor instructions as follow:
‐ The frame specifications are the same as mentioned for P/DA Switchboard.
‐ The Panel must be made of 2mm thickness galvanized steel sheets
‐ The P/Basement board prize includes supplying and installing the following listed
components with all needed wirings according to specifications & supervisor
engineer instructions.
N.O 1
7.83 Four poles E.LC.B. ELCB 4*25A/0.03A, (Type is Moeller or equivalent).N.O 1
7.84 Two poles M. C.B 2x16A (Type is Moeller or equivalent). N.O 3
7.85 Two poles M. C.B 2x6A (Type is Moeller or equivalent). N.O 3
7.86 Four poles M.C.B. 4X16A, (Type is Moeller or equivalent). N.O 1
7.87 Supplying and install Dimming and control Lighting Panel (for hall),table mounting
Complete according to drawing and supervisor engineer’s instructions The price
includes the ,wiring, fittings, accessories and any other needed materials and
workmanship to complete the job ( also all components must be Gawiss type or
equivalent ) the board include the listed litem *The
contractor must submit shop drawing before start work
unit 1
7.88 Flash two pole on/off Switch type gawiss or equivalent N.O 9
7.89 Flash Dimmer Switch 10A/220V type gawiss or equivalent N.O 15
Cables & Manholes
Supply and install the following cable according to the drawings, specifications and
the engineer's instructions:
7.90 Supply and install underground double circuit cables XLPE (N 2XY) AL.
2x(4x150mm2) inside PVC SN8 pipes 6 inch one pipe for each cable from
proposed transformer to new MDB as per drawings, specifications, GEDCO
regulations and the engineer’s instructions, the price of cable includes pipes
warning tapes, clean sand, civil works and any other needed materials and
workmanship to complete the job as per drawings specifications and the engineer’s
instructions.
L.M 100
7.91 Supply and Install 3x25+16mm2+E16mm2 copper XLPE (N2XY) cable in side 4"pvc ‐
SN8 pipes, with needed hot galvanized steel cable guard and Cable tray . from MDB
to (P/DA & P/DB ) panel. With all civil works and any other needed materials and
workmanship to complete the job as per drawings specifications and the engineer’s
instructions.
L.M 60
Contractor Signature Stamp
AMultipurpose Hall Building
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
7.92 Supply and Install 5*16mm2 copper XLPE (N2XY) cable in side 4"pvc ‐SN8 pipes,
with needed hot galvanized steel cable guard and Cable tray . from MDB to (P/DA
& P/DB ) panel. With all civil works and any other needed materials and
workmanship to complete the job as per drawings specifications and the engineer’s
instructions.
L.M 100
7.93 Supply and Install 5*10mm2 copper XLPE (N2XY) cable in side 4"pvc ‐SN8 pipes,
with needed hot galvanized steel cable guard and Cable tray . from MDB to (P/DA
& P/DB ) panel. With all civil works and any other needed materials and
workmanship to complete the job as per drawings specifications and the engineer’s
instructions.
L.M 100
7.94 Supply and Install (3x120+70+ E 70) copper XLPE (N2XY) cable in side 4"pvc ‐SN8
pipes, with needed hot galvanized steel cable guard and Cable tray . from MDB to
AC/Roof . With all civil works and any other needed materials and workmanship to
complete the job as per drawings specifications and the engineer’s instructions. L.M 40
7.95 Supply and Install (3x50+25+E25mm2) copper XLPE (N2XY) cable in side 4"pvc ‐
SN8 pipes, with needed hot galvanized steel cable guard and Cable tray . from new
MDB to old existing MDB power supply connection . With all needed civil works
and any other needed materials and workmanship to complete the job as per
drawings specifications and the engineer’s instructions , Includes Dismantle the old
cable and connect the new one
L.M 40
7.96 Supplying and executing 80cm interior diameter manhole for electrical power and
telephone cables, with 8‐ton cover, 15cm base course and all the needed materials
and workmanship to complete the job as requested by the engineer. No. 11
7.97 Supplying and executing 60cm interior diameter manhole for electrical power and
telephone cables, with 8‐ton cover, 15cm base course and all the needed materials
and workmanship to complete the job as requested by the engineer. No. 4
Stage Lighting System requirement
Supply and install the following items according to the drawings, specifications and
the engineer's instructions:
Contractor Signature Stamp
AMultipurpose Hall Building
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
7.98
24‐way patch panel to accommodate (24) sockets to be connected to stage spot
lighting system and dimmer panel of stage lighting. No. 1
7.99
Control Dimmer board system consists of 24‐way (dimmers) , each rated at 20A for
stage lighting and controls variable load from 80W to 2000W of tungsten lamps on
220/240V, complete with programmable, DMX Console ,DMX 24CH Dimmer Pack
in Fly Case with all accessories needed or equivalent as per drawing and the
engineer's instructions.
No. 1
7.100
Supply and install pvc conduits, cables, needed for future installation of Digital
Conference System
as shown in the drawings, specifications and engineer's instructions. LS 1
7.101
Supplying and installing foundation earthing systems consisting of welding 3X35mm
galvanized steel sheets and connection to the distribution boards, R.≤5 Ohm, as per
drawings, specifications and engineer's instructions.
Digital Conference System
Supply, install, connect and commissioning complete in place and in an operatable
manner Digital Conference System similar to BOSCH or equivalent, including
equipment, installation, connection and wiring as specified in the technical
specifications and shown on drawings and the engineer’s instructions.
LS 1
Total of Bill No. (7)
Contractor Signature Stamp
AMultipurpose Hall Building
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
Bill No. (8) HVAC Works
8.1
Supply, install, test and commission a roof top unit of a BRAND name (US,
European, Japan only) unit to be of a cooling load 116kw, with a heat pump, with a
maximum power consumption of 48kw, unit to be with scroll compressors with
inverter for soft starting and economic control, the total air flow to be 11160cfm
with a high static pressure variable speed fan, unit to be double skin with thermal
insulation not less than 5cm fiber glass, refrigerant to be of environment friendly
R407, unit to be with all controls for protection, air control, temp. Control and work
for optimum efficiency. Unit to be with all needed accessories as per specifications,
drawings and the engineer's instructions.
Unit 2
8.2
Supply, install, test and commission a ducted concealed split unit with inverter to
be of 60,000 btu/hr, complete with filters, high static pressure fan, flexible
connection, electrical control panel, copper cooling coil, remote control, room
thermostat, and an outdoor unit with the galvanized steel base, heat pump reverse
cycle for heating, scroll compressor and all related works as per specifications,
drawings and the engineer's instructions.
Unit 1
8.3
Ditto, but decorative type, of a cooling capacity of 12000btu/h, with inverter type
as per specifications, drawings and the engineer's instructions. Unit 4
8.4
Supply, install and commission an aluminum adjustable air outlets for distributing
the air, a jet type is required to supply the air to the bottom, square or round type
is acceptable, the air volume to be of 530 cfm, color to be specified by supervisor.
All to be executed as per specifications, drawings and the engineer's instructions. No. 63
8.5 Ditto, but for return air, grill type. No. 12
8.6 Ditto, but of size 60x60cm. No. 2
8.7 Ditto, but air louver 200x80cm. No. 2
8.8
Supply, fabricate, install and commission hot dip a galvanized steel metal sheet
duct of thickness 0.7‐1.0 mm for supply air and return air, according to the
drawings and duct standards (SMACNA), duct to be with thermal insulation of fiber
glass 24kg/m3, and 1‐inch thickness (Indoor the building), with all dampers,
splitters, fasteners, screws and all related works. All to be executed as per
specifications, drawings and the engineer's instructions.
M2 450
8.9
Ditto, but for external the building, to be with 5cm thickness insulation of 48kg/m3
fiber glass, duct to be with an aluminum cladding of 0.5mm thickness.
All to be executed as per specifications, drawings and the engineer's instructions. M2 50
8.10
Supply & cast ready mix concrete 200 kg/cm2 under the HVAC roof top units 20cm
thick with steel mesh 10 mm diameter every 20cm and 5.0cm polystyrene as
shown on the drawings, specifications and the engineer's instructionsM2 50
Total of Bill No. (8)
Bill No. (9) Miscellaneous Works
9.1 Supply and fix fire extinguisher, 6kg capacity filled with CO2, fixed at 2m height. As No. 2
9.2 Ditto but filled with dry powder 3.0kg. No. 2
Total of Bill No. (9)
Contractor Signature Stamp
AMultipurpose Hall Building
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
SUBTOTAL OF (A) M.P.H Building
1Bill No. (1) Excavation & Earth Works
2Bill No. (2) Concrete & Block Works
3Bill No. (3) Finishing Works
4Bill No. (4) Carpentry & Joinery Works
5Bill No. (5) Aluminum & metal Works
6Bill No. (6) Plumbing & Sanitary Works
7Bill No. (7) Electrical Works
8Bill No. (8) HVAC Works
9Bill No. (9) Miscellaneous Works
‐SUB TOTAL
Contractor Signature Stamp
B LABS Building
Unit Rate Total
$ Amount $
(B) Labs Building
Construction Works : Labs Building
Bill No. (1) Excavation & Earth Works
1.1 Excavation for foundations from natural ground level up to the
required designed level. The works including:
‐ The compaction of the soil surfaces to get (98% MDD).
‐ The excavated material should be removed out from the site to the
approved places.
‐ All to be executed as per specifications, drawings and the engineer’s
instructions.
M3 220
1.2 Supply, fill by using approved material (clean sand) around the
foundations & inside the building up to the required levels, which shall
be spread in layers not exceeding 25cm each one & compacted (98%)
to reach up the required levels (under floor slab), according to the
specifications & the engineer's instructions.M
3 180
Total of Bill No. (1)
Item
Description
Unit Qty.
Contractor Signature Stamp
B LABS Building
Unit Rate Total
$ Amount $
Item
Description
Unit Qty.
Bill No. (2) Concrete & Block Works
A‐ Concrete Works
Rates of Concrete Works shall include: ‐
‐ All form works and shuttering in any form, shape and size. Making
chamfered and curved edges, allowing for and making grooves and
sleeves and the like; removal of forms and cleaning of all exposed tie
wires and rods; making good the harmed surfaces and edges and all
surface finishing.
‐ Supplying, Casting, vibrating and curing as per specifications.
‐ Approved additives and admixtures.
‐ Incurred costs on Concrete Mix Designs, Sample taking, testing and
providing test results certificates, storing and saving of samples.
‐ Supplying reinforcement of any grade, size and length as detailed in
the drawings, storing on site including cutting, bending and fixing in
position and providing all tying wires, spacers, shop drawings, testing
and bar bending schedules
‐ Painting of exposed surfaces of underground reinforced concrete
elements with primer and two coats of hot bituminous paint (75/25),
the strokes of each layer to be opposite to each other.
‐ Underground concrete elements prices are including expansion
joints, flexcell sheets 18mm thick & mastic.
‐ Steel bars used for alignment and fixing of reinforcement works, and
extra steel added to assure proper detailing and safety.
‐Supply & spread polythene sheets gauge 500 under the foundations &
ground slabs.
‐ Measurement of Concrete elements shall be the net dimensions as
detailed in the drawings. All recesses openings and voids shall be
deducted.
‐ Measurement shall be only for the seen surfaces of elements.
Overlapping and measuring items twice under separate headings shall
not be allowed.
‐ Columns are to be measured from the top level of the slab to the
bottom level of the beam or dropped beam.
‐ The concrete surface must be finished with mechanical steel trowel
machine.
All works must be done as per drawings, specifications & the
engineer's instructions.
2.1 Supply & cast plain concrete (200kg/cm2) under the foundations.M3 5
2.2 Supply & cast ready mix concrete (300kg/cm2) for reinforced concrete
foundationsM
3 38
2.3 Supply & cast ready mix concrete B300 for columns necks as shown on
the drawings, specifications and the engineer's instructions. M3 2
Contractor Signature Stamp
B LABS Building
Unit Rate Total
$ Amount $
Item
Description
Unit Qty.
2.4 Supply & cast ready mix concrete B300 for tie ground beams.M
3 15
2.5 Supply & cast ready mix concrete B250 for ground slab 10cm thick with
steel mesh T8/20cm each way. M2 205
2.6 Supply & cast ready mix concrete B300 for columns as shown on the
drawings, specifications and the engineer's instructions. M3 20
2.7 Ditto but B200 for stop columns at roof.M3 2
2.8 Supply & cast ready mix concrete B300 for suspended hollow block
slabs 30cm thick, including the hollow cement blocks, reinforced
concrete hidden, inverted & drop beams & all the required materials. M2 700
2.9 Supply & cast ready mix concrete B250 for doors & windows lintels,
sills & canopies including all the required materials. M3 23
2.10 Ditto, but for parapet walls coping & external concrete elements.M
3 3
2.11 Supply & cast ready mix concrete B200 under the elevated water tanks
20cm thick with steel mesh 10 mm diameter every 20cm and 5.0cm
polystyrene as shown on the drawings, specifications and the
engineer's instructions.
M2 6
B‐ Block Works: ‐
2.12 Supply & build hollow block walling 20cm thick including the supplying
of all materials (block size 20 x 20 x 40cm). M2 500
2.13 Supply & build hollow block walling 15cm thick including the supplying
of all materials (block size 15 x 20 x 40cm). M2 60
2.14 Supply & build hollow block walling 10cm thick including the supplying
of all materials (block size 10 x 20 x 40cm). M2 55
Total of Bill No. (2)
Contractor Signature Stamp
B LABS Building
Unit Rate Total
$ Amount $
Item
Description
Unit Qty.
Bill No. (3) Finishing Works
3.1 Supply & execute internal plastering 13mm thick to walls, soffits &
columns including galvanized metal lath angles for columns, edges &
chicken wire at the intersection of concrete & block works, pipes &
cement rendering as per the engineer's instructions.M2 1100
3.2 Ditto but for cielings according as per specifications and engineer
instructions. M2 650
3.3 Ditto, but for external plastering 15mm thick to walls and soffits the
price including additional layer of 5mm thick lime free mortar (mix 1:
3) as per specs, drawings and the engineer’s instructions.M2 100
3.4 Supply and install west bank smooth stone 5.0 cm thick with backing
filling 5.0cm (Grade B‐200) with steel mesh 6mm dia @ 20cmm as per
the engineer's instructions.M2 150
3.5 Ditto but Molatash 5.0 cm thick with backing filling 5.0cm.M
2 500
3.6 Supply and install terrazzo floor tiles (grade A) size 25x25x2.5cm with
Basalt stone laid on 2cm mortar bed and 5 cm thick sand bed and
terrazzo skirting 25x7x1cm including all materials and testing as per
the engineer's instructions.M2 550
3.7 Supply and cast terrazzo edge beam 20cm x10cm of the same kind
and color of the floor tiles including smoothing the surfaces and edges
(for corridors) as per the engineer's instructions.M2 10
3.8 Supply and install local marble (grade A) size 34cm wide x 3cm thick
laid on 2 cm thick mortar bed as per specifications, drawings, and the
engineer's instructions.
The item shall include suppling and installing 2cm local marble
between the aluminum window and the mentioned marble, this
marble has the same aluminum window depth.
RM 50
3.9 Ditto but size 36 cm wide x 3cm thick for roof parapet. RM 70
3.10 Ditto but size 30 cm wide x 3cm thick for corridors parapet.RM 60
3.11 Ditto but threshold size 23 cm wide x 3cm thick for doors.RM 20
3.12 Supply and erect marble 2 cm thick for buffet and canteen 400 cm
lengths, 60 cm wide and 87 cm high including vertical dividers, internal
horizontal shelves, back of cupboards, floors and granite (Tiger eye) for
the top surface with round edges, skirting 10 cm high and making the
needed opening for basins as shown in drawings. The work shall also
include the cupboard leaves, drawers which will be made of 17mm
plywood covered with colored Formica 0.5mm sheets from both sides
Unit 1
3.13 Supply and install high quality Granite 593x90x2cm thick (Tiger Eye) for
top cover of experiment chemistry lab preparing bench. The price shall
include the local marble grade A, supports, shelves, all accessories,
granite skirting 10 cm high, all accessories, fittings, making holes for
basin and water and gas supply, water mixer, cold and hot water
networks, drainage network, and gas supply distribution network in
accordance with the specs, drawings and the engineer's instructions.
Unit 4
Contractor Signature Stamp
B LABS Building
Unit Rate Total
$ Amount $
Item
Description
Unit Qty.
3.14 Supply and install high quality Granite 257x75x2cm thick (Tiger Eye) for
top cover of demonstration chemistry lab bench. The price shall
include the local marble grade A, supports, shelves, granite skirting 10
cm high, all accessories, fittings, making holes for basin and water and
gas supply, water mixer, cold and hot water networks, drainage
network, and gas supply distribution network in accordance with the
specifications, drawings and the engineer's instructions.
Unit 1
3.15 Ditto but for physical lab demonstration bench without gas supply.Unit 1
3.16 Supply and install colored none slipping ceramic (grade A) 8mm thick
for floor.M
2 80
3.17 Supply and install colored glazed wall tiles (grade A) 6mm thick laid on
2cm mortar (1:3).M2 260
3.18 Supply and paint, external soffits, sloping soffits, facade and external
columns with one coat of bondrol primer and at least two coat of
External quality of colored emulsion paint (Supercryle) or equal
approved as per specifications, drawings and the engineer's
instructions.
M2 100
3.19 Supply and paint the internal walls up to a high of 2.2m above finishing
floor level two coats of putty, one undercoat primer and two coats of
colored oil paint as per specs, drawings & the engineer's instructions. M2 550
3.20 Supply and paint one primer and minimum two coats of emulsion
paint (Poliside) for internal walls, ceiling and drop beams as per
specifications, drawings & the engineer's instructions.M2 1000
3.21 Supply and cast foam concrete with fine aggregates for roof screening of ranging thickness from 4 to 15 cm and sand angle fillets size 5cmx5cm as per specifications, drawings and the engineer's instructions .
M2 227
3.22 Supply and lay one layer of plasticized bitumen roofing membrane with chipping 4 mm thick, including priming concrete surface prior to laying, dressing into rain water outlets to form water proofing seal and cover the angle fillets. The rate include verticals parts skirting as per specification and drawings.Note: Measurement will be for the horizontal projection
M2 227
3.23 Supply and execute expansion joint at the roof as detailed in drawings
including flexcell sheets 18mm thick, (THIOMOFLEX 600) mastic 20mm
thick and all reinforced concrete inverted beams & other elements as
per drawings, specifications & the engineer's instructions.RM 10
3.24 Supply and execute expansion joint on the floors as detailed in
drawings including flexcell sheets 18mm thick, 20x30mm (NETO 280)
mastic, 2 Nos. of galvanized steel angle size 75x75x5mm & 1.0m wide
strip of self‐adhesive membrane 4.0kg/m2 as per drawings,
specifications and the engineer’s instructions.
RM 7
3.25 Supply and execute expansion joint at sides of walls and columns as
detailed in drawings including flexcell sheets 18mm thick,
(THIOMOFLEX 600) mastic 20mm thick & cover the joints with
aluminum strip size 75x6mm or aluminum angle 57x57x6mm fixed to
aluminum strip 37x6mm screwed to the walls or the soffits from one
side, as per drawings, specifications and the engineer’s instructions.
RM 15
Total of Bill No. (3)
Contractor Signature Stamp
B LABS Building
Unit Rate Total
$ Amount $
Item
Description
Unit Qty.
Bill No. (4) Carpentry & Joinery Works
The items include supplying carpentry works from good wood include
frame cover mold, architrave, galvanized steel frame, concrete filling
200kg/cm2, 20cm Aluminum kick plates, hard ware lock type Wally
switch or approved equivalent and brass hinges 10cm height and all
other fittings, colored Formica, primer, undercoat and two coats of
color paint, all as per specifications, drawings, the engineer’s
approval.
4.1 Supply, fix and paint wooden single internal flush door type D2 size
80x220x4.5cm according to the drawing, specifications and under
supervision.
No. 6
4.2 Ditto, but for type D3, overall size 70x 220x4.5cm thick. No. 12
4.3 Supply and fix 120x20mm soft wood coat hook rail smoothed, plugged
and screwed to wall at 30cm center to center including priming and
sanding sealer and two coats of varnish painting with Galvanized steel
coat hook screwed to rail at 20cm center to center as per the
engineer’s instructions.
RM 8
4.4 Supply and fix soft wood rubbing rails size 200mm x 20mm with round
edges, smooth surface, apply two coats of sanding sealer, sand lightly
and apply two coats of varnish, drill and fix to concrete or block walls
using expansion steel bolts.
RM 45
4.5 Supply and install wall mounted magnetic white marker board , 25 mm
profile KALBOARD MW 3612/CR size 120x360 cm) with silver anodized
elegant aluminum frame (19x25mm thick) and four strong rounded
plastic (upvc) corners fixed internally with screws to the wall, and also
with silver anodized aluminum try fixed by sliding through the profile
which used for markers and duster and has UPVC edges for safety.
The writing surface coated of Porcelain fixed by using automatic gluing
machines to 11mm thick MDF wood covered automatically by
aluminum foils. Price to include all related works as per drawings,
specification and Engineer’s Instructions. the price shall include
removing the existing boards and handled to the owner.
No. 4
Total of Bill No. (4)
Contractor Signature Stamp
B LABS Building
Unit Rate Total
$ Amount $
Item
Description
Unit Qty.
Bill No. (5) Aluminum & Metal Works
. The rates of the following items shall be Completed in accordance
with drawings, specifications, details and as directed by the engineer.
. Door frames shall fit walls & sizes of door openings, taking into
consideration the thickness of plastering on both sides of the frames.
. Hardware for doors shall be Waley type with approved handles.
. The aluminum windows are colored powder coated aluminum
Jordanian type 7000 / 4500 or approved equivalent with sliding
leaves, frame, clear glass 4mm thick, fly screen ironmongery, and
hardware and aluminum accessories.
. The aluminum will be tested in approved testing laboratory.
. The contractor has to submit shop drawings to the engineer before
fabrication and installation.
5.1 Supply & install Mul‐T‐Lock door type 417 with overall size 125cm
width x 220cm height (D1) with powder coated paint. Door lock type
235 & Mul‐T‐Lock serrated cylinder. All to be carried out according to
the specifications, drawings & the engineer's instructions.
No. 4
5.2 Ditto, but with size 105 cm widths x 220cm height (D4).No. 1
5.3 Supply and fix powder coated colored aluminum window type "W1"
size 220 cm width x 120 cm height, (model 7000) sliding leaves, fly
screen leaves, frame, clear glass 4mm thick, ironmongery, and
hardware and aluminum accessories. All as per specifications,
drawings and the engineer’s instructions.
No. 12
5.4 Ditto, but type "W2" size 240 cm width x 70cm height. No. 6
5.5 Supply and fix powder coated colored aluminum type model 4500 for
window type "W3" size 100cm width x 70cm height with two hinged at
the mid, unclear glass 4mm thick, ironmongery and hardware as per
specifications and drawings.
No. 6
5.6 Supply & fix galvanized steel protection for external Windows size
220x120cm type "W1", the prices including all the galvanized steel, the
fixation accessories, painting with one primer coat & two coats of oil
paint, all according to the drawings, specification and engineer’s
instructions.
m2 12
5.7 Supply and fix galvanized steel protection for internal windows overall
size 240x70 cm type (W2), the prices including all the steel, the fixation
accessories, painting with one primer coat & two coats of oil paint, all
according to the drawings, specification and engineer’s instructions.
No. 6
5.8 Ditto, but for windows type "W3" size 100cm width x 70cm.No. 6
5.9 Supply & fix galvanized steel protection for external Windows size
220x67.52cm type (W1),at first & second floors, the prices including all
the galvanized steel, the fixation accessories, painting with one primer
coat & two coats of oil paint, all according to the drawings,
specification and engineer’s instructions.
No. 8
5.10 Supply & fix mild steel balustrade 60cm high for corridor at ground
floor comprising of mild steel hollow section tubes 40 x 20 x 2 mm
verticals spacing 15 cm center to center, & welded to mild steel hollow
section coping 60x40x3 mm top & hollow section tube 60x40x3 mm
bottom, the price includes mild steel end angles & plates, painting with
one primer, one under coats & minimum two coats of oil paint, (the
color to be approved by the Engineer, all as per specifications,
drawings & the engineer's instructions.
RM 30
Total of Bill No. (5)
Contractor Signature Stamp
B LABS Building
Unit Rate Total
$ Amount $
Item
Description
Unit Qty.
Bill No. (6) Plumbing & Sanitary Works
. The rates of the following items shall be completed in accordance
with the drawings; specs, details and as directed by the engineer.
. The contractor must submit the shop drawings to the engineer's
approval before starting the work.
. The contractor must submit the as built drawings to the engineer's
approval after completing the work.
. All materials used for plumbing works shall be of high quality
materials based on the British standards and must be approved by the
engineer, the price shall include fittings, connections, accessories,
testing and all the needed materials to complete the job according to
the specifications, conditions of contract, drawings & engineer’s
approval.
. The used cold water pipes are galvanized steel pipes (Akko) / HDPE
pipe.
. The used hot water pipes are galvanized steel pipes (Akko) with heat
insulation (Armoflex) / HDPE pipe.
. The drainage pipes (UPVC, Fittings ... etc.) from Holiout must be
according to the drawings & engineer's instructions.
. All fittings, accessories, valves, brackets, connections and all the
needed materials to complete the job are included.
. Chlorination, flushing & testing must be carried out according to the
specifications & the engineer’s instructions.
6.1 Supply and fix white glazed porcelain hand wash basin size 50cm x
41cm (Vitra type 6602+6173) or approved equivalent, complete with
all water supply pipes ½", waste fitting, trap, plug and chain, chromium
plated water mixer 1/2" dia. Jack type) (From Artema‐Armix or Hamat
or approved equivalent) and mirror 60x60cm, Supply & fix white
glazed soap tray tiled into block walls, steel brackets supports and the
drainage line to floor trap 2”, all needed accessories & the pipe
concrete encasement as per specifications, drawings and the
engineer's instructions.
No. 12
6.2 Supply & fix porcelain kitchen sink with two bowls built in the granite
work top for buffet including water supply pipes ½”, waste fitting, trap,
plug & ½" swan neck chromium plated water mixer 1/2" dia. Jack type)
(From Artema‐Armix or Hamat or approved equivalent) & the
drainage line to floor trap & all needed accessories. All as per specs,
drawings and the engineer instructions.
No. 1
6.3 Supply & fix white glazed porcelain squatting W.C. suite (HARSA
EUROPEAN ‐ TYPE or approved equivalent) complete with porcelain
flushing cistern, pip hose, 1/2" dia. UPVC 100 cm long flushing pip hose
for toilets, seat & plastic cover, white glazed toilet paper holder tiled
into block walls (size 15cmx15cm), 4" dia. P.V.C. drainage pipe to the
nearest main drainage line, all needed accessories & the pipe concrete
encasement (as shown in the drawings (Vitra‐Normus or approved
equivalent).
No. 12
Contractor Signature Stamp
B LABS Building
Unit Rate Total
$ Amount $
Item
Description
Unit Qty.
6.4 Supply & fix 1.5" dia galvanized pipe for main water supply connected
from the existing water pump line to the building network as shown on
the drawings & as per the engineer’s instructions, the price shall
include all the necessary fittings, valves, excavations, backfilling,
concrete encasement & all needed materials to complete the job.
RM 75
6.5 Supply & fix 1" dia. galvanized pipe inside pvc 2” sleeve pipe for drop
water pipe connected from the school roof tanks to the water line as
shown on the drawings and according to the engineer’s instructions,
the price shall include all the necessary fittings, valves, excavations,
backfilling, concrete encasement & all needed materials to complete
the job.
RM 15
6.6 Ditto but 1.5" dia for water risers and distribution lines embedded in
block works or lay under floor tiles or on roofs.RM 15
6.7 Ditto but HDPE dia. 3/4" dia for cold water. RM 240
6.8 Supply and install UPVC pipes 6” diameter for drainage, with sockets
joint 4.7 mm wall thickness. The work shall include the excavation,
backfilling, jointing, and the pipe concrete encasement……. etc. to
complete the job as per specifications, drawings and the engineer's
instructions.
Also connect the sewer networks with the existing manhole as per
drawings; the work shall include the municipal fees and all the needed
material to complete the job as per the engineer's instructions.
RM 15
6.9 Supply and install UPVC pipes 4” diameter for drainage, with sockets
joint 3.2 mm wall thickness. The work shall include the excavation,
backfilling, jointing, and the pipe concrete encasement……. etc. to
complete the job as per specifications, drawings and the engineer's
instructions.
RM 95
6.10 Supply and install UPVC pipes 3” diameter for rain water drainage
pipe, with sockets, pipe joints, caps, supports and all needed materials
to complete the job as per specifications, drawings and the engineer's
instructions.
RM 35
6.11 Ditto but 4” diameter for vent‐pipe. RM 10
Contractor Signature Stamp
B LABS Building
Unit Rate Total
$ Amount $
Item
Description
Unit Qty.
6.12 Supply and fix floor trap 4" diameter, complete with heavy duty brass
grating & UPVC pipe to the nearest inlet with the pipe concrete
encasement as per specifications, drawings and the engineer's
instructions.
No. 28
6.13 Supply and install concrete manhole of internal diameter 60cm, and
(50‐90) cm depth according to the required level, 12cm thick plain
concrete for walls and base, slab, with cast iron cover with 8 ton
bearing capacity according to I.S, specifications and drawings.
No. 4
6.14 Supply & install 1.5 m3 local made black polyethylene water tank with
lockable cover, fittings, vent pipes, overflow, drain, connections, galv.
Steel tank stand, valves, float switches & the required accessories
according to the drawings, specs & engineer's approval.
the item shall include supply & install galvanized steel stand for water
tank with all the required accessories rest on 30x30x3.0cm thick
marble footings according to the drawings, specifications & engineer's
approval.
No. 3
6.15 Supply, install and fix gas system with control valves (S&B or
equivalent), gauge pressure (16bar, R & R or equivalent), wooden gas
junction box size 40x40x20cm including one leaf cover and 3x36kg gas
cylinders and all gas pipes, burners, connection and all accessories
needed to complete the gas network and connect the gas to the
benches to gas valves (SG‐1 Sagir or equivalent) for Labs units, all
according to the drawings, specifications & the engineer's instructions.
L.S 1
6.16 Supply and install an approved water distribution galvanized steel
2mm thick cabinets with galvanized steel doors with switch locks and
hammer paint for the distribution water network with any number of
cold water & hot water outlets with polythene pipe HDPE 16 mm
distribution pipes and the connection from the main supply drop pipe
G.S.P. to the distribution cabinets, air valves, gate vales, unions,
supports and all accessories needed to complete the job, all according
to the drawings, specifications & the engineer's instructions.
No. 3
Total of Bill No. (6)
Contractor Signature Stamp
B LABS Building
Unit Rate Total
$ Amount $
Item
Description
Unit Qty.
Bill No. (7) Electrical Works
The prices of all electrical works and installed equipment and
components listed below includes:
‐ Shop drawings ‐ As built ‐ ...
‐ Execution of all needed works & install all fittings and accessories
required for operation.
‐ All materials supplied (such as wires, pipes, electrical
equipment…etc.) should be of the best quality and must be approved
by the supervising engineer.
‐ The work includes maintenance period for each device according to
tradition in the field.
‐ Oversees the installation and maintenance, a specialist in the field of
devices
‐ Supply, Erect & Commission the electrical equipment according to
the drawings, specifications and the engineer's instructions. Also the
work shall include workman ship and all accessories needed to
complete the job.
7.1 Supply and install LED lighting fixture 2X24w complete with driver,
type GA’ASH model Batten LED, or equivalent, including 120cm day
light lamps T8, 6500 ,2500Lm each lamp, 3X1.5 mm2 wires, conduits,
clamps and bolts, and connection boxes, and all other fitting and
accessories. needed to complete work as per drawing and specification
and engineer instruction.
No. 48
7.2 Ditto but 1x24w with special reflector for black board.No. 8
7.3 Ditto, but ceiling round luminaire, water proof IP65, 16w LED ,4000
complete with driver, type GA’ASH model Hermon or equivalent As
per drawings and specification and engineer instruction.No. 20
7.4 Supply and install single pole 10A, 220V, ON/OFF switch, the work shall
include all the needed accessories such as wires 3x1.5mm2, pipes,
boxes, covers, fixing bolts, connection……...etc. The type is Gewiss or
approved equivalent.
No. 12
7.5 Ditto, but single pole waterproof switch.No. 6
7.6 Ditto but single pole, two‐way switch, single pole, 10A, 220V (fixel).No. 4
7.7 Ditto but, flush mounting socket outlet (2P+E) 10/16A, including
3x2.5mm2 wires, covers, conduits, bolts, clamps, and connection
boxes, complete with all accessories for connection and
commissioning.
No. 20
7.8 Ditto but Waterproof socket outlet (2P+E) 10/16A, including 3x2.5mm2
wires, covers, conduits, bolts, clamps, and connection boxes, complete
with all accessories for connection and commissioning.No. 42
7.9 Ditto but telephone socket including 2 pair telephone cable complete
with all needed wire and accessoriesNo. 6
7.10 Supply and install 10” school electrical bell with two push buttons,
including wires, conduits, clamps, bolts connection boxes ……. Etc, all
according to the drawings, specifications & the engineer's instructions.No. 1
7.11 Supplying and installing electrical ceiling fan 220V\125W, with its
wires, conduits, switch, connections…. etc. Type is CHMC or approved
equivalent.No. 12
Contractor Signature Stamp
B LABS Building
Unit Rate Total
$ Amount $
Item
Description
Unit Qty.
7.12 Supplying and installing, 2x60W RMS REAL, amplifier with two horn
loud speakers waterproof type, 50 W each, two microphones, and
connections…. etc. including conduits, 2 cables for loud speakers, and
all needed accessories.No. 1
7.13 Supplying and installing amplifier socket out let, waterproof type,
including conduits, sockets and speakers’ cables 3x2.5 mm2 with all
needed accessories.No. 2
7.14 Supplying and installing foundation earthing systems consisting of
welding 3X35mm galvanized steel sheets and connection to the
distribution boards, R.≤ 3 Ohm, as per drawings, specifications and
engineer's instructions.L.S 1
7.15 Supplying and executing 60cm interior diameter manhole for electrical
power and telephone cables, with 8‐ton cover, 15cm base course and
all the needed materials and workmanship to complete the job as
requested by the engineer.
No. 3
Distribution Switch Boards
7.16 Supply& Install the Sub distribution switch board No. SDB/G according
to drawing and specifications with all needed wirings, fittings and
accessories according to supervisor instructions as follow:
The Panel must be made of 2mm thickness galvanized steel sheets
‐ The SDB/G board prize includes supplying and installing the listed
below components with all needed wirings according to specifications
& supervisor engineer instructions.
No. 1
a Four poles M.C.B. 4X40A, (Type is Moeller or equivalent). No. 3
b Four poles M.C.B. 4X25A, 400V (Type is Moeller or equivalent). No. 1
c Four poles E.LC.B. ELCB 4*25A/0.03A, (Type is Moeller or equivalent).No. 1
d M.C.B. 3X10A, (Type is Moeller or equivalent).No. 1
e Four poles E.LC.B. (R.C.C.B.) 4X10A, 380V ABB/F204A‐40/0.03A or
equivalent. No. 1
f Four poles M.C.B. 4X20A, 400V (Type is Moeller or equivalent). No. 2
g One poles M.C.B 1x16A‐220V (Type is Moeller or equivalent). No. 4
h One poles M.C.B 1x10A‐220V (Type is Moeller or equivalent). No. 4
7.17 Supply& Install the Sub distribution switch board No. SDB/F (first floor
) according to drawing and specifications with all needed wirings,
fittings and accessories according to supervisor instructions as follow:
The Panel must be made of 2mm thickness galvanized steel sheets
‐ The SDB/F board prize includes supplying and installing the listed
below components with all needed wirings according to specifications
& supervisor engineer instructions.
No. 1
a Four poles M.C.B. 4X20A, 400V (Type is Moeller or equivalent). No. 1
b Four poles E.LC.B. ELCB 4*25A/0.03A, (Type is Moeller or equivalent).No. 2
d M.C.B. 3X10A, (Type is Moeller or equivalent). No. 1
e M.C.B. 3X16A, (Type is Moeller or equivalent). No. 1
f One poles M.C.B 1x10A‐220V (Type is Moeller or equivalent). No. 4
g One poles M.C.B 1x16A‐220V (Type is Moeller or equivalent). No. 9
Contractor Signature Stamp
B LABS Building
Unit Rate Total
$ Amount $
Item
Description
Unit Qty.
7.18 Supply& Install the Sub distribution switch board No. SDB/S (Second
floor ) according to drawing and specifications with all needed wirings,
fittings and accessories according to supervisor instructions as follow:
‐ The Panel must be made of 2mm thickness galvanized steel sheets
‐ The SDB/S board prize includes supplying and installing the listed
below components with all needed wirings according to specifications
& supervisor engineer instructions.
No. 1
a Four poles M.C.B. 4X20A, 400V (Type is Moeller or equivalent). No. 1
b Four poles E.LC.B. ELCB 4*25A/0.03A, (Type is Moeller or equivalent).No. 2
d M.C.B. 3X10A, (Type is Moeller or equivalent). No. 1
e M.C.B. 3X16A, (Type is Moeller or equivalent). No. 1
f One poles M.C.B 1x10A‐220V (Type is Moeller or equivalent). No. 4
g One poles M.C.B 1x16A‐220V (Type is Moeller or equivalent). No. 9
7.19 Supply and install computer Patch Panel, type ORLAN or 3 COM or
equivalent, for 24 computer data outlets CAT6, with connections,
name plates and numbering.No. 2
7.20 Supply and install computer data switch type Cissco or equivalent, 24
ports, including connections, name plates and numbering. No. 2
Total of Bill No. (7)
Bill No. (8) Miscellaneous Works
8.1 Supply and fix fire extinguisher, 6kg capacity filled with CO2, fixed at
2m height. As per specification, drawings and according to the
Palestinian fire defence department's requirements. No. 2
8.2 Ditto but filled with dry powder 3.0kg. No. 2
Total of Bill No. (8)
Contractor Signature Stamp
B LABS Building
Unit Rate Total
$ Amount $
Item
Description
Unit Qty.
SUBTOTAL OF (B) LABS Building
1 Bill No. (1) Excavation & Earth Works
2 Bill No. (2) Concrete & Block Works
3 Bill No. (3) Finishing Works
4 Bill No. (4) Carpentry & Joinery Works
5 Bill No. (5) Aluminum & metal Works
6 Bill No. (6) Plumbing & Sanitary Works
7 Bill No. (7) Electrical Works
8 Bill No. (8) Miscellaneous Works
‐ SUB TOTAL
Contractor Signature Stamp
Unit Rate Total
$ Amount $
( C) Construction Works : External
A –The Demolishing, Earth & Tiling Works:
1 Carefully demolish the existing external steps and reinstate the
works to its original conditions as shown in the drawings and in
accordance to the engineer's instructions. The price includes
removing of all the debris from site to approved places.
L.S 1
2 Leveling from natural ground level up to the required site designed
levels. The works including:
The compaction of the soil surfaces to get (98% MDD). The
excavated material should be removed out from the site to the
approved places as per specs, drawings and the engineer's
instructions.
M2 400
3 Supply, fill by using approved material (clean kurkar), which shall be
spread in layers not exceeding 25cm each one & compacted (98%) to
reach up the required levels according to the specifications & the
engineer's instructions.
M3 200
4 Supply, spreading, levelling, damping and compacting 20cm (M.D.D
100%) of base coarse material according to the drawings,
specifications and the engineer's instructions.M
2 100
5 Supply, spread, lay, colored interlock tiles 6cm thick, the price
includes 5 cm clean sand, 10cm (M.D.D 100%) of base coarse
material compacting, tiles, testing as per specification, drawing & the
engineer's instructions, the interlocking tiles shape & color must be
approved by the engineer.
M2 370
B ‐Retaining Wall Works.
Earthing Works:
6 Excavation from natural ground level to required retaining walls
foundations designed level. The works include the compaction of the
soil surfaces to get (98% MDD). The excavated material should be
removed out from the site to the approved places as per the
engineer's instructions.
M3 80
7 Supply, fill by using approved material (clean sand) around the
foundations, which shall be spread in layers not exceeding 25cm
each one & compacted (98%) to reach up the required levels
according to the engineer's instructions.M
3 55
Item
Description
Unit Qty.
Contractor Signature Stamp
Unit Rate Total
$ Amount $
Item
Description
Unit Qty.
Concrete Works
Rates of Concrete Works shall include: ‐
‐ All form works and shuttering in any form, shape and size. Making
chamfered and curved edges, allowing for and making grooves &
sleeves and the like; removal of forms & cleaning of all exposed tie
wires & rods; making good the harmed surfaces & edges & all
surface finishing.
‐ Supplying, Casting, vibrating & curing as per specifications.
‐ Approved additives and admixtures.
‐ Incurred costs on Concrete Mix Designs, Sample taking, testing and
providing test results certificates, storing and saving of samples.
‐ Supplying reinforcement of any grade, size & length as detailed in
the drawings, storing on site including cutting, bending and fixing in
position and providing all tying wires, spacers, shop drawings,
testing and bar bending schedules .
Painting of exposed surfaces of underground reinforced concrete
elements with primer and two coats of hot bituminous paint
(75/25), the strokes of each layer to be opposite to each other.
‐ Steel bars used for alignment and fixing of reinforcement works,
and extra steel added to assure proper detailing and safety.
‐ Measurement of Concrete elements shall be the net dimensions as
detailed in the drawings. All recesses openings and voids shall be
deducted.
‐ Measurement shall be only for the seen surfaces of elements.
Overlapping and measuring items twice under separate headings
shall not be allowed.
‐ The concrete surface must be finished with mechanical steel trowel
machine.
‐he prices shall include Supply & spread polythene sheets gauge 500
under the foundations & ground slabs.
All works must be done as per drawings, specifications & the
engineer's instructions.
8 Supply & cast plain concrete B150 under the foundations.M
3 3
9 Supply & cast ready mix concrete B300 for reinforced concrete
foundations and retaining walls (weep holes to be provided). M3 30
10 Ditto, but for external steps. M3 8
Contractor Signature Stamp
Unit Rate Total
$ Amount $
Item
Description
Unit Qty.
Finishing Works:
The price shall include the supply of all materials, galvanized
angles, galvanized mesh, mixing, scaffolding, curing, site cleaning,
equipment and workmanship required to complete the job
according to the specifications, drawings & engineer's approval.
11 Supply & execute external plastering 15mm thick to walls and soffits,
the price shall include additional layer of 5mm thick lime free mortar
(mix 1:3) as per specs, drawings & the engineer’s instructions. M2 100
12 Supply & execute two coats of Tyrolean finish with white cement &
painting with one coat of superbondrol then apply two coats of
colored emulsion paint (Supercryle) for boundary wall according to
specs & the engineer's instructions.M
2 100
13 Supply and lay local marble stair treads size 36 cm wide x 3cm thick
chamfered once, rebated once and laid on 2cm thick mortar bed and
the price includes marble stair risers size 12.0cm or 12.5 high x2cm
thick and skirting 7/20cm high x2cm thick as per specs, drawings and
the engineer ‘s instructions.
RM 60
D‐ Planting Works:
Supply, plant and maintain the flowing plants, trees & grass
including all needed materials & workmanship to complete the job
according to the drawings, specifications and the engineer’s
instructions for the following items: ‐
14 Supply, fill and spread agricultural soil of not less than 30cm thick up
to the required levels for the green areas as shown in the drawings,
specifications and the engineer’s instructions. M2 35
15 Relocate some of the existing trees by replanting them to new
locations including all the needed materials to complete the job as
shown in the drawings, specs and the engineer’s instructions. No. 7
16 Supply and plant climbers (BOUGAINVILLEA), (6‐8) litter pot, height
is more than 1.0 meter and girth not less than 1.5cm as per the
engineer instructions. No. 5
Contractor Signature Stamp
Unit Rate Total
$ Amount $
Item
Description
Unit Qty.
E‐ Plumbing and Sanitary Works
17 Supply & install stainless steel drinking unit (cylindrical shape) 1.5m3
capacity, 1.5mm thick wall thickness composed of 12 Nos. of self‐
pushing water taps 1/2" dia., stainless steel taps covers, inlet
stainless steel pipe 3" dia. with elbow & firefighting connection,
stainless steel vent pipe 3/4" dia. with elbow, level guide, 30cm dia.
Stainless steel cover 4mm thick with gasket, 4 No. of stainless steel
profile 80x80x3mm legs with 80cm height, 4 Nos. of stainless steel
bolts for each leg, stainless steel drainage pipe 2" dia. connected to
the nearest manhole & all needed fittings & materials to complete
the job, the price also includes the supplying & casting of the
reinforced concrete footings size 200x200x30cm with double steel
mesh 10mm dia. each 20cm as per drawings, specifications & the
engineer's instructions.
No. 1
18 Supply & fix 1.5" dia. galvanized pipe for main water supply
connected from the existing main water line & the water tanks as
shown on the drawings & as per the engineer’s instructions, the
price shall include all the necessary fittings, valves, excavations,
backfilling, concrete encasement & all needed materials to complete
the job.
RM 30
19 Ditto but 1" dia for water distribution lines. RM 20
20 Ditto but 3/4" dia for garden water lines. RM 50
21 Supply & fix 3/4" dia. Garden water tap.No. 3
22 Excavate and construct percolation pit with a depth of 5.0 m and
inside diameter of 2.50 m with a special block for percolation pit,
supply and install reinforced concrete 300 Kg/cm2 with thickness of
25 cm for the cover of the percolation pit and supply and install cast
iron cover (8.0‐ton capacity and 60 cm opening diameter). The price
includes supplying and laying well graded aggregate of thickness of
40 cm at the bottom of the pit, backfilling around the pit with kurkar
in layers 20cm thick each and compaction 98% MDD and connect the
existing house sewer to the pit with approved pipe type & diameter,
removing the surplus soil to the tip.... etc. to complete the job as per
drawing and Engineer’s instruction.
No. 1
Contractor Signature Stamp
Unit Rate Total
$ Amount $
Item
Description
Unit Qty.
F‐ Miscellaneous Works
23 Supply & lay Hydraulically pressed to BS 7263 pre‐cast concrete
kerbstones for the sidewalks with size of (15x30x100cm) including all
necessary excavations, filling with dune sand & compaction to 98%
of MDD, the base coarse layer (30x13 cm), 200Kg/cm2 plain
concrete foundation (27x12cm) under the kerb and (21x12cm)
backing behind, spreading 2 cm mortar under the kerb, filling joints
between kerbs with cement mortar and painting with one prime
coat and two finishing coats of approved brand name painting
material ,expansion joint every 12 meter with selotex board and
filling 3cm with seka.
RM 110
24 Supply and cast R.C. ready mix concrete B 250 for the external steps
ramps and others. M3 20
25 Supply and cast ready mix plain concrete 200 kg/cm2 under the
external steps, and others. M3 5
26 Supply & fix mild steel balustrade 80cm high for corridor at ground
floor comprising of mild steel hollow section tubes 40 x 20 x 2 mm
verticals spacing 15 cm center to center, & welded to mild steel
hollow section coping 60x40x3 mm top & hollow section tube
60x40x3 mm bottom, the price includes mild steel end angles &
plates, painting with one primer, one under coats & minimum two
coats of oil paint, (the color to be approved by the Engineer, all as
per specifications, drawings & the engineer's instructions.
RM 40
27 Supply & install smooth surface pre cast reinforced concrete B300
seat size 180x45cm, the price includes the painting of the seats with
one coat of Superbandrol & at least two coats of colored emulsion
paint (Supercrelye) according to the drawings, specs and the
engineer’s instructions.
No. 13
28 Supply and fix galvanized steel bin 3mm thick, galvanized Steel pipe
2 inch in diameter, galvanized Steel strip 10mm thick with fixing
plates, anchors and anchor bolts…etc. Price to include excavation
and all concrete works 40x40x40cm, as per drawings and according
to engineer instructions.
No. 9
29 Supply, fill & spread 60cm depth of gravel size ranging from 2.0 to
15.0 cm in layers for the green area according to the drawings,
specifications and the engineer's instructions. The price includes the
excavation from natural ground levels to the required designed
levels & the excavated materials should be removed out from the
site to the approved places.
M2 130
Total of Bill No. (1)
SUBTOTAL OF (C) External Works
1 Bill No. (1) External Works
‐ SUB TOTAL
Contractor Signature Stamp
(D) provisional items works
Unit Rate Total
$ Amount $
Bill No. (1) Electricity Items
1‐Main Power Supply Components
1.1 Supply and install outdoor 250 KVA‐22/0.4KV transformer completed
with all other needed component Such as Lattice steel pole with base,
steel arms, fuse holder,36 Kv isolator , Low voltage main LTL switch, also
price include all needed M.V cables , With all needed civil works and
any other needed materials and workmanship to complete the job
according to GDECO design study drawings specifications and the
engineer’s instructions
LS 1
1.2 Enlargement of the existing power supply sub scription from 3x100A to
3x400A with tacking in consideration Removing the old existing WH
meter,and rearrange the panel , according to GDECO regulation with
complete needed feesLS 1
2‐Stage Lighting System
Supply and install the following items according to the drawings,
specifications and the engineer's instructions:
‐the cost of all ducts required should be charged within concrete and
block works
1.3
Stage lighting system
(optional item –1)
‐ 500 W Fresnel spot lights as (SFR) of FURSE or equivalent.No. 4
1.4 650 W Fresnel spot lights as (JER/TH) of FURSE or equivalent. No. 4
1.5 1000W Fresnel spot lights as (MFR/TH) of FURSE or equivalent. No. 6
1.6 500W profile spot lights as (SPR/TH) of FURSE or equivalent. No. 4
1.7 650W profile spot lights as (SPR/TH) of FURSE or equivalent. No. 4
1.8 1000 profile spot lights as (MPR/TH) of FURSE or equivalent. No. 6
1.950 mm diameter aluminum spot bars complete with all accessories
needed as cat No.30. 1B. 12 of FURSE or equivalent. RM 50
1.10
Stage lighting system
(optional item –2)
Supply, install, connect & commission stage lighting as follows:
3. Variable Beam Angle profile spot light
‐ 1000/1200 Z 00 TWW of CCT Lighting
No. 3
1.11 1000/1200 Z 00TX of CCT Lighting. No. 3
1.12 2000/1200 Z0 DWW of CCT Lighting No. 3
1.134. Starlette Fresnel projectors:
‐ 1000/1200 Z0050Fresnel of CCT LightingNo. 3
1.14 2000 Z0080 Fresnel of CCT Lighting. No. 3
1.155. Condenser Variable bean profile:
‐ 650 Z0602 minute of CCT Lighting.No. 5
1.16 650 0603 minute of CCT Lighting No. 5
1.17 500/650 0608 minute of CCT Lighting. No. 5
1.18 6. Spot bars of (CCT Lighting) MR 50
1.19 7. Connector Box (of CCT Lighting) No. 4
1.20 8. load Sockets of (CCT Lighting) No. 30
1.21
9. Starlette Fresnel projectors
‐ 1000/1200 Z0050Fresnel of CCT Lighting No. 6
Item
Description
Unit Qty.
Contractor Signature Stamp
(D) provisional items works
Unit Rate Total
$ Amount $Item
Description
Unit Qty.
System Video Conference
1.22
System Video Conference
‐Pcs‐1p
Quantity:1
‐ ISDN MCU software (MB Memory Stick) PCS‐320M1
Quantity:1
‐ Wired Microphone for PCS‐1PVC SYSTEM‐PCS‐A1
Quantity:1
‐6 BRI ISDN UNIT FOR PCS‐IP VC SYSTEM‐PCS‐B384
Quantity:1
‐ DATA SOLUTION BOX/PCS‐DSB1
Quantity:1
‐ Microphone Mc – 906
Quantity:1
No. 1
1.23
Supply, install, connect & commission
Video projection system complete with wires, cables, conduits, boxes
and all accessories as shown in the drawings and specifications 650W
profile spot lights as (SPR/TH) of FURSE or equivalent.No. 4
1.24
. XGA data video projector as per specifications.
Quantity:1
. Video cassette player recorder. Quantity:1
. Motorized large screen. Quantity:1
. Wiring network.
Quantity:1
. Installation & system functioning.
Quantity:1
. Total value of equipment.
Quantity:1
LS 1
Total of Bill No. (1)
‐ SUB TOTAL of (D) provisional items works
Contractor Signature Stamp
Total Amount
( $ )
Construction Works : ( A) M.P.H Building
Construction Works : ( B) Labs Building
Construction Works : ( C) External Works
Construction Works : ( D) provisional items Works
Grand total of the school works
Title: ………………………………………..……………………..………………………….………….
Telephone:………………………………………………………………………………………..…….
Fax: ……………………………………………………………………………………………...……….
Mobile: …………………………………………………….…..………………………………..……….
Lot 2: Rehabilitation Works for the Rosary Sisters School
General Summary
Item Description
Total in numbers: ........................................................................................................................
Total in letters: .............................................................................................................................
Name of the contractor: ………….………..……………………………………………………......
Authorized signature: ……………...………………….………………………………………...…..
Signature and Sealing:…………………………………………………...…………………….…….
Page 43 of 43 Contractor Signature Stamp