multiple-use, tape/target-free agvs - agvsystems.com · system application information for budget...
TRANSCRIPT
Multiple-Use, Tape/Target-Free AGVs
SYSTEM APPLICA TION INFORMATION FOR BUDGET PRICING
Attachment-Configurable Automatic Guided Vehicles • Single vehicle design supports variety of applications and
can be re-purposed for changing needs.
• Reduce manual cart and material transport labor $$$ andtrack every move.
• Accurate positioning for Interfaces with conveyors, robots,and automatic battery charging.
• Integrate with host systems (WMS, WCS, remote I/O, IT andPLC networks) for automatic AGV ‘from/to’ transportmissions.
• Infinitely scalable – start small and easily add more units,path, destinations.
• Zero-maintenance, ‘virtual path’ for quick change flexibility.
INSTRUCTIONS:
1. Complete relevant portions of this form as best possible.
2. Please return to Savant and an AGV ApplicationSpecialist will review the submitted information, contactyou to discuss a recommended system concept andprepare a budgetary or firm price proposal.
Email Form To [email protected] or [email protected]
Phone Contact: Garry Koff (616) 485-6300 Chris Anderson (616) 791-8540 x233
Mail to: Savant Automation Inc. 2748-A Courier Dr. NW Grand Rapids, MI 49534
PROJECT CONTACT SITE INSTALLATION LOCATION
Customer Name: Facility: Combination
Address:
Contact Name: Expected Purchase Date:
Email Address: Desired Delivery Date:
Title: Project Funding: Approved Budget
Telephone No.: Pre-Approval Feasibility
General Required Information
Capacities:
• 1,700 lbs.
• 5,000 lbs.
• 10,000 lbs.
New Existing
© Copyright 2018 Savant Automation, Inc.
SYSTEM APPLICATION INFORMATION FOR BUDGET PRICING
Savant Automation, Inc. page 2 of 6 FORM: 0318DATAFORM
AGV Stays Under Cart AGV Drives Under and Automatically Captures Cart
Use existing carts or, Will purchase new carts
Cart dimensions: ” L x ” W Max.
Cart weight including max. load lbs
Vertical clearance under cart “ Must be same for all carts
Single Dual Powered Roller Powered Lift
Load Transfer Elevation Above Floor: ”
Pick/Drop at: Powered Gravity Conveyor Stands
Carts hitched/Unhitched by Operator
Automatic Cart String Hitch/Unhitch
Select Cart Type:
All Carts/Dollies//Trailer Must Have Fixed Rear Hitches
Cart Size: “ L x ” W x “ H
Loaded Cart Wt.: lbs. Number of Carts Towed:
Type of Hitch: Ball
Ring-Pintle
Bail--Jaw
Hook-Eye
Under Platform Cart
Powered Deck Cart
Tow Multiple Carts
SYSTEM APPLICATION INFORMATION FOR BUDGET PRICING
Savant Automation, Inc. page 3 of 6 FORM: 0318DATAFORM
Automatic Pick/Drop Manual Pick/Drop
Tote Size: “L x “W x “H
Tote Weight lbs.
Number of Tote Compartments
Max Number Totes Carried
Type of Assembly Line Process: Synchronized Index
Asynchronous Index
Continuous Movement @ feet per minute
Type of Assembly stations (choose one or more):
# of manual process stations
# of automatic process stations
Line Rate: per hour
Work piece rotation required? Yes No
Work piece elevation required? Yes No
2,000 lbs. capacity
4,000 lbs. capacity
Load Weight lbs.
Load Size: “L x W x “H
Clearance for lift under load “ Must be same for all loads
10,000 lbs. capacity
30,000 lbs. capacity
50,000 lbs. capacity
Tote Deck Carts
Assembly Line
Floor Lift AGV
High Capacity Tow AGV
Please complete additional info listed in Tow Multiple Carts section on page 2
SYSTEM APPLICATION INFORMATION FOR BUDGET PRICING
Savant Automation, Inc. page 4 of 6 FORM: 0318DATAFORM
Approx. Length of Path Feet Number of Destinations
All Indoor Indoor / Outdoor
Narrowest Aisle Width Inches
Door Interfaces # of Fire Doors # of Automatic Doors
Inclines/Ramps “ Length “ Width “ Rise
“ “ “
Floor Surface Concrete Wood Block Steel Tile/Plate
Poly Block Wood Plank
Floor Condition Rough Smooth Minor Cracks
Dry Wet Oily
Floor Discontinuities Expansion Joints, Size Number
Drains Covers, Size Number
Bridge Crossings, Size Number
In-floor Rail Size Number
Load Activity Shifts Per Day Hours Per Shift
From Location
To Location
No. of Loads/Hr. From
Location To
Location
No. of Loads/Hr.
Peak Avg. Peak Avg.
System Information
SYSTEM APPLICATION INFORMATION FOR BUDGET PRICING
Savant Automation, Inc. page 5 of 6 FORM: 0318DATAFORM
Vehicles will be Dispatched Using:
Manual Dispatch - Operator Dispatches Vehicle
Using On-board Vehicle Tablet
Using central ‘Circulator’ Application to Create Repetitive Destination Vehicle Routes
Remote Dispatch - Vehicle is Dispatched Automatically
Using Station-initiated Signal to Call for Vehicle
Pushbutton Locations - HMI Locations - Automatic Load Sensing Locations -
Using Control Interface to Other Computer/PLC Systems That Provide Load Pick & Drop Destinations
PLC Network Warehouse Management/Control System (WMS/WCS)
Mfg. Execution System (MES) Production Control System (PCS) Other
Standard Manual Exchange Opportunity (Automatic) Charging Manual Connect to Charger
Submit AutoCAD Drawing of Customer Facility with Suggested Path Route Showing Destinations
Provide Sketch of AGV Path (pdf, image, etc.) Showing Destinations
1. Please return this per instructions on page 1, along with a preliminary path drawing and any pictures ofloads, carts, travel areas, station areas, and load pick/drop interface equipment.
2. A Savant AGV Application Specialist will review the submitted information, contact you to discuss arecommended system concept and prepare a budgetary or firm price proposal.
Interfaces with Robots or Other Automation
Describe System Operation
System Layout - Please Do One of the Following:
System Management
Battery Charging
NEXT STEP