multiple ssid with multiple vlans configuration example on cisco aironet aps
DESCRIPTION
Multiple SSID With Multiple VLANs configuration example on Cisco Aironet APs. By Surendra B.G TAC Engineer, Cisco Systems. Config Check points. Assumption:- I assume that you have configured the DHCP pool on the IOS switch or the Router or on the dedicated DHCP server. - PowerPoint PPT PresentationTRANSCRIPT
Multiple SSID With Multiple VLANs configuration example on Cisco Aironet APs
By Surendra B.G TAC Engineer, Cisco Systems.
Config Check points• Assumption:- I assume that you have configured the DHCP pool on the IOS switch or
the Router or on the dedicated DHCP server.• Design:- • Assuming we have 2 VLANs (51 and 52 ) with native as 10 and mapping
to 2 different SSIDs (one and two) on any Aironet Access Points. • SSID ONE uses WEP encryption• SSID TWO uses WPA-PSK• Assuming the AP Ethernet port is connected to Gig 0/7 port of the
switch.• Broadcasting both the SSIDs.
Check Points
Step 1>> Configure the SSID and Map it to respective VLANS..
Step 2 >> Assigning the Encryption to different SSIDs with respective VLANs.
Step 3 >> Configuring the sub interface for Dot11 radio 0/1 and Ethernet.
Step 4>> Verification.
Check Point
• Switchport configuration
interface GigabitEthernet0/7 description 1141 AP IOS switchport trunk encapsulation dot1q switchport trunk native vlan 10 switchport mode trunkend
END!!!
I really appreciate your feedback
RegardsSurendra