multiple choice quiz
TRANSCRIPT
![Page 1: Multiple Choice Quiz](https://reader036.vdocuments.us/reader036/viewer/2022081908/55cf96e3550346d0338e718e/html5/thumbnails/1.jpg)
Ngày 29 tháng 3 năm 2014 Multiple Choice Quiz
http://highered.mcgraw-hill.com/novella/MixQuizProcessingServlet 1/5
Multiple Choice Quiz(See related pages)
Results Reporter
Out of 34 questions, you answered 21 correctly, for a final grade of 62%.
21 correct (62%)
12 incorrect (35%)
1 unanswered (3%)
0 ungraded (0%)
Please answer all questions.
Your Results:
The correct answer for each question is indicated by a .
1 CORRECT Before data can be transmitted, they must be transformed to ________.
A)periodic signals
B)electromagnetic signals
C)aperiodic signals
D)low-frequency sine waves
2 CORRECT A periodic signal completes one cycle in 0.001 s. What is the frequency?
A)1 Hz
B)100 Hz
C)1 KHz
D)1 MHz
3 CORRECT In a frequency-domain plot, the horizontal axis measures the ________.
A)peak amplitude
B)frequency
C)phase
D)slope
4 CORRECT In a time-domain plot, the horizontal axis is a measure of ________.
A)signal amplitude
B)frequency
C)phase
D)time
5 CORRECT If the bandwidth of a signal is 5 KHz and the lowest frequency is 52 KHz, what is the highest frequency?
A)5 KHz
B)10 KHz
C)47 KHz
D)57 KHz
6 CORRECT What is the bandwidth of a signal that ranges from 1 MHz to 4 MHz?
Course-wide ContentGlossaryMessage Board
Chapter 3
QuizzesMultiple Choice Quiz
More ResourcesFlashcardsSelected SolutionsAnimations
Home > Chapter 3 > Multiple Choice Quiz
![Page 2: Multiple Choice Quiz](https://reader036.vdocuments.us/reader036/viewer/2022081908/55cf96e3550346d0338e718e/html5/thumbnails/2.jpg)
Ngày 29 tháng 3 năm 2014 Multiple Choice Quiz
http://highered.mcgraw-hill.com/novella/MixQuizProcessingServlet 2/5
A)4 MHz
B)1 KHz
C)3 MHz
D)none of the above
7 CORRECT As frequency increases, the period ________.
A)decreases
B)increases
C)remains the same
D)doubles
8 INCORRECT Given two sine waves A and B, if the frequency of A is twice that of B, then the period of B is ________ that of A.
A)one-half
B)twice
C)the same as
D)indeterminate from
9 CORRECT A sine wave is ________.
A)periodic and continuous
B)aperiodic and continuous
C)periodic and discrete
D)aperiodic and discrete
10 CORRECT If the maximum amplitude of a sine wave is 2 V, the minimum amplitude is ________ V.
A)2
B)1
C)-2
D)between -2 and 2
11 CORRECT A signal is measured at two different points. The power is P1 at the first point and P2 at the second point. The dB is 0. This means ________.
A)P2 is zero
B)P2 equals P1
C)P2 is much larger than P1
D)P2 is much smaller than P1
12 CORRECT ________ is a type of transmission impairment in which the signal loses strength due to the resistance of the transmission medium.
A)Attenuation
B)Distortion
C)Noise
D)Decibel
13 INCORRECT________ is a type of transmission impairment in which the signal loses strength due to the different propagation speeds of each frequency that makes upthe signal.
A)Attenuation
B)Distortion
C)Noise
D)Decibel
14 INCORRECT ________ is a type of transmission impairment in which an outside source such as crosstalk corrupts a signal.
A)Attenuation
B)Distortion
C)Noise
![Page 3: Multiple Choice Quiz](https://reader036.vdocuments.us/reader036/viewer/2022081908/55cf96e3550346d0338e718e/html5/thumbnails/3.jpg)
Ngày 29 tháng 3 năm 2014 Multiple Choice Quiz
http://highered.mcgraw-hill.com/novella/MixQuizProcessingServlet 3/5
D)Decibel
15 CORRECT When propagation speed is multiplied by propagation time, we get the ________.
A)throughput
B)wavelength of the signal
C)distortion factor
D)distance a signal or bit has traveled
16 CORRECT Data can be ________.
A)analog
B)digital
C)(a) or (b)
D)none of the above
17 CORRECT _______ data are continuous and take continuous values.
A)analog
B)digital
C)(a) or (b)
D)none of the above
18 CORRECT _______ data have discrete states and take discrete values.
A)Analog
B)Digital
C)(a) or (b)
D)None of the above
19 CORRECT Signals can be ________.
A)analog
B)digital
C)either (a) or (b)
D)neither (a) nor (b)
20 UNANSWERED _____ signals can have an infinite number of values in a range.
A)Analog
B)Digital
C)(a) or (b)
D)None of the above
21 CORRECT _______ signals can have only a limited number of values.
A)Analog
B)Digital
C)(a) or (b)
D)None of the above
22 CORRECT Frequency and period are ______.
A)inverse of each other
B)proportional to each other
C)the same
D)none of the above
23 INCORRECT ________is the rate of change with respect to time.
![Page 4: Multiple Choice Quiz](https://reader036.vdocuments.us/reader036/viewer/2022081908/55cf96e3550346d0338e718e/html5/thumbnails/4.jpg)
Ngày 29 tháng 3 năm 2014 Multiple Choice Quiz
http://highered.mcgraw-hill.com/novella/MixQuizProcessingServlet 4/5
A)Amplitude
B)Time
C)Frequency
D)Voltage
24 CORRECT _______ describes the position of the waveform relative to time 0.
A)Frequency
B)Phase
C)Amplitude
D)Voltage
25 CORRECT A sine wave in the ______ domain can be represented by one single spike in the _____ domain.
A)time; frequency
B)frequency; time
C)time; phase
D)phase; time
26 INCORRECT A _________ sine wave is not useful in data communications; we need to send a _______ signal.
A)composite; single-frequency
B)single-frequency; composite
C)single-frequency; double-frequency
D)none of the above
27 INCORRECT The _____ of a composite signal is the difference between the highest and the lowest frequencies contained in that signal.
A)frequency
B)period
C)bandwidth
D)amplitude
28 INCORRECT A(n)_________ signal is a composite analog signal with an infinite bandwidth.
A)digital
B)analog
C)either (a) or (b)
D)neither (a) nor (b)
29 INCORRECT Baseband transmission of a digital signal is possible only if we have a ____ channel.
A)low-pass
B)bandpass
C)low rate
D)high rate
30 INCORRECT If the available channel is a ____ channel, we cannot send a digital signal directly to the channel.
A)low-pass
B)bandpass
C)low rate
D)high rate
31 INCORRECT For a ______ channel, the Nyquist bit rate formula defines the theoretical maximum bit rate.
A)noisy
B)noiseless
C)bandpass
D)low-pass
![Page 5: Multiple Choice Quiz](https://reader036.vdocuments.us/reader036/viewer/2022081908/55cf96e3550346d0338e718e/html5/thumbnails/5.jpg)
Ngày 29 tháng 3 năm 2014 Multiple Choice Quiz
http://highered.mcgraw-hill.com/novella/MixQuizProcessingServlet 5/5
32 INCORRECTFor a ______ channel, we need to use the Shannon capacity to find the maximum bit rate.
A)noisy
B)noiseless
C)bandpass
D)low-pass
33 CORRECT _________ can impair a signal.
A)Attenuation
B)Distortion
C)Noise
D)All of the above
34 INCORRECT The _________ product defines the number of bits that can fill the link.
A)bandwidth-period
B)frequency-amplitude
C)bandwidth-delay
D)delay-amplitude
Routing Information
Date: Fri Mar 28 13:05:16 EDT 2014
My name:
Section ID:
Email these results to:
Email address: Format:
Me: HTML
My Instructor: HTML
My TA: HTML
Other: HTML
E-Mail The Results
To learn more about the book this website supports, please visit its Information Center.
2007 McGraw-Hill Higher EducationAny use is subject to the Terms of Use and Privacy Notice.
McGraw-Hill Higher Education is one of the many fine businesses of The McGraw-Hill Companies.