multi view integration smart-play integration with multi
TRANSCRIPT
ACPMB-45Smart-Play Integration with Multi Camera Inputs
for Select Mercedes Benz Vehicles with NTG4.5 / NTG4.7 System
R
INTERFACING SOLUTIONS
SightlineMulti View Integration
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev. 0428201 of 8
- Smart-Play Integration system allows connection of Android and other smartphones to the Mercedes Benz NTG4.5 and NTG4.7 infotainment systems.
- Made for Android Auto and CarPlay.- Adds front and rear aftermarket camera inputs. - Retains functionality of the OEM backup camera if present.- Front camera automatically shows on the screen after changing the gear from reverse to drive.
PRODUCT FEATURES:
ACPMB-45 Module Vehicle Harnesses Smart-Play Interface Module
Video Harness LVDS In/Out Cable
4K HDMI Cable Microphone OSD Controller
3.5mm Aux Cable Smart-Play Module Power Harness
PARTS INCLUDED:
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev. 0428202 of 8
WIRING DIAGRAM:
R
INTERFACING SOLUTIONS
SightlineMulti View Integration
MAIN
ACPMB-45Smart-Play / Android Auto Integrationfor Mercedes Benz with NTG4.5 System
R
INTERFACING SOLUTIONS
V IDEO
REAR CAMERA
FRONT CAMERA
Front Camera Manual Trigger
Front Camera
12V Power & Ground
Rear Camera
12V Power & Ground
Rear Camera Manual Trigger
OSDCONTROL
PAD
OSD Control Pad is used toadjust the settings. Must be
unplugged and stored after use.
LVDSAdapter
Cable
Red
Red
Black
Black
Multi/IOHDMI
Smart-Play Module
R
INTERFACING SOLUTIONS
HDMI
Power Port+12V ACC (Red)GND (Black)
Aux CableTo factoryAux Input
Microphone
OEM SmartphoneCable
To SmartphoneUSB Extension
Cable
To CigaretteLighter Wires
Blue
Green
LVDS VideoExtension Board
To Radio
From RadioLVDS Cable
TO FACTORYRADIO
FROM FACTORYRADIO
FIBER OPTICCABLE
ACPMB-45Smart-Play Integration with Multi Camera Inputs
for Select Mercedes Benz Vehicles with NTG4.5 / NTG4.7 System
DIP SWITCH SETTINGS:
Note: ON is down and OFF is up
DIP SETTING SCREEN SIZE VEHICLE1 to 8 ALL OFF 7” All Classes
1 ON 5.8” C, CLS, E, GL, GLK, ML, SLK2 ON 5.8” A, B, CLA, GLA, G
NOTE: Turn off FPG and PDC function on 5.8” screens.
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev. 0428203 of 8
R
INTERFACING SOLUTIONS
SightlineMulti View Integration
ACPMB-45Smart-Play Integration with Multi Camera Inputs
for Select Mercedes Benz Vehicles with NTG4.5 / NTG4.7 System
INSTALLATION INSTRUCTIONS:
1. Use a pry tool to remove dash trim.
2. Carefully pull out the dash trim. It is held in place by multiple clips.
3. Unplug the connector on the dash trim.
4. Remove the 2 Torx screws holding the radio.
5. Pull out the radio. 6. Unplug the factory Quadlock connector.
7. Remove the fiber optic cable from the factory Quadlock connector. (if applicable)
8. Plug the fiber optic cable to the same location on the ACPMB-45 Quadlock T-harness.
9. Plug the factory Quadlock connector to the mating connector on the ACPMB-45 T-harness.
10. Plug the ACPMB-45 Quadlock connector to the radio.
11. Unplug the gray LVDS connector behind the radio.
12. Plug the gray LVDS connector to the ACPMB-45 LVDS Video Cable.
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.0428204 of 8
R
INTERFACING SOLUTIONS
SightlineMulti View Integration
ACPMB-45Smart-Play Integration with Multi Camera Inputs
for Select Mercedes Benz Vehicles with NTG4.5 / NTG4.7 System
13. Plug the ACPMB-45 LVDS Video cable connector to the radio.
14. Install the front and rear cameras (if applicable) and power using the power wires provided.
15. Tap the Smart-Play module power wires to the cigarette lighter wires
16. Plug in the 4K HDMI cable provided with the kit to the Smart-Play module.
17. Plug the 2 pin power wire connector to the Smart-Play module.
18. Plug the other end of the 4K HDMI cable to the ACPMB-45 module HDMI port.
19. Plug in the USB extension cable to the Smart-Play module.
20. Run the other end of the USB extension cable to an accessible location.
21. Plug one end of the Aux cable to the Smart-Play module and other end to the factory AUX port.
Line Out (Aux) HDMI Power Port USB Mic In
Rotate and push the Comand knob for Smart-Play navigation.
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev. 0428204 of 8
R
INTERFACING SOLUTIONS
SightlineMulti View Integration
ACPMB-45Smart-Play Integration with Multi Camera Inputs
for Select Mercedes Benz Vehicles with NTG4.5 / NTG4.7 System
To enter and exit the Smart-Play mode, press the back button on the steering wheel controls for 3 seconds.
OPERATION:
OSD Control Pad
The OSD Setting Screen automatically pops up when the OSD Control Pad is connected.
ON SCREEN DISPLAY (OSD) SETTINGS:
Use the OSD menu to make the necessary settings. Remember to Run Save&Reboot after the settings are made. Unplug the OSD Control Pad after setting the cameras and keep it in a secure location in case it is needed to change the settings.
UP
DOWN
LEFT RIGHT
ENTER
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev. 0428206 of 8
R
INTERFACING SOLUTIONS
SightlineMulti View Integration
ACPMB-45Smart-Play Integration with Multi Camera Inputs
for Select Mercedes Benz Vehicles with NTG4.5 / NTG4.7 System
SMART-PLAY SETTING
After plugging in the OSD controller, navigate down to LVDS Input and set to ON. Push RIGHT button to go to the next menu.
Set Navi Brand to NV17 Navigate the OSD back the main menu and go to Save&Reboot then Run.
REAR AND FRONT CAMERA SETTING
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev. 0428207 of 8
R
INTERFACING SOLUTIONS
SightlineMulti View Integration
ACPMB-45Smart-Play Integration with Multi Camera Inputs
for Select Mercedes Benz Vehicles with NTG4.5 / NTG4.7 System
Dynamic Parking Guide Lines
To turn ON the Dynamic Parking Guide Lines, go the Rear Input > Rear Set and turn ON Warning LANG. Go back to the root menu and Run Save&Reboot. Remember to unplug the OSD Control Pad otherwise the unit will not function properly. Set the parking brake on, start the car, put the gear in reverse, turn the steering wheel all the way to the left and all the way to right then put it in the center. The ACPMB-45 will calibrate automatically.
FRONT CAMERA SETTING
The front Camera will automatically show on the screen when the gear is put to Drive from Reverse. Set the delay time on the OSD menu. Delay time can be set from 1 to 60 seconds after a putting the car to drive from reverse.
Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev. 0428208 of 8
R
INTERFACING SOLUTIONS
SightlineMulti View Integration
ACPMB-45Smart-Play Integration with Multi Camera Inputs
for Select Mercedes Benz Vehicles with NTG4.5 / NTG4.7 System
VEHICLE APPLICATIONS:
Mercedes Benz2013 - 20152013 - 20162012 - 20162013 - 20142012 - 20162012 - 2016 2013 - 2016
A-class (W176)B-class (W246)C-class (W204 / C204)CLA 250 (late 2014)CLS (W218)E-class (W212 / C207)G (W463)
2013 - 20162014 - 20162011 - 20162012 - 20162013 - 20162012 - 2016
GL (X166)GLA (X156)GLK (W204)ML (W166)SL (R231)SLK (R172)
2014 C250 with NTG4.5 System