multi point lock trim - emtekassa abloy, the global leader in door opening solutions multi point...

ASSA ABLOY, the global leader in door opening solutions

MULTI POINT LOCK TRIMPRICE BOOKOctober 2018

BX4-3PTPRICEBK2019OCTOBER 2018

EMTEK Products, Inc.15250 E. Stafford Street

City of Industry • CA 91744Tel: 800-356-2741 • 626-961-0413Fax: 800-577-5771 • 626-336-2812

emtek.com

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience

2019_Emtek_Multi_Point_Price_Book_Cover_ps_072718.indd 1-2 7/27/18 10:04 AM

Large Multi Point Entry SetsAmerican Cylinder Hub Above/Below Handle, 35⁄8” Center-to-Center

ref. G-U®

Large Multi Point Entry SetsEuro Cylinder Hub Below Handle, 35⁄8” Center-to-Center

ref. G-U®

PAGE

14

18

TABL

E OF C

ONTE

NTS

(92mm)3-5/8”

4-1/2"

4-1/2"

3-5/8”

4-1/2"

4-1/2"

(92mm)

Large Multi Point Entry Sets

3-5/8”

4-1/2"

4-1/2"

(92mm)

Subject to the terms and conditions of this warranty, Emtek Products, Inc. (“Company”) extends a lifetime limited warranty* to the

original consumer user (“Original User”) of our product (“Product”) against defects in material and workmanship, as long as the Original User

occupies the residential premises upon which the Product was originally installed.

*Electronic components warranted TWO (2) YEARS

This warranty only applies to the Original User of the Products. This warranty is not transferable. This warranty applies to all products sold on

or after April 2, 2012.

Original User: The Original User will return the defective Product to the retailer from whom it was purchased, accompanied by a statement

of defects and proof of purchase.

What Emtek will do: Upon return of the defective Product to Emtek for inspection, free and clear of all liens and encumbrances and

accompanied by the statement of defects and proof of purchase, Emtek’s sole obligation, at its option, is to either repair or replace the Product,

or refund the original retailer purchase price in exchange for the Product.

THE COMPANY MAKES NO OTHER WARRANTY OTHER THAN AS EXPRESSLY STATED HEREIN, AND ALL IMPLIED WARRANTIES,

INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXCLUDED.

THE COMPANY’S MAXIMUM LIABILITY HEREUNDER IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. IN NO EVENT SHALL THE

COMPANY BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL OR SPECIAL AND/OR PUNITIVE DAMAGES OF ANY NATURE

ARISING FROM THE SALE OR USE OF THE PRODUCT, WHETHER BASED ON CONTRACT, WARRANTY, TORT, STRICT LIABILITY, PATENT

INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some local laws do not allow the exclusion

or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specific

legal rights and a buyer may also have other rights which may vary from state to state.

WHAT IS NOT COVERED: THE FOLLOWING COSTS, EXPENSES AND DAMAGES ARE NOT COVERED BY THE PROVISIONS OF THIS LIMITED

WARRANTY: (I) LABOR COSTS INCLUDING, BUT NOT LIMITED TO, SUCH COSTS AS THE REMOVAL AND RE-INSTALLATION OF PRODUCT; AND (II)

SHIPPING AND FREIGHT EXPENSES REQUIRED TO RETURN PRODUCT TO EMTEK.

THE PROVISIONS OF THIS WARRANTY DO NOT APPLY TO PRODUCTS: (I) USED IN COMMERCIAL APPLICATIONS; (II) USED IN COMMON AREA

APPLICATIONS; (III) USED FOR PURPOSES FOR WHICH THEY ARE NOT DESIGNED OR INTENDED; (IV) WHICH HAVE BEEN SUBJECTED TO

ALTERATION, ABUSE, MISUSE, NEGLIGENCE OR ACCIDENT; (V) WHICH HAVE BEEN IMPROPERLY STORED, INSTALLED, MAINTAINED OR OPERATED;

(VI) WHICH HAVE BEEN USED IN VIOLATION OF WRITTEN INSTRUCTIONS PROVIDED BY EMTEK; (VII) WHICH HAVE BEEN SUBJECTED TO

IMPROPER TEMPERATURE, HUMIDITY OR OTHER ENVIRONMENTAL CONDITIONS; OR (VIII) WHICH, BASED ON EMTEK’S EXAMINATION, DO NOT

DISCLOSE TO EMTEK’S SATISFACTION NON-CONFORMANCE TO THE WARRANTY. Additionally, this warranty DOES NOT COVER scratches,

abrasions, or deterioration due to the use of paints, solvents or other chemicals.

Finish Warranty: Polished Brass-Lifetime and Polished Nickel-Lifetime finishes carry a lifetime limited finish warranty. There is no finish

warranty on Deep Burgundy, Flat Black Patina, Medium Bronze Patina, Polished White Bronze, Rust, Silver Patina, Tumbled White Bronze, and

Unlacquered Brass finishes. All other finishes carry a five year finish warranty.

Warranty claims: Please contact the retailer from whom the defective product was purchased. If assistance is needed, please contact Emtek

Customer Service at:

EMTEK Products, Inc.

15250 E. Stafford Street

City of Industry, CA 91744

Tel: (626) 961-0413

LIFETIME LIMITED WARRANTY

152854_JamesLItho_Cover.indd 2 7/26/18 2:04 PM

PAGE

EMTEK MULTI POINT LOCK TRIM FOR SWINGING DOORSCHOOSE TRIMSETS FROM DOOR & LOCK CONFIGURATIONS, AVAILABLE IN BOTH KEYED AND NON-KEYED FUNCTIONS

Door Configuration #1American Cylinder Hub Below Handle, 35⁄8” Center-to-Center

ref. Atrium®, G-U®, KML by Andersen®, Andersen®, Marvin Integrity®, Paddock Lockmaster™, Superior®

22

Door Configuration #2American Cylinder Hub Above Handle, 35⁄8” Center-to-Center

ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®

28


ref. Andersen®

34

To determine your Multi-Point Lock configuration:

1) Identify the manufacturer of your door and multi-point lock 2) Measure the center-to-center hole spacing between the lever and the cylinder 3) Check the lever position: is it above or below the cylinder? 4) Identify the type of cylinder used in the door: is it American or Euro Profile Cylinder?

> >

TABLE OF CONTENTS

Multi Point Lock Trim Price BookEffective October 1, 2018

Door Manufacturers listed under each configuration are for reference only and are subject to change. Some retrofitting may be necessary. Please carefully measure and identify your hardware using the diagrams and steps listed below.

2019_Emtek_MP_Price_Book.indb 3 7/25/18 7:18 PM

TABL

E OF C

ONTE

NTS

Product IndexOrder FormLifetime Limited Warranty

Door Configuration #6American Cylinder Hub Below Handle, 35⁄8” Center-to-Center

ref. Milgard®, Pella®

52

Door Configuration #7American Cylinder Hub Above Handle, 6” Center-to-Center

ref. Trillenium® (formerly W&F Manufacturing)

58

68

7071

Door Configuration #8American Cylinder Hub Above Handle, 51/4” Center-to-Center

ref. Neuma Doors®

63

8 7/8"

5 1/4"

1 5/8"

PAGE

Door Configuration #5Euro Profile Cylinder Below Handle, 35⁄8” Center-to-Center

ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®, Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®, Semco®, Sierra Pacific®, Signature®, Simpson®, Therma-Tru®, Vetter®, Willmar®, Windsor®, Weathershield®

46


ref. Ashland®, G-U®, Caradco®, JELD-WEN®, Jeldwen® Custom Collection (formerly Pozzi®), Marvin®, PGT®, Premium Collection (formerly Norco®), Weathershield®

40

4


FINISH OPTIONS

Brushed Stainless Steel (SS)

Unlacquered Brass (US3NL)

Tumbled White Bronze (TWB)

Flat Black Bronze Patina (FB)

Medium BronzePatina (MB)

Oil Rubbed Bronze (US10B)

Satin Nickel (US15)

Pewter (US15A)

Flat Black(US19)

Polished Chrome(US26)

Polished Brass - Lifetime (US3)

French Antique(US7)

Satin Brass (US4)

Bronze Patina is a living finish that will gracefully age, revealing the underlying bronze over time. Because of this characteristic, no finish warranty is offered on bronze patina products.

Unlacquered Brass (US3NL) is a custom, made-to-order finish. It is available with an upcharge, per item and requires an additional 2-3 day lead time. This living finish will gracefully age and evolve in appearance over time. Because of this characteristic, no finish warranty is offered on unlacquered brass products.

Brushed Stainless Steel carries a five-year finish warranty. All stainless steel will require some periodic cleaning to keep your hardware looking like new.

Polished Nickel - Lifetime (US14)

5


GENE

RAL I

NFOR

MAT

ION

6

ORDERING AND RETURNS

Placing OrdersYou have several options to place an order:• Email: [email protected]• Fax: 800-577-5771• Phone: 800-356-2741, Option 1• Mail: Emtek Products, Inc. 15250 E. Stafford Street City of Industry, CA 91744

Hours of OperationMonday – Friday: 5:00 AM - 5:00 PM Pacific Time.

Minimum Order RequirementsThere are no minimum order quantity requirements.

Payment Terms Net 30 Days on established credit.

Payment OptionsWe accept check, Visa, MasterCard, Discover, AMEX, and ACH.

Sales TaxSales tax will be charged unless a resale certificate has been provided.

PricesAll prices listed are in US funds. Our prices are subject to change without prior notice.

Returns • For your convenience, returns do not require authorization. Returns can be processed directly from the Emtek website, www.emtek.com. • Click on the “Dealer Site” icon on the right side of the bottom half of the www.emtek.com home page, and then select “Product Returns”. Fill out the RGA form, and follow the link to generate a UPS call tag (terms and conditions apply – see the website for details). • A completed RGA form must accompany all packages for returned goods. • Returns are accepted from the Emtek dealer who originally purchased the product that is being returned. Any refund or credit would only be made to the original dealer.• All returned goods are subject to a minimum 25% restocking fee. • Returns for reasons other than an Emtek factory or processing error will be subject to our customary restocking fee with a return freight charge of $15.00 per label/carton in the United States or $30.00 per label/carton in Canada or Mexico. This charge will be deducted from the credit issued for each call tag. • No freight will be charged if the return is sent prepaid.

SHIPPING AND FREIGHT

Shipping CostsAll orders are FOB shipping point. For shipments to dealer specifiedcommercial addresses located in the US, Canada and Mexico, Emtek shipsfreight prepaid. For shipments to dealers located outside of NorthAmerica, freight will be prepaid by Emtek to the U.S. location of thedealer’s freight forwarder. Orders may ship ground service or LTL at ourdiscretion. Orders shipping to a residential address must shipvia 2nd Day with a 20% surcharge.

Shipping OptionsShipments to a commercial address can be upgraded to 2nd Day or NextDay Service for a fee. Orders shipping to a residential address may be upgraded to Next Day Service for a fee. Unfortunately, a dealer’s freight account cannot be used to pay for shipping charges.

Order Lead time Emtek assembles all products to order in City of Industry, California. Orders typically ship within two to three business days once an order is released to the factory.

DEALER INFORMATION PORTAL

Online Account AccessWe are pleased to announce that you can now access your Emtek account information through the ASSA ABLOY dealer information portal. Through the dealer portal you can access information about your account at any time. You can:

• Check on the status of orders• View both order and sales history• View and print order acknowledgements, invoices, statements and credits• Track shipments

To register for the ASSA ABLOY dealer portal or to make changes to access rights, we require the approval from your company’s owner, CEO, President, or other corporate officer. To get started, Click on the “Dealer Site” icon on the bottom half of the www.emtek.com home page, and then select “Forms & Instructions”. Please complete the “Dealer Portal Access Rights Form” and email to: [email protected]. Should you have any questions, please contact Customer Service.

Delivery Location Type of Service Surcharge %*

Commercial Address Second Day 6%

Commercial Address Next Day 16%

Residential Address Second Day (Required) 20%

Residential Address Next Day 25%

*Multiplied by invoice value


GENERAL INFORMATION

7

NO CHARGE SAMPLE PROGRAM

Sample ProgramSamples are gladly provided at no charge to authorized dealers, under the following conditions:

• ½ Door Lock Dummy (max 2)• ½ Pair of Hinges (max 2)• Cabinet Knob or Pull (max 3)• Door Accessory (max 1)

A shipping and handling fee of $2.50 per sample will be applied to your order ($2.50 for one sample, $5.00 for two samples, $7.50 for three samples, etc.)

Sample Order Exceptions• Samples must be different product codes.• Samples do not include active door hardware sets, 8” or larger cabinet pulls, door pulls, appliance pulls, electronic locks, entry sets, bath hardware or door accessories over $75 list.

Placing a Sample Order • Send orders to [email protected] or place by fax, phone, or mail. • Write “NO CHARGE SAMPLE” on the order.• Standard shipment upgrade charges will apply for expedited freight requests. • Orders for sample products must be placed separately and not combined with other products.• Emtek does not require samples to be returned.

No Restocking Fee Charged for Sample Orders with Exceptions• Send orders to [email protected] or place by fax, phone, or mail. • Write “DEALER SAMPLE” on the order.• Keep the samples you want and return the samples you don’t.• Contact Customer Service for Return Authorization in advance to ensure a restock fee is not applied to the return.• Product must be returned in its original condition. • Return freight charge of $15.00 per label/carton in the United States or $30.00 per label/carton in Canada or Mexico. This charge will be deducted from the credit issued for each call tag. • No freight will be charged if the return is sent prepaid.

NO CHARGE DISPLAY PROGRAM

Display ProgramEmtek offers a variety of quality, well-crafted displays. We take great pride in the quality of our displays, which are hand-built in our Southern California facility by our talented craftsmen.

• Click on the “Dealer Site” icon on the right side of the bottom half of the www.emtek.com home page, and then select “Displays”. • Browse our online catalog using the navigation system on the left column to view by function, style, or material.

Placing a Display OrderPlease contact your local sales representative for ordering information.

Product for use on Displays in your ShowroomThank you for considering Emtek products for use on door displays and kitchen/bath vignettes installed in your showroom. Please contact your local sales representative for ordering information.

Minimum Advertised Price PolicyEffective February 6, 2017

Emtek has determined that in order to better compete against existing competitors it must exercise a greater degree of control over the distribution of its products. Therefore, all sales of Emtek products will be subject to this Policy. This Policy has been unilaterally adopted and will be enforced strictly and uniformly.

Although resellers remain free to establish their own resale prices, to the extent that any customer elects to advertise products of Emtek in any manner, that is in print, in electronic media, on its website, etc., and provides price information for such products, that price information must be no less than List Price less 20%, this is the Minimum Advertised Price (MAP). Advertisements and offers to sell that do not include a particular price, but require further action that implies a price that is lower than the Minimum Advertised Price violate the MAP Policy. Examples of such unauthorized advertisements include “drop in cart” pricing, “add to cart” pricing, “click to see” pricing, and discount coupon pricing. Also prohibited are advertisements that indicate that discounts may be available when a customer takes specific action that goes beyond buying the product, such as “special price option” or “name your price.”

To assure fair business practices, we will strictly enforce this policy. Violations of this MAP Policy will include termination of our business relationship with a customer. On the first offense there will be a written notice counseling any customer that disregards this policy. Any customer who violates the policy a second time, within one year of receiving a written notice of a first violation, will be terminated.

Emtek will not discuss any conditions of acceptance related to this Policy, as it is non-negotiable and will not be altered for any dealer. In addition, Emtek neither solicits, nor will it accept, any assurance of compliance with this Policy. Nothing in this Policy shall constitute an agreement between Emtek and any reseller that the reseller will comply with this Policy.


LEVE

R OP

TION

S

8

MODERN BRASS

SELECT BRASSD

ESIG

NER

Hercules Lever (HEC)

Hermes Lever (HER)

Basel Lever (BA)

Sion Lever (SIO)

Stuttgart Lever (STU)

Freestone Lever (FRL)*

Spencer Lever (SPN)

Geneva Lever (GV)*

Aireon Lever (A)

Argos Lever (AG)

Triton Lever (TRT)

Helios Lever (HLO)

Athena Lever (ATN)

Aston Lever (AST)

Mercury Lever (MC)

Luzern Lever (LU)

Breslin Lever (BRL)

Myles Lever (MYL)*

Poseidon Lever (POS)

Dumont Lever (DT)

L-Square Faceted(LS.FA)

L-Square Hammered(LS.HA)

L-Square Knurled(LS.KN)

L-Square Tribeca(LS.TR)

T-Bar Faceted(TA.FA)*

T-Bar Hammered(TA.HA)*

T-Bar Knurled(TA.KN)*

T-Bar Tribeca(TA.TR)*

CLA

SSIC

SOLID BRASS

Coventry Lever (CV)

Rope Lever (RL)

Cortina Lever (C)

Ribbon & Reed Lever (RBL)

Merrimack Lever (ME)

Turino Lever (T)

Elan Lever (EN)

Santa Fe Lever (SF)

Rustic Lever (R)

Milano Lever (M)

Wembley Lever (WM)

CLA

SSIC

DES

IGN

ER

ARTS & CRAFTS BRASS

Arts & Crafts Lever (AC)

Hammered Lever(HM)

* Note: You will need to ensure the necessary opening/closing clearance when using certain lever designs. Dimensions from the center of the stem to the end of the lever overhang have been provided: T-Bar 3/4”, Geneva 11/8”, Myles 3/4”, Freestone 1”, Yuma 11/8”.


LEVER OPTIONS

HANDING OF DOOR IS ALWAYS DETERMINED FROM THE OUTSIDE

Determining handing for door hardware is different than determining handing for carpentry (ordering and hanging doors). If you follow the standard carpentry rules for handing door hardware, instead of following the diagram below, there is good chance you may end up with a lock that is handed incorrectly. Please refer to the diagram below and if you have any questions, call Customer Service at (800) 356-2741, Option 1.

LEFT(LH)

IN-SWINGDOOR

OUT-SWINGDOOR

IN-SWINGDOOR

OUT-SWINGDOOR

LEFT(LH)

RIGHT(RH)

RIGHT(RH)

9

SANDCAST BRONZE

Cody Lever (CD)

Cimarron Lever (CR)

Durango Lever (D)

Lariat Lever (LR)

Aurora Lever (AR)

Bryce Lever (BR)

Montrose Lever (MT)

Teton Lever (TT)

Yuma Lever (YM)*

Mariposa Lever (MA)

LOST WAX CAST BRONZE

Medici Lever (MDI)

Napoli Lever (NA)

Octagon Lever (OCL)

Padua Lever (PD)

Kiel Lever(KL)

Poseidon Lever(PO)

Stuttgart Lever(STT)

Cologne Lever(CO)

Dresden Lever(DD)

Athena Lever(AT)

Hercules Lever (HS)

Helios Lever(HL)

Hermes Lever(HES)

STAINLESS STEEL


10

LEVE

R FI

NISH

AVA

ILAB

ILIT

Y CHA

RT

MODERN BRASS

SELECT BRASS

T-Bar Faceted(TA.FA)

L-Square Faceted(LS.FA)

T-Bar Hammered(TA.HA)

L-Square Hammered(LS.HA)

T-Bar Knurled(TA.KN)

L-Square Knurled(LS.KN)

T-Bar Tribeca(TA.TR)

L-Square Tribeca(LS.TR)

CLA

SSIC

DES

IGN

ER


Hermes Lever (HER)

Basel Lever (BA)

Sion Lever (SIO)


Freestone Lever (FRL)

Spencer Lever (SPN)

Geneva Lever (GV)

Aireon Lever (A)

Argos Lever (AG)

Triton Lever (TRT)

Helios Lever (HLO)

Athena Lever (ATN)

Aston Lever (AST)

Mercury Lever (MC)

Luzern Lever (LU)

Breslin Lever (BRL)

Myles Lever (MYL)


Dumont Lever (DT)

Coventry Lever (CV)

Rope Lever (RL)

Cortina Lever (C)



Turino Lever (T)

Elan Lever (EN)

Santa Fe Lever (SF)

Rustic Lever (R)

Milano Lever (M)

Wembley Lever (WM)

CLA

SSIC

DES

IGN

ER

SOLID BRASS

US4 US14LifetimeUS10B US15 US19 US26 US3NL*

ARTS & CRAFTS BRASS


Hammered Lever(HM)


11

LEVER FINISH AVAILABILITY CHART

L-Square Faceted (LS.FA)

T-Bar Faceted (TA.FA)

L-Square Hammered (LS.HA)

T-Bar Hammered (TA.HA)

L-Square Knurled (LS.KN)

T-Bar Knurled (TA.KN)

L-Square Tribeca (LS.TR)

T-Bar Tribeca (TA.TR)


Hammered Lever (HM)

Arts &Crafts

*Unlacquered Brass (US3NL) is a custom, made-to-order finish. It is available with an upcharge, per item and requires an additional 2-3 day lead time. This living finish will gracefully age and evolve in appearance over time. Because of this characteristic, no finish warranty is offered on unlacquered brass products.

Modern Classic

Brass Levers

Modern Designer

Brass Levers

SELECTBrass

Levers

Myles Lever (MYL)

Geneva Lever (GV)

Aston Lever (AST)

Triton Lever (TRT)

Mercury Lever (MC)

Freestone Lever (FRL)

Argos Lever (AG)


Luzern Lever (LU)

Dumont Lever (DT)

Aireon Lever (A)

Spencer Lever (SPN)

Hermes Lever (HER)

Breslin Lever (BRL)

Sion Lever (SIO)


Basel Lever (BA)


Helios Lever (HLO)

Athena Lever (ATN)

US7US4US3Lifetime

US14LifetimeUS10B US15 US15A US19 US26 US3NL*

Cortina Lever (C)


Rustic Lever (R)

Santa Fe Lever (SF)

Coventry Lever (CV)

Milano Lever (M)

Rope Lever (RL)

Turino Lever (T)

Wembley Lever (WM)

Elan Lever (EN)


ClassicBrass

Levers

DesignerBrass

Levers


12

LEVE

R FI

NISH

AVA

ILAB

ILIT

Y CHA

RT

SANDCAST BRONZE

LOST WAX CAST BRONZE

Medici Lever (MDI)

Napoli Lever (NA)

Octagon Lever (OCL)

Padua Lever (PD)

MB*FB* TWB*

Cologne Lever(CO)

Stuttgart Lever(STT)

Kiel Lever(KL)

Dresden Lever(DD)

Poseidon Lever(PO)

Athena Lever(AT)

Hercules Lever (HS)

Helios Lever(HL)

Hermes Lever(HES)

STAINLESS STEEL

SS**

Cody Lever (CD)

Cimarron Lever (CR)

Durango Lever (D)

Lariat Lever (LR)

Montrose Lever (MT)

Teton Lever (TT)

Yuma Lever (YM)

Aurora Lever (AR)

Bryce Lever (BR)

Mariposa Lever (MA)


13

LEVER FINISH AVAILABILITY CHART

FB* MB* TWB*

Mariposa Lever (MA)

*Bronze Patina is a living finish that will gracefully age, revealing the underlying bronze over time. Because of this characteristic, no finish warranty is offered on bronze patina products.

**Brushed Stainless Steel carries a five-year finish warranty. All stainless steel will require some periodic cleaning to keep your hardware looking like new.

Aurora Lever (AR)

Lariat Lever (LR)

Montrose Lever (MT)

Cimarron Lever (CR)

Bryce Lever (BR)

Cody Lever (CD)

Teton Lever (TT)

Durango Lever (D)

Yuma Lever (YM)

Sandcast Bronze Levers

Lost Wax CastBronze Levers

FB* MB*

Medici Lever (MDI)

Napoli Lever (NA)

Octagon Lever (OCL)

Padua Lever (PD)

Helios Lever (HL)

Poseidon Lever (PO)

Stuttgart Lever (STT)

Athena Lever (AT)

Hercules Lever (HS)

Cologne Lever (CO)

Hermes Lever (HES)

Dresden Lever (DD)

Kiel Lever (KL)

Stainless SteelLevers

SS**


14 To order: (W) Product Code + Lever Style + Handing + Finish Code

LARGE MULTI POINT ENTRY SETSAmerican Cylinder Hub, Above / Below Handle35⁄8” Center to Center

23/8” Minimum Backset Required

Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Weiser®(WR5) Keyway• Specify by adding "W" to the beginning of Product Code. • No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminates sagging handles.

minimum backset

3-5/8”

4-1/2"

4-1/2"

2-3/8”

(92mm)

FinishProduct Code Lever Style (LH/RH) List Price

Sets with 2.5” x 17.5” Plates

BRASS PLATES, MODERN RECTANGULAR STYLE

See Page 8 for Brass & Modern Brass Lever Options.

Satin Brass (US4)Oil Rubbed Bronze (US10B)Polished Nickel - Lifetime (US14)Satin Nickel (US15)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*

$364.00

$364.00

$364.00

$364.00

1LR1

1LR2

1LR3

1LR4

Keyed with American Cylinder, Hub ABOVE Handle (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)

Dummy Pair

Keyed with American Cylinder, Hub BELOW Handle (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable)

Dummy Pair

Modern RectangularAmerican Cylinder Below Handle21⁄2” x 171⁄2” Keyed

Modern RectangularAmerican Cylinder Above Handle21⁄2” x 171⁄2” Keyed

*Unlacquered Brass (US3NL) finish available for a $50 List Price upcharge per item.


15emtek.com 800.356.2741

Ref. G-U® LARGE MULTI POINT ENTRY SETS



minimum backset

3-5/8”

4-1/2"

4-1/2"

2-3/8”

(92mm)



BRASS PLATES, MELROSE STYLE


Polished Brass - Lifetime (US3)French Antique (US7)Oil Rubbed Bronze (US10B)Polished Nickel - Lifetime (US14)Satin Nickel (US15)Pewter (US15A)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*

$364.00

$364.00

$364.00

$364.00

1LM1

1LM2

1LM3

1LM4


Dummy Pair


Dummy Pair

Brass MelroseAmerican Cylinder Above Handle27/8” x 171⁄2” Keyed

Brass MelroseAmerican Cylinder Below Handle27/8” x 171⁄2” Keyed




LARGE MULTI POINT ENTRY SETSAmerican Cylinder Hub, Above / Below Handle35⁄8” Center to Center





minimum backset

3-5/8”

4-1/2"

4-1/2"

2-3/8”

(92mm)

1LA1

1LA2

1LA3

1LA4


Sets with 3” x 17.5” Plates

SANDCAST BRONZE PLATES, ARCHED STYLE

See Page 9 for Sandcast Bronze Lever Options.

Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB) $468.00

$468.00

$468.00

$468.00


Dummy Pair


Dummy Pair

Sandcast Bronze Arched American Cylinder Above Handle3” x 171⁄2” Keyed

Sandcast Bronze Arched American Cylinder Below Handle3” x 171⁄2” Dummy


minimum backset

3-5/8”

4-1/2"

4-1/2"

2-3/8”

(92mm)

17emtek.com 800.356.2741

Specification Sheet for Trim and Cylinder Styles LARGE MULTI POINT ENTRY SETS

Steel Spindle

Rosette Screws

Cylinder Tailpiece

CONSTRUCTION KEYING

Charge for Construction Keying - $3.00 (NET)• Locks that are both construction keyed and keyed alike in a house group will be charged a total of $5.00 (NET) per cylinder.

Charge for Re-Keying - $2.00 (NET) per Cylinder• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.

Keying to Code• Order by indicating “Key Code XXXXX “ next to applicable locks.

Keying Alike• Order by indicating “Keyed Alike” next to applicable locks if only one keyed alike group is wanted.• If ordering multiple groups (houses) indicate “Keyed Alike House #_” next to applicable locks.

- Construction devices used on one or more of last four positions.

- Dimples drilled in plug in this position.

• Lost ball system. • Last four pin locations drilled for lost ball application. • Master key pins used for code variability. • Construction keys and owner keys sent separately. • Order by indicating “Construction Keyed, House #_” next to applicable locks.

Keyed Plates with American Cylinder

Standard Components:• Single Cylinder Tailpiece• 3 3/4” Steel Spindle• 2” Rosette Screws• 1 1/2” Rosette Screws for 1 5/8” thick door

Standard Components:• 2” Rosette Screws• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:• Long Single Cylinder Tailpiece• 4 1/2” Steel Spindle• 2 1/2” Rosette Screws• 2” Rosette Screws for 2” - 2 1/8” thick door

Extended Components:• 2 1/2” Rosette Screws• 2” Rosette Screws for 2” - 2 1/8” thick door

Dummy Plates

Standard Door Thickness: from 15/8” to 2”


Extended Door Thickness: Over 2” to 23/4”


01_Large_MP.indd 17 7/26/18 12:40 PM

18 To order: Product Code + Lever Style + Handing + Finish Code

LARGE MULTI POINT ENTRY SETSEuro Cylinder Hub, Below Handle35/8” Center to Center


Handing Required• Key codes may be specified. Fits standard door thickness of 13/4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.


Weiser® keyway not available with Euro cylinder.

(92mm)

minimum backset

3-5/8”

4-1/2"

4-1/2"

2-3/8”



BRASS PLATES, MODERN RECTANGULAR STYLE



Keyed with Euro Profile Cylinder , Hub BELOW Handle (Schlage® Keyway standard, Rekeyable)

Dummy Pair

$364.00

$364.00

2LR1

2LR2

Modern RectangularEuro Cylinder Below Handle21⁄2” x 171⁄2” Keyed

Modern RectangularEuro Cylinder Below Handle21⁄2” x 171⁄2” Dummy



19emtek.com 800.356.2741

Ref. G-U® LARGE MULTI POINT ENTRY SETS

Handing Required• Key codes may be specified. Fits standard door thickness of 13/4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included. Weiser® keyway not available with Euro cylinder.

(92mm)

minimum backset

3-5/8”

4-1/2"

4-1/2"

2-3/8”



BRASS PLATES, MELROSE STYLE


Polished Brass - Lifetime (US3)French Antique (US7)Oil Rubbed Bronze (US10B)Polished Nickel - Lifetime (US14)Satin Nickel (US15)Pewter (US15A)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*

Keyed with Euro Profile Cylinder , Hub BELOW Handle (Schlage® Keyway standard, Rekeyable)

Dummy Pair

$364.00

$364.00

2LM1

2LM2

Brass MelroseEuro Cylinder Below Handle27/8” x 171⁄2” Keyed



(92mm)

minimum backset

3-5/8”

4-1/2"

4-1/2"

2-3/8”


LARGE MULTI POINT ENTRY SETSEuro Cylinder Hub, Below Handle35/8” Center to Center




Weiser® keyway not available with Euro cylinder.


Sets with 3” x 17.5” Plates



Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB) Keyed with Euro Profile Cylinder , Hub BELOW Handle

(Schlage® Keyway standard, Rekeyable)

Dummy Pair

$468.00

$468.00

2LA1

2LA2

Sandcast Bronze Arched Euro Cylinder Below Handle3” x 171⁄2” Keyed


(92mm)

21emtek.com 800.356.2741

Specification Sheet for Trim and Cylinder Styles LARGE MULTI POINT ENTRY SETS

CUSTOM KEYINGCharge for Re-Keying - $2.00 (NET) per Cylinder• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.



Keyed Plates with Euro Profile Cylinder

Standard Components:• 2 9/16” Euro Profile Cylinder• 3 3/4” Steel Spindle• 1 1/2” Rosette Screws

Extended Components:• 3 5/32” Euro Profile Cylinder• 4 1/2” Steel Spindle• 2” Rosette Screws

Extended Components:• 3 17/32” Euro Profile Cylinder• 5” Steel Spindle• 3” Rosette Screws

Standard Door Thickness: from 15/8” to 2” Extended Door Thickness: Over 2” to 21/2” Extended Door Thickness: Over 21/2”to 23/4”

Steel Spindle

Rosette Screws

Full Euro Profile Cylinder

CylinderScrew

CY4-ERSGL35

CY4-ERSGL32

CY4-ERSGL25

Dummy Plates

Standard Components:• 2” Rosette Screws• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:• 2 1/2” Rosette Screws• 2” Rosette Screws for 2” - 2 1/8” thick door

Standard Door Thickness: from 15/8” to 2” Extended Door Thickness: Over 2” to 23/4”

minimum backset

3-5/8”

4-1/2"

4-1/2"

2-3/8”


DOOR CONFIGURATION #1

American Cylinder Hub Below Handle35⁄8” Center-to-Center

ref. Atrium®, G-U®, KML by Andersen®, Andersen® Marvin Integrity®, Paddock Lockmaster™, Superior®





Brass Concord11⁄2” x 11” Non-KeyedRustic Levers

Brass Concord2” x 10” KeyedCortina Levers


Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair

Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair

1171

1172117311741175

1181

1182118311841185

BRASS PLATES, CONCORD STYLE


Polished Brass - Lifetime (US3)French Antique (US7)Oil Rubbed Bronze (US10B)Satin Nickel (US15)Pewter (US15A)Flat Black (US19)Polished Chrome (US26)Unlacquered Brass (US3NL)*

$203.00





23emtek.com 800.356.2741

ref. Atrium®, G-U®, KML by Andersen®, Andersen®, Marvin Integrity®, Paddock Lockmaster™, Superior® DOOR CONFIGURATION #1

METRIC KNOB

TRAIL KNOB




11A1

11A211A311A411A5

11B1

11B211B311B411B5

BRASS PLATES, MODERN STYLE


$203.00

Brass Modern2” x 10” KeyedTriton Levers

Brass Modern11⁄2” x 11” Non-KeyedLuzern Levers

Stainless Steel2” x 10” KeyedDresden Levers

Stainless Steel11⁄2” x 11” Non-KeyedAthena Levers

METRIC KNOB

TRAIL KNOB




11A1

11A211A311A411A5

11B1

11B211B311B411B5

STAINLESS STEEL PLATES, MODERN STYLE

See Page 9 for Stainless Steel Lever Options.

Stainless Steel (SS) $203.00







ref. Atrium®, G-U®, KML by Andersen®, Andersen® Marvin Integrity®, Paddock Lockmaster™, Superior®







1111

1112111311141115

1121

1122112311241125



Flat Black Bronze (FB)Medium Bronze (MB)Tumbled White Bronze (TWB)

$226.00

Sandcast Arched11⁄2” x 11” Non-KeyedCimarron Levers

Sandcast Arched2” x 10” KeyedDurango Levers


25emtek.com 800.356.2741

ref. Atrium®, G-U®, KML by Andersen®, Andersen®, Marvin Integrity®, Paddock Lockmaster™, Superior® DOOR CONFIGURATION #1



Bronze Tuscany11⁄2” x 11” Non-KeyedOctagon Levers

Bronze Tuscany2” x 10” KeyedMedici Levers




1131

1132113311341135

1141

1142114311441145

LOST WAX CAST BRONZE PLATES, TUSCANY STYLE

See Page 9 for Lost Wax Cast Bronze Lever Options.

Flat Black Bronze (FB)Medium Bronze (MB)

$226.00




1151

1152115311541155

1161

1162116311641165

SANDCAST BRONZE PLATES, RECTANGULAR STYLE



$226.00

Sandcast Rectangular2” x 10” KeyedMontrose Levers

Sandcast Rectangular11⁄2” x 11” Non-KeyedCody Levers


26 Decorative Multi Point Lock Trim for Swinging Patio Doors

DOOR CONFIGURATION #1 Specification Sheet for Components and Door Thickness

Door Configuration # 1 American Cylinder Below Handle 3 5/8" Center-to-Center

Steel Spindle

Rosette Screws

Cylinder Tailpiece

Keyed Plates with American Cylinder Includes non-keyed thumbturn inside


Standard Components:• Thumbturn Tailpiece• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2” Rosette Screws• 1 1/2” Rosette Screws for 1 5/8” thick door


Extended Components:• Long Thumbturn Tailpiece• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2 1/2” Rosette Screws• 2” Rosette Screws for 2” - 2 1/8” thick door

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, and dummy (uses screws only)





CONSTRUCTION KEYING









27emtek.com 800.356.2741

Specification Sheet for Trim and Cylinder Styles DOOR CONFIGURATION #1

2” x 10” Plates, Product Codes 1121, 1141, 1161, 1181, 11B11 1⁄2” x 11” Plates, Product Codes 1111, 1131, 1151, 1171, 11A1


1 1⁄2” x 11” Plates, Product Codes 1113, 1133, 1153, 1173, 11A3 2” x 10” Plates, Product Codes 1123, 1143, 1163, 1183, 11B3



Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Atrium®, G-U®, KML by Andersen®, Andersen®, Marvin Integrity®, Paddock Lockmaster™, Superior®

Keyed with American Cylinder (for Active Door, Schlage® Keyway Standard, Weiser® Keyway Optional, Rekeyable)

Non-Keyed, Passage (for Semi-Active Door)

Non-Keyed, American Style Thumbturn Inside (for Active Door)

Non-Keyed, Fixed Handle Outside, Operating Handle Inside (for Semi-Active Door)

Dummy Pair (for Non-Active Door)

Fixed

Fixed Fixed Fixed

Fixed

Fixed





American Cylinder Hub Above Handle35/8” Center-to-Center




Handing required. Key codes may be specified. Fit standard door thickness of 13/4”, specify if different. Set includes Plates, Handles and Cylinders (where applicable).Weiser®(WR5) Keyway: Specify by adding "W" to the beginning of Product Code. No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

Brass Concord2” x 10” Non-KeyedSanta Fe Levers

Brass Concord11⁄2” x 11” Non-KeyedTurino Levers




1271

1272127312741275

1281

1282128312841285




$203.00





29emtek.com 800.356.2741

Handing required. Key codes may be specified. Fit standard door thickness of 13/4”, specify if different. Set includes Plates, Handles and Cylinders (where applicable).Weiser®(WR5) Keyway: Specify by adding "W" to the beginning of Product Code. No upcharge for cylinder substitution. Can be keyed into existing Weiser® system.

ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen® DOOR CONFIGURATION #2

Brass Modern11⁄2” x 11” Non-KeyedHelios Levers

Brass Modern2” x 10” Non-KeyedHercules Levers

Stainless Steel2” x 10” Non-KeyedHermes Levers

Stainless Steel11⁄2” x 11” KeyedPoseidon Levers


METRIC KNOB

TRAIL KNOB




12A1

12A212A312A412A5

12B1

12B212B312B412B5



$203.00

METRIC KNOB

TRAIL KNOB




12A1

12A212A312A412A5

12B1

12B212B312B412B5









American Cylinder Hub Above Handle35⁄8” Center-to-Center




Sandcast Arched2” x 10” KeyedTeton Levers

Sandcast Arched11⁄2” x 11” KeyedDurango Levers




1211

1212121312141215

1221

1222122312241225




$226.00




31emtek.com 800.356.2741

ref. BiltBest®, G-U®, Hurd® (Energy Saver), Andersen® DOOR CONFIGURATION #2


Sandcast Rectangular11⁄2” x 11” KeyedLariat Levers




1251

1252125312541255

1261

1262126312641265




$226.00

Bronze Tuscany11⁄2” x 11” Non-KeyedNapoli Levers

Bronze Tuscany2” x 10” Non-KeyedPadua Levers




1231

1232123312341235

1241

1242124312441245




$226.00




Door Configuration #2 American Cylinder Above Handle 3 5/8" Center-to-Center

Steel Spindle

Rosette Screws

Cylinder Tailpiece


CONSTRUCTION KEYING


















33emtek.com 800.356.2741


2” x 10” Plates, Product Codes 1221, 1241, 1261, 1281, 12B1



1 1⁄2” x 11” Plates, Product Codes 1215, 1235, 1255, 1275, 12A5






Fixed

Fixed Fixed

Fixed

Fixed Fixed







BiltBest®, G-U®, Hurd® (Energy Saver), Andersen®






ref. Andersen®



Brass Concord11⁄2” x 11” KeyedWembley Levers

Brass Concord2” x 10” Non-KeyedRope Levers


Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair

Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair

1371

137213731374

1375

1381

138213831384

1385




$203.00





35emtek.com 800.356.2741

ref. Andersen® DOOR CONFIGURATION #3Brass Modern11⁄2” x 11” KeyedAireon Levers

Brass Modern2” x 10” KeyedHelios Levers

Stainless Steel11⁄2” x 11” KeyedAthena Levers

Stainless Steel2” x 10” Non-KeyedDresden Levers

METRIC KNOB

TRAIL KNOB




13A1

13A213A313A413A5

13B1

13B213B313B413B5




$203.00

METRIC KNOB

TRAIL KNOB




13A1

13A213A313A413A5

13B1

13B213B313B413B5










ref. Andersen®






1311

1312131313141315

1321

1322

132313241325




$226.00

Sandcast Arched11⁄2” x 11” KeyedDurango Levers

Sandcast Arched2” x 10” Non-KeyedCody Levers


Bronze Tuscany2” x 10” Non-KeyedPadua Levers



37emtek.com 800.356.2741

ref. Andersen® DOOR CONFIGURATION #3

Bronze Tuscany11⁄2” x 11” KeyedMedici Levers




1331

1332133313341335

1341

1342134313441345




$226.00




1351

1352135313541355

1361

1362136313641365




$226.00








CONSTRUCTION KEYING








Steel Spindle

Rosette Screws

Cylinder TailpieceIncludes Configuration #3Special Mounting Hardware







Standard Components:• Configuration #3 Thumbturn Tailpiece• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2” Rosette Screws• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:• Single Cylinder Tailpiece• 4 1/2” Steel Spindle• 2 1/2” Rosette Screws• 2” Rosette Screws for 2” - 2 1/8” thick door

Extended Components:• Configuration #3 Thumbturn Tailpiece• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2 1/2” Rosette Screws• 2” Rosette Screws for 2” - 2 1/8” thick door



Fixed

Fixed Fixed Fixed Fixed

39emtek.com 800.356.2741











Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.Andersen®






Fixed




DOOR CONFIGURATION #4American Cylinder Hub Above Handle35⁄8” Center-to-Center

ref. Ashland®, G-U®, Caradco®, JELD-WEN® Jeldwen® Custom Collection (formerly Pozzi®) Marvin®, PGT®, Premium Collection (formerly Norco®) Weathershield®

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminatessagging handles.

See Configuration #1 for Marvin Integrity® Doors


Brass Concord11⁄2” x 11” KeyedCoventry Levers





1471

1472147314741475

1481

1482148314841485




$203.00





41emtek.com 800.356.2741

ref. Ashland®, G-U®, Caradco®, JELD-WEN®, Jeldwen® Custom Collection, Marvin®, PGT®, Premium Collection, Weathershield® DOOR CONFIGURATION #4

Brass Modern11⁄2” x 11” KeyedAireon Levers

Stainless Steel11⁄2” x 11” KeyedStuttgart Levers


Stainless Steel2” x 10” Non-KeyedHermes Levers

METRIC KNOB

TRAIL KNOB




14A1

14A214A314A414A5

14B1

14B214B314B414B5




$203.00

METRIC KNOB

TRAIL KNOB




14A1

14A214A314A414A5

14B1

14B214B314B414B5








DOOR CONFIGURATION #4American Cylinder Hub Above Handle35⁄8” Center-to-Center

ref. Ashland®, G-U®, Caradco®, JELD-WEN® Jeldwen® Custom Collection (formerly Pozzi®) Marvin®, PGT®, Premium Collection (formerly Norco®) Weathershield®

Each Multi Point Lock Trim now includes the Spring Assist function which returns the lever to the neutral position and eliminatessagging handles.

See Configuration #1 for Marvin Integrity® Doors


Sandcast Arched11⁄2” x 11” KeyedMontrose Levers





1411

1412141314141415

1421

1422142314241425




$226.00


Sandcast Rectangular2” x 10” KeyedTeton Levers



43emtek.com 800.356.2741

ref. Ashland®, G-U®, Caradco®, JELD-WEN®, Jeldwen® Custom Collection, Marvin®, PGT®, Premium Collection, Weathershield® DOOR CONFIGURATION #4

Bronze Tuscany11⁄2” x 11” Non-KeyedNapoli Levers

Bronze Tuscany2” x 10” KeyedNapoli Levers





1431

1432143314341435

1441

1442144314441445




$226.00




1451

1452145314541455

1461

1462146314641465




$226.00





Steel Spindle

Rosette Screws

Cylinder Tailpiece

CONSTRUCTION KEYING














Standard Components:• Single Cylinder Tailpiece• 3 3/4” Steel Spindle• 2” Rosette Screws for 1 5/8” - 1 3/4” thick door• 2 1/2” Rosette Screws for 1 3/4” - 2” thick door

Standard Components:• Thumbturn Tailpiece• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2” Rosette Screws for 1 5/8” - 1 3/4” thick door• 2 1/2” Rosette Screws for 1 3/4” - 2” thick door

Extended Components:• Long Single Cylinder Tailpiece• 4 1/2” Steel Spindle• 2 1/2” Rosette Screws 2” - 2 1/4” think door• 3” Rosette Screws for 2 1/4” - 2 3/4” thick door

Extended Components:• Long Thumbturn Tailpiece• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2 1/2” Rosette Screws 2” - 2 1/4” think door• 3” Rosette Screws for 2 1/4” - 2 3/4” thick door


45emtek.com 800.356.2741

Specification Sheet for Trim and Cylinder Styles DOOR CONFIGURATION #4Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.

Ashland®, G-U®, Caradco®, JELD-WEN®, Jeldwen® Custom Collection (formerly Pozzi®), Marvin®, PGT®, Premium Collection (formerly Norco®), Weathershield®















Fixed

Fixed Fixed Fixed

Fixed

Fixed


Handing Required• Key codes may be specified. Fits standard door thickness of 13⁄4”. Specify if thicker. • Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included. Weiser® keyway not available for Configuration 5, Euro cylinder.

DOOR CONFIGURATION #5Euro Profile Cylinder Below Handle35⁄8” Center-to-Center

ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®Semco®, Sierra Pacific®, Signature®, Simpson® Therma-Tru®, Vetter®, Willmar®, Windsor® Weathershield®



Brass Concord11⁄2” x 11” KeyedTurino Levers

Brass Concord2” x 10” KeyedRustic Levers


Sets with 11⁄2” x 11” Plates Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable) Non-Keyed Passage Non-Keyed Euro Profile Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair

Sets with 2” x 10” Plates Keyed with Euro Profile Cylinder (Schlage® Keyway standard, Rekeyable) Non-Keyed Passage Non-Keyed Euro Profile Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside Dummy Pair

1571

157215731574

1575

1581

1582158315841585




$203.00




47emtek.com 800.356.2741

DOOR CONFIGURATION #5ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®, Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®, Semco®Sierra Pacific®, Signature®, Simpson®, Therma-Tru®, Vetter®, Willmar®, Windsor®, Weathershield®

Brass Modern11⁄2” x 11” KeyedHermes Levers

Brass Modern2” x 10” KeyedTriton Levers

Stainless Steel2” x 10” Non-KeyedHercules Levers

Stainless Steel11⁄2” x 11” KeyedStuttgart Levers


METRIC KNOB

TRAIL KNOB




15A1

15A215A315A415A5

15B1

15B215B315B415B5



$203.00

METRIC KNOB

TRAIL KNOB




15A1

15A215A315A415A5

15B1

15B215B315B415B5







DOOR CONFIGURATION #5Euro Profile Cylinder Below Handle35⁄8” Center-to-Center

ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®Semco®, Sierra Pacific®, Signature®, Simpson® Therma-Tru®, Vetter®, Willmar®, Windsor® Weathershield®



Sandcast Arched11⁄2” x 11” KeyedLariat Levers





1511

1512151315141515

1521

1522152315241525




$226.00



49emtek.com 800.356.2741

DOOR CONFIGURATION #5ref. Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®, Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®, Semco®Sierra Pacific®, Signature®, Simpson®, Therma-Tru®, Vetter®, Willmar®, Windsor®, Weathershield®

Bronze Tuscany11⁄2” x 11” KeyedOctagon Levers

Sandcast Rectangular2” x 10” Non-KeyedMontrose Levers

Sandcast Rectangular11⁄2” x 11” KeyedTeton Levers

Bronze Tuscany2” x 10” KeyedPadua Levers




1531

1532153315341535

1541

154215431544

1545




$226.00




1551

1552155315541555

1561

1562156315641565




$226.00




Door Configuration #5 Euro Profile Cylinder Below Handle 3 5/8" Center-to-Center

CUSTOM KEYINGCharge for Re-Keying - $2.00 (NET) per Cylinder• Locks that are keyed to code or keyed alike in a house group will be charged $2.00 (NET) per cylinder.



Keyed Plates with Euro Profile Cylinder

Standard Components:• 2 9/16” Euro Profile Cylinder• 3 3/4” Steel Spindle• 1 1/2” Rosette Screws

Extended Components:• 3 5/32” Euro Profile Cylinder• 4 1/2” Steel Spindle• 2” Rosette Screws

Extended Components:• 3 17/32” Euro Profile Cylinder• 5” Steel Spindle• 3” Rosette Screws

Standard Door Thickness: from 15/8” to 2” Extended Door Thickness: Over 2” to 21⁄2” Extended Door Thickness: Over 21⁄2”to 23/4”

Standard Components:• 1 21/32” Euro Profile Half-Cylinder• 3 3/4” Steel Spindle• 1 1/2” Rosette Screws

Extended Components:• 1 31/32” Euro Profile Half-Cylinder• 4 1/2” Steel Spindle• 2” Rosette Screws

Extended Components:• 2 5/32” Euro Profile Half-Cylinder• 5” Steel Spindle• 3” Rosette Screws

Non-Keyed Plates with Euro Profile Half Cylinder

Standard Door Thickness: from 15/8” to 2” Extended Door Thickness: Over 2” to 21⁄2” Extended Door Thickness: Over 21⁄2”to 23/4”

Steel Spindle

Rosette Screws

Full Euro Profile Cylinder

CylinderScrew

Full Euro Profile Cylinder Half Euro Profile Cylinder

CY4-ERSGL35

CY4-ERSGL32

CY4-ERSGL25 CY4-ERHLF16TT

CY4-ERHLF19TT

CY4-ERHLF21TT


Standard Components:• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2” Rosette Screws• 1 1/2” Rosette Screws for 1 5/8” thick door

Extended Components:• 4 1/2” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 2 1/2” Rosette Screws• 2” Rosette Screws for 2” - 2 1/8” thick door

Standard Door Thickness: from 15/8” to 2” Extended Door Thickness: Over 2” to 23/4”


Fixed

Fixed Fixed

Fixed

Fixed Fixed

51emtek.com 800.356.2741










Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.Crestline®, Hoppe®, Hurd®, KFV®, Kolbe & Kolbe®, Lincoln®, Loewen®, Paddock Lockmaster™, Peachtree®,

Semco®, Sierra Pacific®, Signature®, Simpson®, Therma-Tru®, Vetter®, Willmar®, Windsor®, Weathershield®

Keyed with Euro Profile Cylinder (for Active Door, Schlage® Keyway Standard, Rekeyable)


Non-Keyed, Euro Profile Style Thumbturn Inside (for Active Door)











Brass Concord11⁄2” x 11” KeyedCortina Levers





1671

1672167316741675

1681

1682168316841685




$203.00





53emtek.com 800.356.2741

ref. Milgard®, Pella® DOOR CONFIGURATION #6Brass Modern11⁄2” x 11” Non-KeyedHercules Levers

Brass Modern2” x 10” Non-KeyedLuzern Levers



METRIC KNOB

TRAIL KNOB




16A1

16A216A316A416A5

16B1

16B216B316B416B5




$203.00

METRIC KNOB

TRAIL KNOB




16A1

16A216A316A416A5

16B1

16B216B316B416B5
















1611

1612161316141615

1621

1622162316241625




$226.00

Sandcast Arched11⁄2” x 11” Non-KeyedTeton Levers





55emtek.com 800.356.2741

ref. Milgard®, Pella® DOOR CONFIGURATION #6Sandcast Rectangular2” x 10” KeyedMontrose Levers

Sandcast Rectangular11⁄2” x 11” Non-KeyedLariat Levers

Bronze Tuscany11⁄2” x 11” KeyedOctagon Levers

Bronze Tuscany2” x 10” Non-KeyedNapoli Levers




1631

1632163316341635

1641

1642164316441645




$226.00




1651

1652165316541655

1661

1662166316641665




$226.00




Door Configuration #6 American Cylinder Below Handle 3 5/8" Center-to-Center

Steel Spindle

Rosette Screws

Cylinder Tailpiece


CONSTRUCTION KEYING


















Fixed Fixed

Fixed FixedFixedFixed

57emtek.com 800.356.2741










Set includes plates, handles and cylinders (where applicable). Multi Point lock mechanism is not included.Milgard®, Pella®










American Cylinder Hub Above Handle6” Center-to-Center




$203.00

Brass Modern2” x 10” KeyedPoseidon Levers


METRIC KNOB

TRAIL KNOB


Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable)

Non-Keyed American Style T-Turn Inside (Patio Function)

Dummy Pair

Non-Keyed American Style T-Turn Inside, Fixed Handles

17B1

17B3

17B5

17B6






59emtek.com 800.356.2741

ref. Trillenium® (formerly W&F Manufacturing) DOOR CONFIGURATION #7

Sandcast Rectangular2” x 10” Non-KeyedLariat Levers

Sandcast Rectangular2” x 10” KeyedLariat Levers

METRIC KNOB

TRAIL KNOB




Dummy Pair


1761

1763

1765

1766




$226.00

Stainless Steel2” x 10” KeyedStuttgart Levers


METRIC KNOB

TRAIL KNOB




Dummy Pair


17B1

17B3

17B5

17B6




Sandcast Arched2” x 10” KeyedMontrose Levers


METRIC KNOB

TRAIL KNOB




Dummy Pair


1721

1723

1725

1726




$226.00





American Cylinder Hub Above Handle6” Center-to-Center




Bronze Tuscany2” x 10” KeyedPadua Levers

Bronze Tuscany2” x 10” Non-KeyedNapoli Levers

METRIC KNOB

TRAIL KNOB




Dummy Pair


1741

1743

1745

1746




$226.00


61emtek.com 800.356.2741

ref. Trillenium® (formerly W&F Manufacturing) DOOR CONFIGURATION #7

Door Configuration #7 American Cylinder Above Handle 6" Center-to-Center

CONSTRUCTION KEYING








Steel Spindles(Half-Spindle)

Rosette Screws

Cylinder Tailpiece


Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in, & dummy (uses screws only)





Standard Components:• Single Cylinder Tailpiece• 2” Steel Spindles (Half-spindle)• 2” Rosette Screws for 1 5/8” - 1 3/4” thick door• 2 1/2” Rosette Screws for 1 3/4” - 2” thick door

Standard Components:• Thumbturn Tailpiece• 2” Steel Spindles (Half-spindle. No spindle for fixed handles)• 2” Rosette Screws for 1 5/8” - 1 3/4” thick door• 2 1/2” Rosette Screws for 1 3/4” - 2” thick door

Extended Components:• Long Single Cylinder Tailpiece• 2” Steel Spindles (Half-spindle)• 2 1/2” Rosette Screws 2” - 2 1/4” think door• 3” Rosette Screws for 2 1/4” - 2 3/4” thick door

Extended Components:• Long Thumbturn Tailpiece• 2” Steel Spindles (Half-spindle. No spindle for fixed handles)• 2 1/2” Rosette Screws 2” - 2 1/4” think door• 3” Rosette Screws for 2 1/4” - 2 3/4” thick door





Trillenium® (formerly W&F Manufacturing)


Non-Keyed, American Style T-Turn Inside (Active Door)


Non-Keyed, Fixed Handles, American Style T-Turn Inside (for Semi-Active Door)

2” x 10” Plates, Product Codes 1723, 1743, 1763, 17B3



2” x 10” Plates, Product Codes 1721, 1741,1761, 17B1


63emtek.com 800.356.2741




American Cylinder Hub Above Handle51/4” Center to Center

ref. Neuma Doors®


METRIC KNOB


Sets with 11⁄2” x 11” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside

Sets with 2” x 10” Plates Keyed with American Cylinder (Schlage® Keyway standard, Weiser® Keyway optional, Rekeyable) Non-Keyed Passage Non-Keyed American Style Thumbturn Inside Non-Keyed Fixed Handle Outside, Operating Handle Inside

18A1

18A218A318A4

18B1

18B218B318B4



$203.00


Stainless Steel2” x 10” KeyedDresden Levers

Stainless Steel (SS)

8 7/8"

5 1/4"

1 5/8"





American Cylinder Hub Above Handle51/4” Center to Center

ref. Neuma Doors®



8 7/8"

5 1/4"

1 5/8"




1851

185218531854

1861

186218631864



$226.00

Sandcast Rectangular2” x 10” KeyedTeton Levers

Sandcast Rectangular11⁄2” x 11” Non-KeyedLariat Levers







65emtek.com 800.356.2741

ref. Neuma Door® DOOR CONFIGURATION #8




1811

181218131814

1821

182218231824



$226.00

Sandcast Arched11⁄2” x 11” Non-KeyedCimarron Levers






1831

183218331834

1841

184218431844



$226.00

Bronze Tuscany11⁄2” x 11” Non-KeyedOctagon Levers

Bronze Tuscany2” x 10” KeyedMedici Levers





Door Configuration #8 American Cylinder Above Handle 5 1/4” Center to Center

Steel Spindle

Rosette Screws

Cylinder Tailpiece


Standard Components:• Single Cylinder Tailpiece• 3 3/4” Steel Spindle• 1 1/2” Rosette Screws

Standard Components:• Thumbturn Tailpiece• 3 3/4” Steel Spindle (half-spindle for fixed handle out/operating handle in)• 1 1/2” Rosette Screws

Non-Keyed Plates Includes non-keyed passage, fixed handle out/operating handle in

Standard Door Thickness: 13/4”

Standard Door Thickness: 13/4”

CONSTRUCTION KEYING





Construction devices used on one or more of last four positions.

Dimples drilled in plug in this position.


8 7/8"

5 1/4"

1 5/8"


67emtek.com 800.356.2741


FixedFixed


Neuma Doors®

2” x 10” Plates, Product Codes 1822, 1842, 1862, 18B21 1⁄2” x 11” Plates, Product Codes 1812, 1832, 1852, 18A2


1 1⁄2” x 11” Plates, Product Codes 1813, 1833, 1853, 18A3 2” x 10” Plates, Product Codes 1823, 1843, 1863, 18B3







11111112111311141115112111221123112411251131113211331134113511411142114311441145115111521153115411551161116211631164116511711172117311741175118111821183118411851211121212131214121512211222122312241225123112321233123412351241124212431244124512511252

12531254125512611262126312641265127112721273127412751281128212831284128513111312131313141315132113221323132413251331133213331334133513411342134313441345135113521353135413551361136213631364136513711372137313741375138113821383138413851411141214131414

14151421142214231424142514311432143314341435144114421443144414451451145214531454145514611462146314641465147114721473147414751481148214831484148515111512151315141515152115221523152415251531153215331534153515411542154315441545155115521553155415551561

15621563156415651571157215731574157515811582158315841585161116121613161416151621162216231624162516311632163316341635164116421643164416451651165216531654165516611662166316641665167116721673167416751681168216831684168517211723172517261741174317451746

176117631765176618111812181318141821182218231824183118321833183418411842184318441851185218531854186118621863186411A111A211A311A411A511B111B211B311B411B512A112A212A312A412A512B112B212B312B412B513A113A213A313A413A513B113B213B313B413B514A114A214A314A4

PRODUCTCODE

PRODUCTCODE

PRODUCTCODE

PRODUCTCODE

PRODUCTCODE

PRODUCTCODE

PAGE PAGE PAGE PAGE PAGE PAGE

PRODUCT INDEX

2424242424242424242425252525252525252525252525252525252525252222222222222222222230303030303030303030313131313131313131313131

3131313131313131282828282828282828283636363636363636363637373737373737373737373737373737373737373434343434343434343442424242

4242424242424343434343434343434343434343434343434343404040404040404040404848484848484848484849494949494949494949494949494949

4949494946464646464646464646545454545454545454545555555555555555555555555555555555555555525252525252525252525959595960606060

5959595965656565656565656565656565656565646464646464646423232323232323232323292929292929292929293535353535353535353541414141

14A514B114B214B314B414B515A115A215A315A415A515B115B215B315B415B516A116A216A316A416A516B116B216B316B416B517B117B317B517B618A118A218A318A418B118B218B318B41LA11LA21LA31LA41LM11LM21LM31LM41LR11LR21LR31LR42LA12LA22LM12LM22LR12LR2

414141414141474747474747474747475353535353535353535358,5958,5958,5958,596363636363636363161616161515151514141414202019191818


69

G-U® is a registered trademark of G-U Hardware, Inc. Paddock™ is a registered trademark of Yale® UK. Pella® is a registered trademark of Pella

Corporation. Sierra Pacific Windows® is a registered trademark of Sierra Pacific Industries. Superior® is a registered trademark of Superior

Engineered Products Corporation. Willmar® is a registered trademark of JELD-WEN of Canada Ltd. Andersen® is a registered trademark of

Andersen Corporation. Trillenium® is a registered trademark of Endura Products, Inc. Eagle® is a registered trademark of Eagle Window and

Door, Inc, BiltBest® is a registered trademark of BiltBest Windows and Patio Doors. Ashland® is a registered trademark of Ashland Products,

Inc. Caradco®, JELD-WEN, Norco® and Pozzi® are registered trademarks of JELD-WEN Inc., Oregon, USA. Integrity® and Marvin® are registered

trademarks of Marvin Windows and Doors. Milgard® is a registered trademark of Milgard Windows, Inc. Therma-Tru® is a registered trademark

of Therma-Tru Doors®. HOPPE® is a registered trademark of HOPPE North America, Inc. Hurd® is a registered trademark of Hurd Millwork

Company. Kolbe & Kolbe® is a registered trademark of Kolbe & Kolbe Millwork Company, Inc. Lincoln® is a registered trademark of Lincoln

Wood Products, Inc. Loewen® is a registered trademark of Loewen Windows. PGT® is a registered trademark of PGT Industries. Peachtree® and

Vetter® are registered trademark of The Peachtree Companies, Inc. Semco® is a registered trademark of Semling-Menke Co. Inc. Weathershield®

is a registered trademark of Weathershield Mfg. Inc. KML by Andersen® is a registered trademark of KML by Andersen. Atrium® is a registered

trademark of Atrium. KFV® is a registered trademark of KFV. Simpson® is a registered trademark of Simpson. Signature® is a registered

trademark of Signature. Crestline® is a registered trademark of Crestline. Windsor® is a registered trademark of Windsor. Neuma Doors® is a

registered trademark of Nan Ya Plastics Corporation. With the exception of Paddock™, none of the aforementioned companies are affiliated

with Emtek Products, Inc.

Door Manufacturers listed under each configuration are for reference only and are subject to change. Some retrofitting may be necessary. Please carefully measure and identify your hardware using the diagrams and steps listed on pages 2, 3 and 4.


Order Placed By Date

Billing Information

Company Name

Address

City State, Zip

Telephone

Shipping Address

EMTEK Products, Inc. 15250 E Sta�ord Street


Tel: 800-356-2741 626-961-0413

Fax: 800-577-5771 626-336-2812

www.emtek.com

Company Name

Address

City State, Zip

Telephone

QTY Finish PriceConfiguration Product Code Lever Style Handing(LH/RH)

Multi Point Lock Trim Order Form Acct#

PO# Note

Please Fax Order Form to (800) 577-5771or Email to [email protected]


Large Multi Point Entry SetsAmerican Cylinder Hub Above/Below Handle, 35⁄8” Center-to-Center

ref. G-U®

Large Multi Point Entry SetsEuro Cylinder Hub Below Handle, 35⁄8” Center-to-Center

ref. G-U®

PAGE

14

18

TABL

E OF C

ONTE

NTS

(92mm)3-5/8”

4-1/2"

4-1/2"

3-5/8”

4-1/2"

4-1/2"

(92mm)

Large Multi Point Entry Sets

3-5/8”

4-1/2"

4-1/2"

(92mm)

Subject to the terms and conditions of this warranty, Emtek Products, Inc. (“Company”) extends a lifetime limited warranty* to the

original consumer user (“Original User”) of our product (“Product”) against defects in material and workmanship, as long as the Original User

occupies the residential premises upon which the Product was originally installed.

*Electronic components warranted TWO (2) YEARS

This warranty only applies to the Original User of the Products. This warranty is not transferable. This warranty applies to all products sold on

or after April 2, 2012.

Original User: The Original User will return the defective Product to the retailer from whom it was purchased, accompanied by a statement

of defects and proof of purchase.

What Emtek will do: Upon return of the defective Product to Emtek for inspection, free and clear of all liens and encumbrances and

accompanied by the statement of defects and proof of purchase, Emtek’s sole obligation, at its option, is to either repair or replace the Product,

or refund the original retailer purchase price in exchange for the Product.

THE COMPANY MAKES NO OTHER WARRANTY OTHER THAN AS EXPRESSLY STATED HEREIN, AND ALL IMPLIED WARRANTIES,

INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXCLUDED.

THE COMPANY’S MAXIMUM LIABILITY HEREUNDER IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT. IN NO EVENT SHALL THE

COMPANY BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL OR SPECIAL AND/OR PUNITIVE DAMAGES OF ANY NATURE

ARISING FROM THE SALE OR USE OF THE PRODUCT, WHETHER BASED ON CONTRACT, WARRANTY, TORT, STRICT LIABILITY, PATENT

INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some local laws do not allow the exclusion

or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specific

legal rights and a buyer may also have other rights which may vary from state to state.

WHAT IS NOT COVERED: THE FOLLOWING COSTS, EXPENSES AND DAMAGES ARE NOT COVERED BY THE PROVISIONS OF THIS LIMITED

WARRANTY: (I) LABOR COSTS INCLUDING, BUT NOT LIMITED TO, SUCH COSTS AS THE REMOVAL AND RE-INSTALLATION OF PRODUCT; AND (II)

SHIPPING AND FREIGHT EXPENSES REQUIRED TO RETURN PRODUCT TO EMTEK.

THE PROVISIONS OF THIS WARRANTY DO NOT APPLY TO PRODUCTS: (I) USED IN COMMERCIAL APPLICATIONS; (II) USED IN COMMON AREA

APPLICATIONS; (III) USED FOR PURPOSES FOR WHICH THEY ARE NOT DESIGNED OR INTENDED; (IV) WHICH HAVE BEEN SUBJECTED TO

ALTERATION, ABUSE, MISUSE, NEGLIGENCE OR ACCIDENT; (V) WHICH HAVE BEEN IMPROPERLY STORED, INSTALLED, MAINTAINED OR OPERATED;

(VI) WHICH HAVE BEEN USED IN VIOLATION OF WRITTEN INSTRUCTIONS PROVIDED BY EMTEK; (VII) WHICH HAVE BEEN SUBJECTED TO

IMPROPER TEMPERATURE, HUMIDITY OR OTHER ENVIRONMENTAL CONDITIONS; OR (VIII) WHICH, BASED ON EMTEK’S EXAMINATION, DO NOT

DISCLOSE TO EMTEK’S SATISFACTION NON-CONFORMANCE TO THE WARRANTY. Additionally, this warranty DOES NOT COVER scratches,

abrasions, or deterioration due to the use of paints, solvents or other chemicals.

Finish Warranty: Polished Brass-Lifetime and Polished Nickel-Lifetime finishes carry a lifetime limited finish warranty. There is no finish

warranty on Deep Burgundy, Flat Black Patina, Medium Bronze Patina, Polished White Bronze, Rust, Silver Patina, Tumbled White Bronze, and

Unlacquered Brass finishes. All other finishes carry a five year finish warranty.

Warranty claims: Please contact the retailer from whom the defective product was purchased. If assistance is needed, please contact Emtek

Customer Service at:

EMTEK Products, Inc.

15250 E. Stafford Street


Tel: (626) 961-0413

LIFETIME LIMITED WARRANTY

152854_JamesLItho_Cover.indd 2 7/26/18 2:04 PM

ASSA ABLOY, the global leader in door opening solutions

MULTI POINT LOCK TRIMPRICE BOOKOctober 2018

BX4-3PTPRICEBK2019OCTOBER 2018

EMTEK Products, Inc.15250 E. Stafford Street

City of Industry • CA 91744Tel: 800-356-2741 • 626-961-0413Fax: 800-577-5771 • 626-336-2812

emtek.com

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience

2019_Emtek_Multi_Point_Price_Book_Cover_ps_072718.indd 1-2 7/27/18 10:04 AM

multi point lock trim - emtekassa abloy, the global leader in door opening solutions multi point...

Documents