multi-forma ii room for unlimited possibilities hinge-door...

169

MULTI-FORMA II

E Schlafen: MULTI-FORMA II Seite 169 4. 2014 E

MULTI-FORMA II Room for unlimited possibilities

The modern, innovative MULTI-FORMA II wardrobe system is suitable for individual arrangements because it is particularly versatile. New front designs and unique intermediateunits give MULTI-FORMA II its particularly exclusive look. As a universal wardrobe system, the design of MULTI-FORMA II enables you to combine its units with all of the units in thevarious hülsta Bedroom ranges and almost every type of interior style.

To enhance the competency of the range, MULTI-FORMA II now also includes a walk-in room system which incorporates all the key performance features (planning, surface versions, special sizes, etc.) of the previous carcase system. Furthermore, this room/niche system also provides a separate system of fronts. In this way, small niche combinationsand even magnanimous room systems can be created individually. The tried and tested planning system from MULTI-FORMA II involving basic and extension units has been incorporated in the room/niche system. This guarantees a simple and comfortable initiation to the range including easy planning.

Hinge-, folding- and sliding-door wardrobes as well as a room system

Hinge-door wardrobes and folding-door wardrobes see pages 172-199

Sliding-door wardrobes see pages 200-212

Room system see pages 213-223

Important notes: Generally speaking, you as a dealer/qualified fitter are responsible for the cor-rect wall mounting of the units. That is why wall mounting should only be carried out by properlytrained and qualified fitters. hülsta supplies materials for mounting units on walls for nearly all the units and which should beused for safety and for constructional reasons. The assembly materials supplied by hülsta (plugs,screws) are only suitable for fitting components on to concrete in firmness class (C12/15).For other materials (please see separate materials table in the wall composition chapter) we pro-vide you with an assembly mortar set as an extra order. Please note that this assembly mortarset is also only suitable for the materials listed in the materials table.If walls are made up of other materials (e.g. plastered or lighter wall materials), one should useanother method of mounting better suited to the load on site.Please note that if the units are not mounted properly on the wall, there is a risk of the units fal-ling down or tipping over – especially when alternative mounting materials acquired on site havebeen used.For the reasons stated above it is absolutely essential to enquire about the composition of anywalls before signing any contracts.

170E Schlafen: MULTI-FORMA II Seite 170 4. 2014E

Overview: Hinge-, folding- and sliding-door wardrobes as well as room systemHinge-door wardrobes

229.6 cm high 268.0 cm high 337.8 cm high

Folding-door wardrobes

Sliding-door wardrobes

Room system

System heightsSystem widths and depth: see the separate chapters for hinge-/folding-door wardrobes, sliding-door wardrobes or room system

1 2 3

4

8 9

6 7

Intermediate units for hinge-/folding-door wardrobes

229.6 cm high 268.0 cm high

229.6 cm high 268.0 cm high

max. 268.0 / 272.6 cm high

171

MULTI-FORMA II


Design versions for hinge-/folding-door wardrobes

Handle versions for hinge-/folding-doors

Design versions for sliding-door wardrobes

Design A Design M Design G Design L SOLIST

Handle versions for sliding-doors

Design version for room system

Design A

Design and handle versions

Handle 011(standard handle)

Handle 012

Handle 014/015

Handle026/013

Handle 029/030

Handle 032/033

Handle 034/035

Handle 031

Wood/lacquer/high-gloss versions

* The carcase for high-glossfronts is in matt lacquer in thematching colour.The various designs are available in different versions.See here the separate lists ofversions for the hinge-/folding-door wardrobes, sliding-doorwardrobes and for the room system.

White lacquer (standard)Light interior veneer Dark interior veneer

Versionsinterior wardrobe carcase/wardrobe fittings

Handle version for room system

Lacquer

High-gloss

Veneer

White lacquerWool white lacquerSand lacquerGrey lacquer

High-gloss pure white*High-gloss white*High-gloss sand*High-gloss grey*

Structured beechNatural oakLight brown ashCore walnutCherrywood gold

Versionsouter wardrobe carcase and fronts

Design A Design A pluswith side fillets

Design G Design G pluswith side fillets

Design L Design R Design F Design F pluswith side fillets


The modern, innovative MULTI-FORMA II wardrobe system is suitable for individual arrangements because it is particularly versatile.New front designs and unique intermediate units give MULTI-FORMA II its particularly exclusive look. As a universal wardrobe system,the design of MULTI-FORMA II enables you to combine its units with all of the units in the various hülsta Bedroom ranges and almostevery type of interior style.

Design idea You can choose from a variety of design versions for the MULTI-FORMA II hinge- and folding-door wardrobes:● Design A● Design A plus – with side fillets● Design G● Design G plus – with side fillets● Design L● Design R● Design F● Design F plus – with side filletsThe various wood/lacquer versions and high-gloss versions (exclusively for fronts) and a number of different handle versions underlinethe versatility of the MULTI-FORMA II wardrobe system.

You can also choose from a variety of versions for the wardrobe interior fittings for the MULTI-FORMA II hinge- and folding-door wardrobes:● White lacquer (standard)● Light interior veneer ● Dark interior veneerPlease state exactly in the order, in which version you require the interior fittings for your wardrobe. If no details of the version are given in the order, the interior fittings are delivered in the standard white lacquer version.

Hinge- and folding-door wardrobes according to the endless assembly principle● Hinge- and folding-door wardrobes and intermediate units can be combined with one another● Optional: - with all-round passepartout

- with top LED lamp (12 V; 2.4 W)- with all-round passepartout and top LED lamp (12 V; 2.4 W) - with cornice and integrated LED spotlamps (12 V, 1 W)- with cornice and integrated light panels (230 V, 8 W)The lights are operated by a standard external footswitch.

● Doors in Design A, A plus, F and F plus with an optional mirror (side facet)● MULTI-FORMA II comes in various widths: the great number of different unit widths means you can create total unit widths in

10 cm steps● Wardrobe inside widths: 38, 48, 68, 78, 98, 158, 198 cm● Different basic wardrobe heights: 229.6 cm, 268.0 cm and 337.8 cm for the hinge-door wardrobes; 229.6 cm and 268.0 cm for

the folding-door wardrobesImportant note: The wardrobe height of 337.8 cm consists of a top wardrobe unit, standard 69.8 cm high, and of a lower wardrobe

unit. The wardrobe sides and the full-length hinge-doors are split visually. In the case of height reductions, the lower wardrobe unit is always reduced in height.

● MULTI-FORMA II is variable: height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm withoutsurcharge (width reductions are not possible on doors with high-gloss fronts in Design A, G and F).

● Wardrobe outside depth (without handles): 61.6 cm● Wardrobe inside depth: 56.0 cm● Numerous intermediate units with different features for a more open look● Extra-wide panorama units (160 and 200 cm) without a centre partition keep things well organized● Profiled hinge-door end units● Hinge-door corner wardrobes (45° and fully accessible corner 90°)● Functional and high-quality wardrobe interior fittings (see separate "Wardrobe interior fittings" chapter) ● Standard interior fittings per unit: 2 fitted shelves, 1 clothes rod, for hinge-door wardrobes in 337.8 cm height also with 1 fitted shelf

in top wardrobe unit.● Side and rear sloping possible (see "Special-sized products" chapter)

● All wardrobe doors with cushioning mechanism● All wardrobe doors with handle and spring hinges● Innovative door opening bracket (lies on wardrobe carcase, recedes out of view)● Extra-wide fitted wardrobe shelves (160 and 200 cm) of triple glued chipboard● Unobtrusive 2.5 mm size holes● All-metal hinges● Low plinth with trapezoid-shaped brackets for simple assembly● All partitions and side sections have a special plinth adjustment device which makes exact horizontal and vertical assembly much easier● hülsta-SoftFlow: Drawers of intermediate units on hidden bearings incl. auto pull-in feature with brake as fully pull-out units● hülsta-MagicClose: All wooden hinge-doors with door cushioning system

Quality features

Concept/planning possibilities

Height reductions at intervals of 1 mm,width and depth reductions at intervals

of 1.0 cm without surcharge (Width reductions are not possible on doors with high-gloss fronts

in Design A, G and F)!

MULTI-FORMA II Hinge- and folding-door wardrobes

173

MULTI-FORMA II


Lists of versions for hinge- and folding-door wardrobes

Handleheight: 24.8 cm

matchingversion

Handleheight:24.9 cm







Handle versions for hinge-/folding-doors

Handle 032/033 **Handle 012Handle 011(standard handle)

Handle 029/030* **Handle 026/013 Handle 031 **Handle 034/035Handle 014/015

High-gloss chrome

Matt chrome

029

030

High-gloss chrome

Aluminium colour

026

013

Matt chrome

011

Matt chrome/wood/lacquer version

012

Wood/lacquer version

031

High-gloss chrome

Matt chrome

032

033

High-gloss chrome

Matt chrome

034

035

High-gloss chrome

Matt chrome

014

015

matching version

without surchargewithout surcharge without surcharge Surcharge per handle: Surcharge per handle: Surcharge per handle: Surcharge per handle: Surcharge per handle:

With the MULTI-FORMA II hinge- and folding-door wardrobes you can choose between different handles. The desired handle and the desired wood/lacquer version for matchinghandles must always be stated in the order (handles for high-gloss fronts are in matt lacquer in the matching colour).If no details of the handle are stated in the order, the standard handle 011 is supplied (exceptions: Design F and F plus always with a standard formed wooden handle, Design G and Gplus always with a standard handle 030 or 029).* Handle 030 is the standard handle for Design G and G plus (handles 030 and 029 for Design G and G plus without surcharge)** Handle 029/030, 032/033 and 031 are not possible for Design L

With the MULTI-FORMA II hinge- and folding-door wardrobes and the intermediate units (only available in Design A) you can choose the carcase and the front in a different version.Please state this clearly in the order. When versions from different price groups are exchanged, the higher price group is always charged.


Version

973974975

Model no.

Versionswardrobe interior fittingsWith the MULTI-FORMA II hinge- and folding-door wardrobes you can choose betweenthree versions for the wardrobe interior fittings. The desired version must be stated in theorder. If no details are given in the order, the wardrobe interior fittings are supplied inwhite lacquer.

Design versions for wardrobe doors Design A Design G Design L Design R Design F Design F plus

with side filletsDesign G plus

with side filletsDesign A plus

with side fillets


Lists of versions for hinge- and folding-door wardrobesLacquer

High-gloss

Veneer

Lacquer

Veneer



ApplicationModel no.

030(standard handle)029

Wood/lacquer/high-gloss versions – Design AModel no. Carcase*/front Price group




IIII

IIIIIIII

IIIIIIIIII

011(standard handle)012014 / 015026 / 013029 / 030032 / 033034 / 035031

* The carcase for high-gloss fronts is in matt lacquer in the matching colour.

Handles

Handles

Lacquer

High-gloss

Veneer

Wood/lacquer/high-gloss versions – Design A plus with side filletsModel no. Carcase*/front Price group




IIII

IIIIIIII

IIIIIIIIII

011(standard handle)012014 / 015026 / 013029 / 030032 / 033034 / 035031


Handles

Lacquer

High-gloss

Veneer

Wood/lacquer/high-gloss versions – Design GModel no. Carcase*/front Price group




IIII

IIIIIIII

IIIIIIIIII


Lacquer

Veneer



Application/side filletsModel no.

030(standard handle)029

Handles

Lacquer

High-gloss

Veneer

Wood/lacquer/high-gloss versions – Design G plus with side filletsModel no. Carcase*/front Price group




IIII

IIIIIIII

IIIIIIIIII


Lacquer

Veneer

Pure white lacquerWhite lacquerWool white lacquerSand lacquerGrey lacquer


Model no. Side fillets

D01D100D02D03

D05D06D07

D101

D09D102D11D12D13

D14D106D15D16

D49D108D51D52D53

D61D103D62D63

D65D66D67D104

D69D105D71D72D73

D14D106D15D16

D18D19D20D107

D49D108D51D52D53

D74D109D75D76

D82D111D84D85D86

D74D109D75D76

D78D79D80D110

D82D111D84D85D86

D60D61D103D62D63

D69D105D71D72D73

175

MULTI-FORMA II


Lacquer

High-gloss

Veneer

VeneerHigh-gloss

Wood/lacquer/high-gloss versions – Design LModel no. Carcase*/front Price group


Pure white lacquerWhite lacquerSand lacquerGrey lacquer



011(standard handle)012014 / 015026 / 013034 / 035

* The carcase for high-gloss fronts is in matt lacquer in the matching colour.The carcase is available in all the different versions (see e.g. Design G). Please state clearly in the order! If the carcase is required in Cherrywood gold, price group III is charged.

Wood/lacquer/high-gloss versions – Design F

Model no. Carcase*/front Price group





ApplicationModel no. Formed woodenhandle


Handles

IIIIIIII

Lacquer

Veneer

IIII

IIIIIIII

IIIIIIIIII

Lacquer

Veneer

Wood/lacquer versions – Design R

Model no. Carcase/front Price group

White lacquer


011(standard handle)012014 / 015026 / 013029 / 030032 / 033034 / 035031

Handles

I

IIIIIIIIII

Lacquer

High-gloss

Veneer

Wood/lacquer/high-gloss versions – Design F plus with side fillets






Application/side filletsModel no. Formed wooden

handle


Veneer

IIII

IIIIIIII

IIIIIIIIII

With the MULTI-FORMA II hinge- and folding-door wardrobes and the intermediate units (only available in Design A) you can choose the carcase and the frontin a different version. Please state this clearly in the order. When versions from different price groups are exchanged, the higher price group is always charged.

Changing versions

D26D27D28D112

D59D22D23D24

D30D113D32D33D34

D41D115D42D43

D45D46D47D116

D54D117D56D57D58

D54D117D56D57D58

D35

D36D114D38D39D40

D87D118D88D89

D91D92D93

D119

D95D120D97D98D99

D95D120D97D98D99


Wardrobes according to the endless assembly principleHinge- and folding-door wardrobes can be planned endlessly and combined with one another. Due to the various element widths one can create many total wardrobe widths. In thisway the available floor space can be exploited to the full. For each wardrobe combination, the first element on the left is considered to be the basic unit, incorporating both outer side-sections. One can only include one basic unit in each combination. When adding on extension units, the right-hand side-section of the basic unit is employed as the end side-sectionof the complete combination. In the case of single-door hinge-door units as well as folding-door wardrobes one can choose between left- and right-hand hinges. The graphics shownbelow give you an excerpt of our wardrobe assortment. For a more varied look, we suggest using intermediate units for creating some alternatives.

Standard interior fittings per unit: 2 fitted shelves, 1 clothes rod, for hinge-door wardrobes in 337.8 cm height also with one fitted shelf in the top wardrobe unit. Wardrobe interior fittings optionally in white lacquer (standard), light interior veneer or dark interior veneer (see here page 173). Please state in the order!

Wardrobe examples for hinge-door wardrobes

Hinge- and folding-door wardrobes

● Hinge-door wardrobes can be combined with folding-door wardrobes and intermediate units

● Optionally available with many different handles (see page 173)● Straight units and profiled end units● Mirror fronts for doors in Design A, A plus, F and F plus at a surcharge● Passepartout, cornice and lamps at a surcharge● Top LED lamps at a surcharge● 3 different basic heights: 229.6; 268.0; 337.8 cm● Unit outside widths: 42, 52, 72, 82, 102 cm (basic units)

40, 50, 70, 80, 100 cm (extension units)● Unit inside widths: 38, 48, 68, 78, 98 cm● Outside depth: 61.6 cm● Inside depth: 56.0 cm

For calculating the total width when fitting a passepartout (or a cornice withlamp), please note the protrusion of 1.7 cm (or 0.5 cm) left and right!

● Folding-door wardrobes can be combined with hinge-door wardrobes and intermediate units

● Optionally available with many different handles (see page 173)● Extra-wide panorama units in 160/162 and 200/202 cm width without partition ● Mirror fronts for doors in Design A, A plus, F and F plus at a surcharge● Passepartout, cornice and lamps at a surcharge● Top LED lamps at a surcharge● 2 different basic heights: 229.6; 268.0 cm● Unit outside widths: 82, 102, 162, 202 cm (basic units)

80, 100, 160, 200 cm (extension units)● Unit inside widths: 78, 98, 158, 198 cm● Outside depth: 61.6 cm● Inside depth: 56.0 cm


Wardrobe examples for folding-door wardrobes

Folding-door wardrobe in 229.6 cm heightHinge-door wardrobe in 229.6 cm height

Hinge-door wardrobe in 268.0 cm height Folding-door wardrobe in 268.0 cm height

Hinge-door wardrobe in 337.8 cm height Important note:The hinge-door wardrobe height of 337.8 cm consists of a top wardrobe unit,standard 69.8 cm high, and of a lower wardrobe unit. The wardrobe sides andthe full-length hinge-doors are split visually. In the case of height reductions, thelower wardrobe unit is always reduced in height.Standard interior fittings per unit:in lower wardrobe unit: 2 fitted shelves, 1 clothes rodin top wardrobe unit: 1 fitted shelf

177

MULTI-FORMA II


Hinge- and folding-door wardrobes

Examples of wardrobes with hinge-door corner units, intermediate units, special sizes; lamps

● Intermediate units can only be supplied in Design A● Intermediate units can be combined with hinge- and folding-door wardrobes.

Two intermediate units can also be placed adjacent to one another (exception:intermediate units 1 and 4).

● Optionally available with many different handles (see page 195● Many different intermediate units with various features (see pages 196-198)● Outside depth: 61.6 cm

● See ”Special-sized products” chapter for notes on side sloping and further specialsizes

● Hinge-door corner wardrobes can be combined with hinge-/folding-door wardrobes and intermediate units

● Optionally available with many different handles (see page 173)● Hinge-door corner wardrobe 45° with 1 fitted shelf without clothes rod and 1 fitted

shelf with clothes rod● Hinge-door corner wardrobe with fully accessible corner 90° with 2 fitted shelves

and 1 clothes rod each left and right ● 3 different basic heights: 229.6; 268.0; 337.8 cm● Unit outside widths: 97.3 x 97.3 or 112.7 x 112.7 cm (basic units)

95.3 x 97.3 or 110.7 x 112.7 cm (extension units)● Outside depth: 61.6 cm● Inside depth: 56.0 cm


Hinge-door corner wardrobe 45°

Hinge-door corner wardrobe with fully accessible corner 90°

with integrated intermediate unit 4

with integrated intermediate unit 3 and side sloping

Lamps

Remote control unitSurcharge for remote control unit (transmitter + receiver) type 379 = Surcharge for extra transmitter type 3791 = Surcharge for extra receiver type 3792 =

4-channel remote control unit is also possible(see chapter "Switch options for lamps")!

Cornice with integrated LED spotlampsSurcharge for each additional spotlamp type 369 = Price reduction for one spotlamp (if not required in cornice) type 368 =

Cornice with integrated light panelsSurcharge for each additional light panel type 3681 = Price reduction for one light panel (if not required in cornice) type 3680 =

Top LED lampSurcharge for each additional lamp type 3691 =

All hinge- and folding-door wardrobes are available with an optional cornice and LED lamps or with atop LED lamp. Either one integrated LED spotlamp (12 V, 1 W), one light panel (230 V, 8 W) or one topLED lamp (12 V, 2.4 W) is fitted standard above each unit – 1 or 2 door. Exception: in the case ofpanorama units two integrated LED spotlamps (or two light panels or two top LED lamps) are fitted.

If required, an integrated LED spotlamp, a light panel or a top LED lamp can be fitted centrally aboveeach door. It is also possible to remove individual spotlamps or light panels with a price reduction.Please include a sketch in all cases.

Switching is done standard by an external footswitch. A remote control unit is also available as an alternative, which is charged extra. The remote control unit incorporates a transmitter, with which the entire cornice lighting can be switched on and off. Extra transmitters are available at asurcharge. The footswitch is omitted when the remote control unit is employed.

When an intermediate unit with integrated LED lamps and top LED lamps or a cornice with LEDlamps are included together, the switch is coupled.

Please note: When planning a cornice, please note that a minimum distance of 2.0 cm to the ceilingmust be observed.

with passepartout with passepartout and top LED lamp

Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge; when reducing the height of doors in Design L only the top and bottom door panels are reduced in height (the middle panels always retain their original height). Width reductions are not possible on doors with high-gloss fronts in Design A, G and F.

61.6 cm 72.0 cm

see pages 178-193Widths

Depths (without handles)

Heightssee sizes without cornice

+ 2.9 cmsee sizes without cornice

+ 7.9 cm

with cornice incl. lamp

see sizes without cornice+ 4.6 cm

70.3 cm

with top LED lamp

see sizes without cornice+ 5.0 cm

72.0 cm

without cornice

61.6 cm

229.6; 268.0 and 337.8 cm

Dims.

0

0


Hinge-door wardrobes – Basic units List of versions: see pages 174-175

L/R = door hinge left/right

For each project please remember to leave a 2.0 cmgap to the ceiling and at the side for assembly!

L

Height: 229.6; 268.0 and 337.8 cm (Heights with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with passepartout: + 1.7 cm each side; with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)

Basic unitswith 2 outer side-sections (each 2 cm thick)For each wardrobe combination, the first element onthe left is considered to be the basic unit, incorporatingboth outer side-sections. One can only include onebasic unit in each combination. When adding on exten-sion units, the right-hand side-section of the basic unitis employed as the end side-section of the completecombination.The surcharge for the passepartout frame of the basicunits includes the left- and right-hand vertical frame aswell as the horizontal frame, the surcharge for theextension units only includes the horizontal frame.When adding on extension units, the right-hand frameof the passepartout of the basic unit is employed as theend unit of the complete combination.Cornice and passepartout unit are full-length up to302 cm width.

Single-door unit,left or right,42 cm wide

229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII

Design A Design G Design L

A20101LA201012R

229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII

229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII

Design R

G20101LG201012R

L20101LL201012R

–

R20101LR201012R

A30101LA301012R

G30101LG301012R

L30101LL301012R

–

R30101LR301012R

A40101LA401012R

G40101LG401012R

L40101LL401012R

–

R40101LR401012R

A20102LA201022R

G20102LG201022R

L20102LL201022R

–

R20102LR201022R

A30102LA301022R

G30102LG301022R

L30102LL301022R

–

R30102LR301022R

A40102LA401022R

G40102LG401022R

L40102LL401022R

–

R40102LR401022R

A02011LA02012R

G02011LG02012R

L02011LL02012R

–

R02011LR02012R

A03011LA03012R

G03011LG03012R

L03011LL03012R

–

R03011LR03012R

A04011LA04012R

G04011LG04012R

L04011LL04012R

–

R04011LR04012R

Left profiled end unit,single door, left or right,72 cm wide

Left profiled end unit,single door, left or right,82 cm wide

L

L

Mirrors are possible on the hinge-door and on the slopingside! Please state clearly in the order! In this case 2 mirrors must be ordered.


Design A pluswith side fillets

AP20101LAP201012R

AP30101LAP301012R

AP40101LAP401012R

AP20102LAP201022R

AP30102LAP301022R

AP40102LAP401022R

AP02011LAP02012R

AP03011LAP03012R

AP04011LAP04012R

Design G pluswith side fillets

GP20101LGP201012R

GP30101LGP301012R

GP40101LGP401012R

GP20102LGP201022R

GP30102LGP301022R

GP40102LGP401022R

GP02011LGP02012R

GP03011LGP03012R

GP04011LGP04012R

179

MULTI-FORMA II


Hinge-door wardrobes – Basic units


Please state the versions for the handlesand the wardrobe interior fittings!

Please also note the functional and high-qualitywardrobe interior fittings as well as the special articles and possible special-sized productsin the separate chapters on "Wardrobe interiorfittings" and "Special products".

Surcharge for mirror:Each wardrobe door in Design A, A plus, F and F plus can be fitted with an optional mirror (vertical facet) which is charged extra (mirrorsnot possible for Design G, G plus, L and R).

Surcharge for cornice with integrated

LED spotlamps

(12 V; 1 W)

1 spotlamp per unit

Surcharge for top LED lamp

(12 V; 2.4 W)

1 lamp per unit

Surcharge forpassepartout

Please mark exactly in the front sketch, or state in the order (from the left), whichhinge-doors are to be fitted with a mirror.

Surcharge for mirror per hinge-door:

Design F pluswith side fillets

FP20101LFP201012R

3390 3391380

FP30101LFP301012R

3390 3391380

FP40101LFP401012R

3390 3391380

FP20102LFP201022R

3400 3401380

FP30102LFP301022R

3400 3401380

FP40102LFP401022R

3400 3401380

FP02011LFP02012R

341 3410 3411380

FP03011LFP03012R

3413 3410 3411380

FP04011LFP04012R

3414 3410 3411380

Surcharge for cornice with integrated light panels

(230 V; 8 W)

1 lamp per unit

Design F

F20101LF201012R

F30101LF301012R

F40101LF401012R

F20102LF201022R

F30102LF301022R

F40102LF401022R

F02011LF02012R

F03011LF03012R

F04011LF04012R



Hinge-door wardrobes – Basic units List of versions: see pages 174-175


L

Twin-door unit,82 cm wide


A2011LA2012R

G2011LG2012R

L2011LL2012R

–

R2011LR2012R

A3011LA3012R

G3011LG3012R

L3011LL3012R

–

R3011LR3012R

A4011LA4012R

G4011LG4012R

L4011LL4012R

–

R4011LR4012R

A0202 G0202 L0202

–

R0202

A0302 G0302 L0302

–

R0302

A0402 G0402 L0402

–

R0402

A202 G202 L202

–

R202

A302 G302 L302

–

R302

A402 G402 L402

–

R402




Design A Design G Design L Design RDesign A pluswith side fillets


229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII

229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII

229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII

AP2011LAP2012R

AP3011LAP3012R

AP4011LAP4012R

AP0202

AP0302

AP0402

AP202

AP302

AP402

GP2011LGP2012R

GP3011LGP3012R

GP4011LGP4012R

GP0202

GP0302

GP0402

GP202

GP302

GP402


181

MULTI-FORMA II



MULTI-FORMA IIHinge-door wardrobes – Basic unitsPlease state the versions for the handles

and the wardrobe interior fittings!

F2011LF2012R

342 3420 3421380

F3011LF3012R

3423 3420 3421380

F4011LF4012R

3424 3420 3421380

F0202 343 3430 3431380

F0302 3433 3430 3431380

F0402 3434 3430 3431380

F202 344 3440 3441380

F302 3443 3440 3441380

F402 3444 3440 3441380


Design F

FP2011LFP2012R

FP3011LFP3012R

FP4011LFP4012R

FP0202

FP0302

FP0402

FP202

FP302

FP402




LED spotlamps

(12 V; 1 W)

1 spotlamp per unit


(12 V; 2.4 W)

1 lamp per unit



(230 V; 8 W)

1 lamp per unit





Hinge-door wardrobes – Extension unitsFor each project please remember to leave a 2.0 cmgap to the ceiling and at the side for assembly!

List of versions: see pages 174-175


229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII

A001011LA00101R

229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII

229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII

R


G001011LG00101R

L001011LL00101R

–

R001011LR00101R

A101011LA10101R

G101011LG10101R

L101011LL10101R

–

R101011LR10101R

A701011L A70101R

G701011L G70101R

L701011L L70101R

–

R701011L R70101R

A001021LA00102R

G001021LG00102R

L001021LL00102R

–

R001021LR00102R

A101021LA10102R

G101021LG10102R

L101021LL10102R

–

R101021LR10102R

A701021LA70102R

G701021LG70102R

L701021LL70102R

–

R701021LR70102R

A00011LA00012R

G00011LG00012R

L00011LL00012R

–

R00011LR00012R

A01011LA01012R

G01011LG01012R

L01011LL01012R

–

R01011LR01012R

A71011LA71012R

G71011LG71012R

L71011LL71012R

–

R71011LR71012R

R

Right profiled end unit,single door, left or right,70 cm wide

R

Right profiled end unit,single door, left or right,80 cm wide





Design G pluswith side filletsExtension units

with 1 centre partition (2 cm thick)The surcharge for the passepartout frame of theextension units only includes the horizontalframe. When adding on extension units, the right-hand frame of the passepartout of the basic unitis employed as the end unit of the complete combination.Cornice and passepartout unit are full-lengthup to 302 cm width.

AP001011LAP00101R

AP101011LAP10101R

AP701011L AP70101R

AP001021LAP00102R

AP101021LAP10102R

AP701021LAP70102R

AP00011LAP00012R

AP01011LAP01012R

AP71011LAP71012R

GP001011LGP00101R

GP101011LGP10101R

GP701011L GP70101R

GP001021LGP00102R

GP101021LGP10102R

GP701021LGP70102R

GP00011LGP00012R

GP01011LGP01012R

GP71011LGP71012R

183

MULTI-FORMA II


Hinge-door wardrobes – Extension units




F001011LF00101R

3450 3451382

F101011LF10101R

3450 3451382

F701011L F70101R

3450 3451382

F001021LF00102R

3630 3631382

F101021LF10102R

3630 3631382

F701021LF70102R

3630 3631382

F00011LF00012R

346 3460 3461382

F01011LF01012R

346 3460 3461382

F71011LF71012R

346 3460 3461382


Design F

FP001011LFP00101R

FP101011LFP10101R

FP701011L FP70101R

FP001021LFP00102R

FP101021LFP10102R

FP701021LFP70102R

FP00011LFP00012R

FP01011LFP01012R

FP71011LFP71012R



LED spotlamps

(12 V; 1 W)

1 spotlamp per unit


(12 V; 2.4 W)

1 lamp per unit



(230 V; 8 W)

1 lamp per unit





Hinge-door wardrobes – Extension units List of versions: see pages 174-175


R




229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII

A0011LA0012R

229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII

229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII

G0011LG0012R

L0011LL0012R

–

R0011LR0012R

A1011LA1012R

G1011LG1012R

L1011LL1012R

–

R1011LR1012R

A7011LA7012R

G7011LG7012R

L7011LL7012R

–

R7011LR7012R

A0002 G0002 L0002

–

R0002

A0102 G0102 L0102

–

R0102

A7102 G7102 L7102

–

R7102

A002 G002 L002

–

R002

A102 G102 L102

–

R102

A702 G702 L702

–

R702


Extension unitswith 1 centre partition (2 cm thick)The surcharge for the passepartout frame of theextension units only includes the horizontalframe. When adding on extension units, the right-hand frame of the passepartout of the basic unitis employed as the end unit of the complete combination.Cornice and passepartout unit are full-lengthup to 302 cm width.




AP0011LAP0012R

AP1011LAP1012R

AP7011LAP7012R

AP0002

AP0102

AP7102

AP002

AP102

AP702

GP0011LGP0012R

GP1011LGP1012R

GP7011LGP7012R

GP0002

GP0102

GP7102

GP002

GP102

GP702

185

MULTI-FORMA II



Hinge-door wardrobes – Extension unitsPlease state the versions for the handles


F0011LF0012R

347 3470 3471382

F1011LF1012R

347 3470 3471382

F7011LF7012R

347 3470 3471382

F0002 348 3480 3481382

F0102 348 3480 3481382

F7102 348 3480 3481382

F002 349 3490 3491382

F102 349 3490 3491382

F702 349 3490 3491382


Design F

FP0011LFP0012R

FP1011LFP1012R

FP7011LFP7012R

FP0002

FP0102

FP7102

FP002

FP102

FP702



LED spotlamps

(12 V; 1 W)

1 spotlamp per unit


(12 V; 2.4 W)

1 lamp per unit



(230 V; 8 W)

1 lamp per unit






Folding-door wardrobes – Basic unitsFor each project please remember to leave a 2.0 cmgap to the ceiling and at the side for assembly!



229.6 cm

high

IIIIII

A2520 G2520 L2520

–

R2520

268.0 cm

high

IIIIII

A3520 G3520 L3520

–

R3520

229.6 cm

high

IIIIII

A2420 G2420 L2420

–

R2420

268.0 cm

high

IIIIII

A3420 G3420 L3420

–

R3420

229.6 cm

high

IIIIII

A2321LA2322R

G2321LG2322R

L2321LL2322R

–

R2321LR2322R

268.0 cm

high

IIIIII

A3321LA3322R

G3321LG3322R

L3321LL3322R

–

R3321LR3322R

Twin-door unit,left or right,82 cm wide


Panorama unit,4-door, 162 cm wide;without partition


L

L

229.6 cm

high

IIIIII

A2221LA2222R

G2221LG2222R

L2221LL2222R

–

R2221LR2222R

268.0 cm

high

IIIIII

A3221LA3222R

G3221LG3222R

L3221LL3222R

–

R3221LR3222R

Height: 229.6 and 268.0 cm (Heights with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with passepartout: + 1.7 cm each side; with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with passepartout and/or top LED lamp or cornice incl. lamp: see table page 177)




AP2520

AP3520

AP2420

AP3420

AP2321LAP2322R

AP3321LAP3322R

AP2221LAP2222R

AP3221LAP3222R

GP2520

GP3520

GP2420

GP3420

GP2321LGP2322R

GP3321LGP3322R

GP2221LGP2222R

GP3221LGP3222R

187

MULTI-FORMA II


Folding-door wardrobes – Basic units




F2520 353 3530 3531381

F3520 3533 3530 3531381

F2420 352 3520 3521381

F3420 3523 3520 3521381

F2321LF2322R

351 3510 3511380

F3321LF3322R

3513 3510 3511380

F2221LF2222R

350 3500 3501380

F3221LF3222R

3503 3500 3501380

2 lamps 2 spotlamps 2 lamps





Design F

FP2520

FP3520

FP2420

FP3420

FP2321LFP2322R

FP3321LFP3322R

FP2221LFP2222R

FP3221LFP3222R



LED spotlamps

(12 V; 1 W)

1 spotlamp per unit


(12 V; 2.4 W)

1 lamp per unit



(230 V; 8 W)

1 lamp per unit

Please mark exactly in the front sketch, or state in the order (from the left), which folding-door wings are to be fitted with

a mirror.

Surcharge for mirror per folding-door wing:



Folding-door wardrobes – Extension units List of versions: see pages 174-175





R

R

229.6 cm

high

IIIIII

A0520 G0520 L0520

–

R0520

268.0 cm

high

IIIIII

A1520 G1520 L1520

–

R1520

229.6 cm

high

IIIIII

A0420 G0420 L0420

–

R0420

268.0 cm

high

IIIIII

A1420 G1420 L1420

–

R1420

229.6 cm

high

IIIIII

A0321LA0322R

G0321LG0322R

L0321LL0322R

–

R0321LR0322R

268.0 cm

high

IIIIII

A1321LA1322R

G1321LG1322R

L1321LL1322R

–

R1321LR1322R

229.6 cm

high

IIIIII

A0221LA0222R

G0221LG0222R

L0221LL0222R

–

R0221LR0222R

268.0 cm

high

IIIIII

A1221LA1222R

G1221LG1222R

L1221LL1222R

–

R1221LR1222R






AP0520

AP1520

AP0420

AP1420

AP0321LAP0322R

AP1321LAP1322R

AP0221LAP0222R

AP1221LAP1222R

GP0520

GP1520

GP0420

GP1420

GP0321LGP0322R

GP1321LGP1322R

GP0221LGP0222R

GP1221LGP1222R


189

MULTI-FORMA II



Folding-door wardrobes – Extension unitsPlease state the versions for the handles


F0520 358 3580 3581383

F1520 358 3580 3581383

F0420 357 3570 3571383

F1420 357 3570 3571383

F0321LF0322R

356 3560 3561382

F1321LF1322R

356 3560 3561382

F0221LF0222R

355 3550 3551382

F1221LF1222R

355 3550 3551382







Design F

FP0520

FP1520

FP0420

FP1420

FP0321LFP0322R

FP1321LFP1322R

FP0221LFP0222R

FP1221LFP1222R



LED spotlamps

(12 V; 1 W)

1 spotlamp per unit


(12 V; 2.4 W)

1 lamp per unit



(230 V; 8 W)

1 lamp per unit

Please mark exactly in the front sketch, or state in the order (from the left), whichfolding-door wings are to be fitted with

a mirror.

Surcharge for mirror per folding-door wing:



Hinge-door corner wardrobes – Basic units

For each project please remember to leavea 2.0 cm gap to the ceiling and at the sidefor assembly!


Hinge-door corner wardrobe 45°Interior fittings:1 fitted shelf without clothes rod 1 fitted shelf with clothes rod For production we require the details of series of assembly from left to right.


R

Basic unitswith 2 outer side-sections (each 2 cm thick)

For each wardrobe combination, the first elementon the left is considered to be the basic unit,incorporating both outer side-sections. One canonly include one basic unit in each combination.When adding on extension units, the right-handside-section of the basic unit is employed as theend side-section of the complete combination.Cornice and passepartout unit are full-lengthup to 302 cm width.

229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII

229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

A22191LA22192R

G22191LG22192R

L22191LL22192R

–

R22191LR22192R

A32191LA32192R

G32191LG32192R

L32191LL32192R

–

R32191LR32192R

A42191LA42192R

G42191LG42192R

L42191LL42192R

–

R42191LR42192R

A25191LA25192R

G25191LG25192R

L25191LL25192R

–

R25191LR25192R

A35191LA35192R

G35191LG35192R

L35191LL35192R

–

R35191LR35192R

IIIIII

A45191LA45192R

G45191LG45192R

L45191LL45192R

–

R45191LR45192R

Height: 229.6; 268.0 and 337.8 cm (Heights with top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with top LED lamp or cornice incl. lamp: see table page 177)

Hinge-door corner wardrobe withfully accessible corner 90°Twin-door unitLeft-hand type (L): left 2 fitted shelvesand 1 clothes rod, each 106.7 cmwide; right 2 fitted shelves and 1 clothes rod, each 52.5 cm wide Right-hand type (R): interior fittings inreverse orderFor production we require the detailsof series of assembly from left to right.

L

The door hinges of any 1-door wardrobeunits included which are situated directlynext to the hinge-door corner wardrobewith fully accessible corner 90° must befitted on the side next to this hinge-doorcorner wardrobe!

Depending on the handle version, the door hinges of any 1-door wardrobe unitswhich are situated directly next to thehinge-door corner wardrobe 45° must befitted on the side next to this hinge-doorcorner wardrobe (exception: this is notnecessary when fitting handles 011, 012,013 and 026)!



AP22191LAP22192R

AP32191LAP32192R

AP42191LAP42192R

AP25191LAP25192R

AP35191LAP35192R

AP45191LAP45192R

GP22191LGP22192R

GP32191LGP32192R

GP42191LGP42192R

GP25191LGP25192R

GP35191LGP35192R

GP45191LGP45192R

191

MULTI-FORMA II


Hinge-door corner wardrobes – Basic unitsPlease state the versions for the handles



F22191LF22192R

3600 3601380

F32191LF32192R

3600 3601380

F42191LF42192R

3600 3601380

F25191LF25192R

3610 3611381

F35191LF35192R

3610 3611381

F45191LF45192R

3610 3611381





Design F

FP22191LFP22192R

FP32191LFP32192R

FP42191LFP42192R

FP25191LFP25192R

FP35191LFP35192R

FP45191LFP45192R



LED spotlamps

(12 V; 1 W)

1 spotlamp per unit


(12 V; 2.4 W)

1 lamp per unit



(230 V; 8 W)

1 lamp per unit



Height: 229.6; 268.0 and 337.8 cm (Heights with top LED lamp or cornice incl. lamp: see table page 177)Width: see table (Widths with cornice: + 0.5 cm each side)Depth: 61.6 cm (Depths with top LED lamp or cornice incl. lamp: see table page 177)


Hinge-door corner wardrobe 45°Interior fittings:1 fitted shelf without clothes rod 1 fitted shelf with clothes rod For production we require the detailsof series of assembly from left to right.


A20191LA20192R

G20191LG20192R

L20191LL20192R

R20191LR20192R

A40191LA40192R

G40191LG40192R

L40191LL40192R

R40191LR40192R

A05191LA05192R

G05191LG05192R

L05191LL05192R

R05191LR05192R

R

229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII

229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

–

–

–

–

–

IIIIII

A30191LA30192R

G30191LG30192R

L30191LL30192R

R30191LR30192R

A06191LA06192R

G06191LG06192R

L06191LL06192R

R06191LR06192R

–

A08191LA08192R

G08191LG08192R

L08191LL08192R

R08191LR08192R


Hinge-door corner wardrobe withfully accessible corner 90°Twin-door unitLeft-hand type (L): left 2 fitted shelvesand 1 clothes rod, each 106.7 cmwide; right 2 fitted shelves and 1 clothes rod, each 52.5 cm wide Right-hand type (R): interior fittings inreverse orderFor production we require the detailsof series of assembly from left to right.

L


The door hinges of any 1-door wardrobeunits included which are situated directlynext to the hinge-door corner wardrobewith fully accessible corner 90° must befitted on the side next to this hinge-doorcorner wardrobe!

Depending on the handle version, the door hinges of any 1-door wardrobe unitswhich are situated directly next to thehinge-door corner wardrobe 45° must befitted on the side next to this hinge-doorcorner wardrobe (exception: this is notnecessary when fitting handles 011, 012,013 and 026)!



Hinge-door corner wardrobes – Extension units

AP20191LAP20192R

AP40191LAP40192R

AP05191LAP05192R

AP30191LAP30192R

AP06191LAP06192R

AP08191LAP08192R

GP20191LGP20192R

GP40191LGP40192R

GP05191LGP05192R

GP30191LGP30192R

GP06191LGP06192R

GP08191LGP08192R

For each project please remember to leavea 2.0 cm gap to the ceiling and at the sidefor assembly!


193

MULTI-FORMA II




F20191LF20192R

366 3660 3661382

F40191LF40192R

366 3660 3661382

F05191LF05192R

367 3670 3671383

F30191LF30192R

366 3660 3661382

F06191LF06192R

367 3670 3671383

F08191LF08192R

367 3670 3671383





Design F

Hinge-door corner wardrobes – Extension units

FP20191LFP20192R

FP40191LFP40192R

FP05191LFP05192R

FP30191LFP30192R

FP06191LFP06192R

FP08191LFP08192R



LED spotlamps

(12 V; 1 W)

1 spotlamp per unit


(12 V; 2.4 W)

1 lamp per unit

Surcharge forpassepartoutA passepartout section cannot be fitted if the

hinge-door corner wardrobe extensionunit is included

as the lastunit

(= end ofwardrobe).

Surcharge for cornice withintegrated light panels

(230 V; 8 W)

1 lamp per unit




229.6 cm

high

268.0 cm

high

337.8 cm

high

670

680

690

aluminium colour chrome gloss

770

780

790


Accessories for the hinge-door corner wardrobe with fully accessible corner 90°

Fitted corner shelf2.3 cm thick

Fitted corner shelf2.3 cm thickwith clothes rods

Hinge-door corner wardrobes

Type no.

790531L790532R

790521L790522R


Centre partition

Surcharge for centre partition with integrated swing-out clothes rod

Centre partition 4.7 cm thick; clothes rod with clothes hooks in metal, optionally in aluminium colour or chrome gloss

Please note that the total width of the hinge-/folding-door wardrobes is increased by 2.7 cm when this centre partition is included.

Cannot be used as an outer side section, beside intermediate units with open compartment and intermediate unit 4, with interior TV fittings or beside hinge-doorcorner wardrobes.

Height reductions down to 201 cm without surcharge!

Centre partition

L

L

195

MULTI-FORMA II


Design versions for intermediate unitsDrawers and doors of the intermediate units are only available in Design A.

Front versions of glass design blind of intermediate unit 4:for lacquer versions: of rear-lacquered glass in the matching lacquer versionfor wood versions: optionally of rear-lacquered glass in pure white, white, wool white, sand or grey. Please state clearly in the order!Not available in high-gloss surface versions!

Intermediate units

Design and front versions for intermediate units

Allocation of handles to intermediate unitsThe MULTI-FORMA II intermediate units 1-4 have lower drawersthat are fitted with standard handles that match the adjacenthandles of the hinge-/folding-doors. Exceptions: if handle 032,033, 034, 035 or 031 is required for the adjacent hinge-/folding-doors, the drawers of the intermediate units 1-4 are fitted withknobs in the same version. The upper doors of the intermediateunits 1-3 are always supplied with knobs in the same version asthe handles of the adjacent hinge-/folding-doors (knobs for handle 031 in matt chrome).

1 2 3 4

If you choose handle 011 for the adjacent hinge-/folding-door wardrobes, the drawers of the intermediate unit auto-matically have the following handle:

matching version

If you choose handle 012 for the adjacent hinge-/folding-door wardrobes, the drawers of the intermediate unit auto-matically have the following handle:

If you choose handle 014/015 for the adjacent hinge-/folding-door wardrobes, the drawers of the intermediate unit automatically have the following handle:



If you choose handle 032/033, 034/035 or 031 for the adja-cent hinge-/folding-door wardrobes, the drawers of the inter-mediate unit automatically have the following handle:

For intermediate units 8 and 9 only the handles 029 and 030 are possible. Please statethe required handle version clearly in the order.

Intermediate units 6 and 7 are always fitted with the same handles as the adjacenthinge-/folding-doors. Exception: Handle 031 is not possible for intermediate unit 6. In thiscase please state the required handle version clearly in the order.

76 8 9



Intermediate unit 1 with vertical sliding-door and drawers102.2 cm wide

Intermediate unit 2 with doors and drawers80 cm wide

Interior TV unit fittings are possible, see page 199

Intermediate units

Surcharge for passe-partout

229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII

229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII

A021 364 3640 3641382

A022 348 3480 3481382

A122 348 3480 3481382

A722 348 3480 3481382

1

2

3 Intermediate unit 3 with doors and drawers100 cm wide

Interior TV unit fittings are possible, see page 199

229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII

A023 349 3490 3491382

A123 349 3490 3491382

A723 349 3490 3491382

Top: open compartments, 1 fitted wooden shelf(not adjustable), 1 fitted glass shelf; vertical sliding-door in front version, frame in carcaseversion (sliding-door with standard knobs);inside height: top compartment 63.2 cm; bottomcompartment 63.0 cm; inside width: 95.2 cm;inside depth: 51.5 cm

Bottom: 5 drawers (inside depth: 48.5 cm); see page 195 for handle versions

If a different wood/lacquer version is required forthe lower drawers compared to the top sliding-door, please state so in the order. When versionsfrom different price groups are exchanged, thehigher price group is always charged.

Intermediate unit 1 cannot be fitted directly next tothe hinge-door corner wardrobe with fully accessi-ble corner 90°!


Surchargefor cornicewith inte-grated LEDspotlamps

(12 V; 1 W)

1 spotlampper unit

Surchargefor top LEDlamp

(12 V; 2.4 W)

1 lamp per unit

Surchargefor cornicewith inte-grated lightpanels

(230 V; 8 W)

1 lamp per unit

Top: 2 doors with 2 fitted wooden shelves (door with standard knob);inside width: 78.0 cm; inside depth: 56.5 cm


If a different wood/lacquer version is required forthe lower drawers compared to the top hinge-doors, please state so in the order. When versionsfrom different price groups are exchanged, thehigher price group is always charged.

Top: 2 doors with 2 fitted wooden shelves (door with standard knob);inside width: 98.0 cm; inside depth: 56.5 cm


If a different wood/lacquer version is required forthe lower drawers compared to the top hinge-doors, please state so in the order. When versionsfrom different price groups are exchanged, thehigher price group is always charged.

Intermediate units are also possible on request as basic and end units or stand-alone units; exception: intermediate unit 1 is only suitable as an intermediate unit(between two wardrobe units). Two intermediate units can also be placed adjacentlyto one another (exception: intermediate unit 1 and 4). Height reductions (done on upper doors; not possible for intermediate unit 1 and 4) are possible down to a total height of 201 cm.Width reductions are generally not possible.Depth reductions are not possible for intermediate unit 1-4, 8 and 9.Drawers and doors of the intermediate units are only available in Design A.Please state the versions for the handles and the wardrobe interior fittings!

Design A


Surchargefor inte-grated LEDspotlamp

(2x 12 V; 3 W)

2 spotlampsper unit

(in open com-partment)

390

197

MULTI-FORMA II


Intermediate unit 6 with folding-door incl. integrated cabinet100 cm wide

A0271LA0272R

349 3490 3491382

A1271LA1272R

349 3490 3491382

Intermediate units


229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII

A024

6

229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII


(12 V; 1 W)

1 spotlampper unit


(12 V; 2.4 W)

1 lamp per unit


(230 V; 8 W)

1 lamp per unit



Design A

with 2 fitted wooden shelves and 1 clothes rod;inside width: 98.0 cm: inside depth: 56.5 cm

Folding-door incl. integrated cabinet (accessiblefrom inside, with black textile lining; including anecklace holder; the holder is fixed to the rearwall with Velcro tape; a watch and/or ring holderis possible as a further accessory that is chargedextra (see below);usable inside dims.: 34.4 cm high, 34.4 cm wide,6.0 cm deep)

A fitted shelf can not be included at the sameheight as the cabinet.

See page 195 for handle versions

If drawers and/or pull-out units from the wardrobeinterior fittings are included, these must be lessthan 98 cm wide for constructional reasons becauseof the folding-door (98 cm = inside width of inter-mediate unit).


L


Surchargefor inte-grated LEDspotlamp

(2x 12 V; 3 W)

2 spotlampsper unit

(in open com-partment)

390229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII

Intermediate unit 7 with rectangular door incl. cabinet100 cm wide

Not available with high-gloss fronts!

7

L

with 2 fitted wooden shelves and 1 clothes rod;inside width: 98.0 cm: inside depth: 56.5 cm

with 1 rectangular door with integrated cabinet(interior surface version in black lacquer, alsoavailable optionally in white lacquer; cabinetaccessible from inside; with 2 fitted glass shelves;usable inside dims.: 52.9 cm high, 33.7 cm wide,10.0 cm deep), frame of cabinet possible in allwood and lacquer versions, please state clearly inthe order; below 1 clothes rod and 3 hooks forbelts, handkerchiefs, etc.; 1 hinge-door

A fitted shelf can not be included at the sameheight as the cabinet.


L/R = rectangular door left/right

3620 3621

3620 3621

A0281 LA0282 R

A1281 LA1282 R

382

382

Accessories: Ring holder type 291Watch holder type 292

Intermediate unit 4 with electronic glass design blind incl. remote control and drawers100 cm wide

4

Top: 1 glass design blind with electronic driveand remote control (inside width: 94.5 cm; insidedepth: 35.8 cm); incl. cable aperture in rear wallFront versions of glass design blind:for lacquer versions: of rear-lacquered glass inthe matching lacquer version; for wood versions:optionally rear-lacquered in pure white, white,wool white, sand or grey. Please state clearly inthe order.Interior surface version behind glass design blind in white (also available optionally in black, please state clearly in the order)

Middle: open compartment (usable inside dims.:37.8 cm high, 98.0 cm wide, 56.5 cm deep)


Intermediate unit 4 cannot be fitted directly nextto the hinge-door corner wardrobe 45° or thehinge-door corner wardrobe with fully accessiblecorner 90°!



Intermediate unit 9 with cabinet band of BlackMagic glass100 cm wide

229.6 cm

high

IIIIII

268,0 cm

hoch

337.8 cm

high

IIIIII

IIIIII

A071 349 3490 3491382

A171 349 3490 3491382

A771 349 3490 3491382

268.0 cm

high

IIIIII

Intermediate unit 8 with cabinet band of clear glass100 cm wide A070

A170

A770

Intermediate units


8

9

229.6 cm

high

IIIIII

268.0 cm

high

337.8 cm

high

IIIIII

IIIIII


(12 V; 1 W)

1 spotlampper unit


(12 V; 2.4 W)

1 lamp per unit


(230 V; 8 W)

1 lamp per unit


with 2 full-length doors; centre area of clearglass, incl. 2 standard inside LED lamps; 12 V, 3 W; incl. footswitch; with 2 fitted wooden shelves above clear glass section; inside width: 95.8 cm, inside depth: 54.5 cm


with 2 full-length doors; centre area ofBlackMagic glass, incl. 2 standard inside LEDlamps; 12 V, 3 W; incl. footswitch; with 2 fittedwooden shelves above BlackMagic glass section;inside width: 95.8 cm, inside depth: 54.5 cm



Design A

349 3490 3491382

349 3490 3491382

349 3490 3491382


199

MULTI-FORMA II


Please observe the space requirements given by the electricaldealer (heat build-up)!

TV compartment including cable aperture in TV panel (usable inside dims.:68.1 cm high, 78.0 (or 98.0) cm wide, 35.5 cm deep; max. load: 60 kg) andwith flat screen support, ideally adaptable; 2 open compartments below forelectronic equipment (usable inside dims. per compartment: 10.0 cm high,35.0 (or 43.0) cm wide, 47.0 cm deep)

The flat screen support can be adjusted 3-dimensionally. It is suitable for81-165 cm (32”-65”) wide flat screens (please observe the usabledims. of the TV compartment; see above); max. load 45 kg.Go to www.vogels.com to check if your flat screen can be fitted on this flatscreen support. Enter the name EFW 6345. After a few steps you can seeif your flat screen TV is compatible with the flat screen support.

Please note:● When interior TV unit fittings are included, the wooden doors of the

intermediate units are fitted with 165° hinges ex-works. ● The 2 fitted wooden shelves, which are fitted standard in the

intermediate unit behind wooden doors, are omitted and the price has already been deducted.

● Because of the 165° hinges on the intermediate unit including the interior TV unit fittings, the door hinges of any 1-door wardrobe unitsincluded which are situated directly next to the intermediate unit must be fitted on the side next to this intermediate unit!

TV compartment including cable aperture in TV panel (usable inside dims.:68.1 cm high, 78.0 (or 98.0) cm wide, 35.5 cm deep; max. load: 60 kg); 2 open compartments below for electronic equipment (usable inside dims.per compartment: 10.0 cm high, 35.0 (or 43.0) cm wide, 47.0 cm deep)

Please note:● When interior TV unit fittings are included, the wooden doors of the

intermediate units are fitted with 165° hinges ex-works. ● The 2 fitted wooden shelves, which are fitted standard in the

intermediate unit behind wooden doors, are omitted and the price has already been deducted.

● Because of the 165° hinges on the intermediate unit including the interior TV unit fittings, the door hinges of any 1-door wardrobe unitsincluded which are situated directly next to the intermediate unit must be fitted on the side next to this intermediate unit!

Surcharge for interior TV unit fitting A

79611for 100 cmwide inter-mediate unit


Please observe the space requirements given by the electricaldealer (heat build-up)!

Surcharge for interior TV unit fitting B



Interior TV unit fittings for intermediate units 2, 3 and 4

Intermediate unitsFor each project please remember to leave a 2.0 cmgap to the ceiling and at the side for assembly!

for fitting on rear wall of intermediate unit behind glass design blind

The flat screen support can be adjusted 3-dimensionally. It is suitable for 81-165 cm (32”-65”) wide flat screens (please observe the usable dims. ofthe TV compartment; see above); max. load 45 kg.

Go to www.vogels.com to check if your flat screen can be fitted on this flatscreen support. Enter the name EFW 6345. After a few steps you can see ifyour flat screen TV is compatible with the flat screen support.

9205

Interior TV unit fittings A for intermediate units 2 and 3

Interior TV unit fittings B for intermediate units 2 and 3

Flat screen support, ideally adaptable, for intermediate unit 4


The modern, innovative MULTI-FORMA II wardrobe system is suitable for individual arrangements because it is particularly versatile.New front designs give MULTI-FORMA II its particularly exclusive look. As a universal wardrobe system, the design of MULTI-FORMA IIenables you to combine its units with all of the units in the various hülsta Bedroom ranges and almost every type of interior style.

Design idea

Quality features


Height reductions at intervals of 1 mm, width and depth

reductions at intervals of 1.0 cmwithout surcharge

(Height and width reductions notpossible for SOLIST).

MULTI-FORMA II Sliding-door wardrobes

You can choose from a variety of design versions for the MULTI-FORMA II sliding-door wardrobes:● Design A ● Design M ● Design G● Design L● SOLISTThe various wood/lacquer versions and high-gloss versions (exclusively for fronts) underline the versatility of the MULTI-FORMA IIwardrobe system.

You can also choose from a variety of versions for the wardrobe interior fittings for the MULTI-FORMA II sliding-door wardrobes:● White lacquer (standard)● Light interior veneer ● Dark interior veneerPlease state exactly in the order, in which version you require the interior fittings for your wardrobe. If no details of the version are given in the order, the interior fittings are delivered in the standard white lacquer version.

● Doors in Design A and M with optional mirror ● Optional: - with top LED lamp (12 V; 2.4 W)

- with cornice and integrated LED spotlamps (12 V, 1 W)- with cornice and integrated light panels (230 V, 8 W)The lights are operated by a standard external footswitch.

● Wardrobe inside widths: 78, 88, 98, 108, 118, 133, 148 cm● The wardrobe outer widths are calculated by adding 2 cm to the inside widths for each partition and side section; another 1.0 cm

must be added for the side protrusion when a cornice is fitted● Two different basic wardrobe heights: 229.6 cm and 268.0 cm● MULTI-FORMA II is variable: height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without

surcharge (height and width reductions not possible for SOLIST).● Wardrobe outside depth (incl. profiled handle): 67.6 cm● Wardrobe inside depth: 56.0 cm● Functional and high-quality wardrobe interior fittings (see separate "Wardrobe interior fittings" chapter) ● Standard interior fittings per unit: 2 fitted shelves, 1 clothes rod

● All wardrobe doors with cushioning mechanism and brush seals● Innovative door guiderail bracket● Unobtrusive 2.5 mm size holes● Low plinth with trapezoid-shaped brackets for simple assembly● All partitions and side sections have a special plinth adjustment device which makes exact horizontal and vertical assembly

much easier● hülsta-SoftGlide: Doors of sliding-door wardrobes with air-cushioned auto pull-in feature

201

MULTI-FORMA II


Wardrobe examples for sliding-door wardrobes; lamps

● Mirror fronts for doors in Design A and M at a surcharge● Cornice and lamps at a surcharge● Top LED lamps at a surcharge● 2 different basic heights: 229.6; 268.0 cm● Wardrobe outside widths: 162, 182, 202, 222, 242, 272, 302, 322, 342, 362, 382, 402 cm● Unit inside widths: 78, 88, 98, 108, 118, 133, 148 cm● Outside depth: 67.6 cm● Inside depth: 56.0 cm

For calculating the total width when fitting a cornice with lamp, please note the protrusion of 0.5 cm left and right!

Sliding-door wardrobe in 229.6 cm height

Sliding-door wardrobe in 268.0 cm height

Lamps

Remote control unitSurcharge for remote control unit (transmitter + receiver) type 379 = Surcharge for extra transmitter type 3791 = Surcharge for extra receiver type 3792 =

4-channel remote control unit is also possible(see chapter "Switch options for lamps")!

Cornice with integrated LED spotlampsSurcharge for each additional spotlamp type 369 = Price reduction for one spotlamp type 368 = (if not required in cornice)

Cornice with integrated light panelsSurcharge for each additional light panel type 3681 = Price reduction for one light panel type 3680 = (if not required in cornice)

Top LED lampSurcharge for each additional lamp type 3691 =

All sliding-door wardrobes are available with an optional cornice and LED lamps or witha top LED lamp. Either one integrated LED spotlamp (12 V, 1 W), one light panel (230 V,8 W) or one top LED lamp (12 V, 2.4 W) is fitted standard above each unit. Exception: inthe case of the SOLIST, the cornice has no integrated LED spotlamp or light panel abovethe middle door.It is also possible to remove individual spotlamps or light panels with a price reduction.Please include a sketch in all cases.Switching is done standard by an external footswitch. A remote control unit is also avail-able as an alternative, which is charged extra. The remote control unit incorporates atransmitter, with which the entire cornice lighting can be switched on and off. Extratransmitters are available at a surcharge. The footswitch is omitted when the remotecontrol unit is employed.


Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge; when reducing the height of doors in Design L only the top and bottom door panels are reduced in height (the middle panels always retain their original height); height and width reductions not possible for SOLIST.

see pages 204-211Widths

Depths (incl. profiled handle)

Heights

with cornice incl. lamp

see sizes without cornice + 4.8 cm

71.3 cm

with top LED lamp

see sizes without cornice + 5.0 cm

72.0 cm

without cornice

67.6 cm

229.6 and 268.0 cm

Dims.


Lists of versions for sliding-door wardrobes

Design versions for wardrobe doors Design A Design M Design G Design L SOLIST


Version

973974975

Model no.

Versionswardrobe interior fittingsWith the MULTI-FORMA II sliding-door wardrobes you canchoose between three versions for the wardrobe interior fit-tings. The desired version must be stated in the order. If nodetails are given in the order, the wardrobe interior fittings aresupplied in white lacquer.

MULTI-FORMA II sliding-door wardrobes can only be supplied with profiled handles in different optional lacquer versions (exception: sliding-door wardrobes in Design M and sliding-doors in a wooden version always with standard aluminium-coloured handles). Please be sure to state the required version in the order!

Profiled handle versions

With the MULTI-FORMA II sliding-door wardrobes you can choose the carcase and the front in a different version.Please state this clearly in the order. When versions from different price groups are exchanged, the higher pricegroup is always charged.

Lacquer

High-gloss

Veneer

Wood/lacquer/high-gloss versions – Design A





IIII

IIIIIIII

IIIIIIIIII


Pure white lacquer*White lacquer*Sand lacquer*Grey lacquer*

Aluminium colourAluminium colourAluminium colourAluminium colourAluminium colour

* The carcase and the profiled handle for high-gloss fronts are in matt lacquer in the matching colour.

Profiled handle

Lacquer

High-gloss

Veneer

Wood/lacquer/high-gloss versions – Design M




Structured beechNatural oakLight brown ashCore walnut

IIII

IIIIIIII

IIIIIII

Aluminium colour


Profiled handle

S01S63S02S03

S05S06S07S64

S09S65S11S12S13

S14S66S15S16

S18S19S20S67

S22S68S24S25

203

MULTI-FORMA II


Lacquer

Veneer

Lacquer

High-gloss

Veneer

Wood/lacquer/high-gloss versions – Design G










Aluminium colourAluminium colourAluminium colourAluminium colourAluminium colour


Profiled handle

IIII

IIIIIIII

IIIIIIIIII

VeneerHigh-gloss

Wood/lacquer/high-gloss versions – Design L



Pure white lacquerWhite lacquerSand lacquerGrey lacquer

Structured beech**Natural oak**Light brown ash**Core walnut**Cherrywood gold**




The carcase is available in all the different versions (see e.g. Design G). Please state clearly in theorder! If the carcase is required in Cherrywood gold, price group III is charged.

Profiled handle

IIIIIIII

Lacquer

Lacquer

High-gloss

Veneer

Wood/lacquer/high-gloss versions – SOLIST




Light brown ashCore walnut

Light brown ashCore walnut




Aluminium colourAluminium colour


Profiled handle

IIII

IIIIIIII

IIII

Veneer

** If the application is required in a wooden version, the side handles are always suppliedin the same colour as the fronts.

With the MULTI-FORMA II sliding-door wardrobes you can choose the carcase and the front in a different version. Please state this clearly in the order. When versions from different price groups are exchanged, the higher price group is always charged.

Changing versions

S26S69S27S28

S30S31S32S70

S48S71S50S51S52

S26S69S27S28

S48S71S50S51S52

S34S35S36S72

S62S53S54S55

S57S73S59S60S61

S38S74S39S40

S42S43S44S75

S46S47

S46S47


268.0 cm

high

IIIIII

229.6 cm

high

IIIIII

A52162

268.0 cm

high

IIIIII

229.6 cm

high

IIIIII

268.0 cm

high

IIIIII

229.6 cm

high

IIIIII

268.0 cm

high

IIIIII

229.6 cm

high

IIIIII

Sliding-door wardrobesFor each project please remember to leave a 10.0 cm gap betweenwardrobe carcase and the ceiling and 2.0 cm at the side for assembly!

Design A Design M

A62162

A52182

A62182

A52202

A62202

A52222

A62222


Height: 229.6 and 268.0 cm (Heights with top LED lamp or cornice incl. lamp: see table page 201)Width: see table (Widths with cornice: + 0.5 cm each side)Depth: 67.6 cm (Depths with top LED lamp or cornice incl. lamp: see table page 201)Inside depth: 56.0 cm

Interior fittings per unit: 2 fitted shelves, 1 clothes rod

Height reductions at intervals of 1 mm, width and depth reductions atintervals of 1.0 cm without surcharge.When reducing the height of doors in Design L only the top and bottomdoor panels are reduced in height (the middle panels always retain theiroriginal height). Height and width reductions are not possible on theSOLIST.

Cornice is full-length up to 302 cm width.Not available with passepartout unit!

G52162

Design G

G62162

G52182

G62182

G52202

G62202

G52222

G62222

With SOLIST thecornice has nointegrated LEDspotlamp abovethe middle door.

With SOLIST thecornice has nointegrated lightpanel above themiddle door.

205

MULTI-FORMA II


Please also note the functional andhigh-quality wardrobe interiorfittings as well as the special articles and possible special-sized products in the separatechapters on "Wardrobe interior fittings" and "Special products".

3110 31110383


L52162

–

SOLISTDesign L

3110 31110383L62162

–

3120 31210383L52182

–

3120 31210383L62182

–

3130 31310383L52202

–

3130 31310383L62202

–

3140 31410383L52222

–

3140 31410383L62222

–


Surcharge for cornice withintegrated LED spotlamps

(12 V; 1 W)

1 spotlamp per unit


(230 V; 8 W)

1 lamp per unit

Surcharge fortop LED lamp

(12 V; 2.4 W)

1 lamp per unit

for Design A,M, G and L

for SOLIST for Design A,M, G and L

for SOLIST

Please markexactly in the front sketch, or state in the order (from theleft), which sliding-doorsare to be fitted with a mirror.

Surcharge for mirror per sliding-door:

Surcharge for mirror:Each wardrobe door in Design A oreach sliding-door panel in Design Mcan be fitted with an optional mirrorwhich is charged extra (mirrors notpossible for Design G, L and SOLIST).

for Design A for Design M

Please markexactly in thefront sketch, or state in theorder (from theleft), which sliding-doorpanels are tobe fitted with a mirror.

Surcharge for mirror persliding-doorpanel:


268.0 cm

high

IIIIII

229.6 cm

high

IIIIII

M52242

–

268.0 cm

high

IIIIII

229.6 cm

high

IIIIII

268.0 cm

high

IIIIII

229.6 cm

high

IIIIII

268.0 cm

high

IIIIII

229.6 cm

high

IIIIII


Design A Design M

A53242

A63242

M52272

–

A53272

A63272



Design G

G53242

G63242

G53272

G63272

For each project please remember to leave a 10.0 cm gap betweenwardrobe carcase and the ceiling and 2.0 cm at the side for assembly!







(12 V; 1 W)

1 spotlamp per unit


(230 V; 8 W)

1 lamp per unit


(12 V; 2.4 W)

1 lamp per unit



for SOLIST

207

MULTI-FORMA II



3150 31510383


SOLISTDesign L

S53242

–

3160 31610384L53242

–

S63242

–

3160 31610384L63242

–

3170 31710383

S53272

–

3180 31810384L53272

–

S63272

–

3180 31810384L63272

–


S3160

S3160

S3180

S3180

S3161

S3161

S3181

S3181








268.0 cm

high

IIIIII

229.6 cm

high

IIIIII

M52302

–

268.0 cm

high

IIIIII

229.6 cm

high

IIIIII

268.0 cm

high

IIIIII

229.6 cm

high

IIIIII

268.0 cm

high

IIIIII

229.6 cm

high

IIIIII


Design A Design M

A53302

A63302

A54322

A64322

A53332

A63332



Design G

G53302

G63302

G54322

G64322

G53332

G63332








(12 V; 1 W)

1 spotlamp per unit


(230 V; 8 W)

1 lamp per unit


(12 V; 2.4 W)

1 lamp per unit



for SOLIST


209

MULTI-FORMA II


3190 31910383


SOLISTDesign L

S53302

–

3200 32010384L53302

–

S63302

–

3200 32010384L63302

–

3210 32110385L54322

–

3210 32110385L64322

–

S53332

–

3220 32210384L53332

–

S63332

–

3220 32210384L63332

–


S3200

S3200

S3220

S3220

S3201

S3201

S3221

S3221








268.0 cm

high

IIIIII

229.6 cm

high

IIIIII

A54402 G54402

A64402 G64402

268.0 cm

high

IIIIII

229.6 cm

high

IIIIII

A54382 G54382

A64382 G64382

268.0 cm

high

IIIIII

229.6 cm

high

IIIIII

268.0 cm

high

IIIIII

229.6 cm

high

IIIIII

G54342

G64342

G54362

G64362

A54342

A64342

A54362

A64362


Design A Design GDesign M










(12 V; 1 W)

1 spotlamp per unit


(230 V; 8 W)

1 lamp per unit


(12 V; 2.4 W)

1 lamp per unit



for SOLIST


211

MULTI-FORMA II


3300 33010385L54402

–

3300 33010385L64402

–

3280 32810385L54382

–

3280 32810385L64382

–

3240 32410385L54342

–

3240 32410385L64342

–

3250 32510385L54362

–

3250 32510385L64362

–


SOLISTDesign L









Electrical opening system for sliding-door wardrobes

Electrical opening system for 2-door sliding-door wardrobes



3010

3020

3030

Possible arrangements

Electrical opening system for sliding-door wardrobesThe sliding-door wardrobes can also be fitted with an optional electrical opening system.The sliding-door then opens or closes automatically when pushed slightly.Open sliding-doors will close automatically after approx. 2 minutes.

Special sizes for sliding-door wardrobes with electrical opening system:Height reductions are possible down to max. 180 cm height.For reasons of appearance, we also do not recommend the wardrobe being reduced below eye-level height.Width reductions are generally not possible.Depth reductions are possible down to max. 20 cm wardrobe depth.

The electrical opening system is not possible when a reversed sliding-door wardrobe is required.The centre sliding-door can only be opened to the left in the case of 3-door sliding-door wardrobes with electrical opening system.


213

MULTI-FORMA II


To enhance the competency of the range, MULTI-FORMA II now also includes a walk-in room system which incorporates all the key performance features (planning, surface versions,special sizes, etc.) of the previous carcase system. Furthermore, this room/niche system also provides a separate system of fronts. In this way, small niche combinations and evenmagnanimous room systems can be created individually.The tried and tested planning system from MULTI-FORMA II involving basic and extension units has been incorporated in the room/niche system. This guarantees a simple and com-fortable initiation to the range including easy planning. As a universal wardrobe system, the design of MULTI-FORMA II enables you to combine its units with all of the units in thevarious hülsta Bedroom ranges and almost every type of interior style.

Design idea The MULTI-FORMA II room and niche system is only available with sliding-doors in Design A in different optional wood/lacquer andhigh-gloss versions. The sliding-doors are fitted with a shell handle, optionally in matt or high-gloss chrome.

You can also choose from a variety of versions for the wardrobe fittings for the MULTI-FORMA II room and niche system:● White lacquer (standard)● Light interior veneer ● Dark interior veneerPlease state exactly in the order, in which version you require the fittings for your wardrobe. If no details of the version aregiven in the order, the fittings are delivered in the standard white lacquer version.

● Open carcase units that can all be combined at will● Carcase inside widths: 38, 48, 78, 98, 158, 198 cm● Carcase height: up to max. 268.0 cm● Total depth: 59.0 cm● Inside depth: 56.0 cm● MULTI-FORMA II is variable: height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without

surcharge● Partitions and side sections with optional LED lamps; standard operation by remote control unit● Corner carcase units (45° and with fully accessible corner 90°)

● Hidden aluminium construction manufactured from extremely solid hexagonal material● Sliding-doors with cushioning device on one or both sides, incl. aluminium top and bottom guide rails ● All sliding-doors with cushioning bracket and brush seals● Innovative door guiderail bracket ● Unobtrusive 2.5 mm size holes● Low plinth with trapezoid-shaped brackets for simple assembly● All partitions and side sections have a special plinth adjustment device which makes exact horizontal and vertical assembly

much easier● Functional and high-quality wardrobe interior fittings (see separate "Wardrobe interior fittings" chapter) ● Standard fittings: 2 fitted shelves, 1 clothes rod

Quality features


MULTI-FORMA II Room and niche system


Lists of versions room and niche system

Design version for sliding-doorsDesign A


Version

973974975

Model no.

Versionswardrobe fittings With the MULTI-FORMA II room and niche system you canchoose between three versions for the wardrobe fittings. Thedesired version must be stated in the order. If no details aregiven in the order, the wardrobe fittings are supplied in whitelacquer.

Wood/lacquer/high-gloss versions – Design A

Model no. Front* Price group


High-gloss pure whiteHigh-gloss whiteHigh-gloss sandHigh-gloss grey


IIII

IIIIIIII

IIIIIIIIII

Shell handle

037 Matt chrome(standard handle)038 Glossy chrome

* Sliding-doors are surrounded by aluminium profiles at the sides.

The MULTI-FORMA II room and niche system can only be supplied with integrated shell handles,optionally in glossy or matt chrome. Please be sure to state the required version in the order! If noversion is stated in the order, shell handle 037 (matt chrome) is supplied ex-works.

Versions of shell handle

Model no. Carcase

973

974975


Design A

Lacquer

High-gloss

Veneer

R01R14R02R03

R05R06R07R15

R09R16R11R12R13

215

MULTI-FORMA II


Room and niche system - Room situations

Room situations - Examples of use/floorplansWith the MULTI-FORMA II room and niche system it is possible to fit out the units individually according to their particular use in the home. Different room arrangements, forexample for niches or sloping ceilings, can be designed practically. Rooms can even be divided or a walk-in wardrobe can be created: the possible uses of the MULTI-FORMA IIroom and niche system are almost unlimited!

Niche Walk-in wardrobe Room divider


Walls absolutely vertical= everything O.K.

Example 7Walls are not vertical = wall fitting profiles must be ordered

Example 8

O.K. Not O.K.:Wall fitting profiles must be ordered (see page 223)

Floor absolutely horizontal= everything O.K.

Example 1Floor (with absolutely horizontal ceiling) hasmax. 8 mm height difference per metre length= everything O.K.

Example 2Floor has more than 8 mm height difference per metre length= this difference must be equalised effectively on-site. If both the floorand ceiling betray differences in height, the sum of these height differencesper metre length must not exceed 8 mm.

Example 3

Ceiling (with absolutely horizontal floor) has max. 8 mm height difference per metre length = everything O.K.

Ceiling has more than 8 mm height difference per metre length= a ceiling fitting profile must be ordered. If both the floor and ceilingbetray differences in height, the sum of these height differences permetre length must not exceed 8 mm.

Example 6

O.K. O.K. Not O.K.:Difference must be balanced effectively on-site

O.K. O.K. Not O.K.:A ceiling fitting profile must be ordered (see page 223)

If the on-site situation has been clarified (also see the following page), the required dimensions must be calculated.The situation/view is the key here.

right-angledView 1

with 1 or 2 slopesView 2

1.) Floor

2.) Ceiling

3.) Walls

Ceiling absolutely horizontal= everything O.K.

Example 4 Example 5

Technical notes on room and niche system

217

MULTI-FORMA II


3.) Walls

The walls must be checked to see if they are vertical using a spirit level. The walls must be absolutely vertical (see example 7). If they are not, wall fitting profiles must be ordered(against a surcharge; see example 8 and page 223). Width of wall fitting profile: 50 mm. It can be adjusted by 25 mm (i.e. max. 75 mm wide).

Slight irregularities in the walls, warping, etc. must be equalised during assembly (e.g. with acrylic material).

The on-site situation must be checked before you can calculate the individual sizes of the furniture units.

1.) Floor

The floor must be checked to see if it is horizontal using a spirit level. An absolutely horizontalfloor (see example 1) is best. The MULTI-FORMA II room and niche system, however, will permitheight differences in the floor of a maximum 8 mm per 1 m length (i.e. 16 mm for a max. widthof 2 m, 24 mm for a max. width of 3 m, etc.; see example 2). The various maximum tolerancescannot be added up.

If the maximum tolerance value of 8 mm per 1 m length is exceeded (see example 3), this difference must be equalised suitably on-site.

Please be sure to state in your order what the floor material is. On solid floors (e.g. on tiles, parquet flooring, laminate) the floor rail with the runner bracket is fitted directly on to the floor.In the case of soft floors, like for example carpets, these must be cut out on-site and the floorrails must then be laid. The floor rail with the running bracket is always supplied in oversize andhas to be cut to requirements on site.

2.) Ceiling

The ceiling must be checked to see if it is horizontal using a spirit level. An absolutely horizon-tal ceiling (see example 4) is best. The MULTI-FORMA II room and niche system, however, willpermit height differences in the ceiling of a maximum 8 mm per 1 m length (i.e. 16 mm for amax. width of 2 m, 24 mm for a max. width of 3 m, etc.; see example 5). The various maximumtolerances cannot be added up.

If the maximum tolerance value of 8 mm per 1 m length is exceeded, a ceiling fitting profile mustbe ordered (against a surcharge; see example 6 and page 223). Height of ceiling fitting profile: 50 mm. It can be adjusted by 25 mm (i.e. max. 75 mm high). When using the fitting profile, please state the true ceiling height. Slight irregularities in the ceiling surface, warping, etc. must be equalised during assembly (e.g. with acrylic material).

The fitting profile is mounted on the ceiling. It is always supplied in oversize and has to be cutto requirements on site.

Height 1 Height 2 Height 3 Please measure height 1 and height 3 in each corner

Width 1

Width 2

Width 3

Measuring heights Measuring widths

Height 1Height 2

Height 3

Width 1

Width 2

Width 3

Length 1

Measuring sloping ceilings

Please state all measurements in millimetres. Warm corners must be straightened on-site before measuring. Please always check all walls for quality and to see if they are exactly straight.

max. 8 mmon 1 m

max. 16 mm on 2 m

max. 24 mm on 3 m

max. 32 mm on 4 m

Maximum tolerances

Important notes: Generally speaking, you as a dealer/qualified fitter are responsible for the correct wall mounting of the units. That is why wall mounting should only be carried out by properly trained andqualified fitters. hülsta supplies materials for mounting units on walls for nearly all the units and which should be used for safety and for constructional reasons. The assembly materials supplied by hülsta (plugs, screws)are only suitable for fitting components on to concrete in firmness class (C12/15).For other materials (please see separate materials table in the wall composition chapter) we provide you with an assembly mortar set as an extra order. Please note that this assembly mortar set is also onlysuitable for the materials listed in the materials table.If walls are made up of other materials (e.g. plastered or lighter wall materials), one should use another method of mounting better suited to the load on site.Please note that if the units are not mounted properly on the wall, there is a risk of the units falling down or tipping over – especially when alternative mounting materials acquired on site have been used.For the reasons stated above it is absolutely essential to enquire about the composition of any walls before signing any contracts.


List of versions: see page 214Room and niche system

Open carcase basic unitswith 2 outer side-sections (each 2 cm thick)

Interior fittings per unit:2 fitted shelves, 1 clothes rod

Open carcase units optionally in white lacquer(standard), light interior veneer or dark interiorveneer. Please state clearly in the order!

For each wardrobe combination, the first element on theleft is considered to be the basic unit, incorporating bothouter side-sections. One can only include one basic unitin each combination. When adding on extension units,the right-hand side-section of the basic unit is employedas the end side-section of the complete combination.

Open carcase unit,42 cm wide






max. 268.0 cm high

204

max. 268.0 cm high

max. 268.0 cm high

max. 268.0 cm high

max. 268.0 cm high

max. 268.0 cm high

205

208

Height: max. 268.0 cm Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge.Width: see tableTotal depth: 59.0 cmInside depth: 56.0 cm

210

216

220

2219

Open carcase unit with fully accessible corner 90°,112.7 x 112.7 cm wide

26191 L26192 R

max. 268.0 cm high

max. 268.0 cm high

Left-hand type (L): left 2 fitted shelves and 1 clothes rod,each 106.7 cm wide; right 2 fitted shelves and 1 clothesrod, each 52.5 cm wide Right-hand type (R): interior fittings in reverse order

For production we require the details of series of assembly from left to right.

Interior fittings:1 fitted shelf without clothes rod 1 fitted shelf with clothes rod For production we require the details of series of assemblyfrom left to right.

Open corner carcase unit 45°,97.3 x 97.3 cm wide

L



219

MULTI-FORMA II


Open carcase extension unitswith 1 centre partition (2 cm thick)

Interior fittings per unit:2 fitted shelves, 1 clothes rod

Open carcase units optionally in white lacquer(standard), light interior veneer or dark interiorveneer. Please state clearly in the order!

Room and niche system







max. 268.0 cm high

max. 268.0 cm high

max. 268.0 cm high

max. 268.0 cm high

max. 268.0 cm high

max. 268.0 cm high

Height: max. 268.0 cm Height reductions at intervals of 1 mm, width and depth reductions at intervals of 1.0 cm without surcharge.Width: see tableTotal depth: 59.0 cmInside depth: 56.0 cm

0204

0205

0208

0210

0216

0220

Open carcase unit with fully accessible corner 90°,110.7 x 112.7 cm wide

026191 L026192 R

Open corner carcase unit 45°,95.3 x 97.3 cm wide

02219

Left-hand type (L): left 2 fitted shelves and 1 clothes rod,each 106.7 cm wide; right 2 fitted shelves and 1 clothesrod, each 52.5 cm wide Right-hand type (R): interior fittings in reverse order

For production we require the details of series of assembly from left to right.

Interior fittings:1 fitted shelf without clothes rod 1 fitted shelf with clothes rod For production we require the details of series of assemblyfrom left to right.

L

For each wardrobe combination, the first element on theleft is considered to be the basic unit, incorporating bothouter side-sections. One can only include one basic unitin each combination. When adding on extension units,the right-hand side-section of the basic unit is employed as the end side-section of the complete combination.

max. 268.0 cm high

max. 268.0 cm high




Room and niche system for hard floors (e.g. tiles, parquet)

max. 272.6 cm high

IIIIII

A2181 LA2182 R

max. 272.6 cm high

max. 272.6 cm high

max. 272.6 cm high

max. 272.6 cm high

Front incl. top and bottom guide rails1 sliding-doorFront width: min. 60.0 cm, max. 110.0 cmRequired total width: min. 120.0 cm, max. 220.0 cm

Height: max. 272.6 cm Height reductions at intervals of 1 mm, width reductions at intervals of 1.0 cm without surcharge.Width: see table

Front incl. top and bottom guide rails2 sliding-doorsFront width and required total width: min. 117.0 cm, max. 217.0 cm




from 60.0 to 93.0 cm from 93.1 to 110.0 cm

A3181 LA3182 R

A2230 A3230

A2345 A3345

A2372 A3372

A2460 A3460

Design AFronts – Sliding-doorsFronts: 3.5 cm thickSliding-doors with cushioning bracket at one or both sides (depending on width of sliding-doors);incl. top and bottom guide rails (aluminium profile):- The guide rails are always supplied in oversize and have to be cut to requirements on site- The top guide rail must be screwed onto the ceiling and the bottom guide rail fixed (glued) to the floor - A ceiling fitting profile is always used for sloping ceilings (possible from 30°)

with door cushioningone side

with door cushioningboth sides

Front width

Total width from 120.0 to 186.0 cm from 186.1 to 220.0 cm

from 117.0 to 183.0 cm from 183.1 to 217.0 cmFront and total width




L L/R = left/right

Single-rail

Twin-rail

Triple-rail

Twin-rail

List of versions: see page 214

Please mark exactly in the frontsketch, or state inthe order (from theleft) which sliding-doors are to be fit-ted with a mirror.


Surcharge for mirror:Each sliding-door canbe fitted with an optional mirror which is charged extra.

Twin-rail

IIIIII

Front and total width


IIIIII

IIIIII


IIIIII


221

MULTI-FORMA II


Room and niche system for carpets

max. 273.0 cm high

A21811 LA21812 R

max. 273.0 cm high

max. 273.0 cm high

max. 273.0 cm high

max. 273.0 cm high

Front incl. top and bottom guide rails1 sliding-doorFront width: min. 60.0 cm, max. 110.0 cmRequired total width: min. 120.0 cm, max. 220.0 cm

Height: max. 273.0 cm Height reductions at intervals of 1 mm, width reductions at intervals of 1.0 cm without surcharge.Width: see table





A31811 LA31812 R

A22301 A32301

A23451 A33451

A23721 A33721

A24601 A34601

Design AFronts – Sliding-doorsFronts: 3.5 cm thickSliding-doors with cushioning bracket at one or both sides (depending on width of sliding-doors);incl. top and bottom guide rails (aluminium profile):- The guide rails are always supplied in oversize and have to be cut to requirements on site- The top guide rail must be screwed onto the ceiling and the bottom guide rail fixed (glued) to the floor - A ceiling fitting profile is always used for sloping ceilings (possible from 30°) Please note: The carpet must be cut out to requirements on site and the bottom guide rail fitted.

with door cushioningone side

with door cushioningboth sides

L L/R = left/right

Single-rail

Twin-rail

Triple-rail

Twin-rai

Please mark exactly in the frontsketch, or state inthe order (from theleft) which sliding-doors are to be fit-ted with a mirror.


Surcharge for mirror:Each sliding-door canbe fitted with an optional mirror which is charged extra.

Twin-rail

IIIIII

from 60.0 to 93.0 cm from 93.1 to 110.0 cmFront width

Total width from 120.0 to 186.0 cm from 186.1 to 220.0 cm

from 117.0 to 183.0 cm from 183.1 to 217.0 cmFront and total width




IIIIII



IIIIII

IIIIII


IIIIII



Accessories for room and niche system

LED lamp for partitions and outer side sectionsfor fitting on partitions or outer side sections of open carcase units.In this case the total depth increases by 2.5 cm.LED lamp, 12 V, 7 or 14 W, incl. remote control unit

The LED lamps are fitted all along the front of the carcase sides and shine to the side (when fitted on outer side sections they shine to one side, when fitted on partitions to both sides).

Room divider “storage island”usable both sides

Width: 148.0 cmHeight without glass bonnet: 71.5 cmTotal height: 85.3 cmDepth: 70.0 cm

Front side: 6 drawers with cushioned auto pull-in feature as fully pull-out units, with extra stained glass surface at topRear side: 4 shelf compartments below a bench with high-quality seat upholstery in genuine black leather, 100% Nappa leather, pigmented

Room divider "storage island" optionally in white lacquer (standard), light interior veneer or dark interior veneer. Please state clearly in the order!

520

298299

LED lamp for fitting on partitions; 14 W

LED lamp for fitting on outer side sections; 7 W

GENUINELEATHER

Front side:

Rear side:

Illustration:LED lamp on partition(illuminates both sides)

Usable dims. (per open compartment):Height: 15.4 cmWidth: 68.0 cmDepth: 32.5 cm


List of versions: see page 214



223

MULTI-FORMA II



Wall or ceiling fitting profile

28922891

Single-rail

2893

Twin-rail Triple-rail

Wall or ceiling fitting profileFitting profiles must be used for each wall and/or ceiling if the walls are not exactly vertical and/or the ceiling not straight and they exceed the maximum tolerance of 8 mm per1 m length (also see page 217). The illustrated fitting profile is used both for the walls as well as for the ceiling. The fitting profiles are used to equalise the distance betweenthe top and bottom guide rails to the wall and between the top guide rail to the ceiling. They are always supplied in oversize and have to be cut to requirements on site. They arecharged per 10 cm metre length or part thereof. Fitting profiles must be ordered for each wall and ceiling that is not straight (beyond the maximum tolerances).Height of fitting profile: 50 mm. It can be adjusted by 25 mm (i.e. max. 75 mm high).When using the fitting profiles, please state the true ceiling height!

A

Wall or ceiling fitting profilePrice per 10 cm length or part thereof

A A

Wall or ceiling fitting profile Examples of use

Equalising height to ceiling

Equalising distance to wall

50-75 mm

50-75 mm

Fitting profile

Topguiderail

Door

50-75 mm

Side slopingEvery sliding-door in the room and niche system can be sloped at the side. The following points must be noted:

- If width A (see sketch 1) exceeds/equals 55.0 cm, the door is still supplied as a sliding-doorSurcharge for side sloping per sliding-door (as sliding-door) type 9994

- If width A (see sketch 2) is less than 55.0 cm, the door is supplied as a fixed unit Surcharge for side-sloping per sliding-door (as fixed unit) type 9995

- If width A (see sketch 3) is less than 55.0 cm - but the door is still meant to be used as a sliding-door - a support rail and fitted shelves must be ordered extra. This railcan only be fitted on the front side of open carcase units in front of a full-length row of fitted shelves. In this case the sliding-door can not be used as a room divider. The support rail is charged per 10 cm length or part thereof. One fitted shelf must be ordered for every open carcase unit included. A one-sided cushioning bracket is usedup to 55.0 cm width A.Surcharge for side sloping of sliding-door type 9996Surcharge for support rail (per 10 cm length or part thereof) type 9997Surcharge for fitted shelf (per each open carcase unit) type type 79000

We recommend getting in touch with hülsta before ordering in order to sort out technical details.

Sketch 1 Sketch 2 Sketch 3

multi-forma ii room for unlimited possibilities hinge-door...

Documents