much lighter and easy installation. its no camera window design … printed circuit board layout...
TRANSCRIPT
Printed circuit board layout patterns can be seen through the printed letters or resist layer.
Silk print on the circuit board can be seen clearly.
•Space-saving design allows situations where installation locations are restricted.•Because there is no camera window, the entire aperture can be captured as a field of view.•Workpieces can be photographed from a close distance without troublesome reflected lighting.
IDU-C150IFHA-100
127mm
Space-savingdesign
-119mm
8mm
Much lighter and easy installation. Its no camera window design realizes wide field of view
The printing can clearly be seen, and that makes inspection of blurring of printing easy.
Transparency of the acrylic is greatly improved
Composite configuration of different luminescent colors can be produced by customization
IFH-200/200DW IFHA-200WHVLuminance distribution(LWD=10mm) Luminance distribution(LWD=10mm)
Significant improvement in uniformity
Our improved light guide plate realizes more than tripled illuminance compared to conventional products of the same size.
Compared to existing model, it is approximately 6 times brighter(white)
The barcodes can be clearly seen. That makes recognition of space between codes and width of them easy.
IFH-150/150DW(Existing model) IFHA-150W
Object: a package of coffee
Camera:monochrome cameraUSB3.0Shutter speed:1/1000 Lens:25mmAperture:6
Camera:monochrome cameraUSB3.0Shutter speed:1/1000 Lens:25mmAperture:4
Barcode
Printing
Y Axis (m
m)
X Axis (mm)
100
50
0
-50
-100
-100 -50 0 50 100
Y Axis (m
m)
X Axis (mm)
-100 -50 0 50 100
100
50
0
-50
-100
IFH-100/100DW
IFHA-100W
0% 200% 400% 600% 1200% 1400%
NEW
IFH-100/100R
IFHA-100RNEW
Existingmodel
Existingmodel
Existingmodel
Existingmodel
IFH-100/100B
IFHA-100BNEW
IFH-100/100AIR-850
IFHA-100IR-850NEW
Approx. 6x brighter
Approx. 5x brighter
Approx. 15x brighter
Approx. 3x brighter
NEW
By customizing, two-color model is available.This customization makes it enable to emphasis the features of objects by two-color irradiation, and save the installation space.
<IFHA-100WIR:White/IR>Illuminance distribution at white
monochromatic irradiation (LWD = 10 mm)
<IFHA-100W>Illuminance distribution
(LWD=10mm)
<IR>
Comparison of the illuminance distribution shows that even two color model has high uniformity.
<White>
90-10080-9070-8060-7050-6040-5030-4020-3010-200-10
90-10080-9070-8060-7050-6040-5030-4020-3010-200-10
50
0
-50
50
0
-50
500-50 500-50
By operating overdrive, a 3-4 times high light intensification can be achieved.
By operating overdrive, light can become approx. 4 times brighter (When using with white light)
IFHA-100R Overdrive emission
IFHA-100B Overdrive emission
IFHA-100IR-850 Overdrive emission
0% 100% 200% 300% 400%
IFHA seriesSquare Dome Light
Patent Applied for
Lightweight, thin 8-mm dome lightingMuch brighter and clearer imaging is possible. Its no camerawindow design enables wide range and high uniform irradiation!
IFHA-100W Overdrive emission
Stationary emission
Stationary emission
Stationary emission
Stationary emission
外形図
*□represents the color, (R=Red, W=White, B=Blue, IR-850=Infrared).
*Input voltage is DC12V, but DC24V models are also available(exclude IFHA-75IR-850).*Please refer page 80 to confirm the details of DC 24V models.*The SAG value means the maximum voltage setting for SAG power supplies. For details, see page 101.
*■represents the power capacity (30=30W, 50=50W, 100=100W).
DC12V
DC12V
DC24V
IFHA-100□
IFHA-75□
IFHA-50□
IFHA-150□
IFHA-200/100□
IFHA-300□HV
IFHA-300/150□HV
IFHA-150WR
IFHA-150WIR-850
IFHA-200□HV
IFHA-200□
19.5W
6W
14W
9W
22W
12.5W
30W
17W
33W
20.5W
46W
38W
D0
IR(850)
B
WR
IR(850)B
WR
IR(850)B
WR
IR(850)B
WR
IR(850)B
WR
IR(850)W
W
IR(850)
IR(850)
B
W
W
W
R
R
IR(850)B
WR
IR(850)B
WR
2
3
4
5
6
7
8
9
CBADFFDCE0B6FF ①
②
②
②
③
③
①
①
C3BCA5FFDAB8B6FF
-
DC24V -
FF
DC12V20W
17.5W
30W
26W
FFFFF1FF
-DC24V
DC12VW:7Wx2ch B8(W)
DC12VW:7Wx2ch B8(W)
R:7Wx2ch DA(R)
IR:6.2Wx2ch FF(IR)
DrawingPower SupplyPowersupply typeInput VoltagePower
ConsumptionLight ColorModel SAG (*)
ILP-60M2-24(P.81)
IDGB-24シリーズ(P.89)
【Power supply type②】
ILP-30M2(P.81)
【Power supply type①】
IDGB series(P.89)
other, overdrivepower supply etc.
【Power supply type③】
IDGB-■M4IDGB-■M8(P.89)
other,overdrive power supply (Over 4CH) etc.
Light-emitting surface
8
L=5001ch/W
1ch irradiation direction
2ch irradiation direction
4chirradiation direction
3ch irradiation direction
2ch/★
3ch/W
4ch/★
23
150176197
150
176
197
4-M3 through hole(For fixing)
Illumination side
9
Light-emitting surface
8
L=500 23
150176183197
300
100
326
347
8-M3 through hole(For fixing)
Illumination side
8Light-emittingsurface
8
L=50023
100126147
200
226
247
4-M3 through hole(For fixing)
Illumination side
7
Light-emitting surface
8
L=500 23
300326333347
300
100
326
347
8-M3 through hole(For fixing)
Illumination side
6Light-emittingsurface
8
L=50023
200226247
200
226
247
4-M3 through hole(For fixing)
Illumination side
5
Light-emittingsurface
8
L=500 23
150176197
150
176
197
4-M3 through hole(For fixing)
Illumination side
4Light-emittingsurface
8
L=500 23
100126147
100
126
147
4-M3 through hole(For fixing)
Illumination side
3
Light-emittingsurface
8
L=500 23
75101122
75
101
122
4-M3 through hole(For fixing)
Illumination side
22
Light-emittingsurface
8
L=50023
507697
50
76 97
4-M3 through hole(For fixing)
Illumination side
11
See the next page for the effects (image examples).
Dome Light
24V DC Models Available
*★ represents the emission color (R for WR, IR for WIR-850).
Existingmodel
Approx. 4x brighter
Approx. 3x brighter
Approx. 3x brighter
Approx. 3.4x brighter
55 56
NEW
Optional A
ccessories Optional Accessories
Power S
upplies Power Supplies
Coaxial Light C
oaxial Light
Transmissive Light Tr
ansmissive Light
Ring Light R
ing Light
Bar Light B
ar Light
Line Light L
ine Light
INDEX
INDEX
Special Lig
ht Special Light
Dome Light D
ome Light
Dome Light D
ome Light
Printed circuit board layout patterns can be seen through the printed letters or resist layer.
Silk print on the circuit board can be seen clearly.
•Space-saving design allows situations where installation locations are restricted.•Because there is no camera window, the entire aperture can be captured as a field of view.•Workpieces can be photographed from a close distance without troublesome reflected lighting.
IDU-C150IFHA-100
127mm
Space-savingdesign
-119mm
8mm
Much lighter and easy installation. Its no camera window design realizes wide field of view
The printing can clearly be seen, and that makes inspection of blurring of printing easy.
Transparency of the acrylic is greatly improved
Composite configuration of different luminescent colors can be produced by customization
IFH-200/200DW IFHA-200WHVLuminance distribution(LWD=10mm) Luminance distribution(LWD=10mm)
Significant improvement in uniformity
Our improved light guide plate realizes more than tripled illuminance compared to conventional products of the same size.
Compared to existing model, it is approximately 6 times brighter(white)
The barcodes can be clearly seen. That makes recognition of space between codes and width of them easy.
IFH-150/150DW(Existing model) IFHA-150W
Object: a package of coffee
Camera:monochrome cameraUSB3.0Shutter speed:1/1000 Lens:25mmAperture:6
Camera:monochrome cameraUSB3.0Shutter speed:1/1000 Lens:25mmAperture:4
Barcode
Printing
Y Axis (m
m)
X Axis (mm)
100
50
0
-50
-100
-100 -50 0 50 100
Y Axis (m
m)
X Axis (mm)
-100 -50 0 50 100
100
50
0
-50
-100
IFH-100/100DW
IFHA-100W
0% 200% 400% 600% 1200% 1400%
NEW
IFH-100/100R
IFHA-100RNEW
Existingmodel
Existingmodel
Existingmodel
Existingmodel
IFH-100/100B
IFHA-100BNEW
IFH-100/100AIR-850
IFHA-100IR-850NEW
Approx. 6x brighter
Approx. 5x brighter
Approx. 15x brighter
Approx. 3x brighter
NEW
By customizing, two-color model is available.This customization makes it enable to emphasis the features of objects by two-color irradiation, and save the installation space.
<IFHA-100WIR:White/IR>Illuminance distribution at white
monochromatic irradiation (LWD = 10 mm)
<IFHA-100W>Illuminance distribution
(LWD=10mm)
<IR>
Comparison of the illuminance distribution shows that even two color model has high uniformity.
<White>
90-10080-9070-8060-7050-6040-5030-4020-3010-200-10
90-10080-9070-8060-7050-6040-5030-4020-3010-200-10
50
0
-50
50
0
-50
500-50 500-50
By operating overdrive, a 3-4 times high light intensification can be achieved.
By operating overdrive, light can become approx. 4 times brighter (When using with white light)
IFHA-100R Overdrive emission
IFHA-100B Overdrive emission
IFHA-100IR-850 Overdrive emission
0% 100% 200% 300% 400%
IFHA seriesSquare Dome Light
Patent Applied for
Lightweight, thin 8-mm dome lightingMuch brighter and clearer imaging is possible. Its no camerawindow design enables wide range and high uniform irradiation!
IFHA-100W Overdrive emission
Stationary emission
Stationary emission
Stationary emission
Stationary emission
外形図
*□represents the color, (R=Red, W=White, B=Blue, IR-850=Infrared).
*Input voltage is DC12V, but DC24V models are also available(exclude IFHA-75IR-850).*Please refer page 80 to confirm the details of DC 24V models.*The SAG value means the maximum voltage setting for SAG power supplies. For details, see page 101.
*■represents the power capacity (30=30W, 50=50W, 100=100W).
DC12V
DC12V
DC24V
IFHA-100□
IFHA-75□
IFHA-50□
IFHA-150□
IFHA-200/100□
IFHA-300□HV
IFHA-300/150□HV
IFHA-150WR
IFHA-150WIR-850
IFHA-200□HV
IFHA-200□
19.5W
6W
14W
9W
22W
12.5W
30W
17W
33W
20.5W
46W
38W
D0
IR(850)
B
WR
IR(850)B
WR
IR(850)B
WR
IR(850)B
WR
IR(850)B
WR
IR(850)W
W
IR(850)
IR(850)
B
W
W
W
R
R
IR(850)B
WR
IR(850)B
WR
2
3
4
5
6
7
8
9
CBADFFDCE0B6FF ①
②
②
②
③
③
①
①
C3BCA5FFDAB8B6FF
-
DC24V -
FF
DC12V20W
17.5W
30W
26W
FFFFF1FF
-DC24V
DC12VW:7Wx2ch B8(W)
DC12VW:7Wx2ch B8(W)
R:7Wx2ch DA(R)
IR:6.2Wx2ch FF(IR)
DrawingPower SupplyPowersupply typeInput VoltagePower
ConsumptionLight ColorModel SAG (*)
ILP-60M2-24(P.81)
IDGB-24シリーズ(P.89)
【Power supply type②】
ILP-30M2(P.81)
【Power supply type①】
IDGB series(P.89)
other, overdrivepower supply etc.
【Power supply type③】
IDGB-■M4IDGB-■M8(P.89)
other,overdrive power supply (Over 4CH) etc.
Light-emitting surface
8
L=5001ch/W
1ch irradiation direction
2ch irradiation direction
4chirradiation direction
3ch irradiation direction
2ch/★
3ch/W
4ch/★
23
150176197
150
176
197
4-M3 through hole(For fixing)
Illumination side
9
Light-emitting surface
8
L=500 23
150176183197
300
100
326
347
8-M3 through hole(For fixing)
Illumination side
8Light-emittingsurface
8
L=50023
100126147
200
226
247
4-M3 through hole(For fixing)
Illumination side
7
Light-emitting surface
8
L=500 23
300326333347
300
100
326
347
8-M3 through hole(For fixing)
Illumination side
6Light-emittingsurface
8
L=50023
200226247
200
226
247
4-M3 through hole(For fixing)
Illumination side
5
Light-emittingsurface
8
L=500 23
150176197
150
176
197
4-M3 through hole(For fixing)
Illumination side
4Light-emittingsurface
8
L=500 23
100126147
100
126
147
4-M3 through hole(For fixing)
Illumination side
3
Light-emittingsurface
8
L=500 23
75101122
75
101
122
4-M3 through hole(For fixing)
Illumination side
22
Light-emittingsurface
8
L=50023
507697
50
76 97
4-M3 through hole(For fixing)
Illumination side
11
See the next page for the effects (image examples).
Dome Light
24V DC Models Available
*★ represents the emission color (R for WR, IR for WIR-850).
Existingmodel
Approx. 4x brighter
Approx. 3x brighter
Approx. 3x brighter
Approx. 3.4x brighter
55 56
NEW
Optional A
ccessories Optional Accessories
Power S
upplies Power Supplies
Coaxial Light C
oaxial Light
Transmissive Light Tr
ansmissive Light
Ring Light R
ing Light
Bar Light B
ar Light
Line Light L
ine Light
INDEX
INDEX
Special Lig
ht Special Light
Dome Light D
ome Light
Dome Light D
ome Light
Image Examples with IFHA series
Effect
Brightly irradiates the entire field of view uniformly, while suppressing halation.Since the IR specification permits a certain type of ink to pass light through, it is possible to obtain an image where the printed areas are filtered out and no longer visible.Possible to recognize scratches and dust on a printed part.
Object:Button battery Dome light:IDDA-KH120AW (LWD=10mm) Light:IFHA-150W (LWD=20mm)
Ring light:IMAR-130W (LWD=100mm) Light:IFHA-150W (LWD=10mm)Object:Mounting board
Object: screws in a polyethyl bag Ring light:IMAR-200W (LWD=80mm) Light:IFHA-150W (LWD=10mm)
Simultaneous Inspection of carved seal and printed letters
Silk printing inspection on the mounting board
Number inspection in plastic bag
Light:IFHA-150W (LWD=15mm)Object: Paper container lid
Object: metal lid & shrink packaging Light:IFHA-150W (LWD=15mm) Light:IFHA-150IR-850 (LWD=15mm)
Inspection of scratches and contamination in the printing area
Inspection of printing, scratches, dust, etc.
Bar light:Bar light×2 Oblique irradiation Light:IFHA-150W (LWD=5mm)Object:Can
The reflection of paint / shrink-wrapped surface texture is suppressed and the printed image beneath is clearly readable.
The reflection of paint / shrink-wrapped surfacetexture is suppressed and the printed imagebeneath is clearly readable.
Infrared can erase printing other than printed letters, and can recognize the printed area in addition to scratches, contamination, etc.Printing inspection of curved surfaces such as cans
Object: Paper container (bottom) Light:IMAR-130W (LWD=60mm) Light:IFHA-150W (LWD=10mm)Shadows appear around the printed area, therefore, characters are difficult to recognize.
Characters can be easily recognized due to low shadow reflection.
Printing inspection of the recess
Workpiece: Aluminum deposited film Ring light:IMAR-130W (LWD=50mm) Light:IFHA-150W (LWD=20mm)Color unevenness occurs on the printed area due to halation on the film surface.
No color unevenness due to halation, and print and peripheral characters can be clearly recognized.
Printing Inspection of Film
Light:IFHA-150IR-850 (LWD=15mm)Due to permeation of printing ink, printing can be erased, which makes scratches, dust, etc. in the printing area recognizable.
Although the stamp can be detected, the print can not be recognized.Contamination and such on the surface are recognized.
Stamping and printing can be recognized at the same time.Contamination on the surface is suppressed.
Halation occurs near the light-emitting element.It becomes dark in the central area of the camera hole.
The entire view field can be illuminated homogeneously and silk-printed letters and lines are clearly visible.
Halation occurs on the surface of the bag and is not suitable for number inspection in the plastic bag.
Reduced surface halation and internal number can be easily inspected.
Barcodes, etc. on the curved surface can not be recognized due to the light reflection.
The influence of reflections is small,even on a curved surface, and therecognizable area is comparatively large.
57 58
Optional A
ccessories Optional Accessories
Power S
upplies Power Supplies
Coaxial Light C
oaxial Light
Transmissive Light Tr
ansmissive Light
Ring Light R
ing Light
Bar Light B
ar Light
Line Light L
ine Light
INDEX
INDEX
Special Lig
ht Special Light
Dome Light D
ome Light
Dome Light D
ome Light
Image Examples with IFHA series
Effect
Brightly irradiates the entire field of view uniformly, while suppressing halation.Since the IR specification permits a certain type of ink to pass light through, it is possible to obtain an image where the printed areas are filtered out and no longer visible.Possible to recognize scratches and dust on a printed part.
Object:Button battery Dome light:IDDA-KH120AW (LWD=10mm) Light:IFHA-150W (LWD=20mm)
Ring light:IMAR-130W (LWD=100mm) Light:IFHA-150W (LWD=10mm)Object:Mounting board
Object: screws in a polyethyl bag Ring light:IMAR-200W (LWD=80mm) Light:IFHA-150W (LWD=10mm)
Simultaneous Inspection of carved seal and printed letters
Silk printing inspection on the mounting board
Number inspection in plastic bag
Light:IFHA-150W (LWD=15mm)Object: Paper container lid
Object: metal lid & shrink packaging Light:IFHA-150W (LWD=15mm) Light:IFHA-150IR-850 (LWD=15mm)
Inspection of scratches and contamination in the printing area
Inspection of printing, scratches, dust, etc.
Bar light:Bar light×2 Oblique irradiation Light:IFHA-150W (LWD=5mm)Object:Can
The reflection of paint / shrink-wrapped surface texture is suppressed and the printed image beneath is clearly readable.
The reflection of paint / shrink-wrapped surfacetexture is suppressed and the printed imagebeneath is clearly readable.
Infrared can erase printing other than printed letters, and can recognize the printed area in addition to scratches, contamination, etc.Printing inspection of curved surfaces such as cans
Object: Paper container (bottom) Light:IMAR-130W (LWD=60mm) Light:IFHA-150W (LWD=10mm)Shadows appear around the printed area, therefore, characters are difficult to recognize.
Characters can be easily recognized due to low shadow reflection.
Printing inspection of the recess
Workpiece: Aluminum deposited film Ring light:IMAR-130W (LWD=50mm) Light:IFHA-150W (LWD=20mm)Color unevenness occurs on the printed area due to halation on the film surface.
No color unevenness due to halation, and print and peripheral characters can be clearly recognized.
Printing Inspection of Film
Light:IFHA-150IR-850 (LWD=15mm)Due to permeation of printing ink, printing can be erased, which makes scratches, dust, etc. in the printing area recognizable.
Although the stamp can be detected, the print can not be recognized.Contamination and such on the surface are recognized.
Stamping and printing can be recognized at the same time.Contamination on the surface is suppressed.
Halation occurs near the light-emitting element.It becomes dark in the central area of the camera hole.
The entire view field can be illuminated homogeneously and silk-printed letters and lines are clearly visible.
Halation occurs on the surface of the bag and is not suitable for number inspection in the plastic bag.
Reduced surface halation and internal number can be easily inspected.
Barcodes, etc. on the curved surface can not be recognized due to the light reflection.
The influence of reflections is small,even on a curved surface, and therecognizable area is comparatively large.
57 58
Optional A
ccessories Optional Accessories
Power S
upplies Power Supplies
Coaxial Light C
oaxial Light
Transmissive Light Tr
ansmissive Light
Ring Light R
ing Light
Bar Light B
ar Light
Line Light L
ine Light
INDEX
INDEX
Special Lig
ht Special Light
Dome Light D
ome Light
Dome Light D
ome Light