mtx m2m catalog 2015 iot, internet of things

SOLUTIONS FOR YOUR M2M-IOT DAILY APPLICATIONS.

INFINITE SCENARIOS POSSIBILITIES

WWW.MTXM2M.COM

WIRELESS M2M-IOT MODEMS

PRODUCT CATALOG 2015

MTX‐M2M Product Catalog www.mtxm2m.com

Matrix was founded in 1991 and ever since has being supplying high tech products to the industrial markets and system integrators.

Our portfolio is carefully selected and only worldwide leader manufacturers are included on it.

This continuous search for the newest and most advanced products is complemented with a range of products designed, developed and manufactured by Matrix mainly in the M2M area.

MTX‐M2M new advanced wireless modems family GSM/GPRS UMTS/HSPA 4G/LTE based in Cinterion WM modules. Features JAVA / LINUX processing and Radio Frequency optional cards allowing infinite M2M scenarios possibilities.

MTX‐M2M range of product covers all your machine needs to communicate. From simple applications using SMS or CSD, up to GPRS connection with powerful TCP‐IP integrated, up to fast low latency transmit/receive data using UMTS/HSPA & LTE network.

Many interfaces, wired –RS232, RS845– or wireless optional RF modules (GPS, BT, WiFi, RF ISM, Zigbee) are now possible.

JAVA enabled modems save space, time and cost reduction, embedding your application inside without any extra component.

MTX‐M2M Product Catalog www.mtxm2m.com

CONTENT

SELECTOR TABLE 4

MTX‐M2M MODEMS

JAVA models MTX‐65i FAMILY 5 MTX‐3G‐JAVA 9 MTX‐DIN 13 MTX‐IND 17

Other models MTX‐HSPA‐PH8 21 MTX‐LTE 23

Linux platforms MTX‐GATEWAY 25 MTX‐GTW 28

MTX‐ROUTERS MTX‐TITAN 31 MTX‐TITAN‐Mini 33 MTX‐ROUTER 35 MTX‐ROUTER‐4 PORTS 37

SOFTWARE MTX‐TUNNEL 39

EMBEDDED SOLUTIONS MTX‐XT65i 43 MOD‐3G‐JAVA 46

ACCESSORIES MTX‐ACC 49

SUPPORT 51

QUALITY 52

CONTACT 53

Devices Lead T

ime

Tech

JAVA

LIN

UXM

TX tu

nnel co

mpa

tible

USB

USB

OTG

Ethe

rnet

WiF

iRS

232

RS48

5CA

N

I2C

1‐W

IRE

GPS

GPIO

Opt

oiso

late

d IO

Rela

ysAn

alog IO

VGA

3‐ax

is ac

cele

rom

eter

Anal

og a

udio

Ultr

a Lo

w P

ower 2

.5uA

DC AC/D

CBa

tter

yIP

30IP

65

DIN

rail

mou

ntW

aven

is/Em

eris

Blue

tott

h v2

.1Bl

ueto

tth

v4.0 Lo

w E

nerg

yIS

M 8

68/9

00M

Hz

MTX-65i Stock 2G Y Y x1 x2 Y x4 x3 Y Y Y AdapterMTX-65i-RS485 Stock 2G Y Y x1 x1 x1 Y x4 x2 Y Y AdapterMTX-65i-ULP 5w 2G Y Y x1 x2 Y x4 x3 Y Y Y Y AdapterMTX-65i-ULP-WR 5w 2G Y Y x1 x2 Y x4 x3 Y Y Y Y AdapterMTX-65i+G V6 Stock 2G Y Y x1 x1 Y Y x1 x4 x2 Y Y Y Y AdapterMTX-65i+G+B V7 Stock 2G Y Y x1 x1 Y Y x1 x4 x2 Y Y Y Y Y AdapterMTX-65i-BAT Stock 2G Y OPT x1 x1 Y x1 x4 x2 Y Y Y Y Y AdapterMTX-3G-JAVA Stock 3G Y Y x1 x2 Y x4 x3 Y Y Adapter OPT OPTMTX-3G-JAVA-RS485 Stock 3G Y OPT x1 x1 x1 Y x4 x2 Y Y Adapter OPT OPT OPTMTX-3G-JAVA-RS485-WC25 2w 3G Y OPT x1 x1 Y x4 x2 Y Y Adapter YMTX-3G-JAVA-BAT Stock 3G Y Y x1 x1 Y x1 x4 x2 Y Y Y Y Adapter OPT OPT OPT OPTMTX-3G-JAVA-GPS Stock 3G Y Y x1 x1 Y Y x1 x4 x2 Y Y Y Adapter OPT OPT OPTMTX-3G-JAVA-GPS-BAT Stock 3G Y OPT x1 x1 Y Y x1 x4 x2 Y Y Y Y Adapter OPT OPT OPT OPTMTX-3G-JAVA-GPS-BT 1w 3G Y Y x1 Y Y x1 x4 x2 Y Y Y Adapter YMTX-3G-JAVA-ULP 5w 3G Y Y x1 x2 Y x4 x3 Y Y Y Adapter OPT OPT OPTMTX-3G-JAVA-ULP-GPS 5w 3G Y Y x1 x1 Y Y x4 x3 Y Y Y Adapter OPT OPT OPT OPTMTX-3G-JAVA-ULP-WC25 5w 3G Y OPT x1 x1 Y x4 x3 Y Y Y Adapter YMTX-3G-JAVA-WC25 Stock 3G Y OPT x1 x1 Y x1 x4 x2 Y Y Y Adapter YMTX-3G-JAVA-WC500 1w 3G Y OPT x1 x1 Y x1 x4 x2 Y Y Y Adapter YMTX-3G-JAVA-BT 1w 3G Y Y x1 x1 Y x1 x4 x2 Y Y Y Adapter YMTX-GATEWAY Stock ‐ Y Y x1 x1 x1 x1 x3 x1 x1 x1 OPT x2 OPT Y Y Y OPT OPT OPT OPTMTX-GATEWAY-2G Stock 2G Y Y x1 x1 x1 x1 x3 x1 x1 x1 OPT x2 OPT Y Y Y OPT OPT OPT OPTMTX-GATEWAY-3G Stock 3G Y Y x1 x1 x1 x1 x3 x1 x1 x1 OPT x2 OPT Y Y Y OPT OPT OPT OPTMTX-GATEWAY-4G Stock 4G Y Y x1 x1 x1 x1 x3 x1 x1 x1 OPT x2 OPT Y Y Y OPT OPT OPT OPTMTX-GATEWAY-OEM Stock OPT Y Y x1 x1 x1 x1 x3 x1 x1 x1 OPT x2 OPT Y Y OPT OPT OPT OPTMTX-GTW Stock ‐ Y Y x1 x1 x1 x1 x2 x1 x1 Y Y AdapterMTX-GTW-2G Stock 2G Y Y x1 x1 x1 x1 x2 x1 x1 OPT OPT x1 x1 OPT Y Y Y AdapterMTX-GTW-3G Stock 3G Y Y x1 x1 x1 x1 x2 x1 x1 OPT x1 x1 OPT Y Y Y AdapterMTX-GTW-3G-GPS 1w 3G Y Y x1 x1 x1 x1 x2 x1 x1 OPT Y x1 x1 OPT Y Y Y AdapterMTX-GTW-4G Stock 4G Y Y x1 x1 x1 x1 x2 x1 x1 OPT x1 x1 OPT Y Y Y AdapterMTX-IND-2G Stock 2G Y Y x1 x2 x2 OPT OPT x6 x4 x3 Y Y Y Y OPT OPT OPTMTX-IND-2G-WC25 Stock 2G Y Y x1 x1 x1 OPT x6 x4 x3 Y Y Y Y YMTX-IND-2G-WC500 1w 2G Y Y x1 x1 x1 OPT x6 x4 x3 Y Y Y Y YMTX-IND-3G Stock 3G Y Y x1 x2 x2 OPT OPT x6 x4 x3 Y Y Y Y OPT OPT OPTMTX-IND-3G-WC25 Stock 3G Y Y x1 x1 x1 OPT x6 x4 x3 Y Y Y Y YMTX-IND-3G-WC500 w 3G Y Y x1 x1 x1 OPT x6 x4 x3 Y Y Y Y YMTX-DIN-2G Stock 2G Y Y x1 x2 x2 Y OPT x6 x4 x3 Y YMTX-DIN-3G Stock 3G Y OPT x1 x2 x2 Y OPT x6 x4 x3 Y Y OPT OPT OPT OPTMTX-LTE-PLS8-E 1w 4G x1 Y Y Y AdapterMTX-HSPA-PH8+G 1w 3G x1 x1 Y Y Y Y AdapterMTX-HSPA-PH8-P+G Stock 3G x1 x1 Y Y Y Y AdapterMTX-Router-Titan-3G Stock 3G Y x1 x1 x1 x3 x1 x2 Y Y Y OPTMTX-Router-Titan-3G-mini Stock 3G Y x1 x1 x1 x2 x1 x1 Y Y

January 2015 www.mtxm2m.comwww.matrix.es

www.mtx-terminals.com www.mtxm2m.com www.matrix.es 2014/10 Page 1/4

MTX Terminals® by MATRIX ELECTRONICA S.L.U.

MTX-65i Family Intelligent Java enabled application GSM/GPRS M2M Modem

The MTX-65i family modems are an all-in-one solution consisting of a Java J2ME programmable modem that enables GSM Voice, SMS, Fax and Data (GPRS class 12). The Quad Band functionality allows them to operate at all relevant GSM frequencies all over the world. It has an intrinsic and powerful TCP/IP communication stack with Internet Services such: TCP, UDP, HTTP, FTP, SMTP, and POP3.

The MTX-65i family modems are Java J2ME programmable and have a complete set of interfaces (RS232, RS485, USB, GPIO, I2C, GPIO, optoisolated IOs, Analog-to-Digital converter) avoiding need for further hardware components, shortening time to market and reducing costs. It also has a wide range of options allowing it to be used in infinite M2M applications:

Ultra Low Power: 2.5μA power consumption in sleep mode. Ideal in remote-battery operated systems GNSS module inside: GPS and GLONASS receiver modules allow track & location applications Hardware Watchdog and internal Li-Po battery RS485 port: isolated input/output for industrial use

Industrial features: the modem can be used in industrial applications due to its extended operating temperature range. It also features an automatic restart after shutdown in case of faulty power conditions.

MTX-65i Family



*: depending on model, see table below

Over-the-air update Application SW: OTAP

JavaTM features CLDC 1.1 HI J2METM profile IMP-NG Software watchdog for applications Additional accessible periphery for Java applications: o I/O pins, I2C, SPI interfaces, ADC/DAC o Serial interfaces (API): ASC0, ASC1

Specification GPS o Receiver: 22-channel, L1 1575.42MHz o Accuracy position: <2.5m 50% o Position with DGPS/SBAS: <2.0m 50% o Support of SBAS (WAAS/EGNOS/MSAS) datao GPS active antenna supply: 3.0Vo A-GPS enabled o Tracking sensitivity: -160dBm (with external antenna)o Date WGS-84 o Start-up time:

Hot start: <2sWarm start: 35s Cold start: 38s1x RS232 (2-wire) port

o Protocols: NMEA-183. Baudrate: 9600 default, configurable 4800, 19200, 38400, 57600, 115200

o NMEA-0183 Messages: GGA, GSA, GSV, RMC, CHN,GLL, VTG, ZDA.

GPRS o GPRS class 12 o Mobile station class Bo PBCCH support o Coding schemes CS 1-4

CSD data transmission o Up to 14.4kbit/so V.110 o Non-transparent modeo USSD support

SMS o Point-to-point MO and MTo SMS cell broadcasto Text and PDU mode

Fax o Group 3, class 1,2

Voice o Triple-rate codec for HR, FR and EFRo Adaptive multi-rate AMRo Basic hands-free operation o Echo cancellation o Noise reduction

Open application resources ARM© Core, Blackfin© DSP Memory: 400KB (RAM) and 1.7MB (Flash) Improved power-saving mode

Interfaces GSM FME M antenna connector GPS SMA F antenna connector (*) USB 2.0 High Speed port up to 480Mbps SIM card interface 1.8V/3V DB9 female connector: complete 8-wire RS232 modem interface (*)

HD-Dsub15 female connector: o 1x RS232 (2/4-wires) port (*) o 1x I2C port o 5x GPIO (*)o 6x Optoisolated I/Os (*)o 2x analog inputs o 1x analog output (PWM) (*)

1x RS485 (5-way plug-in terminal block) (*) 2 status LEDs (GSM status and user programmable) Handset audio interface Plug-in RJ12 power supply connector

General features Quad-Band GSM 850/900/1800/1900MHz GPRS multi-slot class 12 SIM Application Toolkit, 3GPP release 99 Control via AT commands (Hayes, TS 27.007, TS 27.005) TCP/IP stack access via AT commands Internet services: TCP, UDP, HTTP, FTP, SMTP, POP3 Supply voltage range:

o Maximum: 6.5 to 40VDC o Recommended: 7 to 35VDC

Average power consumption (at 12V) modes: o Ultra Low Power: 2.5μA o Power down: 10mA o Sleep mode (registered DRX=6): 12mA o Idle mode (registered DRX=6): 17mAo Speech mode and GPS tracking: 109mA o GPRS class 12 and GPS tracking: 202mA

Operating temperature range: -30ºC to +80ºC Dimensions, excluding connectors: 78.1 x 66.8 x 37.2mm Weight: <190 g IP30 enclosure Internal Hardware Watchdog (*) Internal 1650mAh Li-Po battery (*) 3-Axis Accelerometer (±2g/±4g/±8g) (*) Powered by Cinterion TC65i FW2.0 module

MTX-65i Family



MTX

-65i

MTX

-65i

-BAT

MTX

-65i

-RS4

85M

TX-6

5i-R

S485

-LC

MTX

-65i

+G V

6M

TX-6

5i+G

+B V

7M

TX-6

5i-U

LP

RS232 (8-wire) X X

RS232 (4-wire) X X X X X X

RS232 (2-wire) X

RS485 X X

USB X X X X X X X

I2C X X X X X X X

ADC x2 x2 x2 x2 x2 x2 x1

DAC x1 x1

GPIO x4 x1 x1 x1 x5

Optoisolated IO x6 x4 x6 x6

Accelerometer X *2 X

RTC X X X X X X X

Sleep mode X * 1 X X

Ultra Low Power mode X

Wake Up (by RTC) X * 1 X X X

Wake Up (by Accelerometer) X X X

Power On (by RTC) X

Power On (by Opto IO) X

Li-Po Battery X X

HD WatchDog X X X

Auto On X X X X X X X

Auto On disable X X X X

GPS X X

GPS/GLONASS *3 *3 *3

*1: only if AUTO ON is disabled by hardware*2: upon request*3: GLONASS can be ordered upon request

MTX-65i Family



Ordering information 199801311: MTX-65i

2xRS232, USB, I2C, 2xADC, 1xDAC, 4xGPIO

199801307: MTX-65i-BAT Li-Po battery, 1xRS232, USB, I2C, 2xADC, 1xGPIO, 6xOptoIO, Accelerometer, Sleep mode, Hardware Watchdog

199801133: MTX-65i-RS485 1xRS485, 1x RS232, USB, I2C, 2xADC, 4xOptoIO, Sleep mode

199801123: MTX-65i-RS485-LC 1xRS485, 1x RS232, USB, I2C, 2xADC

199801310: MTX-65i+G V6 GPS, 1xRS232, USB, I2C, 2xADC, 1xGPIO, 6xOptoIO, Sleep mode, Hardware Watchdog

199801302: MTX-65i+G+B V7 GPS, Li-Po battery, 1xRS232, USB, I2C, 2xADC, 1xGPIO, 6xOptoIO, Accelerometer, Sleep mode, Hardware Watchdog

199801119: MTX-65i-ULP Ultra Low Power, 2xRS232, USB, I2C, 2xADC, 1xDAC, 5xGPIO, 4xOptoIO



MTX-3G-JAVA Family Intelligent Java enabled applications HSPA Modem

The MTX-3G-JAVA modem is an innovative and powerful all-in-one solution enabling GSM voice, SMS, fax and 3G (UMTS/HSPA) high speed data transmission. It has an intrinsic TCP/IP communication stack with Internet Services such: TCP, UDP, HTTP, FTP, SMTP, and POP3.

The MTX-3G-JAVA is Java J2ME programmable and has a complete set of interfaces (RS232, RS485, USB, GPIO, I2C, GPIO, optoisolated IOs, Analog-to-Digital converter) avoiding need for further hardware components, shortening time to market and reducing costs. It also has a wide range of options allowing it to be used in infinite M2M applications:

Ultra Low Power: 2.5μA power consumption in sleep mode. Ideal in remote-battery operated systems GNSS module inside: GPS and GLONASS receiver modules allow track & location applications Hardware Watchdog and internal Li-Po battery RS485 port: isolated input/output for industrial use RF card: allows for easy development of RF gateways (Wavenis, WiFi, Bluetooth, ZigBee, ISM 868/915)

Industrial features: the modem can be used in industrial applications due to its extended operating temperature range. It also features an automatic restart after shutdown in case of faulty power conditions.

MTX-3G-JAVA Family



*: depending on model, see table below

Drivers USB, MUX driver for Microsoft® Windows XP™, Vista™, Windows 7™

USB, MUX driver for Microsoft® Windows Embedded Handheld™ >=6.x

USB, MUX driver for Microsoft® Windows Embedded Compact™ >=6.x

USBserial/CDC-ACM driver for Linux

JavaTM features Oracle Java ME Embedded 3.2 Compliant to CLDC 1.1 HI and IMP-NG standards Capable of running multiple MIDlets in parallel with inter-MIDlet communication

Additional Java standards APIs: o JSR75 (FileConnection) o JSR177 (CRYPTO) o JSR280 (XML)

Additional accessible periphery for Java applications o I/O pins, I2C, SPI interfaces, ADC/DAC o Serial interfaces (API): ASC0, ASC1, USB

Memory space for Java applications o Flash File System: 8MB o RAM: 6MB o Just-in-Time (JIT) Compiler execution optimization

Specifications HSPA (3GPP Release 6,7) o DL 7.2Mbps, UL 5.7Mbps o HSDPA Cat.8 / HSUPA Cat.6 data rates o Compressed mode (CM) according to 3GPP TS25.212

UMTS (3GPP Release 4) o PS data rate – 384 kbps DL, UL 384kbps o CS data rate – 64 kbps DL, UL 64kbps

HSPA (3GPP Release 6,7) o DL 7.2Mbps, UL 5.7Mbps o HSDPA Cat.8 / HSUPA Cat.6 data rates

GPRS o GPRS class 12 o Mobile station class B o PBCCH support o Coding schemes CS 1-4

EGPRS o Multislot class 12 o EDGE E2 power class for 8PSK

CSD data transmission o Up to 9.6kbps o V.110 o Non-transparent mode o USSD support

SMS o Point-to-point MO and MT o SMS cell broadcast o Text and PDU mode

Interfaces (model dependent) GSM FME M antenna connector SMA F antenna connector or other RF options (*) USB 2.0 High Speed port up to 480Mbps SIM card interface 1.8V and 3V DB9 female connector: complete 8-wires RS232 modem interface (*)

HD-Dsub15 female connector: o 1x RS232 (4-wire) port (*) o 1x I2C port o 5x GPIO (*) o 6x optoisolated I/Os (*) o 2x analog inputs (*) o 1x analog output (*)

1x RS485 optional (5-way plug-in terminal block) (*) Operating status LEDs Plug-in power supply (RJ connector)

General features World Wide Version (default)

o UMTS/HSPA+: Five-Band 800/850/900/1900/2100MHz

o GSM/GPRS/EDGE: Quad band 850/900/1800/1900MHz

European Version o UMTS/HSPA+: Dual-Band 900/2100MHz o GSM/GPRS/EDGE: Dual band 900/1800MHz

American Version o UMTS/HSPA+: Dual-Band 850/1900MHz o GSM/GPRS/EDGE: Dual band 850/1900MHz

3GPP Release 6, 7 SIM Application Toolkit, 3GPP release 99 Control via AT commands (Hayes, TS 27.007, TS 27.005) TCP/IP stack access via AT commands Internet services: TCP, UDP, HTTP, FTP, SMTP, POP3 Power consumption at 12V (average)

o Ultra Low Power: 2.5μA (*) o Sleep mode: 7mA (*) o Idle: 12mA o HSPA data transfer: 152mA

Operating temperature range: -30ºC to +85ºC Dimensions, excluding connectors: 78.1 x 66.8 x 37.2mm Weight: <190 g IP30 enclosure Internal Hardware Watchdog (*) Internal 1650mAh Li-Po battery (*) 3-Axis Accelerometer (±2g/±4g/±8g) optional (*) Powered by Cinterion EHS6 module

Special features

USB interfaces support multiple composite modes and a Linux/Mac compliant mode

Firmware update via USB/RS232 Real Time Clock with alarm functionality Multiplexer according 3GPP TS 27.010 RLS Monitoring (Jamming detection) Informal Network Scan

MTX-3G-JAVA Family



MTX

-3G

-JAVA

MTX

-3G

-JAVA

-RS4

85M

TX-3

G-JA

VA-R

S485

-WC2

5M

TX-3

G-JA

VA-B

ATM

TX-3

G-JA

VA-G

PSM

TX-3

G-JA

VA-G

PS-B

ATM

TX-3

G-JA

VA-G

PS-B

TM

TX-3

G-JA

VA-U

LPM

TX-3

G-JA

VA-U

LP-G

PSM

TX-3

G-JA

VA-U

LP-W

C25

MTX

-3G

-JAVA

-WC2

5M

TX-3

G-JA

VA-W

C500

MTX

-3G

-JAVA

-BT

MTX

-3G

-JAVA

-BLE

MTX

-3G

-JAVA

-XBE

EM

TX-3

G-JA

VA-8

68M

TX-3

G-JA

VA-9

00M

TX-3

G-JA

VA-W

MBU

SM

TX-3

G-JA

VA-W

IFI

RS232 (8-wire) X X X X

RS232 (4-wire) X X X X X X X X X X X X X X X

RS485 X X

USB X X X X X X X X X X X X X X X X X X X

I2C X X X X X X X X X X X X X X X X X X X

ADC x2 x2 x2 x2 x2 x2 x2 x1 x1 x1 x2 x2 x2 x2 x2 x2 x2 x2 x2

DAC x1 x1 x1 x1

GPIO x4 x1 x1 x1 x1 x5 x5 x5 x1 x1 x1 x1 x1 x1 x1 x1 x1

Optoisolated IO x4 x4 x6 x6 x6 x6 x6 x6 x6 x6 x6 x6 x6 x6 x6

Accelerometer X X X X X X X X X X X X X

RTC X X X X X X X X X X X X X X X X X X X

Sleep mode * 1 * 1 X X X X X X X X X X X X X

Ultra Low Power mode X X X

Wake Up (by RTC) * 1 * 1 X X X X X X X X X X X X X

Wake Up (by Accelerometer) X X X X X X X X X X X X X

Power On (by RTC) X X X

Power On (by Opto IO) X X X

Li-Po Battery X X * 2 * 2 * 2 * 2 * 2 * 2 * 2 * 2 * 2

HD WatchDog X X X X X X X X X X X X X

Auto On X X X X X X X X X X X X X X X X X X X

Internal RF module X X X X X X X X X X X X

GPS X X X X * 3 * 3 * 3 * 3 * 3 * 3 * 3 * 3 * 3

GPS/GLONASS *4 *4 *4 *4 *4 *4 *4 *4 *4 *4 *4 *4 *4

*1: only if AUTO ON is disabled by hardware*2: battery option can be ordered upon request*3: GPS can be ordered upon request*4: GLONASS can be ordered upon request

MTX-3G-JAVA Family



Ordering information 199801320: MTX-3G-JAVA

2xRS232, USB, I2C, 2xADC, 1xDAC, 4xGPIO

199801330: MTX-3G-JAVA-RS485 1xRS485, 1x RS232, USB, I2C, 2xADC, 4xOptoIO, Sleep mode

199801330: MTX-3G-JAVA-RS485-WC25 Coronis Wavecard 25mW 1xRS485, USB, I2C, 2xADC, 4xOptoIO, Sleep mode

199801331: MTX-3G-JAVA-BAT Li-Po battery, 1xRS232, USB, I2C, 2xADC, 1xGPIO, 6xOptoIO, Accelerometer, Sleep mode, Hardware Watchdog

199801332: MTX-3G-JAVA-GPS GPS, 1xRS232, USB, I2C, 2xADC, 1xGPIO, 6xOptoIO, Accelerometer, Sleep mode, Hardware Watchdog

199801342: MTX-3G-JAVA-GPS-BAT GPS, Li-Po battery, 1xRS232, USB, I2C, 2xADC, 1xGPIO, 6xOptoIO, Accelerometer, Sleep mode, Hardware Watchdog

199801342: MTX-3G-JAVA-GPS-BT GPS, Bluetooth 2.1, 1xRS232, USB, I2C, 2xADC, 1xGPIO, 6xOptoIO, Accelerometer, Sleep mode, Hardware Watchdog

199801343: MTX-3G-JAVA-ULP Ultra Low Power, 2xRS232, USB, I2C, 2xADC, 1xDAC, 5xGPIO, 4xOptoIO

199801340: MTX-3G-JAVA-ULP-GPS GPS, Ultra Low Power, 2xRS232, USB, I2C, 2xADC, 1xDAC, 5xGPIO, 4xOptoIO

199801344: MTX-3G-JAVA-ULP-WC25 Coronis Wavecard 25mW (868MHz), Ultra Low Power, 2xRS232, USB, I2C, 2xADC, 1xDAC, 5xGPIO, 4xOptoIO

199801336: MTX-3G-JAVA-WC25 Coronis Wavecard 25mW, 1xRS232, USB, I2C, 2xADC, 1xGPIO, 6xOptoIO, Accelerometer, Sleep mode, Hardware Watchdog

199801337: MTX-3G-JAVA-WC500 Coronis Wavecard 500mW, 1xRS232, USB, I2C, 2xADC, 1xGPIO, 6xOptoIO, Accelerometer, Sleep mode, Hardware Watchdog

199801345: MTX-3G-JAVA-BT Bluetooth 2.1, 1xRS232, USB, I2C, 2xADC, 1xGPIO, 6xOptoIO, Accelerometer, Sleep mode, Hardware Watchdog

199801346: MTX-3G-JAVA-BLE Bluetooth Low Energy, 1xRS232, USB, I2C, 2xADC, 1xGPIO, 6x6xOptoIO, Accelerometer, Sleep mode, Hardware Watchdog

199801347: MTX-3G-JAVA-XBEE XBee, 1xRS232, USB, I2C, 2xADC, 1xGPIO, 6xOptoIO, Accelerometer, Sleep mode, Hardware Watchdog

199801348: MTX-3G-JAVA-868 European ISM (868MHz), 1xRS232, USB, I2C, 2xADC, 1xGPIO, 6xOptoIO, Accelerometer, Sleep mode, Hardware Watchdog

199801349: MTX-3G-JAVA-900 USA ISM (900MHz), 1xRS232, USB, I2C, 2xADC, 1xGPIO, 6xOptoIO, Accelerometer, Sleep mode, Hardware Watchdog

199801350: MTX-3G-JAVA-WMBUS Wireless MBUS, 1xRS232, USB, I2C, 2xADC, 1xGPIO, 6xOptoIO, Accelerometer, Sleep mode, Hardware Watchdog

199801351: MTX-3G-JAVA-WIFI WiFi, 1xRS232, USB, I2C, 2xADC, 1xGPIO, 6xOpto, Accelerometer, Sleep mode, Hardware Watchdog



MTX-DIN modem Industrial applications DIN rail GSM/GPRS M2M Modem

The MTX-DIN modem family are a new GSM/GPRS and UMTS/HSPA modems designed for industrial environments due to its extended operating temperature range. The Quad/Five Band functionality allows it to operate at all relevant GSM frequencies. It has an intrinsic and powerful TCP/IP communication stack with Internet Services such: TCP, UDP, HTTP, FTP, SMTP, and POP3.

The MTX-DIN is sized in DIN 9 modules for DIN rail housing, containing all the necessary interfaces used in industrial applications: 2 configurable RS232/RS422/RS485 buses, 4 1P1C relays 1P1C, optoisolated inputs/outputs, 0-2.4V or 0-20mA analog inputs, etc. Together with the SIM card reader, it minimizes the need for further hardware components and facilitates integration. The auto power-on feature allows it to restart in case of faulty power conditions. The USB, SPI/I2C and serial ports allow it to be connected to PCs, control boards and other peripherals like GPS, Bluetooth, RFID or other devices.

The MTX-DIN includes Java embedded programmability and a full range of I/Os. The unit can host and control your Java J2ME application allowing you to develop and embed your code directly onto the terminal to shorten time to market and reduce costs by avoiding external components.

It is manufactured using SMD technology following ISO-9001 & ISO-14001 Quality certifications and it is RoHS/WEEE compliant.

MTX-DIN Family



2G models

Over-the-air update Application SW: OTAP Firmware: FOTA (OMA compliant)

JavaTM features CLDC 1.1 HI J2METM profile IMP-NG Secure data transmission with HTTPS, SSL and PKI

Specification GPRS o GPRS class 12 o Mobile station class B o PBCCH support o Coding schemes CS 1-4

CSD data transmission o Up to 14.4kbit/s o V.110 o Non-transparent mode o USSD support



Voice o Triple-rate codec for HR, FR and EFR o Adaptive multi-rate AMR o Basic hands-free operation o Echo cancellation o Noise reduction

Open application resources ARM© Core, Blackfin© DSP Memory: 400KB (RAM) and 1.7MB (Flash) Improved power-saving mode Internal watchdog

Interfaces GSM FME M antenna connector USB 2.0 High Speed port up to 480Mbps SIM card interface 3V, 1.8V Plug-in 52-way (45 usable) 5mm pitch terminal block:

o 2x digital input/outputs o 4x optoisolated inputs o 2x analog inputs o 1x analog output (PWM) o 1x I2C/SPI bus o 2x RS232/RS422/RS485 configurable ports o 4x form C switching contact relays o Speaker and microphone signals available (not

amplified) 2 status LEDs (GSM status and user programmable)


o DC: 9 to 30VDC (typ. 12VDC) o AC: 12 to 24VAC (typ. 24VAC)

Average power consumption (at 12V) o Idle mode (registered DRX=2): 17mA o Speech mode (average): 250mA o GPRS class 12 (average): 570mA

Operating temperature range: -30ºC to +80ºC Dimensions, excluding connectors: 157 x 86 x 58mm Weight: <300 g Powered by Cinterion TC65i module

MTX-DIN Family



3G models












Special features USB interfaces support multiple composite modes and a Linux/Mac compliant mode


Interfaces GSM FME M antenna connector USB 2.0 High Speed port up to 480Mbps SIM card interface 3V, 1.8V Plug-in 52-way (45 usable) 5mm pitch terminal block:


amplified) 2 status LEDs (GSM status and user programmable)

General features Quad-Band GSM/GPRS/EDGE 850/900/1800/1900MHz Five-Band UMTS/HSPA+ 800/850/900/1900/2100MH SIM Application Toolkit, 3GPP release 99 Control via AT commands (Hayes, TS 27.007, TS 27.005) TCP/IP stack access via AT commands Internet services: TCP, UDP, HTTP, FTP, SMTP, POP3 Supply voltage range:

o DC: 9 to 30VDC (typ. 12VDC) o AC: 12 to 24VAC (typ. 24VAC)


Operating temperature range: -30ºC to +80ºC Dimensions, excluding connectors: 157 x 86 x 58mm Weight: <300 g Powered by Cinterion EHS6 module

MTX-DIN Family



MTX

-DIN

-2G

MTX

-DIN

-3G

Cellular modem 2G 3G

RS232/485/422 x2 x2

USB X X

I2C/SPI X X

ADC x2 x2

DAC x1 x1

Optoisolated IO x6 x6

Relay x4 x4

Ordering information

MTX-DIN-2G o Ordering code: 199801103

MTX-IND-3G o Ordering code: 199801139



MTX-IND Family Outdoor industrial applications GSM/GPRS M2M Modem

The MTX-IND modem family are a new GSM/GPRS and UMTS/HSPA modems designed for industrial environments due to its extended operating temperature range and IP65 enclosure. The Quad/Five Band functionality allows it to operate at all relevant GSM frequencies. It has an intrinsic and powerful TCP/IP communication stack with Internet Services such: TCP, UDP, HTTP, FTP, SMTP, and POP3.

The MTX-IND modem contains all the necessary interfaces used in industrial applications: USB, SPI/I2C, 2 configurable RS232/RS422/RS485 buses, 4 1P1C relays, optoisolated inputs/outputs, 0-2.4V or 0-20mA analog inputs, etc. Together with the SIM card reader, it minimizes the need for further hardware components and facilitates integration. The auto power-on feature allows it to restart in case of faulty power conditions.

WiFi, Bluetooth, ZigBee or ISM RF (Wavenis) optional modules (among others) can be installed internally in the MTX-IND devices.

The MTX-IND modem include Java embedded programmability and a full range of I/Os. The unit can host and control your Java J2ME application allowing you to develop and embed your code directly onto the terminal to shorten time to market and reduce costs by avoiding external components.

MTX-IND Family



2G models

Over-the-air update Application SW: OTAP Firmware: FOTA (OMA compliant)

JavaTM features CLDC 1.1 HI J2METM profile IMP-NG Secure data transmission with HTTPS, SSL and PKI

Open application resources ARM© Core, Blackfin© DSP Memory: 400KB (RAM) and 1.7MB (Flash) Improved power-saving mode Internal watchdog

Specifications GPRS o GPRS class 12 o Mobile station class B o PBCCH support o Coding schemes CS 1-4




Voice o Triple-rate codec for HR, FR and EFR o Adaptive multi-rate AMR o Basic hands-free operation o Echo cancellation o Noise reduction o

Interfaces GSM SMA M antenna connector Optional internal 5 band 2.5dBi antenna upon request USB 2.0 High Speed port up to 480Mbps SIM card interface 3V, 1.8V Plug-in 52-way (45 usable) 5mm pitch terminal block:


amplified) 4 status LEDs (GSM status and user programmable) 4x IP68 cable glands


o DC: 9 to 30VDC (typ. 24VDC) o AC: 90-264VAC/120-370VDC (typ. 230VAC)


Operating temperature range: -30ºC to +80ºC Dimensions, excluding connectors: 200 x 120 x 77mm Weight: <500 g Powered by Cinterion TC65i module Internal 1650mAh Li-Po battery

MTX-IND Family



3G models












Special features USB interfaces support multiple composite modes and a Linux/Mac compliant mode


Interfaces GSM SMA F antenna connector Optional internal 5 bands 2.5dBi antenna upon request USB 2.0 High Speed port up to 480Mbps SIM card interface 3V, 1.8V Plug-in 52-way (45 usable) 5mm pitch terminal block:

o 2x digital input/outputs o 4x optoisolated inputs o 2x analog inputs o 1x analog output (PWM) o 1x I2C/SPI bus o 2x RS232/RS422/RS485 configurable ports o 4x form C switching contact relays

4 status LEDs (GSM status and user programmable) 4x IP68 cable glands

General features World Wide Version (default)

o UMTS/HSPA+: Five-Band 800/850/900/1900/2100MHz

o GSM/GPRS/EDGE: Quad band 850/900/1800/1900MHz

3GPP Release 6, 7 SIM Application Toolkit, 3GPP release 99 Control via AT commands (Hayes, TS 27.007, TS 27.005) TCP/IP stack access via AT commands Internet services: TCP, UDP, HTTP, FTP, SMTP, POP3 Supply voltage range:

o DC: 9 to 30VDC (typ. 24VDC) o AC: 90-264VAC/120-370VDC (typ. 230VAC)

Operating temperature range: -30ºC to +85ºC Dimensions, excluding connectors: 200 x 120 x 77mm Weight: <500 g Powered by Cinterion EHS6 module Internal 1650mAh Li-Po battery

MTX-IND Family



MTX

-IND

-2G

MTX

-IND

-2G-

WC2

5M

TX-IN

D-2

G-W

C500

MTX

-IND

-2G-

WC2

5-LC

MTX

-IND

-2G-

WC5

00-L

CM

TX-IN

D-2

G-BT

-WT1

2M

TX-IN

D-2

G-BL

EM

TX-IN

D-2

G-G

PSM

TX-IN

D-3

GM

TX-IN

D-3

G-W

C25

MTX

-IND

-3G-

WC5

00M

TX-IN

D-3

G-W

C25-

LCM

TX-IN

D-3

G-W

C500

-LC

MTX

-IND

-3G-

BT-W

T12

MTX

-IND

-3G-

BLE

MTX

-IND

-3G-

GPS

Cellular modem 2G 2G 2G 2G 2G 2G 2G 2G 3G 3G 3G 3G 3G 3G 3G 3G

RS232/485/422 x2 x2 x2 x1 x1 x2 x2 x2 x2 x2 x2 x1 x1 x2 x2 x2

USB X X X X X X X X X X X X

I2C/SPI *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1 *1

ADC x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2 x2

DAC x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1 x1

Optoisolated IO x6 x6 x6 x6 x6 x6 x6 x6 x6 x6 x6 x6

Relay x4 x4 x4 x4 x4 x4 x4 x4 x4 x4 x4 x4

Coronis/Wavenis Wavecard X X X X X X X X

Bluetooth 2.1 X X

Bluetooth 4.0 Low Energy X X

GPS X X

Internal RF socket expansion X X

Li-Po Battery X X X X X X X X X X X X

*1: upon request

Ordering information

Other RF modules available upon request: XBEE (Digi), ISM 868/900MHz (Amber), WMBUS, WiFi


MTX-IND-2G-WC25 o Ordering code: 199801117


MTX-IND-2G-BT-WT12 o Ordering code: 199801355

MTX-IND-2G-BLE o Ordering code: 199801356

MTX-IND-2G-GPS o Ordering code: 199801321




MTX-IND-3G-BT-WT12 o Ordering code: 199801361

MTX-IND-3G-BLE o Ordering code: 199801362

MTX-IND-3G-GPS o Ordering code: 199801363



MTX-HSPA-PH8-P+G modem M2M UMTS/HSPA modem + GPS receiver

When your application needs top speed UMTS, 14.4 Mbps download speeds and 5.7 Mbps upload speeds (ideal for video transmission), the MTX-HSPA-PH8-P+G modem is the solution based on its HSPA+ 3.5G technology.

The MTX-HSPA-PH8-P+G is a complete modem that encapsulates everything you need in one compact plug-and-play unit. Integration is almost unnecessary because it has its own SIM card reader and a USB port which minimizes the need for further hardware components.

The MTX-HSPA-PH8-P+G is controlled via AT commands in their standard interfaces, USB 2.0 full speed (480Mbps) and a High Speed (up to 920Kbps) Serial RS232 port. They can be used at same time. GPS receiver NMEA data is present without Muxer over USB and serial interfaces.

This modem is intended for use with NDIS/USB drivers for Microsoft® Windows XP™, Windows Vista™ and Windows 7™, also Windows Mobile and CE. It also features a USB CDC-ACM compliant mode to support for example Linux or Android.

The MTX-HSPA-PH8-P+G is RoHs & WEEE compliant and it is manufactured with the ISO 9001 & ISO 14001 Quality certifications.

MTX-HSPA-PH8-P+G modem



GPS features E911 A-GPS functionality via Control Plane Standalone GPS, SUPL prepared GPS dedicated AT command Protocol: NMEA-0183 V2.3 GPS active antenna supply: 3.3V Tracking sensitivity: better than -158dBm No GPS blanking

Specification HSPA o DL speed: max 14.4Mbps o UL speed: max 5.76Mbps

UMTS o DL speed: max 384kbps o UL speed: max 384kbps

EDGE o EDGE class 12 o DL speed: max 237kbps o UL speed: max 237kbps o Mobile station class B o Modulation and coding scheme MCS 1-9

GPRS o GPRS class 12 o DL speed: max 85.6kbps o UL speed: max 85.6kbps o Mobile station class B o Full PBCCH support o Coding schemes CS 1-4

CSD data transmission o GSM data rate 14.4kbps V.110 o UMTS data rate 57.6kbps V.120 o RLP (Non-transparent mode)


Voice o AMR, EFR, FR HR codecs o DTMF supported o CEPT/ANSI supervisory tones supported o Handset, Headset, Hands-free modes o TTY supported

Ordering information MTX-HSPA-PH8-P+G: 199801308

Special features Improves power-saving modes Firmware update via USB and RS232

Interfaces GSM FME M antenna connector USB 2.0 High Speed port up to 480Mbps SIM card interface 1.8V/3V DB9 female connector: complete 8-wire RS232 modem interface

2 status LEDs (GSM status and user programmable) Handset audio interface Plug-in RJ12 power supply connector

General features HSPA 14.4 Mbps Five-Band GSM 800/850/900/1900/2100MHz Quad-Band GSM 850/900/1800/1900MHz EDGE multi-slot class 12 UMTS/HSPA+, 3GPP release 6/7, GSM/GPRS/EDGE, 3GPP release 99

Control via AT commands (Hayes, TS 27.007, TS 27.005) TCP/IP stack access via AT commands Supply voltage range:


Operating temperature range: -20ºC to +85ºC Dimensions, excluding connectors: 78.1 x 66.8 x 37.2mm Weight: <190 g IP30 enclosure Powered by Cinterion PHS8 module

www.mtx-terminals.com www.matrix.es 2014/10 Page 1/2


MTX-LTE-PLS8 modem LTE/UMTS (WCDMA)/HSPA+ Industrial M2M Modem

The MTX-LTE-PLS8 modem is a new industrial M2M family modem ready to work in 4G (LTE) and 3G (CDMA or HSPA+) networks, especially designed for applications that need high speed data transmission rates and low latency. It is a complete 4G/3G/2G radio modem that integrates everything you need for wireless M2M capability in one compact plug-and-play unit. When LTE network is not present, it switches automatically to lower speed mode such as HSPA+, EDGE or GPRS.

The MTX-LTE-PLS8 is a self contained modem with its own SIM card reader and a USB 2.0 High Speed interface, minimizing the need for further hardware development. This modem can be used as a powerful and flexible device that can be integrated in a wide range of telemetry applications that rely on the remote exchange of data, voice, SMS or faxes via the GSM cellular network.

Industrial features: the MTX-LTE-PLS8 modem can be used in industrial applications due to its extended operating temperature range. It also features an automatic restart after shutdown in case of faulty power conditions.

It is manufactured using SMD technology following ISO-9001 & ISO-14001 Quality certifications and it is RoHS/WEEE compliant. PTCRB approval is in process.

MTX-LTE-PLS8 modem

www.mtxm2m.com www.matrix.es 2014/10 Page 2/2


Ordering information MTX-LTE-PLS8-E: 199801322 MTX-LTE-PLS8-US: 199801352

Special features USB interface supports multiple composite modes and a Linux/Mac compliant mode

Firmware update via USB

Specifications LTE Cat.3 DL: max. 100Mbps, UL: max: 50Mbps, 2x2 DL MIMO HSPA+ DL Cat.24/UL Cat.6, Dual Carrier DL: max. 42Mbps, UL: max. 5.76Mbps UMTS DL: max. 384kbps, UL: max. 384kbps EDGE Class 12 data rates DL: max. 237kbps, UL: max. 237kbpsGPRS Class 12 data rates DL: max. 85.6kbps, UL: max. 85.6kbps

Voice Support for LTE via CSFB (circuit-switched fall-back), prepared for VoLTE Supplementary services & USSD support SMS text and PDU mode

Drivers NDIS/USB driver for Microsoft® Windows Vista™, Windows 7™ and Windows 8™

RIL driver for devices based on Android OS™ SB driver for Microsoft® Windows Embedded Compact™

CDC-ACM compliant mode for Linux

Interfaces GSM/WCDMA/LTE FME M antenna connector Secondary Rx Diversity SMA F antenna connector USB 2.0 High Speed port up to 480Mbps SIM card interface 3V, 1.8V Plug-in power supply

General features Quad-Band LTE

o Model MTX-LTE-PLS8-E: 800/900/1800/2600MHz, FDD-Band (20,8,3,7) o Model MTX-LTE-PLS8-US: 700/850/AWS[1700/2100]/1900MHz, FDD-Band (8,3,1)

Tri-Band UMTS (WCDMA) o Model MTX-LTE-PLS8-E: 900/1800/2100MHz, FDD-Band (8,3,1) o Model MTX-LTE-PLS8-US: 850/AWS[1700/2100]/1900MHz, FDD-Band (5,4,2)

Dual-Band GSM/GPRS/EDGE 900/1800MHz (model MTX-LTE-PLS8-E) Quad-Band GSM 850/900/1800/1900MHz (model MTX-LTE-PLS8-US) UMTS/HSPA (FDD) 3GPP Release 8 Rx diversity GSM/GPRS/EDGE 3GPP Release 6 DARP/SAIC SIM Application Toolkit, 3GPP release 99 Control via AT commands (Hayes, TS 27.007, TS 27.005) TCP/IP stack access via AT commands Internet services: TCP, UDP, HTTP, FTP, SMTP, POP3 Supply voltage range:


Average power consumption (at 12V) o Power down: 0.45mA o LTE (LTE Data transfer Band 3 @ +23dBm): 650mA o WCDMA (UMTS/HSDPA Data transfer Band III @ +24dBm): 620mA o GPRS class 12 (average) (4Tx/1Rx): 930mA

Operating temperature range: -30ºC to +85ºC Dimensions, excluding connectors: 78.1 x 66.8 x 37.2mm Weight: <190 g IP30 enclosure



MTX-GATEWAY Industrial Outdoor Linux Programmable gateway with GSM & RF options

The MTX-GATEWAY is an innovative & unlimited power industrial gateway with a complete set of wireless and wired interfaces powered by an ARM9 processor module with embedded Linux and Java VM. By providing an easy integration and powerful interfaces, it avoids further hardware components.

The MTX-GATEWAY embeds an industrial Freescale i.MX28 (TQMa28) module ARM9@454MHz RAM@128MB FLASH@4GB EEPROM@32KB.

Plenty of interfaces: Ethernet, WiFi, USB OTG, RS232, RS485, RS422, CAN, 1-Wire, I2C, GPIOs, relays and a VGA video port; it can be used in infinite M2M and IoT applications. Its internal mini-PCIe slot can accommodate any communication board you need: LTE & GPS, HSPA+ & GPS, GPRS, GPS, WiFi, Bluetooth 2.1 or Bluetooth Low Energy.

Internal GPS and/or WiFi (b/g/n) modules can be optionally ordered, as well as other RF modules such as: Bluetooth 2.1, Bluetooth Low Energy, ZigBee, Wireless MBus, 868/900MHz RF-ISM, Wavenis, XBEE, EnOcean, Z-Wave, 6LoWPAN etc.

It is manufactured following the ISO-9001 & ISO-14001 Quality certifications and it iss RoHS/WEEE compliant.

MTX-GATEWAY Family



Optional modules and expansions Other MiniPCIe socket modules available:

o LTE & GPS o HSPA+ & GPS o WiFi + Bluetooth

RF module socket modules available:

o GPS receiver o Bluetooth v2.1 EDR Class 2 o Bluetooth Low Energy o ZigBee o ISM 868/900MHz o Wavenis/Coronis 25/500mW o Wireless MBUS/KNX o XBEE socket o Any other technology upon request

Ordering information 199802101: MTX-GATEWAY 199802102: MTX-GATEWAY-2G 199802103: MTX-GATEWAY-3G 199802104: MTX-GATEWAY-4G 199802106: MTX-GATEWAY-OEM 199802111: MTX-GATEWAY-LC 199802107: MTX-GATEWAY-LC-OEM

Processor Powered by TQ-Components TQMa28 module

o Freescale i.MX28 (ARM9 architecture) o 454MHz clock CPU freq o 128MB DDR2 o 4GB eMMC Flash o 32KB EEPROM o Linux Kernel 3.10 o Java VM loaded

Interfaces Celullar modem 2G/3G/4G (MiniPCIe socket) (*) Ethernet 10/100 BaseT RJ45 Internal Wi-Fi b/g/n (AP support) (*) Internal MiniPCIe socket for M2M communications (See available modules below) USB 2.0 OTG HD-Dsub15 (also available as plug-In type terminal block):

o 2x RS232 (2 wire) (*) o 1x RS232/485/422 (4 wire) o 1x GPIO (3V) o 1-Wire interface (*) o CAN o Vout (24VDC)

Relay with plug-in type terminal blocks: o 2x 8A/250VAC relays (by default) (*) o 1x 1A/30VDC Latch relay (upon request)

Operating status LEDs SIM card interface 1.8V/3V Internal RF module socket (*). See available modules below VGA connector (upon request) (*)

(*): Depending on model, see table below

General features IP65 enclosure Supply voltage range:

o AC input: 90 to 264VAC / 120-370VDC o DC input: 24V (7 to 50VDC)

Operating temperature range: -40ºC to +85ºC Dimensions, excluding connectors or cable glands: 201 x 163 x 98mm Weight: <500 g

MTX-GATEWAY Family



Features by model

MTX

-GAT

EWAY

MTX

-GAT

EWAY

-2G

MTX

-GAT

EWAY

-3G

MTX

-GAT

EWAY

-4G

MTX

-GAT

EWAY

-OEM

MTX

-GAT

EWAY

-LC

MTX

-GAT

EWAY

-LC-

OEM

Celullar modem 2G 3G 4GRS232/485/422 (4-wire) 1x 1x 1x 1x 1x 1x 1x

RS232 (2-wire) 2x 2x 2x 2x 2x 1x 1x

USB OTG X X X X X X X

Ethernet X X X X X X X

WiFi X X X X X

CAN 2.0B X X X X X X X

1-Wire X X X X X

Relays 2x 2x 2x 2x 2x 1x 1x

GPIO 1x 1x 1x 1x 1x 1x 1x

Internal RF module (*1) (*1) (*1) (*1) (*1)

GPS module (*1) (*1) (*1) (*1) (*1)

VGA (*1) (*1) (*1) (*1) (*1)

(*1): upon request



MTX-GTW Linux Programmable M2M-IoT Gateway with GSM & RF options

The MTX-GTW gateway is an innovative & unlimited power gateway with a complete set of wireless and wired interfaces, powered by an ARM9 processor module with embedded Linux and Java VM. By providing an easy integration and powerful interfaces, it avoids further hardware components.

The MTX-GTW embeds an industrial Freescale i.MX28 (TQMa28) module ARM9@454MHz RAM@128MB FLASH@4GB EEPROM@32KB.

Plenty of interfaces: Ethernet, WiFi, USB OTG, RS232/RS485/RS422, CAN, GPIOs; it can be used in infinite M2M and IoT applications. Its internal mini-PCIe slot can accommodate any communication board you need: LTE & GPS, HSPA+ & GPS, GPRS, GPS, WiFi, Bluetooth 2.1 or Bluetooth Low Energy.

Internal GPS, Bluetooth and/or WiFi (b/g/n) modules can be optionally ordered.

It is manufactured following the ISO-9001 & ISO-14001 Quality certifications and it is RoHS/WEEE compliant.

MTX-GTW Family



Ordering information 199802110: MTX-GTW Ethernet, Wifi b/g/n, USB 2.0 OTG, 1xRS232/422/485 (4-wire), 2x RS232 (2-wire), CAN TBD: MTX-GTW-LC Ethernet, USB 2.0 OTG, 1xRS232/422/485 (4-wire), 1x RS232 (2-wire), CAN TBD: MTX-GTW-2G (available on Q1 2015) GSM/GPRS modem, Ethernet, Wifi b/g/n, USB 2.0 OTG, 1xRS232/422/485 (4-wire), 1x RS232 (2-wire), CAN, Latch Relay, 3-axis accelerometer, Optoisolated count input TBD: MTX-GTW-3G (available on Q1 2015) UMTS/HSPA modem, Ethernet, Wifi b/g/n, USB 2.0 OTG, 1xRS232/422/485 (4-wire), 1x RS232 (2-wire), CAN, Latch Relay, 3-axis accelerometer, Optoisolated count input TBD: MTX-GTW-4G (available on Q1 2015) LTE modem, Ethernet, Wifi b/g/n, USB 2.0 OTG, 1xRS232/422/485 (4-wire), 1x RS232 (2-wire), CAN, Latch Relay, 3-axis accelerometer, Optoisolated count input Contact us for more information about other options

Optional modules and expansions Other MiniPCIe socket modules available:

o LTE & GPS o HSPA+ & GPS o WiFi + Bluetooth

Processor Powered by TQ-Components TQMa28 module

o Freescale i.MX28 (ARM9 architecture) o 454MHz clock CPU freq o 128MB DDR2 o 4GB eMMC Flash o 32KB EEPROM o Linux Kernel 3.14 o Java VM loaded

Interfaces Cellular modem 2G/3G/4G (*) Ethernet 10/100 BaseT RJ45 Wi-Fi b/g/n with external antenna (*) USB 2.0 OTG DB15 HD female connector:

o 1x RS232/485/422 (4 wire) o 2x RS232 (2 wire) (*) o 1x CAN 2.0B o 1x 1-Wire (optional) (*) o 1x Latch Relay 1A 30VDC (optional) (*) o Count input (optoisolated) (*) o Optoisolated I/Os (optional) (*) o 2x Analog inputs (0-2.4V or 0-20mA) (optional ) (*) o 1x Analog output (optional) (*)

Operating status LEDs SIM card interface 1.8V/3V (DualSIM optional) Optional MFF2 SIM module (*) 3-axis accelerometer (*) Optional internal Gyroscope + Magnetometer module (*) (*) Depending on model. See table below

General features Supply voltage range:

o DC input: 12V (7 to 50VDC) Operating temperature range: -40ºC to +85ºC Dimensions, excluding connectors or cable glands: 78.1 x 66.8 x 37.2mm Weight: <190 g IP30 enclosure

MTX-GTW Family



Features by model

MTX

-GTW

MTX

-GTW

-2G

MTX

-GTW

-3G

MTX

-GTW

-4G

MTX

-GTW

-LC

Celullar modem 2G 3G 4GRS232/485/422 (4-wire) x1 x1 x1 x1 x1

RS232 (2-wire) x2 x1 x1 x1 x1USB OTG X X X X XEthernet X X X X X

WiFi X X X XCAN 2.0B X X X X X

Count input (optoisolated) X X X3-axis accelerometer X X X

Relays x1 x1 x1Dual SIM (*1) (*1) (*1)

MFF2 SIM (*1) (*1) (*1)Gyroscope + magnetometer (*1) (*1) (*1)

GPS module (*1) (*1) (*1)1-Wire (*2) (*2) (*2)

Opto IO (*2) (*2) (*2)Analog IO (*2) (*2) (*2)

(*1): upon request(*2): upon request. This may affect other options availability such as: 1-Wire, OptoIO, Count input, Relays, Analog IO

www.mtx terminals.com www.mtxm2m.com www.matrix.es 2015/01 Page 1/2MTX Terminals® by MATRIX ELECTRONICA S.L.U.

MTX Router Titan 3GIndustrial Outdoor Router with GSM/GPRS/3G and RF options

The MTX Router Titan 3G is an innovative industrial router with unlimited that comprises a complete set ofwireless and wired interfaces powered by an ARM9 processor module. By providing an easy integration andpowerful interfaces, it avoids further hardware components.

Plenty of interfaces: Ethernet, WiFi, USB, RS232, 1 Wire, I2C, GPIOs and relays; it can be used in infinite M2Mand IoT applications. A 3G (UMTS/HSPA) modem is attached internally.

The MTX Router Titan 3G also includes advanced functionalities such as:

DHCP server, NAT, WiFi Access Point, CSD call manager, 3G to RS232/USB gateways, external sensordataloggers (temperature, distance, Modbus RTU, Waveflow RS868 MHz for metering applications),DynDNS/NoIP client, relay control, GSM cell positioning, remote firmware upgrade, among others.

MTX Router Titan 3G


InterfacesEthernet 10/100 BaseT RJ45Internal Wi Fi b/g/n (AP support)USB 2.0 (compatible with FTDI and ACM USB devices)HD Dsub15 (also available as plug In type terminal block):

o 2x RS232 (2 wire)o 1x RS232 (4 wire) / RS485o 1x Digital inputo 1xCANo Out 3.3V, 5V, 24V

Relay with plug in type terminal blocks:o 2x 8A/250VAC relays

Operating status LEDsSIM card interface 1.8V/3V

SpecificationsHSPA (3GPP Release 6,7)

o DL 7.2Mbps, UL 5.7Mbpso HSDPA Cat.8 / HSUPA Cat.6 data rateso Compressed mode (CM) according to 3GPP TS25.212

UMTS (3GPP Release 4)o PS data rate – 384 kbps DL, UL 384kbpso CS data rate – 64 kbps DL, UL 64kbps

HSPA (3GPP Release 6,7)o DL 7.2Mbps, UL 5.7Mbpso HSDPA Cat.8 / HSUPA Cat.6 data rates

GPRSo GPRS class 12o Mobile station class Bo PBCCH supporto Coding schemes CS 1 4

EGPRSo Multislot class 12o EDGE E2 power class for 8PSK

CSD data transmissiono Up to 9.6kbpso V.110o Non transparent modeo USSD support

SMSo Point to point MO and MTo SMS cell broadcasto Text and PDU mode

Ordering informationMTX Router Titan 3G (EU): 199.802.114MTX Router Titan 3G (US): 199.802.117

General features3G router

o UMTS/HSPA+900/2100MHz (EU version)850/1900MHz (US version)

o GSM/GPRS/EDGE:900/1800MHz (EU version)850/1900MHz (US version)

3G connectivity supervisor to maintain connectionalways activeIP65 enclosureDHCP server (for Ethernet and WiFi interfaces)NAT / IP FirewallUp to 4 3G to RS232/USB simultaneous gatewaysCSD call manager (for metering applications)External device manager:

o Temperature sensorsDatalogger, SMS alarms, relay activation, etc. Data can be sent toa webserver in JSON format

o Distance sensorsDatalogger, SMS alarms, relay activation, etc. Data can be sent toa webserver in JSON format

o Modbus RTU devices.Datalogger. Data can be sent to a webserver in JSON format

o Waveflow 868MHz WavenisDatalogger. Data can be sent to a webserver in JSON format

Modem control via AT commands (Hayes, TS 27.007, TS27.005)DynDNS, NoIP and Private DNS servicesRemote relay controlGSM cell positioningProgrammable autoresetInternal configuration webserver (all logos and picturescan be customized by user)Operating status LEDsNTP time/date synchronizationUser permissions and configuration backupRemote firmware upgradeSupply voltage range:

o AC input: 90 to 264VAC / 120 370VDCo DC input: +7Vdc to +50Vdc

Operating temperature range: 40ºC to +85ºCDimensions, excluding connectors or cable glands: 201 x163 x 98mmWeight: <500 g

Optional modules and expansionsWavenis 25/500mW (for RF metering applications)MTX Temp (temperature sensor)Maxbotix (distance sensor)


MTX Router Titan 3G miniIndustrial Router with GSM/GPRS/3G and RF options

The MTX Router Titan 3G mini is an innovative industrial router with unlimited that comprises a completeset of wireless and wired interfaces powered by an ARM9 processor module. By providing an easy integrationand powerful interfaces, it avoids further hardware components.

Plenty of interfaces: Ethernet, WiFi, USB, RS232, 1 Wire, I2C, GPIOs and relays; it can be used in infinite M2Mand IoT applications. A 3G (UMTS/HSPA) modem is attached internally.

The MTX Router Titan 3G mini also includes advanced functionalities such as:

DHCP server, NAT, WiFi Access Point, CSD call manager, 3G to RS232/USB gateways, external sensordataloggers (temperature, distance, Modbus RTUs), DynDNS/NoIP client, relay control, GSM cell positioning,remote firmware upgrade, among others.

MTX Router Titan 3G mini


Optional modules and expansionsWaveport 25/500mW (for RF metering applications)MTX Temp (temperature sensor)Maxbotix (distance sensor)

General features3G router

o UMTS/HSPA+900/2100MHz (EU version)850/1900MHz (US version)

o GSM/GPRS/EDGE:900/1800MHz (EU version)850/1900MHz (US version)

3G connectivity supervisor to maintain connectionalways activeDHCP server (for Ethernet and WiFi interfaces)NAT / IP FirewallUp to 4 3G to RS232/USB simultaneous gatewaysCSD call manager (for metering applications)External device manager:

o Temperature sensorsDatalogger, SMS alarms, relay activation, etc. Data can be sent toa webserver in JSON format

o Distance sensorsDatalogger, SMS alarms, relay activation, etc. Data can be sent toa webserver in JSON format

o Modbus RTU devices.Datalogger. Data can be sent to a webserver in JSON format

o Waveflow 868MHz WavenisDatalogger. Data can be sent to a webserver in JSON format

Modem control via AT commands (Hayes, TS 27.007, TS27.005)DynDNS, NoIP and Private DNS servicesRemote relay controlGSM cell positioningProgrammable autoresetInternal configuration webserver (all logos and picturescan be customized by user)Operating status LEDsNTP time/date synchronizationUser permissions and configuration backupRemote firmware upgradeSupply voltage range:

o DC input: +7Vdc to +50VdcOperating temperature range: 40ºC to +85ºCDimensions, excluding connectors or cable glands: 201 x163 x 98mmWeight: <500 g

InterfacesEthernet 10/100 BaseT RJ45Internal Wi Fi b/g/n (AP support)USB 2.0 (compatible with FTDI and ACM USB devices)HD Dsub15

o 1x RS232 (2 wire)o 1x RS232 (4 wire) / RS485o 1x Digital inputo 1x Relay (1A)o 1xCAN

Operating status LEDsSIM card interface 1.8V/3V

Ordering informationMTX Router Titan 3G mini (EU): 199.802.115MTX Router Titan 3G mini (US): 199.802.118

SpecificationsHSPA (3GPP Release 6,7)

o DL 7.2Mbps, UL 5.7Mbpso HSDPA Cat.8 / HSUPA Cat.6 data rateso Compressed mode (CM) according to 3GPP TS25.212

UMTS (3GPP Release 4)o PS data rate – 384 kbps DL, UL 384kbpso CS data rate – 64 kbps DL, UL 64kbps

HSPA (3GPP Release 6,7)o DL 7.2Mbps, UL 5.7Mbpso HSDPA Cat.8 / HSUPA Cat.6 data rates

GPRSo GPRS class 12o Mobile station class Bo PBCCH supporto Coding schemes CS 1 4

EGPRSo Multislot class 12o EDGE E2 power class for 8PSK

CSD data transmissiono Up to 9.6kbpso V.110o Non transparent modeo USSD support

SMSo Point to point MO and MTo SMS cell broadcasto Text and PDU mode

www. mtxm2m.com www.matrix.es 2014/07 Page 1/2


MTX-ROUTER Industrial Cellular Router for M2M applications

The MTX-ROUTER terminal is a cellular terminal device that provides data transmission function by public WCDMA/HSDPA/HUSPA/HSPA+ networks.

The MTX-ROUTER is powered by a 32-bits ARM CPU with and embedded real time operating system and web interface allowing you to connect your existing Serial or Ethernet devices to the cellular network with a very basic configuration.

Industrial featured: the router can be used in industrial applications due to its extended operating temperature range such as intelligent transportation system, smart grid, industrial automation, telemetry, finance, POS, water supply, port, weather stations and so on.

It is manufactured using SMD technology following ISO-9001 & ISO-14001 Quality certifications and it’s RoHS/CE compliant.

MTX-ROUTER



Software feature DHCP server and client Firewall features Port forwarding , NAT, DMZ host, URL block Schedule reboot, schedule online and offline. Support multiple DDNS provide services. Support local and remote firmware upgrades, import and export configuration files. Serial to cellular tunneling.

Specification 3G

o HSUPA:5.76Mbps(Upload speed) o HSDPA:7.2Mbps(Download speed) o UMTS:384Kbps (DL/UL) o HSPA+: 21Mbps(Download speed)


SMS o Remote controlled by SMS(optional GPRS model)

Reset Coverage Public IP address info.

WIFI (optional) o 802.11b/g/n o AP mode, Client mode, Adhoc mode, Repeater,

Bridge and WDS mode o WEP, WPA and WPA2 Encryption o Radius authentication support o MAC address filter

Ordering information MTX-ROUTER GPRS

o Ordering code: 502300020 o Includes accessories: antenna and power adaptor o Warranty 1 year (additional years under request)

MTX-ROUTER 3G o Ordering code: 502300021 o Includes accessories: antenna and power adaptor o Warranty 1 year (additional years under request)

MTX-ROUTER 3G WIFI o Ordering code: 502300022 o Includes accessories: antenna and power adaptor o Warranty 1 year (additional years under request)

Interfaces 10/100 Mbps Ethernet port (RJ45) Serial port (RJ45 to DB9 adapter included) Standard SMA female interface SIM card interface 3V, 1.8V Power input Jack connector 6 status LEDs:

o Link/ACT o System o Alarm o Online o Coverage o Power

Reset button WIFI SMA male interface (optional)

General features Quad-Band GSM 850/900/1900/2100MHz GPRS multi-slot class 12 SIM Application Toolkit, 3GPP release 99 Control via Web interface or CLI Industrial 32bits CPU Internet services: TCP, UDP, HTTP, FTP, SMTP, POP3, SNMP, TELNET, ICMP, etc. Supply voltage range:

o Power range: 5 to 35VDC o Standard: 12VDC

Average power consumption (at 12V) o Power down: 0.45mA

Operating temperature range: -35ºC to +75ºC Operating humidity: 95% Dimensions, excluding connectors: 157 x 97 x 25 mm Weight: 440g IP 30 iron housing Din Rail and Wallmount kit included CE Certificated



MTX-ROUTER 4 ETH PORTS Industrial Cellular Router for M2M applications

The MTX-ROUTER terminal is a cellular terminal device that provides data transmission function by public WCDMA/HSDPA/HUSPA/HSPA+ networks.

The MTX-ROUTER is powered by a 32-bits ARM CPU with and embedded real time operating system and web interface allowing you to connect your existing Serial or Ethernet devices to the cellular network with a very basic configuration.

Industrial featured: the router can be used in industrial applications due to its extended operating temperature range such as intelligent transportation system, smart grid, industrial automation, telemetry, finance, POS, water supply, port, weather stations and so on.

It is manufactured using SMD technology following ISO-9001 & ISO-14001 Quality certifications and it’s RoHS/CE compliant.

MTX-ROUTER 4 ETH PORTS



Software feature DHCP server and client Firewall features Port forwarding , NAT, DMZ host, URL block Schedule reboot, schedule online and offline. Support multiple DDNS provide services. Support local and remote firmware upgrades, import and export configuration files. Serial to cellular tunneling.

Specification 4G

o LTE/HSPA+:100Mbps(Download speed) 50Mbps(Upload speed)

3G o HSUPA:5.76Mbps(Upload speed) o HSDPA:7.2Mbps(Download speed) o UMTS:384Kbps (DL/UL) o HSPA+: 21Mbps(Download speed)


WIFI (optional)

o 802.11b/g/n o AP mode, Client mode, Adhoc mode, Repeater,

Bridge and WDS mode o WEP, WPA and WPA2 Encryption o Radius authentication support o MAC address filter

Ordering information MTX-ROUTER 3G 4 PORTS WIFI

o Ordering code: 502300023 o Includes accessories: antenna and power adaptor o Warranty 1 year (additional years under request)

MTX-ROUTER LTE 4 PORTS o Ordering code: 502300030 o Includes accessories: antenna and power adaptor o Warranty 1 year (additional years under request)

MTX-ROUTER LTE 4 PORTS WIFI o Ordering code: 502300031 o Includes accessories: antenna and power adaptor o Warranty 1 year (additional years under request)

Interfaces 4 x 10/100 Mbps Ethernet ports (RJ45) Serial port (RJ45 to DB9 adapter included) Standard SMA female interface SIM card interface 3V, 1.8V Power input Jack connector 6 status LEDs:

o Link/ACT o System o Alarm o Online o Coverage o Power

Reset button WIFI SMA male interface

General features LTE Penta-Band 800/900/1800/2100/2600MHz Quad-Band GSM 850/900/1900/2100MHz GPRS multi-slot class 12 SIM Application Toolkit, 3GPP release 99 Control via Web interface or CLI Industrial 32bits CPU Internet services: TCP, UDP, HTTP, FTP, SMTP, POP3, SNMP, TELNET, ICMP, etc. Supply voltage range:

o Power range: 5 to 35VDC o Standard: 12VDC

Average power consumption (at 12V) o Power down: 0.45mA

Operating temperature range: -35ºC to +75ºC Operating humidity: 95% Dimensions, excluding connectors: 206 x 135 x 28 mm Weight: 790g IP 30 iron housing Din Rail and Wallmount kit included CE Certificated



MTX-TUNNEL Enhanced Transparent Cellular Gateway

MTX-TUNNEL is an embedded software application that can be installed onto any JAVA enabled terminal from MTX-TERMINALS modems family, designed for communication with remote devices which has RS232, RS485, I2C or SPI ports.

The MTX-TUNNEL is used to create a transparent gateway (i.e. tunnel) from the serial port to the cellular network. It has a lot of extra features such as Web server, Telnet, SMS alarms, DynDNS, firewall, SSL security, ModBus monitoring, and ISM 868MHz remote monitoring of sensors

Frequently, remote meters, network switches, routers and other devices need to connect to a network, but they only have a RS232 port and the only possible way to reach them is by using the cellular network.

MTX-TUNNEL is a ready-to-go solution for such cases: it acts as a transparent RS232. You will see your remote devices as if they were directly attached to your computer, which is very useful in remote control and remote metering M2M scenarios; for example, input/outputs read/control, analog input reading, relay control, control over external SPI/I2C bus, remote reading of GPS position, control and configuration, etc.

MTX-TUNNEL



Supported devices MTX-65i o 2G generic serial-cellular tunnel (gateway) plus

telemetry + SMS control MTX-65i-RS485 o 2G tunnel, 1xRS485 and 1xRS232 port

MTX-65i-ULP o 2G tunnel ideal for Ultra Low Power applications

(2.5μA) MTX-65i+G V6 o 2G tunnel with GPS positioning

MTX-65i+G+B V7 o 2G tunnel with GPS positioning and battery

MTX-IND-DIN o 2G tunnel with RS232/485/422 bus and relay outputs

MTX-IND-2G o 2G tunnel with RS232/485/422, relay outputs, RF

communications and main 220/110VAC supply MTX-3G-JAVA o 3G generic serial-cellular tunnel (gateway) plus

telemetry + SMS control MTX-3G-JAVA-RS485 o 3G tunnel, 1xRS485 and 1xRS232 port

MTX-3G-JAVA-GPS o 3G tunnel with GPS positioning

MTX-3G-JAVA-BAT o 3G tunnel with battery

MTX-3G-JAVA-GPS-BAT o 3G tunnel with GPS positioning and battery

MTX-3G-JAVA-ULP o 3G tunnel ideal for Ultra Low Power applications

(2.5μA) MTX-3G-JAVA-ULP-GPS o 3G tunnel ideal for Ultra Low Power applications

(2.5μA) with GPS positioning MTX-IND-3G o 3G tunnel with RS232/485/422, relay outputs, RF

communications and main 220/110VAC supply Ordering information MTX-Tunnel: 199801218

Custom versions available upon request

Features GPRS/UMTS/HSPA-Serial tunnel (2G/3G)

o TCP client/server o UDP client/server

GPRS/UMTS/HSPA connection modes (2G/3G) o Permanent o Under request

Incoming SMS (any or only authorized phonenumbers) Incoming missed call (any or only authorizedphone numbers)Change on a digital input portAnalog input out of selected level window (MIN, MAX)Incoming data present on RS232/485 port (only in TCP server mode)

Web server FTP client Telnet SMS alarms Full control using SMS DynDNS/No-IP Private DNS Firewall Automatic date/time synchronization GPRS/UMTS/HSPA-I2C/SPI tunnel HTTP-Serial tunnel Serial (RS232/485)-SMS Tunnel Ultra Low Power ULP Tunnel GPRS/UMTS/HSPA telemetry transmission SSL security ModBus monitoring ISM 868MHz sensors remote monitoring (Wavenis) API to integrate MTX-Tunnel in end applications Bitcoin compatible

MTX-TUNNEL



Remote sensors hub

Remote metering

Modbus monitoring

MTX-TUNNEL



Vending

Bitcoin payments



MOD-XT65i Module Intelligent Java enabled applications GSM/GPRS module

The MOD-XT65i module is an innovative and powerful solution for developers based on a Cinterion TC65i module, enabling GSM Voice, SMS, fax and 2G (GSM/GPRS) data transmission. It has an intrinsic TCP/IP communication stack with Internet Services such: TCP, UDP, HTTP, FTP, SMTP, and POP3.

The MOD-XT65i is Java J2ME programmable and has a complete set of interfaces (UART, USB, GPIO, I2C, I2S, Analog-to-Digital and Digital-to-Analog converter) minimizing the need for further hardware components, shortening time to market and reducing costs. It also has a wide range of options allowing it to be used in infinite M2M applications.

The MOD-XT65i also includes a high sensitivity GPS receiver connected to the GSM engine. AGPS, DGPS and SBAS (EGNOS, WAAS) techniques are enabled. GPS JAVA APIs can be used. NMEA PARSER is also available.

Industrial features: the terminal can be used in industrial applications due to its extended operating temperature range. It also features an automatic restart after shutdown in case of faulty power conditions.

It is manufactured following ISO-9001 & ISO-14001 Quality certifications and it is RoHS/WEEE compliant.

MOD-XT65i Module



Ordering information MOD-XT65i

o Ordering code: 199801129

JavaTM features CLDC 1.1 HI J2METM profile IMP-NG Software watchdog for applications Additional accessible periphery for Java applications: o I/O pins, I2C, SPI interfaces, ADC/DAC o Serial interfaces (API): ASC0, ASC1

Over-the-air update Application SW: OTAP

Open application resources ARM© Core, Blackfin© DSP Memory: 400KB (RAM) and 1.7MB (Flash) Improved power-saving mode

Specification GPS o Receiver: 22-channel, L1 1575.42MHz o Accuracy position: <2.5m 50% o Position with DGPS/SBAS: <2.0m 50% o Support of SBAS (WAAS/EGNOS/MSAS) data o GPS active antenna supply: 3.0V o A-GPS enabled o Tracking sensitivity: -160dBm (with external antenna) o Date WGS-84 o Start-up time:

Hot start: <2s Warm start: 35s Cold start: 38s1x RS232 (2-wires) port

o Protocols: NMEA-183. Baudrate: 9600 default, configurable 4800, 19200, 38400, 57600, 115200

o NMEA-0183 Messages: GGA, GSA, GSV, RMC, CHN, GLL, VTG, ZDA.





Voice o Triple-rate codec for HR, FR and EFR o Adaptive multi-rate AMR o Basic hands-free operation o Echo cancellation o Noise reduction

General features Connector and mounting holes compatible with Cinterion TC65i, TC63i, PH8 (3V), EU3 and XT65i modules

Quad-Band GSM 850/900/1800/1900MHz GPRS multi-slot class 12 SIM Application Toolkit, 3GPP release 99 Control via AT commands (Hayes, TS 27.007, TS 27.005) TCP/IP stack access via AT commands Internet services: TCP, UDP, HTTP, FTP, SMTP, POP3 Supply voltage range:

o Maximum: 3.3 to 4.5VDC o Recommended: 4.1VDC

Average power consumption (at 4.1V) o Power down: 1mA o Sleep mode (registered DRX=2): 2.6mA o Idle mode (DRX=2, USB active): 37mA o GPRS class 12 and GPS tracking: 202mA

Operating temperature range: -30ºC to +85ºC 80-pin 0.5mm pitch board-to-board connector (Molex 52991-0808):

o I2C interface (3V) o I2S interface (3V) o 1x USB 2.0 port up to 480Mbps o 1x 8-wire UART (3V) o 1x 4-wire UART (3V) o 2x analog inputs (0 to 3V) o 1x analog output (0 to 3V) o 10x GPIOs (3V)

Powered by Cinterion TC65i module

MOD-XT65i Module



Board-to-board interface connector pinout, block diagram & dimensions

1 GND GND 80 2 ADC1_IN DAC_OUT 79 3 ADC2_IN PWR_IND 78 4 GND RESERVED 77 5 GPIO10 GPIO9 76 6 GPIO8 SPICS 75 7 SPIDI GPIO4 74 8 GPIO7 GPIO3 73 9 GPIO6 GPIO2 72

10 GPIO5 GPIO1 71 11 I2CCLK I2CDAT 70 12 VUSB_IN USB_DP 69 13 DAI5 USB_DN 68 14 ISENSE VSENSE 67 15 DAI6 VMIC 66 16 CCCLK EPN2 65 17 CCVCC EPP2 64 18 CCIO EPP1 63 19 CCRST EPN2 62 20 CCIN MICN2 61 21 CCGND MICP2 60 22 DAI4 MICP1 59 23 DAI3 MICN1 58 24 DAI2 AGND 57 25 DAI1 IGT 56 26 DAI0 EMERG_OFF 55 27 BATTEMP DCD0 54 28 SYNC CTS1 53 29 RESERVED CTS0 52 30 RXD0 RTS1 51 31 RESERVED DTR0 50 32 TXD0 RTS0 49 33 VDDLP DSR0 48 34 VCHARGE RING0 47 35 CHARGEGATE VEXT 46 36 GND BATT+ 45 37 GND BATT+ 44 38 GND BATT+ 43 39 GND BATT+ 42 40 GND BATT+ 41



MOD-3G-JAVA Module Intelligent Java enabled applications HSPA module

The MOD-3G-JAVA module is an innovative and powerful solution for developers based on a Cinterion EHS6 module, enabling GSM Voice, SMS, fax and 3G (UMTS/HSPA) high speed data transmission. It has an intrinsic TCP/IP communication stack with Internet Services such: TCP, UDP, HTTP, FTP, SMTP, and POP3.

The MOD-3G-JAVA is Java J2ME programmable and has a complete set of interfaces (UART, USB, GPIO, I2C, I2S, Analog-to-Digital and Digital-to-Analog converter) minimizing the need for further hardware components, shortening time to market and reducing costs. It also has a wide range of options allowing it to be used in infinite M2M applications.

The MOD-3G-JAVA also has an internal expansion connector which allows connectivity to an optional RF card:

GPS/GLONASS: allows track & location applications Wavenis Wavecard: ISM 868MHz communications Bluetooth 2.1 and Low Energy ZigBee

Industrial features: the terminal can be used in industrial applications due to its extended operating temperature range. It also features an automatic restart after shutdown in case of faulty power conditions.

MOD-3G-JAVA Module







Specification HSPA (3GPP Release 6,7) o DL 7.2Mbps, UL 5.7Mbps o HSDPA Cat.8 / HSUPA Cat.6 data rates o Compressed mode (CM) according to 3GPP TS25.212







Ordering information MOD-3G-JAVA-EHS6 (without RF module connector)

o Ordering code: 199801323 MOD-3G-JAVA-EHS6-RF-WG (with connector for GPS/Wavecard module)

o Ordering code: 199801324 MOD-3G-JAVA-EHS6-RF (with connector for Bluetooth 2.1, BLE, Zigbee or ISM RF module)

o Ordering code: 199801336 Ask [email protected] for RF modules info

General features Connector and mounting holes compatible with Cinterion TC65i, TC63i, PH8 (3V), EU3 and XT65i modules

World Wide Version o UMTS/HSPA+: Five-Band

800/850/900/1900/2100MHz o GSM/GPRS/EDGE: Quad band

850/900/1800/1900MHz 3GPP Release 6, 7 SIM Application Toolkit, 3GPP release 99 Control via AT commands (Hayes, TS 27.007, TS 27.005) TCP/IP stack access via AT commands Internet services: TCP, UDP, HTTP, FTP, SMTP, POP3 Supply voltage range:

o Maximum: 3.3 to 4.5VDC o Recommended: 4.1VDC

Average power consumption (at 4.1V) o Power down: 1mA o Sleep mode (registered DRX=2): 2.6mA o Idle mode (DRX=2, USB active): 37mA o HSPA data transfer Band VIII (average): 581mA

Operating temperature range: -30ºC to +85ºC 80-pin 0.5mm pitch board-to-board connector (Molex 52991-0808):

o I2C interface (3V) o I2S interface (3V) o 1x USB 2.0 port up to 480Mbps o 1x 8-wire UART (3V) o 1x 4-wire UART (3V) o 2x analog inputs (0 to 3V) o 1x analog output (0 to 3V) o 10x GPIOs (3V)

Powered by Cinterion EHS6 module

MOD-3G-JAVA Module



Board-to-board interface connector pinout, block diagram & dimensions

1 GND GND 80 2 ADC1_IN DAC_OUT 79 3 ADC2_IN PWR_IND 78 4 GND RESERVED 77 5 GPIO10 GPIO9 76 6 GPIO8 RESERVED 75 7 RESERVED GPIO4 74 8 GPIO7 GPIO3 73 9 GPIO6 GPIO2 72

10 GPIO5 GPIO1 71 11 I2CCLK I2CDAT 70 12 VUSB_IN USB_DP 69 13 RESERVED USB_DN 68 14 RESERVED RESERVED 67 15 RESERVED RESERVED 66 16 CCCLK RESERVED 65 17 CCVCC RESERVED 64 18 CCIO RESERVED 63 19 CCRST RESERVED 62 20 CCIN RESERVED 61 21 CCGND RESERVED 60 22 RESERVED RESERVED 59 23 CLKDAI RESERVED 58 24 FSCDAI RESERVED 57 25 RXDAI IGT 56 26 TXDAI EMERG_OFF 55 27 RESERVED DCD0 54 28 SYNC CTS1 53 29 RXD1 CTS0 52 30 RXD0 RTS1 51 31 TXD1 DTR0 50 32 TXD0 RTS0 49 33 VDDLP DSR0 48 34 RESERVED RING0 47 35 RESERVED VEXT 46 36 GND BATT+ 45 37 GND BATT+ 44 38 GND BATT+ 43 39 GND BATT+ 42 40 GND BATT+ 41

www.mtxm2m.com www.matrix.es 2014/05 Page 1/2MTX Terminals® by MATRIX ELECTRONICA S.L.U.

MTX ACC AccesoriesPower Supplies, antennas and connection cables

MTX Accessories

www.mtxm2m.com www.matrix.es 2014/05 Page 2/2


AntennasGSM/GPRS antennas

European Frequencies:GSM 900: from 890MHz to 960MHzDCS 1800: from 1710MHz to 1879MHz

American FrequenciesGSM 850: from 824MHz to 894MHzPCS 1900: from 1850MHz to 1990MHz

3G UMTS Antennas: 2.100MHz plus 2G quad bandfrequency antennas. High Gain.

4G/LTE Antennas: Antennas for 4G /LTE solutions. 7002,600MHz. MIMO antennas with double antenna anddiversity.

Stub straight and right angledScrewedMagneticAdhesiveYagi

Connectors

SMA, SMB, QMAFMEMCX, MMCXFAKRAU.FL, H.FLBNC, T, N…

POWER SUPPLIES

Plug in power suppliesEurope and Universal with interchangeable plugs fordifferent countries.Europe 230VACUniversal 100 240VACPlugs for Europe, USA/Japan, UK, Argentina, India,Australia, Brasil, China, …

DIN rail power supplies:DN 20 12 12VDC with 1,7A size 23 x 90 x 99mmDN 60 12 12VDC with 5A size 40 x 90 x 99mmDN 100 12 12VDC with 7,5A size 55 x 90 x 99mmAdjustable Output voltage .DC OK relay output.

Li Po BatteriesVery Low Profile – Batteries are similar to a credit cardprofile.Flexible – BatteriesLightweight – gelled electrolytes enable you to removethe metal cover.Improved safety – more resistant to overloading, lesschance of electrolytes leaking.NTC – Controls battery temperature.

External Battery Pack for MTXM2M terminals with 12VDCinput to recharge

CABLES

Power cable for MTX with RJ12 connector and Fuse for DCmodems.

Data cables

USB to Mini USBPort Expansion: DB15HD Male to 9 wiresPort Expansion: DB15HD Male to wires and DB9FemaleSerial Cable: RJ12 to DB9 MaleSerial Cable: DB9 Male to DB9 FemaleAdapter: DB15HD Male to DB9 Female

DIN Rail mounting accesory.

SensorsTemperature & Humidity sensors

RS 232CModbus RS485 con IP67 o IP20Temperature + Humidity with Modbus RS485Resolution: 0,1ºC

Ultrasound sensors

Sensors with IP20 or IP67Resolution: 1cm or 1mmUp to 10m detecting distance

http://mtxm2m.com/en/downloads/

[email protected]

Quality Te

chni

cal

Supp

ort

OWN R+D Know How

Flexibility + Integration

Free seminars. JAVA Trainning Practical Demostrations TERMINAL TOOL BLOG & WIKI FTP: Docs, examples, tools, videos… Email support

HW and SW Integration Expertise

JAVA CODE GPS parser. GNSS Bluetooth LINUX CORE, DRIVERS Networking RF Short range Apps

Plenty of interfaces Many options Technology integration Flexible custom design Ready for tomorrow (LoRA, etc)

GPS+GLONASS Bluetooth Wifi Battery CAN Wmbus VGA RFID MESH AUDIO

The MTX M2M family of wireless modems has been designed and manufactured to comply withthe highest standards and approvals at both a national and international level. These include:

Internal quality regulationsThe MTX terminals are manufactured to comply with the ISO9001

CE markingDirective 1999/5/CE; this aims to guaranteeRTTE compliance with the essentialrequirements of security and electromagneticcompatibility.

RoHS CompliantRoHS (Restriction of Hazardous Substances) refers to the directive 2002/95/CEregarding electric and electronic equipment, adopted by the European Union inFebruary 2003.

WEEE

The directive 2002/96/CE of the European Parliament and EuropeanCouncil from 27th January 2003 regarding electric and electronic wasteproducts, intends to encourage the recycling, reuse and recuperation ofthese waste products in order to reduce contamination.

PTCRB

PTCRB is a global organization created by mobile telephoneoperators whose objective is to offer an evaluation processthat is independent of the device manufacturers in providing

the GSM/UMTS certifications. It gives authority to primary and third party laboratories to applytheir own GSM trial systems.

FCC

The Federal Communications Commission (FCC) is a federal agency ofthe United States of America responsible for the regulation oftelecommunications and the elaboration of electromagneticcompatibility regulations

Sales contact

www.mtxm2m.com

[email protected]

Matrix Madrid Matrix Barcelona Matrix Bilbao Matrix ValenciaMatrix Electrónica S.L.

C/ Alejandro Sánchez, 10928019 Madrid (SPAIN)

Matrix Electrónica S.L.

Ctra. Rubí a Sabadell Km 13Nave 109, Oficinas 6 908191 Rubí, Barcelona(SPAIN)


Pol. Aliendalde, 11Oficina 2G48200 Durango, Vizcaya(SPAIN)


Valencia (SPAIN)

Phone 1:Phone 2:Fax 1:Fax 2:

902 19 81 46+34915602737

902 99 54 14+34915652865

Phone 1:Fax 1:

902 19 81 46902 99 54 14

Phone 1:Fax 1:

902 19 81 46902 99 54 14

Phone 1:Fax 1:

902 19 81 46902 99 54 14

Matrix Sevilla Matrix Lisboa Matrix Santiago de ChileMatrix Electrónica S.L.

Sevilla (SPAIN)

Phone: 902 19 81 46Fax: 902 99 54 14

LusoMatrix Lda.

Av. Coronel EduardoGalhardo, 7 1ºC1170 105 Lisboa(PORTUGAL)


Calle Badajoz, 100Oficina 1305Santiago de Chile (CHILE)

Phone 1:Fax 1:

902 19 81 46902 99 54 14

Phone 1:Fax 1:

+351218162625+351218149482

Phone 1:Phone 2:

+56(9)53369943+56(9)74822647

ADVANCED M2M-IoT INNOVATIVE PRODUCTS

WWW.MTXM2M.COM

Support contact

mtx m2m catalog 2015 iot, internet of things

Technology

opt x1 x1 x1

x1 x4 x2

adapter opt opt opt

adapter opt opt optmtx

adapter opt optmtx

java stock

adapter ymtx

gps stock