mtp-lc angled breakout panels · 2019. 6. 21. · layout and dimensions dimensions are in inches....
TRANSCRIPT
• Mount to standard EIA 19" rack rails.
• Pre-terminated LC adapters on the front and
MTP adapters on the back enable quick dep-
loyments.
• Robust fixed port design enables high relia-
bility.
• Available with either single mode or multimo-
de connectors to accommodate the specific
requirements of your network infrastructure.
• Adapter housing colors follow TIA/EIA-568-
C.3 suggestion, easy identification of fiber
type via adapter colors.
MTP-LC Angled Breakout Panels
FS MTP-LC Angled Breakout Panels are pre-terminated and
designed to mount into 19" wide telecommunications racks
allowing 96 fibers connections to be deployed in one rack unit
(1U) without additional support infrastructure. This ensures
efficient use of space, quick deployment, and the highest
reliability for the lowest installed cost, they enable faster
installation to vertical cable managers and eliminate the need
for horizontal cable management.
1www.fs.com
High-density Pre-terminated Modular System
MTP-LC Angled Breakout Panels
Description Features
Application
2www.fs.com
FS MTP-LC Angled Breakout Panels are used in high-density network applications as specified in the Data Center Cabling Standard
TIA 942 for cross connect in main distribution, horizontal distribution, and equipment distribution areas.
Product Specifications
I. Product Constructions
Fiber Count 96 Fibers
Fiber Mode Single Mode: OS2 9/125μmMultimode: OM4 50/125μm
Front Connectivity Single Mode: LC Duplex adapters with UPC polishMultimode: LC Duplex adapters with UPC polish
Rear Connectivity Single Mode: MTP adapters with male ferrules (pins) and APC polishMultimode: MTP adapters with male ferrules (pins) and UPC polish
Material Aluminum
Dimensions (HxWxD) 1.73''x19''x4.72'' (44x482.6x120mm)
II. Performance Properties
Front Connector LC Quad
Number of Front Adapters 48
Insertion Loss Single Mode: Per Channel ≤0.2dBMultimode: Per Channel ≤0.2dB
Return Loss Single Mode: Per Channel ≥50dBMultimode: Per Channel ≥30dB
Material of sleeve Zirconia Ceramic
MTP-LC Angled Breakout Panels
3www.fs.com
Standards Compliance
• ISO9001 Certificate
• RoHS Compliant
III. Performance Properties
Rear Connector MTP-12 (Key up-Key down)
Number of Rear Adapters 8
Insertion Loss Single Mode: Ultra low IL 0.35dB max.Multimode: Ultra low IL 0.35dB max.
Return Loss Single Mode: Per channel ≥60dBMultimode: Per channel ≥20dB
Connector Durability US Conec MTP® brand adapters meets TIA/EIA 568.C.3A.4.9Durability: 500 mating cycles
Note:
The 8 Groups are of the same connection sequence.
Polarity Illustration
The internal Base-12 wiring of MTP-LC breakout panel ensures the correct fiber polarity throughout the entire system.
*The connection of 1 Group is shown.
MTP-LC Angled Breakout Panels
Key down-Key up
4www.fs.com
Layout and Dimensions
Dimensions are in inches. (Dimensions in parentheses are in millimeters).
Top View
Front View
Rear View
MTP-LC Angled Breakout Panels
ID Description
#70771 45U 4-Post Adjustable Open Frame Rack
#73579 42U Black Network & Server Cabinet 800*1170mm with 2 Pre-Installed Cable Managers and PDU Brackets
#68018 1m (3ft) MTP Female to Female 12 Fibers OS2 9/125 Single Mode Trunk Cable, Type B, Elite
#68017 1m (3ft) MTP Female to Female 12 Fibers OM4 Multimode Trunk Cable, Type B, Elite
#68294 1m (3ft) LC UPC to LC UPC Duplex PVC (OFNR) OS2 Single Mode BIF Fiber Patch Cable, Typical 0.12dB IL
#68299 1m (3ft) LC UPC to LC UPC Duplex OM4 Multimode Elite BIF Fiber Patch Cable, 0.15dB IL, PVC (OFNR)
#61880 25m/Roll 1000in.L x 0.48in.W Back to Back Reusable Cable Ties-Blue
5www.fs.com
Hot Products
ID Description
#56939 8x MTP-12 to 48x LC Duplex, 96 Fibers OS2 Single Mode FHU 1U Breakout Patch Panel Angled, Type A
#56945 8x MTP-12 to 48x LC Duplex, 96 Fibers OM4 Multimode FHU 1U Breakout Patch Panel Angled, Type A
Matching Products
MTP-LC Angled Breakout Panels