mtk acrylic urethane - english colorenglishcolor.com/ecs_-_ecucitc/lic_cpc_files/mtk t… · ·...

©2000 PPG Industries Part # OB9 (6/00) MTK MTK Acrylic Urethane Background MTK is a fast drying, two component, acrylic urethane designed for today’s automotive collision centers. MTK Acrylic Urethane Color MTK Acrylic Urethane Reducer MR185 Fast, MR186 Medium, MR187 Slow, MR188 Very Slow Hardener MH167 Fast, MH168 Slow, MH169 Very Slow Compatible Substrates Cured, cleaned and sanded OEM and refinish enamels MP170 Epoxy Primer *MP176 Etch Primer - *Should be primed before topcoating MP178 Plastic Primer MP180 2K Sealer MP181 1K Primer Surfacer MP182 2K Urethane Surfacer MP183 Compliant Sealer MP184 Compliant Surfacer MX198 Polyester Primer MP210 1K High Solids Primer MP211 2K High Solids Primer MP213 GP Sealer MP281 1K Light Gray Primer Surfacer Preparation Surface cleaning MX190 Cleaner, MX191 Low VOC Cleaner, MX192 Plastic Cleaner Sanding 400 grit (machine or dry hand) or 500 grit (wet) on old finishes and primer Surfacers Mixing Ratios Standard MTK MR Reducer MH167 / MH168 / MH169 4 : 1 : 1 Higher Solids MTK MR Reduce r MH167 / MH168 / MH169 4 : ½ : 1 Pot life 8 hours at 70ºF (21ºC) Tinting MTK may be tinted up to 10% with OMNI ™ AU mixing bases Color plus clear 1 part of RTS color can be mixed with up to 1 part RTS MC160, MC161, or MC260 clear on last coat. Mixing (cont.) Additives MR189 Retarder Add 10% to RTS quart MX193 Flex Add Add 10% to RTS quart MX194 Fisheye Elim. Add ½ oz. to RTS quart MX195 Accelerator Add 1 oz. to RTS quart MX200 Accelerator Add ½ oz. to RTS quart Application Coats 2 coats or until hiding Air pressure HVLP 8 - 10 psi at the air cap Conventional 40 - 50 psi at the gun Gun setup 1.4 - 1.6 mm or equivalent Dry Times Between coats 5 - 10 minutes at 70ºF (21ºC) Air dry Dust: 45 min Tack: 3 to 5 hours Tape: 12 hours Dry: 16 hours at 70ºF (21ºC) to polish and put into service Clear: 4-6 hours Force dry 30 minutes at 140ºF (60ºC), wait 8 hours to polish and put into service IR 10 - 15 minutes Clean Up Clean spray guns, gun cups, storage pots, etc., thoroughly with MR Reducer, MS100 General Purpose Solvent or other appropriate clean up solvent after each use. Follow EPA guidelines for proper storage and disposal of solvent-borne waste paint. Properties VOC Package 4.5 lb./gal. Applied (4:1:1) 5.0 lb./gal. max. Applied (4:½:1) 5.0 lb./gal. max. Film build per coat Applied (4:1:1) 0.8 - 1.2 mils Applied (4:½:1) 1.0 - 1.4 mils Square foot coverage at 1 mil Applied (4:1:1) 478 - 562 sq. ft. / gal., no loss Applied (4:½:1) 532 - 624 sq. ft. / gal., no loss Limitations Omni™ AU and Omni™ LV should not be combined with components of other product lines. Important The contents of this package may have to be blended with other components before the product can be used. Before opening the packages, be sure you understand the warning messages on the labels of all components, since the mixture will have the hazards of all its parts. Spray equipment must be handled with due care and in accordance with manufacturer’s recommendations. Follow label directions for respirator use. Wear eye and skin protection. Observe all applicable precautions. See Material Safety Data Sheet and Labels for additional safety information and handling instructions. EMERGENCY MEDICAL OR SPILL CONTROL INFORMATION (304) 843-1300; IN CANADA (514) 645-1320.

Upload: voliem

Post on 03-May-2018

225 views

Category:

Documents

2 download

Report

Download

Embed Size (px):

TRANSCRIPT

MTK Acrylic Urethane.

BackgroundMTK is a fast drying, two component, acrylic urethane

designed for today’s automotive collision centers..

MTK Acrylic UrethaneColor

MTK Acrylic UrethaneReducer

MR185 Fast, MR186 Medium, MR187 Slow, MR188 VerySlow

HardenerMH167 Fast, MH168 Slow, MH169 Very Slow

Compatible SubstratesCured, cleaned and sanded OEM and refinish enamelsMP170 Epoxy Primer

*MP176 Etch Primer - *Should be primed before topcoatingMP178 Plastic PrimerMP180 2K SealerMP181 1K Primer SurfacerMP182 2K Urethane SurfacerMP183 Compliant SealerMP184 Compliant SurfacerMX198 Polyester PrimerMP210 1K High Solids PrimerMP211 2K High Solids PrimerMP213 GP SealerMP281 1K Light Gray Primer Surfacer

PreparationSurface cleaning

MX190 Cleaner, MX191 Low VOC Cleaner, MX192 PlasticCleaner

Sanding400 grit (machine or dry hand) or 500 grit (wet) on oldfinishes and primer Surfacers

MixingRatios

Standard

MTK MR Reducer MH167 / MH168 / MH169 4 : 1 : 1

Higher Solids

MTK MR Reducer MH167 / MH168 / MH169 4 : ½ : 1

Pot life 8 hours at 70ºF (21ºC)Tinting

MTK may be tinted up to 10% with OMNI™ AU mixing basesColor plus clear

1 part of RTS color can be mixed with up to 1 part RTSMC160, MC161, or MC260 clear on last coat.

Mixing (cont.)Additives MR189 Retarder Add 10% to RTS quart

MX193 Flex Add Add 10% to RTS quartMX194 Fisheye Elim. Add ½ oz. to RTS quartMX195 Accelerator Add 1 oz. to RTS quartMX200 Accelerator Add ½ oz. to RTS quart

ApplicationCoats

2 coats or until hidingAir pressure

HVLP 8 - 10 psi at the air capConventional 40 - 50 psi at the gun

Gun setup1.4 - 1.6 mm or equivalent

Dry TimesBetween coats

5 - 10 minutes at 70ºF (21ºC)Air dry

Dust: 45 min Tack: 3 to 5 hours Tape: 12 hours Dry: 16 hours at 70ºF (21ºC) to polish and put into service Clear: 4-6 hoursForce dry

30 minutes at 140ºF (60ºC), wait 8 hours to polish and put into service

IR10 - 15 minutes

Clean UpClean spray guns, gun cups, storage pots, etc., thoroughly with

MR Reducer, MS100 General Purpose Solvent or otherappropriate clean up solvent after each use.

Follow EPA guidelines for proper storage and disposal ofsolvent-borne waste paint.

PropertiesVOC

Package 4.5 lb./gal.Applied (4:1:1) 5.0 lb./gal. max.Applied (4:½:1) 5.0 lb./gal. max.

Film build per coatApplied (4:1:1) 0.8 - 1.2 milsApplied (4:½:1) 1.0 - 1.4 mils

Square foot coverage at 1 milApplied (4:1:1) 478 - 562 sq. ft. / gal., no lossApplied (4:½:1) 532 - 624 sq. ft. / gal., no loss

LimitationsOmni™ AU and Omni™ LV should not be combined with components of other product lines...

ImportantThe contents of this package may have to be blended with other components before the product can be used. Before opening the

packages, be sure you understand the warning messages on the labels of all components, since the mixture will have the hazards of allits parts. Spray equipment must be handled with due care and in accordance with manufacturer’s recommendations. Follow labeldirections for respirator use. Wear eye and skin protection. Observe all applicable precautions.

See Material Safety Data Sheet and Labels for additional safety information and handling instructions.EMERGENCY MEDICAL OR SPILL CONTROL INFORMATION (304) 843-1300; IN CANADA (514) 645-1320.

Mtk Atcmd Set

Silabus mtk xii

Industry · PDF fileIndustry magazine brings you the eighth ... laminated panels, ... water-based urethane, EVA, EB-cured, 2K urethane, acrylic,

4. silabus mtk smk

Final MTK Presentation

Application of Infrared Spectroscopy and Pyrolysis-Gas ... · Pyrolysis chromatography (Py-GC) ... Exemplary IR spectra of acrylic-urethane paints modified with styrene (No. 33 and

tugas MTK semester 1

Tutorial MTK

MOISTURE CONTROL SYSTEMS SET.SNIP.SPREAD. · WOOD FLOORING ADHESIVES 675 720 RESILIENT FLOORING ADHESIVES 670 Urethane Urethane Urethane Advanced Polymer Acrylic LVT, Rubber LVT/Plank,

MTK NMEA Packet Customer Version - · PDF fileMTK Confidential B (密) MTK NMEA Packet PRELIMINARY, SUBJECT TO CHANGE WITHOUT NOTICE MTK CONFIDENTIAL, NO DISCLOSURE MTK NMEA Packet

Silabus. MTK

MTK Manual pg1