mse 160 polymer synthesis and characterization
TRANSCRIPT
![Page 1: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/1.jpg)
1/14/2020EngrMSE 160, 2020 Winter
MSE 160 – Polymer synthesis and characterization
MSE 160 Laboratory Safety Rules form posted on class page (bowmanlab.eng.uci.edu/class)
Lab Manager Steve Weinstock will give a safety
introduction during your first lab session
1
2
![Page 2: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/2.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Labs this week
bowmanlab.eng.uci.edu/class
Labs this week
bowmanlab.eng.uci.edu/class
3
4
![Page 3: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/3.jpg)
1/14/2020EngrMSE 160, 2020 Winter
From last lecture…
Quizzes will happen on your first lab session of
each module; they are 5 questions, will take 10
mins.
I added a document on Error Analysis to the
Class page. Measurements are uncertain, and
errors arise from propagating these
uncertainties through calculations.
Everyone has 2.5 weeks to write the lab report,
appendix is not required.
Outline
• Synthesis
• Thermoplastics and thermosets
• Epoxy cross-linking
• Polymer structure
• Polymerization mechanisms
• Characterization
Lecture outline
5
6
![Page 4: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/4.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Organic-based materials are generally
associated with “soft” characteristics
relatively low-melting and facile plastic
deformation
numerous polymer classes exhibit hardness and
thermal stabilities that rival inorganic ceramics
No other material is as heavily utilized in our society as organic-based polymers
Organic-based materials are generally
associated with “soft” characteristics
relatively low-melting and facile plastic
deformation
numerous polymer classes exhibit hardness and
thermal stabilities that rival inorganic ceramics
No other material is as heavily utilized in our society as organic-based polymers
7
8
![Page 5: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/5.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Polymers are made of multiple monomers
Polymers are made of multiple monomers
9
10
![Page 6: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/6.jpg)
1/14/2020EngrMSE 160, 2020 Winter
The most fundamental classification of polymers is whether they are synthetic or naturally-occurring
Let’s name some naturally-occurring polymers
The most fundamental classification of polymers is whether they are synthetic or naturally-occurring
Let’s name some naturally-occurring polymers
11
12
![Page 7: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/7.jpg)
1/14/2020EngrMSE 160, 2020 Winter
The most fundamental classification of polymers is whether they are synthetic or naturally-occurring
Thermoplastics and thermosets
13
14
![Page 8: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/8.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Synthetic polymers may be classified under two general umbrellas:thermoplastics and thermosets
Thermoplastics comprise long molecules with
side chains or groups that are not connected to
neighboring molecules (i.e., not crosslinked).
Thermosets are initially liquids and become
hardened by a thermally induced crosslinking
process known as curing.
What do the names suggest about their higher T behavior?
Synthetic polymers may be classified under two general umbrellas:thermoplastics and thermosets
Thermoplastics comprise long molecules with
side chains or groups that are not connected to
neighboring molecules (i.e., not crosslinked).
Thermosets are initially liquids and become
hardened by a thermally induced crosslinking
process known as curing.
What do the names suggest about their higher T behavior?
15
16
![Page 9: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/9.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Synthetic polymers may be classified under two general umbrellas:thermoplastics and thermosets
Thermoplastics comprise long molecules with
side chains or groups that are not connected to
neighboring molecules (i.e., not crosslinked).
Thermosets are initially liquids and become
hardened by a thermally induced crosslinking
process known as curing.
What do the names suggest about their higher T behavior?
Thermoplastics comprise long molecules with side chains or groups that are not connected to neighboring molecules (i.e., not crosslinked).
They transform to a rubbery elastomer or
flexible plastic at an elevated temperature.
17
18
![Page 10: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/10.jpg)
1/14/2020EngrMSE 160, 2020 Winter
The glass-transition temperature (Tg) is the most important property of polymers
Tg and volume depend on the cooling rate,
conformations will vary
Glass transition is “kinetically limited”, so volume
will spontaneously decrease with time
Polymers can also crystallize during cooling
Discontinuous volume change at crystallization
temperature, Tf
19
20
![Page 11: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/11.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Polymers can also crystallize during cooling
System is in equilibrium at Tm
Polymers can also crystallize during cooling
System is in equilibrium at Tm
21
22
![Page 12: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/12.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Polymers can also crystallize during cooling
System is in equilibrium at Tm
Polymers can also crystallize during cooling
High cooling rate can yield a glass
Seed nucleation is favored by low temperature
Nuclei growth is favored by high temperature
23
24
![Page 13: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/13.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Thermosets are initially liquids and become hardened by a thermally induced crosslinking process known as curing.
Unlike thermoplastics, thermosets may not be
re-melted/re-processed.
The crosslinking process yields a stable 3D
network
Usually synthesized in a mold to yield a desired
shape/part
Once the polymer cures, the only way to
reshape it is through machining processes
Most common type of thermosetting polymer is
epoxy resin (adhesives and paints/coatings)
Thermosets are initially liquids and become hardened by a thermally induced crosslinking process known as curing.
Unlike thermoplastics, thermosets may not be
re-melted/re-processed.
The crosslinking process yields a stable 3D
network
Usually synthesized in a mold to yield a desired
shape/part
Once the polymer cures, the only way to
reshape it is through machining processes
Most common type of thermosetting polymer is
epoxy resin (adhesives and paints/coatings)
25
26
![Page 14: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/14.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Thermosets are initially liquids and become hardened by a thermally induced crosslinking process known as curing.
Unlike thermoplastics, thermosets may not be
re-melted/re-processed.
The crosslinking process yields a stable 3D
network
Usually synthesized in a mold to yield a desired
shape/part
Once the polymer cures, the only way to
reshape it is through machining processes
Most common type of thermosetting polymer is
epoxy resin (adhesives and paints/coatings)
Thermosets are initially liquids and become hardened by a thermally induced crosslinking process known as curing.
Unlike thermoplastics, thermosets may not be
re-melted/re-processed.
The crosslinking process yields a stable 3D
network
Usually synthesized in a mold to yield a desired
shape/part
Once the polymer cures, the only way to
reshape it is through machining processes
Most common type of thermosetting polymer is
epoxy resin (adhesives and paints/coatings)
27
28
![Page 15: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/15.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Epoxy cross-linking
Epoxy cross-linking
29
30
![Page 16: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/16.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Epoxy resin harden through crosslinking reactionswith a curing agent called polyamine
Primary and secondary polyamines
contain reactive —NH2 groups
Epoxy resin harden through crosslinking reactionswith a curing agent called polyamine
Primary and secondary polyamines
contain reactive —NH2 groups
Epoxy resin monomer
31
32
![Page 17: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/17.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Epoxy resin harden through crosslinking reactionswith a curing agent called polyamine
Primary and secondary polyamines
contain reactive —NH2 groups
Reaction with primary amine
Epoxy resin harden through crosslinking reactionswith a curing agent called polyamine
Primary and secondary polyamines
contain reactive —NH2 groups
Forms reactive secondary amine
33
34
![Page 18: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/18.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Epoxy resin harden through crosslinking reactionswith a curing agent called polyamine
Primary and secondary polyamines
contain reactive —NH2 groups
Reactive ternary amine formed
Epoxy resin harden through crosslinking reactionswith a curing agent called polyamine
Primary and secondary polyamines
contain reactive —NH2 groups
Crosslinking reaction at –OH
35
36
![Page 19: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/19.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Epoxy resin harden through crosslinking reactionswith a curing agent called polyamine
Primary and secondary polyamines
contain reactive —NH2 groups
Polymer structure
37
38
![Page 20: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/20.jpg)
1/14/2020EngrMSE 160, 2020 Winter
There are five classes of macromolecular architectures
There are five classes of macromolecular architectures
Linear chains are best able to pack into a
regular crystalline array
As the degree of chain branching increases,
only amorphous phases are formed
Crystalline regions generally form where the
polymer chains are regularly organized,
while others remain disordered
39
40
![Page 21: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/21.jpg)
1/14/2020EngrMSE 160, 2020 Winter
There are five classes of macromolecular architectures
Linear chains are best able to pack into a
regular crystalline array
As the degree of chain branching increases,
only amorphous phases are formed
Crystalline regions generally form where the
polymer chains are regularly organized,
while others remain disordered
There are five classes of macromolecular architectures
Linear chains are best able to pack into a
regular crystalline array
As the degree of chain branching increases,
only amorphous phases are formed
Crystalline regions generally form where the
polymer chains are regularly organized,
while others remain disordered
41
42
![Page 22: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/22.jpg)
1/14/2020EngrMSE 160, 2020 Winter
There are five classes of macromolecular architectures
Structure directly affects physical properties
of the polymer, e.g. tensile strength,
flexibility, and opaqueness
A “homopolymer” is synthesized from only
one type of monomer
A “copolymer” polymer is synthesized from >
1 type of monomer
There are five classes of macromolecular architectures
Structure directly affects physical properties
of the polymer, e.g. tensile strength,
flexibility, and opaqueness
A “homopolymer” is synthesized from only
one type of monomer
A “copolymer” polymer is synthesized from >
1 type of monomer
43
44
![Page 23: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/23.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Crystallinity forms where polymer chains are regularly organized
Crystallinity forms where polymer chains are regularly organized
45
46
![Page 24: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/24.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Crystallinity forms where polymer chains are regularly organized
There are four types of copolymers
Block copolymers contain long adjacent
sequences of A and B monomers
Alternating copolymers comprise sequence
(— A — B —)n
Random copolymer has random linkages,
e.g. — AAABBABBAABB —
Graft copolymers have monomer chain with
offshoots
Structure, length, and placement of
copolymer units affects properties, e.g.
crystallinity, density, strength, brittleness,
melting point, and electrical conductivity
47
48
![Page 25: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/25.jpg)
1/14/2020EngrMSE 160, 2020 Winter
There are four types of copolymers
Block copolymers contain long adjacent
sequences of A and B monomers
Alternating copolymers comprise sequence
(— A — B —)n
Random copolymer has random linkages,
e.g. — AAABBABBAABB —
Graft copolymers have monomer chain with
offshoots
Structure, length, and placement of
copolymer units affects properties, e.g.
crystallinity, density, strength, brittleness,
melting point, and electrical conductivity
There are four types of copolymers
Block copolymers contain long adjacent
sequences of A and B monomers
Alternating copolymers comprise sequence
(— A — B —)n
Random copolymer has random linkages,
e.g. — AAABBABBAABB —
Graft copolymers have monomer chain with
offshoots
Structure, length, and placement of
copolymer units affects properties, e.g.
crystallinity, density, strength, brittleness,
melting point, and electrical conductivity
49
50
![Page 26: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/26.jpg)
1/14/2020EngrMSE 160, 2020 Winter
There are four types of copolymers
Block copolymers contain long adjacent
sequences of A and B monomers
Alternating copolymers comprise sequence
(— A — B —)n
Random copolymer has random linkages,
e.g. — AAABBABBAABB —
Graft copolymers have monomer chain with
offshoots
Structure, length, and placement of
copolymer units affects properties, e.g.
crystallinity, density, strength, brittleness,
melting point, and electrical conductivity
Properties are strongly affected by intermolecular forces between individual polymer chains
The main polymer chain made of covalently
bonded neighboring carbons
Crosslinking via covalent bond formation is
responsible for vulcanization of rubber
Flexibility of nylon is due to relatively weaker
interchain hydrogen bonding interactions
Other types of inter- or intrachain interactions
are dipole-dipole ...
…and van der Waals forces (induced dipole)
51
52
![Page 27: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/27.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Properties are strongly affected by intermolecular forces between individual polymer chains
The main polymer chain made of covalently
bonded neighboring carbons
Crosslinking via covalent bond formation is
responsible for vulcanization of rubber
Flexibility of nylon is due to relatively weaker
interchain hydrogen bonding interactions
Other types of inter- or intrachain interactions
are dipole-dipole ...
…and van der Waals forces (induced dipole)
Properties are strongly affected by intermolecular forces between individual polymer chains
The main polymer chain made of covalently
bonded neighboring carbons
Crosslinking via covalent bond formation is
responsible for vulcanization of rubber
Flexibility of nylon is due to relatively weaker
interchain hydrogen bonding interactions
Other types of inter- or intrachain interactions
are dipole-dipole ...
…and van der Waals forces (induced dipole)
53
54
![Page 28: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/28.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Properties are strongly affected by intermolecular forces between individual polymer chains
The main polymer chain made of covalently
bonded neighboring carbons
Crosslinking via covalent bond formation is
responsible for vulcanization of rubber
Flexibility of nylon is due to relatively weaker
interchain hydrogen bonding interactions
Other types of inter- or intrachain interactions
are dipole-dipole ...
…and van der Waals forces (induced dipole)
Properties are strongly affected by intermolecular forces between individual polymer chains
The main polymer chain made of covalently
bonded neighboring carbons
Crosslinking via covalent bond formation is
responsible for vulcanization of rubber
Flexibility of nylon is due to relatively weaker
interchain hydrogen bonding interactions
Other types of inter- or intrachain interactions
are dipole-dipole ...
…and van der Waals forces (induced dipole)
55
56
![Page 29: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/29.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Polymerization mechanisms
Polymers may be synthesized by two general mechanisms
Step-growth (condensation) polymerization
relies on reactions of functionalized
monomers to build up polymer chains
Chain (addition) polymerization involves the
activation/addition of unsaturated
monomers
57
58
![Page 30: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/30.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Step-growth relies on reactions of functionalized monomersto build up polymer chains
Builds up polymer chains through dimers,
trimers, etc., to form oligomers and polymers
Proceeds through reaction of neighboring
complementary functional groups
Small molecular byproducts such as HX,
H2O, etc. are generated
E.g. acid/base-catalyzed synthesis of SiO2
networks by sol–gel
Step-growth relies on reactions of functionalized monomersto build up polymer chains
Builds up polymer chains through dimers,
trimers, etc., to form oligomers and polymers
Proceeds through reaction of neighboring
complementary functional groups
Small molecular byproducts such as HX,
H2O, etc. are generated
E.g. acid/base-catalyzed synthesis of SiO2
networks by sol–gel
59
60
![Page 31: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/31.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Step-growth relies on reactions of functionalized monomersto build up polymer chains
Builds up polymer chains through dimers,
trimers, etc., to form oligomers and polymers
Proceeds through reaction of neighboring
complementary functional groups
Small molecular byproducts such as HX,
H2O, etc. are generated
E.g. acid/base-catalyzed synthesis of SiO2
networks by sol–gel
Polydispersivity index (PDI) values of ~2 - 3
Step-growth relies on reactions of functionalized monomersto build up polymer chains
Builds up polymer chains through dimers,
trimers, etc., to form oligomers and polymers
Proceeds through reaction of neighboring
complementary functional groups
Small molecular byproducts such as HX,
H2O, etc. are generated
E.g. acid/base-catalyzed synthesis of SiO2
networks by sol–gel
Polydispersivity index (PDI) values of ~2 - 3
61
62
![Page 32: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/32.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Step-growth relies on reactions of functionalized monomersto build up polymer chains
Builds up polymer chains through dimers,
trimers, etc., to form oligomers and polymers
Proceeds through reaction of neighboring
complementary functional groups
Small molecular byproducts such as HX,
H2O, etc. are generated
E.g. acid/base-catalyzed synthesis of SiO2
networks by sol–gel
PDI values of ca. 2 - 3
Addition polymerization involves the activation/addition of unsaturated monomers
Yields a much higher MW polymer in a
relatively short period of time
Small molecular byproducts are not
generated
PDI values of ca. 10–20
63
64
![Page 33: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/33.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Addition polymerization involves the activation/addition of unsaturated monomers
Involves three steps: initiation, propagation,
and termination
During initiation, radicals or ionic species are
made from controlled decomposition of
initiator molecule.
Intermediates are added to the C ═ C bonds
of monomers to propagate growth
facile chain-transfer may occur, where the
radical end of the growing chain abstracts an
atom from another molecule/chain, stopping
primary chain growth.
Termination of polymer growth occurs
through either combination or
disproportionation (simultaneous redox)
Addition polymerization involves the activation/addition of unsaturated monomers
Involves three steps: initiation, propagation,
and termination
During initiation, radicals or ionic species are
made from controlled decomposition of
initiator molecule.
Intermediates are added to the C ═ C bonds
of monomers to propagate growth
facile chain-transfer may occur, where the
radical end of the growing chain abstracts an
atom from another molecule/chain, stopping
primary chain growth.
Termination of polymer growth occurs
through either combination or
disproportionation (simultaneous redox)
65
66
![Page 34: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/34.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Addition polymerization involves the activation/addition of unsaturated monomers
Involves three steps: initiation, propagation,
and termination
During initiation, radicals or ionic species are
made from controlled decomposition of
initiator molecule.
Intermediates are added to the C ═ C bonds
of monomers to propagate growth
facile chain-transfer may occur, where the
radical end of the growing chain abstracts an
atom from another molecule/chain, stopping
primary chain growth.
Termination of polymer growth occurs
through either combination or
disproportionation (simultaneous redox)
Addition polymerization involves the activation/addition of unsaturated monomers
Involves three steps: initiation, propagation,
and termination
During initiation, radicals or ionic species are
made from controlled decomposition of
initiator molecule.
Intermediates are added to the C ═ C bonds
of monomers to propagate growth
facile chain-transfer may occur, where the
radical end of the growing chain abstracts an
atom from another molecule/chain, stopping
primary chain growth.
Termination of polymer growth occurs
through either combination or
disproportionation (simultaneous redox)
67
68
![Page 35: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/35.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Addition polymerization involves the activation/addition of unsaturated monomers
Involves three steps: initiation, propagation,
and termination
During initiation, radicals or ionic species are
made from controlled decomposition of
initiator molecule.
Intermediates are added to the C ═ C bonds
of monomers to propagate growth
facile chain-transfer may occur, where the
radical end of the growing chain abstracts an
atom from another molecule/chain, stopping
primary chain growth.
Termination of polymer growth occurs
through either combination or
disproportionation (simultaneous redox)
Addition polymerization involves the activation/addition of unsaturated monomers
Involves three steps: initiation, propagation,
and termination
During initiation, radicals or ionic species are
made from controlled decomposition of
initiator molecule.
Intermediates are added to the C ═ C bonds
of monomers to propagate growth
facile chain-transfer may occur, where the
radical end of the growing chain abstracts an
atom from another molecule/chain, stopping
primary chain growth.
Termination of polymer growth occurs
through either combination or
disproportionation (simultaneous redox)
69
70
![Page 36: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/36.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Molecular weight (MW) of a polymer is MW of the monomer(s) multiplied by the degree of polymerization
Degree of polymerization (DoP)
where Mr = relative molar mass of the
polymer, and MR = relative molar mass of
the monomer
71
72
![Page 37: MSE 160 Polymer synthesis and characterization](https://reader031.vdocuments.us/reader031/viewer/2022012420/6175566153ca7331cf3ada65/html5/thumbnails/37.jpg)
1/14/2020EngrMSE 160, 2020 Winter
Polydispersity is the range of the molecular weight distribution
The polydispersity index (PDI)
where MW is the weight average molecular
weight, Mn is the number average molecular
weight
The PDI for synthetic polymers is always
>1.0; as chains approach a uniform length,
the PDI will approach unity
Biopolymers (e.g., polypeptides) have PDI
values ≈ or = 1, indicating that only one
length of polymer is present
Fahlman (2011) Polymeric Materials chapter in Materials Chemistry, Springer
References (see Class page)
73
74