msa 3-6 zq - scientific research...
TRANSCRIPT
Materials Sciences and Applications, 2012, 3, 333-431 Published Online June 2012 in SciRes (http://www.SciRP.org/journal/msa/)
TABLE OF CONTENTS
Volume 3 Number 6 June 2012 Evaluation of Corrosion Stability of Water Soluble Epoxy-Ester Primer through Electrochemical Studies
D. Ramesh, T. Vasudevan………………………………………………………………………………………………………..…333
Electrochemical Behavior and Corrosion Study of Electrodeposits of Zn and Zn-Fe-Co on Steel
C. A. M. Dutra, E. N. Codaro, R. Z. Nakazato…………………………………………………………………………………..…348
Effect of Antimony Additions on Corrosion and Mechanical Properties of Sn-Bi Eutectic Lead-Free Solder Alloy
A. Torres, L. Hernández, O. Domínguez………………………………………………………………………………………...…355
Use of Perovskite-Type Lanthanum Nickelate Synthesized by the Polymeric Precursor Method in the Steam Reforming Reaction of Methane
D. M. H. Martinelli, D. M. A. Melo, A. M. G. Pedrosa, A. E. Martinelli, M. A. de F. Melo,
M. K. S. Batista, R. C. Bitencourt………………………………………………………………………………………………..…363
Dielectric Relaxation in Complex Perovskite Oxide Sr(Gd0.5Nb0.5)O3
P. Kumar, A. K. Sharma, B. P. Singh, T. P. Sinha, N. K. Singh………………………………………………………………...…369
Capacitive Properties of Mesoporous Mn-Co Oxide Derived from a Mixed Oxalate
Y. Yan, B. C. Wu, C. H. Zheng, D. L. Fang……………………………………………………………………………………..…377
Interactions between Superplasticizer and Release Agents at the Concrete/Formwork Interface
S. Bouharoun, Y. Vanhove, C. Djelal, P. De Caro, I. Dubois……………………………………………………………………384
Characterization of Electrical Behavior of Ba5HoTi3V7O30 Ceramic Using Impedance Analysis
K. Kathayat, A. Panigrahi, A. Pandey, S. Kar…………………………………………………………………………………...…390
The Transformation of the Heterogeneous Materials under the Fatigue Deformation
S. Kh. Shamirzaev, J. K. Ziyovaddinov, Sh. B. Karimov………………………………………………………………………..…398
Production of Ca2AlNbO6 Ceramics and Study of Their Stability in Crude Petroleum for the Conservation of Metallic Sensing Elements Used in Petroleum Extraction
Y. P. Yadava, M. M. de Lima, J. C. S. Oliveira, R. A. S. Ferreira…………………………………………………………………408
Conical Structures on Acrylic Intraocular Lens (IOLs) Materials after 193-nm Excimer Laser Ablation
E. Spyratou, M. Makropoulou, D. Tsoutsi, G. Zoulinakis, C. Bacharis, I. Asproudis, A. Serafetinides………………………...…414
Tailoring Properties of Biocompatible PEG-DMA Hydrogels with UV Light
S. Bäckström, J. Benavente, R. W. Berg, K. Stibius, M. S. Larsen, H. Bohr, C. Hélix-Nielsen………………………………...…425
The figures on the front cover are from the article published in Materials Sciences and Applications, 2012, Vol. 3, No. 6, pp. 414-424 by Ellas Spyratou, et al.
Copyright © 2012 SciRes. MSA
Materials Sciences and Applications (MSA)
Journal Information
SUBSCRIPTIONS
The Materials Sciences and Applications (Online at Scientific Research Publishing, www.SciRP.org) is published monthly by
Scientific Research Publishing, Inc., USA.
Subscription rates: Print: $59 per issue.
To subscribe, please contact Journals Subscriptions Department, E-mail: [email protected]
SERVICES
Advertisements
Advertisement Sales Department, E-mail: [email protected]
Reprints (minimum quantity 100 copies)
Reprints Co-ordinator, Scientific Research Publishing, Inc., USA.
E-mail: [email protected]
COPYRIGHT
Copyright©2012 Scientific Research Publishing, Inc.
All Rights Reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by
any means, electronic, mechanical, photocopying, recording, scanning or otherwise, except as described below, without the
permission in writing of the Publisher.
Copying of articles is not permitted except for personal and internal use, to the extent permitted by national copyright law, or under
the terms of a license issued by the national Reproduction Rights Organization.
Requests for permission for other kinds of copying, such as copying for general distribution, for advertising or promotional purposes,
for creating new collective works or for resale, and other enquiries should be addressed to the Publisher.
Statements and opinions expressed in the articles and communications are those of the individual contributors and not the statements
and opinion of Scientific Research Publishing, Inc. We assumes no responsibility or liability for any damage or injury to persons or
property arising out of the use of any materials, instructions, methods or ideas contained herein. We expressly disclaim any implied
warranties of merchantability or fitness for a particular purpose. If expert assistance is required, the services of a competent
professional person should be sought.
PRODUCTION INFORMATION
For manuscripts that have been accepted for publication, please contact:
E-mail: [email protected]