MS-12

SEMI-AUTOMATIC SLICER

INSTRUCTION MANUALThis manual contains important information regarding your Supera® unit. Please read this manual thoroughly prior to equipment set-up, operation and mainte-nance. Failure to comply with regular maintenance guidelines outlined in this manual may void the warranty.

INST

RU

CT

ION

M

AN

UA

L

©SUPERA V.1.0 | October 2014

SAFETY NOTICE!Please read this manual before operating this machine. All safety guidelines must be followed.

It is important that all operators of this food processing machinery read the instructions and follow the instructions on usage and maintenance. It is the responsibility of the owner that all operators are trained and use this machine safely and correctly. This machine should not be used by any unauthorized or inexperienced personnel.

Regular sanitizing and cleaning is the responsibility of the operator, and is important to prevent illness. The operator must follow all guidelines and laws instated by your local and State health departments. Contaminated machines will spread bacteria and food-borne pathogens.

Read all instructions carefully before operating. When operating, stay alert and use common sense. Store this manual in a safe and accessible place.

SHARP KNIFE BLADEDo not touch knife when unit is on. Keep hands away from all moving parts.Do not operate without knife cover and knife sharpener properly installed.

©SUPERA V.1.0 | October 2014

INST

RU

CT

ION

M

AN

UA

L

KEY COMPONENTS

1.Active clapboard3. Button switch5. Towing bracket cover knob7. Sharpener

2. Food salver4. Knob with scale6. Blade guard disc8. Food fixed-arm

INSTALLATION

Install this slicer in a well-lit area on a level surface.

1. Unpack the slicer and remove all cardboard and packaging. 2. Install the rubber feet.3. Set it on a level surface in a well-lit area.4. Clean and sanitize the unit with a soft cloth.5. Air-dry all parts before use.6. More sure that your electricity and wall outlet is compatible with the units plug. Do not use an adaptor or an extension cord.

©SUPERA V.1.0 | October 2014

INST

RU

CT

ION

M

AN

UA

L

OPERATINGHold onto the handle to slice, not the food directly. Make sure the knife sharpener is in place.

1. Make sure all parts are working, and that knobs are tightened.2. Place food on the slicing board and hold in place with the end

weight. This unit is not intended to be used to slice bones or frozen products. Thaw food before slicing.

3. Turn the thickness adjusting handle to desired thickness.4. Press the start button to turn on the unit. The power light will turn on.5. Push the table back and forth. The slices will fall into the

receiving area. Do not push or catch slices with your hand.6. When slicing is complete, turn off the machine. The light will

turn off. Turn the thickness adjustor handle to close to the slicer table.

Never load food on the board when the machine is on.

SHARPENING1. The blade needs to be sharpened frequently. Before sharpening, the

blade should be wiped clean and unit turned off and unplugged.

2. Loosen the handle of the blade shelf, then raise up the shelf to the grinding wheel. Revolve it into place and then fix the handle to secure the knife.

3. Turn on the machine. Press the handle of the grinding wheel shelf to the back of the blade. Keep in place for 30-40 seconds.

4. Turn off the machine after moving the grinding wheel shelf to its original place.5. Rotate the thickness adjustor handle to close the table.

MAINTENANCE AND CLEANING

Always turn off and unplug the slicer before cleaning or sanitizing.

1. Clean and sanitize the knife and all surfaces with a food-safe sanitizer, making sure to follow all instructions listed on the product container.

2. For tough stains and food debris, a nylon brush may be used. After, use a clean wet cloth to wipe the area again.

3. Every 6 months, an inspection should be done to look out for damaged parts. This can affect the function of the slicer. Food debris can get stuck in the damaged parts therefore contaminate the unit.

4. Make sure that parts have proper lubrication. Use food-safe lubrication oils.

INST

RU

CT

ION

M

AN

UA

L

©SUPERA V.1.0 | October 2014

PROBLEM POSSIBLE CAUSE SOLUTION

TROUBLESHOOTING

Please go over the troubleshooting guide before contacting an authorized service technician. If any parts are broken or missing, contact your local representative right away.

The machine doesn't power on or works sluggishly

1.The plug is notconnected well2. The wire drops3. The voltage is notsteady

1.Confirm the connectionwith the electrical outlet2. Confirm to ensure everypart is connected well, or if the wire drops3. Keep the voltage steady

The slicing quality is poor

1.The food product hasnot been thawed thoroughly2. The blade is not sharpenough3. The mean supplyingdevice is not lubricated enough4. The meat-nippingdevice nips the meat too hard

1.Refer to the introductionof meat slicing2. Refer to the sharpeningguide.3. Fill in a small amount oflubricant in the blade pole.

The speed of the blade is slow

The belt wheel is looseTurn over the machine and then fine-tune the adjusting pole which is beside the motor

INST

RU

CT

ION

M

AN

UA

L

©SUPERA V.1.0 | October 2014

INST

RU

CT

ION

M

AN

UA

L

©SUPERA V.1.0 | October 2014

MS-12 MODEL SEMI-AUTOMATIC SLICER PARTS

Number Description Number Description

101 Enclose 125 Capacitor

102 Active clapboard 126 Capacitor retainer

103 Food salver 127 Screw of oriented staff

104 Guarding blade disc 300ES 128 Knob with scale

105 blade 300MM 129 Spring gasket

106 Blade guarding ring 300ES 130 Cam300

107 Tray bracket 131 Motherboard

108 Food fixed-arm 132 Cam osculant pin

109 food fixed arm block 133 Sliding axle

110 Handle 134 Slider

111 Plastic granule 135 Rubber foot

112 Motor 300ES 136 Sliding axle briquetting

113 Motor briquetting 137 Relay

114 Power line 138 Spring of sliding axle

115 Blade guard bolts 139 Towing bracket sliding axle

116 Ball bearing 6204 140 Quadrate axis

117 Belt wheel 141 Towing bracket

118 Pin of belt wheel 142 Button of towing bracket

119 Belt SV.400 143 Sharpener mulch

120 Supporting base 144 Button

121 Slide mulch 145 Fine grinding wheel

122 Meat scraper 146 Pin of burr cleaning wheel

123 Button mulch 147 Spring of burr cleaning wheel

124 Button switch 148 Crude grinding wheel

INST

RU

CT

ION

M

AN

UA

L

©SUPERA V.1.0 | October 2014

Number Description Number Description

149 Sharpener tighten knob 165 47 Spring gasket for hole

150 Supporting base of outer ring 166 Blade guard disc square-

head nut

151 167 Fixed-arm handle bolt

152 Pin of rubbing stone 168 Finger baffle bolt

153 Sharpener base of subassembly 169 Finger baffle nut

154 pin of blade guarding ring 170 Bracket knob bolt

155 Pin of food tray 171 Bracket knob nut

156 Meat blocking board A 172 Bracket bottom bolt

157 Meat blocking board A 173 Quadrate axis locking screw

158 Small belt wheel of motor 174 Slide axle briquetting bolt

159 Slide axle bracket 175 Meat scraping gasket

160 Towing bracket handle 176 Meat scraper bolt

161 Sliding axle 608 177 Supporting base gasket

162 Belt wheel module 178 Supporting base bolt

163 Sharpener module 179 Blade guarding ring shim

164 20 Spring gasket for bearing 180/ 181 Food fixed arm down holder/

Food fixed arm up holder

CERTIFICATIONS

4.751 Wheel

www.SuperaCo.com

© Supera 2014 Version 1 | November 2014

LIMITED WARRANTY SUPERA MEAT SLICER EQUIPMENT MODELS:

Meat Slicers: [MS-10, MS-12, MS-12V]

One-Year Parts & Labor Warranty: SUPERA, LLC warrants to the original purchaser of new equipment that said equipment, when

installed in accordance with our instructions within North America and subjected to normal use, is free from defects in material or workmanship for one year from the date of original purchase. Warranty includes onsite service calls within 60 miles of an authorized service company. End user is responsible for all extra travel and mileage at prevailing rates and for original call to SUPERA, LLC expressing need for warranty service. Any service provided without authorization from SUPERA, LLC will not be covered by SUPERA, LLC.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESSED OR IMPLIED. SUPERA, LLC EXPRESSLY

DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR EXPRESSED OR IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. SUPERA, LLC HAS FINAL DESCRETION ON ALL WARRANTY REQUESTS.

SUPERA, LLC’S OBLIGATION AND LIABILITY UNDER THIS WARRANTY IS EXPRESSLY LIMITED TO REPAIRING AND

REPLACING EQUIPMENT WHICH PROVES TO BE DEFECTIVE IN MATERIAL OR WORKMANSHIP WITHIN THE APPLICABLE WARRANTY PERIOD. All repairs pursuant to this Warranty will be performed by an Authorized Designated SUPERA, LLC Service

Location during normal working hours. This warranty does not cover services performed at overtime or premium labor rates. End user is responsible for the difference between normal service rates and premium service rates. This warranty does not cover any service technician errors. IN NO EVENT SHALL SUPERA, LLC BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES TO BUYER

OR ANY THIRD PARTY, INCLUDING, WITHOUT LIMITATION, LOSS OF PROPERTY, PERSONAL INJURY, LOSS OF BUSINESS OR PROFITS OR OTHER ECONOMIC LOSSES, OR STATUTORY OR EXEMPLARY DAMAGES, WHETHER IN NEGLIGENCE, WARRANTY, STRICT LIABILITY, OR OTHERWISE.

This warranty is given only to the first purchaser from a retail dealer. No warranty is given to subsequent transferees. Installation in a residential application will void all warranties.

Warranty does not cover product failures caused by: failure to maintain, neglect, abuse, damage due to excess water, fire, normal

wear, improper set up and use. Periodic maintenance including lubrication and sharpening is not covered. Warranty does not cover service requests for free replacement and/or recall parts.

THE FOREGOING WARRANTY PROVISIONS ARE A COMPLETE AND EXCLUSIVE STATEMENT BETWEEN THE BUYER AND SELLER. SUPERA, LLC NEITHER ASSUMES NOR AUTHORIZES ANY PERSONS TO ASSUME FOR IT ANY OTHER OBLIGATION

OR LIABILITY IN CONNECTION WITH SAID EQUIPMENT.

Example of items not covered under warranty, but not limited to only these items:

1. Acts of God, fire, water damage, burglary, accident, theft.2. Freight damage.3. Improper installation or alteration of equipment.4. Use of generic or after market parts.5. Repairs made by anyone other than a SUPERA, LLC designated servicer.

6. Lubrication.7. Expendable wear parts, adjustable feet, blown fuses, lamps, etc.8. Cleaning of equipment.9. Misuse or abuse.

Not Covered Under This Warranty: SUPERA, LLCʼs sole obligation under this warranty is limited to either repair or replacement of parts, subject to the additional limitations below. This warranty neither assumes nor authorizes any person to assume obligations other than those expressly covered by this warranty. Warranty does not cover service requests for free replacement and/or recall parts.

SUPERA, LLC HAS FINAL DESCRETION ON ALL WARRANTY REQUESTS. NO CONSEQUENTIAL DAMAGES. SUPERA, LLC IS NOT RESPONSIBLE FOR ECONOMIC LOSS; PROFIT LOSS; OR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOSSES, SERVICE TECHNICAN ERRORS, OR DAMAGES ARISING FROM FOOD OR PRODUCT SPOILAGE REGARDLESS OF WHETHER OR NOT THEY RESULT FROM REFRIGERATION FAILURE. WARRANTY IS NOT TRANSFERABLE, This warranty is not assignable and applies only in favor of the original purchaser/user to whom delivered. ANY SUCH ASSIGNMENT OR TRANSFER SHALL VOID THE WARRANNTIES HEREIN AND SHALL VOID ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR LABOR COVERAGE FOR COMPONENT FAILURE OR OTHER THE WARRANTY PACKET PROVIDED WITH THE UNIT. ALTERATION, NEGLECT, ABUSE, MISUSE, ACCIDENT, DAMAGE DURING TRANSIT OR INSTALLATION, FIRE, FOOD, ACTS OF GOD. SUPERA, LLC is not responsible for the repair or replacement of any parts that SUPERA, LLC determines have been subjected after the date of manufacture to alteration, neglect, abuse, misuse, accident, damage during transit or installation, fire, flood, or act of GOD. IMPROPER ELECTRICAL CONNECTIONS. SUPERA, LLC IS NOT RESPONSIBLE FOR THE REPAIR OR REPLACEMENT OF FAILED OR DAMAGED COMPONENTS RESULTING FROM ELECTRICAL POWER FAILURE, THE USE OF EXTENSION CORDS, LOW VOLTAGE, OR VOLTAGE DROPS TO THE UNIT. NO IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE; THERE ARE NO OTHER WARRANTIES, EXPRESSED, IMPLIED OR STATUTORY, EXCEPT THE ONE (1) YEAR PARTS & LABOR WARRANTY AS DESCRIBED ABOVE. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, INCLUDING IMPLIED WARRANTY AND MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THERE ARE NO WARRANTIES, WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. Outside U.S. and Canada; this warranty does not apply, and SUPERA, LLC is not responsible for, any warranty claims made on products sold or used outside the continent of the United States and Canada. Installation in a residential application will void all warranties.

Supera Customer Care Toll-Free Service Line:1-866-953-3288

For additional product and warranty information, please visit our website at:

www.SuperaCo.com