Upload File

mrt. adjustable handles inox technopolymer rohs pa. (inch sizes).pdf · mdels all hts eseved n...

  • Home
  • Documents
  • MRT. Adjustable handles INOX Technopolymer RoHS PA. (inch sizes).pdf · Mdels all hts eseved n adane th the law. Alas entn the sue hen epdun u dans and phts. 1 2 3 4 5 6 7 8 9 10
3
Models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings and photos. 343 Clamping levers MRT. Adjustable handles Technopolymer STAINLESS STEEL INOX RoHS PA +266 °F -22 °F LEVER BODY Glass-fibre reinforced polyamide based (PA) technopolymer, grey-black colour, matte finish. PUSH BUTTON Technopolymer in grey-black or orange colours, glossy finish. STANDARD EXECUTIONS Glass-fibre reinforced technopolymer clamping element with retaining pin, black colour, with knurling on the protruding part to make initial tightening easier. AISI 302 stainless steel return spring. - MRT-B: brass boss, threaded blind hole. - MRT-SST: AISI 303 stainless steel boss, threaded blind hole. - MRT-p: zinc-plated steel threaded stud, chamfered flat end ISO 4753 (see Technical Data on page A-10). - MRT-SST-p: AISI 303 stainless steel threaded stud, chamfered flat end ISO 4753 (see Technical Data on page A-10). FEATURES AND APPLICATIONS Flat adjustable handle, open configuration to avoid any deposit of unhygienic residues or scraps and dirt. Particularly suitable when the lever turning angle is limited owing to lack of space. Compared to other types of adjustable handles with metal retaining screw this solution offers: - absolute electric insulation for the operator - no visible steel parts subject to rust - more comfortable lever release. STRESS RESISTANCE See ERX. on page 324. INSTRUCTIONS OF USE For clamping, lift the lever to disengage the clamping device teeth and bring it back to start position. By releasing the lever, the return spring automatically engages the teeth. MRT-B MRT-SST .01 MRT-B Code Description R d2B L D H H1 h h1 h2 h3 d1 Teeth nr 940110-* MRT.42-B-10-24-* 1.69 10-24 2.01 0.63 1.1 1.24 0.39 1.14 0.24 0.85 0.47 18 0.02 940111-* MRT.42-B-10-32-* 1.69 10-32 2.01 0.63 1.1 1.24 0.39 1.14 0.24 0.85 0.47 18 0.02 940112-* MRT.42-B-1/4-20-* 1.69 1/4-20 2.01 0.63 1.1 1.24 0.39 1.14 0.24 0.85 0.47 18 0.02 940121-* MRT.65-B-1/4-20-* 2.54 1/4-20 2.93 0.79 1.46 1.61 0.47 1.5 0.35 1.06 0.59 20 0.05 940122-* MRT.65-B-5/16-18-* 2.54 5/16-18 2.93 0.79 1.46 1.61 0.51 1.5 0.35 1.06 0.59 20 0.05 940131-* MRT.80-B-5/16-18-* 3.13 5/16-18 3.62 0.98 1.77 1.93 0.71 1.85 0.43 1.36 0.73 24 0.11 940132-* MRT.80-B-3/8-16-* 3.13 3/8-16 3.62 0.98 1.77 1.93 0.67 1.85 0.43 1.36 0.73 24 0.1 940133-* MRT.80-B-1/2-13-* 3.13 1/2-13 3.62 0.98 1.77 1.93 0.67 1.85 0.43 1.36 0.73 24 0.1 MRT-SST Code Description R d2B L D H H1 h h1 h2 h3 d1 Teeth nr 940613-* MRT.42-SST-10-24-* 1.69 10-24 2.01 0.63 1.1 1.24 0.39 1.14 0.24 0.85 0.47 18 0.02 940616-* MRT.42-SST-1/4-20-* 1.69 1/4-20 2.01 0.63 1.1 1.24 0.39 1.14 0.24 0.85 0.47 18 0.02 940622-* MRT.65-SST-5/16-18-* 2.54 5/16-18 2.93 0.79 1.46 1.61 0.51 1.5 0.35 1.06 0.59 20 0.05 940626-* MRT.80-SST-3/8-16-* 3.13 3/8-16 3.62 0.98 1.77 1.93 0.67 1.85 0.43 1.36 0.73 24 0.09 INOX

Upload: others

Post on 15-Oct-2020

2 views

Category:

Documents


0 download

Report

TRANSCRIPT

Page 1: MRT. Adjustable handles INOX Technopolymer RoHS PA. (inch sizes).pdf · Mdels all hts eseved n adane th the law. Alas entn the sue hen epdun u dans and phts. 1 2 3 4 5 6 7 8 9 10

Models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings and photos.

343

Cla

mpi

ng le

vers

MRT. Adjustable handlesTechnopolymer STAINLESS

STEEL

INOX

RoHS PA +266 °F

-22 °F

LEVER BODYGlass-fibre reinforced polyamide based (PA) technopolymer, grey-black colour, matte finish.

PUSH BUTTONTechnopolymer in grey-black or orange colours, glossy finish.

STANDARD EXECUTIONSGlass-fibre reinforced technopolymer clamping element with retaining pin, black colour, with knurling on the protruding part to make initial tightening easier. AISI 302 stainless steel return spring. - MRT-B: brass boss, threaded blind hole. - MRT-SST: AISI 303 stainless steel boss, threaded blind hole. - MRT-p: zinc-plated steel threaded stud, chamfered flat end ISO 4753 (see Technical Data on page A-10).

- MRT-SST-p: AISI 303 stainless steel threaded stud, chamfered flat end ISO 4753 (see Technical Data on page A-10).

FEATURES AND APPLICATIONSFlat adjustable handle, open configuration to avoid any deposit of unhygienic residues or scraps and dirt.Particularly suitable when the lever turning angle is limited owing to lack of space.Compared to other types of adjustable handles with metal retaining screw this solution offers: - absolute electric insulation for the operator - no visible steel parts subject to rust - more comfortable lever release.

STRESS RESISTANCESee ERX. on page 324.

INSTRUCTIONS OF USEFor clamping, lift the lever to disengage the clamping device teeth and bring it back to start position. By releasing the lever, the return spring automatically engages the teeth.

MRT-BMRT-SST

.01

MRT-B

Code Description R d2B L D H H1 h h1 h2 h3 d1 Teeth nr

940110-* MRT.42-B-10-24-* 1.69 10-24 2.01 0.63 1.1 1.24 0.39 1.14 0.24 0.85 0.47 18 0.02

940111-* MRT.42-B-10-32-* 1.69 10-32 2.01 0.63 1.1 1.24 0.39 1.14 0.24 0.85 0.47 18 0.02

940112-* MRT.42-B-1/4-20-* 1.69 1/4-20 2.01 0.63 1.1 1.24 0.39 1.14 0.24 0.85 0.47 18 0.02

940121-* MRT.65-B-1/4-20-* 2.54 1/4-20 2.93 0.79 1.46 1.61 0.47 1.5 0.35 1.06 0.59 20 0.05

940122-* MRT.65-B-5/16-18-* 2.54 5/16-18 2.93 0.79 1.46 1.61 0.51 1.5 0.35 1.06 0.59 20 0.05

940131-* MRT.80-B-5/16-18-* 3.13 5/16-18 3.62 0.98 1.77 1.93 0.71 1.85 0.43 1.36 0.73 24 0.11

940132-* MRT.80-B-3/8-16-* 3.13 3/8-16 3.62 0.98 1.77 1.93 0.67 1.85 0.43 1.36 0.73 24 0.1

940133-* MRT.80-B-1/2-13-* 3.13 1/2-13 3.62 0.98 1.77 1.93 0.67 1.85 0.43 1.36 0.73 24 0.1

MRT-SST

Code Description R d2B L D H H1 h h1 h2 h3 d1 Teeth nr

940613-* MRT.42-SST-10-24-* 1.69 10-24 2.01 0.63 1.1 1.24 0.39 1.14 0.24 0.85 0.47 18 0.02

940616-* MRT.42-SST-1/4-20-* 1.69 1/4-20 2.01 0.63 1.1 1.24 0.39 1.14 0.24 0.85 0.47 18 0.02

940622-* MRT.65-SST-5/16-18-* 2.54 5/16-18 2.93 0.79 1.46 1.61 0.51 1.5 0.35 1.06 0.59 20 0.05

940626-* MRT.80-SST-3/8-16-* 3.13 3/8-16 3.62 0.98 1.77 1.93 0.67 1.85 0.43 1.36 0.73 24 0.09

INOX

Page 2: MRT. Adjustable handles INOX Technopolymer RoHS PA. (inch sizes).pdf · Mdels all hts eseved n adane th the law. Alas entn the sue hen epdun u dans and phts. 1 2 3 4 5 6 7 8 9 10

Models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings and photos.

344

Cla

mpi

ng le

vers

MRT. Adjustable handles

MRT-p

Code Description R d2A L D H H1 h1 h2 h3 d1 l Teeth nr

940291-* MRT.42-p-10-24x1/2-* 1.69 10-24 2.01 0.63 1.1 1.24 1.14 0.24 0.85 0.47 0.500 18 0.03

940293-* MRT.42-p-10-24x5/8-* 1.69 10-24 2.01 0.63 1.1 1.24 1.14 0.24 0.85 0.47 0.625 18 0.03

940295-* MRT.42-p-10-24x3/4-* 1.69 10-24 2.01 0.63 1.1 1.24 1.14 0.24 0.85 0.47 0.750 18 0.03

940297-* MRT.42-p-10-24x1-* 1.69 10-24 2.01 0.63 1.1 1.24 1.14 0.24 0.85 0.47 1.000 18 0.04

940301-* MRT.42-p-10-32x1/2-* 1.69 10-32 2.01 0.63 1.1 1.24 1.14 0.24 0.85 0.47 0.500 18 0.04

940303-* MRT.42-p-10-32x3/4-* 1.69 10-32 2.01 0.63 1.1 1.24 1.14 0.24 0.85 0.47 0.750 18 0.04

940311-* MRT.42-p-1/4-20x1/2-* 1.69 1/4-20 2.01 0.63 1.1 1.24 1.14 0.24 0.85 0.47 0.500 18 0.03

940312-* MRT.42-p-1/4-20x5/8-* 1.69 1/4-20 2.01 0.63 1.1 1.24 1.14 0.24 0.85 0.47 0.625 18 0.04

940313-* MRT.42-p-1/4-20x3/4-* 1.69 1/4-20 2.01 0.63 1.1 1.24 1.14 0.24 0.85 0.47 0.750 18 0.04

940314-* MRT.42-p-1/4-20x1-* 1.69 1/4-20 2.01 0.63 1.1 1.24 1.14 0.24 0.85 0.47 1.000 18 0.04

940317-* MRT.42-p-1/4-20x1½-* 1.69 1/4-20 2.01 0.63 1.1 1.24 1.14 0.24 0.85 0.47 1.500 18 0.05

940331-* MRT.65-p-1/4-20x1/2-* 2.54 1/4-20 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 0.500 20 0.06

940333-* MRT.65-p-1/4-20x5/8-* 2.54 1/4-20 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 0.625 20 0.06

940335-* MRT.65-p-1/4-20x3/4-* 2.54 1/4-20 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 0.750 20 0.07

940337-* MRT.65-p-1/4-20x1-* 2.54 1/4-20 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 1.000 20 0.07

940339-* MRT.65-p-1/4-20x1¼-* 2.54 1/4-20 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 1.250 20 0.07

940341-* MRT.65-p-1/4-20x1½-* 2.54 1/4-20 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 1.500 20 0.08

940349-* MRT.65-p-5/16-18x1/2-* 2.54 5/16-18 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 0.500 20 0.07

940351-* MRT.65-p-5/16-18x5/8-* 2.54 5/16-18 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 0.625 20 0.07

940352-* MRT.65-p-5/16-18x3/4-* 2.54 5/16-18 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 0.750 20 0.08

940353-* MRT.65-p-5/16-18x1-* 2.54 5/16-18 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 1.000 20 0.07

940354-* MRT.65-p-5/16-18x1¼-* 2.54 5/16-18 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 1.250 20 0.07

940356-* MRT.65-p-5/16-18x1½-* 2.54 5/16-18 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 1.500 20 0.08

940357-* MRT.65-p-5/16-18x2-* 2.54 5/16-18 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 2.000 20 0.08

940361-* MRT.65-p-3/8-16x3/4-* 2.54 3/8-16 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 0.750 20 0.09

940365-* MRT.65-p-3/8-16x1¼-* 2.54 3/8-16 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 1.250 20 0.09

940381-* MRT.80-p-3/8-16x1-* 3.13 3/8-16 3.62 0.98 1.77 1.93 1.85 0.43 1.36 0.73 1.000 24 0.1

940383-* MRT.80-p-3/8-16x1¼-* 3.13 3/8-16 3.62 0.98 1.77 1.93 1.85 0.43 1.36 0.73 1.250 24 0.1

940385-* MRT.80-p-3/8-16x1½-* 3.13 3/8-16 3.62 0.98 1.77 1.93 1.85 0.43 1.36 0.73 1.500 24 0.11

940386-* MRT.80-p-3/8-16x2-* 3.13 3/8-16 3.62 0.98 1.77 1.93 1.85 0.43 1.36 0.73 2.000 24 0.15

940387-* MRT.80-p-3/8-16x2½-* 3.13 3/8-16 3.62 0.98 1.77 1.93 1.85 0.43 1.36 0.73 2.500 24 0.19

940403-* MRT.80-p-1/2-13x1¼-* 3.13 1/2-13 3.62 0.98 1.77 1.93 1.85 0.43 1.36 0.73 1.250 24 0.17

940405-* MRT.80-p-1/2-13x1½-* 3.13 1/2-13 3.62 0.98 1.77 1.93 1.85 0.43 1.36 0.73 1.500 24 0.18

940407-* MRT.80-p-1/2-13x2-* 3.13 1/2-13 3.62 0.98 1.77 1.93 1.85 0.43 1.36 0.73 2.000 24 0.19

MRT-pMRT-SST-p

.01

2|3

Page 3: MRT. Adjustable handles INOX Technopolymer RoHS PA. (inch sizes).pdf · Mdels all hts eseved n adane th the law. Alas entn the sue hen epdun u dans and phts. 1 2 3 4 5 6 7 8 9 10

Models all rights reserved in accordance with the law. Always mention the source when reproducing our drawings and photos.

345

Cla

mpi

ng le

vers

MRT. Adjustable handles

MRT-SST-p

Code Description R d2A L D H H1 h1 h2 h3 d1 l Teeth nr

940663-* MRT.42-SST-p-10-24x5/8-* 1.69 10-24 2.01 0.63 1.1 1.24 1.14 0.24 0.85 0.47 0.625 18 0.02

940665-* MRT.42-SST-p-10-32x3/4-* 1.69 10-32 2.01 0.63 1.1 1.24 1.14 0.24 0.85 0.47 0.750 18 0.03

940670-* MRT.42-SST-p-1/4-20x1/2-* 1.69 1/4-20 2.01 0.63 1.1 1.24 1.14 0.24 0.85 0.47 0.500 18 0.03

940671-* MRT.42-SST-p-1/4-20x5/8-* 1.69 1/4-20 2.01 0.63 1.1 1.24 1.14 0.24 0.85 0.47 0.625 18 0.04

940672-* MRT.42-SST-p-1/4-20x3/4-* 1.69 1/4-20 2.01 0.63 1.1 1.24 1.14 0.24 0.85 0.47 0.750 18 0.04

940673-* MRT.42-SST-p-1/4-20x1-* 1.69 1/4-20 2.01 0.63 1.1 1.24 1.14 0.24 0.85 0.47 1.000 18 0.04

940681-* MRT.65-SST-p-1/4-20x1/2-* 2.54 1/4-20 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 0.500 20 0.06

940683-* MRT.65-SST-p-1/4-20x5/8-* 2.54 1/4-20 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 0.625 20 0.07

940685-* MRT.65-SST-p-1/4-20x3/4-* 2.54 1/4-20 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 0.750 20 0.07

940691-* MRT.65-SST-p-5/16-18x5/8-* 2.54 5/16-18 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 0.625 20 0.07

940692-* MRT.65-SST-p-5/16-18x3/4-* 2.54 5/16-18 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 0.750 20 0.08

940693-* MRT.65-SST-p-5/16-18x1-* 2.54 5/16-18 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 1.000 20 0.08

940694-* MRT.65-SST-p-5/16-18x1¼-* 2.54 5/16-18 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 1.250 20 0.09

940695-* MRT.65-SST-p-5/16-18x1½-* 2.54 5/16-18 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 1.500 20 0.09

940697-* MRT.65-SST-p-3/8-16x3/4-* 2.54 3/8-16 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 0.750 20 0.09

940699-* MRT.65-SST-p-3/8-16x1¼-* 2.54 3/8-16 2.93 0.79 1.46 1.61 1.5 0.35 1.06 0.59 1.250 20 0.09

940701-* MRT.80-SST-p-3/8-16x3/4-* 3.13 3/8-16 3.62 0.98 1.77 1.93 1.85 0.43 1.36 0.73 0.750 24 0.15

940702-* MRT.80-SST-p-3/8-16x1-* 3.13 3/8-16 3.62 0.98 1.77 1.93 1.85 0.43 1.36 0.73 1.000 24 0.15

940703-* MRT.80-SST-p-3/8-16x1¼-* 3.13 3/8-16 3.62 0.98 1.77 1.93 1.85 0.43 1.36 0.73 1.250 24 0.16

940704-* MRT.80-SST-p-3/8-16x1½-* 3.13 3/8-16 3.62 0.98 1.77 1.93 1.85 0.43 1.36 0.73 1.500 24 0.17

940705-* MRT.80-SST-p-3/8-16x2-* 3.13 3/8-16 3.62 0.98 1.77 1.93 1.85 0.43 1.36 0.73 2.000 24 0.18

940721-* MRT.80-SST-p-1/2-13x1¼-* 3.13 1/2-13 3.62 0.98 1.77 1.93 1.85 0.43 1.36 0.73 1.250 24 0.18

940723-* MRT.80-SST-p-1/2-13x1½-* 3.13 1/2-13 3.62 0.98 1.77 1.93 1.85 0.43 1.36 0.73 1.500 24 0.19

940725-* MRT.80-SST-p-1/2-13x2-* 3.13 1/2-13 3.62 0.98 1.77 1.93 1.85 0.43 1.36 0.73 2.000 24 0.19

MRT-pMRT-SST-p

.01

3|3

INOX


Rice Physiology - Southern Research · 130 The Ripe Plonl ‘I%C gum and gane order of the dcc plant hru vety much in common with other phts. ~pddly with other graoo spcdcs (Dsvos

Deploying Apache Hadoop with Dell and Mellanox VPI Solutions · 2019-12-12 · WHITE PAPER ©201 Mellanox Technologies All ights eseved Deploying Apache ™ Hadoop® with Dell and

CTRD /PHTS Coordinator Symposium April 9, 2008

FPK KELVIN ADJUSTABLE FLAT PANEL - Ecopower Inc · 2020. 3. 10. · REV-0310.20-115049 ©202 Ecopowe Inc. All ights eseved. ino@ eopoweinc.co led.eopoweinc.co 1.800.4.8086 A North

Albert Speer”and the Nazi Phts - isistatic.org · Albert Speer”and the Nazi War Phts EUGENE DAVIDSON ONE OF THE genuinely gifted men to be- come part of the Nazi war apparatus

Closing Retail Sales In-Store · PDF file3 Closing Retail Sales In-Store: Two Ways to Fight ack With Mobile ll igts eseved 01 st Sullivan IntroductIon Brick-and-mortar retailers are

CENTRAL PROVIDENT FUND SKILLS DEVELOPMENT LEVY 2017 · 2017-02-22 · SINGAPORE CENTRAL PROVIDENT FUND (CPF) RATES ... SKILLS DEVELOPMENT LEVY (SDL) RATES. pt 2017 te Ltd ts eseved

RENTING BASICS · 2020. 7. 2. · 6 entn ss A house. An apartment in a high-rise apartment building. A basement suite in a home that has a kitchen, bathroom, and living area. A condominium

Thyroid Nodules and Cancer in Children with PTEN …...Context: Phosphatase and tensin homolog (PTEN) hamartoma tumor syndrome (PHTS) is a complex disorder caused by germline-inactivating

A DESERT ROSE - BuroHappold Engineering · A DESERT ROSE . Copyright © 976-201 5 uroHappold gineeg ll ights eseved Images © Joe Poon the tents vital tensile strength against the

Cold Gold Field Adhesive - IKO Global · PDF fileCoeil All ihs eseved IKO.CM/CMM Cold Gold™ Field Adhesive COLD APPLIED ROOFING ADHESIVE Cold Gold™ Field Adhesive COLD APPLIED

Photosynthesis!. Plant questions? How do plants obtain energy? Why do plants need light? Why do plants need water? Why are plants green? cmallery/150/phts/phts.htm

2017.pdfagainst "Bharath University, Chennai" under the heading 'Recognised Medical Qualification' geranaftcr refcrred to as column (21 1, arter the last entry and entn relating thereto

Marine Ice Sheet Collapse Potentially Under Way for the ...klinck/Reprints/PDF/joughinScience2014.pdfThe exceptional Young’s modulus of aromat-ic PHTs, combined with the observed

Mellath thiranthathu kathavu - Yolaborrowminds.yolasite.com/resources/Mella_thirandhathu_kadhavu.pdf · Title: Mellath thiranthathu kathavu Author: RC Subject: entn. Keywords: Tamil

Test Plan for Helium Circulators (PHTS, SCS, SHTS) Documents/General Atomics... · Test Plan for Helium Circulators (PHTS, SCS, SHTS) ... Test Plan for Helium Circulators (PHTS,

Full page photo - H A F E Dhafed.nic.in/views/english/phts/circular.pdf · view the fact that they appear above officers of the rank of Secretaries ... spread over more than one District,

Effect of formic acid on pollutant decomposition in textile ..., aa , Żyłła R, e (Iet n tant etn n 7ete ateate ete t 7eatent y te entn et FIBRES TETILES in Eastern Europe 2014 22,

FUnt‰mdnb¬ · 2011-06-18 · FSpØp apdn]q´nbndßn. ss]ent®´s‚ ho´n¬ sN∂mWv B \SØw \n∂Xv. hnfns®gpt∂¬∏n®v ss]entN´t\mSv cayXs∏´n´mWv A®≥ XncnsI t]m∂Xv;

Getting the Whole Pediatric Picture with MR Quantification ......PTEN harmartoma tumor syndrome (PHTS) refers to a group of clinical syndroms of aberrant growth due to germline mutations

Annual Report - SHL Telemedicine · restructuring of our European activities, Personal Healthcare Telemedicine Services (PHTS) following the assumption of full ownership from Philips

RENTING BASICS · 6 entn ss A house. An apartment in a high-rise apartment building. A basement suite in a home that has a kitchen, bathroom, and living area. A condominium unit (condo)