mr-365-megane-6
TRANSCRIPT
![Page 1: MR-365-MEGANE-6](https://reader036.vdocuments.us/reader036/viewer/2022081805/54517528b1af9fcb428b4664/html5/thumbnails/1.jpg)
© Renault s.a.s. 2005
"The repair methods given by the manufacturer in this document are based on the technicalspecifications current when it was prepared.
The methods may be modified as a result of changes introduced by the manufacturer in theproduction of the various component units and accessories from which his vehicles areconstructed."
All copyrights reserved by Renault.
The reproduction or translation in part of whole of the present document, as well as the useof the spare parts reference numbering system, are prohibited without the prior writtenconsent of Renault.
77 11 318 162 AUGUST 2004 Edition Anglaise
X84, and B84 or C84 or G84 or S84
6 Sealing and soundproofing
65A OPENING ELEMENT SEALING
66A WINDOW SEALING
68A SOUNDPROOFING
![Page 2: MR-365-MEGANE-6](https://reader036.vdocuments.us/reader036/viewer/2022081805/54517528b1af9fcb428b4664/html5/thumbnails/2.jpg)
Mégane II - Section 6
Contents
Page
Mégane II - Section 6ContentsPage
65A OPENING ELEMENT SEALING
Front side door frame seal: Removal - Refitting 65A-1
Rear side door frame seal: Removal - Refitting 65A-2
Sunroof seal: Replacement 65A-4
66A WINDOW SEALING
Front door side exterior weather strip: Removal - Refitting 66A-1
Rear side door exterior weather strip: Removal - Refitting 66A-2
68A SOUNDPROOFING
Bonnet soundproofing: Removal - Refitting 68A-1
![Page 3: MR-365-MEGANE-6](https://reader036.vdocuments.us/reader036/viewer/2022081805/54517528b1af9fcb428b4664/html5/thumbnails/3.jpg)
65A-1
OPENING ELEMENT SEALINGFront side door frame seal: Removal - Refitting
B84 or C84 or S84
65A
REMOVAL
a Remove the door mirror (see 56A, Exterior acces-sories, Door mirror).
a Carefully remove the weatherstrip in the direction of(1) and (2) using tool (Car. 1363).
a Remove seat runner seal (3).
a Carefully unclip the door frame seal.
REFITTING
a Position the seal.
a Fit corner seal (4), taking care to slide it behind pa-nel (5).
a Proceed in the reverse order to removal.
Special tooling required
Car. 1363 Trim removal lever
101854
101465
1 2
3
101464
4
5
![Page 4: MR-365-MEGANE-6](https://reader036.vdocuments.us/reader036/viewer/2022081805/54517528b1af9fcb428b4664/html5/thumbnails/4.jpg)
65A-2
OPENING ELEMENT SEALINGRear side door frame seal: Removal - Refitting
B84
65A
REMOVAL
a Remove the door trim (see 72A, Side opening ele-ment trims, Front door trim).
a Unclip the exterior weatherstrip in the direction of (1)and (2) using tool (Car. 1363).
a Remove the interior weatherstrip.
a Remove:
- bolts (3),
- the fixed upright channel.
a Unclip the front section of the seal.
Special tooling required
Car. 1363 Trim removal lever
101571
101572
12
101573
101570
3
![Page 5: MR-365-MEGANE-6](https://reader036.vdocuments.us/reader036/viewer/2022081805/54517528b1af9fcb428b4664/html5/thumbnails/5.jpg)
65A-3
OPENING ELEMENT SEALINGRear side door frame seal: Removal - Refitting
B84
65A
a Unclip the upper clip from double seal (4).
a Remove the « seal and fixed window » assemblyfrom the door.
REFITTING
a Offer up the « seal and fixed window » to the door.
a Clip in interior surface seal (5).
a Position corner seal (6).
a Fit corner seal (6), taking care to slide it behind pa-nel (7)
a Proceed in the reverse order to removal.
101567
101568
4
101566
101569
5
6
7
![Page 6: MR-365-MEGANE-6](https://reader036.vdocuments.us/reader036/viewer/2022081805/54517528b1af9fcb428b4664/html5/thumbnails/6.jpg)
65A-4
OPENING ELEMENT SEALINGSunroof seal: Replacement
B84 or C84
65AREPLACEMENT
a Remove the mobile panel from the sunroof (see52A, Non-side opening element mechanisms,Sunroof mobile panel: Removal - Refitting).
a
a Clean and then degrease the bonding area with hep-tane.
a Position the seal weld on the rear centre section (2).
Bond the seal using adhesive, Part No.: 77 11 223369.
a Refit the mobile panel to the sunroof (see 52A, Non-side opening element mechanisms, Sunroof mo-bile panel: Removal - Refitting).
Initialise the sunroof motor (seeMR 371 87D, Elec-tric windows - Sunroof, Initialisation).
110853
WARNING
Replace the seal (1)after each removal.
1
109104
![Page 7: MR-365-MEGANE-6](https://reader036.vdocuments.us/reader036/viewer/2022081805/54517528b1af9fcb428b4664/html5/thumbnails/7.jpg)
66A-1
WINDOW SEALINGFront door side exterior weather strip: Removal - Refitting
B84 or C84 or S84
66A
REMOVAL
a Remove interior trim (1).
a Remove the door mirror retaining bolt.
a Disconnect the connector.
a Remove the door mirror.
a Carefully remove the weatherstrip in the direction of(2) and (3) using tool (Car. 1363).
REFITTING
a Proceed in the reverse order to removal.
Special tooling required
Car. 1363 Trim removal lever
101849
101848
1
101854
2 3
![Page 8: MR-365-MEGANE-6](https://reader036.vdocuments.us/reader036/viewer/2022081805/54517528b1af9fcb428b4664/html5/thumbnails/8.jpg)
66A-2
WINDOW SEALINGRear side door exterior weather strip: Removal - Refitting
B84 or S84
66A
REMOVAL
a Carefully remove the weatherstrip in the direction of(1) and (2) using tool (Car. 1363).
a Position the weatherstrip on fixed window (2).
a Clip on the weatherstrip.
Special tooling required
Car. 1363 Trim removal lever
101571
WARNING
The fixed window holds in the weatherstrip.
12
![Page 9: MR-365-MEGANE-6](https://reader036.vdocuments.us/reader036/viewer/2022081805/54517528b1af9fcb428b4664/html5/thumbnails/9.jpg)
68A-1
SOUNDPROOFINGBonnet soundproofing: Removal - Refitting
B84 or C84
68AREMOVAL
a Unclip the five clips using a pair of unclipping pliers.
a Release the bonnet soundproofing materialdownwards.
REFITTING
a Replace the clips if necessary.
a To refit, proceed in the reverse order of removal.
102102