mp ip strategy 2005-06-22 public stateye training (getting started) please enable author’s notes...

MP IP Strategy2005-06-22

public

Stateye Training (Getting Started)

Please enable author’s notes for a textual description of the slides. A audio file will be also made available with the same text for easy following.

Manfred DolagAlexander Weimann

confidential

Munich, December 14th, 2005


publicIntroduction Thanks to Dave Stauffer for his support & organisation of the

development of the Stateye v4.0 by Edotronik Stateye v4 is currently available from

www.edotronik.de/stateye and it is highly recommended that for 1st time users this training be followed as Stateye is still an expert tool

This training is aimed at beginner users of 1st release of the Stateye v4.0 statistical channel compliance tool

It is expected and planned that further releases of Stateye v4 based on alpha users feedback and final feature integration before a final release to the OIF and www.stateye.org open source developers forum is done

As of the 14th December 2005, support and bug reporting can be done via [email protected] and up to date information concerning reported bugs/fixes will be made available

Stateye v4 is a complete rewrite of the original Stateye, and now offers a flexible XML interface and object orientated structure for further development, with many parts in c++ for improved performance


publicRelease note Overview A1.1 A1.2 Previous resolution problems are solved through

time interpolation as opposed to frequency extrapolation A1.3 Amplitude calculation is now based on interpolation A1.4 Optimisation uses non-matlab based simplex method

which has given stable results. Alternative sweep methods can be also performed.

A2.1 Calculation of coefficients is in the presence of crosstalk, contrary to RFQ. During testing it was observed that crosstalk is fundamental to correct coefficient calculation of deemphasis due to noise enhancement

A2.2 A warning is generated when a crosstalk aggressor influence due to accuracy settings is neglected

A3 DC extrapolation is updated Although Stateye v4 should not include any graphical user

interfaces (GUI), a simple tool for touchstone file entry is included and further tools shall be developed by Edotronik subject to contact

Many minor bugs and instability in the pre v4 stateye have been eliminated and tested by OIF contributed testcases, numbering over 3500


publicRelease note Overview A4 Batch Processing

A4.1 An XML input format for structured parameter definitions is elaborated to ensure error free execution of the matlab scripts

A4.2 Full touchstone compatibility is ensured and tested

A4.3 XML object orientated tag definitions allow easy rerunning of any simulation

A4.4 Results are available via graphical and csv format from structured directory tree

A4.5 Input parameters are stored in csv file along with results

A4.6 Options are included in XML for graphical output, and maximum graphical information is generated for debug even under error conditions e.g. wrong ports

A5 TDR graphic included using standard methods, however, validity of TDR results to be discussed and possibly updated for v4.1


publicRelease note Overview A6 Continuous Linear Equaliser functionality integrated as

filter. Automatic adaption of filter based on channel response disabled for v4.0, but will be enabled for v4.1

B3 Cascade functionality agreed for v4.1, included in v4.0

V4.1 release will include

– extension to DC extrapolation for crosstalk agressor

– warning for insufficient s-parameter data

– Work around for MATLAB bug in handling invisible figures


publicStateye Objects


publicStart


publicDownloading Stateye


publicInstalling Stateye


publicStateye Installed


publicInstalling XRAY


publicInstallation Directory


publicExample Touchstone File


publicStarting SmatrixHelper


publicSelecting the filters


publicSelecting the Files


publicSelecting the Forward File


publicSelecting the Crosstalk Files


publicChanging the port definitions


publicSaving the XML definition files


publicCreating the XML directory


publicSaving My_smatrix.xml


publicCopying the Templates


publicOpening the Analysis definitions


publicRemoving unwanted runs


publicRemoving more unwanted runs


publicMaking a mistake in XML


publicOpening the Elaborator


publicSelecting My_analysis.xml


publicSaving the matlab script


publicChanging matlab directory


publicRunning the script


publicThe running script


publicThe output directory


publicOpening a fig file


publicAvailable fig files


publicOpening the results file


publicIn the results file


publicAdding a new channel


publicGenerating a new channel


publicOpening the smatrix definitions


publicCopying the smatrix definitions


publicPasting the smatrix definitions


publicRemoving unwanted XML


publicPasting the channellist


publicRemoving unwanted XML


publicCopying the channel id


publicPasting the chanel id


publicThe new output directory


publicThe new results file


publicGetting the ports wrong


publicAll looks fine


publicResults are wrong


publicForward channel is wrong


publicMultiple XML ids


publicErrors generated


publicSummary

Many to thanks to Birgit for the audio training file

Further training for expert use of stateye can be made available after the new year

In the meantime, support is available via [email protected]

Many thanks for your attention

mp ip strategy 2005-06-22 public stateye training (getting started) please enable author’s notes...

Documents

edotronik stateye v4

pre v4 stateye

releases of stateye

public stateye training

original stateye

results a4

tested a4

simulation a4