mp 8086 lab manual trainer kit

NANDHA ENGINEERING COLLEGE

(Autonomous Institution)

Erode-638 052

LAB MANUAL CUM

RECORD NOTE BOOK

13EC314 MICROPROCESSOR AND INTERFACINGLABORATORY

III-Semester

B.E (COMPUTER SCIENCE AND ENGINEERING)

PREPARED BY:

S.KAVITHA AP/CSE

E.PADMA AP/CSE

NANDHA ENGINEERING COLLEGE

Erode-638 052

(AUTONOMOUS)

BONAFIDE CERTIFICATE

Register Number:

Certified that this is the Bonafide Record of work done by... of

the Third Semester B.E COMPUTER SCIENCE AND ENGINEERING branch during the Academic Year

2014-2015 in the 13EC314 MICROPROCESSOR AND INTERFACING LABORATORY.

Staff-in-charge Head of the Department

Submitted for the End Semester Practical Examination

Held on.

Internal Examiner External Examiner

13EC314 MICROPROCESSOR AND INTERFACING LABORATORYIII Semester

B.E (COMPUTER SCIENCE AND ENGINEERING)

SYLLABUS

1. Study Experiments

i) Study of 8086 Architecture ii) Study of 8255 PPI

iii) Study of 8253 PIT iv)Study of 8279 PKI v)Study of 8259 PIC

2. Write an ALP to find out factorial of a given hexadecimal number using 8086 MP

Data: OAH, OFH, 1OH

3. Write an ALP to perform 16 bit arithmetic operations (ADD, SUB, MUL, and DIV)

4. Write an ALP to generate the sum of first N natural numbers using 8086 MP

5. Write an ALP to convert given hexadecimal number to binary using 8086 MP Data: ABH,

CDH, 101H

6. Write an ALP to convert given binary number to hexadecimal number using 8086MP

Data: 101010102, 111111112, 11002, 11112(Represent as ASCII)

7. Write an ALP to order given set of hexadecimal numbers in ascending and descending

order

Data: 0AH, 0FH, 0DH, 10H, 02H

8. Write an ALP to move block of data from locations 1200H-1205H to 2200H 2205H

9. Write an ALP to reverse the given string

Data: WELCOME

10. Write an ALP to generate the following series 1+1/x+1/x3+1/x5+ ..

11. Write an ALP to generate square wave using 8255 PPI

12. Write an ALP to generate rate generator using 8253 PIT

13. Write an ALP to interface keyboard with 8086 using 8279 PKI

14. Write an ALP to display the given message using 8279 PKI Message: COMPUTER

SCIENCES

15. Write an ALP to interface analog to digital converter

INDEX

Ex. No. DATE NAME OF THE EXPERIMENTSPAGE

NO.MARKS SIGN

1.

Study Experimentsi) Study of 8086 Architecture ii) Study of 8255 PPIiii) Study of 8253 PITiv) Study of 8279 PKIv) Study of 8259 PIC

2. Factorial of a given hexadecimal numberusing 8086 MP

3. 16 bit arithmetic operations

4.sum of first N natural numbers using 8086

MP

5. Conversion of given Hexadecimal number tobinary using 8086 MP

6.Conversion of given binary number to

hexadecimal number using 8086MP

7.Ordering given set of hexadecimal numbers

in ascending and descending order

8.Moving a block of data from locations

1200H-1205H to 2200H 2205H

9. Reversing the given string

10. Generating the following series

1+1/x+1/x3+1/x5+ ..11. Generating square wave using 8255 PPI

12. Generate rate generator using 8253 PIT

13Interface keyboard with 8086 using 8279

PKI

14. Interface analog to digital converter

AVERAGE MARKS AWARDED

Ex.No.:

DATE: STUDY EXPERIMENTS

AIM:

To Study the Architecture of 8086 , Study of 8255 PPI, Study of 8253 PIT, Study of

8279 PKI and Study of 8259 PIC.

Introduction:

Before getting into 8086 lets 1st define microprocessor. in simple words, a microporcessor is an

electronic device which computes on the given input similar to CPU of a computer. it is made by

fabricating millions(or billions) of transistors on a single chip.

Intel 8086:

The 8086 is a 16-bit microprocessor chip designed by Intel corporation in between early 1976 and

mid-1978.pin configuration:- picture below shows the 8086 pin-assignments in min and max mode:

Features of 8086 :-

1. 8086 is a 40 pin IC.

2. It is a 16-bit processor.

3. its operating voltage is 5 volts.

4. its operating frequency is 5 MHz.

5. total memory addresing capacty is 1MB (external).

6. It has 16-bit data bus and 20-bit address bus.

7. it has fourteen 16-bit registers.

8. higher throughput(speed).

9. It has around 20000 transistors in its circuitary and it is made in HMOS technology.

8255 PPI CHIP WORKING PRINCIPLE :

After completing this experiment, you should know the different operation modes of an

8255 PPI chip and how to configure the chip to operate in a particular operation mode. You should

also know how to use handshaking to transfer data in an interface.

Background

The 8255 PPI chip is a general purpose programmable I/O device which is designed for use

with all Intel and most other microprocessors. The 8255 has 24 I/O pins divided into 3 groups of 8

pins each. The groups are denoted by port A, port B and port C respectively. Every one of the ports

can be configured as either an input port or an output port.

The 8255 can be programmable in three different modes:

Mode 0: simple unidirectional input/output without handshaking

Mode 1: unidirectional input/output with handshaking via some pins of port C

Mode 2: bidirectional input/output with handshaking via some pins of port C

Handshaking is a common technique used to transfer data in an interface. A computer and a

device usually operate at different system clock rates and hence the data transfer between their

corresponding I/O interface may not be so reliable. For example, the device might not be fast

enough to catch the data transmitted from the CPU. Handshaking provides a means to improve the

reliability of a data transfer.

Method and details

In this lab, you will study how to program an 8255 PPI chip to operate in different operation

modes with an 8051 evaluation board and an 8255 evaluation board. Figure 1 shows the setup of

the system. You are requested to modify some given 8051 program modules with a text editor in a

computer. The modified programs, when they are run in the 8051 evaluation board, should be able

to program port A and port B of the 8255 in the 8255 evaluation board to operate in one of their

operation modes. You can assemble and link your program modules with the provided cross-

assembler and linker to generate executable files. Executable files can then be loaded to the 8051

evaluation board via the printer port of the computer to program the on-board AT89S8252. The

AT89S8252 is a low-power, high -performance CMOS 8-bit microcomputer with 8K bytes of

Downloadable Flash programmable and erasable read only memory and 2K bytes of EEPROM.

The device is manufactured by Atmel and is compatible with the industry standard 80C51

instruction set and pinout.

printer

Computer

port 8051

8051

8255

evaluation evaluation

local bus

board board

Figure 1. Setup of the system

After programming the AT89S8252, the AT89S8252 executes the loaded program to

configure the 8255 and the ports of the 8255 should operate in the desired modes.

As there are 3 ports in 8255 and each one of them can be programmed as an input or output

port, there are a number of possible configurations. In this lab, four configurations given in Table 1

will be studied.

configuration Port A Port B Port C

1 Mode 0, input Mode 0, output Dont care

2 Mode 1, input Mode 0, output Handshake for port A

3 Mode 0, input Mode 1, output Handshake for port B

4 Mode 1, input Mode 1, output Handshake for ports A and B

TABLE 1: CONFIGURATION OF 8255

STUDY OF 8253-PIT

The Intel 8253 is a programmable counter/timer chip designed for use as an Intel

microcomputer peripheral. It is packaged in a 24-pin plastic DIP. Six programmable timer modes

allow the 8253 to be used as an event counter, elapsed time indicator, programmable one-shot, and

in many other applications e.g., to create different intervals.

It has 3 counters: Counters 0, 1, 2

BLOCK DIAGRAM OF 8253

Each counter in the block diagram has 3 lines connected to it. Two of these lines,clock and gate,

are inputs. The third, labeled OUT is an output. The function of these lines changes and

depends on how the device is initialized or programmed.

INTERPRETATION OF THE TIMER CONTROL BYTE:

Bits 7,6: Counter Selection (00 to 10)

Bits 5,4: Read/load mode for 2-byte count value:

00 -- latch count for reading

01 -- read/load high byte only

10 -- read/load low byte only

11 -- read/load low byte then high byte

Bits 3,2,1: Count mode selection (000 to 101)

Bit 0: 0/1- Count in binary/BCD.

MODES OF OPERATION OF 8253:

There are 6 modes of operation of 8253 .

Differences in modes are:

OUT signal in different shapes like low-high or high- low, periodic or non-periodic

How to trigger/start the counter

Mode 0 and 1 are same in shape (non-periodic)

Mode 4 and 5 are same in shape (non-periodic)

Mode 2 and 3 are almost same in shape(periodic)

MODES OF OPERATION OF 8253:

Mode 0: Set Output Bit when timer done.

The output will start off zero. The count is loaded and the timer will start to count down.

When the count has reached zero the output will be set high, and remain high until the next

count has been reloaded.

Mode 1: Programmable One-Shot.

The output will go low following the rising edge of the gate input. The counter will count and the

output will go high once the counter has reached zero.

Mode 2: Rate Generator. The counter will continually count down, when the count

reaches zero, the output will pulse low and the counter will be reloaded.

Mode 3: Square Wave Generator.

This mode is similar to Mode 2 except the output remains low for half of the timer period and

high for the other half of the period.

Mode 4: Software Triggered Pulse.

The output will remain high untill the timer has counted to zero, at which point the output will

pulse low and then go high again.

Mode 5: Hardware Triggered Pulse.

The counter will start counting once the gate input goes high, when the counter reaches zero the

output will pulse low and then go high again.

If 6 is loaded in the counter then it will start count down from 60. After reaching 0,change the OUT signal like from LoHi. First 2 MSBs select the counter. Addressesfor 3 counters in flight boards 8253 are:

Register Activity Allowed Port Address

Counter 0 Read/Write 08H

Counter 1 Read/Write 0AH

Counter 2 Read/Write 0CH

Control Word Write Only 0EH

8259 PIC

The 8259 Programmable Interrupt Controller (PIC) is one of the most important chips

making up the x86 architecture. Without it, the x86 architecture would not be an interrupt driven

architecture. The function of the 8259A is to manage hardware interrupts and send them to the

appropriate system interrupt. This allows the system to respond to devices needs without loss of

time (from polling the device, for instance).

It is important to note that APIC has replaced the 8259 PIC in more modern systems,

especially those with multiple cores/processors. The 8259 PIC controls the CPU's interrupt

mechanism, by accepting several interrupt requests and feeding them to the processor in order. For

instance, when a keyboard registers a keyhit, it sends a pulse along it's interrupt line (IRQ 1) to the

PIC chip, which then translates the IRQ into a system interrupt, and sends a message to interrupt

the CPU from whatever it is doing. Part of the kernel's job is to either handle these IRQs and

perform the necessary procedures (poll the keyboard for the scancode) or alert a userspace program

to the interrupt (send a message to the keyboard driver).

Without a PIC, you would have to poll all the devices in the system to see if they want to do

anything (signal an event), but with a PIC, your system can run along nicely until such time that a

device wants to signal an event, which means you don't waste time going to the devices, you let the

devices come to you when they are ready.

VIVA QUESTION:

1. What is micro processor?

2. State different parts of 8086.

3. State the modes 8255.

4. What are modes of 8253?

5. What is handshaking?

MARK ALLOCATION

RESULT:

Thus the 8086 Architecture, 8255 PPI, 8253 PIT, 8279 PKI and 8259 PIC has been studied.

CONTINUOUS INTERNAL ASSESSMENT

Preparation &conduct of experiment 50

Observation & result 30

Record 10

Viva voce 10

Total 100

ADDITIONAL PROGRAM:

1.STUDY 8279 - PKI

Ex.No.:

DATE:FACTORIAL OF A GIVEN HEXA DECIMAL NUMBER

AIM:

To write an assembly language program to calculate factorial of a given numbers.

ALGORITHM:

1. Start the program.

2. Move immediately the number 0000H to AX register.

3. Copy the contents of the memory 3000 to CX register.

4. Move immediately the number 0001H to AX register.

5. Multiply the content of the CX register with the content of accumulator.

6. Decrement the content of CX register once.

7. Jump to specified memory location if there is no zero in CX register.

8. Copy the content to AX register to two memories from 2000.

9. End

PROGRAM:

PROGRAM COMMENTS

MOV AX, 0001 Move immediately the number 0001H to AX register

MOV CX, [3000] Copy the contents of memory 3000 to CX register

MOV AX, 0001 Move immediately the number 0000H to AX register

Loop1 :MUL CX Multiply content of CX register with content of accumulator

DEC CX Decrement content of CX register once

JNZ loop1 Jump to specified memory location if there is no zero in CX register

MOV [2000], AX Copy content to AX register to memory 2000

HLT Halt

OUTPUT:

VIVA QUESTIONS:

1. Mention the general purpose registers in 8085 microprocessor.

2. What is the function of accumulator?

3. What is buffer?

4. What is Opcode?

5. What is Operand?

MARK ALLOCATION:

RESULT:

Thus the program for performing factorial of a given numbers is executed and verified.




Record 10

Viva voce 10

Total 100

ADDITIONAL PROGRAM:

1. Write an ALP to generate Fibonacci number using 8086 MP.

Ex.No.:

DATE:16 BIT ARITHMETIC OPERATION

AIM:

To write an assembly language program for doing arithmetic operations like addition,

subtraction, multiplication and division operation of two numbers.

ALGORITHM:

(i) 16-bit addition

1. Initialize the MSBs of sum to 0

2. Get the first number.

3. Add the second number to the first number.

4. If there is any carry, increment MSBs of sum by 1.

5. Store LSBs of sum.

6. Store MSBs of sum.

(ii) 16-bit subtraction

1. Initialize the MSBs of difference to 0

2. Get the first number

3. Subtract the second number from the first number.

4. If there is any borrow, increment MSBs of difference by 1.

5. Store LSBs of difference

6. Store MSBs of difference.

(iii) 16-bit addition multiplication

1. Get the multiplier.

2. Get the multiplicand

3. Initialize the product to 0.

4. Product = product + multiplicand

5. Decrement the multiplier by 1

6. If multiplicand is not equal to 0, repeat from step (d) otherwise store the product.

(iv) 16-bit addition division

1. Get the dividend

2. Get the divisor

3. Initialize the quotient to 0.

4. Dividend = dividend divisor

5. If the divisor is greater, store the quotient. Go to step g.

6. If dividend is greater, quotient = quotient + 1. Repeat from step (d)

7. Store the dividend value as remainder.

PROGRAM

1. Addition:

PROGRAM COMMENTS

MOV CX, 0000H Initialize counter CX

MOV AX,[1200] Get the first data in AX reg

MOV BX, [1202] Get the second data in BX reg

ADD AX,BX Add the contents of both the regs AX & BX

JNC L1 Check for carry

INC CX If carry exists, increment the CX

L1 : MOV [1206],CX Store the carry

MOV [1204], AX Store the sum

HLT Stop the program

2. Subtraction:PROGRAM COMMENTS

MOV CX, 0000H Initialize counter CX

MOV AX,[1200] Get the first data in AX reg

MOV BX, [1202] Get the second data in BX reg

SUB AX,BX Subtract the contents of BX from AX

JNC L1 Check for borrow

INC CX If borrow exists, increment the CX

L1 : MOV [1206],CX Store the borrow

MOV [1204], AX Store the difference


3. Multiplication:

PROGRAM COMMENTS

MOV AX,[1200] Get the first data

MOV BX, [1202] Get the second data

MUL BX Multiply both

MOV [1206],AX Store the lower order product

MOV AX,DX Copy the higher order product to AX

MOV [1208],AX Store the higher order product


4. Division:

PROGRAM COMMENTS

MOV AX,[1200] Get the first data

MOV DX, [1202] Get the second data

MOV BX, [1204] Divide the dividend by divisor

DIV BX Store the lower order product

MOV [1206],AX Copy the higher order product to AX

MOV AX,DX Store the higher order product

MOV [1208],AX Stop the program

HLT Get the first data

OUTPUT:

VIVA QUESTION:

1. What are the operations can be performed by logical operators?

2. Compare subtract and compare instructions.

3. What is the data and address size in 8086?

4. What is the difference between instructions DIV & IDIV?.

5. What is immediate addressing?

MARK ALLOCATION:

RESULT:

Thus the program for 16 bit arithmetic operation is executed and verified.




Record 10

Viva voce 10

Total 100

ADDITIONAL PROGRAM:

1. Write an ALP to search a numbers in a sequence using 8086 MP

Ex.No.:

DATE: SUM OF N NATURAL NUMBERS

AIM:

To write an assembly language program for performing the sum of N natural numbers.

ALGORITHM:

1. Get N natural numbers as input.

2. Initialize the contents.

3. Increment register & decrement the count.

4. Set memory address for destination.

5. Move content values to destination location as total sum.

6. Store the total sum.

PROGRAM:

PROGRAM COMMENTS

MOV SI, 2000 Set source index as 2000

MOV CL, [SI] Move content of address pointed by source index to CLMOV AL, 00 Clear AL to store sum

MOV BL, 01 Move '1' to BL , as its the first numberLOOP:ADD AL, BL Add content of BL to AL

INC BL increment BL

DEC CL Decrement the countJNZ LOOP Jump if not zero to LoopMOV DI, 2002 Set Destination index as memory address 2002

MOV [DI], AX Move content of Register A to destination, which is the total sumHLT Stop the program

OUTPUT:

VIVA QUESTION:

1. What are the modes in which 8086 can operate?

2. List the instructions of 8086 that affects only carry flag.

3. What is the difference between jump and call instructions?

4. List the I/O instructions of 8086.

5. What is implied addressing?

MARK ALLOCATION:

RESULT:

Thus the program for performing the sum of N natural numbers is executed and

verified.




Record 10

Viva voce 10

Total 100

ADDITIONAL PROGRAM:

1. Write an ALP to search a string using 8086 MP

Ex.No.:

DATE: CONVERSION OF HEXADECIMAL TO BINARY

AIM:

To write an assembly language program to convert hexadecimal to binary.

ALGORITHM:

1. Load AL with the input data.

2. Check If (AL

OUTPUT:

VIVA QUESTION:

1. What is meant by interrupt?

2. What is the use of ready pin?

3. State the machine control instructions.

4. What are the flags in 8086?

5. What relative addressing?

MARK ALLOCATION

RESULT:

Thus the program for conversion of hexadecimal to binary (ASCII value) is executed and

verified.




Record 10

Viva voce 10

Total 100

ADDITIONAL PROGRAM:

1. Write an ALP to find and replace a string using 8086 MP.

Ex.No.:

DATE:CONVERSION OF BINARY TO HEXADECIMAL

AIM:

To write an assembly language program to convert binary to hexadecimal.

ALGORITHM:

1. Load the input data in AL register.

2. Subtract 30 from AL register value.

3. If data is less than or equal to 16 terminate the program.

4. Else subtract 7 from AL register value.

5. Result stored in AL register

PROGRAM:

PROGRAM COMMENTS

MOV AL,31 Get data 31 into AL

SUB AL,30 Subtract 30 with the AL

CMP AL,10 If data is less than or equal to 16 go to 110C

JB 110C If 1st operand is below the 2nd operand then short jump into 110C

JZ 110C If count zero then jump into to 110C

SUB AL,07 Else subtract 7 from AL register value

HLT Break point

OUTPUT:

VIVA QUESTION:

1. What is register addressing?

2. What is Program counter?

3. What is meant by Maskable interrupts?

4. What is Logical Address?

5. What are Mnemonics? Give example.

MARK ALLOCATION:

RESULT:

Thus the program for conversion of binary (Represented in ASCII value) to hexadecimal

is executed and verified.




Record 10

Viva voce 10

Total 100

ADDITIONAL PROGRAM:

1. Write an ALP to generate the largest and smallest number using 8086 MP.

Ex.No.:

DATE:ASCENDING AND DESCENDING ORDER

AIM:

To write an Assembly Language Program to sort a given array in ascending and

descending order.

ALGORITHM:

(i) Sorting in ascending order:

1. Load the array count in two registers C1 and C2.

2. Get the first two numbers.

3. Compare the numbers and exchange if necessary so that the two numbers are in ascending order.

4. Decrement C2.

5. Get the third number from the array and repeat the process until C2 is 0.

6. Decrement C1 and repeat the process until C1 is 0.

(ii) Sorting in descending order: 1. Load the array count in two registers C1 and C2.

2. Get the first two numbers.

3. Compare the numbers and exchange if necessary so that the two numbers are in

descending order.

4. Decrement C2.

5. Get the third number from the array and repeat the process until C2 is 0.6. Decrement C1 and repeat the process until C1 is 0.

PROGRAM:

1. ASCENDING

PROGRAM COMMENTS

MOV SI,1200H Initialize memory location for array size

MOV CL,[SI] Number of comparisons in CL

L4 : MOV SI,1200H Initialize memory location for array size

MOV DL,[SI] Get the count in DL

INC SI Go to next memory location

MOV AL,[SI] Get the first data in AL

L3 : INC SI Go to next memory location

MOV BL,[SI] Get the second data in BL

CMP AL,BL Compare two datas

JNB L1 If AL < BL go to L1

DEC SI Else, Decrement the memory location

MOV [SI],AL Store the smallest data

MOV AL,BL Get the next data AL

JMP L2 Jump to L2

L1 : DEC SI Decrement the memory location

MOV [SI],BL Store the greatest data in memory location


DEC DL Decrement the count

JNZ L3 Jump to L3, if the count is not reached zero

MOV [SI],AL Store data in memory location

DEC CL Decrement the count


HLT Stop

2. DESCENDINGPROGRAM COMMENTS

MOV SI,1200H Initialize memory location for array size

MOV CL,[SI] Number of comparisons in CL

L4 : MOV SI,1200H Initialize memory location for array size

MOV DL,[SI] Get the count in DL

INC SI Go to next memory location

MOV AL,[SI] Get the first data in AL


MOV BL,[SI] Get the second data in BL

CMP AL,BL Compare two datas

JB L1 If AL > BL go to L1

DEC SI Else, Decrement the memory location

MOV [SI],AL Store the largest data

MOV AL,BL Get the next data AL

JMP L2 Jump to L2

L1 : DEC SI Decrement the memory location

MOV [SI],BL Store the smallest data in memory location


DEC DL Decrement the count


MOV [SI],AL Store data in memory location

DEC CL Decrement the count


HLT Stop

OUTPUT:

VIVA QUESTION:

1. From which address the 8086 starts execution after reset?

2. What are the modes in which 8086 can operate?

3. What is the data and address size in 8086?

4. What is purpose served by CX register?

5. Which are pointers present in this 8086

MARK ALLOCATION:

RESULT:

Thus the program for sorting a given array in ascending and descending order is executed

and verified.




Record 10

Viva voce 10

Total 100

ADDITIONAL PROGRAM:

1. Write an ALP to separate odd and even numbers using 8086 MP

Ex.No.:

DATE:

MOVING DATA FROM SOURCE LOCATION TO DESTINATION

LOACTION

AIM:

To write an Assembly Language Program to moving data from source location to

destination location (1200H-1205H to 2200H 2205H).

ALGORITHM:

1. Move the count value in the source index register.

2. Move the count value to CL register.

3. Increment source index register.

4. Move the contents of source index to AL.

5. Move the contents of AL to destination index.

6. Increment the destination index.

7. Increment the source index.

8. Decrement the contents of CL register

9. If no zero jump to the loop.

10. Stop the program.

PROGRAM:

PROGRAM COMMENTSLEA SI,[2000] Move the count value in the source index register.

LEA DI,[2200] Move the count value to CL register.

MOV CL,[CL] Move contentsINC SI Increment source index register.

L1:MOV AL,[SI] Move the contents of source index to AL.

MOV [DI],AL Move the contents of AL to destination index.

INC DI Increment the destination index.

INC SI Increment the source index.

DEC CL Decrement the contents of CL register

JNZ L1 If no zero jump to the loop.

HLT Stop

OUTPUT:

VIVA QUESTION:

1. What are data copy/transfer instructions?

2. Define index register.

3. Differentiate near and far jump.

4. Define software interrupt.

5. What us the purpose of RET instructions?

MARK ALLOCATION:

RESULT:

Thus the program for moving data from source location to destination location is

executed and verified.




Record 10

Viva voce 10

Total 100

ADDITIONAL PROGRAM:

1. Write an ALP to convert BCD to hexadecimal using 8086 MP.

Ex.No.:

DATE:REVERSING THE STRING

AIM:

To write an Assembly Language Program for reversing the given string.

ALGORITHM:

1. AX is initialized with data & AX is moved into DS

2. Initialize CX to 5

3. Load the effective address in SI & DI. Add SI with 04

4. Move SI to AL

5. Decrement SI & Increment DI. Repeat this until an interrupt is raised

6. Stop the Process.

PROGRAM:

PROGRAM COMMENTSMOV SI,2000 Move value of address 2000 to source index

MOV DI,2008 Move value of address 2008 to destination index

MOV CX,0008 Move 0008 to CXADD SI,07 ADD SI AND 07UP:MOV AL,[SI] Move value of SI to AL

MOV [DI],AL Move AL to the destination addressDEC SI Decrement SIINC DI Increment DIDEC CX Decrement CXJNZ UP JumpEND Stop the Process

OUTPUT

VIVA QUESTION:

1. Differentiate shift and rotate?

2. List the string manipulation commands.

3. What is the use of direction flag?

4. Difference between Microprocessor & Microcontroller

5. What is the maximum memory addressing and I/O addresing capabilities of 8086?

MARK ALLOCATION:

RESULT:

Thus the program for reversing the string is executed and verified




Record 10

Viva voce 10

Total 100

ADDITIONAL PROGRAM:

1. Write an ALP to find square root of a given numbers using 8086 MP.

Ex.No.:

DATE:GENERATING THE SERIES

AIM:

To write an Assembly Language Program for generating the series.

.

ALGORITHM:

PROGRAM:

OUTPUT:

VIVA QUESTION:

1. What is the purpose of BIU?

2. What is the purpose of EU?

3. What is the purpose of segment register?

4. What are the segments registers in 8086?

5. What is the function of IP?

MARK ALLOCATION:

RESULT:

Thus the program for generating the series is executed and verified.




Record 10

Viva voce 10

Total 100

ADDITIONAL PROGRAM:

1. Write an ALP to convert BCD to decimal numbers using 8086 MP.

Ex.No.:

DATE:GENERATING SQUARE WAVE USING 8255 PPI

AIM:

To write an Assembly Language Program for generating square wave using 8255 PPI.

ALGORITHM:

1. Initialize channel 0 in mode 3

2. Initialize the LSB of the count.

3. Initialize the MSB of the count.

4. Trigger the count

5. Read the corresponding output in CRO.

PROGRAM:

MODES 3 SQUARE WAVE GENERATOR:

PROGRAM COMMENTS

MOV AL, 36H Store the control word in accumulator

OUT 0BH Send through output port

MOV AL, 0AH Copy lower order count value in accumulator

OUT 08H Send through output port

MOV AL, 00H Copy higher order count value in accumulator


HLT Stop

OUTPUT:

VIVA QUESTION:

1. Write any two processor control instructions.

2. Mention any four initialization list in the 8086 program.

3. What are the assembly language program development tools?

4. What is an assembler directive?

5. Define SEGEMNT and ENDS.

MARK ALLOCATION:

RESULT:

Thus the program for generating the square wave is executed and verified.




Record 10

Viva voce 10

Total 100

ADDITIONAL PROGRAM:

1. Write an ALP to generate sine wave using 8086 MP.

Ex.No.:

DATE:GENERATING RATE GENERATOR USING 8253 PIT

AIM:

To write an assembly language program for generating rate generator using 8253 PIT.

ALGORITHM

1. Initialize channel 0 in mode 2

2. Initialize the LSB of the count.

3. Initialize the MSB of the count.

4. Trigger the count

5. Read the corresponding output in CRO.

PROGRAM:

MODE 2 RATE GENERATOR:

PROGRAM COMMENTS

MOV AL, 34H Store the control word in accumulator

OUT 0BH Send through output port

MOV AL, 0AH Copy lower order count value in accumulator


MOV AL, 00H Copy higher order count value in accumulator


HLT Stop

OUTPUT:

VIVA QUESTION:

1. What is minimum mode?

2. What is maximum mode?

3. What is machine cycle?

4. What is instructions cycle?

5. What are the minimum mode signals

MARK ALLOCATION:

RESULT:

Thus the program for generating the rate generator is executed and verified.




Record 10

Viva voce 10

Total 100

ADDITIONAL PROGRAM:

1. Write an ALP to generate triangular wave using 8086 MP.

Ex.No.:

DATE:INTERFACE KEYBOARD WITH 8086 USING 8279 PKI

AIM:

To write an assembly language program for interfacing keyboard with 8086 using 8279 PKI.

ALGORITHM:

1. Initialize the counter

2. Set 8279 for 8 digit character display, right entry

3. Set 8279 for clearing the display

4. Write the command to display

5. Load the character into accumulator and display it

6. Introduce the delay

7. Repeat from step 1

PROGRAM:

PROGRAM COMMENTS

START : MOV SI,1200H Initialize array

MOV CX,000FH Initialize array size

MOV AL,10 Store the control word for display mode

OUT C2,AL Send through output port

MOV AL,CC Store the control word to clear display


MOV AL,90 Store the control word to write display


L1 : MOV AL,[SI] Get the first data


CALL DELAY Give delay

INC SI Go & get next data

LOOP L1 Loop until all the datas have been taken

JMP START Go to starting location

DELAY : MOV DX,0A0FFH Store 16bit count value

LOOP1 : DEC DX Decrement count value

JNZ LOOP1 Loop until count values becomes zero

RET Return to main program

OUTPUT:

VIVA QUESTION:

1. List the functions performed by 8279.

2. What are the different types of ADC?

3. What is baud rate?

4. What are the different scan modes of 8259?

5. What is scanning in keyboard?

MARK ALLOCATION:

RESULT:

Thus the program for interface keyboard with 8086 using 8279 PKI is executed and verified




Record 10

Viva voce 10

Total 100

ADDITIONAL PROGRAM:

1. Write an ALP to display HELP US using 8086 MP.

Ex.No.:

DATE:INTERFACE ANALOG TO DIGITAL CONVERTER

AIM:

To write an assembly language program for interfacing analog to digital converter.

ALGORITHM:

1. Select the channel and latch the address.

2. Send the start conversion pulse.

3. Read EOC signal.

4. If EOC = 1 continue else go to step (iii)

5. Read the digital output.

6. Store it in a memory location

PROGRAM:

PROGRAM COMMENTS

MOV AL,00 LOAD ACCUMULATOR WITH VALUE FOR ALE HIGH

OUT 0C8H,AL SEND THROUGH OUTPUT PORT

MOV AL,08 LOAD ACCUMULATOR WITH VALUE FOR ALE LOW

OUT 0C8H,AL SEND THROUGH OUTPUT PORT

MOV AL,01 STORE THE VALUE TO MAKE SOC HIGH IN THE ACCUMULATOR

OUT 0D0H,AL SEND THROUGH OUTPUT PORT

MOV AL,00

INTRODUCE DELAYMOV AL,00

MOV AL,00

MOV AL,00 STORE THE VALUE TO MAKE SOC LOW THE ACCUMULATOR

OUT 0D0H,AL SEND THROUGH OUTPUT PORT

L1 : IN AL, 0D8H

AND AL,01 READ THE EOC SIGNAL FROM PORT & CHECK FOR END OF

CONVERSIONCMP AL,01

JNZ L1 IF THE CONVERSION IS NOT YET COMPLETED, READ EOC SIGNAL

FROM PORT AGAIN

IN AL,0C0H READ DATA FROM PORT

MOV BX,1100 INITIALIZE THE MEMORY LOCATION TO STORE DATA

MOV [BX],AL STORE THE DATA

HLT STOP

OUTPUT:

VIVA QUESTIONS:

1. What is port?

2. Give some port devices used in 8086.

3. State some features of 8259.

4. What is exception?

5. State Intel predefined interrupt.

MARK ALLOCATION:

RESULT:

Thus the program for interfacing analog to digital converter is executed and verified.




Record 10

Viva voce 10

Total 100

ADDITIONAL PROGRAM:

1. Write an ALP by interfacing 8255 with 8086 in mode 0, mode 1.

mp 8086 lab manual trainer kit

Documents

study experimentsi study

ppiiii study

pitiv study

pkiv study

study experimentsaim

given message

study of8279 pki

given hexadecimal numberusing