move-series - brecoflex co. · 2019-10-25 · 3 move-series® advantages 3d model standard...
TRANSCRIPT
The World Leader In Polyurethane Timing Belts
B115
move-series®
The New Generation of Timing Belts
2 move-series®
move-series®
The New Generation of Timing Beltsmove-series® is a superior strength timing belt designed for high-performance drives. It is available as open-ended code M for linear drive applications and truly endless code BFX for power transmission applications. This new generation of timing belt delivers the power that modern applications require, with custom-engineered steel cord tension members and tooth geometry optimized through 3D motion FEA. This allows for up to 75% more tensile strength and reduces areas of high stress.
move-series® provides a durable solution, with a friction-optimizing laminate coating to minimize wear and increase service life. move-series® affords space and cost savings. With a higher transmittable force, belt drives can be more compact and powerful.
• 75% higher stiffness and tensile strength
• 30% higher transmittable force
• permits reducing the belt width by one standard size
• narrower drive reduces drive inertia and noise
• reduced wear and increased service life
• more chain to belt conversions possible
• significantly increases safety factor when staying with original width
A belt drive is often limited by the tooth shear strength. To reduce this limitation, BRECOflex analyzed the tooth geometry of standard AT-Series timing belts using 3D motion FEA (Finite Elements Analysis). The results yielded an optimized tooth geometry that reduces areas of high stress and makes the allowable belt load 30% greater than other AT-series belts. This optimal tooth geometry works with standard pulleys and will outperform when paired with high precision BRECOflex pulleys.
NOTE: BRECOflex CO., L.L.C. highly recommends the use of hard anodized aluminum pulleys for the longest service life.
Optimized Tooth Geometry
3
move-series®
Advantages
3D Model Standard move-series
Custom-engineered steel cord tension members deliver up to 75% more tensile strength compared to standard AT-series tension members.
Another unique property of the move timing belt is a special laminate coating that is used to further reduce friction between belt and pulley. This minimizes wear and ensures quiet tooth engagement, and smooth running.
Belt stiffness is the most important parameter in linear drives and is often the limit of drive accuracy. High move stiffness provides reduced settling times over the standard AT10 and AT15. When combined with our zero-backlash drive pulleys no belt comes close to the precision of move timing belts.
Unprecedented Cord Strength & Stiffness
4 move-series®
move-series®
AT10 Pitch Open-Ended “M”
Widths (mm)
Specifications
Standard Material
move Tension Member
Belt Color
TPUST1
25
Open-Ended ”M”
32 50 75 100
Steel
Lengths Any lengths available - Stock Rolls 50 Meters
White / Red
move-series® Flexibility(minimum tooth count/minimum diameter)
Power Comparison35
30
25
20
15
10
5
0
AT10 MOV AT10 HTD 8M
RPM
Pow
er [W
/cm
/toot
h]
0 500 1000 1500 2000 2500 3000 3500 4000
Construction
Open-Ended“M”
Tension-memberBelt Width (mm)
32 50 75 10025
AT10move Belt “M” Specifications
AT10-move Tension Member
Specific Stiffness
Belt Mass
7,395 9,135 14,790 22,185 29,580
1.85 - 106 2.28 - 106 3.70 - 106 5.55 - 106 7.40 - 10 6
Dimension
F [N]zul
C [N]spec
[kg/m/cm]
Construction
Open-Ended“M”
Tension-memberBelt Width (mm)
50 75 100 150
AT15move Belt “M” Specifications
AT15move Tension Member
Specific Stiffness
Belt Mass
18,200 27,300 36,400 54,600
4.55 - 106 6.82 - 106 9.10 - 106 13.65 - 106
0.070 kg per meter of belt length per cm of belt width
Dimension
F [N]zul
C [N]spec
[kg/m/cm]
Construction
Truly Endless“BFX”
Tension-memberBelt Width (mm)32 50 75 10025
AT10move Belt “BFX” Specifications
AT10-move Tension Member
Belt Mass
6,750 8,625 13,470 20,200 26,940
Dimension
[kg/m/cm]
F [N]zul
Construction Tension-memberBelt Width (mm)
AT15move Belt “BFX” Specifications
AT15move Tension Member
Belt Mass
Dimension
F [N]zul
[kg/m/cm]
Truly Endless“BFX”
0.173 0.222 0.347 0.520 0.693
0.175 0.221 0.351 0.526 0.701
32 50 75 10025
8,450 11,050 17,550 26,000 35,100
0.237 0.303 0.473 0.710 0.946
Zmin
dmin
Zmin
dmin
Drive w/o back bending
Drive with back bending
Tension MemberConstructionZmin
dmin(mm)
Tension MemberConstructionZmin
dmin(mm)
AT15moveTension Member
AT15moveTension Member
M/BFX20
100
M/BFX25
120
Zmin
dmin
Zmin
dmin
Drive w/o back bending
Drive with back bending
Tension MemberConstructionZmin
dmin(mm)
Tension MemberConstructionZmin
dmin(mm)
AT10moveTension Member
AT10moveTension Member
M/BFX18
60
M/BFX25
120
5
move-series®
AT10 Pitch Open-Ended “M”
move-series AT10
AT10
0.300
0.200
0.100
0.000
-0.100
-0.200
-0.300
Dist
ance
[mm
]
Time [s]0.000 0.050 0.100 0.150 0.200 0.250 0.300 0.350 0.400
Settling Time
Open ended move-series® demonstrates its strengths particularly well in linear drive applications.This chart shows how the stiffness of move dramatically reduces settling time.
AT10move - M
R.P.M.n [min]
R.P.M.n [min]
FUSPEC[N/cm]
FUSPEC[N/cm]
AT10move RPM 0-1900 AT10move RPM 2000-10000
R.P.M.n [min]
R.P.M.n [min]
FUSPEC[N/cm]
FUSPEC[N/cm]
020406080100200300400500600700
113.2111.5110.0108.6107.2105.8100.195.691.688.485.582.7
800900
1000110012001300140015001600170018001900
80.478.276.274.472.771.169.668.266.865.664.463.1
200022002400260028003000320034003600380040004500
500055006000650070007500800085009000950010000
62.160.158.256.454.753.151.750.449.147.946.743.9
41.439.337.335.433.632.030.429.027.626.425.1
Ordering Example: move-series® Timing Belt[WIDTH] [PITCH] / [LENGTH] [CONSTRUCTION]
50 AT10 MOV / 3750 M
6 move-series®
move-series®
AT10 Pitch Truly Endless “BFX”
Widths (mm)
SpecificationsTruly Endless “BFX”
Standard Material
move Tension Member
Belt Color
TPUST1
25 32 50 75 100
Steel
LengthsStandard lengths listed below.
Additional lengths available up to 30,500mm. In between lengthsavailable starting at a minimum of 1,400mm.
White / Red
AT10move is a next generation timing belt with enhanced performance properties. It is available as open-ended code M for linear drive application and truly endless BFX for power transmission applications. Choose AT10move as a stiffer, more compact and longer lasting alternative to standard AT10, ATS15 and AT20 belts. Customers that switch from standard AT10 to move-series® see a significant increase in wear resistance, tensile strength, transmittable force and service life.
1080
840
980 1600
1400
1500 2120
780
1240
1800
1900
2000
720
1150
1700
2500
2360
2240
AT10move Standard Lengths (mm)
3750
3350
3550 5000
4500
4750 6700
6000
6300
8000
9000
3150
4250
5600
7500
4000
5300
7100
2800
2650
3000
In-between lengths available from 1,400 to 30,500mm
Pitch/LengthVersion
Numberof Teeth
AT10 MOV / 720 BFXAT10 MOV / 780 BFXAT10 MOV / 840 BFXAT10 MOV / 980 BFXAT10 MOV / 1080 BFXAT10 MOV / 1150 BFXAT10 MOV / 1240 BFXAT10 MOV / 1400 BFXAT10 MOV / 1500 BFXAT10 MOV / 1600 BFXAT10 MOV / 1700 BFXAT10 MOV / 1800 BFXAT10 MOV / 1900 BFX
72788498108115124140150160170180190
Pitch/LengthVersion
Numberof Teeth
AT10 MOV / 2000 BFXAT10 MOV / 2120 BFXAT10 MOV / 2240 BFXAT10 MOV / 2360 BFXAT10 MOV / 2500 BFXAT10 MOV / 2650 BFXAT10 MOV / 2800 BFXAT10 MOV / 3000 BFXAT10 MOV / 3150 BFXAT10 MOV / 3350 BFXAT10 MOV / 3550 BFXAT10 MOV / 3750 BFXAT10 MOV / 4000 BFX
200212224236250265280300315335355375400
Pitch/LengthVersion
Numberof Teeth
AT10 MOV / 4250 BFXAT10 MOV / 4500 BFXAT10 MOV / 4750 BFXAT10 MOV / 5000 BFXAT10 MOV / 5300 BFXAT10 MOV / 5600 BFXAT10 MOV / 6000 BFXAT10 MOV / 6300 BFXAT10 MOV / 6700 BFXAT10 MOV / 7100 BFXAT10 MOV / 7500 BFXAT10 MOV / 8000 BFXAT10 MOV / 9000 BFX
425450475500530560600630670710750800900
AT10move AT10move AT10move
Standard Lengths
7
move-series®
AT10 Pitch Truly Endless “BFX”
AT10move - BFX Tooth Shear Strength (specific belt tooth load bearing)
R.P.M.n [min ]
R.P.M.n [min ]
FUSPEC[N/cm]
M SPEC[Ncm/cm]
PSPEC[W/cm]
FUSPEC[N/cm]
M SPEC[Ncm/cm]
PSPEC[W/cm]
020406080
100200300400500600700800900
1000110012001300140015001600170018001900
200022002400260028003000320034003600380040004500500055006000650070007500800085009000950010000
113.2111.5110.0108.6107.2105.8100.195.691.688.485.582.780.478.276.274.472.771.169.668.266.865.664.463.1
18.0217.7617.5117.2617.0516.8515.9415.2214.6014.0613.6013.1712.8012.4412.1411.8411.5711.3211.0710.8410.6410.4410.2410.06
0.0000.3710.7331.0861.4291.7633.3424.7746.1147.3618.5479.65610.71811.73512.70513.64414.53815.40016.23217.04817.81818.57219.31220.020
62.160.158.256.454.753.151.750.449.147.946.743.941.439.337.335.433.632.030.429.027.626.425.1
9.899.559.268.988.728.478.248.017.817.617.426.996.616.255.935.625.345.084.854.624.404.194.00
20.69822.02223.25424.42425.53326.59627.59728.53629.42930.29231.10832.95634.65036.03637.26838.34639.27040.04040.65641.11841.42641.73441.888
AT10move RPM 0-1900 AT10move RPM 2000-10000
Ordering Example: move-series® Timing Belt[WIDTH] [PITCH] / [LENGTH] [CONSTRUCTION]
50 AT10 MOV / 3750 BFX
Construction
Open-Ended“M”
Tension-memberBelt Width (mm)
32 50 75 10025
AT10move Belt “M” Specifications
AT10-move Tension Member
Specific Stiffness
Belt Mass
7,395 9,135 14,790 22,185 29,580
1.85 - 106 2.28 - 106 3.70 - 106 5.55 - 106 7.40 - 10 6
Dimension
F [N]zul
C [N]spec
[kg/m/cm]
Construction
Open-Ended“M”
Tension-memberBelt Width (mm)
50 75 100 150
AT15move Belt “M” Specifications
AT15move Tension Member
Specific Stiffness
Belt Mass
18,200 27,300 36,400 54,600
4.55 - 106 6.82 - 106 9.10 - 106 13.65 - 106
0.070 kg per meter of belt length per cm of belt width
Dimension
F [N]zul
C [N]spec
[kg/m/cm]
Construction
Truly Endless“BFX”
Tension-memberBelt Width (mm)32 50 75 10025
AT10move Belt “BFX” Specifications
AT10-move Tension Member
Belt Mass
6,750 8,625 13,470 20,200 26,940
Dimension
[kg/m/cm]
F [N]zul
Construction Tension-memberBelt Width (mm)
AT15move Belt “BFX” Specifications
AT15move Tension Member
Belt Mass
Dimension
F [N]zul
[kg/m/cm]
Truly Endless“BFX”
0.173 0.222 0.347 0.520 0.693
0.175 0.221 0.351 0.526 0.701
32 50 75 10025
8,450 11,050 17,550 26,000 35,100
0.237 0.303 0.473 0.710 0.946
8 move-series®
move-series®
AT15 Pitch Open-Ended “M”
Widths (mm)
Specifications
Standard Material
move Tension Member
Belt Color
TPUST1
25 32 50 75 100
Steel
Lengths Any lengths available - Stock Rolls 50 Meters
White / Red
Open-Ended ”M”
Construction
Open-Ended“M”
Tension-memberBelt Width (mm)
32 50 75 10025
AT10move Belt “M” Specifications
AT10-move Tension Member
Specific Stiffness
Belt Mass
7,395 9,135 14,790 22,185 29,580
1.85 - 106 2.28 - 106 3.70 - 106 5.55 - 106 7.40 - 10 6
Dimension
F [N]zul
C [N]spec
[kg/m/cm]
Construction
Open-Ended“M”
Tension-memberBelt Width (mm)
50 75 100 150
AT15move Belt “M” Specifications
AT15move Tension Member
Specific Stiffness
Belt Mass
18,200 27,300 36,400 54,600
4.55 - 106 6.82 - 106 9.10 - 106 13.65 - 106
0.070 kg per meter of belt length per cm of belt width
Dimension
F [N]zul
C [N]spec
[kg/m/cm]
Construction
Truly Endless“BFX”
Tension-memberBelt Width (mm)32 50 75 10025
AT10move Belt “BFX” Specifications
AT10-move Tension Member
Belt Mass
6,750 8,625 13,470 20,200 26,940
Dimension
[kg/m/cm]
F [N]zul
Construction Tension-memberBelt Width (mm)
AT15move Belt “BFX” Specifications
AT15move Tension Member
Belt Mass
Dimension
F [N]zul
[kg/m/cm]
Truly Endless“BFX”
0.173 0.222 0.347 0.520 0.693
0.175 0.221 0.351 0.526 0.701
32 50 75 10025
8,450 11,050 17,550 26,000 35,100
0.237 0.303 0.473 0.710 0.946
Zmin
dmin
Zmin
dmin
Drive w/o back bending
Drive with back bending
Tension MemberConstructionZmin
dmin(mm)
Tension MemberConstructionZmin
dmin(mm)
AT15moveTension Member
AT15moveTension Member
M/BFX20
100
M/BFX25
120
Zmin
dmin
Zmin
dmin
Drive w/o back bending
Drive with back bending
Tension MemberConstructionZmin
dmin(mm)
Tension MemberConstructionZmin
dmin(mm)
AT10moveTension Member
AT10moveTension Member
M/BFX18
60
M/BFX25
120
move-series® Flexibility(minimum tooth count/minimum diameter)
9
move-series®
AT15 Pitch Open-Ended “M”
Ordering Example: move-series® Timing Belt[WIDTH] [PITCH] / [LENGTH] [CONSTRUCTION]
50 AT15 MOV / 3750 M
Spec
ific
Stiff
ness
(10
N)
Belt Stiffness (based on a 50mm wide open-ended belt)
T10 AT10 AT10move ATL10 ATS15 AT20 ATL20
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
6 3.70
5.0
AT15move
4.60
AT15move - M Tooth Shear Strength (specific belt tooth load bearing)
R.P.M.n [min ]
R.P.M.n [min ]
FUSPEC[N/cm]
FUSPEC[N/cm]
020406080100200300400500600700
200022002400260028003000320034003600380040004500
168.0165.2162.7160.3157.9155.8146.5139.0132.8127.4122.6118.4
85.382.079.076.273.671.168.866.664.662.660.756.4
AT15move RPM 0-1900 AT15move RPM 2000-6500
R.P.M.n [min ]
R.P.M.n [min ]
FUSPEC[N/cm]
FUSPEC[N/cm]
800900
1000110012001300140015001600170018001900
5000550060006500
114.6111.1107.9105.0102.299.797.395.092.990.888.987.1
52.549.045.842.8
AT15move - BFX Tooth Shear Strength (specific belt tooth load bearing)
R.P.M.n [min ]
R.P.M.n [min ]
FUSPEC[N/cm]
M SPEC[Ncm/cm]
PSPEC[W/cm]
FUSPEC[N/cm]
M SPEC[Ncm/cm]
PSPEC[W/cm]
0204060801002003004005006007008009001000110012001300140015001600170018001900
2000220024002600280030003200340036003800400045005000550060006500
168.0165.2162.6160.2157.9155.8146.5139.0132.8127.4122.6118.4114.6111.1107.9105.0102.299.797.395.092.990.888.987.1
40.139.438.838.237.737.235.033.231.730.429.328.227.326.525.725.024.423.823.222.722.121.721.220.8
0.0000.8271.6272.4053.1613.8987.332
10.43713.28815.93518.41120.73922.93925.02427.00728.89730.70132.42734.08035.66537.18738.64940.05541.407
85.382.079.076.273.671.168.866.664.662.660.756.452.549.045.842.8
20.319.618.818.217.516.916.415.915.414.914.513.412.511.710.910.2
42.70945.17147.45849.58451.56153.39955.10956.69758.17159.53860.80263.54765.75167.46868.74369.611
AT15move RPM 0-1900 AT15move RPM 2000-10000
10 move-series®
move-series®
AT15 Pitch Truly Endless “BFX”The AT15move is the strongest polyurethane timing belt you can buy. It is specifically designed for heavy-duty high-performance drives and traction drives with a particularly high stiffness requirement. It is also made for linear drive applications where short settling times and high positioning accuracy are a necessity. The specially developed steel cord tension members increase belt stiffness and tear-resistance, making transmission of stronger forces possible. As with AT10move, you can select a narrower timing belt making a more compact drive design possible.
Widths (mm)
Specifications
Standard Material
move Tension Member
Belt Color
TPUST1
25 32 50 75 100
Steel
LengthsStandard lengths listed below.
Additional lengths available up to 30,495mm. In between lengthsavailable starting at a minimum of 1,410mm.
White / Red
Truly Endless “BFX”
19051710
1800 300025052790 4245
15902250
3495
37504005
1500
19953285
499547404500
AT15move Standard Lengths (mm)
670563006705
6000
750070955595
5295
5760
In-between lengths available from 1,400 to 30,500mm
4245
Pitch/LengthVersion
Numberof Teeth
AT15 MOV / 1500 BFXAT15 MOV / 1590 BFXAT15 MOV / 1710 BFXAT15 MOV / 1800 BFXAT15 MOV / 1905 BFXAT15 MOV / 1995 BFXAT15 MOV / 2250 BFXAT15 MOV / 2505 BFXAT15 MOV / 2790 BFX
100106114120127133150167186
Pitch/LengthVersion
Numberof Teeth
AT15 MOV / 3000 BFXAT15 MOV / 3285 BFXAT15 MOV / 3495 BFXAT15 MOV / 3750 BFXAT15 MOV / 4005 BFXAT15 MOV / 4245 BFXAT15 MOV / 4500 BFXAT15 MOV / 4740 BFXAT15 MOV / 4995 BFX
200219233250267283300316333
Pitch/LengthVersion
Numberof Teeth
353373384400420447473500
AT15move AT15move AT15move
AT15 MOV / 5295 BFXAT15 MOV / 5595 BFXAT15 MOV / 5760 BFXAT15 MOV / 6000 BFXAT15 MOV / 6300 BFXAT15 MOV / 6705 BFXAT15 MOV / 7095 BFXAT15 MOV / 7500 BFX
Standard Lengths
11
move-series®
AT15 Pitch Truly Endless “BFX”
AT15move - M Tooth Shear Strength (specific belt tooth load bearing)
R.P.M.n [min ]
R.P.M.n [min ]
FUSPEC[N/cm]
FUSPEC[N/cm]
020406080
100200300400500600700
200022002400260028003000320034003600380040004500
168.0165.2162.7160.3157.9155.8146.5139.0132.8127.4122.6118.4
85.382.079.076.273.671.168.866.664.662.660.756.4
AT15move RPM 0-1900 AT15move RPM 2000-6500
R.P.M.n [min ]
R.P.M.n [min ]
FUSPEC[N/cm]
FUSPEC[N/cm]
8009001000110012001300140015001600170018001900
5000550060006500
114.6111.1107.9105.0102.299.797.395.092.990.888.987.1
52.549.045.842.8
AT15move - BFX Tooth Shear Strength (specific belt tooth load bearing)
R.P.M.n [min ]
R.P.M.n [min ]
FUSPEC[N/cm]
M SPEC[Ncm/cm]
PSPEC[W/cm]
FUSPEC[N/cm]
M SPEC[Ncm/cm]
PSPEC[W/cm]
020406080
100200300400500600700800900
1000110012001300140015001600170018001900
2000220024002600280030003200340036003800400045005000550060006500
168.0165.2162.6160.2157.9155.8146.5139.0132.8127.4122.6118.4114.6111.1107.9105.0102.299.797.395.092.990.888.987.1
40.139.438.838.237.737.235.033.231.730.429.328.227.326.525.725.024.423.823.222.722.121.721.220.8
0.0000.8271.6272.4053.1613.8987.33210.43713.28815.93518.41120.73922.93925.02427.00728.89730.70132.42734.08035.66537.18738.64940.05541.407
85.382.079.076.273.671.168.866.664.662.660.756.452.549.045.842.8
20.319.618.818.217.516.916.415.915.414.914.513.412.511.710.910.2
42.70945.17147.45849.58451.56153.39955.10956.69758.17159.53860.80263.54765.75167.46868.74369.611
AT15move RPM 0-1900 AT15move RPM 2000-10000
Ordering Example: move-series® Timing Belt[WIDTH] [PITCH] / [LENGTH] [CONSTRUCTION]
50 AT10 MOV / 3750 BFX
Construction
Open-Ended“M”
Tension-memberBelt Width (mm)
32 50 75 10025
AT10move Belt “M” Specifications
AT10-move Tension Member
Specific Stiffness
Belt Mass
7,395 9,135 14,790 22,185 29,580
1.85 - 106 2.28 - 106 3.70 - 106 5.55 - 106 7.40 - 10 6
Dimension
F [N]zul
C [N]spec
[kg/m/cm]
Construction
Open-Ended“M”
Tension-memberBelt Width (mm)
50 75 100 150
AT15move Belt “M” Specifications
AT15move Tension Member
Specific Stiffness
Belt Mass
18,200 27,300 36,400 54,600
4.55 - 106 6.82 - 106 9.10 - 106 13.65 - 106
0.070 kg per meter of belt length per cm of belt width
Dimension
F [N]zul
C [N]spec
[kg/m/cm]
Construction
Truly Endless“BFX”
Tension-memberBelt Width (mm)32 50 75 10025
AT10move Belt “BFX” Specifications
AT10-move Tension Member
Belt Mass
6,750 8,625 13,470 20,200 26,940
Dimension
[kg/m/cm]
F [N]zul
Construction Tension-memberBelt Width (mm)
AT15move Belt “BFX” Specifications
AT15move Tension Member
Belt Mass
Dimension
F [N]zul
[kg/m/cm]
Truly Endless“BFX”
0.173 0.222 0.347 0.520 0.693
0.175 0.221 0.351 0.526 0.701
32 50 75 10025
8,450 11,050 17,550 26,000 35,100
0.237 0.303 0.473 0.710 0.946
12 move-series®
222 Industrial Way West Eatontown, NJ 07724
Tel: 732-460-9500 Fax: 732-542-6725
www.brecoflex.com e-mail: [email protected]
Contact U s
Copyright 2019 BRECOflex CO., L.L.C. • BRECO®, BRECOFLEX® & ATN® are registered trademarks of BRECO Antriebstechnik GmbH • ARC-POWER® is a registered trademark of BRECOflex CO., L.L.C. • Kevlar® is a registered trademark of DuPont Patents Pending • ESBAND® is a registered trademark of Max Schlatterer GmbH & Co. KH Patents Pending. Specifications are subject to change without prior notice.
All recommendations for the use of the products described herein and all other data or information set forth in this publication, whether concerning such products or otherwise, are furnished without any guarantee, warranty representations or inducement of any kind whether expressed or implied, including but not limited to warranties of merchantability and fitness for a particular purpose. BRECOflex CO., L.L.C. expressly disclaims liability under any theory, including without limitation, contract negligence, misrepresentation or breach of any obligation relating to the recommendation, data or information set forth herein. Readers and customers are encouraged to conduct their own test before using any product. Read its label and all related instructions. BRECOflex CO., L.L.C. reserves the right to make changes in the technical and dimensional specifications of its products without prior notice. Responsibility for expenses incurred as a result of product changes or discontinuance of a product lies solely with the purchaser.
Prin
ted:
09/
19Regional Sales Offices:Atlanta (770) 317-8745 Dallas (214) 476-5650 Miami (770) 317-8745 Richmond (804) 387-5760Bay Area (661) 713-0121 Denver (303) 470-7226 Milwaukee (908) 461-6995 Seattle (503) 781-3631 Baltimore (804) 387-5760 Detroit (908) 433-0036 Minneapolis (908) 461-6973 Salt Lake City (303) 470-7226Boston (603) 496-5833 Ft. Wayne (908) 461-1168 Nashville (732) 757-6647 San Antonio (214) 476-5650 Buffalo (412) 600-5632 Grand Rapids (908) 461-1168 New York (732) 829-7773 Toledo (908) 433-0036Charlotte (908) 461-3937 Houston (214) 476-5650 Philadelphia (732) 829-7773 Toronto (416) 476-7107Chicago (908) 461-6995 Indianapolis (908) 461-2344 Phoenix (480) 961-3846 Mexico City +52 1 55 45335835Cincinnati (908) 461-2344 Las Vegas (480) 961-3846 Portland (503) 781-3631 Monterrey +52 1 55 40840778Cleveland (412) 600-5632 Los Angeles (661) 713-0121 Pittsburgh (412) 600-5632 Guadalajara +52 1 55 40949053
SO 9001 CERTIFIED COMPANY