motorola-solutions.selftestengine.msc-321.v2015-05-18.by.naomi · 18-05-2015 · your client...

SelfTestEngine.MSC-321.91q

Number: MSC-321Passing Score: 800Time Limit: 120 minFile Version: 4.7

http://www.gratisexam.com/

MSC-321

Designing and Deploying Advanced Data Capture (ADC) Solution

i) Dump is still valid. Passed today in Russia with 88%... I think some answers are updated, and forpreparation this dump is good.ii) I wanted to thank this Great VCE file for helping me to achieve success in test.iii) It will be awesome for you if you will use this for your study for the exam. iv) All the questions sort out properly and have obvious answers.v) It contains 100% Real Questions.Prepare yourself to Face the Exam with Real Exam Questions fromPrevious Exams, walk into the Testing Center with confidence.

Exam A

QUESTION 1You will be creating a customer proposal and Motorola Solutions has invested in a number of tools to assistyou in this process. Some of the tools include rebranding support to increase the professionalism of yourfinal documentation. Which of the following items is NOT typically provided by Motorola Solutions forinclusion in your proposal?

A. Programming Scanner SheetsB. Device Management OptionsC. Spare Cables and scanner pricingD. Third-Party application integrationE. Service and maintenance options

Correct Answer: DSection: (none)Explanation

Explanation/Reference:

QUESTION 2Your customer is having an issue with bar code quality. Their application currently accepts packages frommultiple suppliers. The bar codes are all 8 characters or less and can be any one of three symbologies;Code 39, code 128 or I 2 of 5, After doing some research you notice that the only bar codes you are havingissues reading are coming from the supplier that is using I 2 of 5 labels. These labels are often smudgedand of poor print quality. The users need to perform their job as fast as possible as the packages do arrivein large quantities at different times during the work day. You inspect the configuration and see that thescanner redundancy level has not been set for any bar codes so you think increasing the scannersredundancy level may assist in ensuring proper decode of the troubled labels, You are concerned that youmay affect the scanners performance and want to keep the scanner as aggressive as possible but need toensure the I 2 of 5 bar codes are read successfully during the process.

Knowing that the redundancy level is not set, to what Redundancy Level do you want to change thescanner configuration to BEST meet the above requirements?

Please use the Reference Guide exhibit at the bottom.

A. Redundancy Level 1B. Redundancy Level 2C. Redundancy Level 3D. Redundancy Level 4

Correct Answer: ASection: (none)Explanation


QUESTION 3You are in the process of testing the Advanced Data Formatting (ADF) rules you used to program yourscanner before starting your pilot. Your ADF rule was defined as:

Step Bar Code1 Begin New Rule2 Code 1283 Send next 5 characters4 Send <CTRLM>5 Send <CTRL D>6 Save Rule

You now want to run a scan test and scan the following three bar codes:

Code 39 bar code 245671243170Code 128 bar code 1234567S9011Code 39 bar code 382938470012

Which of the following strings will be sent to the host application?

A. 245671243170 123456789011 <CTRL M><CTRL D> 382938470012B. 24567 <CTRL M><CTRL D> 123456789011 38293 <CTRL M><CTRL D>C. 245671243170 12345<CTRL M><CTRL D> 382938470012D. 24567 12345<CTRL M><CTRLD> 38293

Correct Answer: CSection: (none)Explanation


QUESTION 4In preparation for a successful pilot you will need to parse the scanned data and insert a TAB characterafter every comma. Which of the documents would contain information that could be used to assist you indefining what you need to do to program your scanners for the pilot?

A. Advanced Data Formatting Programmers GuideB. Quick Start GuideC. eMscript Application Users GuideD. Mobility Services Platform (MSP) Users Guide



QUESTION 5One of your customers is working on an application for their Motorola Solutions MT2070 Mobile Terminalsand they are having problems decoding barcodes. The customer is not sure if the problem is theirapplication or if the scanner is broken. Which of the following would you suggest to start troubleshootingthis situation?


A. Ask the customer to request assistance from a qualified application programmerB. Ask the customer to open a service trouble ticket with Motorola Solutions repair centerC. Suggest the customer test the scanner by using the default MCL "scan item" application that is

accessed from the MT's home menu.D. Have the customer check the WiFi settings on the Mt's radio interface



QUESTION 6Your client notices that when using a presentation scanner the scanner scans and decodes a bar codethen appears to scan and decode the same barcode again causing application issues on the host system.Which of the following items should be checked?

A. The scanner setting for Timeout between Decodes, Same SymbolB. The scanner setting for Timeout between Decodes, Different SymbolC. The scanner setting for Decode Redundancy LevelD. The enabled decode types on the scanner



QUESTION 7What two Mobility Services Platform (MSP) components are required in order to manage hand heldscanners?

A. Scanner Proxy Plug-in and Remote ControlB. Data Collection and Scanner Proxy Plug-inC. Scanner Proxy Plug-in and AppCenterD. Windows PC Client and the Scanner Proxy Plug-in



QUESTION 8Your client notices that when they scan a bar code the scanner beeps four long low beeps. Whatinstructions should you give your customer to assist in troubleshooting this issue?

A. Instruct the customer that the scanner should reset to defaults and try again.B. Instruct the customer that they need to disable the host interface using the programming guide.C. Instruct the customer that they may need to use the programming guide and change the "timebetween

beeps" parameter.D. Instruct the customer that the correct host type might not be enabled and that they should use the

programming guide to enable it.



QUESTION 9Which of the following is NOT available through Motorola Solutions eMscript application?

A. Historical memory utilizationB. WLAN Signal Strength

C. Remote ControlD. Active Process Count



QUESTION 10A customer has identified the need to capture images of A$ size paper documents. He requires resolutionover 100 DPI, Which of the following products can address this customer need?

A. DS3578B. DS4208C. DS9208D. DS9808E. DS6707F. D56878

Correct Answer: ESection: (none)Explanation


QUESTION 11You are discussing some of the mechanics of different scanner devices with a customer. Which of thefollowing device types uses a single spot of light that quickly moves back and forth to scan a barcode?

A. Linear ImagerB. Laser ScannerC. Area ImagerD. Contact Scanner

Correct Answer: BSection: (none)Explanation


QUESTION 12Which of the following bar code types is readable by a 1D scanner?

A. MaxicodeB. Data matrixC. QR CodeD. Interleaved 2 of 5



QUESTION 13Which of the following bar codes is NOT considered two dimensional bar code?

A. Code 39B. PDF 417C. QR CodeD. Data matrix



QUESTION 14Which of the following communication interfaces CANNOT be used by an application to senddata/scannercommands bi-directionally?

A. USB SNAPIB. RS-232SSIC. USBD. OPOSE. Keyboard Wedge



QUESTION 15The ability of a scanner to decode a barcode even when there is relative motion between the barcode andthe scanner is called:

A. Ambient light immunityB. Aiming patternC. Omni-directionalityD. Motion Tolerance



QUESTION 16You have a Request for Proposal for a customer that will be receiving cars in a car rental location,customer wants to read the car's VIN barcode, take an image of the license plate and record customerspecific information. The customer is price sensitive and they don't want to buy a mobile computer. Whichof the following items would you recommend for this customer?

A. LS300SB. LS920SiC. MK500 touch screenD. MT2090 with 2D imager



QUESTION 17Your customer wishes to decode the three types of bar codes from the image below.

Bar codes of this type are typically used on which of the following items?

A. ProduceB. Postal ItemsC. Clothes and other Retail itemsD. Overnight package trackingE. Vehicles for toll collection



QUESTION 18You have a government customer that just opened a bid in Latin America for a company with 1,000convenience stores located in small cities across Mexico and EI Salvador. The customer requires thesupport of both 1 and 2D scanning with the same device and a minimum of 2 per store. The customer isprice sensitive. Which of the following scanner combinations would you recommend?

A. LS1203 - CordedB. LS2208 - CordedC. LS4208 - CordedD. LS4278 - CordlessE. DS4208 - CordedF. DS6707-SR - CordedG. DS6878-SR-CordlessH. DS9808-SR - Corded



QUESTION 19Data Matrix bar codes are typically found on which of the following items?

A. BooksB. Printed Circuit Boards (PCB)

C. Package SortingD. Fruits and Vegetables



QUESTION 20Which of the following devices uses many rows of pixels to help it decode poorly printed or damagedbarcodes?




QUESTION 21Which of the following scanning technologies can read both 1D and 2D bar codes on mobilephonedisplays?

A. Any type of scanner. They all read the barcodesB. Linear Imager - based scannersC. Laser -based scannersD. Area Imager-based scanners



QUESTION 22Which of the following scanner product portfolios would include the types of products that would be usedfor data collection in a Warehouse or Manufacturing environment?

A. Retail ProductsB. Consumer ProductsC. Rugged ProductsD. OEM Products



QUESTION 23The MK3000 series would be the best choice for a customer with which of the following needs:

A. Increasing user productivity at the point-of-saleB. Ability to read DPM codes on surgical equipmentC. Improving customer service through the use of rich self-service scanning applicationsD. Increasing turns within the warehouse by automating item selection using a large screen device



QUESTION 24To support remote scanner management through the Scanner Management Service, which interfaceisREQUIRED?

A. OCIAB. USB ConnectionC. RS-232 ConnectionD. Programming bar codes



QUESTION 25The Motorola Scanner Software Developer's Kit (SDK) can help a developer build applications that havecomplete control over a scanner's capabilities. Which of the following items is supported by the MotorolaSolutions SDK?

A. Transmit bar code dataB. Control LEDs and BeeperC. Capture ImageD. Query asset informationE. A and B onlyF. C and D onlyG. All of the above

Correct Answer: GSection: (none)Explanation


QUESTION 26You have been asked to acquire the 123Scan2 configuration utility for a new deployment. How would yougo about acquiring this utility?

A. Download the utility at http://www.motorolasolutions.com/123ScanB. Request the utilitythrough http://businessonline.motorola.comC. Call Motorola Solutions Pre Sales Supportand place an order.D. Call the 123Scan2Help Desk.

Correct Answer: A

Section: (none)Explanation


QUESTION 27Which of the following Motorola Solutions tools can you use to assist you in reducing installation costs foryour scanner deployment?

A. Solution BuilderB. ScanVisorC. 123Scan2Programming UtilityD. Scanner at a Glance Brochure



QUESTION 28Included in each of the Motorola Solutions Scanner Product Reference Guides are barcodes that can bescanned to define the USB Country Keyboard type. Which of the following issues is often corrected byensuring the proper USB Country Keyboard type is set in the scanner?

A. Host application is missing charactersB. Host application is not receiving any scanner dataC. Host application is displaying the wrong charactersD. Host application is showing duplicate scanner decodes



QUESTION 29Which of the following requirements would NOT mandate a 2D scanning technology?

A. Ability to read 2D bar codes.B. Ability to read a bar code by passing it in front of a scanner without aligning the barcode with the

decode window.C. Ability to read a moving bar code.D. Ability to capture images.



QUESTION 30A distribution center is looking for a handheld scanner that can scan 2D barcodes up to 30 feet away.Which of the following products would BEST fit this application?


A. DS3508-ERB. DS4208C. LS3578-ERD. LS2208



QUESTION 31Which of the following products would be considered Long Range scanners and can read bar codeswithout getting off a typical forklift truck?

A. LS 3508 FZ & DS3508B. LS4208 St DS4208C. LS3408ER & DS3508ERD. LS9208 & DS9208



QUESTION 32What does the IP 65 Rating on an Industrial Scanned mean?

A. The scanner has a 65 inch drop specificationB. The scanner works best in 65 degree Fahrenheit environmentsC. The scanner is protected against windblown dust and rainD. The scanner is protected against being submersed in water



QUESTION 33Your customer is planning to open 10 new convenience stores in a single metro area. Which of thefollowing product combinations would you recommend for use at the Point of Sale for their ConvenienceStores?

A. DS9808& LS770S & DS9208B. LS3578 & DS3578 & DS3508

C. CS3000 & CS1504 & LS4208D. LS1203 & CS3000 & LS3508DP



QUESTION 34Which of the following physical host connectors provides the MOST flexibility when evaluating connectivityoptions?

A. Keyboard WedgeB. IrDAC. RS232D. USB



QUESTION 35What are two classification types of imaging data ejection technologies?

A. LED and LCDB. CCD and CMOSC. In-Counter and Fixed MountD. Retrocollective and non-retrocollective



QUESTION 36You have identified that the customer requires a rugged scanner because it will be used in a harshdistribution center. What other questions would you ask to further refine the scanner decode technologyselection (selectTHREE)?

A. At what distance will you be reading bar codes?B. Will the bar codes be moving while attempting to read?C. Is there an 802.11n wireless LAN in use?D. Do you plan on performing your own maintenance on the scanners?E. What types of bar codes will you be scanning?

Correct Answer: ABESection: (none)Explanation


QUESTION 37

Your customer needs a device with integrated 802.11 a/b/g for real-time application connectivity in thewarehouse. Which of the following scanners would be the BEST choice for your customer?

A. DS3578B. MT2090C. CS3070D. LI4278



QUESTION 38Your solution requires a number of users to be able to scan items into a single host application via a singlehost connection. Motorola scanners can support this requirement through the use of which of the followingitems?

A. Setting all scanners to SPP MasterB. Setting all scanners to HID Slave ModeC. Using multiple scanners in multi-point mode to a single cradle connected to the host deviceD. Add multiple keyboards to the host computerE. Enable Ad-Hoc mode on the host computer's Bluetooth interface



QUESTION 39Which of the following items is supported on a USB HID Keyboard connection?

A. Data CaptureB. Image CaptureC. Remote Scanner ManagementD. Optical Character Recognition



QUESTION 40Which of the following host interfaces requires the barcode symbology be included in the decodeddatamessage?

A. Standard RS-232B. USB IBM HandheldC. USB HID KeyboardD. Keyboard Wedge

Correct Answer: BSection: (none)

Explanation


QUESTION 41You are discussing the application requirements with your customer and they inform you that they wouldlike the host system to be able to control when their DS6707 scanner is enabled within their POSapplication. The DS6707 supports a number of RS232 modes. Which of the following RS232 modes allowthe host POS to enable and disable the laser beam on a scanner? Please use the RS-232 exhibit below.

A. ICLB. FujitsuC. Wincor-Nixdorf Mode AD. Wincor-Nixdorf Mode B/OPOS/JPOSE. OlivettiF. OmronG. CUTE



QUESTION 42When a scanner is set up as a Bluetooth Serial Port Profile (SPP) Master, this means:

A. The scanner can only be paired to another SPP Master deviceB. The scanner is configured to only communicate to an SPP cradleC. Communication can be initiated by any Bluetooth client at any timeD. The scanner will only pair when the remote device address is part of the connection request



QUESTION 43On an RS232 host cable, which of the following signal line definitions is used to carry the data fromthescanner to the host?

A. DTRB. GNDC. TXDD. RXD



QUESTION 44When you connect a scanner to a host system for the first time with a USB cable, what defines the defaulthost protocol that the scanner will use to attempt to communicate with the host?

A. All scanners default to a Standard RS-232 host interfaceB. All scanners default to USB HID Keyboard emulationC. The type of scanner cable connected defines the default communication protocol that a scanner will

useD. Scanners do not default to any host protocol: the user is required to scan the Host Protocol bar code

from the Quick Reference Guide



QUESTION 45Your customer is planning to implement a mobile couponing application that will use QR codes and wouldlike to use a low cost scanner. Which of the following scanner options would you recommend?

A. DS4208B. LI4278C. DS6878D. LS2208



QUESTION 46You have just generated an Inventory Report within 123Scan2. What asset tracking information isavailable?

A. Serial numberB. Manufacture dateC. Configuration nameD. All of the above



QUESTION 47Which of the following would be a reason a Cordless Scanning solution requires a Scanner Cable?

A. As a back-up in case the cordless radio breaksB. To connect the Cradle to the HostC. To physically secure the scanner to the counterD. To charge the scanner



QUESTION 48Where would you go to download 123Scan2?

A. www.motorola.com/123ScanB. www.scansource.com/123ScanC. www.motorolasolutions.com/123ScanD. www.motorolasolutions.com/symbol123Scan



QUESTION 49123Scan2 is an important tool that includes a wizadtool to guide users through a streamlined scanner set-up process. Once parameters are correctly tested and set, a user can perform all of the following optionsEXCEPT:

A. Distribute the saved configuration via emailB. Electronically download it via a USB or RS-232 cable to a scannerC. Generate a sheet of programming bar codes that can be scanned by a scannerD. Create a custom EPROM for duplication at the factory



QUESTION 50Your customer is looking for options that include remote scanner management. What are theprimaryinterfaces that enable two-way communication (select TWO)?

A. USB CDCB. USBOPOSC. USB SNAPID. USB HID Keyboard

Correct Answer: BCSection: (none)Explanation


QUESTION 51Why would you use the image optimization screen on 123Scan2?

A. To test image capture settingsB. To change the beeper volumeC. To enable the MicroPDF-417 symbologyD. To verify the output of an ADF rule



QUESTION 52The Motorola OPOS Driver enables bar codes data communication between scanners and anOPOScompliant Point of Sale application through which of the following connection types (select TWO)?

A. Universal Serial Bus (USB)B. RS-232C. IrDAD. Ethernet

Correct Answer: ABSection: (none)Explanation


QUESTION 53When creating a budgetary proposal for your customer it is a good idea to "bundle" the scanners and otheritems as a kit. Which of the following is NOT typically a reason to ship scanners in a kit?

A. A kit keeps the "system components" together for shipping and installation.B. A kit can be easily priced as one item instead of multiple items,C. A kit can includeall cables and power supplies.D. A kit can be programmed at the factory.



QUESTION 54A specialty apparel retailer is looking for a new scanner to connect to their Point Of Sale system. However,they are concerned about limited counter space and would like a scanner with a small footprint. Which ofthe following would BEST fit their need?

A. LS2208B. DS457C. DS3578-SRD. DS6878-HC



QUESTION 55You would like to recommend a hands free scanner over a hand held scanner. You will make thisrecommendation when the customer:

A. is concerned about limited counter space,B. intends to bring the bar code to the device,C. has a mobile coupon program.D. is using a scanner that will be used in a hospital setting.



QUESTION 56Most Point of Sale systems that use an RS232 Host cable often use what additional accessory?

A. External Power SupplyB. Long Life BatteriesC. Hands-free StandD. Wall mount adapter



QUESTION 57Your retail customer is launching a gift registry application in their bridal department. Which product wouldyou recommend for use as the portable scanner in this application?

A. MT2090B. LS4278C. DS3578D. LS2208



QUESTION 58You are designing a new ADC system that will include image scanners and are identifying thedifferentsoftware drivers that will need to be installed. Which of the following Motorola Solutions software drivers iscapable of transmitting bar code data, pictures, and video?

A. SSIB. SNAPIC. CDCD. WMI



QUESTION 59You are helping an existing customer set up her ADC system so that her scanners capture imageseffectively. Which of the following interfaces would support image capture?

A. HID KeyboardB. IBM Handheld/ USB OPOSC. SNAPID. Simple COM emulation



QUESTION 60Which of the following scanner parameters can be configured from the 123Scan2 Image Optimizationscreen?


A. JPEG Target File SizeB. Configuration nameC. Beeper ToneD. USB Communication mode



QUESTION 61You are discussing the advantages of Motorola Solutions scanners with your customer and want topointout all of the application languages that are supported by the Software Developer's Kit. Which of thefollowing applications development languages are supported by Motorola Solutions Scanner SDK(selectTHREE)?

A. HTML5B. JAVAC. Microsoft .NETD. Microsoft C++E. PascalF. PerlG. Ruby

Correct Answer: BCDSection: (none)Explanation


QUESTION 62When configuring your Digital Scanner to a Decode Redundancy Level 2 you are actually informing thescanner to do which of the following?

A. Scan each bar code from two different anglesB. Scan and decode each bar code two timesC. Double the scanner aggressiveness from the defaultD. Transmit the decoded information twice to the host application



QUESTION 63During the proposal process you will be asked to provide a quote for scanner spares. In order to providethis you will need to know which of the following items (select TWO)?

A. Total number of sitesB. Scanner Help Desk informationC. Types of barcodes being scannedD. Any Advanced Data Formatting RulesE. Number of scanners deployed at each site

Correct Answer: AESection: (none)Explanation


QUESTION 64Which of the following Motorola Solutions tools will help you create the final pricing for your customerproposal?

A. 123Scan2B. ScanVisorC. SolutionBuilderD. Scanner at a Glance Guide



QUESTION 65You are working on gathering the Environmental Requirements from the customer. Which of the following

would NOT be considered an Environmental parameter?

A. Symbology typeB. Scanning DistanceC. Scanner Sealing SpecificationD. Drop Specification requirement



QUESTION 66Which of the following Motorola Solutions tools can you use to assist you in reducing installation costs foryour scanner deployment?

A. Solution BuilderB. ScanVisorC. 123Scan2Programming UtilityD. Scanner at a Glance Brochure



QUESTION 67Motorola scanners can be programmed using Advanced Data Formatting rules. What is the primarypurpose of Advanced Data Formatting?

A. decoding poorly printed barcodesB. ensuring all data is not case sensitiveC. customizing data before transmission to the host deviceD. scanning bar codes longer than 60 characters



QUESTION 68Motorola Solutions scanners all have a service/maintenance option available for inclusion with yourproposal. These scanner service options protect the customer's investment and help reduce the Total Costof Ownership. What is this service option from Motorola Solutions called?

A. Warranty SupportB. Quick ServiceC. Partner Ready ServicesD. Service From the StartE. Advanced Exchange Service

Correct Answer: DSection: (none)

Explanation


QUESTION 69You will be using Advanced Data Formatting (ADF) Wiles as a means of customizing data beforetransmission to the host application. You determine the ADF rules as follows:

You program the scanner correctly and now scan a Code 39 bar code of 1299X1559828. Which of thefollowing strings would be sent by the scanner to the host application?

A. 1299X1559828B. 1299X<space>C. 00001299 <space>D. 000000001299X1559828E. 15598280<space>



QUESTION 70When planning for a scanner pilot deployment, which of the following contain bar codes that can be used toperform basic scanner configuration at the end user site (select TWO)?

A. Product Reference GuideB. Regulatory GuideC. Quick Start GuideD. Advanced Data Formatting Programmers Guide

Correct Answer: ACSection: (none)Explanation


QUESTION 71During a customer pilot you notice that the performance of your fixed reader has decreased over time.Which of the following are potential issues that would cause a reader's performance to decrease from theoriginal installation (select TWO)?

A. Poor or diminishing print qualityB. The X Dimension of the bar code is too small for the readerC. The exit window of the reader is too small for the read distanceD. The exit window of the reader is dirty

Correct Answer: AD

Section: (none)Explanation


QUESTION 72Packages and items being scanned sometimes have multiple bar codes printed in close proximity. This cancreate situations where a user may not be able to identify which bar code was actually scanned anddecoded. One feature of Motorola Solutions Digital Scanners is to only decode bar codes that are directlyaligned under the laser cross hair. Which of the following User Preference Parameters can be used toenable this feature?

A. Decode Aiming PatternB. Power ModeC. Picklist ModeD. Trigger Mode



QUESTION 73Motorola's Digital scanners support a configuration feature called Power Mode (Parameter # 80h). Powermode supports two settings: Continuous on and Reduce Power Mode, When Power Mode is set toReduced Power Mode the scanner:

A. Waits for a command from the host before scanning.B. Waits 1 second after the trigger is pulled to ensurethe operator is ready to scan.C. The scanner goes into low power mode after a specified period of time to save power.D. The scanner does not project an aiming pattern to save power?



QUESTION 74You are using the Image Optimization screen on 123Scan2. What is the purpose of using this screen?

A. To test image capture settings.B. To change the beeper volume.C. To enable the MicroPDF-417 symbology.D. To verify the output of an ADF rule.



QUESTION 75As a project manager for your customer's Advance Data Capture (ADC) design and deployment project,which of the following are critical elements of the pilot phase that may be used to evaluate user acceptance

(select TWO)?

A. Hardware and Software requirementsB. Service from the Start optionsC. Scanner Power ConsumptionD. Scanner performanceE. User ergonomics

Correct Answer: DESection: (none)Explanation


QUESTION 76What is the primary audience for your completed data collection project?

A. Pre-sales teamB. Advanced Services teamC. Site Survey teamD. Deployment team



QUESTION 77Your client has several barcodes that are grouped together on a package and when the user scans abarcode the scanner may decode the wrong barcode. Which of the following features would assist the userin selecting the proper bar code and ensuring that the correct bar code is being scanned?

A. Trigger ModeB. Picklist ModeC. Redundancy ModeD. Decode Mirror ImagesE. Beep After Good Decode



QUESTION 78Your client notices that the new scanners they are deploying are not configured correctly. The existing hostapplication requires that the scanner send an enter key after transmitting the scanned data. Which of thefollowing should the customer perform?

A. Instruct the customer that the scanner can be programmed to append an enter key byscanning thefollowing configuration barcodes (That are included in the Quick Start Guide) in the following order:1)scan options2) data suffix3) enter

B. Instruct the customer that the scanner can be programmed to append an enter key byscanning thefollowing configuration barcodes (That are included in the Quick Start Guide) in any order: scan options,data suffix and enter barcodes

C. Instruct the customer that all scanners need to be programmed at the factory before shipping and thatthey should return them to Motorola Solutions for programming.

D. Instruct the customer that scanners can only be programmed to send prefixes and that suffixes need tobe included in the data that is printed on the barcode



QUESTION 79Which of the following tools can be used to capture device historical performance data from aMT20x0scanner?

A. eMsriptB. Remote ControlC. AppCenterD. AirBeam



QUESTION 80Which of the following scanning technologies offers an omni-directional scanning capability for 2Dbarcodes?




QUESTION 81Which of the following best describes what the mil-size dimension of a 1D bar code means?

A. Overall height of the bar codeB. Overall length of the bar codeC. The number of digits encoded in the bar codeD. The width (or X dimension) of the smallest bar in the bar code



QUESTION 82

Which of the following statements about UPCA barcodes is INCORRECT?

A. UPCA codes are 12 characters.B. UPCA codes can be alphanumeric.C. UPCA standards only allow printingat 100% of the specified height.D. UPCA and EAN13are considered equivalent codes.



QUESTION 83Your customer requires a scanning solution that will enable the operator to move objects over a singlelocation that can be used to scan the items. What type of scanning environment would this be considered?

A. HandheldB. FixedC. CombinationD. WirelessE. Mobile



QUESTION 84In order to provide the best solutions for your customer's scanning application you will need to understandthe Decode Zone of the potential scanners that you will be evaluating. The Decode Zone defines theworking range of the scanner. Which of the following items are variables in determining the Decode Zoneof a linear scanner (select THREE)?

A. The length of the barcodeB. The bar code's X DimensionC. The length of the host cableD. The bar code's Y DimensionE. The distance of the bar code from the scannerF. The type of characters being scanned (numeric or alpha)

Correct Answer: ABESection: (none)Explanation


QUESTION 85What type of bar code is most often found on FoodProducts?

A. Code 39B. Data MatrixC. PDFD. UPC



QUESTION 86Which of the following is considered a benefit of omni-directional scanning?

A. Improved productivity and user comfortB. Reduced configuration costsC. Easily migrating to new hostsD. Protection against spills and drops



QUESTION 87Which of the following orientations describes the decoding pattern of a 2D imager?

A. MonopoleB. Multi-focusC. UnidirectionalD. Omnidirectional



QUESTION 88A third party logistics company in Asia has 10 distribution centers in Korea and 10 distribution centers inSingapore, The customer has forklift mounted Motorola Solutions vehicle computers and requires ascanner technology for use with the computers. They want to occasionally scan without leaving the forkliftsas well as stepping off the forklifts and scanning items close to the forklift. They customer currently onlyhas ID barcodes. What is the best solution for this customer?

A. LS300SB. LS920SC. LS340SD. DS3508-DP



QUESTION 89Which of the following scanning technologies is required to read both two dimensional and one dimensionalbarcodes interchangeably?

A. Laser ScannerB. Linear ImagerC. Area ImagerD. CCD Imager



QUESTION 90A customer really wants to use a laser-based scanning solution. Which of the following bar code types isNOT readable with a laser-based scanner?

A. Code 39B. Data matrixC. Interleaved 2 of 5D. UPCA



QUESTION 91Which of the following scanners would be the BEST Recommendation for a disinfectant ready, cordedhealthcare solution?

A. DS3578-SRB. DS6878-HCC. DS4208-HCD. CS3070




motorola-solutions.selftestengine.msc-321.v2015-05-18.by.naomi · 18-05-2015 · your client...

Documents