motorcycle helmet safety ppt
TRANSCRIPT
![Page 1: Motorcycle Helmet Safety PPT](https://reader038.vdocuments.us/reader038/viewer/2022102704/5451b151b1af9f83068b4c38/html5/thumbnails/1.jpg)
Motorcycle Helmet SafetyMotorcycle Helmet Safety
FWA GARRISON
SAFETY OFFICE
![Page 2: Motorcycle Helmet Safety PPT](https://reader038.vdocuments.us/reader038/viewer/2022102704/5451b151b1af9f83068b4c38/html5/thumbnails/2.jpg)
The chopper-style “Novelty” helmet provide little to no protection to the skull and face.
If you are not wearing a DOT or Snell approved helmet!
Crash!!
![Page 3: Motorcycle Helmet Safety PPT](https://reader038.vdocuments.us/reader038/viewer/2022102704/5451b151b1af9f83068b4c38/html5/thumbnails/3.jpg)
Motorcycle Helmets
The leading cause of serious injury/fatalities
in motorcycle accidents is Not wearing a
Helmet or wearing an improper one.
The ONLY authorized helmet for Army Motorcycle
Operator / passenger is one approved by DOT/Snell.
In most cases, the only way to tell the difference
between a novelty helmet and a DOT certified helmet
is a visual/hands-on inspection.
![Page 4: Motorcycle Helmet Safety PPT](https://reader038.vdocuments.us/reader038/viewer/2022102704/5451b151b1af9f83068b4c38/html5/thumbnails/4.jpg)
Full Face Shield is PREFERRED----
over the Shell style helmet.
Examples of ApprovedMotorcycle Safety Helmets
![Page 5: Motorcycle Helmet Safety PPT](https://reader038.vdocuments.us/reader038/viewer/2022102704/5451b151b1af9f83068b4c38/html5/thumbnails/5.jpg)
RIGHTApproved Helmet
Helmet thickness is indication of
amount of padding
![Page 6: Motorcycle Helmet Safety PPT](https://reader038.vdocuments.us/reader038/viewer/2022102704/5451b151b1af9f83068b4c38/html5/thumbnails/6.jpg)
WRONGNovelty Helmet
Helmet thickness is indication of
amount of padding
No Sunglasses
![Page 7: Motorcycle Helmet Safety PPT](https://reader038.vdocuments.us/reader038/viewer/2022102704/5451b151b1af9f83068b4c38/html5/thumbnails/7.jpg)
RIGHTApproved Helmet
WRONGNovelty Helmet
Note the overall width/thickness of helmet on left, 1in. Heavy foam padding all around and at the top of helmet. Helmet on right much thinner w/half in. light foam padding all around & top.
![Page 8: Motorcycle Helmet Safety PPT](https://reader038.vdocuments.us/reader038/viewer/2022102704/5451b151b1af9f83068b4c38/html5/thumbnails/8.jpg)
RIGHTApproved Helmet
WRONGNovelty Helmet
Proper straps and attachments.Multiple attachment points
Improper straps and attachments.Single attachment points
![Page 9: Motorcycle Helmet Safety PPT](https://reader038.vdocuments.us/reader038/viewer/2022102704/5451b151b1af9f83068b4c38/html5/thumbnails/9.jpg)
SHELL CONSTRUCTED OF FIBERGLASS AND POLYESTER RESINLINER CONSTRUCTED OF EXPANDED POLYSTYRENE
NO HELMET CAN PROTECT THE WEARER AGAINST ALL FOERSEEABLE IMPACTS, HOWEVER, FOR MAXIMUM PROTECTION, THE HELMET MUST BE OF GOOD FIT AND THE RETENTION SYSTEM MUST BE SECURELY FASTENED TO RETAIN THE HELMET. THE HELMET, WHEN FITTED AND
FASTENED, SHALL NOT BE REMOVED EASILY.HELMET CAN BE SERIOUSLY DAMAGED BY SOME COMMON SUBSTANCES WITHOUT DAMAGE BEING VISIBLE TO THE USER, APPLY ONLY NEUTRAL DETERGENT AND WATER FOR CLEANING PURPOSE MAKE NO MODIFICATION.IF HELMET EXPERIENCES A SEVERE BLOW, RETURN IT TO THE MANUFACTURER FOR INSPECTION OR DESTROY IT AND REPLACE IT.
SHOEI• [ W-3 ] MADE IN JAPAN
WARNING!MAY 26 1998 WARNING:
These helmets do not meet Department of Transportation specifications. They are not to
be used on any motorized vehicles. They are not
designed to be a safety helmet and do not protect your head
on impact.
RIGHTApproved Helmets
WRONGNovelty Helmets
![Page 10: Motorcycle Helmet Safety PPT](https://reader038.vdocuments.us/reader038/viewer/2022102704/5451b151b1af9f83068b4c38/html5/thumbnails/10.jpg)
LOOK FOR The DOT Approved Sticker. Normally located on back of helmet, on the outside of helmet.
![Page 11: Motorcycle Helmet Safety PPT](https://reader038.vdocuments.us/reader038/viewer/2022102704/5451b151b1af9f83068b4c38/html5/thumbnails/11.jpg)
FWA GARRISON
SAFETY OFFICE
BE SAFE