motor sensors

7/30/2019 Motor Sensors

1/82

ISO 9001: 2008 Certifed

Motor / Generator Sensor Product Guide

Stator

Bearing

Exlosion proof

Surface Mount

Heaters

Embedment

NEW!

RATED

SENSOR

S

CUS

APPROV

ED


2/82

Your partner for quality temperature sensors

Count on RTD Company to deliver the highest-quality products, engineering

expertise and cost-effective temperature sensor solutions that make us your

best choice for RTDs, thermocouples, and thermistors.

Founded in 1979, RTD Company is the primary source for temperature sensors

to some of the largest companies in the world from manufacturers of motors

to medical devices.

As a subsidiary of Cambridge Technologies, the RTD Company offers an

additional 150 years of temperature engineering experience. With RTD

Company, you can expect three elements of customer satisfaction:

Quality, delivery, price

Whether you are looking for engineering expertise, RTDs, thermocouples,

custom design, or all of the above, RTD Company looks forward to being your

partner for all your temperature measurement needs. As President and CEO,my goals are to be accessible to your company, and to devote my time to

understanding and meeting your temperature sensor needs.

Sincerely,

Jim Sulciner

President and CEO

Toll Free: 800-899-9783

Local: 763-689-4870

Fax Free: 888-873-5033

www.rtcomany.com


3/82

Ou Custoes Coe Fst!

When you call RTD Company, you will be connected

to a real person working at our manuacturing acility.

This allows you to get the answers you need quickly

and eciently. Call (800) 899-9783 to speak with one

o our knowledgeable inside sales representatives.

Experience the RTD Company standard o high level

customer service that you deserve!

Toll Fee: 800.899.9783 www.rTdCOmpany.COm Fx Fee: 888.873.5033

Table of Contents

moto / Geeto rTd pouct Gue

Stto Sesos. . . . . . . . . . . . . 1(Slot or Stick Sensors)

Beg Sesos . . . . . . . . . . 11(BTDs)

Fm/aTEX aoveSesos . . . . . . . . . . . . . . . . . . 29

Suce mout Sesos. . . . 45(End Winding RTDs)

Hetes . . . . . . . . . . . . . . . . . . 63

(Strip or Coil Heaters)

Ebeet Sesos . . . . . . 65(Miniature Bearing RTDs)

accessoes . . . . . . . . . . . . . . 69(Holders)

NEW!


4/82


Stator SensorsStator RTD

Clss 300rEar EXiT, LaminaTEd

Clss 300 Oveve Stto wg Stle rTdsStator winding style RTDs are rectangular, at, laminated sensors commonly called Stator Sticks becausethey are inserted between the coils in the stator o a motor. These averaging type sensors are used inelectricmotors and generators or continuous sensing o the temperature and provide or consistent thermalmonitoring without alse alarms.

m szes e stock o e c custoze o ou lcto.

Single or Dual elements are available. Use Dual elements where an increased level o monitoring is required ori there is a need or both on-site and remote temperature monitoring.

RTD Company stator RTDs are built to meet the specifcations o ANSI C50.10-1990, general requirements orsynchronous motors.

we c bul to ou secctos!

Options: Side exit, paddle style, electrically conductive coatings, dual sensors with dierent elements and anATEX rating or increased saety (pending) or equipment in hazardous areas are available. In addition, higherlevels o accuracy, calibration with certifcation, special testing and custom lead wire or cable; non-standardwidths and thicknesses are also available or quote.

Sesg we Teetue (C)resstce

(Ohs)TCr

pltu0 100.000

.00385100 138.500

nckel0 120.000

.00672100 200.640

Coe

0 9.035

.0042725 10.000

100 12.897

resstce(Ohs)

Teetue (C)

whe teetue ceses, the esstceo ece o e lso ceses.

Kog the esstce o e llos outo clculte the teetue.

FaQ

What is the dierence between a .00385 and a.00392 Temperature Coecient?

The only dierence is the amount that the resistance

changes per degree o temperature. Both will read 100

ohms at 0C, but at 100C the .00385 will read 138.5

ohms and the .00392 will read 139.2 ohms. The sensor

must be properly matched to the measuring instrument

to obtain an accurate reading.

1


5/82

Fx Fee: 888.873.5033 www.rTdCOmpany.COm Toll Fee: 800.899.9783

300 Stto rTd, re Ext, Lte

CoeCoguto

Clsscto Teetue Lt mtel delectc Stegth

FH

Clss FClss H

155C180C

Eox GlssEox Glss

3,000 volts3,000 volts

CoeCoguto

Eleet accuc Teetue Coecet

p2Cp2dG2CC1dn3C

pltupltupltuCoenckel

100 Oh +/-.5% t 0C100 Oh +/-.2% t 0C100 Oh +/-.5% t 0C10 Oh +/-.2% t 25C120 Oh +/-.5% t 0C

.00385

.00385

.00392

.00427

.00672

Coe L Bo Legth

0000 Sec iches (1625=16.25 ches)

CoeEleet Coguto

Lees Colo Coe

3S3d

Thee we, SgleThee we dul

re/whte/whtere/whte/whte // Blue/yello/yello

CoeT Bo Thckess

deso St Le Gge

aBCdEFG

.030 ches

.050 ches

.078 ches

.093 ches

.125 ches

.093 ches

.125 ches

3026222222

22 Cble22 Cble

Coe y Lee Legth

000 Sec iches (120=120 iches)

Coe w Bo wth

aBCdEF

.260 iches, Sgle Eleet Ol




.500 iches

.625 iches

Ete dese pt nube Hee

300 F p2C 1625 3S B 120 d Exle pt nube



w

Ly

T


6/82


Clss 301 Oveve Stto wg Stle rTdsSide exit stator winding style RTDs are rectangular, at, laminated sensors commonly called Stator Sticksbecause they are inserted between the coils in the stator o a motor. These averaging type sensors are used inelectric motors and generators or continuous sensing o the temperature and provide or consistent thermalmonitoring without alse alarms.

Side exit stators dier rom standard rear exit stators in that the lead wire or cable exits rom the side othe body. Initially a custom sensor, side exits are becoming a popular replacement or the rear exit due toless stress on the lead wire or cable when routing to the controller. They are typically used in larger motors/generators or where there is less room available or routing cables.



RTD Company stator RTDs are built to meet the specifcations o ANSI C50.10-1990, general requirements orsynchronous motors.

we c bul to ou seccto!

Options: drilled holes, paddle style, electrically conductive coatings, dual sensors with dierent elements andan ATEX rating or increased saety (pending) or equipment in hazardous areas are available. In addition,higher levels o accuracy, calibration with certifcation, special testing and custom lead wire or cable; non-standard widths and thicknesses are also available or quote.

Secctos Clss F Clss H

Teetue Lts 155C (311F) 180C (356F)

Bo mtel G-11 Fbeglss Hgh Te. Fbeglss

Le we mtel TFE Tefo, 3 Les


Clss 301SidE EXiT, LaminaTEd

FaQ

What is meant by the term calibration?

Calibration is the process o adjusting an instrument or

measuring the deviation o a sensor so that the reading

can be correlated to the actual value being measured.

It is done by comparing the sensors output to a given

standard to determine the exact error at any given

temperature.

3


7/82


301 Stto rTd, Se Ext, Lte

CoeCoguto


F Clss F 155C Eox Glss 3,000 volts

CoeCoguto


p2Cp2dG2CC1dn3C



.00385

.00385

.00392

.00427

.00672

Coe L1 Bo Legth

0000 Sec iches (1625=16.25 ches)

CoeEleet Coguto

Lees Colo Coe3S3d4d

Thee we, SgleThee we, dulFou we, dul


re/re/whte/whte // Blue/Blue/yello/yello

Coe L2 Sesg Eleet posto

000 Sec iches (030=3.0 ches)

CoeT Bo Thckess

deso St Le Gge

aBCdE

.078 ches

.093 ches

.093 ches

.125 ches

.125 ches

22 awG Lees th Fbeglss Sleevg22 awG Lees th Fbeglss Sleevg22 awG Cble22 awG Lees th Fbeglss Sleevg22 awG Cble

Coe y Lee Legth

000 Sec iches (120=120 iches)Coe w Bo wth

0000 Sec iches (0500=.5 iches)

Coe Lee Teto

12

Ste Te1 Stggee th Butt Slce


301 F p2C 1625 3S 030 B 120 1000 1 Exle pt nube


Clss 301SidE EXiT, LaminaTEd

L1

y 8

w

TL2


8/82



Clss 302paddLE, LaminaTEd

Clss 302 Oveve Stto wg Stle rTdsAlso called Air or Gas RTDs, paddle sensors measure incoming or outgoing air temperatures in motors andgenerators. Built with holes or mounting, these air sensors provide consistent thermal monitoring withoutalse alarms.


Single or Dual elements are available. Use Dual elements where an increased level o monitoring is requiredor i there is a need or both on-site and remote temperature monitoring.

RTD Company stator RTDs are built to meet the specifcations o ANSI C50.10-1990, general requirements or

synchronous motors.


Options: Side exit, Rear exit, custom holes and sizes, electrically conductive coatings, dual sensors withdierent elements and an ATEX rating or increased saety (pending) or equipment in hazardous areas areavailable. In addition, higher levels o accuracy, calibration with certifcation, special testing and custom leadwire or cable; non-standard widths and thicknesses are also available or quote.

desol Secctos

Bo Thckess St wths we Guge

.030 .260 .344 .450 .500 .562 30 awG

.050 .305 .344 .450 .500 .562 26 awG

.078 .344 .450 .500 .562 .750 22 awG

.093 .344 .450 .500 .562 .750 22 awG

.125 .344 .450 .500 .562 .750 22 awG

FaQ

What does the term Dielectric Strength reer to?

Dielectric strength is a measure o the voltage that aninsulating material can withstand beore an electricalbreakdown occurs. Dielectric strength is aected insensors by thickness, width and material.

5


9/82



Clss 302paddLE, LaminaTEd

302 Stto rTd, ple, Lte

CoeCoguto


F Clss F 155C Eox Glss 3,000 volts

CoeEleet accuc Teetue Coecet

p2Cp2dG2CC1dn3C



.00385

.00385

.00392

.00427

.00672

CoeEleet Coguto

Lees Colo Coe

3S3d

Thee we, SgleThee we dul


Coe y Lee Legth

000 Sec iches (120=120 ches)

Coe Le Oto

aB

Lee OlLee th cble

Coe Lee Teto

12

Ste Te1 Stggee th Butt Slce


302 F p2C 3S 120 B 1 Exle pt nube

.188

11.75

10.756

y

.25 Typ. 1.88

2.38

.50 Typ.


10/82


Stator SensorsHigh Temperature Stator RTD


7

Clss 308 Oveve Hgh Teetue Stto wg Stle rTdsStator winding style RTDs are suitable or use where a temperature rating up to 200C is required. Typicallythey are inserted between the coils in the stator o a motor. These averaging type sensors are used inelectric motors and generators or continuous sensing o the temperature and provide or consistent thermalmonitoring without alse alarms.

This higher temperature model is only .040 thick and its exible design allows or mulitiple mounting options.


RTD Company stator RTDs are built to meet the specifcations o ANSI C50.10-1990, general requirements or

synchronous motors.


Options: higher levels o accuracy, calibration with certifcation, special testing and custom lead wire or cable;non-standard widths and thicknesses are available or quote.

STATOR SENSORBEarinG SEnSOr

SUrFaCE mOUnT

STandard mOUnTinG LOCaTiOnS

FaQ

What is repeatability?

The ability o a sensor to indicate the same readingunder repeated identical conditions.

resstce(Ohs)

Teetue (C)

whe teetue ceses, the esstceo ece o e lso ceses.

Kog the esstce o e llos outo clculte the teetue.


11/82


Stator SensorsHigh Temperature Stator RTD


308 Hgh Teetue Stto rTd, re Ext, Lte

CoeCoguto


n Clss n 200C Tefo Glss 1,000 volts

CoeCoguto


p2CG2C

pltupltu

100 Oh +/-.5% t 0C100 Oh +/-.5% t 0C

.00385

.00392

Coe L Bo Legth (22 ich mxu)

0000 Sec iches (1025=10.25 ches)

CoeEleet Coguto

Lees Colo Coe

3S Thee we, Sgle re/whte/whte

Coe y Le we Legth

000 Sec iches (120 = 120 iches)

Coe w Bo wth

aB

.260 iches

.305 iches


308 n p2C 1025 3S 120 B Exle pt nube

w .04

Ly


12/82


Stator SensorsStator Thermocouple


Clss 400 Oveve Stto wg Stle TheocoulesStator winding style Thermocouples are rectangular, at, laminated sensors commonly called Stator Sticksbecause they are inserted between the coils in the stator o a motor. These sensors are used in electric motorsand generators or continuous sensing o the temperature and provide or consistent thermal monitoringwithout alse alarms.

RTD Company utilizes our standard thermocouple types; J (Iron), K (Nickel), T (Copper) and E (Chromel). Thekey dierence between the RTD and the thermocouple stator winding style is that a thermocouple is pointsensing only whereas the RTD senses temperature over its sensitive length.




Options:Electrically conductive coatings and dual sensors with dierent elements. In addition, non-standardwidths and thicknesses are also available or quote.

Tewe isulto

Colos

metls

J re/whte Costt/io

K re/yello aluel/Choel

T re/Blue Costt/Coe

E re/pule Costt/Choel

Voltge(Ohs)

Teetue (C)

whe teetue ceses, the voltgeo theocoule lso ceses.

Kog the voltge o theocoulellos ou to clculte the teetue.

FaQ

What is the reason or a grounded versus

ungrounded junction?

I the concern is time response, the groundedjunction is aster than ungrounded.

I the machine/bearings they are installing thethermocouple into are electrically hot or havevoltage, you would speciy ungrounded to isolatethe thermocouple rom the machine and protectanyone who comes in contact with the leads orterminals.


13/82


Stator SensorsStator Thermocouple


400 Stto Theocoule, re Ext, Lte

CoeClsscto


FH

Clss FClss H

155C180C

Eox GlssEox Glss

3,000 volts3,000 volts

Coeaccuc

Te Eleet Colo Coe

JKTEJJ

KK

TTEE

JKTEJK

TE

SgleSgleSgleSgleduldul

duldul

re/whtere/yello

re/Bluere/pule

re/whte/re/whtere/yello/re/yello

re/Blue/re/Bluere/pule/re/pule

Coe Jucto Stle

GU

Goue JuctoUgoue Jucto

Coe L1 Bo Legth

0000 Sec iches (1625=16.25 iches)

Coe Lts o Eo

aB

St Lts o EoSecl Lts o Eo

Coe L2 Jucto posto

000Sec iches (080=8.0 iches)mu 1/2, (1/2 x L1) St

Coe T Bo ThckessaBCd

.060 iches

.078 iches

.093 iches

.125 iches

Coe w Bo wth

345678

.260 iches

.305 iches

.344 iches

.455 iches

.500 iches

.625 iches

Coe y Lee Legth



400 F J G 1625 a 080 B 5 120 Exle pt nube

L1

L2

wJucto posto

y

T

1


14/82


Bearing SensorsBearing RTD, Tip Sensitive

Clss 310CUT-TO-LEnGTH, GEnEraL pUrpOSE

Clss 310 Oveve Beg pobe Stle rTdsBearing sensor RTDs are tubular, tip sensitive sensors in which the sensing element is encased in a copperalloy tip. This allows or increased accuracy and sensitivity to temperature changes at the point o contact inbearings. Inserted at an opening on the bearing housing, they are used in electric motors and generators orcontinuous sensing o the bearings temperature.

Use with a uid sealed adjustable spring loaded holder or proper loading in any depth hole to maintaincontact with the bearing surace.

atol Secctos

isulto resstce:Sgle dul Eleets 1,000 egohs @ 500 VdC leads to casedul Eleets 100 egohs @ 50 VdC between elements

Te Costt (tcl 3 t/sec ovg te):St Stless Steel isolte Stless Steel sheth

Sgle eleet - 2.0 secosdul eleet - 3.0 secos

isulte Eox Glss Sheth 2.5 secos

pessue rtg:St Stless Steel Sheth 100 s (6.9 b)Stless Steel isolte isulte Eox Glss Sheth 30 s (2.1 b)

delectc Stegth:isolte Stless Steel Eox Glss Sheth 1,000 volts rmS @ 60 Hz o 30 secos, betee csesectos, 1 a x lekge cuet


Options:Flexible armored leads or cable, lead termination, connector options, FM/CSA/ATEX Explosion ProoRated Assemblies (pending), connection heads and fuid sealed spring loaded holders are available.


(Ohs)

TCr

pltu0 100.000

.00385100 138.500

nckel0 120.000

.00672100 200.640

Coe

0 9.035

.0042725 10.000

100 12.897

Sho th isulte T

Sho th isolte T

FaQ

Why buy an RTD versus a thermocouple?

RTDs are more accurate, drit lessover time and are less aected byRFI/EMI (Electromagnetic Intererence).

11


15/82


310 Beg rTd, T Sestve Sheth

CoeCoguto

Sheth Stle th Coe T Teetue rge

aBC

Eox GlssSt Stless Steelisolte Stless Steel

-50 to 155C (-58 to 311F)-50 to 250C (-58 to 482F)-50 to 250C (-58 to 482F)

CoeCoguto


p2Bp2CG2CC1dn3C


100 Oh +/- .12% t 0C100 Oh +/- .5% t 0C100 Oh +/- .5% t 0C10 Oh +/- .2% t 25C

120 Oh +/- .5% t 0C

.00385

.00385

.00392

.00427

.00672

CoeEleet Coguto

Lees Colo Coe

3S3d

Thee we, SgleThee we, dul


Coe L Sheth Legth

0000 Sec iches ( 1225 = 12.25 iches)

Coe d Sheth dete

BCd

.188 dete

.250 dete (St isolte Ol)

.215 dete

Coe atol Otos

nw

no OtosLee Oto (w=dee)


310 B p2C 3S 1225 C n Exle pt nube



y L

3 nO CUT ZOnE

d

COppEr Tip

1


16/82


Clss 311 Oveve Beg assebl pobe Stle rTdsBearing sensor RTD assemblies consist o a probe, holder or ftting and a connection head, i required. Thequick release spring loaded holder allows or adjustability to assure the probe tip remains in contact with thebearing surace or reliable readings and aster time response. Inserted at an opening on the bearing housing,they are used in electric motors and generators or continuous sensing o the bearings temperature.

The TQuick ftting has a shorter quick release knob or use with a transmitter in a connection head.

atol Secctos

isulto resstce:

Sgle dul Eleets - 1,000 egohs @ 500 VdC leads to casedul Eleets - 100 egohs @ 50 VdC between elements

Te Costt (tcl 3 t/sec ovg te):St Stless Steel isolte Stless Steel sheth

Sgle eleet - 2.0 secos,dul eleet - 3.0 secos

isulte Eox Glss Sheth - 2.5 secos

pessue rtg:St Stless Steel Sheth - 100 s (6.9 b)Stless Steel isolte isulte Eox Glss Sheth - 30 s (2.1 b)Flu Sel Hole - 50 s

Flu Selg:St th Vto O-gs o fu o essue selg

delectc Stegth:isolte Stless Steel Eox Glss Sheth - 1,000 volts rmS @ 60 Hz o 30 secos, betee csesectos, 1 a x lekge cuet


Options:Flexible armored leads or cable, lead termination, connector options, FM/CSA/ATEX Explosion ProoRated Assemblies (pending), connection heads and fuid sealed spring loaded holders are available.

FaQ

What i I dont know the exact L

dimension required?

It would be best to order the sensor longerthan necessary since our probes are cut tolength and the holder is adjustable.


Clss 311adJUSTaBLE SprinG LOadEd HOLdEr, FLUid SEaLEd

13


17/82



Clss 311adJUSTaBLE SprinG LOadEd HOLdEr, FLUid SEaLEd

311 Beg rTd, ajustble Sg Loe Hole, Flu Sele

CoeCoguto


aBC



CoeCoguto


p2Bp2CG2CC1dn3C



.00385

.00385

.00392

.00427

.00672

CoeEleet Coguto

Lees Colo Coe3S3d



Coe L Sheth Legth

0000 Sec iches ( 1225 = 12.25 iches)

Coe Coecto He (Tel Block iclue)

naBdG

no Coecto HeStless SteelaluuCst ioSll Stless Steel

Coeajustble Sg Loe Hole Coguto

Hole pocess Cotol O.a.L.

1267

QuckQuckQuck

TQuck

1/2 npT1/2 npT1/8 npT1/2 npT

1/2 npT3/4 npT

noe1/2 npT

3.353.503.502.75

Coe d Sheth dete

BCd

.188 dete


.215 dete

Coe atol Otos

nTw

no OtosTstte (TQuck Fttg Ol)Lee Oto (w=dee)


311 B p2C 3S 1225 G 2 C n Exle pt nube

4

.5

(1.45)

O.a.L. L

d

Coe TFlu Sel

pocess ThesCotol thes

Quck relese Kob

1


18/82



Clss 312BayOnET HOLdEr

Clss 312 Oveve Boet Stle Beg pobe rTdsBearing sensor RTDs are tubular, tip sensitive sensors in which the sensing element is encased in a copperalloy tip. This allows or increased accuracy and sensitivity to temperature changes at the point o contact inbearings. Inserted at an opening on the bearing housing, they are used in electric motors and generators orcontinuous sensing o the bearings temperature.

Bayonet mounting provides a simple and inexpensive spring loaded option or installing probes into solidswhen a uid seal is not required. Includes a 1/8 NPT mounting adaptor or ease o locking the sensor inplace.

atol Secctos

isulto resstce:Sgle dul Eleets - 1,000 egohs @ 500 VdC leads to casedul Eleets - 100 egohs @ 50 VdC between elements

Te Costt (tcl 3 t/sec ovg te):St Stless Steel isolte Stless Steel shethSgle eleet - 2.0 secos, dul eleet 3.0 secosisulte Eox Glss Sheth - 2.5 secos

pessue rtg:St Stless Steel Sheth - 100 s (6.9 b)Stless Steel isolte isulte Eox Glss Sheth - 30 s (2.1 b)

delectc Stegth:isolte Stless Steel Eox Glss Sheth - 1,000 volts rmS @ 60 Hz o 30 secos,betee cse sectos, 1 a x lekge cuet


Options:Flexible armored leads or cable, lead termination, connector options and additional1/8 NPT adaptor lengths are available.


(Ohs)

TCr

pltu0 100.000

.00385100 138.500

nckel0 120.000

.00672100 200.640

Coe

0 9.035

.0042725 10.000

100 12.897

BayOnET HOLdEr EnGaGEdwiTH 1/8 npT adapTOr

FaQ

Is the bayonet style RTD available in adiameter other than .188?

Standard bayonet style RTDs are only availablein a .188 diameter. However, RTD Companycan work directly with you to solve yourcustom application needs.

15


19/82




1

OaL = L + 2

.188

BayOnET HOLdEr

y

L

.25

SHOwn wiTH OpTiOn n

SHOwn wiTH OpTiOn a

1.0

312 Beg rTd, T Sestve, Boet Hole

CoeCoguto


aBC



CoeCoguto


p2Bp2CG2CC1dn3C



.00385

.00385

.00392

.00427

.00672

CoeEleet Coguto

Lees Colo Coe

3S3d



Coe L Sheth Legth

0000 Sec iches ( 1225 = 12.25 iches)

Coe atol Otos

naw

no Otos1/8 npT moutg ato (7/8 Legth St)Lee Oto (w=dee)


312 B p2C 3S 1225 a Exle pt nube


20/82


Clss 313 Oveve Boet Stle Beg pobe rTds th Flex aoeSheth

Flex armor sheathed bearing RTDs are tip sensitive sensors in which the sensing element is encased in acopper alloy tip that is attached to a ex armor sheath. This allows or increased accuracy and sensitivity totemperature changes at the point o contact in bearings while providing greater mounting exibility. Insertedat an opening on the bearing housing, they are used in electric motors and generators or continuous sensingo the bearings temperature.

Bayonet mounting provides a simple and inexpensive spring loaded option or installing probes into solidswhen a uid seal is not required. Includes a 1/8 NPT mounting adaptor or ease o locking the sensor inplace. In this application the bayonet holder is ully adjustable over the entire specifed L or immersionlength. Note: this sensor is not or use in fuid applications.

atol Secctos

isulto resstce:Sgle dul Eleets - 1,000 egohs @ 500 VdC leads to casedul Eleets - 100 egohs @ 50 VdC between elements

Te Costt (tcl 3 t/sec ovg te):Sgle eleet - 2.0 secos, dul eleet - 3.0 secos

delectc Stegth:

1,000 volts rmS @ 60 Hz o 30 secos, betee cse sectos, 1 a x lekge cuet


Options: Armored leads or cable, single or dual elements, lead termination, connector options and additional1/8 NPT adaptor lengths are available.


(Ohs)TCr

pltu0 100.000

.00385100 138.500

nckel0 120.000

.00672100 200.640

Coe

0 9.035

.0042725 10.000

100 12.897


Bearing SensorsBearing RTD, Tip Sensitive with Flex Armored Sheath

Clss 313adJUSTaBLE BayOnET HOLdEr

FaQ

What is meant by Time Constant?

Time Constant reers to how quickly an RTDresponse to temperature changes.

17


21/82


Bearing SensorsBearing RTD, Tip Sensitive with Flex Armored Sheath


313 Beg rTd, Boet Hole

CoeCoguto


p2Bp2CG2CC1dn3C



.00385

.00385

.00392

.00427

.00672

CoeEleet Coguto

Lees Colo Coe

3S3d



Coe L Sheth Legth

000 Sec iches ( 125 = 12.5 iches)Coe atol Otos

naw

no Otos1/8 npT moutg ato (7/8 Legth St)Lee Oto (w=dee)


313 p2C 3S 125 a Exle pt nube

L

.50

.188

Coe T

Boet ato

120

1


22/82


Bearing SensorsBearing RTD, Thrust

Clss 314THrUST BEarinG, GEnEraL pUrpOSE

Clss 314 Oveve Thust Beg Stle rTdsThrust Bearing RTDs are tubular, tip sensitive sensors that are typically embedded directly into the end o thethrust bearing shoe. The tip sensitive area allows or ast response to temperature changes at the point ocontact in the thrust bearings.

RTD Company can manuacture thrust bearing RTDs in a variety o diameters and lengths.

atol Secctos

isulto resstce:Sgle dul Eleets - 1,000 egohs @ 500 VdC leads to case

dul Eleets - 100 egohs @ 50 VdC between elements

Te Costt (tcl 3 t/sec ovg te):St Stless Steel isolte Stless Steel sheth -

Sgle eleet - 2.0 secosdul eleet - 3.0 secos

isulte Eox Glss Sheth - 2.5 secos

pessue rtg:100 s (6.9 b)

delectc Stegth:1,000 volts rmS @ 60 Hz o 30 secos, betee cse sectos, 1 a x lekge cuet


Options: Flexible armored leads or cable, lead termination, connector options, FM/CSA/ATEX Explosion ProoRated Assemblies (pending), connection heads and fuid sealed spring loaded holders are available.


(Ohs)TCr

pltu0 100.000

.00385100 138.500

nckel 0 120.000 .00672100 200.640

Coe

0 9.035

.0042725 10.000

100 12.897

FaQ

What is Heat Transer?

The process o thermal energyfowing rom a body o highenergy to a body o low energy.

19


23/82


Bearing SensorsBearing RTD, Thrust

Clss 314THrUST BEarinG, GEnEraL pUrpOSE

314 Beg rTd, Thust Beg, Geel puoseCoe Teetue rge

m moete Teetue rge = -50 to 250C (-58 to 482F)

CoeCoguto


p2Bp2CG2CC1dn3C



.00385

.00385

.00392

.00427

.00672

CoeEleet Coguto

Lees Colo Coe

2S3S

To we, SgleThee we, Sgle

re/whtere/whte/whte

Coe y Lee Legth

000 Sec iches ( 010 = 10 iches)

Coe d Sheth dete

aBCd

.125 dete

.188 dete

.250 dete

.215 dete

Coe atol Otos

nw



314 m p2C 3S 010 C n Exle pt nube

y 2.5

d

Tefo isulte Lees

316 S.S. Sheth

2


24/82


Bearing SensorsBearing Thermocouple, Tip Sensitive


Clss 410 Oveve Beg pobe Stle TheocoulesBearing sensor thermocouples are tubular, tip sensitive sensors in which the thermocouple junction is encasedin a copper alloy tip. This allows or increased accuracy and sensitivity to temperature changes at the pointo contact in bearings. Inserted at an opening on the bearing housing, they are used in electric motors andgenerators or continuous sensing o the bearings temperature.

Use with a uid sealed adjustable spring loaded holder or proper loading in any depth hole to maintaincontact with the bearing surace.

atol Secctos

isulto resstce (ugoue juctos ol):1,000 egohs @ 500 VdC leads to case

Te Costt (tcl 3 t/sec ovg te):Goue Jucto - 1.5 secosUgoue Jucto - 7 secos

pessue rtg:St Stless Steel Sheth - 100 s (6.9 b)Stless Steel isolte isulte Eox Glss Sheth - 30 s (2.1 b)

delectc Stegth:isolte Stless Steel Eox Glss Sheth - 1,000 volts rmS @ 60 Hz o 30 secos, betee cse

sectos, 1 a x lekge cuet


Options:Flexible armored leads or cable, lead termination, connector options, FM/CSA/ATEX Explosion ProoRated Assemblies (pending), connection heads and fuid sealed spring loaded holders also available.

Sho th isulte T

Tewe isulto

Colosmetls

J re/whte Costt/io

K re/yello aluel/ChoelT re/Blue Costt/Coe


Sho th isolte T

FaQ

Why buy a thermocouple versus an RTD?

Ruggedness. Consider a thermocouple in anapplication where shock and vibration or hightemperatures are a concern.


25/82

Fx Fee: 888.873.5033 www.rTdCOmpany.COm Toll Fee: 800.899.9783 2



410 Beg Theocoule, T Sestve Sheth

CoeCoguto


aBC



Coeaccuc

Te Eleet Colo Coe

JKTEJJ

KKTTEE

JKTEJ

KTE

SgleSgleSgleSgledul

dulduldul

re/whtere/yello

re/Bluere/pule

re/whte/re/whte

re/yello/re/yellore/Blue/re/Blue

re/pule/re/pule

Coe Jucto Stle

GU


Coe Lts o Eo

aB


Coe L Sheth Legth

0000 Sec iches (1225=12.25 iches)

Coe d Sheth dete

BCd

.188 dete


.215 dete

Coe atol Otos

nw



410 B J G a 1225 C n Exle pt nube

L

3 nO CUT ZOnE

y

d

COppEr Tip


26/82


Bearing SensorsBearing Thermocouple, Tip Sensitive, Cut-to-Length

Clss 411adJUSTaBLE SprinG LOadEd HOLdEr, FLUid-SEaLEd

Clss 411 Oveve Beg pobe assebl Stle TheocoulesBearing sensor Thermocouple assemblies consist o a probe, holder or ftting and a connection head, irequired. The quick release spring loaded holder allows or adjustability to assure the probe tip remains incontact with the bearing surace or reliable readings and aster time response. Inserted at an opening onthe bearing housing, they are used in electric motors and generators or continuous sensing o the bearingstemperature.

The TQuick ftting has a shorter quick release knob or use with a transmitter in a connection head.

atol Secctos


Te Costt (tcl 3 t/sec ovg te):Goue Jucto - 1.5 secosUgoue Jucto - 7 secos

pessue rtg:St Stless Steel Sheth - 100 s (6.9 b)Stless Steel isolte isulte Eox Glss Sheth - 30 s (2.1 b)Flu Sel Hole - 50 s

Flu Selg:

St th Vto O-gs o fu o essue selg

delectc Stegth:isolte Stless Steel Eox Glss Sheth - 1,000 volts rmS @ 60 Hz o 30 secos, betee csesectos, 1 a x lekge cuet


Options:Flexible armored leads or cable, lead termination, connector options, FM/CSA/ATEX Explosion ProoRated Assemblies (pending), connection heads and fuid sealed spring loaded holders also available.

Tewe isulto

Colosmetls

J re/whte Costt/io


T re/Blue Costt/Coe


FaQ

The e le e o theocoule s lsegtve.

23


27/82


Bearing SensorsBearing Thermocouple, Tip Sensitive, Cut-to-Length

Clss 411adJUSTaBLE SprinG LOadEd HOLdEr, FLUid-SEaLEd

411 Beg Theocoule, ajustble Sg Loe Hole, Flu Sele

CoeCoguto


aBC



Coeaccuc

Te Eleet Colo Coe

JKTEJJKKTTEE

JKTEJKTE

SgleSgleSgleSgleduldulduldul

re/whtere/yellore/Blue

re/pulere/whte/re/whte

re/yello/re/yellore/Blue/re/Blue

re/pule/re/pule

Coe Jucto Stle

GU


Coe Lts o Eo

aB


Coe L Sheth Legth

0000 Sec iches (1225=12.25 iches)

Coe Coecto He

naBdG

no Coecto HeStless SteelaluuCst ioSll Stless Steel

Coeajustble Sg Loe Hole Coguto

Hole pocess Cotol O.a.L.

1267

QuckQuckQuck

TQuck

1/2 npT1/2 npT1/8 npT1/2 npT

1/2 npT3/4 npT

noe1/2 npT

3.353.503.502.75

Coe d Sheth dete

BCd

.188 dete


.215 dete

Coe atol Otos

nw



411 B J G a 1225 G 1 C n Exle pt nube

4

.5

(1.45)

O.a.L. L

d

Coe TFlu Sel

pocess ThesCotol thes

Quck relese Kob

2


28/82




Clss 412 Oveve Boet Stle Beg pobe TheocoulesBearing sensor thermocouples are tubular, tip sensitive sensors in which the thermocouple junction is encased in a copper

alloy tip. This allows or increased accuracy and sensitivity to temperature changes at the point o contact in bearings.

Inserted at an opening on the bearing housing, they are used in electric motors and generators or continuous sensing o

the bearings temperature.

Bayonet mounting provides a simple and inexpensive spring loaded option or installing probes into solids when a uid

seal is not required. Includes a 1/8 NPT mounting adaptor or ease o locking the sensor in place.

atol Secctos


Te Costt (tcl 3 t/sec ovg te):Goue Jucto 1.5 secosUgoue Jucto 7 secos

pessue rtg:St Stless Steel Sheth 100 s (6.9 b)Stless Steel isolte isulte Eox Glss Sheth 30 s (2.1 b)

delectc Stegth:isolte Stless Steel Eox Glss Sheth 1,000 volts rmS @ 60 Hz o 30 secos, betee cse

sectos, 1 a x lekge cuet


Options:Flexible armored leads or cable, lead termination, connector options and additional 1/8 NPTadaptor lengths are available.


Tewe isulto

Colosmetls

J re/whte Costt/io

K re/yello aluel/ChoelT re/Blue Costt/Coe


FaQ

How does a thermocouple work?

Thermocouples are composed o two dissimilarmetals, joined to produce a voltage when theapplied temperature diers rom the reerencetemperature.

25


29/82




412 Beg Theocoule, T Sestve, Boet Hole

CoeCoguto


aBC



Coeaccuc

Te Eleet Colo Coe

JKTE

JJKKTTEE

JKTE

JKTE

SgleSgleSgleSgle

duldulduldul

re/whtere/yello

re/Bluere/pule

re/whte/re/whtere/yello/re/yellore/Blue/re/Blue

re/pule/re/pule

Coe Jucto Stle

GU


Coe L Sheth Legth

0000 Sec iches (1225=12.25 iches)

Coe Lts o Eo

aB


Coe atol Otos

naw

no Otos1/8 npT moutg ato (7/8 St)Lee Oto (w=dee)


412 B J G 1225 a a Exle pt nube

2

y

BayOnET HOLdEr.188

.25

L

OaL = L + 2

SHOwn wiTH OpTiOn n

SHOwn wiTH OpTiOn a

1.0


30/82


Bearing SensorsBearing Thermocouple, Tip Sensitive with Flex Armored Sheath


Clss 413 Oveve Boet Stle Theocoule th Flex aoe ShethFlex armor sheathed bearing Thermocouples are tip sensitive sensors in which the sensing element is encasedin a copper alloy tip that is attached to a ex armor sheath. This allows or increased accuracy and sensitivity totemperature changes at the point o contact in bearings while providing greater mounting exibility. Insertedat an opening on the bearing housing, they are used in electric motors and generators or continuous sensingo the bearings temperature.

Bayonet mounting provides a simple and inexpensive spring loaded option or installing probes into solidswhen a uid seal is not required. Includes a 1/8 NPT mounting adaptor or ease o locking the sensor inplace. In this application the bayonet holder is ully adjustable over the entire specifed L or immersionlength. Note: this sensor is not or use in fuid applications.

atol Secctos


Te Costt (tcl 3 t/sec ovg te):Sgle eleet - 2.0 secos, dul eleet 3.0 secos


Options:Armored leads or cable, single or dual elements, lead termination, connector options and additional

1/8 NPT adaptor lengths are available.


Tewe isulto

Colosmetls

J re/whte Costt/io


T re/Blue Costt/Coe


FaQ

Never run electrical wires in the same conduitas thermocouple extension wires.

27


31/82


Bearing SensorsBearing Thermocouple, Tip Sensitive with Flex Armored Sheath


413 Beg Theocoule, T Sestve, Boet Hole

Coeaccuc

Te Eleet Colo Coe

JKTEJJ

KKTTEE

JKTEJKTE


re/whtere/yello

re/Bluere/pule

re/whte/re/whtere/yello/re/yello

re/Blue/re/Bluere/pule/re/pule

Coe Jucto Stle

GU


Coe Lts o Eo

aB


Coe L ao Shet Legth


Coe atol Otos

naw

no Otos1/8 npT moutg ato (7/8 St)Lee Oto (w=dee)


413 J G a 120 a Exle pt nube

L

.50

.188

Coe T

Boet ato

120

2


32/82


Explosion Proof Bearing AssemblyTip Sensitive

Clss 1020QUiCK rELEaSE, SprinG LOadEd FiTTinG

Clss 1020 Oveve Exloso poo rTd asseblesTip sensitive, spring-loaded temperature sensor assemblyUsed in electric motors and generators or continuous sensing o the temperature o the bearingsApproved or use in explosion proo and ameproo applicationsU.S. or European threads available

atol Secctos

Teetue rge (pocess):-50 to 260C

mtel:T-sestve obe: stless steel th coe o luu t

- luu t eque o ll aTEX Gou iiC lctos (cetlee gs toshee)Sg-loe, Quck relese Fttgs: stless steelCoecto He: eox-cote luu o stless steelTel Block: 94V-0 te beglss


isulto resstce:1,000 egohs u betee eleet cse t 500 VdC100 egohs u betee eleets t 500 VdC (ul rTd sesos ol)

Te Costt (tcl 3 t/sec ovg te):3 secos

Exloso poo Fleoo rtgs:ntol C Electcl Coe

Clss i, dvso 1, Gous B, C, dClss ii/iii, dvso 1, Gous E, F, GT5 (T=80C), T6 (T=65C)

ntol Electcl Coe (atcle 505)Clss i, Zoe 1, aEx iiCT5 (T=80C), T6 (T=65C)

C Electcl Coe (iEC 60079)Clss i, Zoe 1, Ex iiCT5 (T=80C), T6 (T=65C)

aTEXii 2 G Ex iiC T5 (T=80C), T6 (T=65C) Gb

Hzous Locto rtg Vcto:Fo rFQs oes, lese sec Hzous Locto rtg equeets.

29

FMC US

APPROVED


33/82


Explosion Proof Bearing AssemblyTip Sensitive


1020 Exloso poo rTd assebl

Coe

Coguto

Eleet accucTeetueCoecet

Colo Coe

p2B3Sp2B3dp2B4Sp2a3Sp2a3dp2a4SG2C3SG2C3dG2C4Sp6B3Sp6B3dp6B4S

C1d3SC1d4Sn3C3Sn3C3dn3C4S

pltu, Sgle, 3 wepltu, dul, 3 we

pltu, Sgle, 4 wepltu, Sgle, 3 wepltu, dul, 3 we



pltu, Sgle, 4 we

Coe, Sgle, 3 weCoe, Sgle, 4 wenckel, Sgle, 3 wenckel, dul, 3 we

nckel, Sgle, 4 we

100 Oh +/-.12% t 0C100 Oh +/-.12% t 0C100 Oh +/-.12% t 0C100 Oh +/-.06% t 0C100 Oh +/-.06% t 0C100 Oh +/-.06% t 0C100 Oh +/-.5% t 0C100 Oh +/-.5% t 0C100 Oh +/-.5% t 0C

1,000 Oh +/-.12% t 0C1,000 Oh +/-.12% t 0C1,000 Oh +/-.12% t 0C


.00385

.00385

.00385

.00385

.00385

.00385

.00392

.00392

.00392

.00385

.00385

.00385

.00427

.00427

.00672

.00672

.00672


re/re/whte/whtere/whte/whte

re/whte/whte // Blue/yello/yellore/re/whte/whte




re/whte/whtere/re/whte/whte


re/re/whte/whte

Coe L iseto Legth

000Sec iches (245 = 24.5)mu 1.0 ch mxu o 40.0 ches; 0.5 ch ceets

Coe Coecto He (Fbeglss Tel Block iclue)

rS

Lge aluu Exloso pooLge Stless Steel Exloso poo

Coe Coecto He Cout The

456

1/2 npT3/4 npTm20 x 1.5, (not o use C dvsos)

Coe Sg Loe Quck relese FttgFG

3/4 npT Cout x 1/2 npT pocess3/4 npT Cout x G 1/2 npT pocess

Coe Sheth dete

dEC

.215 dete

.236 dete, (6)

.250 dete


1020 p2B3S 125 r 5 F d Exle pt nube

L iseto Legth

Otol Coe oaluu T

Seso

(0.53)

3/4 npT Thes

Coecto He

1/2 npT, 3/4 npT o m20 x 1.5 thee el g ot - the etcto lbelle ove ot. Cout sel ot eque.

Gou Sce

Fleth 3 Fttg th itegl Fleth

1/2 npT o iSO 228/1 (G1/2) pocess Coecto Thes

Fleth 1 Fleth 2

3


34/82


Explosion Proof Bearing AssemblyTip Sensitive with Transmitter


Clss 1021 Oveve Exloso poo rTd asseblesTip sensitive, spring-loaded temperature sensor assembly.Used in electric motors and generators or continuous sensing o the temperature o the bearingsApproved or use in explosion proo and ameproo applicationsU.S. or European threads available

atol Secctos


mtel:T-sestve obe: stless steel th coe o luu t

- luu t eque o ll aTEX Gou iiC lctos (cetlee gs toshee)Sg-loe, Quck relese Fttgs: stless steelCoecto He: eox-cote luu o stless steelTstte: 94V-0 rte


isulto resstce:1,000 egohs u betee eleet cse t 500 VdC100 egohs u betee eleets t 500 VdC (ul rTd sesos ol)







Hzous Locto rtg Vcto:Fo rFQs oes, lese secHzous Locto rtg equeets.

Tstte Secctos

Outut:4 to 20 a ove sece ge, leth teetue

Clbto accuc:rTd - x. o +/-0.1% o +/-0.2C o sTC - x. o +/-0.1% o +/-20V o s

Let:rTd - 0.1% o sTC - 0.2% o s

abet Oetg Teetue:-40 to 85C

Sul Voltge:8 to 32 VdC

31

FMC US

APPROVED


35/82


Explosion Proof Bearing AssemblyTip Sensitive with Transmitter


1021 Exloso poo rTd assebl th Tstte

Coe

Coguto

Eleet accucTeetueCoecet

Colo Coe

p2B3Sp2B3dp2B4Sp2a3Sp2a3dp2a4SG2C3SG2C3dG2C4Sp6B3Sp6B3dp6B4SC1d3SC1d4Sn3C3Sn3C3dn3C4S

pltu, Sgle, 3 wepltu, dul, 3 we




pltu, Sgle, 4 weCoe, Sgle, 3 weCoe, Sgle, 4 wenckel, Sgle, 3 wenckel, dul, 3 we

nckel, Sgle, 4 we

100 Oh +/-.12% t 0C100 Oh +/-.12% t 0C100 Oh +/-.12% t 0C100 Oh +/-.06% t 0C100 Oh +/-.06% t 0C100 Oh +/-.06% t 0C100 Oh +/-.5% t 0C100 Oh +/-.5% t 0C100 Oh +/-.5% t 0C

1,000 Oh +/-.12% t 0C1,000 Oh +/-.12% t 0C1,000 Oh +/-.12% t 0C


.00385

.00385

.00385

.00385

.00385

.00385

.00392

.00392

.00392

.00385

.00385

.00385

.00427

.00427

.00672

.00672

.00672







re/whte/whtere/re/whte/whte


re/re/whte/whte

Coe L iseto Legth



rS



456


Coe Sg Loe Quck relese Fttg

FG


Coe Sheth dete

dEC

.215 dete

.236 dete, (6)

.250 dete

Coe Tstte

T

pogble alog Tstte

10C . s (n pt), 100C . s (Cu)

CoeTstte mu Teetue

-50C (4a outut)

n50Use n to esgte egtve teetuesUse p o ostve teetuesExle n50 = egtve 50 egees

CoeTstte mxu Teetue

+260C (20a outut)

p100Use n to esgte egtve teetuesUse p o ostve teetuesExle p100 = ostve 100 egees

Coe Teetue Scle

FC

FhehetCelsus


1021 p2B3S 125 r 5 F d T n50 p100 C Exle pt nube

L iseto Legth

Otol Coe oaluu T

Seso

(0.53)

3/4 npT Thes

Coecto He

1/2 npT, 3/4 npT o m20 x 1.5 thee el g ot - the etctolbel le ove ot. Cout sel ot eque.

Gou Sce



Fleth 1 Fleth 2

3


36/82


Explosion Proof Bearing AssemblyTip Sensitive Thermocouple


Clss 1022 Oveve Exloso poo Theocoule asseblesTip sensitive, spring-loaded temperature sensor assembly.Used in electric motors and generators or continuous sensing o the temperature o the bearingsApproved or use in explosion proo and ameproo applicationsU.S. or European threads available

atol Secctos


mtel:T-sestve obe: stless steel th coe o luu t (lcto eeet)Sg-loe, Quck relese Fttgs: stless steelCoecto He: eox-cote luu o stless steelTel Block: 94V-0 te beglss


isulto resstce:1,000 egohs u betee eleet cse t 500 VdC (Ugoue TC Ol)

Te Costt (tcl 3 t/sec ovg te):

3 secos






Hzous Locto rtg Vcto:Fo rFQs oes, lese sec Hzous Locto rtg equeets.

33

FMC US

APPROVED


37/82


Explosion Proof Bearing AssemblyTip Sensitive Thermocouple


1022 Exloso poo Theocoule assebl

Coeaccuc

Te Eleet Colo Coe

TJKE

TTJJ

KKEE

TJKETJKE


re/Bluere/whtere/yellore/pule

re/Blue // re/Bluere/whte // re/whte

re/yello // re/yellore/pule // re/pule

Coe Jucto Stle

G

U

Goue

UgoueCoe L iseto Legth



rS



456



FG


Coe Sheth dete

dEC

.215 dete

.236 dete, (6)

.250 dete


1022 J G 125 r 5 F d Exle pt nube

L iseto Legth

Otol Coe oaluu T

Seso

(0.53)

3/4 npT Thes

Coecto He

1/2 npT, 3/4 npT o m20 x 1.5 thee el g ot - the etctolbel le ove ot. Cout sel ot eque.

Gou Sce



Fleth 1 Fleth 2

3


38/82


Explosion Proof Bearing AssemblyTip Sensitive Thermocouple with Transmitter


Clss 1023 Oveve Exloso poo Theocoule asseblesTip sensitive, spring-loaded temperature sensor assembly.Used in electric motors and generators or continuous sensing o the temperature o the bearingsApproved or use in explosion proo and ameproo applicationsU.S. or European threads available

atol Secctos


mtel:T-sestve obe: stless steel th coe o

luu t (lcto eeet)Sg-loe, Quck relese Fttgs: stless steelCoecto He: eox-cote luu o stless steelTstte: 94V-0 rte


isulto resstce:1,000 egohs u betee eleet cse t 500 VdC (Ugoue TC Ol)







Hzous Locto rtg Vcto:Fo rFQs oes, lese sec HzousLocto rtg equeets.

Tstte Secctos

Outut:4 to 20 a ove sece ge, leth teetue

Clbto accuc:rTd - x. o +/-0.1% o +/-0.2C o sTC - x. o +/-0.1% o +/-20V o s

Let:

rTd - 0.1% o sTC - 0.2% o s

abet Oetg Teetue:-40 to 85C

Sul Voltge:8 to 32 VdC

35

FMC US

APPROVED


39/82


Explosion Proof Bearing AssemblyTip Sensitive Thermocouple with Transmitter


1023 Exloso poo Theocoule assebl th Tstte

Coeaccuc

Te Eleet Colo Coe

TJKETTJJKKEE

TJKETJKE


re/Bluere/whtere/yellore/pule

re/Blue // re/Bluere/whte // re/whte

re/yello // re/yellore/pule // re/pule

Coe Jucto Stle

GU

GoueUgoue

Coe L iseto Legth

000Sec iches (245 = 24.5)

mu 1.0 ch mxu o 40.0 ches; 0.5 ch ceetsCoe Coecto He (Fbeglss Tel Block iclue)

rS

Lge aluu Exloso pooLge Stlesss Steel Exloso poo


456



FG


Coe Sheth dete

dEC

.215 dete

.236 dete, (6)

.250 dete

Coe Tstte

Tpogble alog Tstte50C . s o theocoules

CoeTstte mu Teetue

-50C (4a outut)

n50Use n to esgte egtve teetuesUse p o ostve teetuesExle n50 = egtve 50 egees

CoeTstte mxu Teetue

+260C (20a outut)

p100Use n to esgte egtve teetuesUse p o ostve teetuesExle p100 = ostve 100 egees

Coe Teetue Scle

FC

FhehetCelsus


1023 J G 125 r 5 F d T n50 p100 C Exle pt nube

(See page 34 or product photo and details.)

3


40/82


ATEX/FM (US/Canada) Approved RTD for Increased SafetyThin Film Sensing Element (Point Sensing)

Clss 1120, 1121, 1122wiTH STandard LEad wirES Or OpTiOnaL CaBLE

FMC US

APPROVED

OveveFiberglass insulated thin flm RTD with Teon/Polyimide lead wires/CableThin Film element senses the temperature measurement at a specifc pointUsed in electric motors and generators or continuous sensing o the stator windings temperatureDesigned or use in hazardous areas where ammable gas may be presentRated or Class H (180C) continuous usePlatinum 100/0.00385, Platinum 100/0.00392, Nickel 120/0.00672, Copper 10/0.00427 ohm resistancecurvesEC-type certifcate FM 11 ATEX 0029 UThis sensor meets the requirements or electrical devices used in hazardous locations o Group II, Category2 and is marked with an Ex in accordance with:

- En 60079-0:2009 Geel requeets- En 60079-7:2007 icese Set e

rtgs:

ii 2G Ex e ii Gb Fm 11 aTEX 0029 U

Clss i, Zoe 1, aEx/Ex e ii

Secctos:

Teetue Lt: -60 to 180C (-76 to 356F) Clss H

Bo mtel: G11 (Eox/Glss) beglss

Le es: 2,3 o 4 e le cogutos, Tefo o pole sulte couctos

delectc stegth: U to 5000 VaC eeg o le e coguto

Seso legth: 1.75 ch u

Seso thckess: 0.078 to 0.157 (2.0 to 4.0) ol thckess

Seso th: 0.260 ch (6.6 ) u ol th o 2,3 e cogutos0.285 ch (7.24 ) u ol th o 4 e cogutos

37


41/82


Coe aTEX aove Th Fl Stto Sesos o icese Set

Cble/Le we Coguto Voltge rtg

112011211122

Stto Seso th rbbo CbleStto Seso th pTFE isulte ivul Le wesStto Seso th pole isulte ivul Le wes

5000 Vc1000 Vc1000 Vc

CoeEleet Coguto (Sgle Eleets Ol)

nol resstce Eleet accuc Teetue Coecet

p2dp2CG2Cn3C

100100100120

pltupltupltu

nckel

+/-0.2%+/-0.5%+/-0.5%+/-0.5%

0.003850.003850.003920.00672

Coe Bo Legth L (1.75 ch mu)

0000 Sec 0.01 ch ceets (12 ches = 1200)

CoeLe we Coguto

Le we Cout Colo Coe

2S3S4S

To we LesThee we LesFou we Les

re/whtere/whte/whte

re/re/whte/whte

CoeBo Thckess T

Thckess (ch) Thckess ()

aBCdE

0.0780.0980.1180.1380.157

2.02.53.03.54.0

Coe Le we Legth y

000 Sec iches (120 ches = 120)

CoeSeso Bo wth w

0.26 mu wth o 2 3 we Sesos0.285 mu wth o 4 we Sesos

0000 Sec 0.001 ch ceets (0.285 ches = 0285)


1120 p2C 1200 3S C 120 0285 Exle pt nube



FMC US

APPROVED

w

Ly

3


42/82


OveveFiberglass insulated thin flm RTD with Teon/Polyimide lead wires/CableOptional elastomer flled cable (minimum o 4 eet o fll on sensor end o cable)Thin Film element senses the temperature measurement at a specifc pointUsed in electric motors and generators or continuous sensing o the stator windings temperatureDesigned or use in hazardous areas where ammable gas may be presentRated or Class H (180C) continuous usePlatinum 100/0.00385, Platinum 100/0.00392, Nickel 120/0.00672, Copper 10/0.00427 ohmresistance curvesEC-type certifcate FM 11 ATEX 0029 UThis sensor meets the requirements or electrical devices used in hazardous locations o Group II,

Category 2 and is marked with an Ex in accordance with:


rtgs:



Secctos:





Seso legth: 1.75 ch u




Clss 1123, 1124, 1125, 1126wiTH STandard LEad wirES Or OpTiOnaL ELaSTOmEr FiLLEd CaBLE

FMC US

APPROVED

39


43/82




FMC US

APPROVED

Coe aTEX aove Th Fl Stto Sesos o icese Set th Otol Elstoe Flle Cble


1123112411251126

Stto Seso th Tste Cble, Shk TubgStto Seso th Shele Tste Le wes, Shk Tubg

Stto Seso th Tste CbleStto Seso th Shele Tste Le wes

3200 Vc3200 Vc1500 Vc1500 Vc



p2dp2CG2Cn3C

100100100120

pltupltupltu

nckel

+/-0.2%+/-0.5%+/-0.5%+/-0.5%

0.003850.003850.003920.00672

Coe Bo Legth L (1.75 ch mu)

0000 Sec 0.01 ch ceets (12 ches = 1200)

Coe Le we CogutoLe we Cout Colo Coe

2S3S4S


re/whtere/whte/whte

re/re/whte/whte

CoeBo Thckess T


aBCdE

0.0780.0980.1180.1380.157

2.02.53.03.54.0

Coe Le we Legth y


Coe Elstoe Flle Cble Oto

Fn

Elstoe Flle (Cble s lle th elstoe o . o 2 eet o seso e o cbleno Elstoe Fll o Cble

CoeSeso Bo wth w


0000 Sec 0.001 ch ceets (0.285 ches = 0285)


1123 p2C 1200 3S C 120 F 0285 Exle pt nube

w

Ly

4


44/82


ATEX/FM (US/Canada) Approved RTD for Increased SafetyWire Wound Sensing Element (Averaging)


FMC US

APPROVED

OveveFiberglass insulated wire wound RTD with Teon/Polyimide lead wires/CableOptional elastomer flled cable (minimum o 4 eet o fll on sensor end o cable)Wire wound element averages the temperature measurement over its sensitive lengthUsed in electric motors and generators or continuous sensing o the stator windings temperatureDesigned or use in hazardous areas where ammable gas may be presentRated or Class H (180C) continuous usePlatinum 100/0.00385, Platinum 100/0.00392, Nickel 120/0.00672, Copper 10/0.00427 ohmresistance curvesEC-type certifcate FM 11 ATEX 0029 UThis sensor meets the requirements or electrical devices used in hazardous locations o Group II,

Category 2 and is marked with an Ex in accordance with:


rtgs:



Secctos:





Seso legth: 6 ches u



41


45/82


FMC US

APPROVED



Coe aTEX aove we wou Stto Sesos o icese Set th Otol Elstoe Flle Cble


1103110411051106

Stto Seso th Tste Cble, Shk TubgStto Seso th Shele Tste Les, Shk Tubg

Stto Seso th Tste CbleStto Seso th Shele Tste Le we

3200 Vc3200 Vc1500 Vc1500 Vc



p2dp2CG2CC1dn3C

10010010010

120


+/-0.2%+/-0.5%+/-0.5%+/-0.2%+/-0.5%

0.003850.003850.003920.004270.00672

Coe Bo Legth L (6 ch mu)

0000 Sec 0.01 ch ceets (12 ches = 1200)


2S3S4S


re/whtere/whte/whte

re/re/whte/whte

CoeBo Thckess T


aBCdE

0.0780.0980.1180.1380.157

2.02.53.03.54.0

Coe Le we Legth y


Coe Elstoe Flle Cble Oto

Fn

Elstoe Flle (Cble s lle th elstoe o . o 2 eet o seso e o cble)no Elstoe Fll o Cble

CoeSeso Bo wth w


0000 Sec 0.001 ch ceets (0.285 ches = 0285)


1103 p2C 1200 3S C 120 F 0285 Exle pt nube

w

Ly

4


46/82




FMC US

APPROVED

OveveFiberglass insulated wire wound RTD with Teon/Polyimide lead wires/CableWire wound element averages the temperature measurement over its sensitive lengthUsed in electric motors and generators or continuous sensing o the stator windings temperatureDesigned or use in hazardous areas where ammable gas may be presentRated or Class H (180C) continuous usePlatinum 100/0.00385, Platinum 100/0.00392, Nickel 120/0.00672, Copper 10/0.00427 ohmresistance curvesEC-type certifcate FM 11 ATEX 0029 UThis sensor meets the requirements or electrical devices used in hazardous locations o Group II,Category 2 and is marked with an Ex in accordance with:


rtgs:



Secctos:








43


47/82




FMC US

APPROVED

Coe aTEX aove we wou Stto Sesos o icese Set


110011011102

Stto Seso th rbbo CbleStto Seso th pTFE isulte ivul Le wesStto Seso th pole isulte ivul Le wes

5000 Vc1000 Vc1000 Vc



p2dp2CG2CC1dn3C

10010010010120


+/-0.2%+/-0.5%+/-0.5%+/-0.2%+/-0.5%

0.003850.003850.003920.004270.00672

Coe Bo Legth L (6 ch mu)

0000 Sec 0.01 ch ceets (12 ches = 1200)


2S3S4S


re/whtere/whte/whte

re/re/whte/whte

CoeBo Thckess T


aBCdE

0.0780.0980.1180.1380.157

2.02.53.03.54.0

Coe Le we Legth y


Coe

Seso Bo wth w


0000 Sec 0.001 ch ceets (0.285 ches = 0285)


1100 p2C 1200 3S C 120 0285 Exle pt nube

w

Ly

4


48/82


ATEX/FM (US/Canada) Approved Bearing RTD for Increased SafetyTip Sensitive RTD

Clsses 1180,1181,1182,1190,1191,1192wiTH STandard LEad wirES Or OpTiOnaL CaBLE

FMC US

APPROVED

OveveCopper tipped construction or ast time response/reduced stem conduction errorUsed to continuously monitor the temperatures o motor/generator shat bearingsDesigned or use in hazardous areas where ammable gas may be presentRated or Class H (180C) continuous usePlatinum 100/0.00385, Platinum 100/0.00392, Nickel 120/0.00672, Copper 10/0.00427 ohmresistance curvesEC-type certifcate FM 11 ATEX 0029 UThis sensor meets the requirements or electrical devices used in hazardous locations o Group II,Category 2 and is marked with an Ex in accordance with:

EN60079-0:2009GeneralRequirements EN60079-7:2007IncreasedSafetye

rtgs:



Secctos:


Seso sheth s 316 stless steel th sele coe t


delectc stegth: 500 VaC t 60HZ th 1a xu lekge cuet


Seso etes: 0.188, 0.215, 0.250 ches, 6

Secl cotos o use: Seso sheth seso le es/cble ust be otecte th eclosue th u ip54 tg

45


49/82


Coe Sg Loe Beg Sesos o icese Set/no-Skg alctos

118011811182119011911192

Beg Seso th Coe T, pTFE Le wesBeg Seso th Coe T, Jckete CbleBeg Seso th Coe T, Shele Jckete CbleBeg Seso th Coe T, pTFE Le wes, pTFE Sheth isoltoBeg Seso th Coe T, Jckete Cble, pTFE Sheth isoltoBeg Seso th Coe T, Shele Jckete Cble, pTFE Sheth isolto

CoeCoguto


p2dp2CG2Cn3C

100100100120

pltupltupltu

nckel

+/-0.2%+/-0.5%+/-0.5%+/-0.5%

0.003850.003850.003920.00672

Coe

Le we/Eleet Coguto

Le we Cout Colo Coe

2S3S4S2d3d4d

To we Les - Sgle EleetThee we Les - Sgle EleetFou we Les - Sgle EleetTo we Les - dul Eleet

Thee we Les - dul EleetFou we Les - dul Eleet

re/whtere/whte/whte

re/re/whte/whtere/whte//re/whte

re/whte/whte//Blue/yello/yellore/re/whte/whte//Blue/Blue/yello/yello

Coe Sheth Legth L

0000 Sec iches (12 ches = 1200)

Coe Seso dete d

BCdE

0.188 (ch)0.250 (ch)0.215 (ch)6 ()

Coe Le we Legth y000 Sec iches (120 ches = 120)


1181 p2C 3S 1200 C 120 Exle pt nube

y L

d

COppEr Tip

ATEX/FM (US/Canada) Approved Bearing RTD for Increased SafetyTip Sensitive RTD

Clsses 1180,1181,1182,1190,1191,1192wiTH STandard LEad wirES Or OpTiOnaL CaBLE

FMC US

APPROVED

4


50/82


Surface Mount SensorsSurface Mount RTD, Silicone Rubber

Clss 320STandard dUTy, EXTErnaL windinGS

Clss 320 Oveve Suce mout rTds, Slcoe rubbeSurace Mount style RTDs are at, exible, rectangular sensors with a sensing element laminated in siliconerubber. They are used to monitor or measure temperature on round or uneven suraces. For motor andgenerator applications, they are commonly used in the end turns o the windings.

Manuactured with plotted element style. A plotted element allows or measuring the average temperatureover an extended area. Consult actory or urther assistance or your specifc needs.

atol Secctos

St Le we Guge:

Sgle eleet: 24 awGdul eleet: 26 awG

delectc Stegth:1,000 volts rmS @ 60 Hz, o oe ute, eleet to oute suces, th 1 a xu lekge cuet

alcto Teetue rge:plotte eleet: -50C to 200C (goo o cuve suces)

Stock Otos:m szes e vlble o stock o e c custoze to eet ou secctos


Options:Lead wire length and stainless steel overbraid options are available. In addition, these sensors maybe ordered with or without adhesive backing.

FaQ

Can the adhesive backing be used or

permanent mounting o the sensor?

The pressure sensitive adhesive (PSA) is meantto hold the sensor in place until secured bypermanent means such as adhesive tape or a

banding strap.

47


51/82


320 Suce mout rTd, Slcoe rubbe

Coe Teetue rge


CoeCoguto


p2CG2CC1dn3C

pltupltuCoenckel

100 Oh +/-.5% t 0C100 Oh +/-.5% t 0C10 Oh +/-.2% t 25C120 Oh +/-.5% t 0C

.00385

.00392

.00427

.00672

CoeEleet Coguto

Lees Colo Coe

aBC

To we, SgleThee we, SgleThee we, dul

re/whtere/whte/whte

re/whte/whte // Blue/yello/yello

Coe y Lee Legth


Coe Lee mtel

aC

TefoTefo Lees th Stless Steel Oveb

Coe moutg Oto

12

no ahesve (St)ahesve Bckg


320 m p2C B 012 a 1 Exle pt nube

Surface Mount SensorsSurface Mount RTD, Silicone Rubber

Clss 320STandard dUTy, EXTErnaL windinGS

2.0

.38

y

.06

4


52/82


Surface Mount SensorsSurface Mount RTD, Polyimide/Acrylic Lamination

Clss 321USaGE pOinT: End windinGS, LOw impaCT rESiSTanCE

Clss 321 Oveve Suce mout rTds, pole/aclc LtoSurace Mount style RTDs are at, exible, rectangular sensors with a sensing element laminated in polyimide/acrylic.They are used to monitor or measure temperature on round or uneven suraces. For motor and generator applications,they are commonly used in the end turns o the windings.

While this sensor is great or curved surace and external windings, it is not recommended or use in slots or areas whereimpact or pressure are present. Consult actory or urther assistance or your specifc needs.

atol Secctos

St Le we Guge:Sgle eleet: 24 awG

dul eleet: 26 awG


alcto Teetue rge:plotte eleet: -50C to 155C

istllto:i ost cses suce outs e fexble. Hoeve, ech esg s eet. Co seso fexblt o tooutg.

Suce out sesos c be uctue th hesve bckg to hol seso lce ugstllto. Hoeve, tol os o outg e essetl o log te heso. Hgh teetuete, rTV ceet, bg cls ole te e ll ecoee solutos o log te outg.



Options:Adhesive backing, lead wire length and stainless steel overbraid options are available.

FaQ

Are Kapton and Silicone Rubber surace mounts

interchangeable?

Both styles are an excellent choice or measuring end windingtemperature. The only dierence aside rom material is thetemperature rating. Kapton is more cut resistant and has

excellent dielectric strength. Silicone is soter and more pliable.

49


53/82


Surface Mount SensoSurface Mount RTD, Polyimide/Acrylic Laminati

Clss 3USaGE pOinT: End windinGS, LOw impaCT rESiSTa

321 Suce mout rTd, pole/aclc

Coe Teetue rge


CoeCoguto


p2CG2CC1dn3C

pltupltuCoenckel

100 Oh +/-.5% t 0C100 Oh +/-.5% t 0C10 Oh +/-.2% t 25C120 Oh +/-.5% t 0C

.00385

.00392

.00427

.00672

CoeEleet Coguto

Lees Colo Coe

aBC

To we, SgleThee we, SgleThee we, dul

re/whtere/whte/whte

re/whte/whte // Blue/yello/yello

Coe y Lee Legth


Coe Lee mtel

aB

TefoKto

Coe moutg Oto

12




1.25

.50

.055y

5


54/82


Surface Mount SensorsSurface Mount RTD, Polyimide/FEP Laminated

Clss 322HEaVy dUTy, STaTOr windinGS

Clss 322 Oveve Suce mout rTds, pole/FEp LtePolyimide/FEP laminated surace mount RTDs are at, rigid, rectangular sensors with a wound elementlaminated between polyimide/FEP adhesive. The result is an extremely rugged design that can easily beinserted into the end turns o the windings o a motor or generator to provide additional protection againstthermal overload.

While primarily designed or use in motors or generators, they can also be used in other severe servicetemperature monitoring applications or in the feld as a replacement or ailed temperature sensors.

Please note, these laminated surace mount RTDs are airly rigid with minimal exibility. I you need a sensorto conorm to a round or uneven surace, consider our Class 320 or 327 surace mount RTDs laminated in

silicone rubber.

atol Secctos

St Le we Guge:Sgle eleet: 24 awG

Te Costt (tcl te ovg t 1 ete e seco):0.17 seco


alcto Teetue rge:-50C to 220C


Options:Lead wire length and stainless steel overbraid options are available. In addition, these sensors maybe ordered with or without adhesive backing allowing or temporary placement during installation.

51

FaQ

In this case, what is meant by a rugged

design?

The polyimide/FEP design is durable enough toallow or rough handling during installationand long term protection o the element once

installed.


55/82



Clss 322HEaVy dUTy, STaTOr windinGS

322 Suce mout rTd, pole/FEp Lte

Coe Teetue rge


CoeCoguto


p2CG2C

pltupltu

100 Oh +/-.5% t 0C100 Oh +/-.5% t 0C

.00385

.00392

CoeEleet Coguto

Lees Colo Coe

aB


re/whtere/whte/whte

Coe y Lee Legth


Coe Lee mtel

aC

TefoTefo Lees th Stless Steel Oveb

Coe moutg Oto

12




1.25

.50

y .06

5


56/82


Surface Mount SensorsMini-Surface Mount RTD, Polyimide/FEP Laminated

Clss 323USaGE pOinT: End windinGS, EmBEdmEnT, nO impaCT rESiSTanCE

Clss 323 Oveve m Suce mout rTds, pole/FEp LteSurace Mount style RTDs are at, semi-exible, rectangular sensors with a sensing element laminated in polyimide/FEP.They are used to monitor or measure temperature on round or uneven suraces. For motor and generator applications,they are commonly used in the end turns o the windings.

When limited space is a concern the class 323 is more oten than not the suitable sensor choice or the application.With its overall dimensions o .2 x .6 this sensor is typically used as an embedment sensor, although it is suitable or awide variety o applications. Consult actory or urther assistance or your specifc needs.

atol Secctos

St Le we Guge:



alcto Teetue rge:Th Fl eleet: -50C to 250C





Options:Adhesive backing, lead wire length and stainless steel overbraid options are available.

FaQ

What type o voltage does an RTD ouput?

An RTD is a passive device. It does not produce an outputon its own. External electronic devices are used to measurethe resistance o the sensor by passing a small electricalcurrent through the sensor to generate a voltage.

53


57/82


Surface Mount SensorsMini-Surface Mount RTD, Polyimide/FEP Laminated

Clss 323USaGE pOinT: End windinGS, EmBEdmEnT, nO impaCT rESiSTanCE


Coe Teetue rge


CoeCoguto


p2CG2C

pltupltu

100 Oh +/-.5% t 0C100 Oh +/-.5% t 0C

.00385

.00392

CoeEleet Coguto

Lees Colo Coe

aB


re/whtere/whte/whte

Coe y Lee Legth


Coe Lee mtel

a Tefo

Coe moutg Oto

12




.079

.20

.60y

5


58/82



Clss 324USaGE pOinT: SLOTS, End windinGS, EmBEdmEnT, impaCT rESiSTanCE

Clss 324 Oveve Suce mout rTds, pole/FEp LteSurace Mount style RTDs are at, rigid, rectangular sensors with a sensing element laminated in polyimide/FEP. They areused to monitor or measure temperature on round or uneven suraces. For motor and generator applications, they arecommonly used in the end turns o the windings.

When impact resistance is a requirement the class 324 is the obvious choice. This sensor has an advantage in that it is notonly virtually smash proo but small enough to ft a variety o applications. Consult actory or urther assistance or yourspecifc needs.

atol Secctos

St Le we Guge:



alcto Teetue rge:Th Fl eleet: -50C to 200C





Options:ahesve bckg, le e legth stless steel oveb otos e vlble.

FaQ

Why use a two wire sensor versus a three wire sensor?

Two wire sensors are typically used in applications whereaccuracy is not critical. Three wire sensors are built with acompensation loop to allow the measurement to actor out the

resistance o the leads.

55


59/82



Clss 324USaGE pOinT: SLOTS, End windinGS, EmBEdmEnT, impaCT rESiSTanCE


Coe Teetue rge


CoeCoguto


p2CG2Cp6B

pltupltupltu

100 Oh +/-.5% t 0C100 Oh +/-.5% t 0C

1,000 Oh +/-.5% t 0C

.00385

.00392

.00385

CoeEleet Cog

motor sensors

Documents