moshell_commands_new.docx

2
Node B Moshell Commands Ping 172.20.43.1 Ping 172.20.43.5 (Riyadh OSS) Ping 172.20.43.7 (Jeddah OSS) L+ site id(ZNJ150).log Lt all load the 3G Cabinet ala Check the alarm in Node B get radio no Show the Sectors & Carriers up & Down (Working) lh asc dbg vswr 0 get -k To Check VSWR for (asc/4) lh asc asc vswr To Check VSWR for (asc/3) cv cu Show the current cv working cv ls Show the total cv cvms st cell Show the status of Sectors (Disable & Enabled) get 10 To show the Synchronization mode cab To Show Sub rack temperature st ip To Show O&M and IUB proxy (line 2(40) & line 3(41)) Proxy 40(IUB) & Proxy 41(O&M) Lset proxy# vid ….. To Change VLAN ID acc 0 manualrestart restart cabinet 1 enter 2 enter 3 enter 123 enter Bl block ru than proxy no

Upload: shahzad-ahmed

Post on 29-Nov-2015

52 views

Category:

Documents


5 download

DESCRIPTION

moshell

TRANSCRIPT

Page 1: Moshell_Commands_new.docx

Node B Moshell Commands

Ping 172.20.43.1

Ping 172.20.43.5 (Riyadh OSS)

Ping 172.20.43.7 (Jeddah OSS)

L+ site id(ZNJ150).log

Lt all load the 3G Cabinet

ala Check the alarm in Node B

get radio no Show the Sectors & Carriers up & Down (Working)

lh asc dbg vswr 0 get -k To Check VSWR for (asc/4)

lh asc asc vswr To Check VSWR for (asc/3)

cv cu Show the current cv working

cv ls Show the total cv

cvms

st cell Show the status of Sectors (Disable & Enabled)

get 10 To show the Synchronization mode

cab To Show Sub rack temperature

st ip To Show O&M and IUB proxy (line 2(40) & line 3(41))

Proxy 40(IUB) & Proxy 41(O&M)

Lset proxy# vid ….. To Change VLAN ID

acc 0 manualrestart restart cabinet

1 enter

2 enter

3 enter

123 enter

Bl block ru than proxy no

deb on block ru proxy no

Page 2: Moshell_Commands_new.docx

lt all load all MOs

S+ get ru sr. no

St ru will get ruw proxy no (on serial) for cab 6201

St plug will get ru proxy no (on serial) cab for 3206

LTE commons (DUL)

Lga to get log file

Lge to get event log file

Acc 0 manualrestart restart DUL

0 enter

0 enter

0 enter

ST rru get proxy

Get . vid you get v id

St ip you find interface proxy.

St interface=1 change vid for traffic

St interface=2 change vid for O&M

.