monochrome tube cw - vetas ledtraxon uses automatically binned leds on its products, thereby...

LED CHARACTERISTICS Because LEDs are semiconductor devices, their performances are subject to inherent variability commonly found in semiconductor industry. To improve consistency in performance across the same product, LED manufacturers “sort” LEDs into bins according to different preset parameters, such as forward driving voltage, illumination, etc. Whereas binning is a sorting function, it is not a correction process. Inherent variability in the manufacturing process results always in different binning distributions according to different production lots. Traxon uses automatically binned LEDs on its products, thereby minimizing output variations within the model range.As with all electronic devices, LED output degrades over time – a term called lumen depreciation. This also explains why it is nearly impossible to expect photometric performances of two LED products with different service life spans to be the same. The rate of LED degrade is a complicate function of many factors such as operating efficiency, duration of continuous operation, and more significantly, environmental conditions (ambient temperature for example). If allowed working under optimal operating temperature range and with good ventilation, LED devices enjoy long service lives over conventional light sources. When using/installing LED devices, care should be taken to ensure that the devices will operate within the operating conditions specified in respective product literature.

WWW.TRAxonTECHnoLogIES.Com©2012 TRAxon TECHnoLogIES ALL RIgHTS RESERvED. TRAxon™, Tx ConnECT™, LuxILED™ ARE TRADEmARkS of TRAxon TECHnoLogIES. u.S. pATEnTS, E.u. pATEnTS, jApAn pATEnTS, oTHER pATEnTS pEnDIng. SpECIfICATIonS ARE SuBjECT To CHAngE WITHouT noTICE.

06/12 v1.0

monochrome Tube CW

Tu.Dm.0060000Tu.Dm.0160000Tu.Dm.0260000

The Traxon monochrome Tube CW is an Ip66-rated slim LED tube for any wall or façade accent-lighting. Available in 500mm, 995mm, and 1490mm lengths, the simple but robust construction, allows up to 24, 12, or 8 Tubes (12m) to be daisy chained using a single power supply.

pRoDuCT SpECIfICATIonS

• Models: Tu.Dm.0060000 - 500mm (48 LEDs) Tu.Dm.0160000 - 995mm (96 LEDs) Tu.Dm.0260000 - 1490mm (144 LEDs)

• Light Source: High intensity SmD white LEDs

• Color Temperature: 5500 k (Cold White)

• Luminous Flux: Tu.Dm.0160000 - 166.24 lm

• Efficacy: Tu.Dm.0160000 - 22.2 lm/W

• Cover Lens: pC Diffuser (CAST-uv protected)

• Housing: Aluminium housing, pC front diffuser

• Adjustment Options: –

• Size: 500mm/19.7” , 995mm/39.2”, 1490mm/58.7” (L) x 17mm / 0.67” (W) x 20mm / 0.79” (H)

• Weight: Tu.Dm.0060000 - 270g/0.59lbs Tu.Dm.0160000 - 520g/1.14lbs Tu.Dm.0260000 - 750g/1.65lbs

• Regulatory Listing & Safety Approval: CE, cETLus

• Operating Temperature: –20°C to +50°C / –4°f to +122°f

• Storage Temperature: –40°C to +70°C / –40°f to +158°f

• Environment: outdoor (Ip66)

• Humidity: 0~90%, non-condensing

ELECTRICAL SpECIfICATIonS

• Operating Voltage: 48v DC

• Current Rating: Tu.Dm.0060000 - 76mA max Tu.Dm.0160000 - 152mA max. Tu.Dm.0260000 - 227mA max.• Power Consumption: Tu.Dm.0060000 - 3.7W max. Tu.Dm.0160000 - 7.5W max. Tu.Dm.0260000 - 11W max. (approx. 7.5W per tube meter)

SySTEm SpECIfICATIonS

• Power/Data Interface: –

• Control: optional Dimming with Dmx2pWm Dimmer

• Power Supply: LED Engine 100W 48v Indoor (TE.Cu.0000002), LED Engine 100W 48v outdoor (pS.Cu.0000007)

• Addressing Options: –

monochrome Tube CW


06/12 v1.0

Photometrics

SouRCE SpECIfICATIonS

Source: 96 LEDs Cold White in 995m tube with pC diffuser

Optics: -

Cover Lens: White translucent pC Diffuser

CCT: 5500 k – Cold white

CAnDELA DISTRIBuTIon LIgHT ouTpuT

ColorLuminous

Flux (lumens)

White 166.24

ILLumInAnCE AT A DISTAnCE

IES and LDT files are available for download from the Traxon website

0° 15° 30° 45°

90°

75°

60°

22.13

Cd: 0

33.20

44.27

55.33

11.07

2m

4m

6m

8m

10m

12m

For feet multiply by 3.28

Center Beam LUXBeam WidthV

6.2m

12.3m

18.5m

24.7m

30.9m

37.0m

13.74

3.44

1.53

0.86

0.55

0.38

H

6.8m

13.6m

20.4m

27.2m

34.0m

40.8m

For fc divide by 10.7

Vert.Spread: 114.2°Horiz.Spread: 119.2°

monochrome Tube CW


06/12 v1.0

Dimensions

TECHnICAL DRAWIng

17mm / 0.67”

See DETAIL A

21.1

mm

/ 0.

83”

105mm / 4.13” ref.

25mm / 0.98”

M6 x 15mm / 0.59”

Mounting stud

150mm / 5.91”

DETAIL A – with mounting stud

Optional mounting bracket (not included)(TU.AC.0100400)

DETAIL A – with mounting bracket

25m

m/0

.98”

105mm/4.13” ref.

Mounting bracket

11.10mm/0.44”

28mm/1.10”

TU.DM.0060000: 500mm / 19.7”TU.DM.0160000: 995mm / 39.2”TU.DM.0260000: 1490mm / 58.7”

Center mounting stud(TU.DM.0260000 only)

Center mounting bracket(TU.DM.0260000 only)

monochrome Tube CW


06/12 v1.0

Mounting

mounTIng

Mounting Stud Method

Mounting Bracket Method

1

2

1

2

Rotate mounting stud anti-clockwise and remove from housing

Assemble mounting bracket as shown


mounting Bracket(Tu.AC.0100400)

1

2



20.1mm/0.79”

25m

m/0

.98”

28mm/1.10”

30mm/1.18”

20.1mm/0.79”

25m

m/0

.98”

28mm/1.10”

30mm/1.18”


monochrome Tube CW


06/12 v1.0

System Diagram

SySTEm DIAgRAm

Typical wiring with T-Starter cable and Single Starter cableA

C 1

10V

/220

V 5

0/60

Hz

LED

Eng

ine

100W

48V

Indo

orTE

.CU

.000

0002

AW

G 1

8 x

2C, 3

00m

m

AW

G 1

8 x

2C

T-S

tart

er C

able

Opt

ion

Sin

gle

Sta

rter

Cab

le O

ptio

n

T-S

TAR

TER

CA

BLE

TE.C

U.0

0000

03 (A

WG

20

x 2C

, 0.6

m)

Max

. 24

x 50

0mm

tube

or

12

x 99

5mm

tube

or

8 x

149

0mm

tube

or a

com

bina

tion

of d

iffer

ent l

engt

hs to

tallin

g le

ss th

an 1

2 m

eter

s

AC

Pow

er C

ord

PS.A

C.x

xxxx

xx

Term

inal

blo

ck(n

ot in

clud

ed)

T-S

tart

er C

able

at c

ente

r:To

tal l

ead

cabl

e le

ngth

: 14

met

ers

max

.if

max

imum

num

ber

of T

ubes

con

nect

ed

20 m

eter

s m

ax.

LED

Eng

ine

to la

st T

ube

Tota

l Tub

e le

ngth

: 12

met

ers

max

.

IP66

CO

NN

EC

TOR

SE

AL

IP66

CO

NN

EC

TOR

SE

AL

IP66

EN

D C

AP

SE

AL

ON

LA

ST

TUB

E

Con

nect

or E

nd C

apTU

.AC

.010

0100

IND

OO

RO

UTD

OO

R

AC 110V/220V 50/60Hz

LED

Eng

ine

100W

48V

Indo

orTE

.CU

.000

0002

AC

Pow

er C

ord

PS.A

C.x

xxxx

xx

Sta

rter

Cab

le

TE.C

U.0

0000

04A

WG

20

x 2C

IP66

EN

D C

AP

SE

AL

ON

LA

ST

TUB

E

Con

nect

or E

nd C

apTU

.AC

.010

0100

IND

OO

R

OU

TDO

OR

monochrome Tube CW


06/12 v1.0

System Diagram

SySTEm DIAgRAm

Monochrome Tube with optional DMX2PWM Dimmer

AC

110

V/2

20V

50/

60H

z

LED

Eng

ine

100W

48V

Indo

orTE

.CU

.000

0002

AC

Pow

er C

ord

PS.A

C.x

xxxx

xx

Max

. 12m

of t

ube

per

DM

X2P

WM

Dim

mer

DM

X2P

WM

Dim

mer

1601

25

20 m

eter

s m

ax.

LED

Eng

ine

to la

st T

ube

IP66

CO

NN

EC

TOR

SE

AL

IP66

EN

D C

AP

SE

AL

ON

LA

ST

TUB

E

Con

nect

or E

nd C

apTU

.AC

.010

0100

IND

OO

RO

UTD

OO

R

Sta

rter

Cab

le

TE.C

U.0

0000

04A

WG

20

x 2C

, 10m

Ligh

t-Driv

e JO

G D

W(S

C.J

D.5

0100

00) B

LAC

K(S

C.J

D.5

0101

00) W

HIT

E

Opt

iona

l Con

trolle

rs

CO

NTR

OLL

ERPo

wer

ed fr

om D

MX2

PWM

Dim

mer

Exa

mpl

e of

max

. num

ber

of fi

xtur

es p

er D

MX2

PW

M D

imm

er:

1 ou

tput

: 12

x 1

m T

ube

or 8

x 1

.5m

Tub

es3

outp

uts:

4

x 1m

Tub

e or

2 x

1.5

m T

ubes

(per

out

put) B

utle

r(1

6000

1)

CO

NTR

OLL

ER51

2 D

MX

Cha

nnel

s pe

r out

put

monochrome Tube CW


06/12 v1.0

Accessories

Tx ConnECT

Model No. Description

TE.Cu.0000003 monochrome Tube T-starter Cable (open Wire), 0.6m

TE.Cu.0000004 monochrome Tube Starter Cable (open Wire), 10m

Tu.AC.0100200 monochrome Tube Interconnection Cable, 1.5m

Tu.AC.0100100 Connector End Cap

opTIonAL ACCESSoRIES


Tu.AC.0100400 monochrome Tube mounting Bracket (25mm), 2pcs

Tx ConTRoL


160125 Dmx2pWm 3CH Dimmer

160001 Butler (optional)

SC.jD.5010000) Light-Drive jog DW (Black) (optional)

SC.jD.5010100) Light-Drive jog DW (White) (optional)

Tx poWER


TE.Cu.0000002 LED Engine 100W Indoor 48v

pS.Cu.0000007 LED Engine 100W outdoor 48v

LED CHARACTERISTICS Because LEDs are semiconductor devices, their performances are subject to inherent variability commonly found in semiconductor industry. To improve consistency in performance across the same product, LED manufacturers “sort” LEDs into bins according to different preset parameters, such as forward driving voltage, illumination, etc. Whereas binning is a sorting function, it is not a correction process. Inherent variability in the manufacturing process results always in different binning distributions according to different production lots. Traxon uses automatically binned LEDs on its products, thereby minimizing output variations within the model range.As with all electronic devices, LED output degrades over time – a term called lumen depreciation. This also explains why it is nearly impossible to expect photometric performances of two LED products with different service life spans to be the same. The rate of LED degrade is a complicate function of many factors such as operating efficiency, duration of continuous operation, and more significantly, environmental conditions (ambient temperature for example). If allowed working under optimal operating temperature range and with good ventilation, LED devices enjoy long service lives over conventional light sources. When using/installing LED devices, care should be taken to ensure that the devices will operate within the operating conditions specified in respective product literature.


06/12 v1.0

monochrome Tube WW

Tu.Dm.0070000Tu.Dm.0170000Tu.Dm.0270000

The Traxon monochrome Tube WW is an Ip66-rated slim LED tube for any wall or façade accent-lighting. Available in 500mm, 995mm, and 1490mm lengths, the simple but robust construction, allows up to 24, 12, or 8 Tubes (12m) to be daisy chained using a single power supply.

pRoDuCT SpECIfICATIonS

• Models: Tu.Dm.0070000 - 500mm (48 LEDs) Tu.Dm.0170000 - 995mm (96 LEDs) Tu.Dm.0270000 - 1490mm (144 LEDs)

• Light Source: High intensity SmD white LEDs

• Color Temperature: 2700 k (Warm White)

• Luminous Flux: Tu.Dm.0170000 - 149.25 lm

• Efficacy: Tu.Dm.0170000 - 19.9 lm/W

• Cover Lens: pC Diffuser (CAST-uv protected)

• Housing: Aluminium housing, pC front diffuser

• Adjustment Options: –

• Size: 500mm/19.7” , 995mm/39.2”, 1490mm/58.7” (L) x 17mm / 0.67” (W) x 20mm / 0.79” (H)

• Weight: Tu.Dm.0070000 - 270g/0.59lbs Tu.Dm.0170000 - 520g/1.14lbs Tu.Dm.0270000 - 750g/1.65lbs

• Regulatory Listing & Safety Approval: CE, cETLus

• Operating Temperature: –20°C to +50°C / –4°f to +122°f

• Storage Temperature: –40°C to +70°C / –40°f to +158°f

• Environment: outdoor (Ip66)

• Humidity: 0~90%, non-condensing

ELECTRICAL SpECIfICATIonS

• Operating Voltage: 48v DC

• Current Rating: Tu.Dm.0070000 - 76mA max Tu.Dm.0170000 - 152mA max. Tu.Dm.0270000 - 227mA max.• Power Consumption: Tu.Dm.0070000 - 3.7W max. Tu.Dm.0170000 - 7.5W max. Tu.Dm.0270000 - 11W max. (approx. 7.5W per tube meter)

SySTEm SpECIfICATIonS

• Power/Data Interface: –

• Control: optional Dimming with Dmx2pWm Dimmer

• Power Supply: LED Engine 100W 48v Indoor (TE.Cu.0000002), LED Engine 100W 48v outdoor (pS.Cu.0000007)

• Addressing Options: –

monochrome Tube WW


06/12 v1.0

Photometrics

SouRCE SpECIfICATIonS

Source: 96 LEDs Warm White in 995m tube with pC diffuser

Optics: -

Cover Lens: White translucent pC Diffuser

CCT: 2700 k – Warm white (designed)

CAnDELA DISTRIBuTIon LIgHT ouTpuT

ColorLuminous

Flux (lumens)

White 149.25

ILLumInAnCE AT A DISTAnCE

IES and LDT files are available for download from the Traxon website

0° 15° 30° 45°

90°

75°

60°

19.87

Cd: 0

29.80

39.73

49.66

9.93

2m

4m

6m

8m

10m

12m

For feet multiply by 3.28

Center Beam LUXBeam WidthV

6.0m

11.9m

17.9m

23.9m

29.8m

35.8m

12.42

3.10

1.38

0.78

0.50

0.34

H

6.7m

13.5m

20.2m

27.0m

33.7m

40.5m

For fc divide by 10.7

Vert.Spread: 112.4°Horiz.Spread: 118.8°

monochrome Tube WW


06/12 v1.0

Dimensions

TECHnICAL DRAWIng

17mm / 0.67”

See DETAIL A

21.1

mm

/ 0.

83”

105mm / 4.13” ref.

25mm / 0.98”

M6 x 15mm / 0.59”

Mounting stud

150mm / 5.91”

DETAIL A – with mounting stud

Optional mounting bracket (not included)(TU.AC.0100400)

DETAIL A – with mounting bracket

25m

m/0

.98”

105mm/4.13” ref.

Mounting bracket

11.10mm/0.44”

28mm/1.10”

TU.DM.0070000: 500mm / 19.7”TU.DM.0170000: 995mm / 39.2”TU.DM.0270000: 1490mm / 58.7”

Center mounting stud(TU.DM.0270000 only)

Center mounting bracket(TU.DM.0270000 only)

monochrome Tube WW


06/12 v1.0

Mounting

mounTIng

Mounting Stud Method

Mounting Bracket Method

1

2

1

2



20.1mm/0.79”

25m

m/0

.98”

28mm/1.10”

30mm/1.18”



mounting Bracket(Tu.AC.0100400)

1

2



20.1mm/0.79”

25m

m/0

.98”

28mm/1.10”

30mm/1.18”

monochrome Tube WW


06/12 v1.0

System Diagram

SySTEm DIAgRAm

Typical wiring with T-Starter cable and Single Starter cableA

C 1

10V

/220

V 5

0/60

Hz

LED

Eng

ine

100W

48V

Indo

orTE

.CU

.000

0002

AW

G 1

8 x

2C, 3

00m

m

AW

G 1

8 x

2C

T-S

tart

er C

able

Opt

ion

Sin

gle

Sta

rter

Cab

le O

ptio

n

T-S

TAR

TER

CA

BLE

TE.C

U.0

0000

03 (A

WG

20

x 2C

, 0.6

m)

Max

. 24

x 50

0mm

tube

or

12

x 99

5mm

tube

or

8 x

149

0mm

tube

or a

com

bina

tion

of d

iffer

ent l

engt

hs to

tallin

g le

ss th

an 1

2 m

eter

s

AC

Pow

er C

ord

PS.A

C.x

xxxx

xx

Term

inal

blo

ck(n

ot in

clud

ed)

T-S

tart

er C

able

at c

ente

r:To

tal l

ead

cabl

e le

ngth

: 14

met

ers

max

.if

max

imum

num

ber

of T

ubes

con

nect

ed

20 m

eter

s m

ax.

LED

Eng

ine

to la

st T

ube

Tota

l Tub

e le

ngth

: 12

met

ers

max

.

IP66

CO

NN

EC

TOR

SE

AL

IP66

CO

NN

EC

TOR

SE

AL

IP66

EN

D C

AP

SE

AL

ON

LA

ST

TUB

E

Con

nect

or E

nd C

apTU

.AC

.010

0100

IND

OO

RO

UTD

OO

R

AC 110V/220V 50/60Hz

LED

Eng

ine

100W

48V

Indo

orTE

.CU

.000

0002

AC

Pow

er C

ord

PS.A

C.x

xxxx

xx

Sta

rter

Cab

le

TE.C

U.0

0000

04A

WG

20

x 2C

IP66

EN

D C

AP

SE

AL

ON

LA

ST

TUB

E

Con

nect

or E

nd C

apTU

.AC

.010

0100

IND

OO

R

OU

TDO

OR

monochrome Tube WW


06/12 v1.0

System Diagram

SySTEm DIAgRAm

Monochrome Tube with optional DMX2PWM Dimmer

AC

110

V/2

20V

50/

60H

z

LED

Eng

ine

100W

48V

Indo

orTE

.CU

.000

0002

AC

Pow

er C

ord

PS.A

C.x

xxxx

xx

Max

. 12m

of t

ube

per

DM

X2P

WM

Dim

mer

DM

X2P

WM

Dim

mer

1601

25

20 m

eter

s m

ax.

LED

Eng

ine

to la

st T

ube

IP66

CO

NN

EC

TOR

SE

AL

IP66

EN

D C

AP

SE

AL

ON

LA

ST

TUB

E

Con

nect

or E

nd C

apTU

.AC

.010

0100

IND

OO

RO

UTD

OO

R

Sta

rter

Cab

le

TE.C

U.0

0000

04A

WG

20

x 2C

, 10m

Ligh

t-Driv

e JO

G D

W(S

C.J

D.5

0100

00) B

LAC

K(S

C.J

D.5

0101

00) W

HIT

E

Opt

iona

l Con

trolle

rs

CO

NTR

OLL

ERPo

wer

ed fr

om D

MX2

PWM

Dim

mer

Exa

mpl

e of

max

. num

ber

of fi

xtur

es p

er D

MX2

PW

M D

imm

er:

1 ou

tput

: 12

x 1

m T

ube

or 8

x 1

.5m

Tub

es3

outp

uts:

4

x 1m

Tub

e or

2 x

1.5

m T

ubes

(per

out

put) B

utle

r(1

6000

1)

CO

NTR

OLL

ER51

2 D

MX

Cha

nnel

s pe

r out

put

monochrome Tube WW


06/12 v1.0

Accessories

Tx ConnECT


TE.Cu.0000003 monochrome Tube T-starter Cable (open Wire), 0.6m

TE.Cu.0000004 monochrome Tube Starter Cable (open Wire), 10m

Tu.AC.0100200 monochrome Tube Interconnection Cable, 1.5m

Tu.AC.0100100 Connector End Cap

opTIonAL ACCESSoRIES


Tu.AC.0100400 monochrome Tube mounting Bracket (25mm), 2pcs

Tx ConTRoL


160125 Dmx2pWm 3CH Dimmer

160001 Butler (optional)

SC.jD.5010000) Light-Drive jog DW (Black) (optional)

SC.jD.5010100) Light-Drive jog DW (White) (optional)

Tx poWER


TE.Cu.0000002 LED Engine 100W Indoor 48v

pS.Cu.0000007 LED Engine 100W outdoor 48v

monochrome tube cw - vetas ledtraxon uses automatically binned leds on its products, thereby...

Documents