mohawk trail - windham fabrics · cut templates wof or lof. use the quilt cover image as your...

Mohawk TrailDesigned by Natalie Crabtree

Featuring Horizon by Grant Haffnersize: 40” x 40”

windhamfabrics.com02.01.20

e: [email protected] p: 201-659-0444 • f: 201-659-9719

this is a digital representation of the quilt top, fabric may vary.

FREEPROJECT

please note: before making your project, check for any pattern updates at windhamfabrics.com’s free projects section.

Mohawk Trail

1

windhamfabrics.com

KEY FABRIC SKU YD CUTTING INSTRUCTIONS

A 51706D-X Multi ½

Cut the following templates LOF from yardage. __(Arrange before cutting to ensure they will fit onto __yards).• Landscape Template G• Landscape Template J• Landscape Template Z

B 51711D-X Multi 1

Cut the following templates LOF from yardage. __(Arrange before cutting to ensure they will fit onto __yards).• Sky Template OO• Landscape Template EE• Landscape Template KK• Landscape Template RR

C 51704D-X Multi ¼

Cut the following templates LOF from yardage. __(Arrange before cutting to ensure they will fit onto __yards).• Landscape Template PPUse the remaining yardage to fuse Road Lines 1 & 2__onto the wrong side of fabric. Place fusible web __templates LOF, and fuse into place with an iron. Cut __out Road Lines 1 & 2 on the traced line and set aside.

D 51712D-X Multi 1

Cut the following templates LOF from yardage. __(Arrange before cutting to ensure they will fit onto __yards).• Landscape Template AA• Landscape Template D• Landscape Template LL• Landscape Template K• Landscape Template QQ• Landscape Template Y

Cutting Notes: Be sure to read the entire pattern before you begin. This pattern requires appliqué techniques. Use ¼” seams unless otherwise directed. Measurements listed throughout the piecing instructions are approximate and may vary slightly.

(Designer Note: The quilt is assembled in (4) Sections – Sky Section, Landscape Section 1, Landscape Section 2 and Road Section. Please note: Some templates labeled as “Sky” or “Landscape” may be included in the Landscape or Road Sections of the quilt assembly. Sky, Landscape and Road Template names only refer to how they are featured in the quilt and how they contribute to the overall appearance of the quilt, not what pieced section they belong to.)

LOF = Length of Fabric WOF = Width of Fabric

PROJECT DISCLAIMER: Every effort has been made to ensure that all projects are error free. All the information is presented in good

faith, however, no warranty can be given nor results guaranteed. Therefore, we assume no responsibility nor damages that may occur when

referring to this pattern. When errors are brought to our attention, we make every effort to correct and post a revision as soon as

possible. We suggest you check windhamfabrics.com for pattern updates and to test the pattern prior to making the project.

Test templates first, before cutting all the pieces. Free projects are not for resale.

Mohawk Trail

2

windhamfabrics.com


E 51703D-X Multi 1¼

Cut the following templates LOF from yardage. __(Arrange before cutting to ensure they will fit onto __yards).• Sky Template A• Road Template S

F 51708D-X Multi ⅞

Cut the following templates LOF from yardage. __(Arrange before cutting to ensure they will fit onto __yards).• Landscape Template H• Road Template W

G 51705D-X Multifor binding ⅜ (5) 2¼” x WOF strips for binding.

H 51709D-X Multi 1¼

Cut the following templates LOF from yardage. __(Arrange before cutting to ensure they will fit onto __yards).• Landscape Template M• Sky Template HH

I 51707D-X Multi ⅜

Cut the following templates WOF from yardage. __(Arrange before cutting to ensure they will fit onto __yards).• Sky Template GGUse the remaining yardage to fuse Clouds 1 & 2 onto __the wrong side of fabric. Place fusible web __templates WOF, and fuse into place with an iron. __Cut out Clouds 1 & 2 on the traced line and set __aside.

J 51710D-X Multi ⅜

Cut the following templates WOF from yardage. __(Arrange before cutting to ensure they will fit onto __yards).• Road Template O• Road Template X

K 40171-8 Green/Yellowartisan cotton ⅛

Cut the following templates WOF from yardage. __(Arrange before cutting to ensure they will fit onto __yards).• Landscape Template BB

L 40171-44 Yellow/Turq.artisan cotton ⅛

Cut the following templates WOF from yardage. __(Arrange before cutting to ensure they will fit onto __yards).• Landscape Template FF

WOF = Width of Fabric

Mohawk Trail

3

windhamfabrics.com


M 40171-63 Dk./Lt.Greenartisan cotton ⅜

Cut the following templates WOF from yardage. __(Arrange before cutting to ensure they will fit onto __yards).• Landscape Template CC• Landscape Template E• Landscape Template II• Landscape Template L• Landscape Template NN

N 40171-71 Dk./Lt. Oliveartisan cotton ¼

Cut the following templates WOF from yardage. __(Arrange before cutting to ensure they will fit onto __yards).• Landscape Template DD• Landscape Template F

O 40171-31 Turq./Copperartisan cotton ½

Cut the following templates WOF from yardage. __(Arrange before cutting to ensure they will fit onto __yards).• Landscape Template I• Landscape Template JJ• Road Template P• Road Template U

P 40171-20 Aqua/Whiteartisan cotton ⅜

Cut the following templates WOF from yardage. __(Arrange before cutting to ensure they will fit onto __yards).• Sky Template C• Landscape Template N

Q 40171-58 Navy/Cyanartisan cotton ¾

Cut the following templates WOF from yardage. __(Arrange before cutting to ensure they will fit onto __yards).• Road Template Q• Road Template R• Road Template T• Road Template V

R 40171-35 Aqua/Blueartisan cotton ⅜

Cut the following templates WOF from yardage. __(Arrange before cutting to ensure they will fit onto __yards).• Sky Template B• Landscape Template MM


Mohawk Trail

4

windhamfabrics.com


S 40171-53 Walnut/Tanartisan cotton ½

Use yardage to fuse the following templates onto __the wrong side of fabric. Place fusible web __templates WOF, and fuse into place with an iron. __Cut out all templates on the traced line and set aside.• Complete sets of Telephone Pole 1-3• Wires A-N

Backing 2²⁄348” x 48” piece of batting.


Template Cutting & Taping Instructions:

• Templates used for traditional piecing are labeled as A-RR. Each printed template is labeled as “Landscape”, “Sky” or “Road” to help identify and separate templates by quilt section.

• Templates used for applique and/or thread painting are labeled as Road Lines 1-2, Clouds 1-2, Telephone Poles 1-3 and Wires A-N.

• Cut out each individual template and organize by Landscape, Sky, Road or applique. Cut out templates making sure to include the outermost printed line for the seam allowances.

• Many templates are printed across multiple pages. For example, Sky Template A is printed across multiple pages. Gather all sections for Sky Template A and tape together accordingly by matching sides. Match Side 1 with Side 1, and Side 2 with Side 2 etc. Use the large template guide printed on the template pages and in this pattern to assist you in taping together templates.

• When cutting out templates from fabric, use pins to keep the templates in place on the fabric. Some templates are too large to effectively hold in place while cutting. Pin thoroughly to decrease the chance of the template slipping. Place templates printed side up, on the right side of fabric as shown in the diagram below.

• Plan how you will cut each template. Some templates, such as Sky Template A need to be cut LOF, verses WOF to keep fabric directional. (See diagram below) Cutting instructions for Fabrics A-S indicate whether to cut templates WOF or LOF. Use the quilt cover image as your guide.

• Templates can be cut from fabric using the paper template as a guide. Or you can trace the template onto fabric with an erasable marker or chalk pencil, then cut the fabric template out with scissors or a rotary cutter.

• After cutting each fabric template, label for organization.

Mohawk Trail

5

windhamfabrics.com

Fusible Web Cutting Instructions:

• Appliqué Instructions included in this pattern are for raw edge appliqué using fusible web. It is recommended to use raw edge appliqué for the Telephone Poles and Wires due to the small size of the appliqué templates. Clouds 1 and 2 and Road Lines 1 & 2 can be created using turn under appliqué or flip & fuse methods by adding a ¼” around all sides of the template. Use your preferred method when completing appliqué. The printed size of each appliqué template is the finished size of the appliqué.

Information Regarding Wires A-N:

• Please note: Sewers may opt to complete thread painting, embroidery or use decorative stitches/quilting to create Wires A-N. Appliqué are created very thin. Some quilters may find this challenging to work with and complete. Wires A-N can be made using embroidery techniques, a zig zag stitch, thread painting or created during the quilting process. If completing the wires using thread, simply trace the shape of the wires onto the quilt top using an erasable marker or chalk pencil, then add the embellishment. Complete using the method you are most comfortable with. Remember to have fun creating this art quilt, and enjoy the creative process!

Mohawk Trail

6

windhamfabrics.com

• Cut out Clouds 1 & 2, Road Lines 1 & 2, Telephone Poles 1-3 and Wires A-N along the printed line. Trace each template onto the smooth side of fusible web with the printed side of template facing down, and the wrong side of the template facing up. (Please note: If opting to complete Wires A-N using a method other than applique, do not trace Wires A-M onto fusible web).

• Roughly cut out each fusible web template just outside of the traced line and set aside. Refer to cutting in-structions for Fabrics A-S for further direction.

Sky Section Assembly:

1. Gather the following templates for Sky Section Assembly:

1a. Sky Template A (Fabric E)

1b. Sky Template B (Fabric R)

1c. Sky Template C (Fabric P)

1d. Sky Template HH (Fabric H)

1e. Sky Template OO (Fabric B)

1f. Sky Template GG (Fabric I)

2. Lay out templates as shown in the diagram. Please note the orientation and placement of Sky Templates HH and OO. (When attaching Sky Template HH to Sky Template C, align the end of Sky Template HH with the left edge of Sky Template C for accurate piecing and placement. When attaching Sky Template OO to Sky Template HH, align the end of Sky Template OO with the left edge of Sky Template HH for accurate piecing and placement).

Sky Template A

Sky Template B

Sky Template C

Sky Template HH

Sky Template OO

Sky Template GG

Mohawk Trail

7

windhamfabrics.com

3. Once you have confirmed that the layout is correct and templates are oriented correctly, sew together using a ¼” seam. Start by sewing Sky Templates A and B together, and end by attaching Sky Template GG. Press seams downward toward Sky Template GG.

4. Once complete, the Sky Section should measure 40 ½” wide, and approximately 25 ½” on the left side and 17” on the right side.

Landscape Section 1 Assembly:

5. Gather the following templates for Landscape Section 1 Assembly:

5a. Landscape Template CC (Fabric M)

5b. Landscape Template DD (Fabric N)

5c. Landscape Template EE (Fabric B)

5d. Landscape Template FF (Fabric L)

5e. Landscape Template II (Fabric M)

5f. Landscape Template JJ (Fabric R)

5g. Landscape Template LL (Fabric D)

5h. Landscape Template MM (Fabric R)

5i. Landscape Template NN (Fabric M)

5j. Landscape Template PP (Fabric C)

5k. Landscape Template RR (Fabric B)

Mohawk Trail

8

windhamfabrics.com

6. Lay out templates as shown in the diagram.

7. Once you have confirmed that the layout is correct and templates are oriented correctly, sew together using a ¼” seam. Diagrams show Landscape Section 1 in all stages of completion. Arrows shown in the diagram indicate pressing instructions. (When attaching Landscape Template MM to Landscape Template RR, align the end of Landscape Template MM with the left edge of Landscape Template RR for accurate piecing and placement). Please note that the seam in which Landscape Templates FF and MM meet, there should be a slight peak (Fig. 1). Please note that the seam in which Landscape Templates RR and LL meet, there should be a slight valley as indicated in the diagrams (Fig. 2).

8. Once complete, Landscape Section 1 should measure approximately 18 ½” across the top, 18 ¼” across the bottom, 5” on the right side and 6” on the left side.

Mohawk Trail

9

windhamfabrics.com

Landscape Section 2 Assembly:

9. Gather the following templates for Landscape Section 2 Assembly:

9a. Landscape Template D (Fabric D)

9b. Landscape Template E (Fabric M)

9c. Landscape Template F (Fabric N)

9d. Landscape Template G (Fabric A)

9e. Landscape Template H (Fabric F)

10. Lay out templates as shown in the diagram. (When sewing Landscape Templates D-H together, begin sewing from the right side of the templates (thickest end) and moving towards the left. This ensures that templates will meet correctly at the right edge of the quilt top. Landscape Templates F and G come to a point, therefore aren’t a good indication of where to start a seam).

11. Once you have confirmed that the layout is correct and templates are oriented correctly, sew together using a ¼” seam. Start by sewing Landscape Templates D and E together, and end by attaching Landscape Template H. Press seams upward toward Landscape Template D.

12. Once complete, Landscape Section 2 should measure approximately 23 ¾” across the top, 23” across the bottom, 11” on the right side and 5” on the left side.

Mohawk Trail

10

windhamfabrics.com

Road Section Assembly:

13. Gather the following templates for Road Section Assembly:

14. Lay out the templates as shown in the diagram.

15. Once you have confirmed that the layout is correct and templates are oriented correctly, sew together using a ¼” seam. Diagrams show the Road Section in all stages of completion, with accurate order in which you sew all templates together. Please note the small sections sewn together as indicated in the diagram (Fig. 3). Arrows shown in the diagram indicate pressing instructions. (Begin sewing from the middle, Road Template T, and building upon it moving outward by attaching Road Templates R-S, Road Templates U-X and Landscape Template Y. Attach Landscape Template I last to complete the Road Section. For all tem-plates, begin sewing starting from the perimeter of the quilt, and working towards the center of the quilt. This ensures that templates will meet at the edges of the quilt top).

16. Once complete, the Road Section should measure approximately 40 ½” wide, 10” on the right side and 13 ½” on the left side.

13i. Road Template Q (Fabric Q)

13j. Road Template R (Fabric Q)

13k. Road Template S (Fabric E)

13l. Road Template T (Fabric Q)

13m. Road Template U (Fabric O)

13n. Road Template V (Fabric Q)

13o. Road Template W (Fabric F)

13p. Road Template X (Fabric J)

13q. Landscape Template Y (Fabric D)

13r. Landscape Template Z (Fabric A)

13s. Landscape Template KK (Fabric B)

13t. Landscape Template AA (Fabric D)

13u. Landscape Template BB (Fabric K)

13v. Landscape Template QQ (Fabric D)

13a. Landscape Template I (Fabric O)

13b. Landscape Template J (Fabric A)

13c. Landscape Template K (Fabric D)

13d. Landscape Template L (Fabric M)

13e. Landscape Template M (Fabric H)

13f. Landscape Template N (Fabric P)

13g. Road Template O (Fabric J)

13h. Road Template P (Fabric O)

Mohawk Trail

11

windhamfabrics.com

Mohawk Trail

12

windhamfabrics.com

Quilt Assembly (Designer Note: Diagrams show the quilt in all stages of assembly).

17. Sew Landscape Sections 1 & 2 together using a ¼” seam as shown in the diagram. Press toward Land-scape Section 1 to complete the Landscape center for the quilt top.

18. Sew the completed Landscape center of the quilt top to the Road Section. Pin the sections together thoroughly to avoid slipping. (Please note: The completed Landscape center and the Road Section are not at-tached using a perfectly straight ¼” seam. There is a slight slant to both the completed Landscape center and the Road Section. Simply, follow the natural edges of the fabrics, using an exact ¼” seam for accuracy.)

19. Press toward the completed Landscape center to complete the bottom half of the quilt top.

Mohawk Trail

13

windhamfabrics.com

20. Lay out the Sky Section and the completed bottom half of the quilt top as shown. Where Landscape Sec-tions 1 & 2 meet, there should be a valley. The bottom of the Sky Section should fit into the valley as shown. Using this as a guide, pin sections together to prepare for sewing. Pin the sections together starting from the valley and moving outward.

21. Sew the completed bottom half of the quilt top to the Sky Section. (Please note: The completed bottom of the quilt top and the Sky Section are not attached using a perfectly straight ¼” seam. There is a slight corner measuring approximately 173° located at the intersections between Landscape Sections 1 & 2 and the Sky Section. Simply pivot your needle slightly to continue the ¼” seam. Follow the natural edges of the fabrics, us-ing an exact ¼” seam for accuracy).

22. Press toward the Sky Section to complete quilt top assembly. Due to the nature of this project, the quilt top may need ‘squared up’, or the sides trimmed even. The quilt instructions have been designed to give the quilter straight edges, however results may vary from quilter to quilter. The quilt top should measure approxi-mately 40 ½” x 40 ½” unfinished, however it is best to focus on ensuring that the quilt top is a perfect square. Begin by trimming the (4) corners of the quilt top to a perfect 90° angle using a square ruler. Trim minimal fabric from the corners to avoid sizing down the quilt top significantly. Then trim the sides of the quilt top even with the corners. (Finished size is only approximate and may vary from quilter to quilter. If the quilt top has changed size dramatically, adjust the applique templates accordingly).

Mohawk Trail

14

windhamfabrics.com

Appliqué Instructions:

(Appliqué instructions are for raw edge appliqué. It is recommended to use raw edge appliqué for the Telephone Poles and Wires due to the small size of the appliqué templates. Clouds 1 and 2 and Road Lines 1 & 2 can be created using turn under appliqué or flip & fuse methods by adding a ¼” around all sides of the template. Use your preferred method when completing appliqué. The printed size of each appliqué template is the finished size of the appliqué.)

23. Remove the paper from the glue side of each fusible web appliqué template.

24. Place Clouds 1 & 2, as well as Road Lines 1 & 2 as shown in the diagram. Road lines 1 & 2 should be placed to give the appearance that they disappear into the distance. Use the appliqué guide given below to assist in placing each appliqué template.

25. Once you are satisfied with the placement of each template, pin thoroughly into place to move the quilt to the ironing board. Use an iron to fuse templates into place.

26. Use a decorative stitch and thread color of your choice to secure appliqué into place. Press for a nice finish.

Mohawk Trail

15

windhamfabrics.com

27. Place Telephone Poles 1-3 and Wires A-N as shown in the Quilt Assembly Diagram on . (Please note: If completing methods other than applique to finish Wires A-N, disregard these instructions. Simply trace the wires onto the quilt top using the templates as your guide. Complete wires using your preferred method). Please note: The ends of Wires A-N should run underneath Telephone Poles 1-3 to cover the raw edges. Telephone Poles 1-3 are placed over quilt top seams as shown. Telephone Pole 1 is placed over the left seam in Landscape Section 1. Telephone Pole 2 is placed over the seam connecting Landscape Sections 1 & 2. Telephone Pole 3 is placed over the right seam in Landscape Section 1.

28. Once you are satisfied with the placement of each template, pin thoroughly into place to move the quilt to the ironing board. Use an iron to fuse templates into place.

29. Use a decorative stitch and thread color of your choice to secure appliqué into place. Press for a nice finish to complete the quilt top.

Finishing

30. With the backing fabric laying taut, place batting and then quilt top to form quilt sandwich.

31. Baste sandwich. Quilt as desired.

32. Bind with Fabric G to finish quilt.

Mohawk Trail

16

windhamfabrics.com

QUILT ASSEMBLY DIAGRAM

Mohawk Trail Piecing Templates

by Natalie Crabtree

A

B

C

D

E F G

HI

JKL

M

N

O

PQ

RS

TUV

W

X

YZ

AABB

CC

DD

EE

FF

GG

HH

IIJJ

KK

LLMM

NN

OO

PP

QQ

RR

1 inch

17

1 inch square

PLEASE PRINT TEMPLATES AT 100% SCALE.

Mohawk Trail Pattern by Natalie CrabtreePiecing Template Page 1/61

please note this diagram is not to scale and is for layout purposes only

Sky Template A

Side 1

Sid

e 2

18

1 inch square



Sky T

emplate A

Side 2

Sky Template HH

Side 1 19

1 inch square

PLEASE PRIN

T TEMPLATES

AT 100% SC

ALE.

Mohaw

k Trail Pattern by Natalie C

rabtreePiecing Tem

plate Page 3/61

Sky Template B

Side 1 20

1 inch square



Sky T

emplate O

O

Side 1

Landscape Tem

plate I

Side 1 21

1 in

ch

squa

re

PLEA

SE P

RIN

T TE

MPL

ATES

AT

100

% S

CA

LE.

Moh

awk

Trai

l Pat

tern

by

Nat

alie

Cra

btre

ePi

ecin

g Te

mpl

ate

Page

5/6

1

Sky Template C

Side 1 22

1 inch square



Landscape Tem

plate H

Side 1 Side 1

Sky T

emplate G

G

23

1 inch square

PLEASE PRIN

T TEMPLATES

AT 100% SC

ALE.

Mohaw


rabtreePiecing Tem

plate Page 7/61

Landscape Tem

plate E

Side 1

Landscape Tem

plate F

Sid

e 1

24

1 inch square



Landscape Tem

plate NNLandscape T

emplate F

Side 1

Side 2 25

1 inch square



Landscape Tem

plate G

Side 1

Landscape Template D

Sid

e 1

Side 2 26

1 inch square



Landscape Template QQ


Side 1

Side 4 27

1 inch square



Road Template V

Side 1

Sid

e 2

28

1 inch square



Landscape Template LL

Landscape Tem

plate BB

Road Template V

Side 2

Side 3 29

1 inch square



Landscape Template Y

Side 1 30

1 inch square



Roa

d T

empl

ate

Q

Side 1 Side 1

Landscape Tem

plate M

31

1 inch square



Road Template U

Side 1 Sid

e 2

32

1 inch square



Landscape Tem

plate EE

Road Template U

Side 2

Side 3 33

1 inch square



Sky Template A

Side 1

Sid

e 3

Side 4 34

1 inch square



Sky T

emplate A

Side 3 Sky Template HH

Side 1

Side 2 35

1 inch square

PLEASE PRIN

T TEMPLATES

AT 100% SC

ALE.

Mohaw


rabtreePiecing Tem

plate Page 19/61

Sky Template B

Side 1

Side 2

Sid

e 3

36

1 inch square



Sky Template OO

Side 1 Side 1

Landscape Tem

plate I

Side 2 Side 2

Sky T

emplate B

Side 3 37

1 inch square

PLEASE PRIN

T TEMPLATES

AT 100% SC

ALE.

Mohaw


rabtreePiecing Tem

plate Page 21/61

Sky Template B

Side 1

Side 2

Sid

e 3

38

1 inch square



Landscape Tem

plate H

Side 1

Side 2

Sky T

emplate G

G

Side 1

39

1 inch square

PLEASE PRIN

T TEMPLATES

AT 100% SC

ALE.

Mohaw


rabtreePiecing Tem

plate Page 23/61

Landscape Tem

plate E

Side 1

Side 2 40

1 inch square



Landscape Tem

plate F

Side 2

Side 3

Landscape Tem

plate JJ

41

1 inch square

PLEASE PRIN

T TEMPLATES

AT 100% SC

ALE.

Mohaw


rabtreePiecing Tem

plate Page 25/61

Landscape Tem

plate G

Side 2

Side 1

Road T

emplate O

Side 1


Side 2

Sid

e 3

42

1 inch square




Side 4

Side 3

Side 5 43

1 inch square



Landscape Template K

K

Landscape Template Z

Road Template V

Side 1

Sid

e 4

44

1 inch square

PLEASE PRIN

T TEMPLATES

AT 100% SC

ALE.

Mohaw


rabtreePiecing Tem

plate Page 28/61

Road Template V

Side 4

Side 3

45

1 inch square



Landscape Template AA

Road Tem

plate Y

Side 1

Sid

e 2

46

1 inch square



Road T

emplate Y

Side 2

Road T

emplate Q

Side 1

Landscape Tem

plate N

Side 1

Landscape Tem

plate M

Side 1

47

1 inch square


Mohaw


rabtreePiecing Tem

plate Page 31/61

Road Template U

Side 1

Sid

e 4

48

1 inch square



Road Template U

Side 3

Side 4

49

1 inch square



Sky Template A

Side 4

Sid

e 5

Side 6 50

1 inch square



Sky T

emplate A

Side 5

Sky Template HH

Side 2

Side 3 51

1 inch square


Mohaw


rabtreePiecing Tem

plate Page 35/61

Sky Template B

Side 2

Sid

e 4

Side 5 52

1 inch square



Landscape Template I

Side 2

Sky T

emplate O

O

Side 2

Sky T

emplate B

Side 4

Landscape Tem

plate MM

Side 1

Landscape Tem

plate J

Side 1 53

1 inch square


Mohaw


rabtreePiecing Tem

plate Page 37/61

Sky Template C

Side 2

Side 3 54

1 inch square



LandscapeTemplate H

Side 2

Landscape Tem

plate RR

Landscape Tem

plate PP

55

1 inch square

PLEASE PRIN

T TEMPLATES

AT 100% SC

ALE.

Mohaw


rabtreePiecing Tem

plate Page 39/61

Landscape Tem

plate DD

Landscape Template E

Side 2

Road Template R

Sid

e 1

Side 2 56

1 inch square



Landscape Template F

Side 3

Road Template R

Side 1

Land

scap

e T

empl

ate

K

Side 1 57

1 inch square



Landscape Template G

Side 1

Road Template O

Side 1

Side 2 58

1 inch square




Side 5

Land

scap

e T

empl

ate

L

Side 1 59

1 inch square



Road Template W

Side 1

Road Template P

Side 1 60

1 inch square



Road Template S

Sid

e 1

61

1 inch square



Road Template S

Side 1

Road T

emplate T

Side 1 62

1 inch square



Landscape Tem

plate CC

Landscape Tem

plate N

Side 1

63

1 inch square

PLEASE PRIN

T TEMPLATES

AT 100% SC

ALE.

Mohaw


rabtreePiecing Tem

plate Page 47/61

Sid

e 1

Road Template X

Road Template X

Side 1

Side 2

Road Template X

Side 2

64

1 inch square



Sky Template A

Side 6

Sid

e 7

65

1 inch square



Sky T

emplate A

Side 7

Sky Template HH

Side 3

66

1 inch square



Sky Template B

Side 5

Sid

e 6

67

1 inch square

PLEASE PRIN

T TEMPLATES

AT 100% SC

ALE.

Mohaw


rabtreePiecing Tem

plate Page 51/61

Sky T

emplate B

Side 6

Landscape Tem

plate MM

Side 1

Landscape Template II

Landscape Tem

plate J

Side 1

68

1 inch square



Sky Template C

Side 3

Sky

4

69

1 inch square



Sky T

emplate C

Side 4

Landscape Tem

plate FF

70

1 inch square



Road Template R

Side 2

71

1 inch square



Land

scap

e T

empl

ate

K

Side 1

72

1 inch square



Road T

emplate O

Side 2

73

1 inch square



Landscape Template L

Side 1

74

1 inch square



Road Template P

Side 1

Side 2

Road Template W

Side 1

Sid

e 2

75

1 inch square



Road Template W

Side 2

Road

Tem

plat

e P

Side 2

76

1 inch square



Road Template T

Side 1

77

1 inch square



B A

D C

Telephone Pole 1

Road

Li

Road

Lin

e 1

ne 2

Telephone Pole 2

Telephone Pole 3

EF

I H GJ

K

L

MN

Cloud 1

Cloud 2

Mohawk Trail Applique Templates by Natalie Crabtree

1 inch

78

1 inch square


Mohawk Trail Pattern by Natalie CrabtreeAppliqué Template Page 1/10

please note this diagram is not to scale and is for layout purposes only

E

M

Tele

phon

e Po

le 1

Side 1

Side 1

Cloud1

79

1 in

ch

squa

re

PLEA

SE P

RIN

T TE

MPL

ATES

AT

100

% S

CA

LE.M

ohaw

k Tr

ail P

atte

rn b

y N

atal

ie C

rabt

ree

App

liqué

Tem

plat

e Pa

ge 2

/10

D

Tele

phon

e Po

le 3

Tele

phon

e Po

le 1

Tele

phon

e Po

le 2

C

A

Tele

phon

e Po

le 3

Tele

phon

e Po

le 2

80

1 in

ch

squa

re

PLEA

SE P

RIN

T TE

MPL

ATES

AT

100

% S

CA

LE.

Moh

awk

Trai

l Pat

tern

by

Nat

alie

Cra

btre

eA

ppliq

ué T

empl

ate

Page

3/1

0

N

J Part 1

I Par

t 1

H Pa

rt 1

F

G P

art 1

81

1 inch square



Cloud2

Side1

K Part 1

L Part 1

82

1 inch square



B

Road Line 1

Side 1 Side 1

Road Line 2

83

1 inch square



Cloud1

Side1

Side 2

Tele

phon

e Po

le 1

Side1

Side2

Telephone Pole 1

Side2

84

1 in

ch

squa

re

PLEA

SE P

RIN

T TE

MPL

ATES

AT

100

% S

CA

LE.

Moh

awk

Trai

l Pat

tern

by

Nat

alie

Cra

btre

eA

ppliq

ué T

empl

ate

Page

7/1

0

I

J Part 2

I Par

t 2

H Pa

rt 2

G P

art 2

85

1 inch square



Cloud2

Side 1

K Part 2

L Part 2

Cloud 1

Side2

Side3 86

1 inch square



Road Line

2

Road Line

1

Side 1

Side 2

Side3

Cloud 1

87

1 inch square



Road Line

2

Road Line

1

Side 1

Side 2

Side3

Cloud 1

mohawk trail - windham fabrics · cut templates wof or lof. use the quilt cover image as your...

Documents