C.V

LETTER HEAD : this C.V for applying Job in Oil & Gas Company as Instrument & Maintenance Engineer or Field Engineer in any department or HSE Engineer and I am Willing to Travel at any Region Overseas .

Name: Mohanad Mahmoud Zaki Mohamed

Address: 4 Elemam Abu Haniefa Street ,7th District _ Nasr city -Cairo, Egypt.

Mobile Phone: 002 01222953115

Iraqi Mobile Phone: 009647827027735

Email: mohanadzaki123@hotmail.com

INTRODUCTION

First Name : Mohannad

Last Name : Mahmoud Zaki

Date of Birth : 25/11/1987

Nationality : Egyptian

Marital State : Single

Gender : Male

ID NO : 28711250106598

Passport No : A09322961

Driving license: YES License)

Language Arabic English German

Spoken Native Fluent Good

Written Native Fluent Good

STRENGTHS: Planning & communication skills

Read about Oil & Gas &Industrial Magazines, Team Leader

Committed and like to learn all about the new technology.

EDUCATION: Bachelor Degree in Electrical Engineering (May 2009).

Engineering Specialization: Electronic & Communication

University: Modern Academy for Engineering &Technology in Cairo.

Grade: very Good, GPA: 3.9, percentage: 78%

Graduation project: (RFID) RADIO FREQUENCY IDENTIFICATION

Reader & tag

Grade: Excellent, GPA: 4.2

Professional Experience:

1- Work in Seenopex Company as Safety Engineer in Egypt ( Cairo -Head office) & Iraq (Basra – Drilling Department ) from 10/2013 Until now with Client Baker Hughes , Lukoil

2-Worked in Weatherford Company from 10/2009 Until 6/2012 (Oman) .

Position 1: Data Acquisition Engineer (Surface Logging System)

Job Description & Achievement: Responsible for implementing Company policies with respect to the commissioning of reliable operating units , software & hardware upgrades performed in the field , onsite training of Field Geologists in the correct & safe use & operating procedures of hardware and software , also I was responsible for refurbishing / restocking and all QA/QC aspects of units being prepared for operations from a local base , also I was in many locations and have more responsibilities with respect to purchasing / planning / control, Analyze customer issues, process, reports, P&I drawings, tests and other data to plan service work for faster solution.Ensure proper interdisciplinary coordination and effective communication on service projects / contracts and related activities.Plan, schedule, conduct and coordinate program of assigned Instrument calibration / troubleshooting work and projects either in Middle East Region.Provide telephone technical support & recommendations to customer for instrument related issues and attend to Factory Acceptance Test for onshore and offshore customers, Write accurate professional reports and update company’s CRM system on the job progress.Ensure all in-field activities are carried out safely complying with company Environmental Health & Safety (EHS) guidelines and procedures.

Position 2: Safety Engineer:

Job Description & Achievement: 1- Maintained all safety procedures and norms efficiently

2-Wide experience in the field of managing safety aspects in Petroleum and Gas oil areas

3-Implemented safety measures and effective strategies to reduce risks and hence improved safety

4-Strong knowledge of safety procedure (OSHA and NEBOSH standards)

5-Handled highly hazardous chemical products carefully and successfully

Organization Relationships: I was report to the Respective Country / Operations Supervisor / Manager and to the Regional Technical Support Supervisor.

3- Work in DEGREMONT Company for Waste water Treatment in Cairo –Egypt from (7/2009 until 9/2009)

Position3: Electrical & Safety Engineer

Job Description & Achievement : worked in the Maintenance Department for the Low Voltage and MCC panels (ABB), High Voltage 10.5KV (Schneider ) , General Services (High masts , Lighting , Fans) , PLC SCADA system (Siemens) , Reading all the Drawing for the above mentioned panels , Follow the teams on the site and apply the SMP.

Professional Training Certificates:-

-30-HOUR OCCUPATIONAL SAFETY AND HEALTHY TRAINING COURSE Certified in : OSHA Construction Industry Safety and Health (29 CFR 1926) from OSHA Academy in (Cairo) .

-30-HOUR OCCUPATIONAL SAFETY AND HEALTHY TRAINING COURSE Certified IN : OSHA General Industry Safety and Health (29 CFR 1910) from OSHA Academy in Cairo.

- Platinum Certificate in Emergency and Disaster Management from OSHA Academy in Cairo.

-Training for entry in to Hydrogen Sulphide (H2S) & HSE & Safety Engineering for Designated Area by PDO ( Petroleum Development Oman Company) in Muscat (Oman)( from 1/3/2011 to 15/3/2011).

-Training in Healthy & Safety Environmental ( HSE) from Nebosh & Osha International USA from (15/4/2011 to 30/8/2011)

-Training in Drilling Fundamentals , Types of Well , Types of Rigs , Steps to Drill Oil & Gas Wells , Well Construction & Costing , Communications & Safety Issues , Casing & Drill String Design , Hole Problems .from ( 7/2010 until 9/2010)

-Training for ANAX System & EDR (Engineering Drilling Recorder) programs used in Rigs Drilling from Petronas Company from (2/1/2011 to 20/1/2011).

-Fiber optics and how to test fiber cables using cable meter and cable analyzier and treatment cutter fiber optics buy using new technology and modern devices ( fusion splicy device) training from( ELENTAAG ELHARBY INSTITUTE) for three months from (1/1/2010 to 31/3/2010 ) .

-Low voltage & high voltage & general service & plc & scada system ( siemens) safety in the company in ( fire alarm ) from ( Degremont company ) (– ELGabal ELAsfar – STAGE 2 Phase 1) from (25/10/2009 to 25/11/2009) .

-(CDMA) code division multiple access & (UMTS) universal mobile telecommunications system from jelecome company (31/1/2009 to 1/3/2009) .

-American centrals field 5ESS training from telecom Egypt from (27/7/2008 to 7/8/2008).

- IT Essentials 2 (network operating systems) from (3/8/2007 to 3/9/2007) .

-electronics fundamental training at ITTG Microsoft Certified Partner from (1/7/2006 to 1/8/2006).

-(ICDL) International computer Driving Licence Endorsed by Ministry of Communications & Information Technology –Egypt ( from 1/11/2008 to 29/1/2009) .

-Communication & bussiness skills from (American University in Cairo) from (20/3/2009 to 24/4/2009).

-Lecture for Dr Prof Ibrahim Efiky in The Art of Decision Making in International Cairo Conference in Cairo at 21/2/2009.

References: Available upon request …

Hope my resume meet your Approval ,