module5steels 141120085043-conversion-gate01 2
TRANSCRIPT
![Page 1: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/1.jpg)
1
MODULE – 5ALLOY & SPECIAL STEELS
Rahul Kumar KIIT UNIVERSITY
![Page 2: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/2.jpg)
2
General Categories of Alloy Steels
Carbon and Alloy Steels
Stainless Steel
Tool and Die Steels
Cast Steels (Crucible Steels)
![Page 3: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/3.jpg)
3
Effects of Alloying Elements in Steels
• Boron: improves hardenability without the loss of (or even with some improvement in) machinability and formability
• Calcium: deoxidizes steels, improves toughness and improve formability and machinability
• Carbon: improves hardenability, strength, hardness and wear resistance, as well as reduces ductility, weldability and toughness
• Cerium: controls shape of inclusions and improves toughness in high-strength low alloy steels, as well as deoxidizes steels
![Page 4: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/4.jpg)
4
• Chromium: improves toughness, hardenability, wear and corrosion resistance and high-temperature strength. It also increases depth of hardness penetration resulting from heat treatment by promoting carburization
• Cobalt: improves strength and hardness at elevated temperatures
• Copper: improves resistance to atmospheric corrosion and to lesser extent increases strength with little loss in ductility, as well as also adversely affects hot-working characteristics and surface quality
• Lead: improves machinability, as well as causes liquid-metal embrittlement
![Page 5: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/5.jpg)
5
• Magnesium: has the same effects as cerium
• Manganese: improves hardenability, strength, abrasion resistance and machinability, as well as deoxidizes molten steel, reduce shot shortness, and decreases weldability
• Molybdenum: improves hardenability, wear resistance, toughness, elevated-temperature strength, creep resistance and hardness, as well as minimizes temper embrittlement
• Nickel: improves strength, toughness and corrosion resistance, as well as improves hardenability
• Niobium (columbium): imparts fineness of grain size and improves strength and impact toughness, as well as lowers transition temperature and decrease hardenability
![Page 6: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/6.jpg)
6
• Phosphorus: improves strength, hardenability, corrosion resistance and machinability, as well as severely reduces ductility and toughness
• Selenium: improves machinability
• Silicon: improves strength, hardness, corrosion resistance, and electrical conductivity; it decreases magnetic-hysteresis loss, machinability and cold formability
• Sulfur: improves machinability when combined with manganese, as well as lowers impact strength and ductility and impairs surface quality and weldability
![Page 7: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/7.jpg)
7
• Tantalum: has effects similar to those of niobium
• Tellurium: improves machinability, formability and toughness
• Titanium: improves hardenability; it deoxidizes steels
• Tungsten: has the same effects as cobalt
• Vanadium: improves strength, toughness, abrasion resistance and hardness at elevated temperatures, as well as inhibits grain growth during heat treatment
• Zirconium: has same effects as cerium
![Page 8: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/8.jpg)
8
1. Carbon and Alloy Steels
• carbon and alloying steels are the most commonly used metals
• structural makeup and controlled processing of these steels make them suitable for many different functions
• basic product shapes include plate, sheet, bar, wire, tube, castings, and forgings
• increasing % of alloying elements in steels, increases properties they impart (different elements are added to give different properties
• elements pass on properties such as hardenability, strength, hardness, toughness, wear resistance, etc
• some properties are beneficial while others are detrimental
![Page 9: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/9.jpg)
9
Carbon Steels
• also known as plain carbon steels
• group by % of carbon content (weight basis)
• higher the carbon content greater the hardness, strength and wear resistance after heat treatment
• soft, tough, easily machined, welded & case hardened
• designation: e.g. 1040 steel - 0.40 wt % C
• types:Low-carbon steel (mild steels)Medium-carbon steel High-carbon steel
![Page 10: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/10.jpg)
10
Low-carbon steel (mild steels)• has less than 0.30 % carbon• used in everyday industrial products like bolts, nuts, sheet, plate and
tubesMedium-carbon steel
• has 0.30% to 0.60 % carbon• used for jobs requiring higher strength such as machinery, automotive
equipment parts, and metalworking equipment
High-carbon steel• has more than 0.60 % carbon• used parts that require the highest strength, hardness and wear
resistance• once manufactured they are heat treated and tempered
![Page 11: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/11.jpg)
11
High carbon steel nails
Low carbon steel wires
Medium carbon steel nuts
![Page 12: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/12.jpg)
12
Alloy Steels• contain significant amounts of alloying elements• expensive
Types of Alloy Steels
• High strength low alloy steels (HSLA)
• Microalloyed steels
• Nanoalloyed steels
• Bearing steels
• Cold forming steels
• Chained steels
![Page 13: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/13.jpg)
13
High-Strength, Low-Alloy Steels (HSLA Steels)
• developed to improve the ratio of strength to weight• commonly used in automobile bodies and in transportation industry
(reduced weight makes for better fuel economy)
Microalloyed Steels• provide superior properties without the use of heat treating• when cooled carefully these steels develop enhanced and consistent
strength
Nanoalloyed Steels• have extremely small grain size (10-100 nm)• Since their synthesis is done at atomic level their properties can be
controlled specifically
![Page 14: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/14.jpg)
14
![Page 15: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/15.jpg)
15
High strength low alloy steel sheets
Microalloyed steel connecting rods
Nanoalloyed steel bicycle hub
![Page 16: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/16.jpg)
16
Bearing steel pipes
Cold forming steel front
Chained steel chain
![Page 17: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/17.jpg)
17
2. Stainless Steels
• primarily know for their corrosion resistance, high strength, and ductility and chromium content
• reason for name stainless is due to the fact that in presence of oxygen, steel develops a thin, hard, adherent film of chromium
• Even if surface is scratched, protective film is rebuilt through passivation
• for passivation to occur, there needs to be minimum chromium content of 10 to 12 % by weight
![Page 18: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/18.jpg)
18
• tend to have lower carbon content since increased carbon content lowers the corrosion resistance of stainless steels
• since carbon reacts with chromium, it decreases the available chromium content which is needed for developing protective film
• using stainless steel as reinforcing bars, has become a new trend in concrete structures such as highways buildings and bridges
• more beneficial than carbon steels because it is resistant to corrosion from road salts and the concrete itself
![Page 19: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/19.jpg)
19
Applications Products of Stainless Steels
![Page 20: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/20.jpg)
20
3. Tool and Die Steels
• generally alloyed steels
• medium to high carbon
• up to 25% total alloying elements
• design for high strength, impact toughness and wear resistance at normal and elevated temperatures
• used at temperatures up to 600°C
• specialty steels – very expensive
• quench and tempered
• very clean steels
• applications like dies, drills, cutting blades, hot working dies, etc
![Page 21: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/21.jpg)
21
Desirable Properties of Tool Steels
• Hardness - Resistance to Deforming & Flattening
• Toughness - Resistance to Breakage & Chipping
• Wear - Resistance to Abrasion & Erosion
• Corrosion - Resistance to Rusting and Pitting
![Page 22: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/22.jpg)
22
Alloying Elements in Tool Steels & their Effects
Carbon (C) +Strength, +Hardenability, -Toughness
Chromium (Cr) +Strength, +Hardenability, +Corrosion Resistance - Toughness
Molybdenum (Mo) +Strength, +Hardenability, +Toughness, +Hot Hardness
Vanadium (V) +Hardenability, +Toughness, +Hot Hardness, +Wear
Tungsten (W) +Strength, +Hardenability, +Hot Hardness, -Toughness
Cobalt (Co) +Hot Hardness, +Wear, -Toughness
Manganese (Mn) +Strength, +Hardenability, +Toughness
Nickel (Ni) +Hardenability, +Toughness, +Corrosion Resistance
+ increases- decreases
![Page 23: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/23.jpg)
23
Classification of Tool Steels
Tool Steel Class of Alloys Examples (industrial names)Cold Work W (water hardening)
O (oil hardening)A (air hardening)D (high C & Cr)
W1, W2, W5O1, O2, O6, O7A2, A4, A6, A7, A8, A9, A10, A11D2, D3, D4, D5, D7
Shock Resisting
S S1, S2, S4, S5, S6, S7
Hot Work H Chromium types: H10-H19 Tungsten types: H20-H39 Molybdenum types: H40-H59
High Speed MT
Molybdenum types: M1, M2, M3-1, M3-2, M4, M6, M7, M10, M33, M34, M36, M41Tungsten types: T1, T4, T5, T6, T8, T15
Mold P P6, P20, P21
![Page 24: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/24.jpg)
24
Classification of Tool Steels
![Page 25: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/25.jpg)
25
Cold Work Tool Steels • used at low temperature-sharpness
• include all W, O, A & D class of alloys
• typical applications include cold working operations such as stamping dies, draw dies, burnishing tools, coining tools and shear blades
![Page 26: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/26.jpg)
26
Shock Resisting Tool Steels• used at low temperature-toughness & impact toughness
• include all S class alloys
• toughest tool steels
• typically applications include screw driver blades, shear blades, chisels, knockout pins, punches, and riveting tools
![Page 27: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/27.jpg)
27
Hot Work Tool Steels• used at high temperature-toughness, high resistance to wear & cracking
• include all H class alloys
• typical applications include dies for forging, die casting, heading, piercing, trimming, extrusion and hot-shear and punching blades
![Page 28: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/28.jpg)
28
High Speed Tool Steels • used at high temperature-sharpness
• Include M1 to M52, T1 to T15 class of alloys
• can be hardened to 62-67 RC and can maintain it in service temperatures
as high as 540°C, making them very useful in high-speed machinery
• typical applications include end mills, drills, lathe tools, planar tools, punches, reamers, routers, taps, saws, broaches, chasers and hobs
![Page 29: Module5steels 141120085043-conversion-gate01 2](https://reader035.vdocuments.us/reader035/viewer/2022070523/58edc5661a28abac388b46fb/html5/thumbnails/29.jpg)
29
4. Cast Steels (Crucible Steels)• term originally applied to crucible steel (sometimes used to describe tool
steels, which is misleading)• fine variety of steel, originally made by smelting blister or cementation
steel & pouring molten steel into moulds• manufacture is essentially a refining process, which is dependent on
pre-existing furnace products• cannot not subjected to further forging or rolling