module3-system unit
TRANSCRIPT
KKEEMMEENNTTEERRIIAANN PPEELLAAJJAARRAANN MMAALLAAYYSSIIAA
SSeellff AAcccceessss LLeeaarrnniinngg MMoodduullee
CCoommppuutteerr HHaarrddwwaarree SSyysstteemm UUnniitt
PUSAT PERKEMBANGAN KURIKULUM KEMENTERIAN PELAJARAN MALAYSIA
IIICCCTTT LLLiiittteeerrraaacccyyy fffooorrr SSSeeecccooonnndddaaarrryyy SSSccchhhoooooolll
PPPrrrooogggrrraaammmmmmeee
ICTL For Secondary School - Computer Hardware Module
1
MODULE 3
SYSTEM UNIT
Curriculum Development Centre Ministry of Education Malaysia
ICTL For Secondary School - Computer Hardware Module
2
1. Name of Module : System Unit 2. Learning Outcomes: The students should be able to:
• identify the components of a system unit
• state the functions of the main components of a system unit
• state the functions of cpu, ram, rom and expansions slots found
on the motherboard
3. Knowledge and Skills:
• main components in the computer system
4. Module Summary: At the end of the module, a student is able to :
• identify main components of system unit and motherboard • state the functions of main components of system unit • state the functions of CPU, RAM, ROM and expansion slot
This module contains 2 activities:
Activity 1 : Identify the components of a system unit Activity 2 : Identify the components of a motherboard
As you are doing this module, use the computer in the lab to identify the components in the system unit.
ICTL For Secondary School - Computer Hardware Module
3
Notes: What is system unit?
Box-like case that contains computer’s electronic components Sometimes called the chassis
Figure 1 Examples of System Unit
ICTL For Secondary School - Computer Hardware Module
4
Activity 1 : Identify the components of a system unit Inside view of system unit
Figure 2 Inside view of System Unit
ICTL For Secondary School - Computer Hardware Module
5
Front layer of a system unit
DVD-ROM drive
CD-ROM/CD-RW drive
Zip drive
Floppy disk drive
Empty drive bay
Power button
Reset button
Figure 3 Front View of a System Unit
ICTL For Secondary School - Computer Hardware Module
6
Input/Output port (I/O port)
keyboard
USB USB
mouse
telephone line in
game port
monitor
svideo out
network
cable TV
speaker
serial port
microphone
telephone line out
FM reception
printer (parallel port)
Power port
Figure 4 Back View of a System Unit
ICTL For Secondary School - Computer Hardware Module
7
Functions of the main components of a system unit
No. Components Functions 1. Input/Output port
(I/O port) A port is the point at which a peripheral attaches to a system unit so that the peripheral can send data to or receive information from the computer. An external device, such as a keyboard, monitor, printer, mouse and microphone is often attached by a cable to a port on the system unit. The back of the system unit contains so many ports. Some newer personal computers also have ports on the front of the system unit. Ports have different types of connectors. A connector joins a cable to a peripheral. One end of a cable attaches to the connector on the system unit and the other end of the cable attaches to a connector on the peripheral.
2. Power button To start on computer
3. Reset button Kick of soft boot, instructing the computer to go through the process of shutting down, which would clear memory and reset devices to their initialized state. It simply removes power immediately.
4. Motherboard Main circuit board of the system unit, which has some electronic components attached to it and others built into it.
5. Power Supply Convert standard electrical power into the form that computer can use. If a power supply is not providing the necessary power, the computer will not function properly.
6. DVD-ROM drive A device that reads DVD-ROM, also can read audio CDs, CD-ROMSs, CD-Rs and CD-RWs.
7. CD-ROM drive A device that reads audio CDs, CD-ROMs, CD-Rs and CD-RWs.
8. DVD/CD-RW drive
It is a combination drive that reads DVD and CD media, it also writes to CD-RW media. This drive also allows watching a DVD or burn a CD.
9. Zip drive A high-capacity disk drive that reads from and writes on a Zip disk.
10. Floppy drive A device that reads from and writes on a floppy disk
11. Hard disk drive Type of storage device that contains one or more inflexible, circular platters that store data, instructions and information. Also called a hard disk.
ICTL For Secondary School - Computer Hardware Module
8
Activity 2 : Identify the components of a motherboard
Expansion slots
for RAM
Figure 5: Layout of a motherboard
ICTL For Secondary School - Computer Hardware Module
9
Expansion Card
Expansion Slots
CPU
ICTL For Secondary School - Computer Hardware Module
10
Functions of the components of the motherboard
No. Components Functions 1.
Central Processing Unit (CPU)
A Central Processing Unit or CPU is a microprocessor (or processor for short). It is an integrated circuit chip that is capable of processing electronic signals. The CPU is the most important element in a computer system. A CPU interprets instructions given by the software and carries out those instructions by processing data and controlling the rest of the computer’s components.
2. Random Access Memory (RAM)
RAM is installed inside computers. RAM is also known as a
working memory. The data in RAM can be read (retrieved) or written (stored). RAM is volatile which means the programs and data in RAM
are lost when the computer is powered off. A computer uses RAM to hold temporary instructions and data
needed to complete tasks. This enables the computer's CPU (Central Processing Unit) to access instructions and data stored in the memory very quickly.
RAM stores data during and after processing.
3. Read Only Memory (ROM)
ROM is another type of memory permanently stored inside the
computer. ROM is non-volatile. It holds the programs and data when the
computer is powered off. Programs in ROM have been pre-recorded. It can only be
stored by the manufacturer; once it is done, it cannot be changed.
Many complex functions, such as start up operating instructions, translators for high-level languages and operating systems are placed in ROM memory.
All the contents in ROM can be accessed and read but cannot be changed.
4.
Expansion Slots
Expansion slots are the sockets where the circuit boards or the adapter cards can be inserted into the motherboard. It is a place to fit an expansion card containing the circuitry that provides some specialised capability, such as video acceleration, sound or disk drive control.
ICTL For Secondary School - Computer Hardware Module
11
Appendix 1
ICTL For Secondary School - Computer Hardware Module
12
Worksheet 1 Label the system unit below with the words given. Expansion Cards
Power Supply Zip Drive Hard Disk Drive Floppy Drive
RAM Mother Board CD/DVD Drive Expansion Slots
CPU Chip
ICTL For Secondary School - Computer Hardware Module
13
Worksheet 2 Look at the diagram carefully and match them to the name of the ports in the table given using numbers.
No Label of the ports
1 Power port
USB port
VGA port (Monitor display)
Serial port (Modem)
PS2 port (Mouse)
Game port (Joystick)
Audio ports (speaker, headphone and microphone)
Parallel port (printer port)
PS2 port (keyboard)
ICTL For Secondary School - Computer Hardware Module
14
Worksheet 3 Names the component parts of the motherboard.
ICTL For Secondary School - Computer Hardware Module
15
Worksheet 4 Mark T for True and F for False
1. The processor (CPU) interprets and carries out the basic instructions that operate a computer.
2. Computers can use only one processor at a time.
3. ROM is the main circuit board of the system unit.
4. Expansion slot is a socket on the motherboard that can hold an adapter card. 5. RAM is non-volatile 6. The most important chip on the main circuit board is the microprocessor chip. 7. I/O port is the point at which a peripheral attaches to a system unit so that the peripheral can send data to or receive information from the computer. 8. Reset button is to start on computer. 9. A device that reads from and writes on a floppy disk is called hard disk drives. 10. Power supply convert standard electrical power into the form that computer can use.
ICTL For Secondary School - Computer Hardware Module
16
Worksheet 5 Fill in the blank with the correct name of components and functions. No. Components Functions 1. Input/Output port
(I/O port)
2.
To start on computer
3. Reset button
4. Main circuit board of the system unit, which has some electronic components attached to it and others built into it.
5.
Convert standard electrical power into the form that computer can use.
6. DVD-ROM drive
7. CD-ROM drive
8.
This drive also allows watching a DVD or burn a CD.
9.
A high-capacity disk drive that reads from and writes on a Zip disk.
10. Floppy drive
11.
Type of storage device that contains one or more inflexible, circular platters that store data, instructions and information.
ICTL For Secondary School - Computer Hardware Module
17
Worksheet 6 Find the differences between primary storage RAM and ROM
RAM ROM
ICTL For Secondary School - Computer Hardware Module
18
Reference Cashman, S. (2006) Discovering Computers 2006. USA : Thomson Course Technology. Ibrahim Ahmad, Mohd Hafiz et al (2007) Information and Communication Technology (ICT) Based on SPM Syllabus. Selangor: Venton Publishing (M) Sdn Bhd. NCC Education (2002) Computer Studies, Computer Ace. Sri Lanka : Computer Pioneers. IBasic Computing (2003) by TMEdu Tech (M) Sdn Bhd http://www.wikipedia.org http://images.search.yahoo.com http://www.google.com.my CD courseware ICT