modern furniture design for the office & home - table of contents knoll office … ·...
TRANSCRIPT
Table of Contents
Introduction Knoll and Sustainable Design 4Introduction to Knoll Office Tables 5
Antenna Workspaces Tables 6AutoStrada AutoStrada Basics 9
AutoStrada Materials and Details 10AutoStrada Finishes 11AutoStrada Paint and Laminate Finishes Matrix 12Tables 13Table desks 15Worksurface support 17
Crinion Open Table Introduction 19Specifications 20Crinion Open Table Finishes 21Worksurfaces with center hinged power access 22Worksurfaces with edge grommet 23Worksurfaces with cord drop 24End counters 25Extended end counters 26File tops 28Complete base assemblies fixed height 24� D dual 29Complete base assemblies fixed height 24� D single sided 30Complete base assemblies fixed height 30� D dual 31Complete base assemblies fixed height 30� D single sided 32Complete base assemblies adjustable height 30� D dual 33Complete base assemblies adjustable height 30� D single sided 34Complete base assemblies fixed height 36� D dual 35Complete base assemblies fixed height 36� D single sided 36Complete base assemblies adjustable height 36� D dual 37Complete base assemblies adjustable height 36� D single sided 38Top channels 39Beams for single sided or dual tables 40Beams for dual tables 41Beams for single sided tables 42End legs, intermediate leg sets for dual tables 43End legs, intermediate leg sets for single sided tables 45End panels for dual tables and single sided tables, painted 46End panels for dual tables and single sided tables, laminate and veneer 47Beam trusses 48Worksurface support 49Modular Raceway 51Hardwire Raceway 57Cable tray and cable clips 58Beam mounted cable trays and cable baskets 59Center screens 60Shelves, adapters and buttresses for slatwall screens 62Side screens 63Return screens 65Dual end screens 67Single sided end screen 69Frameless glass Add up 71Morrison Network privacy screens 72
Knoll Office Tables
PLTAB03111
Copyright � 2011 Knoll, Inc.All rights reserved.All prices effective 3/15/2011.
Reff Profiles General Specifications 73Reff Profiles finish options 74Reff Profiles finish options page2 75Reff Profiles Master Features 76Optional edge details 77Conference 11/4� 78Optional edge 11/4� 80Waterfall Edge 11/4� 82Tables, 11/2� 84Tables, 1� 91Top support components 94
Magnusson Construction and Shipping Information 100Construction and Shipping Information page2 101Magnusson Finish Options 102Meeting tables 103Conference tables 104
Interaction Interaction Base Options 105Interaction Table Planning 107Ordering Interaction Tables 111Interaction Core Finishes 112Interaction Legacy Finishes 113Four-star base, fixed and adjustable height 114C-leg tables, fixed and adjustable height, linking tops 117C-leg tables, Counterforce™ corners and split-tops 118T-leg and column base tables, file top 120
Morrison System Top Tables Four-star base, fixed and adjustable height 122C-leg tables, fixed height 123C-leg tables, manually adjustable 124C-leg tables, crank adjustable 125C-leg tables, Counterforce™ adjustable 126T-leg tables 127C-leg tables, split top 128C-leg tables, top crank adjustable 129C-leg tables, electric adjustable 130
Equity System Top Tables Four-star base, fixed and adjustable height 131C-leg tables, fixed height 133C-leg tables, manually adjustable 134C-leg tables, crank adjustable 135C-leg tables, Counterforce™ adjustable 136T-leg tables 137C-leg tables, split-top 138C-leg tables, top crank adjustable 139C-leg tables, electric adjustable 140
Reff System Top Tables Four-star base, fixed and adjustable height 141C-leg tables, fixed height 142C-leg tables, manually adjustable 143C-leg tables, crank adjustable 144C-leg tables, Counterforce™ adjustable 145T-leg tables 146C-leg tables, split top 147C-leg tables, top crank adjustable 148C-leg tables, electric adjustable 149
Dividends Horizon System TopTables
Four-star base, fixed and adjustable height 150C-leg tables, fixed height 151C-leg tables, manually adjustable 152C-leg tables, crank adjustable 153C-leg tables, Counterforce™ adjustable 154T-leg tables 155C-leg tables, split-top 156C-leg tables, top crank adjustable 157C-leg tables, electric adjustable 158
Knoll Office Tables
2
Cascade Edge Top Tables Four-star base, fixed and adjustable height 159C-leg tables, fixed height 160C-leg tables, manually adjustable 161C-leg tables, crank adjustable 162C-leg tables, Counterforce™ adjustable 163C-leg tables, top crank adjustable 164C-leg tables, electric adjustable 165
Interaction Bases Only Interaction bases 166Accessories Accessories 169Currents Introduction to Currents 170
Currents Color Program 173Currents Legacy Finishes 174Worksurface supports 175Desks 176Above-desk storage and lighting for desks 184Worktables 185
Upstart Introduction to Upstart 188Original Upstart Planning Examples 189Knoll Color Program 191Upstart Legacy Finishes 192Upstart Tables 193Plannable Upstart Tables 198Accessories 207Upstart Privacy Screens 208Plannable Upstart Privacy Screens 209
Equity Equity finishes 211Tables 212
Dividends Horizon Y Leg Tables 214X Base Tables 221Table Supports 226Conference Tables 227
Alpha-Numeric Index 231
Selling Policy 240
KnollKey Lock Program 242
General Ordering Information 243
Knoll Office Tables
3
Knoll and Sustainable Design
Each year Knoll sets key initiatives in our journey to sustainability. We are members of a global consortium on energy, have adopted ascientific, metrics-based approach to sustainable product design, and maintain a leadership position in establishing universal,verifiable, sustainability standards for our industry.
Knoll promotes independent third-party certification because it provides the most impartial and trustworthy foundation for industry-wideenvironmental compliance. Certification by established and respected third parties ensures that all manufacturers are held to the samehigh standards and that customers can trust a company’s declaration about the environmental benefits of its products. Knoll third-partypartners include: the International Standards Organization (ISO); Forest Stewardship Council (FSC�); Rainforest Alliance;GREENGUARD� Environmental Institute; and The Business and Institutional Furniture Manufacturer’s Association (BIFMA) level™certification from Scientific Certification Systems (SCS).
In addition, Knoll is aligned with the U.S. Green Building Council and can help companies, healthcare organizations and educationalinstitutions achieve Leadership in Energy and Environmental Design (LEED�) workplace certification.
Global Climate Change• Knoll is a sponsor of the Clinton Global Initiative, which brings together a community of global leaders to devise and implement
solutions to some of the world’s most pressing challenges, including environmental change.
• Knoll has a comprehensive Energy Management Program to increase energy efficiency in products and processes.
Life Cycle Assessment (LCA) Tool• Life Cycle Assessment is a science-based measurement of a product’s environmental impacts throughout its life cycle, from raw
materials sourcing through manufacture, shipping, use and re-use or end-of-life. LCA enables cradle-to-cradle implementation ofsustainable practices.
• Knoll has partnered with The Green Standard.org to develop an affordable, universal ISO-compliant computer-based LCA tool thatcan be used by the entire contract furniture industry and is partnering on the development of an Environmental Product DeclarationSystem (EPDs) for Knoll products. EPDs are verified documents containing LCA results and additional environmental performanceinformation about a product.
Setting Industry Standards• Knoll partners with MTS (The Institue for Market Transformation to Sustainability) to develop the SMaRT© Consensus Sustainable
Products Standards, a set of consensus-based sustainable product standards based on the LEED� model, for all building products,fabric, apparel, flooring and carpet. MTS, the developer of SMaRT©, is an accredited American National Standards Institute (ANSI)standard developer.
• Knoll also partners with BIFMA (Business and Institutional Furniture Manufacturers Association) to promote level™ sustainabilitystandards for the contract furniture industry.
• Knoll has established FSC� (Forest Stewardship Council) certified wood as the standard for general office open plan office systems,casegoods and tables.
• Knoll has launched Full Circle, a resource recovery program developed with ANEW, to help customers extend the life cycle of surplusfurniture, fixtures and equipment (FF&E) in an economically, socially and environmentally responsible manner.
• Our goal is to encourage all manufacturers in the contract furniture industry and related industries to adopt standards that will lead tosustainable products and practices.
For more information about Knoll and sustainable design, visit knoll.com/environment.
4
Introduction to Knoll Office Tables
The following Price List pages are acompilation of Knoll office tables.The product information contained inthis Price List reflects the sameproduct information contained ineach System’s individual Price List.For example, the Equity tablescontained in this Price List can alsobe found in the Equity Price List. Forelectronic specification, discounting,lead times, and additional productinformation, please refer to eachproduct’s individual Price List.
For KnollStudio tables, please referto the KnollStudio Price List.
Knoll Office Tables
5
Preconfigured Tables Antenna Tables are available as complete kits including top, rails and legs. Preconfigured tables include round, square, rectangular and track shapes, in standard Antenna laminate or veneer top details, with painted or chrome finish legs. End legs for round, square and rectangle shapes are table desk end legs that capture the ends of the rails and enable knee space on all sides of desk height tables. Track shape tables are supported by standard Antenna end legs over which the rails extend to the ends of the top for maximum support.
Round tables in 42" diameter have a 27" square base, and tables in 48" diameter include a 30" square base. Round tables in 42" diameter are available in three heights: 18 ½", 24 ½", 28 ½". The lowest height is coffee table height, suitable for reception or casual areas, the medium height is designed for use of portable electronics in casual work areas, and the highest is standard desk height. Round tables in 48" diameter are only available at desk height.
Square tables have table desk end legs at the corners. Square 30" tables are also available in three heights: 18 ½", 24 ½", 28 ½". Square 36", 42" and 48" tables are only desk height.
Rectangular tables have table desk end legs flush with the short ends. Rectangular tables are available in classic 2 x 1 proportions, 48x24, 54x27, 60x30, 72x36, 84x42, all at standard desk height 28 ½".
Rectangular shape tables other than these sizes can be assembled from components (tops, rails and legs specified separately).
Track shape tables have standard Antenna end legs inset 4 ½" from each long side edge adjacent to the semi-circular ends of the top. Track shape tables are 72x36, 84x42 or 96x48, all at standard desk height 28 ½".
All table legs include standard Antenna levelers with 1 ½" continuous adjustment range.
ConstructionAntenna tops are nominal 1 3/16" thick with a laminate or veneer surface finish. Laminate tops have a laminate top surface with an FSC-certified particle board core and a neutral tone backer sheet for balanced construction. Edges can match the top or contrast in color, in 2.8mm ABS with 2.4mm radius
top and bottom edges. Front and back edges overlap ends with a 2.4 mm radius on outside corners.
Techwood and natural veneer tops have a veneer top surface, an FSC-certified particle board core and a neutral tone backer sheet for balanced construction. Veneer tops have matching finish 2.4mm solid veneer edges on all sides. Top and bottom edges have a 2.4mm radius. Veneer grain direction is parallel to front edge on desk tops, and parallel to end on extension tops.
Rails are 1 ¼" square steel tube. End caps are die cast aluminum. Return adapters are die cast aluminum.
End legs are steel weldments with 1" square legs and a 2 ½" horizontal rail. Legs include 2 ½" levelers with 3/8" stems and continuous 1 ½" adjustment range. Cradles and clamps are cast aluminum with countersunk fasteners into legs, mating parts and top.
Specification Options Table tops may be specified in any Antenna solid, pattern or woodgrain laminate, with matching or contrasting ABS edge, or any Antenna Techwood or natural veneer with matching edge. Rails may be specified in any Antenna core or accent painted finish. Legs may be specified in any Antenna core or accent painted finish, with matching cradle finish, or in chrome with any Antenna paint finish for the cradles.
Round Table Plan View Square Table Plan View Rectangular Table Plan View Track Shaped Table Plan View
Round Table Square Table Rectangular Table Track Shaped Table
TablesPlanning Guidelines and Specifications
Knoll Office Tables
6
TablesTrack, Round, Square and Rectangle Shaped Antenna Tops
description w d h pattern no. (L) (V1) (V2) (V3)Chrome Base
Upcharge
Tables with Track Shaped Antenna Tops 72� 36� 281/2� YKTT7236D( ) $1,300. $2,217. $2,442. $2,960. n/a84� 42� 281/2� YKTT8442D( ) 1,400. 2,541. 2,811. 3,432. n/a96� 48� 281/2� YKTT9648D( ) 1,550. 2,888. 3,203. 3,928. n/a
Tables with Round Shaped Antenna Tops 42� 42� 181/2� YKTR42L( ) 1,050. 2,020. 2,223. 2,688. 408.42� 42� 241/2� YKTR42M( ) 1,050. 2,020. 2,223. 2,688. 408.42� 42� 281/2� YKTR42D( ) 1,050. 2,020. 2,223. 2,688. 408.48� 48� 281/2� YKTR48D( ) 1,150. 2,130. 2,348. 2,848. 416.
Tables with Square Shaped Antenna Tops 30� 30� 181/2� YKTS3030L( ) 915. 1,137. 1,205. 1,390. 416.30� 30� 241/2� YKTS3030M( ) 915. 1,137. 1,205. 1,390. 416.30� 30� 281/2� YKTS3030D( ) 915. 1,137. 1,205. 1,390. 416.36� 36� 281/2� YKTS3636D( ) 986. 1,223. 1,300. 1,507. 494.42� 42� 281/2� YKTS4242D( ) 1,082. 1,413. 1,521. 1,788. 540.48� 48� 281/2� YKTS4848D( ) 1,176. 1,607. 1,732. 2,064. 596.
Tables with Rectangle Shaped Antenna Tops 48� 24� 281/2� YKTS4824D( ) 957. 1,186. 1,258. 1,452. 322.54� 27� 281/2� YKTS5427D( ) 1,054. 1,293. 1,374. 1,592. 408.60� 30� 281/2� YKTS6030D( ) 1,168. 1,368. 1,449. 1,706. 416.72� 36� 281/2� YKTS7236D( ) 1,263. 1,505. 1,622. 1,902. 494.84� 42� 281/2� YKTS8442D( ) 1,507. 1,685. 1,801. 2,113. 540.
Ordering Information
Tables
1. Pattern Number2. Top Finish3. Edge Finish
(for laminate tops only)4. Rail Paint Finish5. Cradle Paint Finish6. Leg Paint Finish
Order Code
Tables
Example: YKTS3030DL, 118T,118T, 118T, 118T, 118T
YK Table KitTS Antenna Square Top30 Depth30 WidthD Desk HeightL Laminate118T Bright White Top118T Bright White Edge118T Bright White Paint118T Bright White Paint118T Bright White Paint
Included With
Tables
Antenna Top(2) Rails(2) End Legs(4) Cradles(4) Leveling GlidesAttachment Hardware
Options
Table
Antenna Top Finish Options:
(L) = Laminate(V) = Veneer
Leg Finish Options:
End Legs are available in Knoll corepaints, Dark Red (130) and Slateblue (131) paint finishes, as well aspolished chrome (PD) finish.
Add the chrome base upcharge tothe table list price when the tablebase is specified with a chromefinish.
Knoll Office Tables
7
Ant
enna
Wor
kspa
ces
TablesSquare and Rectangle Shaped Overlay Tops
description width depth height pattern number
Color CoreLaminate
(C)V1(V)
V2(V)
V3(V)
Chrome BaseUpcharge
Tables with Square Shaped Overlay Tops 30� 30� 181/2� YKPTS3030L( ) $2,149. $1,663. $1,810. $2,149. $416.30� 30� 241/2� YKPTS3030M( ) 2,149. 1,663. 1,810. 2,149. 416.30� 30� 281/2� YKPTS3030D( ) 2,149. 1,663. 1,810. 2,149. 416.36� 36� 281/2� YKPTS3636D( ) 2,286. 1,765. 1,923. 2,286. 494.42� 42� 281/2� YKPTS4242D( ) 2,437. 1,882. 2,050. 2,437. 540.48� 48� 281/2� YKPTS4848D( ) 2,565. 1,974. 2,153. 2,565. 596.
Tables with Rectangle Shaped Overlay Tops 48� 24� 281/2� YKPTS4824D( ) 2,208. 1,709. 1,860. 2,209. 322.54� 27� 281/2� YKPTS5427D( ) 2,376. 1,835. 1,999. 2,376. 408.60� 30� 281/2� YKPTS6030D( ) 2,487. 1,914. 2,088. 2,487. 416.72� 36� 281/2� YKPTS7236D( ) 2,673. 2,048. 2,327. 2,673. 540.84� 42� 281/2� YKPTS8442D( ) 2,949. 2,275. 2,479. 2,949. 540.
Ordering Information
Tables
1. Pattern Number2. Top Finish3. Edge Finish
(for laminate tops only)4. Rail Paint Finish5. Cradle Paint Finish6. Leg Paint Finish
Order Code
Tables
Example: YKPTS3030DL, 311,V440, 118T, 118T, 118T
YK Table KitPTS Overlay Square Top30 Depth30 WidthD Desk HeightL Laminate311 Solid Gallery White TopV440 Natural Hemlock Edge118T Bright White Paint118T Bright White Paint118T Bright White Paint
Included With
Tables
Antenna Top(2) Rails(2) End Legs(4) Cradles(4) Leveling GlidesAttachment Hardware
Options
Table
Antenna Top Finish Options:
(C) = Color Core Laminate(V) = Veneer
Leg Finish Options:
Table Desk End Legs are availablein Knoll core paints, Dark Red(130) and Slate blue (131) paintfinishes, as well as polished chrome(PD) finish.
Add the chrome base upcharge tothe table list price when the tablebase is specified with a chromefinish.
Knoll Office Tables
8
AutoStrada Basics
IntroductionWith a commitment to innovationand modern aesthetics, Knoll sets thestandard for the environment inwhich people work. AutoStrada isone of the most comprehensive officeconcepts to be developed by Knoll.Evolving workplace needs are metwith innovative design, from privateoffices to collaborative spaces forteam interaction.
AutoStrada addresses any officecombination with a consistentaesthetic of high quality materialsand carefully detailed design.Whether an office requires ahigh-performance open plan system,refined architectural case goods,progressive private office furniture,or a collaborative ‘‘big table’’concept, AutoStrada provides asolution.
AutoStrada is a planning approachthat combines furniture and interiorarchitecture for both open plan andprivate offices spaces.
AutoStrada is a premium, one-sourcedesign.
AutoStrada is the definition of themost advanced technologymanagement capabilities.
AutoStrada is modern. It is absolutedesign with a strong, basic designpremise.
The Planning ModelsFour AutoStrada planning modelsoffer one set of continuous,intelligent, solutions-orientedcapabilities.
Four ways AutoStrada redefinesspace:• Spine-based planning• Storage-anchored planning• Collaborative table-based
planning• Architectural office planning
Any one environment could includesolutions provided by any mix or allof the four planning models. Diverseplanning models meet cross-culturalworkplace environments everywhere.
AS1 AutoStrada spine basedplanningAutoStrada spine based planningprovides wall-like architectural orderto office interiors and offers highperformance technological support.The spine supports continuousoff-module attachment ofworksurfaces, storage components,KnollExtra accessories, andperpendicular linkable screens orpanels to define workstations. Thespine also manages and distributespower and communicationsthroughout clusters of workstations,enabling convenient outlets at deskheight and unobstructed access tocabling.
Spines can be built to any one footincrement of length and can befreestanding with outriggers tosupport cantilevered worksurfacesand overhead storage. Spines mayalso be integrated with attachedpanels or screens for support andenclosure. T-ends enable the spine toextend to absorb the dimensionalgain of attached panels.
Spine covers include veneer,laminate, dry-erase marker, tackablefabric, integral shelves, slat wall andintegral cable tray surfaces. Spinesare available in threehorizons--39�H, 48�H and 64�H--and may be fitted with framelessglass add ups for additional privacyabove any of four crown profiles.
Linkable screens are available intackable upholstered or glazedpanels and windows, with a completerange of connectors that also supportworksurfaces and storage.
AS2 AutoStrada storage anchoredplanningAutoStrada storage anchoredplanning redefines the open officearchitecture with aesthetic andfunctional alternatives toconventional panel-based systems.Storage anchored planning beginswith the anchor cabinet to whicheither AutoStrada panels or wood orlaminate surrounds are attached tocreate individual or shared workareas. Storage anchored planningcombines the performance of systemsfurniture with elegant details morelike custom millwork.
AutoStrada panels feature a laminateor veneer tiled grid to the floor, withaluminum reveals between tiles onthe exterior, and fabric or fabric andslat wall surfaces on the inside of theworkstation. Interior base racewaydistributes power andcommunications throughout a clusterwith outlets only on the inside of thepanels. AutoStrada panel heightsenable seated access (42�H), seatedprivacy (49�H) or standing privacy(64�H). Frameless glass add ups canbe added to panels for additionalprivacy. Connectors supportworksurfaces, overhead storage orshelves and KnollExtra papermanagement and technology supporttools.
AutoStrada surrounds, in veneer orlaminate surface, are ideal for raisedfloor environments and a visualalternative to panels. Mediansurrounds or median storage form thebackbone to which bridges andanchor cabinets are attached.Medians include a back panel, one ortwo end gables, a counter surface anda worksurface or shelves. Bridgesinclude a back panel andworksurface. AutoStrada surroundstypically describe workstationboundaries at a 49� horizon.
AS3 AutoStrada wall basedplanningAutoStrada wall based planningintegrates freestanding and wallsupported storage, desks and tablesto build distinctive workspaces inprivate offices and walledcollaborative areas.
AutoStrada Applied Walls addsystems performance to built walls,enabling various surface materialsand off module support for shelves,overheads and worksurfaces.Applied wall is either 69�H or 84�H,in any 6� increment of width.Horizontal channels containinterchangeable inserts like veneer,marker surface, fabric, glass, slatwall or recessed covers, and acceptbrackets for a variety of accessoriesat any point. Wall frames transfermost of the supported load directly tothe floor.
AutoStrada overheads andtackboards can also be directlyattached to most built walls.Freestanding AutoStrada cabinets forprivate offices are available in 70�and 84� horizons.
AS4 AutoStrada collaborativeplanningAutoStrada collaborative planning isbased on the Crinion Open Table,which creates open sharedworkspaces for groups from two toten or more at a continuousworksurface ‘‘bench’’. Designed tosupport teams of people CrinionOpen Table is ideal for tradingrooms, libraries and conferencerooms.
Crinion Open Table offers a uniquealternative to traditionalworkstations, with continuouscantilevered worksurfaces,unobstructed kneespace, convenient,capable power and communicationsdistribution, and optional desktopprivacy screens. An extremely strongstructure supports worksurfaces upto 36�d each side and virtuallyunlimited in length.
Crinion Open Table may becomplemented with AutoStradametal or wood storage, or Calibrefiles and cabinets as parallel filebanks or as returns.
Knoll Office Tables
9
Aut
oStr
ada
AutoStrada Materials and Details
MaterialsAutoStrada offers a range ofexceptional materials and finishes,including premium grade hardwoodveneers, Techwood, laminate, clearanodized aluminum, andarchitectural glass.
Veneers are all hand selected to bestshowcase the beauty of natural grain.Every effort is made to ensure thatKnoll veneers are the best that canbe sourced in quality of color,consistency and size. Naturalvariations of wood are not consideredto be defects. The natural process ofcolor change in real wood products ispart of the beauty and uniquecharacter of the material. Knollexpects wood to patina over time.
Techwood is a genuine wood veneerwhich has been enhanced bytechnology to provide color and grainconsistency.
High recycled content aluminum isused in the manufacture of aluminumcomponents.
High-pressure laminate surfacematerials have been selected fortheir durability and lowmaintenance.
FSC (Forest Stewardship Council)certified materials are available byrequest.
Construction detailsAll AutoStrada worksurfaces are 11/4�thick and are a 3 ply solidconstruction. Worksurfaces areavailable in rectilinear and wedgeshapes. The distinctive 3/8� taperededge can be specified on just theuser side or also on the approachside. Worksurfaces can be specified‘‘full depth’’ with or withoutgrommets, or with a 3/8� cord dropalong the back with a centered edgegrommet.
Worksurfaces appear to ‘‘float’’ 1�above lower storage components.Pedestals and legs can support aworksurface height of 281/4�H(typically in open plan) or 295/8� (inprivate offices). The higherworksurface height requires woodpedestals equipped with cabinet feet.
Pedestals and overhead storage areavailable in either metal or woodcase. Wood pedestals have fullextension file drawer slides withbottom-loadable steel floor and 3/4extension slides all woodconstruction box drawers.
Wood or laminate case cabinets withhinged doors and adjustable shelvesrequire doors to be removed to adjustshelving; alternatively a specialrequest 170° hinge package isavailable to retrofit cabinets in thefield.
Metal pedestals and Reuter overheadstorage cabinets with flat front aredurable steel construction withpainted, laminate or veneer drawerfronts.
Metal pedestals feature full widthprotruding aluminum pull. Metalpedestals have all full extensionpersonal, data and file drawer slides.
Wood cases incorporate 3 plyconstruction and components arefinished on all sides. Core material is45lb density particleboard. Wooddrawers feature dovetail joinerydetails. File drawers have steel floorand are bottom loadable. Wooddrawers feature full width anodizedaluminum recessed or protrudingpull. File drawers include file bars tosupport letter or legal suspendedfiling in either direction.
Freestanding private office cabinetsare supported by cylindricalextruded aluminum feet which matchan optional worksurface standoffdetail.
Spine, linkable screens, panels, legsand metal storage offer 1� or greaterlevelling capacity. Wood storage has1/2� levelling.
Cable managementAutoStrada incorporates discreet andconcealed wire management as wellas four or six circuit powerdistribution in all four planningmodels, supporting low to very hightechnology requirements. Storageanchored surrounds, designed forraised floor environments, are theonly planning type that does not havepower distribution capability.
Leg designAutoStrada support legs are a refinedshape in clear anodized aluminumfinish. Legs feature either lockablecasters or a unique glide sleeve thatallows leveling without exposed glidethreads. A pair of straight legs or one9� wide leg can support one end of aworksurface when the other end isspine-supported, panel-supported orjoined to a perpendicularworksurface with AT2TB brackets. Ifdistance between support spans over48�, additional support is required.
Two pairs of straight legs may also bespecified to create a freestandingtable in combination with anAutoStrada worksurface not toexceed 72� x 30� with acorresponding stiffener.
LocksAll pedestals and cabinets withdrawers are supplied with a ganglockmechanism in place. In addition,cabinets 30� wide and over withdrawers have an interlock anti-tipfeature to prevent the opening of asecond drawer when one is alreadyopen. Drawer fronts and door frontswhere applicable are routed toreceive the lock itself. Keyinginstructions for key alike mustaccompany all orders and are fieldinstalled. Products are shipped fromthe factory with random locks or lockplugs for key-alike orders.
Representative DimensionsAll dimensions in this price list arenominal and for representativepurposes only. For specific builddimensions please consultspecification planning tools orcontact your Customer Servicerepresentative.
Line drawings in this price list arestrictly for quick productidentification.
Knoll Office Tables
10
AutoStrada Finishes
Finishes
L - LaminateMatching edge band unless notedotherwise117 Soft Grey118 Bright White114 Folkstone Grey111 Jet Black119 Pumice121 Micro Grey with 114
Folkstone grey edge band122 Brushed Sand with 119
Pumice edge band123 Brushed Grey with 128 Fog
edge band128 Fog129 Micro Sand with 119 Pumice
edge band124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut
V1 - Techwood VeneerY316 MapleY319 CherryY323 Medium WalnutY326 Dark MahoganyY327 Light OakY329 Medium OakY341 WengeY342 Medium TeakY343 Dark Grey OakY344 EspressoY851 Black OakY811 NaturalY821 Blond MapleY831 Light Cherry
V2 – Natural Veneer/Premium Techwood VeneerV312 Bronze CherryV316 MapleV411 Light WalnutV415 Peacock Green WalnutV417 Old English WalnutV418 Smoked WalnutV433 Light Fawn CherryV436 Medium Brown Cherry(above V2’s are flat cut)
V421 Chalk OakV423 Light OakV425 Amber OakV427 Brown Oak(above V2 Oaks are rift cut)
V439 Straight AnigreV440 Natural Hemlock(above V2’s are quarter cut)
Y841 EbonyY861 GrigioY871 Iced Sycamore(above Premium techwoods arestraight grain)
V3 – Exotic veneerV512 Figured AnigreV514 MakoreV515 Figured SycamoreV513 Graphite Oak
(rift cut)V517 Natural SapeleV518 Natural Chestnut(all V3s are quarter cut)
PaintP1111 Jet Black112 Brown113 Dark Grey114 Folkstone Grey115 Medium Grey116 Sandstone117 Soft Grey
P2611 Beige Mist Metallic612 Medium Metallic Grey
P3118 Bright White613 Silver
AnodizedAA Anodized Aluminum
PlatedPT Brushed Pewter
Glass G1TEMP Clear Tempered
Architectural Glass G2GL6 Block MatrixGL13 Powder
Mixed Finishes: (where applicablefor work surfaces only)To order mixed finishes, enter fourdigit finish code as follows:
Use 2 digit prefix to indicate surfacefinish (laminate)
11 Jet Black14 Folkstone Grey17 Soft Grey18 Bright White19 Pumice21 Micro Grey22 Brushed Sand23 Brushed Grey28 Fog29 Micro Sand
Use 2 digit suffix to indicate edgefinish (wood)
12 for V31216 for V316, Y316Y9 for Y319Y3 for Y32326 for Y32627 for Y32729 for Y32943 for V43345 for V41546 for V43647 for V41748 for V41852 for V51253 for V51354 for V51455 for V51557 for V51761 for V41171 for V42173 for V42375 for V42577 for V427
Example:For a Micro Grey laminate surfacewith Bronzed Cherry edge, enterfinish code 2112
For a Jet Black laminate surfacewith Light Maple edge, enter finishcode 1116
Knoll Office Tables
11
Aut
oStr
ada
AutoStrada Paint and Laminate Finishes Matrix
All standardPaint Finishes
AA or all paintsexcept Silver
LaminateHorizontalSurfaces
Laminate VerticalSurfaces
AnodizedAluminum Only
AS1 Spine Based standard crown covers spine base trim covers worksurfaces structural base coversstructural base covers slat wall covers tables access covers
outlet covers integral shelves fronts for metalpedestals
spine connectors flat crown covers fronts for Reuteroverheads
metal pedestals andfronts
flat crown covers box shelves
Reuter cases and fronts straight legswide legs
pullsAS2 Storage Anchored slat wall, panel panel top trim worksurfaces all laminate pedestals top trim wider than 96�
panel raceway covers panel reveals anchor cabinetsstorage reveals medians
pulls bridgestiles, panels
all laminate overheadsAS3 Applied Wall &private officecomponents
wall covers horizontal channelsup to 96�
worksurfaces wall covers horizontal channelswider than 96�
coat hook slat wall covers tables freestanding storagepicture hook recess covers applied wall shelves wall hung overheads
bookends end trimcable tray
marker traydisplay shelf
shelf platformsAS4 Crinion Open Table end legs hinged access worksurfaces, tapered
edge and post formedbeams
intermediate legs top channelup to 96�
top channellonger than 96�
cantilevers screen frames
Finishcode Finish name
Paintgrade
All standardPaint Finishes
AA or all paintsexcept Silver
LaminateHorizontalSurfaces
Laminate VerticalSurfaces
AnodizedAluminum Only
611 Beige Mist Metallic P2 • •118 Bright White P3 • • • •112 Brown P1 • •123 Brushed Grey �
122 Brushed Sand �
113 Dark Grey P1 • •128 Fog • •114 Folkstone Grey P1 • • • •111 Jet Black P1 • • • •115 Medium Grey P1 • •612 Medium Metallic Grey P2 • •121 Micro Grey �
129 Micro Sand �
119 Pumice • •116 Sandstone P1 • •613 Silver P3 •117 Soft Grey P1 • • • •
812 Easy Grey*813 Trim Grey*AA Anodized Aluminum • •LW Markerboard White **
Notes:� All laminates have matching edge bands except:
123 Brushed Grey has 128 Fog edge122 Brushed Sand has 119 Pumice edge121 Micro Grey has 114 Folkstone grey edge129 Micro Sand has 119 Pumice edge
* Easy Grey and Trim grey integral colors only available forCompact crown coversLinkable screen trimLinkable screen top capsSpine end connector top caps
** Markerboard white is available only on AS1 spine access covers, AS3 Applied Wall covers and AS4 screens.
Knoll Office Tables
12
Tableswith straight legs
description h w d dia. pattern no. L M V1 V2 V3
Square table, tapered 4 sides 281/4� 42� 42� ATA1T44242( )( )( )( )( ) $1,523. $1,689. $1,689. $1,722. $1,995.281/4� 48� 48� ATA1T44848( )( )( )( )( ) 1,649. 1,730. 1,730. 1,778. 2,119.
Rectangular table, tapered 4 sides 281/4� 48� 30� ATA1T44830( )( )( )( )( ) 1,555. 1,675. 1,675. 1,698. 1,934.281/4� 60� 30� ATA1T46030( )( )( )( )( ) 1,639. 1,767. 1,767. 1,803. 2,087.281/4� 72� 30� ATA1T47230( )( )( )( )( ) 1,721. 1,802. 1,802. 1,845. 2,179.281/4� 72� 36� ATA1T47236( )( )( )( )( ) 1,762. 1,832. 1,832. 1,888. 2,278.
Round table, tapered edge 281/4� 36� ATA1R36( )( )( )( )( ) 1,580. 1,812. 1,639. 1,691. 1,919.281/4� 42� ATA1R42( )( )( )( )( ) 1,654. 1,846. 1,677. 1,742. 2,040.281/4� 48� ATA1R48( )( )( )( )( ) 1,788. 1,888. 1,723. 1,802. 2,176.
Order Code
Example: ATA1T44242V27CV316AA
A AutoStradaTA Table1 Generation 1T4 Tapered edge 4 sides42 42� wide42 42� deepV Surface type, veneer27 27� leg heightC CasterV316 Finish top, MapleAA Finish, leg
Specification Information
To order please specify patternnumber including:1. Width2. Depth3. Surface type
L = LaminateM = Mixed, Laminate surface/V1,V2 or V3 edgeV = V1, V2 or V3
4. Leg height (to underside ofsurface)27 = 27�h28 = 283/8�h (add $30 for thisoption)30 = 301/8�h (add $66 for thisoption)
5. Leg typeC = with CasterG = with Glide
6. Finish, SurfaceLaminate, Mixed, V1, V2 or V3finish
7. Finish, EdgeMust be same as surface finishunless M surface type specified,then must be V1, V2 or V3 finish
8. Finish, LegAnodized aluminum finish orpainted finish option excludingsilver.
See AutoStrada for finish optionsapplicable.
Product on this page will acceptwood grain laminate where laminateis currently an option.List price for wood grain laminateoptions will be current publishedlaminate list price plus 10%.
Grommets are not optional fortables.
Stiffener included with rectangulartables 60�w and over.
Application Notes
AutoStrada tables include fourstraight legs with glides or casters.
Tables can be specified to surfaceheight of:283/8� : specify 27� leg.295/8� : specify 28� leg.311/2� : specify 30� leg.
Knoll Office Tables
13
Aut
oStr
ada
Tableswith L-legs
description h w d dia.legheight pattern no. L M V1 V2 V3
Square table, tapered 4 sideswith L-legs
283/8� 42� 42� 27� ATAT4LL424227(L/M/V)( )( )( ) $2,210. $2,455. $2,455. $2,505. $2,881.283/8� 48� 48� 27� ATAT4LL484827(L/M/V)( )( )( ) 2,223. 2,470. 2,470. 2,520. 2,898.293/4� 42� 42� 283/8� ATAT4LL424228(L/M/V)( )( )( ) 2,214. 2,460. 2,460. 2,510. 2,887.293/4� 48� 48� 283/8� ATAT4LL484828(L/M/V)( )( )( ) 2,251. 2,500. 2,500. 2,551. 2,934.
Round table, tapered edgewith L-legs
283/8� 36� 27� ATARLL3627(L/M/V)( )( )( ) 2,150. 2,390. 2,390. 2,438. 2,804.283/8� 42� 27� ATARLL4227(L/M/V)( )( )( ) 2,156. 2,397. 2,397. 2,445. 2,812.283/8� 48� 27� ATARLL4827(L/M/V)( )( )( ) 2,169. 2,409. 2,409. 2,459. 2,828.293/4� 36� 283/8� ATARLL3628(L/M/V)( )( )( ) 2,187. 2,430. 2,430. 2,479. 2,851.293/4� 42� 283/8� ATARLL4228(L/M/V)( )( )( ) 2,193. 2,437. 2,437. 2,486. 2,859.293/4� 48� 283/8� ATARLL4828(L/M/V)( )( )( ) 2,206. 2,449. 2,449. 2,500. 2,875.
Rectangular table desk, tapered 4 sideswith L-legs
283/8� 48� 30� 27� ATDT4LL483027(L/M/V)( )( )( ) 2,018. 2,242. 2,242. 2,288. 2,631.283/8� 60� 30� 27� ATDT4LL603027(L/M/V)( )( )( ) 2,054. 2,282. 2,282. 2,329. 2,678.283/8� 72� 30� 27� ATDT4LL723027(L/M/V)( )( )( ) 2,072. 2,302. 2,302. 2,349. 2,702.283/8� 72� 36� 27� ATDT4LL723627(L/M/V)( )( )( ) 2,090. 2,322. 2,322. 2,371. 2,725.293/4� 48� 30� 283/8� ATDT4LL483028(L/M/V)( )( )( ) 2,099. 2,333. 2,333. 2,381. 2,737.293/4� 60� 30� 283/8� ATDT4LL603028(L/M/V)( )( )( ) 2,153. 2,394. 2,394. 2,442. 2,809.293/4� 72� 30� 283/8� ATDT4LL723028(L/M/V)( )( )( ) 2,199. 2,444. 2,444. 2,494. 2,868.293/4� 72� 36� 283/8� ATDT4LL723628(L/M/V)( )( )( ) 2,236. 2,484. 2,484. 2,535. 2,915.
Order Code
Example: ATAT4LL424227V316AA
A AutoStradaTA TableT4 Top tapered 4 sidesLL L-Leg42 42� wide42 42� deep27 Leg heightV Surface type, veneerV316 Finish top, MapleAA Finish, leg
Specification Information
To order please specify patternnumber including:1. Width2. Depth3. Leg height (to underside of
surface)27 = 27�h28 = 283/8�h
4. Surface typeL = LaminateM = Mixed, Laminate surface/V1,V2 or V3 edgeV = V1, V2 or V3
5. Finish, SurfaceLaminate, Mixed, V1, V2 or V3finish
6. Finish, Edge (if applicable)Must be same as surface finishunless M surface type specified,then must be V1, V2 or V3 finish
7. Finish, LegAnodized aluminum finish orpainted finish option excludingsilver.
See AutoStrada for finish optionsapplicable.
Product on this page will acceptwood grain laminate where laminateis currently an option.List price for wood grain laminateoptions will be current publishedlaminate list price plus 10%.
Grommets are not optional fortables.
Worksurface stiffener included withrectangular table desks 60�w andover.
Application Notes
AutoStrada table desks include fourL-legs with glides.
Tables can be specified to overallsurface height of:283/8� : specify 27� leg.295/8� : specify 28� leg.
Knoll Office Tables
14
Table deskswith L-legs
description h w dlegheight pattern no. L M V1 V2 V3
Rectangular table desk withL-legs and full front modesty
283/8� 48� 30� 27� ATDT1LFM483027(L/M/V)( )( )( )( )( ) $2,484. $2,760. $2,760. $2,817. $3,240.283/8� 60� 30� 27� ATDT1LFM603027(L/M/V)( )( )( )( )( ) 2,521. 2,802. 2,802. 2,858. 3,287.283/8� 72� 30� 27� ATDT1LFM723027(L/M/V)( )( )( )( )( ) 2,551. 2,835. 2,835. 2,892. 3,326.283/8� 72� 36� 27� ATDT1LFM723627(L/M/V)( )( )( )( )( ) 2,568. 2,854. 2,854. 2,913. 3,349.293/4� 48� 30� 283/8� ATDT1LFM483028(L/M/V)( )( )( )( )( ) 2,620. 2,910. 2,910. 2,969. 3,415.293/4� 60� 30� 283/8� ATDT1LFM603028(L/M/V)( )( )( )( )( ) 2,624. 2,915. 2,915. 2,974. 3,421.293/4� 72� 30� 283/8� ATDT1LFM723028(L/M/V)( )( )( )( )( ) 2,633. 2,925. 2,925. 2,984. 3,433.293/4� 72� 36� 283/8� ATDT1LFM723628(L/M/V)( )( )( )( )( ) 2,660. 2,955. 2,955. 3,016. 3,468.
Rectangular table desk withL-legs and partial front modesty
283/8� 48� 30� 27� ATDT1LPM483027(L/M/V)( )( )( )( )( ) 2,383. 2,648. 2,648. 2,702. 3,106.283/8� 60� 30� 27� ATDT1LPM603027(L/M/V)( )( )( )( )( ) 2,388. 2,652. 2,652. 2,707. 3,113.283/8� 72� 30� 27� ATDT1LPM723027(L/M/V)( )( )( )( )( ) 2,397. 2,663. 2,663. 2,717. 3,125.283/8� 72� 36� 27� ATDT1LPM723627(L/M/V)( )( )( )( )( ) 2,424. 2,693. 2,693. 2,748. 3,160.293/4� 48� 30� 283/8� ATDT1LPM483028(L/M/V)( )( )( )( )( ) 2,483. 2,758. 2,758. 2,815. 3,238.293/4� 60� 30� 283/8� ATDT1LPM603028(L/M/V)( )( )( )( )( ) 2,487. 2,763. 2,763. 2,820. 3,244.293/4� 72� 30� 283/8� ATDT1LPM723028(L/M/V)( )( )( )( )( ) 2,497. 2,773. 2,773. 2,831. 3,255.293/4� 72� 36� 283/8� ATDT1LPM723628(L/M/V)( )( )( )( )( ) 2,523. 2,804. 2,804. 2,861. 3,291.
Rectangular table desk with L-legsand full front&side modesties
283/8� 48� 30� 27� ATDT1LFS483027(L/M/V)( )( )( )( )( ) 3,077. 3,419. 3,419. 3,489. 4,011.283/8� 60� 30� 27� ATDT1LFS603027(L/M/V)( )( )( )( )( ) 3,118. 3,464. 3,464. 3,535. 4,066.283/8� 72� 30� 27� ATDT1LFS723027(L/M/V)( )( )( )( )( ) 3,154. 3,505. 3,505. 3,576. 4,113.283/8� 72� 36� 27� ATDT1LFS723627(L/M/V)( )( )( )( )( ) 3,181. 3,535. 3,535. 3,608. 4,148.293/4� 48� 30� 283/8� ATDT1LFS483028(L/M/V)( )( )( )( )( ) 3,168. 3,519. 3,519. 3,591. 4,130.293/4� 60� 30� 283/8� ATDT1LFS603028(L/M/V)( )( )( )( )( ) 3,209. 3,565. 3,565. 3,638. 4,184.293/4� 72� 30� 283/8� ATDT1LFS723028(L/M/V)( )( )( )( )( ) 3,246. 3,607. 3,607. 3,679. 4,232.293/4� 72� 36� 283/8� ATDT1LFS723628(L/M/V)( )( )( )( )( ) 3,272. 3,636. 3,636. 3,710. 4,267.
Order Code
Example: ATDT1LPS483027VGV316AA111
A AutoStradaTD Table deskT1 Top tapered 1 side
(user only)L L-LegFM Full front modesty48 48� wide30 30� deep27 Leg heightV Surface type, veneerG GrommetV316 Finish top, MapleAA Finish, leg111 Grommet finish
Specification Information
To order please specify patternnumber including:1. Full or partial modesty (and end
panels when applicable)2. Width3. Depth4. Leg height (to underside of
surface)27 = 27�h28 = 283/8�h
5. Surface typeL = LaminateM = Mixed, Laminate surface/V1,V2 or V3 edgeV = V1, V2 or V3
6. GrommetG=GrommetN=No Grommet
7. Finish, SurfaceLaminate, Mixed, V1, V2 or V3finish
8. Finish, EdgeMust be same as surface finishunless M surface type specified,then must be V1, V2 or V3 finish
9. Finish, LegAnodized aluminum finish orpainted finish option excludingsilver.
10. Finish, Grommet
See AutoStrada for finish optionsapplicable.
Laminate finish options for modestypanels on this page are as follows:114 = Folkstone grey117 = Soft grey118 = Bright white119 = Pumice
Product on this page will acceptwood grain laminate where laminateis currently an option.List price for wood grain laminateoptions will be current publishedlaminate list price plus 10%.
Worksurface stiffener included withrectangular tables 60�w and over.
Application Notes
AutoStrada tables include fourL-legs with glides and full or partialheight modesty (and optional endpanels).
Tables can be specified to overallsurface height of:283/8� : specify 27� leg.295/8� : specify 28� leg.
Partial height option for 27� leg isnominally 13� and 14�h nominallywith 283/8�h legs; and may bemounted flush to underside ofworksurface or with 1� gap belowworksurface.
Knoll Office Tables
15
Aut
oStr
ada
Table deskswith L-legs
description h w dlegheight pattern no. L M V1 V2 V3
Rectangular table desk with L-legsand partial front and side modesties
283/8� 48� 30� 27� ATDT1LPS483027(L/M/V)( )( )( )( )( ) $2,921. $3,246. $3,246. $3,311. $3,807.283/8� 60� 30� 27� ATDT1LPS603027(L/M/V)( )( )( )( )( ) 2,961. 3,291. 3,291. 3,358. 3,862.283/8� 72� 30� 27� ATDT1LPS723027(L/M/V)( )( )( )( )( ) 2,999. 3,331. 3,331. 3,400. 3,909.283/8� 72� 36� 27� ATDT1LPS723627(L/M/V)( )( )( )( )( ) 3,025. 3,361. 3,361. 3,430. 3,945.293/4� 48� 30� 283/8� ATDT1LPS483028(L/M/V)( )( )( )( )( ) 3,012. 3,346. 3,346. 3,415. 3,926.293/4� 60� 30� 283/8� ATDT1LPS603028(L/M/V)( )( )( )( )( ) 3,053. 3,391. 3,391. 3,461. 3,980.293/4� 72� 30� 283/8� ATDT1LPS723028(L/M/V)( )( )( )( )( ) 3,089. 3,432. 3,432. 3,502. 4,028.293/4� 72� 36� 283/8� ATDT1LPS723628(L/M/V)( )( )( )( )( ) 3,116. 3,462. 3,462. 3,533. 4,064.
Order Code
Example: ATDT1LPS483027VGV316AA111
A AutoStradaTD Table deskT1 Top tapered 1 side
(user only)L L-LegFM Full front modesty48 48� wide30 30� deep27 Leg heightV Surface type, veneerG GrommetV316 Finish top, MapleAA Finish, leg111 Grommet finish
Specification Information
To order please specify patternnumber including:1. Full or partial modesty (and end
panels when applicable)2. Width3. Depth4. Leg height (to underside of
surface)27 = 27�h28 = 283/8�h
5. Surface typeL = LaminateM = Mixed, Laminate surface/V1,V2 or V3 edgeV = V1, V2 or V3
6. GrommetG=GrommetN=No Grommet
7. Finish, SurfaceLaminate, Mixed, V1, V2 or V3finish
8. Finish, EdgeMust be same as surface finishunless M surface type specified,then must be V1, V2 or V3 finish
9. Finish, LegAnodized aluminum finish orpainted finish option excludingsilver.
10. Finish, Grommet
See AutoStrada for finish optionsapplicable.
Laminate finish options for modestypanels on this page are as follows:114 = Folkstone grey117 = Soft grey118 = Bright white119 = Pumice
Product on this page will acceptwood grain laminate where laminateis currently an option.List price for wood grain laminateoptions will be current publishedlaminate list price plus 10%.
Worksurface stiffener included withrectangular tables 60�w and over.
Application Notes
AutoStrada tables include fourL-legs with glides and full or partialheight modesty (and optional endpanels).
Tables can be specified to overallsurface height of:283/8� : specify 27� leg.295/8� : specify 28� leg.
Partial height option for 27� leg isnominally 13� and 14�h nominallywith 283/8�h legs; and may bemounted flush to underside ofworksurface or with 1� gap belowworksurface.
Knoll Office Tables
16
Worksurface supportStraight legs, wide legs and L-legs
description type height pattern number list
Straight leg (pair) Fixed height 27� AB1AS27 ( ) $346.283/8� AB1AS28 ( ) 364.301/8� AB1AS30 ( ) 374.
Straight leg with casters (pair) Fixed height 27� AB1ASC27 ( ) 346.283/8� AB1ASC28 ( ) 364.301/8� AB1ASC30 ( ) 374.
Wide leg Fixed height 27� AB1AW27 ( ) 319.283/8� AB1AW28 ( ) 339.
L-legs (pair) Fixed height 261/2� APTLL26( ) 612.27� APTLL27( ) 629.283/8� APTLL28( ) 640.
Order Code
Example: AB1AS28 AA
AB1A AutoStrada legS Straight28 HeightAA Finish
Specification Information
AutoStrada straight legs, wide legsand L-legs are available in anodizedaluminum or painted finish optionlisted on AutoStrada excludingsilver.
To order specify pattern numberincluding height1. Specify finish
Application Notes
A pair of straight legs or a pair ofL-legs or one wide leg can supportone end of a worksurface when theother end is spine-supported,panel-supported or joined to aperpendicular worksurface withAT2TB brackets. If distancebetween support spans over 48�,additional support is required.
Two pairs of straight legs or L-legsmay also be specified to create afreestanding table in combinationwith an AutoStrada worksurface notto exceed 72� x 30� with acorresponding worksurface stiffener.
AutoStrada straight legs areavailable in three heights with orwithout casters:
27� from floor to underside ofworksurface ( 283/8� desk height )
283/8� from floor to underside ofworksurface (293/4� desk height )
301/8� from floor to underside ofworksurface (311/2� desk height )
AutoStrada wide legs are onlyavailable on glides, 27� or 283/8� tounderside of worksurface.
AutoStrada L-legs are available inthree heights, glide only (no casteroption) 26 1/2�h, 27�h and 283/8�h.
Knoll Office Tables
17
Aut
oStr
ada
Worksurface supportModesty panels
description h w pattern no. L V1 V2 V3
Half height suspended modesty 13� 331/2� AHHSM36 ( ) $328. $388. $421. $548.13� 391/2� AHHSM42 ( ) 338. 396. 433. 564.13� 451/2� AHHSM48 ( ) 347. 405. 443. 577.13� 511/2� AHHSM54 ( ) 358. 412. 456. 591.13� 571/2� AHHSM60 ( ) 366. 420. 467. 607.13� 631/2� AHHSM66 ( ) 376. 427. 479. 622.13� 691/2� AHHSM72 ( ) 386. 436. 490. 636.13� 751/2� AHHSM78 ( ) 396. 443. 501. 652.13� 811/2� AHHSM84 ( ) 406. 451. 513. 668.13� 871/2� AHHSM90 ( ) 415. 460. 526. 683.13� 931/2� AHHSM96 ( ) 424. 468. 537. 697.
Order Code
Example: AHHSM30V316
A AutoStradaHH Half heightS SuspendedM Modesty30 for 30�w work surfaceV316 Finish, Maple
Specification Information
To order please specify patternnumber including:1. Finish
Laminate, V1, V2 or V3 finish
See AutoStrada for finish optionsapplicable.
Product on this page will acceptwood grain laminate where laminateis currently an option.List price for wood grain laminateoptions will be current publishedlaminate list price plus 10%.
Application Notes
To be used for free-standing privateoffice applications.
Half height suspended modestyintended for optional use with worksurfaces when creatingconfigurations including apeninsula top supported at one endby a pair of legs (legs on page 17) or‘‘freestanding’’ table desk by set oflegs and would install just behindthe legs by angle bracket that shipswith modesty. Attachment hardwareincluded.
If installing below worksurface withgrommets, be sure to specifyrecessed grommet location.
Knoll Office Tables
18
Introduction
This Order Guide provides basicplanning, specifications and pricinginformation for Crinion Open Tables.
Refer to KnollExtra price list forcompatible accessories such as flatscreen monitor supports, task lights,paper management accessories,keyboard and storage drawers.
Refer to Calibre, Reff or Currentsprice lists for shared and individualstorage options. Additionalinformation can be found atwww.knoll.com.
Crinion Open Table is thestraightforward alternative for open,collaborative work environments.
Crinion Open Table typicallyconsists of deep worksurfacesend-to-end and back-to-back,cantilever supported by parallelbeams between end legs or endpanels. The beams form a technologycorridor for flat screen monitorsupports, outlets and power/datadistribution. Also available is asingle-sided configuration, with asingle main beam and a smaller backbeam, and a single beamconfiguration for tables withshallower (24� deep) worksurface.
The center of dual tables or back ofsingle-sided tables features a topchannel which supports privacyscreens above the table and modularpower distribution below theworksurface.
Crinion Open Table is appropriate forlibraries and educationenvironments, laboratories, financeand trading desks, teaming areas anddesign offices.
Crinion Open Table is unique inoffering individual height-adjustability and extraordinarilydeep worksurfaces. Overall dualtable depth is 48�, 60� or 72�.
The table structure is strong enoughto span 16 feet between end legs orintermediate supports to build tablesof any length.
The continuous worksurfaces andclear kneespace enable varyingnumbers of workers to sit on eachside. Storage is typically separatedfrom the table in parallel, sharedfile-and-storage islands,perpendicular files as returns ormobile pedestals.
Crinion is distinguished by aminimalist, modern design, anddetails like square or tapered edgeworksurfaces, plastic laminate,Techwood or natural veneers, andaluminum fittings.
Crinion Open Table simplifies theplanning and specifications of anopen office, and it can make adramatic visual and functionalstatement of collaboration.
The quality and classic design ofCrinion work well in virtually anyinterior.
Knoll Office Tables
19
Cri
nion
Ope
nTa
ble
SpecificationsSpecifying Crinion Open Table
Crinion Open Tables are comprisedof worksurfaces, table baseassemblies, power components andscreens.
WorksurfacesIndividual worksurfaces areavailable in four standard widths(48�, 60�, 72�, 96�) and three depths(nominal 24�, 30�, 36�), which maybe combined to form single-sided ordual-sided groups of two to ten ormore positions.
Worksurface edge optionsWorksurfaces are 1 1/4� thick, withthree front edge options:Tapered edge, laminate, veneer ormixed.Square edge, veneerPostformed edge, laminate only
Power and accessory optionsWorksurfaces may be specified withhinged power access door andcontinuous 1/2� cord drop, or edgegrommet and continuous cord drop,or just cord drop.
Hinged power access door is 24�Wand 5�D, centered on worksurfacewidth. Door hinges toward user forcontinuity between access openingand cord drop.
Any worksurface (except endcounters) accepts clamp onKnollExtra accessories such as flatscreen monitor arm or task light.
Other worksurface typesEnd counters have front edge detailon side edges as well and aredesigned to extend dual tables 24� or30� beyond the end leg. End countersalso include 3� wide center grommet.Extended end counters are 36�Dsurfaces with center grommet orhinged power access door. Base ofthe table must be extended 12� underthe back of each extended endcounter (although top channelsshould be specified only as wide asthe worksurfaces on each side of thetable).
All end counters must be supportedby end counter cantilevers andendlegs for end counters.
Worksurface heightsFixed height cantilevers supportworksurfaces at 28 1/2�H, with 27�clear below the top (except directlybelow cantilevers).Adjustable height cantilevers enableworksurfaces to be independently setat 27�, 273/4�, 281/2�, 291/4�, or 30�H.
Open Table base assembliesComplete base assemblies simplifyspecifications for most commonconfigurations of dual or single-sidedopen tables. Base assemblies includetop channels and end caps, beams,end legs and intermediate legs(where required), trusses and topchannel supports, cantileverbrackets (specify fixed or adjustableheight) and midspan supports.Specify worksurfaces, screens, powercomponents, cable trays andaccessories separately.
Complete base assemblies areavailable for the following typicaltables, combinations of 60� or 72�worksurfaces.Single-sided or dual, 24�D, 30�D, or36�D, with continuous beam spanbetween end legs10� W two/four positions 60�W12� W two/four positions 72�W15� W three/six positions 60�WSingle sided or dual 24�D, 30�D, or36�D, with intermediate leg18� W three/six positions 72�W20� W four/eight positions 60�W24� W four/eight positions 72�W25� W five/ten positions 60�W
Open Table base componentsBase assemblies may also bespecified by individual componentsto create configurations other thanthose listed above, or to create tableswith end counters or frameless glassadd ups.In addition to worksurfaces Opentables require top channel, starterbeams for spans up to 15�, extensionbeams for additional spans of 4� to15�, intermediate legs every 16� orless, two end legs or end panels,trusses at every worksurface junctionand at each end leg or end panel.Adjustable tables require twocantilevers per worksurface (or threefor 96�W). Fixed height tables maybe supported by a fixed heightcantilever at each end, sharedcantilevers at each worksurface joint,and a midspan support bracket at thecenter of each worksurface greaterthan 48� wide. For 96�Wworksurfaces the midspan supportshould be a 24�D cantilever.Power components, cable trays andscreens are optional.
Power distributionOptional modular racewaydistributes 2+2 four circuit or 3+3six circuit configuration from a singlepoint of supply. Bundles of cablescan be managed from the floor in acable infeed shroud located at anyintermediate leg. Raceway providespower outlets anddata/communications outlet openingson one or both sides, accessedthrough hinged access doors inworksurfaces or from under table.Specify 30� raceway for two duplexoutlets each side or 42� raceway forfour duplex outlets each side. Specifycompact power module for outletsunder an extended end counter.Duplex outlets, power infeed andjumpers between raceways must bespecified separately.
Privacy screensThere are four screen options forCrinion Open Table.The standard screens are 14�H (42�horizon) or 21�H (49� horizon) inacrylic, slat wall or combinationsurfaces, tackable fabric, marker orveneer. Center screens includemounting hardware to attach to thestandard top channel. Center screensare available full width, 48�, 60� or72�, or shorter by 1� to leave space ateither end of the table for a dual endscreen. Side screens attach to thefront and back of a worksurface atany point other than at a hingedaccess door. Mounting brackets arespecified separately to correspond toeach worksurface edge detail. Dualend screens span across the end of atable (or above an end counter) fromworksurface front edges.
Frameless glass add ups areavailable in 12� height only, 48�, 60�,and 72�W. Add ups can only mountto a top channel for frameless glassadd ups, which may be at the centerof a dual table or back of asingle-sided table.
Original Crinion privacy screens are12�H or 19�H (41� or 48� horizons)and mount to a standard top channelonly.
Morrison Network fabric screens(15�H or 22�H) can also be mountedto the standard top channel withCrinion Open Table mast kit.
Accessories and storageAll Crinion worksurfaces acceptclamp base KnollExtra flat screenmonitor arms and task lights at anypoint except behind the hingedpower access door. Worksurfaces alsoaccept suspended accessories likeadjustable keyboard supports,BackPack center file or keyboarddrawers, or CPU holders. Beamlocation under most tables preventspedestals deeper than 20�underneath. However 36�D tops canbe planned on 30�D table bases tocreate additional kneespace depthand room for 24�D pedestals.
Crinion Open Table file tops areavailable for 27�H Calibre filespositioned perpendicular to the tableto act as returns. Tapered front andback edges assure consistent detailwith tapered worksurface edges. Filetops are also available for pairs offiles and back to back files.
Knoll Office Tables
20
Crinion Open Table Finishes
Finishes
L - LaminateMatching edge band unless notedotherwise117 Soft Grey118 Bright White114 Folkstone Grey111 Jet Black119 Pumice121 Micro Grey with 114
Folkstone grey edge band122 Brushed Sand with 119
Pumice edge band123 Brushed Grey with 128 Fog
edge band128 Fog129 Micro Sand with 119 Pumice
edge band
Additional wood grain laminates forapplication on postformed laminatetops only.(not available on end counters ortapered edge tops):125 Natural Maple126 Natural Cherry124 Medium Cherry127 Walnut
V1 - Techwood VeneerY316 MapleY319 CherryY323 Medium WalnutY326 Dark MahoganyY327 Light OakY329 Medium OakY341 WengeY342 Medium TeakY343 Dark Grey OakY344 EspressoY811 NaturalY821 Blond MapleY831 Light CherryY851 Black Oak
V2 – Natural Veneer/PremiumTechwood VeneerV312 Bronze CherryV316 MapleV411 Light WalnutV415 Peacock Green WalnutV417 Old English WalnutV418 Smoked WalnutV433 Light Fawn CherryV436 Medium Brown Cherry(above V2’s are flat cut)
V421 Chalk OakV423 Light OakV425 Amber OakV427 Brown Oak(above V2 Oaks are rift cut)
V439 Straight AnigreV440 Natural Hemock(above V2’s are quarter cut)
Y841 EbonyY861 GrigioY871 Iced Sycamore(above Premium Techwoods arestraight grain)
V3 – Natural Exotic veneerV512 Figured AnigreV513 Graphite Oak
Rift cutV514 MakoreV515 Figured SycamoreV517 SapeleV518 Natural Chestnut(all remaining V3s are quarter cut)
PaintP1111 Jet Black112 Brown113 Dark Grey114 Folkstone Grey115 Medium Grey116 Sandstone117 Soft Grey
P2611 Beige Mist Metallic612 Medium Metallic Grey
P3118 Bright White613 Silver
AnodizedAA Anodized Aluminum
GlassTEMP Clear TemperedGL13 Powder
AcrylicO OpalT Translucent
ArchitecturalGL13 Powder
Fabric Options
Grade 10Annex (W1360)Bailey II (W359)Broadcloth (W288)Element (W1077)Foundation (W351)Growth Spurt (W692)Solid Crepe (W257)Symbolic Detail (W693)Tailor Made (W133)Versatility (W432)
Grade 15Regency (W210)
Fabric OptionsGrade 20Banyan (W443)Bauhaus Block (W296A)Circle Line (W1146)Clarity (W281)Criss Cross (W305)Devon (W809)Logic (W1318)Melbourne (W228)Nematic (W1292)Outback (W229)Reflect (W884)Resolution (W280)Walkabout (W230)Weave Three (W298)
Grade 30Basket Draft (W249)Flow (W565)Harmony (W232)Interknit (W1090)Match Point (W1145)Micro (W465)Progression (W403)Relay (W1020)
Grade 40Amplify (W1215)Bandwidth (W1219)Clarkson (W1218)Ornament (W1078)
Grade 45Dristi (K872)Macro (W544)Mezzo (W543)
Grade 50Knoll Hopsack (K1206)Presto (K1000)
Grade 55Transition (W816)
Customers Own MaterialPrices for panels that are to bemanufactured with a customersupplied fabric will follow Grade 10panel pricing. COM fabrics aresubject to a testing charge prior toacceptance for use on panels. Panelsbearing COM fabrics are subject toextended leadtimes. It is theresponsibility of the customer’spurchasing agent to ensure COMfabric is supplied for testing andmanufacturing. Delays in receivingCOM fabric for manufacturing willresult in rescheduled delivery dates.
Mixed Finish work surfaces:To order mixed finishes, enter fourdigit finish code as follows:
Use 2 digit prefix to indicate surfacefinish (laminate)
11 Jet Black14 Folkstone Grey17 Soft Grey18 Bright White19 Pumice21 Micro Grey22 Brushed Sand23 Brushed Grey28 Fog29 Micro Sand
Use 2 digit suffix to indicate edgefinish (wood)
16 for V316, Y316Y9 for Y319Y3 for Y32326 for Y32627 for Y32729 for Y32943 for V43345 for V41546 for V43647 for V41748 for V41852 for V51253 for V51354 for V51455 for V51557 for V51761 for V41171 for V42173 for V42375 for V42577 for V427
Example:For a Micro Grey laminate surfacewith Bronzed Cherry edge, enterfinish code 2112
For a Jet Black laminate surfacewith Light Maple edge, enter finishcode 1116
Knoll Office Tables
21
Cri
nion
Ope
nTa
ble
Worksurfaces with center hinged power access
descriptionnominaldepth w d h pattern number L M V1 V2 V3
Worksurface, tapered edge 24� 48� 22� 11/4� XTTK4824A (L/M/1/2/3) ( )( ) $766. $895. $895. $981. $1,186.24� 60� 22� 11/4� XTTK6024A (L/M/1/2/3) ( )( ) 794. 979. 979. 1,079. 1,313.24� 72� 22� 11/4� XTTK7224A (L/M/1/2/3) ( )( ) 848. 1,033. 1,033. 1,145. 1,400.24� 96� 22� 11/4� XTTK9624A (L/M/1/2/3) ( )( ) 945. 1,165. 1,165. 1,299. 1,600.30� 48� 28� 11/4� XTTK4830A (L/M/1/2/3) ( )( ) 778. 969. 969. 1,070. 1,301.30� 60� 28� 11/4� XTTK6030A (L/M/1/2/3) ( )( ) 819. 1,049. 1,049. 1,160. 1,417.30� 72� 28� 11/4� XTTK7230A (L/M/1/2/3) ( )( ) 877. 1,085. 1,085. 1,202. 1,473.30� 96� 28� 11/4� XTTK9630A (L/M/1/2/3) ( )( ) 979. 1,227. 1,227. 1,366. 1,685.36� 48� 34� 11/4� XTTK4836A (L/M/1/2/3) ( )( ) 815. 1,054. 1,054. 1,172. 1,434.36� 60� 34� 11/4� XTTK6036A (L/M/1/2/3) ( )( ) 838. 1,129. 1,129. 1,251. 1,535.36� 72� 34� 11/4� XTTK7236A (L/M/1/2/3) ( )( ) 915. 1,142. 1,142. 1,264. 1,552.36� 96� 34� 11/4� XTTK9636A (L/M/1/2/3) ( )( ) 1,041. 1,290. 1,290. 1,438. 1,779.
Worksurface, veneer square edge 24� 48� 22� 11/4� XTTS4824A (1/2/3) ( )( ) n/a n/a 732. 805. 904.24� 60� 22� 11/4� XTTS6024A (1/2/3) ( )( ) n/a n/a 767. 841. 952.24� 72� 22� 11/4� XTTS7224A (1/2/3) ( )( ) n/a n/a 805. 878. 1,002.24� 96� 22� 11/4� XTTS9624A (1/2/3) ( )( ) n/a n/a 866. 940. 1,087.30� 48� 28� 11/4� XTTS4830A (1/2/3) ( )( ) n/a n/a 841. 916. 1,038.30� 60� 28� 11/4� XTTS6030A (1/2/3) ( )( ) n/a n/a 866. 946. 1,088.30� 72� 28� 11/4� XTTS7230A (1/2/3) ( )( ) n/a n/a 891. 978. 1,185.30� 96� 28� 11/4� XTTS9630A (1/2/3) ( )( ) n/a n/a 940. 1,038. 1,347.36� 48� 34� 11/4� XTTS4836A (1/2/3) ( )( ) n/a n/a 916. 1,007. 1,161.36� 60� 34� 11/4� XTTS6036A (1/2/3) ( )( ) n/a n/a 952. 1,045. 1,190.36� 72� 34� 11/4� XTTS7236A (1/2/3) ( )( ) n/a n/a 989. 1,102. 1,302.36� 96� 34� 11/4� XTTS9636A (1/2/3) ( )( ) n/a n/a 1,063. 1,210. 1,505.
Worksurface, postformed plastic 24� 48� 22� 11/4� XTTP4824A (L) ( )( ) 562. n/a n/a n/a n/a24� 60� 22� 11/4� XTTP6024A (L) ( )( ) 641. n/a n/a n/a n/a24� 72� 22� 11/4� XTTP7224A (L) ( )( ) 702. n/a n/a n/a n/a24� 96� 22� 11/4� XTTP9624A (L) ( )( ) 768. n/a n/a n/a n/a30� 48� 28� 11/4� XTTP4830A (L) ( )( ) 586. n/a n/a n/a n/a30� 60� 28� 11/4� XTTP6030A (L) ( )( ) 671. n/a n/a n/a n/a30� 72� 28� 11/4� XTTP7230A (L) ( )( ) 738. n/a n/a n/a n/a30� 96� 28� 11/4� XTTP9630A (L) ( )( ) 817. n/a n/a n/a n/a36� 48� 34� 11/4� XTTP4836A (L) ( )( ) 618. n/a n/a n/a n/a36� 60� 34� 11/4� XTTP6036A (L) ( )( ) 738. n/a n/a n/a n/a36� 72� 34� 11/4� XTTP7236A (L) ( )( ) 797. n/a n/a n/a n/a36� 96� 34� 11/4� XTTP9636A (L) ( )( ) 884. n/a n/a n/a n/a
Order Code
Example: XTTP6030AL 118 118
XT Crinion Open TableT WorksurfaceP Postformed plastic60 Width30 DepthA With center hinged
power accessL Finish Type118 Work Surface finish118 Access door finish
Specifications
Worksurfaces are 11/4� thick withsquare edge or tapered edge optiontapering to 1/2� thick front edge.1. Specify finish group:
L - LaminateM - Laminate/veneer edge1 - Veneer group 12 - Veneer group 23 - Veneer group 3
2. Specify worksurface finish.3. Speicfy hinged access cover
finish.
AA anodized aluminum and allP1,P2 and P3 paint finishes areavailable except 613 Silver.
Application Notes
Crinion 30�D worksurfacescorrespond in width to table bases,which are specified separately.48�W worksurfaces plan on 12’ wideor 20’ wide bases. 60�Wworksurfaces plan on 5’, 10’, 15’and 20’ wide bases. 72� Wworksurfaces plan on 6’, 12’ and 18’wide bases.
Worksurfaces with hinged poweraccess enable access to suspendedmodular raceway.
Power access door is 24� wide, 5�deep, centered at back edge ofworksurface.
Continous 1/2� wire dropaccommodates clamp-on flat screenmonitor arm or most power cordsplugs.
Actual worksurface depth is 22.35�,28.35� or 34.35�.
Knoll Office Tables
22
Worksurfaces with edge grommet
descriptionnominaldepth w d h pattern number L M V1 V2 V3
Worksurface, tapered edge 24� 48� 22� 11/4� XTTK4824U (L/M/1/2/3) ( )( ) $506. $635. $635. $721. $926.24� 60� 22� 11/4� XTTK6024U (L/M/1/2/3) ( )( ) 534. 719. 719. 819. 1,053.24� 72� 22� 11/4� XTTK7224U (L/M/1/2/3) ( )( ) 588. 773. 773. 885. 1,140.24� 96� 22� 11/4� XTTK9624U (L/M/1/2/3) ( )( ) 685. 905. 905. 1,039. 1,340.30� 48� 28� 11/4� XTTK4830U (L/M/1/2/3) ( )( ) 518. 709. 709. 810. 1,041.30� 60� 28� 11/4� XTTK6030U (L/M/1/2/3) ( )( ) 559. 789. 789. 900. 1,157.30� 72� 28� 11/4� XTTK7230U (L/M/1/2/3) ( )( ) 617. 825. 825. 942. 1,213.30� 96� 28� 11/4� XTTK9630U (L/M/1/2/3) ( )( ) 719. 967. 967. 1,106. 1,425.36� 48� 34� 11/4� XTTK4836U (L/M/1/2/3) ( )( ) 555. 794. 794. 912. 1,174.36� 60� 34� 11/4� XTTK6036U (L/M/1/2/3) ( )( ) 578. 869. 869. 991. 1,275.36� 72� 34� 11/4� XTTK7236U (L/M/1/2/3) ( )( ) 655. 882. 882. 1,004. 1,292.36� 96� 34� 11/4� XTTK9636U (L/M/1/2/3) ( )( ) 781. 1,030. 1,030. 1,178. 1,519.
Worksurface, veneer square edge 24� 48� 22� 11/4� XTTS4824U (1/2/3) ( )( ) n/a n/a 472. 545. 644.24� 60� 22� 11/4� XTTS6024U (1/2/3) ( )( ) n/a n/a 507. 581. 692.24� 72� 22� 11/4� XTTS7224U (1/2/3) ( )( ) n/a n/a 545. 618. 742.24� 96� 22� 11/4� XTTS9624U (1/2/3) ( )( ) n/a n/a 606. 680. 827.30� 48� 28� 11/4� XTTS4830U (1/2/3) ( )( ) n/a n/a 581. 656. 778.30� 60� 28� 11/4� XTTS6030U (1/2/3) ( )( ) n/a n/a 606. 686. 828.30� 72� 28� 11/4� XTTS7230U (1/2/3) ( )( ) n/a n/a 631. 718. 925.30� 96� 28� 11/4� XTTS9630U (1/2/3) ( )( ) n/a n/a 680. 778. 1,087.36� 48� 34� 11/4� XTTS4836U (1/2/3) ( )( ) n/a n/a 656. 747. 901.36� 60� 34� 11/4� XTTS6036U (1/2/3) ( )( ) n/a n/a 692. 785. 930.36� 72� 34� 11/4� XTTS7236U (1/2/3) ( )( ) n/a n/a 729. 842. 1,042.36� 96� 34� 11/4� XTTS9636U (1/2/3) ( )( ) n/a n/a 803. 950. 1,245.
Worksurface, postformed plastic 24� 48� 22� 11/4� XTTP4824B (L) ( )( ) 302. n/a n/a n/a n/a24� 60� 22� 11/4� XTTP6024B (L) ( )( ) 381. n/a n/a n/a n/a24� 72� 22� 11/4� XTTP7224B (L) ( )( ) 442. n/a n/a n/a n/a24� 96� 22� 11/4� XTTP9624B (L) ( )( ) 508. n/a n/a n/a n/a30� 48� 28� 11/4� XTTP4830B (L) ( )( ) 326. n/a n/a n/a n/a30� 60� 28� 11/4� XTTP6030B (L) ( )( ) 411. n/a n/a n/a n/a30� 72� 28� 11/4� XTTP7230B (L) ( )( ) 478. n/a n/a n/a n/a30� 96� 28� 11/4� XTTP9630B (L) ( )( ) 557. n/a n/a n/a n/a36� 48� 34� 11/4� XTTP4836B (L) ( )( ) 358. n/a n/a n/a n/a36� 60� 34� 11/4� XTTP6036B (L) ( )( ) 478. n/a n/a n/a n/a36� 72� 34� 11/4� XTTP7236B (L) ( )( ) 537. n/a n/a n/a n/a36� 96� 34� 11/4� XTTP9636B (L) ( )( ) 624. n/a n/a n/a n/a
Order Code
Example: XTTP6030BL 118 812
XT Crinion Open TableT WorksurfaceP Postformed plastic60 Width30 DepthB With edge grommetL Finish type118 Surface finish812 Grommet finish
Specifications
Worksurfaces are 11/4� thick withsquare edge or tapered edge optiontapering to 1/2� thick front edge.1. Specify finish group:
L - LaminateM- Laminate/veneer edge1 - Veneer group 12 - Veneer group 23 - Veneer group 3
2. Specify worksurface finish.3. Specify grommet color:
812 - Easy grey111 - Black
Application Notes
Crinion 30�D worksurfacescorrrespond in width to table bases,which are specified separately.48�W worksurfaces plan on 12’ wideor 20’ wide bases. 60�Wworksurfaces plan on 5’, 10’, 15’and 20’ wide bases. 72� Wworksurfaces plan on 6’, 12’ and 18’wide bases.
Edge grommet accommodates mostpower cord plugs up to 1� deep.
Actual worksurface depth is 21.85�,27.85� or 33.85�.
Knoll Office Tables
23
Cri
nion
Ope
nTa
ble
Worksurfaces with cord drop
descriptionnominaldepth w d h pattern number L M V1 V2 V3
Worksurface, tapered edge 24� 48� 22� 11/4� XTTK4824C (L/M/1/2/3) ( ) $466. $595. $595. $681. $886.24� 60� 22� 11/4� XTTK6024C (L/M/1/2/3) ( ) 494. 679. 679. 779. 1,013.24� 72� 22� 11/4� XTTK7224C (L/M/1/2/3) ( ) 548. 733. 733. 845. 1,100.24� 96� 22� 11/4� XTTK9624C (L/M/1/2/3) ( ) 645. 865. 865. 999. 1,300.30� 48� 28� 11/4� XTTK4830C (L/M/1/2/3) ( ) 478. 669. 669. 770. 1,001.30� 60� 28� 11/4� XTTK6030C (L/M/1/2/3) ( ) 519. 749. 749. 860. 1,117.30� 72� 28� 11/4� XTTK7230C (L/M/1/2/3) ( ) 577. 785. 785. 902. 1,173.30� 96� 28� 11/4� XTTK9630C (L/M/1/2/3) ( ) 679. 927. 927. 1,066. 1,385.36� 48� 34� 11/4� XTTK4836C (L/M/1/2/3) ( ) 515. 754. 754. 872. 1,134.36� 60� 34� 11/4� XTTK6036C (L/M/1/2/3) ( ) 538. 829. 829. 951. 1,235.36� 72� 34� 11/4� XTTK7236C (L/M/1/2/3) ( ) 615. 842. 842. 964. 1,252.36� 96� 34� 11/4� XTTK9636C (L/M/1/2/3) ( ) 741. 990. 990. 1,138. 1,479.
Worksurface, veneer square edge 24� 48� 22� 11/4� XTTS4824C (1/2/3) ( ) n/a n/a 432. 505. 604.24� 60� 22� 11/4� XTTS6024C (1/2/3) ( ) n/a n/a 467. 541. 652.24� 72� 22� 11/4� XTTS7224C (1/2/3) ( ) n/a n/a 505. 578. 702.24� 96� 22� 11/4� XTTS9624C (1/2/3) ( ) n/a n/a 566. 640. 787.30� 48� 28� 11/4� XTTS4830C (1/2/3) ( ) n/a n/a 541. 616. 738.30� 60� 28� 11/4� XTTS6030C (1/2/3) ( ) n/a n/a 566. 646. 788.30� 72� 28� 11/4� XTTS7230C (1/2/3) ( ) n/a n/a 591. 678. 885.30� 96� 28� 11/4� XTTS9630C (1/2/3) ( ) n/a n/a 640. 738. 1,047.36� 48� 34� 11/4� XTTS4836C (1/2/3) ( ) n/a n/a 616. 707. 861.36� 60� 34� 11/4� XTTS6036C (1/2/3) ( ) n/a n/a 652. 745. 890.36� 72� 34� 11/4� XTTS7236C (1/2/3) ( ) n/a n/a 689. 802. 1,002.36� 96� 34� 11/4� XTTS9636C (1/2/3) ( ) n/a n/a 763. 910. 1,205.
Worksurface, postformed plastic 24� 48� 22� 11/4� XTTP4824C (L) ( ) 262. n/a n/a n/a n/a24� 60� 22� 11/4� XTTP6024C (L) ( ) 341. n/a n/a n/a n/a24� 72� 22� 11/4� XTTP7224C (L) ( ) 402. n/a n/a n/a n/a24� 96� 22� 11/4� XTTP9624C (L) ( ) 468. n/a n/a n/a n/a30� 48� 28� 11/4� XTTP4830C (L) ( ) 286. n/a n/a n/a n/a30� 60� 28� 11/4� XTTP6030C (L) ( ) 371. n/a n/a n/a n/a30� 72� 28� 11/4� XTTP7230C (L) ( ) 438. n/a n/a n/a n/a30� 96� 28� 11/4� XTTP9630C (L) ( ) 517. n/a n/a n/a n/a36� 48� 34� 11/4� XTTP4836C (L) ( ) 318. n/a n/a n/a n/a36� 60� 34� 11/4� XTTP6036C (L) ( ) 438. n/a n/a n/a n/a36� 72� 34� 11/4� XTTP7236C (L) ( ) 497. n/a n/a n/a n/a36� 96� 34� 11/4� XTTP9636C (L) ( ) 584. n/a n/a n/a n/a
Order Code
Example: XTTP6030CL 118
XT Crinion Open TableT WorksurfaceP Postformed plastic60 Width30 DepthC With cord dropL Finish type118 Surface
Specifications
Worksurfaces are 11/4� thick withsquare edge or tapered edge optiontapering to 1/2� thick front edge.
Specify finishes:L - LaminateM- Laminate/veneer edge1 - Veneer group 12 - Veneer group 23 - Veneer group 3
Application Notes
Crinion 30�D worksurfacescorrrespond in width to table bases,which are specified separately.48�W worksurfaces plan on 12’ wideor 20’ wide bases. 60�Wworksurfaces plan on 5’, 10’, 15’and 20’ wide bases. 72� Wworksurfaces plan on 6’, 12’ and 18’wide bases.
Continous1/2� cord dropaccommodates clamp-on flat screenmonitor arm or most power cords.
Actual worksurface depth is 21.85�,27.85� or 33.85�.
Knoll Office Tables
24
End counters
descriptionnominaldepth w l h pattern number L M V1 V2 V3
End counter, tapered edge 24� 48� 24� 11/4� XTTK4824E (L/M/1/2/3) ( ) $653. $841. $841. $927. $1,131.24� 60� 24� 11/4� XTTK6024E (L/M/1/2/3) ( ) 773. 924. 924. 1,026. 1,259.24� 72� 24� 11/4� XTTK7224E (L/M/1/2/3) ( ) 803. 978. 978. 1,091. 1,345.30� 48� 30� 11/4� XTTK4830E (L/M/1/2/3) ( ) 731. 915. 915. 1,017. 1,247.30� 60� 30� 11/4� XTTK6030E (L/M/1/2/3) ( ) 796. 994. 994. 1,106. 1,364.30� 72� 30� 11/4� XTTK7230E (L/M/1/2/3) ( ) 831. 1,031. 1,031. 1,148. 1,419.
End counter, veneer square edge 24� 48� 24� 11/4� XTTS4824E (1/2/3) ( ) n/a n/a 432. 505. 604.24� 60� 24� 11/4� XTTS6024E (1/2/3) ( ) n/a n/a 467. 541. 652.24� 72� 24� 11/4� XTTS7224E (1/2/3) ( ) n/a n/a 505. 578. 702.30� 48� 30� 11/4� XTTS4830E (1/2/3) ( ) n/a n/a 541. 616. 738.30� 60� 30� 11/4� XTTS6030E (1/2/3) ( ) n/a n/a 566. 646. 788.30� 72� 30� 11/4� XTTS7230E (1/2/3) ( ) n/a n/a 591. 678. 885.
End counter for postformed plastic 24� 48� 24� 11/4� XTTP4824E (L) ( ) 487. n/a n/a n/a n/a24� 60� 24� 11/4� XTTP6024E (L) ( ) 578. n/a n/a n/a n/a24� 72� 24� 11/4� XTTP7224E (L) ( ) 651. n/a n/a n/a n/a30� 48� 30� 11/4� XTTP4830E (L) ( ) 547. n/a n/a n/a n/a30� 60� 30� 11/4� XTTP6030E (L) ( ) 651. n/a n/a n/a n/a30� 72� 30� 11/4� XTTP7230E (L) ( ) 779. n/a n/a n/a n/a
* Note
Order Code
Example: XTTP6024EL 118
XT Crinion Open TableT WorksurfaceP Postformed plastic60 Width24 LengthE End counterL Finish Type118 Surface
Specifications
End counters are 11/4� thick withsquare edge or tapered edge optiontapering to 1/2� thick front edge. Endcounters are tapered front and sideedges only.
Specify finishes:L - LaminateM- Laminate/veneer edge1 - Veneer group 12 - Veneer group 23 - Veneer group 3
Application Notes
End counters mount at the ends ofdual tables with two end countercantilever brackets. Specify dualend legs for end counters instead ofstandard dual end legs (tables withend counters must be specified fromcomponents, not assemblies).
Specify 48� W for dual 24� tables,60� W for dual 30� tables and 72� Wfor dual 36� tables.
End counters may not be used withend panel kits.
Specify added length of 24� or 30�beyond end leg for end counters.
* Note - End counters forpostformed plastic are not availablein these finishes:121 Micro grey129 Micro sand122 Brushed sand123 Brushed grey
Knoll Office Tables
25
Cri
nion
Ope
nTa
ble
Extended end counters
descriptionnominaldepth w l h pattern no. L M V1 V2 V3
Extended end counter, tapered edgewith hinged power access
36� 48� 36� 11/4� XTTK4836D (L/M/1/2/3) ( )( ) $1,085. $1,260. $1,260. $1,373. $1,627.36� 60� 36� 11/4� XTTK6036D (L/M/1/2/3) ( )( ) 1,113. 1,313. 1,313. 1,430. 1,701.36� 72� 36� 11/4� XTTK7236D (L/M/1/2/3) ( )( ) 1,195. 1,414. 1,414. 1,537. 1,838.
Extended end counter, tapered edgewith grommet
36� 48� 36� 11/4� XTTK4836E (L/M/1/2/3) ( ) 803. 978. 978. 1,091. 1,345.36� 60� 36� 11/4� XTTK6036E (L/M/1/2/3) ( ) 831. 1,031. 1,031. 1,148. 1,419.36� 72� 36� 11/4� XTTK7236E (L/M/1/2/3) ( ) 913. 1,132. 1,132. 1,255. 1,556.
Extended end counter, veneer square edgewith hinged power access
36� 48� 36� 11/4� XTTS4836D (1/2/3) ( )( ) n/a n/a 763. 832. 950.36� 60� 36� 11/4� XTTS6036D (1/2/3) ( )( ) n/a n/a 873. 960. 1,167.36� 72� 36� 11/4� XTTS7236D (1/2/3) ( )( ) n/a n/a 960. 1,050. 1,298.
Extended end counter, veneer square edgewith grommet
36� 48� 36� 11/4� XTTS4836E (1/2/3) ( ) n/a n/a 481. 550. 668.36� 60� 36� 11/4� XTTS6036E (1/2/3) ( ) n/a n/a 591. 678. 885.36� 72� 36� 11/4� XTTS7236E (1/2/3) ( ) n/a n/a 678. 768. 1,016.
Order Code
Example: XTTP6036DL 118 AA
XT Crinion Open TableT WorksurfaceP Postformed plastic60 Width36 LengthD End counter,center
hinged power accessL Finish Type118 Surface finishAA Access door finish
Specifications
End counters are 11/4� thick withsquare edge or tapered edge optiontapering to 1/2� thick front edge. Endcounters are tapered front and sideedges only.1. Specify finish group:
L - LaminateM- Laminate/veneer edge1 - Veneer group 12 - Veneer group 23 - Veneer group 3
2. Specify worksurface finish.3. Specify hinged access cover
finish.
Hinged access covers are availablein AA anodized aluminum and allstandard paint finishes except 613Silver.
Application Notes
End counters mount at the ends ofdual tables with two end countercantilever brackets. Specify dualend legs for end counters instead ofstandard dual end legs (tables withend counters must be specified fromcomponents, not assemblies).
Specify 48� W for dual 24� tables,60� W for dual 30� tables and 72� Wfor dual 36� tables.
End counters may not be used withend panel kits.
Each extended end counter requiresbase assembly 12� longer thanworksurfaces on each side.
* Note - End counters forpostformed plastic are not availablein these finishes:121 Micro grey129 Micro sand122 Brushed sand123 Brushed grey
Knoll Office Tables
26
Extended end counters
descriptionnominaldepth w l h pattern no. L M V1 V2 V3
Extended end counter, postformed plasticwith hinged power access
36� 48� 36� 11/4� XTTP4836D (L) ( )( ) $933. n/a n/a n/a n/a36� 60� 36� 11/4� XTTP6036D (L) ( )( ) 1,061. n/a n/a n/a n/a36� 72� 36� 11/4� XTTP7236D (L) ( )( ) 1,153. n/a n/a n/a n/a
* Note
Extended end counter, postformed plasticwith grommet
36� 48� 36� 11/4� XTTP4836E (L) ( ) 651. n/a n/a n/a n/a36� 60� 36� 11/4� XTTP6036E (L) ( ) 779. n/a n/a n/a n/a36� 72� 36� 11/4� XTTP7236E (L) ( ) 871. n/a n/a n/a n/a
* Note
Order Code
Example: XTTP6036DL 118 AA
XT Crinion Open TableT WorksurfaceP Postformed plastic60 Width36 LengthD End counter,center
hinged power accessL Finish Type118 Surface finishAA Access door finish
Specifications
End counters are 11/4� thick withsquare edge or tapered edge optiontapering to 1/2� thick front edge. Endcounters are tapered front and sideedges only.1. Specify finish group:
L - LaminateM- Laminate/veneer edge1 - Veneer group 12 - Veneer group 23 - Veneer group 3
2. Specify worksurface finish.3. Specify hinged access cover
finish.
Hinged access covers are availablein AA anodized aluminum and allstandard paint finishes except 613Silver.
Application Notes
End counters mount at the ends ofdual tables with two end countercantilever brackets. Specify dualend legs for end counters instead ofstandard dual end legs (tables withend counters must be specified fromcomponents, not assemblies).
Specify 48� W for dual 24� tables,60� W for dual 30� tables and 72� Wfor dual 36� tables.
End counters may not be used withend panel kits.
Each extended end counter requiresbase assembly 12� longer thanworksurfaces on each side.
* Note - End counters forpostformed plastic are not availablein these finishes:121 Micro grey129 Micro sand122 Brushed sand123 Brushed grey
Knoll Office Tables
27
Cri
nion
Ope
nTa
ble
File tops
description w d h pattern number L M V1 V2 V3
File top, tapered edge 30� 18� 11/4� XTTK3018F (L/M/1/2/3) ( ) $341. $578. $566. $604. $874.30� 36� 11/4� XTTK3036F (L/M/1/2/3) ( ) 467. 730. 730. 818. 1,027.36� 18� 11/4� XTTK3618F (L/M/1/2/3) ( ) 354. 591. 578. 610. 931.36� 36� 11/4� XTTK3636F (L/M/1/2/3) ( ) 487. 800. 800. 895. 1,128.42� 18� 11/4� XTTK4218F (L/M/1/2/3) ( ) 366. 604. 591. 621. 988.42� 36� 11/4� XTTK4236F (L/M/1/2/3) ( ) 509. 830. 830. 938. 1,183.60� 18� 11/4� XTTK6018F (L/M/1/2/3) ( ) 578. 892. 892. 984. 1,230.60� 36� 11/4� XTTK6036F (L/M/1/2/3) ( ) 626. 951. 951. 1,074. 1,358.72� 18� 11/4� XTTK7218F (L/M/1/2/3) ( ) 608. 923. 923. 1,033. 1,294.72� 36� 11/4� XTTK7236F (L/M/1/2/3) ( ) 669. 965. 965. 1,087. 1,375.84� 18� 11/4� XTTK8418F (L/M/1/2/3) ( ) 657. 984. 984. 1,107. 1,354.84� 36� 11/4� XTTK8436F (L/M/1/2/3) ( ) 715. 1,036. 1,036. 1,181. 1,498.
File top, veneer square edge 30� 18� 11/4� XTTS3018F (1/2/3) ( ) n/a n/a 252. 277. 460.36� 18� 11/4� XTTS3618F (1/2/3) ( ) n/a n/a 259. 283. 496.42� 18� 11/4� XTTS4218F (1/2/3) ( ) n/a n/a 265. 290. 536.
File top, postformed plastic 30� 18� 11/4� XTTP3018F (L) ( ) 232. n/a n/a n/a n/a36� 18� 11/4� XTTP3618F (L) ( ) 244. n/a n/a n/a n/a42� 18� 11/4� XTTP4218F (L) ( ) 255. n/a n/a n/a n/a
Order Code
Example: XTTP4218FL 118
XT Crinion Open TableT WorksurfaceP Postformed42 Width18 DepthF File topL Finish type118 Surface
Specifications
File tops are 11/4� thick with squareedge or tapered edge option taperingto 1/2� thick front edge. Tapered edgefile tops are tapered front and backedges only.
Specify finishes:L - LaminateM - Laminate/veneer edge1 - Veneer group 12 - Veneer group 23 - Veneer group 3
Application Notes
File tops correspond to 30�, 36� or42�W lateral files. File tops on 2high Calibre files positionedperpendicular to the Crinion OpenTable serve as a worksurface return.
Knoll Office Tables
28
Complete base assembliesfixed height 24� D dual
description nominal w d h pattern number P1/P2 P3
Base assembly, continuous 10’ dual 120� 44� 281/2� XTB1 BAS 24D10CF ( )( ) $8,744. $8,975.12’ dual 144� 44� 281/2� XTB1 BAS 24D12CF ( )( ) 9,110. 9,343.15’ dual 180� 44� 281/2� XTB1 BAS 24D15CF ( )( ) 10,542. 10,782.
Base assembly, segmented 10’ + 5� dual 180� 44� 281/2� XTB1 BAS 24D15SF ( )( ) 11,309. 11,551.
Base assembly, with intermediate leg 12’ + 6� dual 216� 44� 281/2� XTB1 BAS 24D18SF ( )( ) 12,478. 12,719.10’ + 10’ dual 240� 44� 281/2� XTB1 BAS 24D20SF ( )( ) 13,639. 13,888.12’ + 12’ dual 288� 44� 281/2� XTB1 BAS 24D24SF ( )( ) 14,371. 14,621.15’ + 10’ dual 300� 44� 281/2� XTB1 BAS 24D25SF ( )( ) 15,437. 15,695.
Order Code
Example: XTB1BAS24D10CF 613AA
XT Crinion Open TableB1 Base componentsBAS Assembly24 DepthD Dual10 WidthC ContinuousF Fixed height613 Base finishAA Top channel finish
Specifications
Base assemblies include end legs,beams, trusses, cantilever brackets,channels and end caps.
Fixed height base assemblies haveshared cantilever brackets foradjacent worksurfaces and midspansupport brackets for everyworksurface.
1. Specify painted finish for baseassembly.For leg and cantilever bracketsspecify one paint finish for all.
2. Specify finish for top channel.AA anodized aluminum and allpaint finishes are availableexcept 613 Silver.Beams are anodized aluminumonly.
Application Notes
Complete base assemblies includeall base components necessary tosupport worksurfaces. Specifyscreens, power components andcable trays separately. Baseassemblies include end legs,intermediate leg (where required),beams, trusses, cantilever brackets,mid span support brackets, topchannel and end caps.
No table on this page has beamslonger than 15’.
Base assemblies correspond to:10’: four 60�x24�D worksurfaces12’: four 72�x24�D worksurfaces15’: six 60�X24�D worksurfaces18’: six 72�x24�D worksurfaces20’: eight 60�x24�D worksurfaces24’: eight 72�x24�D worksurfaces25’: ten 60�x24�D worksurfaces
Knoll Office Tables
29
Cri
nion
Ope
nTa
ble
Complete base assembliesfixed height 24� D single sided
description nominal w d h pattern number P1/P2 P3
Base assembly, continuous 10’ single sided 120� 24� 281/2� XTB1 BAS 24S10CF ( )( ) $7,867. $8,091.12’ single sided 144� 24� 281/2� XTB1 BAS 24S12CF ( )( ) 8,235. 8,456.15’ single sided 180� 24� 281/2� XTB1 BAS 24S15CF ( )( ) 9,340. 9,566.
Base assembly, segmented 10’ + 5� single sided 180� 24� 281/2� XTB1 BAS 24S15SF ( )( ) 10,108. 10,334.
Base assembly, with intermediate leg 12’ + 6� single sided 216� 24� 281/2� XTB1 BAS 24S18SF ( )( ) 11,276. 11,504.10’ + 10’ single sided 240� 24� 281/2� XTB1 BAS 24S20SF ( )( ) 12,110. 12,342.12’ + 12’ single sided 288� 24� 281/2� XTB1 BAS 24S24SF ( )( ) 12,842. 13,073.15’ + 10’ single sided 300� 24� 281/2� XTB1 BAS 24S25SF ( )( ) 13,581. 13,818.
Order Code
Example: XTB1BAS24S10CF 613118
XT Crinion Open TableB1 Base componentsBAS Assembly24 DepthS Single10 WidthC ContinuousF Fixed height613 Base finish118 Top channel finish
Specifications
Base assemblies include end legs,beams, trusses, cantilever brackets,channels and end caps.
Fixed height base assemblies haveshared cantilever brackets foradjacent worksurfaces and midspansupport brackets for everyworksurface.1. Specify base finish for base
assembly.For legs and cantilever bracketsspecify one paint finish for all.
2. Specify top channel finish.AA anodized aluminum and allpaint finishes are availableexcept 613 Silver.Beams are anodized aluminumonly.
Application Notes
Complete base assemblies includeall base components necessary tosupport worksurfaces. Specifyscreens, power components andcable trays separately. Baseassemblies include end legs,intermediate leg (where required),beams, trusses, cantilever brackets,mid span support brackets, topchannel and end caps.
No table on this page has beamslonger than 15’.
Base assemblies correspond to:10’: two 60�x24�D worksurfaces12’: two 72�x24�D worksurfaces15’: three 60�X24�D worksurfaces18’: three 72�x24�D worksurfaces20’: four 60�x24�D worksurfaces24’: four 72�x24�D worksurfaces25’: five 60�x24�D worksurfaces
Knoll Office Tables
30
Complete base assembliesfixed height 30� D dual
description nominal w d h pattern number P1/P2 P3
Base assembly, continuous 10’ dual 120� 54� 281/2� XTB1 BAS 30D10CF ( )( ) $10,405. $10,700.12’ dual 144� 54� 281/2� XTB1 BAS 30D12CF ( )( ) 10,829. 11,123.15’ dual 180� 54� 281/2� XTB1 BAS 30D15CF ( )( ) 12,606. 12,932.
Base assembly, segmented 10’ + 5� dual 180� 54� 281/2� XTB1 BAS 30D15SF ( )( ) 13,669. 13,995.
Base assembly, with intermediate leg 12’ + 6� dual 216� 54� 281/2� XTB1 BAS 30D18SF ( )( ) 15,145. 15,519.10’ + 10’ dual 240� 54� 281/2� XTB1 BAS 30D20SF ( )( ) 16,886. 17,290.12’ + 12’ dual 288� 54� 281/2� XTB1 BAS 30D24CF ( )( ) 17,737. 18,140.15’ + 10’ dual 300� 54� 281/2� XTB1 BAS 30D25CF ( )( ) 19,087. 19,522.
Order Code
Example: XTB1BAS30D18SF 613111
XT Crinion Open TableB1 Base componentsBAS Assembly30 DepthD Dual18 WidthS SegmentedF Fixed height613 Base finish111 Top channel finish
Specifications
Base assemblies include end legs,beams, trusses, cantilever brackets,channels and end caps.
Fixed height base assemblies haveshared cantilever brackets foradjacent worksurfaces and midspansupport brackets for everyworksurface.1. Specify base finish for base
assembly.For legs and cantilever bracketsspecify one paint finish for all.
2. Specify top channel finish.AA anodized aluminum and allpaint finishes are availableexcept 613 Silver.Beams are anodized aluminumonly.
Application Notes
Complete base assemblies includeall base components necessary tosupport worksurfaces. Specifyscreens, power components andcable trays separately. Baseassemblies include end legs,intermediate leg (where required),beams, trusses, cantilever brackets,mid span support brackets, topchannel and end caps.
No table on this page has beamslonger than 15’.
Base assemblies correspond to:10’: four 60�x30�D worksurfaces12’: four 72�x30�D worksurfaces15’: six 60�X30�D worksurfaces18’: six 72�x30�D worksurfaces20’: eight 60�x30�D worksurfaces24’: eight 72�x30�D worksurfaces25’: ten 60�x30�D worksurfaces
Knoll Office Tables
31
Cri
nion
Ope
nTa
ble
Complete base assembliesfixed height 30� D single sided
description nominal w d h pattern number P1/P2 P3
Base assembly, continuous 10’ single sided 120� 283/4� 281/2� XTB1 BAS 30S10CF ( )( ) $9,158. $9,414.12’ single sided 144� 283/4� 281/2� XTB1 BAS 30S12CF ( )( ) 9,583. 9,837.15’ single sided 180� 283/4� 281/2� XTB1 BAS 30S15CF ( )( ) 10,902. 11,173.
Base assembly, segmented 10’ + 5� single sided 180� 283/4� 281/2� XTB1 BAS 30S15SF ( )( ) 10,194. 10,463.
Base assembly, with intermediate leg 12’ + 6� single sided 216� 283/4� 281/2� XTB1 BAS 30S18SF ( )( ) 11,069. 11,337.10’ + 10’ single sided 240� 283/4� 281/2� XTB1 BAS 30S20SF ( )( ) 12,587. 12,873.12’ + 12’ single sided 288� 283/4� 281/2� XTB1 BAS 30S24SF ( )( ) 15,210. 15,494.15’ + 10’ single sided 300� 283/4� 281/2� XTB1 BAS 30S25SF ( )( ) 16,105. 16,404.
Order Code
Example: XTB1BAS30S15CF 613115
XT Crinion Open TableB1 Base componentsBAS Assembly30 DepthS Single15 WidthC ContinuousF Fixed height613 Base finish115 Top channel finish
Specifications
Base assemblies include end legs,beams, trusses, cantilever brackets,channels and end caps.
Fixed height base assemblies haveshared cantilever brackets foradjacent worksurfaces and midspansupport brackets for everyworksurface.1. Specify base finish for base
assembly.For legs and cantilever bracketsspecify one paint finish for all.
2. Specify top channel finish.AA anodized aluminum and allpaint finishes are availableexcept 613 Silver.Beams are anodized aluminumonly.
Application Notes
Complete base assemblies includeall base components necessary tosupport worksurfaces. Specifyscreens, power components andcable trays separately. Baseassemblies include end legs,intermediate leg (where required),beams, trusses, cantilever brackets,mid span support brackets, topchannel and end caps.
No table on this page has beamslonger than 15’.
Base assemblies correspond to:10’: two 60�x30�D worksurfaces12’: two 72�x30�D worksurfaces15’: three 60�X30�D worksurfaces18’: three 72�x30�D worksurfaces20’: four 60�x30�D worksurfaces24’: four 72�x30�D worksurfaces25’: five 60�x30�D worksurfaces
Knoll Office Tables
32
Complete base assembliesadjustable height 30� D dual
description nominal w d h pattern number P1/P2 P3
Base assembly, continuous 10’ dual 120� 54� 281/2� XTB1 BAS 30D10CA ( )( ) $10,559. $10,865.12’ dual 144� 54� 281/2� XTB1 BAS 30D12CA ( )( ) 10,984. 11,290.15’ dual 180� 54� 281/2� XTB1 BAS 30D15CA ( )( ) 13,050. 13,404.
Base assembly, segmented 10’ + 5� dual 180� 54� 281/2� XTB1 BAS 30D15SA ( )( ) 14,113. 14,468.
Base assembly, with intermediate leg 12’ + 6� dual 216� 54� 281/2� XTB1 BAS 30D18SA ( )( ) 15,589. 15,992.10’ + 10’ dual 240� 54� 281/2� XTB1 BAS 30D20SA ( )( ) 17,620. 18,070.12’ + 12’ dual 288� 54� 281/2� XTB1 BAS 30D24CA ( )( ) 18,471. 18,919.15’ + 10’ dual 300� 54� 281/2� XTB1 BAS 30D25CA ( )( ) 20,113. 20,609.
Order Code
Example: XTB1BAS30D18SA 613118
XT Crinion Open TableB1 Base componentsBAS Assembly30 DepthD Dual18 WidthS SegmentedA Adjustable height613 Base finish118 Top channel finish
Specifications
Base assemblies include end legs,beams, trusses, cantilever brackets,channels and end caps.1. Specify base finish for base
assembly.For legs and cantilever bracketsspecify one paint finish for all.
2. Specify top channel finish.AA anodized aluminum and allpaint finishes are availableexcept 613 Silver.Beams are anodized aluminumonly.
Application Notes
Complete base assemblies includeall base components necessary tosupport worksurfaces. Specifyscreens, power components andcable trays separately. Baseassemblies include end legs,intermediate leg (where required),beams, trusses, cantilever brackets,top channel and end caps.
No table on this page has beamslonger than 15’.
Base assemblies correspond to:10’: four 60�x30�D worksurfaces12’: four 72�x30�D worksurfaces15’: six 60�X30�D worksurfaces18’: six 72�x30�D worksurfaces20’: eight 60�x30�D worksurfaces24’: eight 72�x30�D worksurfaces25’: ten 60�x30�D worksurfaces
Knoll Office Tables
33
Cri
nion
Ope
nTa
ble
Complete base assembliesadjustable height 30� D single sided
description nominal w d h pattern number P1/P2 P3
Base assembly, continuous 10’ single sided 120� 283/4� 281/2� XTB1 BAS 30S10CA ( )( ) $9,260. $9,518.12’ single sided 144� 283/4� 281/2� XTB1 BAS 30S12CA ( )( ) 9,684. 9,943.15’ single sided 180� 283/4� 281/2� XTB1 BAS 30S15CA ( )( ) 11,160. 11,443.
Base assembly, segmented 10’ +5’ single sided 180� 283/4� 281/2� XTB1 BAS 30S15SA ( )( ) 10,453. 10,736.
Base assembly, with intermediate leg 12’ + 6� single sided 216� 283/4� 281/2� XTB1 BAS 30S18SA ( )( ) 11,562. 11,846.10’ + 10’ single sided 240� 283/4� 281/2� XTB1 BAS 30S20SA ( )( ) 13,002. 13,311.12’ + 12’ single sided 288� 283/4� 281/2� XTB1 BAS 30S24SA ( )( ) 15,624. 15,932.15’ + 10’ single sided 300� 283/4� 281/2� XTB1 BAS 30S25SA ( )( ) 16,675. 17,006.
Order Code
Example: XTB1BAS30S18SA 613AA
XT Crinion Open TableB1 Base componentsBAS Assembly30 DepthS Single18 WidthS SegmentedA Adjustable height613 Base finishAA Top channel finish
Specifications
Base assemblies include end legs,beams, trusses, cantilever brackets,channels and end caps.1. Specify base finish for base
assembly.For legs and cantilever bracketsspecify one paint finish for all.
2. Specify top channel finish.AA anodized aluminum and allpaint finishes are availableexcept 613 Silver.Beams are anodized aluminumonly.
Application Notes
Complete base assemblies includeall base components necessary tosupport worksurfaces. Specifyscreens, power components andcable trays separately. Baseassemblies include end legs,intermediate leg (where required),beams, trusses, cantilever brackets,top channel and end caps.
No table on this page has beamslonger than 15’.
Base assemblies correspond to:10’: two 60�x30�D worksurfaces12’: two 72�x30�D worksurfaces15’: three 60�X30�D worksurfaces18’: three 72�x30�D worksurfaces20’: four 60�x30�D worksurfaces24’: four 72�x30�D worksurfaces25’: five 60�x30�D worksurfaces
Knoll Office Tables
34
Complete base assembliesfixed height 36� D dual
description nominal w h d pattern number P1/P2 P3
Base assembly, continuous 10’ dual 120� 281/2� 54� XTB1 BAS 36D10CF ( )( ) $10,546. $10,842.12’ dual 144� 281/2� 54� XTB1 BAS 36D12CF ( )( ) 10,971. 11,266.15’ dual 180� 281/2� 54� XTB1 BAS 36D15CF ( )( ) 12,794. 13,121.
Base assembly, segmented 10’ + 5� dual 180� 281/2� 54� XTB1 BAS 36D15SF ( )( ) 13,858. 14,185.
Base assembly, with intermediate leg 12’ + 6� dual 216� 281/2� 54� XTB1 BAS 36D18SF ( )( ) 15,334. 15,707.10’ + 10’ dual 240� 281/2� 54� XTB1 BAS 36D20SF ( )( ) 17,122. 17,526.12’ + 12’ dual 288� 281/2� 54� XTB1 BAS 36D24CF ( )( ) 17,971. 18,375.15’ + 10’ dual 300� 281/2� 54� XTB1 BAS 36D25CF ( )( ) 19,370. 19,805.
Order Code
Example: XTB1BAS36D18SF 613111
XT Crinion Open TableB1 Base componentsBAS Assembly36 DepthD Dual18 WidthS SegmentedF Fixed height613 Base finish111 Top channel finish
Specifications
Base assemblies include end legs,beams, trusses, cantilever brackets,channels and end caps.
Fixed height base assemblies haveshared cantilever brackets foradjacent worksurfaces and midspansupport brackets for everyworksurface.1. Specify base finish for base
assembly.For legs and cantilever bracketsspecify one paint finish for all.
2. Specify top channel finish.AA anodized aluminum and allpaint finishes are availableexcept 613 Silver.Beams are anodized aluminumonly.
Application Notes
Complete base assemblies includeall base components necessary tosupport worksurfaces. Specifyscreens, power components andcable trays separately. Baseassemblies include end legs,intermediate leg (where required),beams, trusses, cantilever brackets,mid span support brackets, topchannel and end caps.
No table on this page has beamslonger than 15’.
Base assemblies correspond to:10’: four 60�x36�D worksurfaces12’: four 72�x36�D worksurfaces15’: six 60�X36�D worksurfaces18’: six 72�x36�D worksurfaces20’: eight 60�x36�D worksurfaces24’: eight 72�x36�D worksurfaces25’: ten 60�x36�D worksurfaces
Knoll Office Tables
35
Cri
nion
Ope
nTa
ble
Complete base assembliesfixed height 36� D single sided
description nominal w d h pattern number P1/P2 P3
Base assembly, continuous 10’ single sided 120� 283/4� 281/2� XTB1 BAS 36S10CF ( )( ) $9,300. $9,554.12’ single sided 144� 283/4� 281/2� XTB1 BAS 36S12CF ( )( ) 9,724. 9,979.15’ single sided 180� 283/4� 281/2� XTB1 BAS 36S15CF ( )( ) 11,092. 11,361.
Base assembly, segmented 10’ + 5� single sided 180� 283/4� 281/2� XTB1 BAS 36S15SF ( )( ) 10,383. 10,653.
Base assembly, with intermediate leg 12’ + 6� single sided 216� 283/4� 281/2� XTB1 BAS 36S18SF ( )( ) 11,493. 11,763.10’ + 10’ single sided 240� 283/4� 281/2� XTB1 BAS 36S20SF ( )( ) 12,825. 13,109.12’ + 12’ single sided 288� 283/4� 281/2� XTB1 BAS 36S24SF ( )( ) 15,447. 15,731.15’ + 10’ single sided 300� 283/4� 281/2� XTB1 BAS 36S25SF ( )( ) 16,387. 16,688.
Order Code
Example: XTB1BAS36S18SF 613AA
XT Crinion Open TableB1 Base componentsBAS Assembly36 DepthS Single18 WidthS SegmentedF Fixed height613 Base finishAA Top channel finish
Specifications
Base assemblies include end legs,beams, trusses, cantilever brackets,channels and end caps.
Fixed height base assemblies haveshared cantilever brackets foradjacent worksurfaces and midspansupport brackets for everyworksurface.1. Specify base finish for base
assembly.For legs and cantilever bracketsspecify one paint finish for all.
2. Specify top channel finish.AA anodized aluminum and allpaint finishes are availableexcept 613 Silver.Beams are anodized aluminumonly.
Application Notes
Complete base assemblies includeall base components necessary tosupport worksurfaces. Specifyscreens, power components andcable trays separately. Baseassemblies include end legs,intermediate leg (where required),beams, trusses, cantilever brackets,mid span support brackets, topchannel and end caps.
No table on this page has beamslonger than 15’.
Base assemblies correspond to:10’: two 60�x36�D worksurfaces12’: two 72�x36�D worksurfaces15’: three 60�X36�D worksurfaces18’: three 72�x36�D worksurfaces20’: four 60�x36�D worksurfaces24’: four 72�x36�D worksurfaces25’: five 60�x36�D worksurfaces
Knoll Office Tables
36
Complete base assembliesadjustable height 36� D dual
description nominal w d h pattern number P1/P2 P3
Base assembly, continuous 10’ dual 120� 54� 281/2� XTB1 BAS 36D10CA ( )( ) $10,700. $11,006.12’ dual 144� 54� 281/2� XTB1 BAS 36D12CA ( )( ) 11,123. 11,433.15’ dual 180� 54� 281/2� XTB1 BAS 36D15CA ( )( ) 13,240. 13,594.
Base assembly, segmented 10’ + 5� dual 180� 54� 281/2� XTB1 BAS 36D15SA ( )( ) 14,302. 14,655.
Base assembly, with intermediate leg 12’ + 6� dual 216� 54� 281/2� XTB1 BAS 36D18SA ( )( ) 15,778. 16,180.10’ + 10’ dual 240� 54� 281/2� XTB1 BAS 36D20SA ( )( ) 17,856. 18,305.12’ + 12’ dual 288� 54� 281/2� XTB1 BAS 36D24CA ( )( ) 18,707. 19,155.15’ + 10’ dual 300� 54� 281/2� XTB1 BAS 36D25CA ( )( ) 20,395. 20,892.
Order Code
Example: XTB1BAS36D18SA 613115
XT Crinion Open TableB1 Base componentsBAS Assembly36 DepthD Dual18 WidthS SegmentedA Adjustable height613 Base finish115 Top channel finish
Specifications
Base assemblies include end legs,beams, trusses, cantilever brackets,channels and end caps.1. Specify base finish for base
assembly.For legs and cantilever bracketsspecify one paint finish for all.
2. Specify top channel finish.AA anodized aluminum and allpaint finishes are availableexcept 613 Silver.Beams are anodized aluminumonly.
Application Notes
Complete base assemblies includeall base components necessary tosupport worksurfaces. Specifyscreens, power components andcable trays separately. Baseassemblies include end legs,intermediate leg (where required),beams, trusses, cantilever brackets,top channel and end caps.
No table on this page has beamslonger than 15’.
Base assemblies correspond to:10’: four 60�x36�D worksurfaces12’: four 72�x36�D worksurfaces15’: six 60�X36�D worksurfaces18’: six 72�x36�D worksurfaces20’: eight 60�x36�D worksurfaces24’: eight 72�x36�D worksurfaces25’: ten 60�x36�D worksurfaces
Knoll Office Tables
37
Cri
nion
Ope
nTa
ble
Complete base assembliesadjustable height 36� D single sided
description nominal w d h pattern number P1/P2 P3
Base assembly, continuous 10’ single sided 120� 283/4� 281/2� XTB1 BAS 36S10CA ( )( ) $9,401. $9,661.12’ single sided 144� 283/4� 281/2� XTB1 BAS 36S12CA ( )( ) 9,826. 10,085.15’ single sided 180� 283/4� 281/2� XTB1 BAS 36S15CA ( )( ) 11,350. 11,634.
Base assembly, segmented 10’ + 5� single sided 180� 283/4� 281/2� XTB1 BAS 36S15SA ( )( ) 10,641. 10,925.
Base assembly, with intermediate leg 12’ + 6� single sided 216� 283/4� 281/2� XTB1 BAS 36S18SA ( )( ) 11,751. 12,035.10’ + 10’ single sided 240� 283/4� 281/2� XTB1 BAS 36S20SA ( )( ) 13,240. 13,545.12’ + 12’ single sided 288� 283/4� 281/2� XTB1 BAS 36S24SA ( )( ) 15,861. 16,167.15’ + 10’ single sided 300� 283/4� 281/2� XTB1 BAS 36S25SA ( )( ) 16,960. 17,290.
Order Code
Example: XTB1BAS36S18SA 613AA
XT Crinion Open TableB1 Base componentsBAS Assembly36 DepthS Single18 WidthS SegmentedA Adjustable height613 Base finishAA Top channel finish
Specifications
Base assemblies include end legs,beams, trusses, cantilever brackets,channels and end caps.1. Specify base finish for base
assembly.For legs and cantilever bracketsspecify one paint finish for all.
2. Specify top channel finish.AA anodized aluminum and allpaint finishes are availableexcept 613 Silver.Beams are anodized aluminumonly.
Application Notes
Complete base assemblies includeall base components necessary tosupport worksurfaces. Specifyscreens, power components andcable trays separately. Baseassemblies include end legs,intermediate leg (where required),beams, trusses, cantilever brackets,top channel and end caps.
No table on this page has beamslonger than 15’.
Base assemblies correspond to:10’: two 60�x36�D worksurfaces12’: two 72�x36�D worksurfaces15’: three 60�X36�D worksurfaces18’: three 72�x36�D worksurfaces20’: four 60�x36�D worksurfaces24’: four 72�x36�D worksurfaces25’: five 60�x36�D worksurfaces
Knoll Office Tables
38
Top channels
description nominal w d h pattern number list price
Top channel 4’ 48� 21/2� 2� XTC1 48 ( ) $158.5’ 60� 21/2� 2� XTC1 60 ( ) 201.6’ 72� 21/2� 2� XTC1 72 ( ) 236.8’ 96� 21/2� 2� XTC1 96 ( ) 320.10’ 120� 21/2� 2� XTC1 120 AA 402.12’ 144� 21/2� 2� XTC1 144 AA 473.
Top channel end cap 21/2� 2� XTC1 END ( ) 36.
Top channel forframeless glass addups
4’ 48� 21/2� 2� XTCA1 48 ( ) 236.5’ 60� 21/2� 2� XTCA1 60 ( ) 284.6’ 72� 21/2� 2� XTCA1 72 ( ) 336.8’ 96� 21/2� 2� XTCA1 96 ( ) 437.10’ 120� 21/2� 2� XTCA1 120 AA 532.12’ 144� 21/2� 2� XTCA1 144 AA 662.
Top channel filler 48� XTCF 48 ( ) 30.60� XTCF 60 ( ) 41.72� XTCF 72 ( ) 41.
Order Code
Example: XTC1120AA
XT Crinion open tableC1 Top channel120 WidthAA Finish
Specifications
Top channels are extrudedaluminum with natural anodizedfinish AA or any standard paintedfinish except 613 Silver.
Top channel end caps are die castaluminum AA or any standardpainted finish except 613 Silver.
Top channel filler is 812 Easy Greyor 111 Black.
Application Notes
Crinion Open Table top channelsupports privacy screens andsuspended raceway components atany point. Top channel is requiredat the center of dual tables.
Top channels and end caps areincluded in complete baseassemblies.
Top channels correspond in width toone or two worksurface widths.
Knoll Office Tables
39
Cri
nion
Ope
nTa
ble
Beams for single sided or dual tables24� D
description nominal w d h pattern number list price
Starter beam set for 24� D 5’ 52� 3� 8� XTB1TB5C $1,063.6’ 64� 3� 8� XTB1TB6C 1,181.8’ 88� 3� 8� XTB1TB8C 1,418.10’ 112� 3� 8� XTB1TB10C 1,714.12’ 136� 3� 8� XTB1TB12C 2,008.15’ 172� 3� 8� XTB1TB15C 2,479.
Extension beam set for 24� D tables 4’ 48� 3� 8� XTB1TB4E 1,418.5’ 60� 3� 8� XTB1TB5E 1,535.6’ 72� 3� 8� XTB1TB6E 1,653.8’ 96� 3� 8� XTB1TB8E 1,889.10’ 120� 3� 8� XTB1TB10E 2,185.12’ 144� 3� 8� XTB1TB12E 2,479.15’ 180� 3� 8� XTB1TB15E 2,953.
Order Code
Example: XTB1TB15C
XT Crinion Open TableB1 Base componentsTB Dual beam set15 WidthC Starter
Specifications
Beams are extruded aluminum withnatural anodized finish.
Application Notes
Crinion Open Table bases areassembled from beams, end legs orend panels, intermediate legs andtrusses.
Beam sets can be used with eitherdual or single sided tables. Tablebases require one starter beam andextension beam adding up to thelength as the sum of the worksurfacewidths on one side.
Extension beam sets are specifiedonly to add on to starter sets or otherextension beams.
Beam sets must be supported byintermediate legs at least every 16’.Intermediate leg must be positionedat beam truss location, where twoworksurfaces meet.
Knoll Office Tables
40
Beams for dual tables30� and 36� D
description nominal w h pattern number list price
Starter beam set for dual table30� or 36� (pair of beams)
5’ 52� 3� 8� XTB1DB5C $1,418.6’ 64� 3� 8� XTB1DB6C 1,535.8’ 88� 3� 8� XTB1DB8C 2,008.10’ 112� 3� 8� XTB1DB10C 2,362.12’ 136� 3� 8� XTB1DB12C 2,716.15’ 172� 3� 8� XTB1DB15C 3,189.
Extension beam set for dual table30� or 36� (pair of beams)
4’ 48� 3� 8� XTB1DB4E 1,889.5’ 60� 3� 8� XTB1DB5E 1,889.6’ 72� 3� 8� XTB1DB6E 2,008.8’ 96� 3� 8� XTB1DB8E 2,479.10’ 120� 3� 8� XTB1DB10E 2,834.12’ 144� 3� 8� XTB1DB12E 3,189.15’ 180� 3� 8� XTB1DB15E 3,662.
Order Code
Example: XTB1DB15C
XT Crinion Open TableB1 Base componentsDB Dual beam set15 WidthC Starter
Specifications
Beams are extruded aluminum withnatural anodized finish.
Beam sets are starter or extension.
Extension beam sets are specifiedonly to add on to starter sets or otherextension beams.
Application Notes
Crinion Open Table bases areassembled from beams, end legs orend panels, intermediate legs andtrusses. Beam sets may be used witheither worksurface depth. Dualtables require one pair of mainbeams of the same nominal width asthe sum of the worksurfaces on eachside.
Beam sets must be supported byintermediate legs at least every 16’.Intermediate leg must be positionedat beam truss location, where twoworksurfaces meet.
Knoll Office Tables
41
Cri
nion
Ope
nTa
ble
Beams for single sided tables30� and 36� D
description nominal w d h pattern number list price
Starter beam set for single sided table30� or 36� ( main and back beam)
5’ 52� 8� XTB1SB5C $1,241.6’ 64� 8� XTB1SB6C 1,299.8’ 88� 8� XTB1SB8C 1,714.10’ 112� 8� XTB1SB10C 2,008.12’ 136� 8� XTB1SB12C 2,362.15’ 172� 8� XTB1SB15C 2,716.
Extension beam set for single sided table30� or 36� ( main and back beam )
4’ 48� 8� XTB1SB4E 1,653.5’ 60� 8� XTB1SB5E 1,714.6’ 72� 8� XTB1SB6E 1,772.8’ 96� 8� XTB1SB8E 2,185.10’ 120� 8� XTB1SB10E 2,479.12’ 144� 8� XTB1SB12E 2,834.15’ 180� 8� XTB1SB15E 3,189.
Order Code
Example: XTB1DB15C
XT Crinion Open TableB1 Base componentsDB Dual beam set15 WidthC Starter
Specifications
Beams are extruded aluminum withnatural anodized finish.
Beam sets are starter or extension.
Extension beam sets are specifiedonly to add on to starter sets or otherextension beams.
Application Notes
Crinion Open Table bases areassembled from beams, end legs orend panels, intermediate legs andtrusses. Beam sets may be used witheither worksurface depth. Singlesided tables require one pair ofmain beams of the same nominalwidth as the sum of theworksurfaces on each side.
Beam sets must be supported byintermediate legs at least every 16’.Intermediate leg must be positionedat beam truss location, where twoworksurfaces meet.
Knoll Office Tables
42
End legs, intermediate leg sets for dual tables
description application w d h pattern number P1/P2 P3
End leg for dual tables(pair of legs for 36�D worksurface)
24� D worksurface 4� 44� 24� XTB1EDD24 ( ) $4,275. $4,488.30� D worksurface 4� 54� 24� XTB1EDD30 ( ) 4,275. 4,488.36� D worksurface 4� 54� 24� XTB1EDD36 ( ) 4,275. 4,488.
Intermediate leg for dual table(pair of legs for 30� and 36�D)
24� D worksurfaces 4� 23/4� 16� XTB2LDD24 ( ) 513. 513.30�&36� D worksurfaces 4� 23/4� 16� XTB2LDD ( ) 564. 564.
Shroud for intermediate leg infeed kit 24� D or single sided 33/4� 21/2� 15� XTB1 SLIK ( ) 161. 169.30� D 11� 4� 15� XTB1 SLIK30 ( ) 203. 213.36� D 23� 4� 15� XTB1 SLIK36 ( ) 238. 251.
End leg for end counters both ends(pair of legs for 36�D worksurface)
48� W end counter 4� 44� 24� XTB1XDD24 ( ) 4,570. 4,784.60� W end counter 4� 54� 24� XTB1XDD30 ( ) 4,570. 4,784.72� W end counter 4� 54� 24� XTB1XDD36 ( ) 4,570. 4,784.
Order Code
Example: XTB1EDD30 118
XT Crinion Open TableB1 Base componentsE End legD DualD Desk height30 Depth of tops118 Finish
Specifications
Specify paint finish code afterpattern number.
Application Notes
Crinion Open Table bases areassembled from main beams, endlegs or end panels, intermediatelegs and trusses. After selectingstarter or segmented beam sets,specify legs to support each end ofbeams. End legs support mainbeams at each end of a table.
Dual end legs for end counters havethreaded metal inserts on theoutside of the leg to accept two fixedheight or adjustable cantilevers forend counters.
Intermediate legs must be specifiedto provide support under beam setsspanning longer than 16’.Intermediate legs may be positionedunder beams at any beam trusslocation. End legs include beam endplates and hardware.
Shroud for intermediate leg kitencloses the space between legs toprotect power, data andcommunication cables between floorand table base. Side covers may beremoved for access.
Shroud for 24�d intermediate leg isU-shaped cover that attaches to sideof intermediate leg for 24�d or anysingle sided intermediate leg.
End legs for 24�D worksurfaces andend legs for 48�W end countershave only one end plate forattaching a single centered beam for24�D tables.
End legs for 30�D and 36�Dworksurfaces and end legs for 60�Wand 72�W end counters have twoend plates for attaching two beamsfor 30�D and 36�D tables.
Knoll Office Tables
43
Cri
nion
Ope
nTa
ble
End legs, intermediate leg sets for dual tables
description application w d h pattern number P1/P2 P3
End leg for end counters one end only(pair of legs for 36�D worksurface)
48� W end counter 4� 44� 24� XTB1YDD24 ( ) $4,423. $4,636.60� W end counter 4� 54� 24� XTB1YDD30 ( ) 4,423. 4,636.72� W end counter 4� 54� 24� XTB1YDD36 ( ) 4,423. 4,636.
Order Code
Example: XTB1EDD30 118
XT Crinion Open TableB1 Base componentsE End legD DualD Desk height30 Depth of tops118 Finish
Specifications
Specify paint finish code afterpattern number.
Application Notes
Crinion Open Table bases areassembled from main beams, endlegs or end panels, intermediatelegs and trusses. After selectingstarter or segmented beam sets,specify legs to support each end ofbeams. End legs support mainbeams at each end of a table.
Dual end legs for end counters havethreaded metal inserts on theoutside of the leg to accept two fixedheight or adjustable cantilevers forend counters.
Intermediate legs must be specifiedto provide support under beam setsspanning longer than 16’.Intermediate legs may be positionedunder beams at any beam trusslocation. End legs include beam endplates and hardware.
Shroud for intermediate leg kitencloses the space between legs toprotect power, data andcommunication cables between floorand table base. Side covers may beremoved for access.
Shroud for 24�d intermediate leg isU-shaped cover that attaches to sideof intermediate leg for 24�d or anysingle sided intermediate leg.
End legs for 24�D worksurfaces andend legs for 48�W end countershave only one end plate forattaching a single centered beam for24�D tables.
End legs for 30�D and 36�Dworksurfaces and end legs for 60�Wand 72�W end counters have twoend plates for attaching two beamsfor 30�D and 36�D tables.
Knoll Office Tables
44
End legs, intermediate leg sets for single sided tables
description application width depth height pattern number P1/P2 P3
End leg for single sided tables(pair of legs)
24� D worksurface 4� 24� 24� XTB1ESD24 ( ) $4,275. $4,488.30� D worksurface 4� 283/4� 24� XTB1ESD30 ( ) 4,275. 4,488.36� D worksurface 4� 283/4� 24� XTB1ESD36 ( ) 4,275. 4,488.
Intermediate leg for single sided table 24� D worksurfaces 4� 23/4� 16� XTB2LSD24 ( ) 461. 461.30�&36� D worksurfaces 4� 23/4� 16� XTB2LSD ( ) 564. 564.
Order Code
Example: XTB1ESD30 118
XT Crinion Open TableB1 Base componentsE End legS SingleD Desk height30 Depth of tops118 Finish
Specifications
Specify paint finish code afterpattern number.
Application Notes
Crinion Open Table bases areassembled from main beams, endlegs or end panels, intermediatelegs and trusses. After selectingstarter or segmented beam sets,specify legs to support each end ofbeams. End legs support mainbeams at each end of a table.
Dual end legs for end counters havethreaded metal inserts on theoutside of the leg to accept two fixedheight or adjustable cantilvers forend counters.
Intermediate legs must be specifiedto provide support under beam setsspanning longer than 16’.Intermediate legs may be positionedunder beams at any beam trusslocation. End legs include beam endplates and hardware.
Shroud for intermediate leg kitencloses the space between legs toprotect power, data andcommunication cables between floorand table base. Side covers may beremoved for access.
Knoll Office Tables
45
Cri
nion
Ope
nTa
ble
End panels for dual tables and single sided tables, painted
description application width depth height pattern no. P1/P2/P3
End panels for dual tables(pair of end panels)
24� D worksurface 11/4� 46� 251/2� XTB1EP2DD24P( )( ) $2,255.30� D worksurface 11/4� 58� 251/2� XTB1EP2DD30P( )( ) 3,178.36� D worksurface 11/4� 70� 251/2� XTB1EP2DD36P( )( ) 3,383.
End panels for dual tables(single end panel)
24� D worksurface 11/4� 46� 251/2� XTB1EP1DD24P( )( ) 1,128.30� D worksurface 11/4� 58� 251/2� XTB1EP1DD30P( )( ) 1,589.36� D worksurface 11/4� 70� 251/2� XTB1EP1DD36P( )( ) 1,691.
End panels for single sided tables(pair of end panels)
24� D worksurface 11/4� 253/16� 251/2� XTB1EP2SD24P( )( ) 1,999.30� D worksurface 11/4� 303/16� 251/2� XTB1EP2SD30P( )( ) 2,870.36� D worksurface 11/4� 363/16� 251/2� XTB1EP2SD36P( )( ) 2,973.
End panels for single sided tables(single end panel)
LH ShownRH Opposite
24� D worksurface, Left 11/4� 253/16� 251/2� XTB1EP1LD24P( )( ) 999.24� D worksurface, Right 11/4� 253/16� 251/2� XTB1EP1RD24P( )( ) 999.30� D worksurface, Left 11/4� 303/16� 251/2� XTB1EP1LD30P( )( ) 1,435.30� D worksurface, Right 11/4� 303/16� 251/2� XTB1EP1RD30P( )( ) 1,435.36� D worksurface, Left 11/4� 363/16� 251/2� XTB1EP1LD36P( )( ) 1,486.36� D worksurface, Right 11/4� 363/16� 251/2� XTB1EP1RD36P( )( ) 1,486.
Order Code
Example: XTB1EP2DD 24P118118
XT Crinion Open TableB1 Base componentsEP2 End panelD DualD Desk Height24 Depth of topsP Finish118 Finish118 Finish
Specification
Specify paint finish for brackets,then specify paint finish for endpanel.
Application Notes
End panels may be specified as analternative to End legs to supporteach end of beams.
End panel kits include end panel,connecting hardware and supportlegs.
End panel kits are not compatiblewith end counters.
Knoll Office Tables
46
End panels for dual tables and single sided tables, laminateand veneer
description application w d h pattern no. L V1 V2 V3
End panels for dual tables(pair of end panels)
24� D worksurface 11/4� 46� 251/2� XTB1EP2DD24( )( ) $2,358. $2,460. $2,973. $3,075.30� D worksurface 11/4� 58� 251/2� XTB1EP2DD30( )( ) 3,280. 3,485. 3,998. 4,203.36� D worksurface 11/4� 70� 251/2� XTB1EP2DD36( )( ) 3,485. 3,588. 4,203. 4,408.
End panel for dual tables(single end panel)
24� D worksurface 11/4� 46� 251/2� XTB1EP1DD24( )( ) 1,179. 1,230. 1,486. 1,538.30� D worksurface 11/4� 58� 251/2� XTB1EP1DD30( )( ) 1,640. 1,743. 1,999. 2,101.36� D worksurface 11/4� 70� 251/2� XTB1EP1DD36( )( ) 1,743. 1,794. 2,101. 2,204.
End panels for single sided tables(pair of end panels)
24� D worksurface 11/4� 253/16� 251/2� XTB1EP2SD24( )( ) 2,101. 2,255. 2,563. 2,665.30� D worksurface 11/4� 303/16� 251/2� XTB1EP2SD30( )( ) 2,973. 3,178. 3,485. 3,690.36� D worksurface 11/4� 363/16� 251/2� XTB1EP2SD36( )( ) 3,075. 3,280. 3,690. 3,895.
End panel for single sided tables(single end panel)
LH ShownRH Opposite
24� D worksurface, Left 11/4� 253/16� 251/2� XTB1EP1LD24( )( ) 1,051. 1,128. 1,281. 1,333.24� D worksurface, Right 11/4� 253/16� 251/2� XTB1EP1RD24( )( ) 1,051. 1,128. 1,281. 1,333.30� D worksurface, Left 11/4� 303/16� 251/2� XTB1EP1LD30( )( ) 1,486. 1,589. 1,743. 1,845.30� D worksurface, Right 11/4� 303/16� 251/2� XTB1EP1RD30( )( ) 1,486. 1,589. 1,743. 1,845.36� D worksurface, Left 11/4� 363/16� 251/2� XTB1EP1LD36( )( ) 1,538. 1,640. 1,845. 1,948.36� D worksurface, Right 11/4� 363/16� 251/2� XTB1EP1RD36( )( ) 1,538. 1,640. 1,845. 1,948.
Order Code
Example: XTB1EP2DD 24118 118
XT Crinion Open TableB1 Base componentsEP2 End panelD DualD Desk Height24 Depth of tops118 Finish118 Finish
Specifications
Specify paint finish for brackets,then specify laminate or veneerfinish for end panel.
Brushed and woodgrain laminatesare not available on 70� wide endpanels for use on 36�D dual sidedtables.
Application Notes
End panels may be specified as analternative to End legs to supporteach end of beams.
End panel kits include end panel,connecting hardware and supportlegs.
End panel kits are not compatiblewith end counters.
Knoll Office Tables
47
Cri
nion
Ope
nTa
ble
Beam trusses
description application w d h pattern number P1/P2/P3
Beam truss for dual tables 30� D worksurface 3� 11� 10� XTB1XD30 ( ) $521.36� D worksurface 3� 23� 10� XTB1XD36 ( ) 567.
Top channel support 24� D worksurface XTB1T24 ( ) 188.
Beam truss for single sided tables 30� D worksurface 3� XTB1XS30 ( ) 521.36� D worksurface 3� XTB1XS36 ( ) 567.
Beam truss for dual tablesno top channel support
30� D worksurface 3� 11� 8� XTB1XD30N ( ) 403.36� D worksurface 3� 23� 8� XTB1XD36N ( ) 462.
Beam truss for single sided tablesno top channel support
30� D worksurface 3� XTB1XS30N ( ) 403.36� D worksurface 3� XTB1XS36N ( ) 462.
Order Code
Example: XTB1XD30 613
XT Crinion Open TableB1 Base componentsXD Beam truss for dual table30 Depth613 Finish
Specifications
Beam trusses are available in allstandard painted finishes.
Application Notes
Crinion Open Table bases areassembled from beams, end legs orend panels, intermediate legs andtrusses. After selecting beams andleg kits, specify trusses betweenbeams.
Specify beam trusses adjacent toeach end leg and at eachworksurface junction.
For 24�D tables specify top channelsupport instead of truss.
Beam trusses with no top channelsupport must be specified incombination with intermediate legsplanned other than at worksurfacejunctions (as for cable infeedshrouds).
Knoll Office Tables
48
Worksurface supportcantilever and mid span support
description w d h pattern number P1/P2 P3
Cantilever, fixed height 30� or 36� D 3� 24� 9� XTB1FC ( ) $214. $223.
Cantilever, fixed height 24� D 3� 19� 9� XTB1FC24 ( ) 214. 223.
Cantilever, adjustable height 30� or 36� D 3� 24� 9� - 12� XTB1AC ( ) 236. 249.
Cantilever, adjustable height 24� D 3� 24� 9� - 12� XTB1AC24 ( ) 236. 249.
Mid span support 2 2 8 XTB1MB ( ) 101. 107.
Order Code
Example: XTB1FC 118
XT Crinion Open TableB1 Base componentsFC Fixed height cantilever118 Finish
Specifications
Specify paint finish code afterpattern number.
48�worksurfaces: sharedcantilevers each end or twoadjustable per worksurface.
60� and 72� worksurfaces: sharedcantilevers each end plus mid spansupport or two adjustablecantilevers inset 8�.
96�worksurfaces: sharedcantilevers at ends plus one incenter or three adjustablecantilevers.
96�x 24� with hinged door: sharedcantilever each end plus two midspan supports.
96�x 30� with hinged door: sharedcantilever each end plus 24�dcantilever as center support.
96�x 36� with hinged door: sharedcantilever each end plus 24�, 30�or 36�d cantilever as center support.
Application Notes
Cantilever brackets are required tosupport each end of worksurfaces.
Brackets can be positioned at endsof worksurface, or inset at legs orfloorstanding pedestal locations.
Fixed height cantilevers can beshared between adjacentworksurfaces. Mid span supportbracket must be specified forworksurface spans exceeding 4’.
Fixed height cantilever supportsworksurface at 281/2� H.
Adjustable cantilevers enableworksurfaces to be set at 27�, 273/4�,281/2�, 291/4� or 30� H.
Knoll Office Tables
49
Cri
nion
Ope
nTa
ble
Worksurface supportlinking plate and cantilever for end counters
description w d h pattern no. P1/P2 P3
Cantilever for end counters, fixed height 3� 19� 9� XTB1FCEND ( ) $214. $223.
Cantilever for end counters, adjustable height 3� 19� 9� - 12� XTB1ACEND ( ) 236. 249.
Worksurface linking plate XTB1LP 29.
Order Code
Example: XTB1FCEND 613
XT Crinion Open TableB1 Base componentsFC Fixed height cantileverEND for end counter613 Finish
Specification
Specify paint finish code afterpattern number.
Application Notes
Cantilever brackets are required tosupport each end of worksurface.
Brackets attach to inserts on theoutside face of end legs for endcounters.
Fixed height cantilever supports forend counter at 281/2� H.
Adjustable cantilevers for endcounter enables end counter to beset at 281/2�, 291/4� or 30� H.
A linking plate is recommended tojoin adjacent worksurfaces that areindependently supported at thesame height. Specify two linkingplates at the junction of twoworksurfaces, or four total for eachend counter to two worksurfaces. Alinking plate is not required whereadjacent tops are supported by ashared fixed height cantileverbracket, as with complete fixedheight base assemblies. Linkingplates are recommended forcomplete adjustable height baseassemblies in which tops are set atthe same height.
Knoll Office Tables
50
Modular Raceway2 + 2 eight-wire Raceway with covers
description type h w d pattern number list price
Dual raceway, two power + two data outlets eachside
4� 30� 2� XTR1E30D ( ) $280.
Dual raceway, four power + two data outlets eachside
4� 42� 2� XTR1E424D ( ) 402.
Flat end cover XTR1FE ( ) 24.
Extended end cover XTR1EE ( ) 24.
Single sided racewaytwo power + two data outlets one side
4� 30� 2� XTR1E30S ( ) 280.
Single sided racewayfour power + two data outlets one side
4� 42� 2� XTR1E424S ( ) 402.
Order Code
Example: XTR1E424D 613
XT Crinion Open TableR1 RacewayE Eight wire system42 Width4 Extra outletsD Dual Raceway613 Finish
Specifications
Eight wire 2+2 has two sets ofcircuits, each set with a separateground and neutral.
Specify paint finish code afterpattern number.
Covers have two openings fordata/com outlet modules(Decora-size, specified separately).
Applications notes
Raceway for Crinion Open Table issuspended from the top channel.For ideal access, worksurfacesshould be specified with hingedpower access.
Each raceway requires four or eightduplex outlets, on any of fourcircuits.
Jumpers connect power from oneraceway to another.
To join power between 30�raceways: specify 30� jumper for60� desks and specify 42� jumperfor 72� desks.
To join power between 42�raceways: specify 18� jumper for60� desks and 30� jumper for 72�desks.
Flat end covers enclose the end of araceway at the end of a table.
Extended end covers enclose theend of a raceway at the end of atable where power infeed is located.
Specify outlet fillers separately forunused outlet openings.
Knoll Office Tables
51
Cri
nion
Ope
nTa
ble
Modular Raceway2 + 2 eight-wire Raceway components
description type h w d pattern number list price
Modular infeed XTR1EPI $211.
NYC infeed kit XTR1EPH 483.
Jumper 18� XTR1EJ18 97.30� XTR1EJ30 111.42� XTR1EJ42 127.
Duplex outlet Circuit A XTR1DA 36.Circuit B XTR1DB 36.Circuit X, orange XTR1DXO 41.Circuit Y, orange XTR1DYO 41.
Outlet filler Set of 10 XTR1OF 30.
PDC module extension kit Set of 10 XTR1PDCX 123.
Compact Power Module XTR1ECPM ( ) 521.
Order Code
Example: XTR1EJ18
XT Crinion Open TableR1 RacewayE Eight wireJ Jumper18 Width
Specifications
Eight wire 2+2 has two sets ofcircuits, each set with a separateground and neutral.
Application Notes
Raceway for Crinion Open Table issuspended from the top channel.For ideal access, worksurfacesshould be specified with hingedpower access.
Each raceway requires four or eightduplex outlets, on any of fourcircuits.
Power infeed includes pigtail forconnection to building power supplyand connector to either end of anyraceway.
NYC infeed kit includes junctionbox that mounts to inside face ofbeams in table base.
Jumper length is difference betweenworksurface width and specifiedraceway width.
Compact power module is designedto supply power outlets underextended end counter worksurfaces,or additional outlets under desks.
Compact power module can besuspended from top channel orattached to inside face of beams.
Each face of compact power moduleaccepts two duplex outlets.
Knoll Office Tables
52
Modular Raceway3 + 3 ten-wire Raceway with covers
description type h w d pattern number list price
Dual raceway, two power + two data outlets eachside
4� 30� 2� XTR1T30D ( ) $293.
Dual raceway, four power + two data outlets eachside
4� 42� 2� XTR1T424D ( ) 415.
Flat end cover XTR1FE ( ) 24.
Extended end cover XTR1EE ( ) 24.
Single sided racewaytwo power + two data outlets one side
4� 30� 2� XTR1T30S ( ) 293.
Single sided racewayfour power + two data outlets one side
4� 42� 2� XTR1T424S ( ) 415.
Order Code
Example: XTR1T424D 613
XT Crinion Open TableR1 RacewayT Ten wire system42 Width4 Extra outletsD Dual Raceway613 Finish
Specifications
Ten wire 3+3 has two sets of threecircuits, each set with a separateground and neutral.
Specify paint finish code afterpattern number.
Covers have two openings fordata/com outlet modules(Decora-size, specified separately).
Application Notes
Raceway for Crinion Open Table issuspended from the top channel.For ideal access, worksurfacesshould be specified with hingedpower access.
Each raceway requires four or eightduplex outlets, on any of sixcircuits.
Jumpers connect power from oneraceway to another.
To join power between 30�raceways: specify 30� jumper for60� desks and specify 42� jumperfor 72� desks.
To join power between 42�raceways: specify 18� jumper for60� desks and 30� jumper for 72�desks.
Flat end covers enclose the end of araceway at the end of a table.
Extended end covers enclose theend of a raceway at the end of atable where power infeed is located.
Specify outlet fillers separately forunused outlet openings.
Knoll Office Tables
53
Cri
nion
Ope
nTa
ble
Modular Raceway3 + 3 ten-wire Raceway components
description type h w d pattern number list pricing
Modular infeed XTR1TPI $237.
NYC infeed kit XTR1TPH 483.
Jumper 18� XTR1TJ18 111.30� XTR1TJ30 127.42� XTR1TJ42 147.
Duplex outlet Circuit A XTR1DA 36.Circuit B XTR1DB 36.Circuit C XTR1DC 36.Circuit X, orange XTR1DXO 41.Circuit Y, orange XTR1DYO 41.Circuit Z, orange XTR1DZO 41.
Outlet filler Set of 10 XTR1OF 30.
PDC module extension kit Set of 10 XTR1PDCX 123.
Compact Power Module XTR1TCPM ( ) 536.
Order Code
Example: XTR1TJ18
XT Crinion Open TableR1 RacewayT Ten wireJ Jumper18 Width
Specifications
Ten wire 3+3 has two sets of threecircuits, each set with a separateground and neutral.
Application Notes
Raceway for Crinion Open Table issuspended from the top channel.For ideal access, worksurfacesshould be specified with hingedpower access.
Each raceway requires four or eightduplex outlets, on any of sixcircuits.
Power infeed includes pigtail forconnection to building power supplyand connector to either end of anyraceway.
NYC infeed kit includes junctionbox that mounts to inside face ofbeams in table base.
Jumper length is difference betweenworksurface width and specifiedraceway width.
Compact power module is designedto supply power outlets underextended end counter worksurfaces,or additional outlets under desks.
Compact power module can besuspended from top channel orattached to inside face of beams.
Each face of compact power moduleaccepts two duplex outlets.
Knoll Office Tables
54
Modular Raceway4-4-2 ten-wire Raceway with covers
description type h w d pattern number list price
Dual raceway, two power + two data outlets eachside
4� 30� 2� XTR1X30D ( ) $309.
Dual raceway, four power + two data outlets eachside
4� 42� 2� XTR1X424D ( ) 436.
Single sided racewaytwo power + two data outlets one side
4� 30� 2� XTR1X30S ( ) 309.
Single sided racewayfour power + two data outlets one side
4� 42� 2� XTR1X424S ( ) 436.
Order Code
Example: XTR1X424D 613
XT Crinion Open TableR1 RacewayX Ten wire 4-4-242 Width4 Extra outletsD Dual Raceway613 Finish
Specifications
Ten wire 4-4-2 has four circuitseach with a separate neutral, plus aground wire for circuit 1 and 2 andanother ground for circuit 3 and 4.
Specify paint finish code afterpattern number.
Covers have two openings fordata/com outlet modules(Decora-size, specified separately).
Application Notes
Raceway for Crinion Open Table issuspended from the top channel.For ideal access, worksurfacesshould be specified with hingedpower access.
Each raceway requires four or eightduplex outlets, on any of sixcircuits.
Jumpers connect power from oneraceway to another.
To join power between 30�raceways: specify 30� jumper for60� desks and specify 42� jumperfor 72� desks.
To join power between 42�raceways: specify 18� jumper for60� desks and 30� jumper for 72�desks.
Flat end covers enclose the end of araceway at the end of a table.
Extended end covers enclose theend of a raceway at the end of atable where power infeed is located.
Specify outlet fillers separately forunused outlet openings.
Knoll Office Tables
55
Cri
nion
Ope
nTa
ble
Modular Raceway4-4-2 ten-wire Raceway components
description type h w d pattern number list price
Modular infeed XTR1XPI $249.
NYC infeed kit XTR1XPH 506.
Jumper 18� XTR1XJ18 116.30� XTR1XJ30 133.42� XTR1XJ42 152.
Duplex outlet Circuit 1 XTR1D1 38.Circuit 2 XTR1D2 38.Circuit 3 XTR1D3 38.Circuit 4 XTR1D4 38.
Compact Power Module XTR1XCPM ( ) 536.
Order Code
Example: XTR1XJ18
XT Crinion Open TableR1 RacewayX Ten wire 4-4-2J Jumper18 Width
Specifications
Ten wire 4-4-2 has four circuitseach with a separate neutral, plus aground wire for circuit 1 and 2 andanother ground for circuit 3 and 4.
All duplex outlets are black.
Application Notes
Raceway for Crinion Open Table issuspended from the top channel.For ideal access, worksurfacesshould be specified with hingedpower access.
Each raceway requires four or eightduplex outlets, on any of sixcircuits.
Power infeed includes pigtail forconnection to building power supplyand connector to either end of anyraceway.
NYC infeed kit includes junctionbox that mounts to inside face ofbeams in table base.
Jumper length is difference betweenworksurface width and specifiedraceway width.
Compact power module is designedto supply power outlets underextended end counter worksurfaces,or additional outlets under desks.
Compact power module can besuspended from top channel orattached to inside face of beams.
Each face of compact power moduleaccepts two duplex outlets.
Knoll Office Tables
56
Hardwire Raceway
description type h w d pattern number list price
Dual raceway, two power + two data outlets eachside
4� 30� 2� XTR1H30D ( ) $610.
Flat end cover XTR1FE ( ) 24.
Extended end cover XTR1EE ( ) 24.
Outlet filler Set of 10 XTR1OF 30.
Order Code
Example: XTR1H30D 613
XT Crinion Open TableR1 RacewayH Hard wire system30 WidthD Dual Raceway613 Finish
Specifications
Specify paint finish code afterpattern number.
Hardwired raceway components aredesigned for use in City of Chicagoinstallations.
Covers have two openings fordata/com outlet modules(Decora-size, by others).
Application Notes
Raceway for Crinion Open Table issuspended from the top channel.For ideal access, worksurfacesshould be specified with hingedpower access.
Dual raceways are code-approvedboxed with openings for two or fourduplex outlets on each face, plustwo additional openings fordata/communications faceplates oneach face. A continuous horizontalmetal septum divides power wiresand connections from data andcommunications cables. Eachraceway requires Decora-typearchitecturual power outlets,internal wiring and connectingcables, supplied by electricalcontractor.
Flat end covers enclose the racewayat the end of a table. Extended endcovers provide an opening on theunderside to permit cables to enterthe raceway.
Specify outlet filler plates forunused outlet openings. SpecifyPDC extenders to create spacebehind data/com for cabledistribution inside dual raceway.
Knoll Office Tables
57
Cri
nion
Ope
nTa
ble
Cable tray and cable clips
description table size w d pattern number list price
Cable trays, leg position, pair 5’, 30�D 53� 1� XTCT6030LD ( ) $253.5’, 36�D 53� 4� XTCT6036LD ( ) 345.6’, 30�D 65� 1� XTCT7230LD ( ) 275.6’, 36�D 65� 4� XTCT7236LD ( ) 401.
Cable trays, full width, pair 5’, 30�D 60� 1� XTCT6030D ( ) 253.5’, 36�D 60� 4� XTCT6036D ( ) 345.6’, 30�D 72� 1� XTCT7230D ( ) 275.6’, 36�D 72� 4� XTCT7236D ( ) 401.
Data tray kit 42� XTDT42 ( ) 178.
Data + excess cable tray kit 42� XTDTX42 ( ) 295.
Truss cable clips, set of 25 XTR1TCC25 15.
Beam cable clips, set of 50 XTR1BCC50 236.
Random attachment kit, set of 10 XTB1RAK 82.
Order Code
Example: XTCT7230D 613
XT Crinion Open TableCT Cable tray72 Width30 DepthD Dual table613 Finish
Specifications
Cable trays and Data tray kits areavailable in all standard paintfinishes.
Applications notes
Cable trays are optional kits tomanage cables on each side of dualtable bases. Specify cable trays forleg position at each end of the table.Specify cable trays, full width forother positions.
Data tray kit provides 3� widehorizontal open cable tray directlybelow either 30� or 42�W racewaymodule (at center of 60� or 72�desks). Data + excess tray kitprovides two open trays below eitherraceway module, one 3�W and one5�W.
Truss cable clips manage cablesbetween raceway. Specify 2 clipsper truss (one set of 10 for each fivetrusses).
Beam cable clips manage cablesalong the inside faces of each beamset.
Random attachment kit is a set often M8 slot nuts for attachingvarious products to the CrinionOpen Table beams or top channel.Specify appropriate M8 screwsseparately.
Knoll Office Tables
58
Beam mounted cable trays and cable baskets
description application w d h pattern no. list
Beam mounted cable tray 24�D tables 18� 2� 3/4� XTBT18 ( ) $81.24�D tables 24� 2� 3/4� XTBT24 ( ) 90.24�D tables 36� 2� 3/4� XTBT36 ( ) 98.24�D tables 48� 2� 3/4� XTBT48 ( ) 108.24�D tables 60� 2� 3/4� XTBT60 ( ) 116.
Cable basket, 10’ 120� 8� 1� XTWB120 439.
Cable basket hangers From truss 30/36D only XTWTX ( ) 70.
From truss at infeed shroud XTWTBSLIK ( ) 214.
From main beam, 24D only XTWTB ( ) 70.
From top channel, 30/36D only XTWTC ( ) 91.
Order Code
Example: XTBT36 118
XT Crinion Open TableBT Beam mounted cable
tray36 Width118 Paint finish
Specifications
Beam mounted cable trays areavailable in any standard paintedfinish.
Cable basket is zinc metal finishonly.
Basket hangers can be specified inany standard painted finish.
Application Notes
Beam mounted cable trays may beinserted in slots on either face ofCrinion Open Table main beams. On24�D dual or single sided tablesbeam mounted cable trays are theonly option for cable managementother than the shallow channel ontop of the beam or a cable basket.On 30�D and 36�D tables beammounted trays may complementother cable tray options.
Beam mounted cable trays must besegmented to fit between cantileverand midspan support brackets.
For 48�W worksurfaces with sharedcantilevers specify 36�W trays.For 60�W worksurfaces with sharedcantilevers and midspan supportsspecify 24�W trays adjacent to endlegs specify 18�W trays.
For 72�W worksurfaces with sharedcantilevers and midspan supportsspecify 24�W trays.
For 96�W worksurfaces specify36�W trays between supports.Specify 48�W trays for additionalcable management between trusseson the inside face of beams on dual30�D and 36�D tables with 60�worksurfaces.Specify 60�W trays on the insideface of beams on dual 30�D and36�D tables with 72�Wworksurfaces.
Cable basket is suspended belowthe center of dual tables instead ofor in addition to cable trays. Cablebasket offers the most flexibility formanaging large bundles of cablesand for entering or exiting the tray atany point. Cable basket ships in 10’lengths and is cut to size in field.Specify cable basket hangersseparately. Each hanger cansuspend one end of a tray or twoadjacent trays. Hanger from trussesis for 30� or 36�D dual or singlesided tables. Hanger from mainbeam is for 24�D dual tables only.Hangers from top channel are for30� or 36�D dual tables only.
Knoll Office Tables
59
Cri
nion
Ope
nTa
ble
Center screensAcrylic, slatwall, combination, marker or veneer surface
description appl. w d h pattern no.Opal
acrylic
Trans.acrylic /Marker slatwall
Comb.acrylic /slatwall V1 V2 V3
Center screen to 43� H 48� 48� 11/4� 14� XTCS1 4814 ( )( )( ) $856. $885. $1,359. n/a $1,181. $1,294. $1,515.60� 60� 11/4� 14� XTCS1 6014 ( )( )( ) 1,122. 1,178. 1,476. n/a 1,277. 1,409. 1,689.72� 72� 11/4� 14� XTCS1 7214 ( )( )( ) 1,181. 1,237. 1,595. n/a 1,342. 1,495. 1,829.
acrylic shown
Center screen to 43� Hadjacent to end screen
48� 47� 11/4� 14� XTCS1 4714 ( )( )( ) 856. 885. 1,359. n/a 1,181. 1,294. 1,515.60� 59� 11/4� 14� XTCS1 5914 ( )( )( ) 1,122. 1,178. 1,476. n/a 1,277. 1,409. 1,689.72� 71� 11/4� 14� XTCS1 7114 ( )( )( ) 1,181. 1,237. 1,595. n/a 1,342. 1,495. 1,829.
acrylic shown
Center screen to 50� H 48� 48� 11/4� 21� XTCS1 4821 ( )( )( ) 1,003. 1,049. 1,595. 1,476. 1,295. 1,442. 1,761.60� 60� 11/4� 21� XTCS1 6021 ( )( )( ) 1,299. 1,383. 1,772. 1,714. 1,393. 1,571. 1,970.72� 72� 11/4� 21� XTCS1 7221 ( )( )( ) 1,359. 1,441. 1,950. 1,831. 1,443. 1,650. 2,133.
slatwall shown
Center screen to 50� Hadjacent to end screen
48� 47� 11/4� 21� XTCS1 4721 ( )( )( ) 1,003. 1,049. 1,595. 1,476. 1,295. 1,442. 1,761.60� 59� 11/4� 21� XTCS1 5921 ( )( )( ) 1,299. 1,383. 1,772. 1,714. 1,393. 1,571. 1,970.72� 71� 11/4� 21� XTCS1 7121 ( )( )( ) 1,359. 1,441. 1,950. 1,831. 1,443. 1,650. 2,133.
combination shown
Order Code
Example: XTCS16014A O 111
XT Crinion Open TableCS1 Center screen60 Width14 HeightA SurfaceO Opal111 Frame finish
Specifications
Acrylic surface is AO opal or ATtranslucent.
For Marker surface both sidesspecify suffix M.
For Slatwall screens specify slatwalland frame finish.
For combination acrylic/slatwallscreens specify suffixes CO (opal) orCT (translucent), slatwall and framefinish.
Slatwall surface is available in (AA)or any standard painted finishexcept 613 Silver.
For veneer surface specify suffix Vand finish code from list on CrinionOpen Table.
Frame is clear anodized aluminumor any standard paint finish except613 Silver.
Application Notes
Center screens mount to continuouschannel at center of tables. Specify14� H screens for a 42� horizon.Specify 21� H screens for a 49�horizon. Horizons are maintainedregardless of worksurface height.
Combination screens include 14�high slatwall with acrylic above.
Center screens include mountinghardware for standard top channelonly.
Center screens adjacent to endscreens allow space for dual orsingle sided end screens.
Slatwall screens require buttressesto support Knoll Extra flat screenmonitor arm. Specify one buttressper monitor arm, up to fourbuttresses per screen.
Slatwall screens will support flatpanel monitor arms with varyingweight limitations based onmounting and application. Pleaserefer to the KnollExtra price list forcomprehensive mounting andweight limitation information byapplication.
Veneer grain direction is horizontal.
Marker surface has wood core.
Knoll Office Tables
60
Center screensTackable fabric surface
description application w d h pattern no. 10 15 20 30 35 40 45
Center screen to 43� H 48� 48� 11/4� 14� XTCS1 4814F ( )( )( ) $904. $921. $925. $945. $959. $959. $992.60� 60� 11/4� 14� XTCS1 6014F ( )( )( ) 987. 1,009. 1,013. 1,036. 1,055. 1,055. 1,096.72� 72� 11/4� 14� XTCS1 7214F ( )( )( ) 1,011. 1,037. 1,041. 1,071. 1,094. 1,094. 1,142.
Center screen to 43� Hadjacent to end screen
48� 47� 11/4� 14� XTCS1 4714F ( )( )( ) 895. 913. 916. 934. 950. 950. 983.60� 59� 11/4� 14� XTCS1 5914F ( )( )( ) 987. 1,009. 1,013. 1,036. 1,055. 1,055. 1,096.72� 71� 11/4� 14� XTCS1 7114F ( )( )( ) 1,011. 1,037. 1,041. 1,071. 1,094. 1,094. 1,142.
Center screen to 50� H 48� 48� 11/4� 21� XTCS1 4821F ( )( )( ) 958. 976. 979. 997. 1,013. 1,013. 1,044.60� 60� 11/4� 21� XTCS1 6021F ( )( )( ) 1,069. 1,093. 1,096. 1,118. 1,138. 1,138. 1,179.72� 72� 11/4� 21� XTCS1 7221F ( )( )( ) 1,080. 1,107. 1,112. 1,141. 1,164. 1,164. 1,212.
Center screen to 50� Hadjacent to end screen
48� 47� 11/4� 21� XTCS1 4721F ( )( )( ) 958. 976. 979. 997. 1,013. 1,013. 1,044.60� 59� 11/4� 21� XTCS1 5921F ( )( )( ) 1,069. 1,093. 1,096. 1,118. 1,138. 1,138. 1,179.72� 71� 11/4� 21� XTCS1 7121F ( )( )( ) 1,080. 1,107. 1,112. 1,141. 1,164. 1,164. 1,212.
Order Code
Example: XTCS16014F20(W2801) AA
XT Crinion Open TableCS1 Center screen60 Width14 HeightF Surface20 Fabric gradeW2801 FabricAA Frame finish
Specifications
1. Tackable fabric surface is suffixF.
2. Select fabric surface finish codefrom list on page Crinion OpenTable.
Frame is clear anodized aluminumor any standard paint finish except613 Silver.
Fabric is railroaded.
Application Notes
Fabric center screens mount tocontinuous channel at center oftables. Specify 14� H screens for a43� horizon. Specify 21� H screensfor a 50� horizon. Horizons aremaintained regardless ofworksurface height.
Center screens include mountinghardward for standard top channelonly.
Center screens adjacent to endscreens allow space for dual orsingle sided end screens.
Knoll Office Tables
61
Cri
nion
Ope
nTa
ble
Shelves, adapters and buttresses for slatwall screens
description application w d h pattern no. list AA/paint L V1 V2 V3
Display shelf 5�Daluminum only
48� slatwall 45� 5� 1� XT1DS4505 ( ) $262.60� slatwall 57� 5� 1� XT1DS5705 ( ) 294.72� slatwall 69� 5� 1� XT1DS6905 ( ) 318.
Open shelf 9�Dlaminate or veneer only
48� slatwall 45� 9� 1� XT1LS4509 ( )( ) 294. 384. 441. 596.60� slatwall 57� 9� 1� XT1LS5709 ( )( ) 338. 440. 505. 684.72� slatwall 69� 9� 1� XT1LS6909 ( )( ) 383. 497. 571. 771.
Slatwall adapters forapplied wall accessories
24� XT1SA24 ( ) 27.30� XT1SA30 ( ) 32.36� XT1SA36 ( ) 38.42� XT1SA42 ( ) 43.48� XT1SA48 ( ) 48.54� XT1SA54 ( ) 54.60� XT1SA60 ( ) 59.66� XT1SA66 ( ) 65.72� XT1SA72 ( ) 70.
Buttress for slatwall screen XTCS1 SBA ( ) 236.
Order Code
Example: XT1LS5709 118 AA
XT1 Crinion Open TableLS Open shelf57 Width09 Depth118 Shelf finishAA Platform finish
Specifications
Display shelves are anodizedaluminum (AA) or any standardpainted finish except silver.
For open shelves specify anystandard laminate or veneer finish,then platform finish.Shelf platform may be AA or anystandard paint finish except silver.
Slatwall adapters are integral color812 Easy grey or 111 Black only.
Application Notes
Open shelves and display shelvesfor slatwall are designed for use onCrinion Open Table center screenswith slatwall inserts.
Shelves include adapter that snapsinto horizontal channels in slatwall,approximately every 2� vertically.
Shelf width fits either full widthcenter screens or screens adjacentto end screens.
Slatwall adapters enable otherApplied Wall System shelves andaccessories to be mounted toCrinion Open Table slatwall.
Adapter will also fit other Knollsystem slatwalls, such asAutoStrada spine or panels, but useof shelves in these applications maynot comply with ANSI/BIFMAsafety standards foranti-dislodgment.
Knoll Office Tables
62
Side screensAcrylic, Marker or veneer surface
description application w d h pattern no. listOpal
acrylic
Trans.acrylic /Marker V1 V2 V3
Side screen to 43� H 24� D worksurface 22� 11/4� 14� XTSS1 2414 ( )( )( ) $620. $637. $934. $1,002. $1,104.30� D worksurface 28� 11/4� 14� XTSS1 3014 ( )( )( ) 650. 672. 964. 1,041. 1,172.36� D worksurface 34� 11/4� 14� XTSS1 3614 ( )( )( ) 708. 737. 989. 1,077. 1,236.
acrylic shown
Side screen to 50� H 24� D worksurface 22� 11/4� 21� XTSS1 2421 ( )( )( ) 708. 737. 1,000. 1,084. 1,230.30� D worksurface 28� 11/4� 21� XTSS1 3021 ( )( )( ) 739. 772. 1,032. 1,131. 1,316.36� D worksurface 34� 11/4� 21� XTSS1 3621 ( )( )( ) 796. 835. 1,061. 1,176. 1,402.
acrylic shown
Side screen brackets ( pair ) postformed edge XTSM1P ( ) 249.squared edge XTSM1S ( ) 177.tapered edge XTSM1K ( ) 177.
Order Code
Example: XTSS13014A O AA
XT Crinion Open TableSS1 Side screen30 Width14 HeightA SurfaceO OpalAA Frame finish
Specifications
1. Specify surfaceA = AcrylicV = VeneerM = Marker
2. For Acrylic surface specifyO = OpalT = TranslucentVeneer surfaces may be anystandard AutoStrada V1,V2 orV3 veneer.Specify veneer finish code fromCrinion Open Table.
Frame is clear anodized aluminumor any standard paint finish except613 Silver.
Brackets are available in all paintfinishes
Application Notes
Side screens clamp to front andback edge of worksurface at anypoint (except at hinged access door).Specify side screen bracketsseparately. Specify 14� H screensfor a 42� horizon. Specify 21� Hscreens for a 49� horizon. Sidescreens align in height with centerscreens when worksurfaces are setat 283/8� H.
Veneer grain direction is horizontal.
Knoll Office Tables
63
Cri
nion
Ope
nTa
ble
Side screensTackable fabric surface
description application w d h pattern no. list 10 15 20 30 35 40 45
Side screen to 43� H 24� D worksurface 22� 11/4� 14� XTSS1 2414F ( )( )( ) $704. $712. $714. $725. $732. $732. $748.30� D worksurface 28� 11/4� 14� XTSS1 3014F ( )( )( ) 725. 737. 739. 750. 760. 760. 779.36� D worksurface 34� 11/4� 14� XTSS1 3614F ( )( )( ) 746. 760. 776. 786. 786. 786. 812.
Side screen to 50� H 24� D worksurface 22� 11/4� 21� XTSS1 2421F ( )( )( ) 736. 744. 745. 755. 763. 763. 779.30� D worksurface 28� 11/4� 21� XTSS1 3021F ( )( )( ) 767. 777. 779. 791. 801. 801. 821.36� D worksurface 34� 11/4� 21� XTSS1 3621F ( )( )( ) 781. 794. 796. 812. 822. 822. 847.
Side screen brackets ( pair ) postformed edge XTSM1P ( ) 249.squared edge XTSM1S ( ) 177.tapered edge XTSM1K ( ) 177.
Order Code
Example: XTSS13014F20(W2801) 115
XT Crinion Open TableSS1 Side screen30 Width14 HeightF Surface20 Fabric gradeW2801 Fabric115 Frame finish
Specifications
1. Tackable fabric surface is suffixF.
2. Select fabric surface finish codefrom list on page Crinion OpenTable.
3. Specify frame finish.
Frame is clear anodized aluminumor any standard paint finish except613 Silver.
Fabric is railroaded.
Brackets are available in all paintfinishes.
Application Notes
Side screens clamp to front andback edge of worksurface at anypoint (except at hinged access door).Specify side screen bracketsseparately. Specify 14� H screensfor a 43� horizon. Specify 21� Hscreens for a 50� horizon. Sidescreens align in height with centerscreens when worksurfaces are setat 283/8� H.
Knoll Office Tables
64
Return screensAcrylic, Marker or veneer surface
description application w d h pattern no. listOpal
acrylic
Trans.acrylic /Marker V1 V2 V3
Return screen to 43� H 54� 52� 11/4� 14� XTRS1 5414 ( )( )( ) $1,033. $1,089. $1,126. $1,245. $1,485.60� 58� 11/4� 14� XTRS1 6014 ( )( )( ) 1,033. 1,089. 1,141. 1,271. 1,540.66� 64� 11/4� 14� XTRS1 6614 ( )( )( ) 1,033. 1,089. 1,165. 1,303. 1,603.72� 70� 11/4� 14� XTRS1 7214 ( )( )( ) 1,033. 1,089. 1,180. 1,328. 1,656.78� 76� 11/4� 14� XTRS1 7814 ( )( )( ) 1,151. 1,206. 1,397. 1,523. 1,879.
Return screen to 50� H 54� 52� 11/4� 21� XTRS1 5421 ( )( )( ) 1,211. 1,294. 1,235. 1,392. 1,740.60� 58� 11/4� 21� XTRS1 6021 ( )( )( ) 1,211. 1,294. 1,256. 1,430. 1,819.66� 64� 11/4� 21� XTRS1 6621 ( )( )( ) 1,211. 1,294. 1,277. 1,465. 1,895.72� 70� 11/4� 21� XTRS1 7221 ( )( )( ) 1,211. 1,294. 1,298. 1,501. 1,971.78� 76� 11/4� 21� XTRS1 7821 ( )( )( ) 1,359. 1,441. 1,521. 1,706. 2,215.
Side screen brackets ( pair ) postformed edge XTSM1P ( ) 249.squared edge XTSM1S ( ) 177.
Order Code
Example: XTRS16014A O 118
XT Crinion Open TableRS1 Return screen60 Width14 HeightA AcrylicO Opal118 Frame finish
Specifications
1. Specify surfaceA = AcrylicV = VeneerM = Marker
2. For Acrylic surface specifyO = OpalT = TranslucentVeneer surfaces may be anystandard AutoStrada V1,V2 orV3 veneer.Specify veneer finish code fromCrinion Open Table.
3. Specify frame finish.
Frame is clear anodized aluminum(AA) or any standard paint finishexcept 613 Silver.
Brackets are available in all paintfinishes.
Application Notes
Return screens span the depth ofCrinion Open Table worksurfacesand the width of a 30�, 36� or 42�worksurface planned asperpendicular return. Specify 14� Hscreens for 42� horizon. Specify 21�H screens for a 49� horizon. Returns( file tops or AutoStradaworksurfaces) must be at the sameheight as worksurface.
Specify side brackets separately.
Veneer grain direction is horizontal.
Knoll Office Tables
65
Cri
nion
Ope
nTa
ble
Return screensTackable fabric surface
description application w d h pattern no. list 10 15 20 30 35 40 45
Return screen to 43� H 54� 52� 11/4� 14� XTRS1 5414F ( )( )( ) $859. $880. $885. $905. $921. $921. $959.60� 58� 11/4� 14� XTRS1 6014F ( )( )( ) 866. 888. 892. 916. 934. 934. 976.66� 64� 11/4� 14� XTRS1 6614F ( )( )( ) 884. 907. 912. 939. 958. 958. 1,002.72� 70� 11/4� 14� XTRS1 7214F ( )( )( ) 889. 915. 920. 951. 970. 970. 1,021.78� 76� 11/4� 14� XTRS1 7814F ( )( )( ) 1,023. 1,051. 1,057. 1,088. 1,110. 1,110. 1,164.
Return screen to 50� H 54� 52� 11/4� 21� XTRS1 5421F ( )( )( ) 841. 859. 863. 887. 903. 903. 940.60� 58� 11/4� 21� XTRS1 6021F ( )( )( ) 872. 894. 897. 923. 941. 941. 981.66� 64� 11/4� 21� XTRS1 6621F ( )( )( ) 878. 902. 906. 932. 953. 953. 997.72� 70� 11/4� 21� XTRS1 7221F ( )( )( ) 884. 909. 915. 944. 966. 966. 1,015.78� 76� 11/4� 21� XTRS1 7821F ( )( )( ) 1,042. 1,071. 1,077. 1,108. 1,132. 1,132. 1,184.
Side screen brackets ( pair ) postformed edge XTSM1P ( ) 249.squared edge XTSM1S ( ) 177.
Order Code
Example: XTRS16014F20(W2801) 611
XT Crinion Open TableRS1 Return screen60 Width14 HeightF Surface20 Fabric gradeW2801 Fabric611 Frame finish
Specifications
1. Tackable fabric surface is suffixF.
2. Select fabric surface finish codefrom list on page Crinion OpenTable.
3. Specify frame finish.
Frame is clear anodized aluminumor any standard paint finish except613 Silver.
Fabric is railroaded.
Brackets are available in all paintfinishes.
Application Notes
Fabric return screens span thedepth of Crinion Open Tableworksurfaces and the width of a 30�,36� or 42� worksurface planned asperpendicular return. Specify 14� Hscreens for 43� horizon. Specify 21�H screens for a 50� horizon. Retunsmust be at the same height asworksurface.
Specify mounting bracketsseparately.
Knoll Office Tables
66
Dual end screensAcrylic, Marker or veneer surface
description application w d h pattern no. listOpal
acrylic
Trans.acrylic /Marker V1 V2 V3
Dual end screens to 43� H 24� D dual 48� 11/4� 14� XTES1 4814 ( )( )( ) $769. $795. $1,080. $1,192. $1,415.30� D dual 60� 11/4� 14� XTES1 6014 ( )( )( ) 1,003. 1,060. 1,177. 1,311. 1,589.36� D dual 72� 11/4� 14� XTES1 7214 ( )( )( ) 1,033. 1,089. 1,242. 1,394. 1,728.
acrylic shown
Dual end screens to 50� H 24� D dual 48� 11/4� 21� XTES1 4821 ( )( )( ) 915. 959. 1,193. 1,342. 1,662.30� D dual 60� 11/4� 21� XTES1 6021 ( )( )( ) 1,181. 1,263. 1,293. 1,470. 1,870.36� D dual 72� 11/4� 21� XTES1 7221 ( )( )( ) 1,211. 1,403. 1,344. 1,549. 2,032.
acrylic shown
Replacement mast Kit acrylic center screen XTSM1C ( ) 100.slatwall center screen XTSM1SLAT ( ) 265.
End screen brackets ( pair ) tapered edgeworksurface
XTSM1KK ( ) 177.
Side screen brackets ( pair ) postformed edge XTSM1P ( ) 249.squared edge XTSM1S ( ) 177.
Order Code
Example: XTES16014A O AA
XT Crinion Open TableES1 End screen60 Width14 HeightA SurfaceO OpalAA Frame finish
Specifications
1. Specify surfaceA = AcrylicV = VeneerM = Marker
2. For Acrylic surface specifyO = OpalT = TranslucentVeneer surfaces may be anystandard AutoStrada V1,V2 orV3 veneer.Specify veneer finish code fromCrinion Open Table.
3. Specify frame finish.
Frame is clear anodized aluminumor any standard paint finish except613 Silver.
Brackets are available in all paintfinishes.
Replacement mast kit for acryliccenter screen is 812 Easy Grey or111 Black.
Application Notes
Dual end screens clamp tofront edge of worksurface on eitherside of table. Specify 14� H screensfor a 42� horizon. Specify 21� Hscreens for a 49� horizon. Sidescreens align with center screenswhen worksurfaces are set at 283/8�H.
Specify end screen bracketsseparately for each sceen.
Veneer grain direction is horizontal.
Knoll Office Tables
67
Cri
nion
Ope
nTa
ble
Dual end screensTackable fabric surface
description application w d h pattern no. list 10 15 20 30 35 40 45
Dual end screens to 43� H 24� D dual 48� 11/4� 14� XTES1 4814F ( )( )( ) $791. $811. $814. $833. $848. $848. $882.30� D dual 60� 11/4� 14� XTES1 6014F ( )( )( ) 866. 888. 892. 916. 934. 934. 976.36� D dual 72� 11/4� 14� XTES1 7214F ( )( )( ) 889. 915. 920. 950. 970. 970. 1,021.
Dual end screens to 50� H 24� D dual 48� 11/4� 21� XTES1 4821F ( )( )( ) 855. 873. 878. 896. 912. 912. 945.30� D dual 60� 11/4� 21� XTES1 6021F ( )( )( ) 929. 952. 956. 980. 998. 998. 1,039.36� D dual 72� 11/4� 21� XTES1 7221F ( )( )( ) 942. 968. 972. 1,001. 1,024. 1,024. 1,071.
Replacement mast Kit acrylic center screen XTSM1C ( ) 100.slatwall center screen XTSM1SLAT ( ) 265.
End screen brackets ( pair ) tapered edgeworksurface
XTSM1KK ( ) 177.
Side screen brackets ( pair ) postformed edge XTSM1P ( ) 249.squared edge XTSM1S ( ) 177.
Order Code
Example: XTES16014F20(W2801) 112
XT Crinion Open TableES1 End screen60 Width14 HeightF Surface20 Fabric gradeW2801 Fabric112 Frame finish
Specifications
1. Tackable fabric surface is suffixF.
2. Select fabric surface finish codefrom list on page Crinion OpenTable.
3. Specify frame finish.
Frame is clear anodized aluminumor any standard paint finish except613 Silver.
Fabric is railroaded.
Brackets are available in all paintfinishes.
Replacement mast kit is 812 EasyGrey or 111 Black.
Application Notes
Dual end screens clamp tofront edge of worksurface on eitherside of table. Specify 14� H screensfor a 43� horizon. Specify 21� Hscreens for a 50� horizon. Sidescreens align with center screenswhen worksurfaces are set at 283/8�H.
Specify end screen bracketsseparately for each sceen.
Knoll Office Tables
68
Single sided end screenAcrylic, Marker or veneer surface
description application w d h pattern no. listOpal
acrylic
Trans.acrylic /Marker V1 V2 V3
Single sided end screens to 43� H 24� D Single sided 241/2� 11/4� 14� XTES1 2414 ( )( )( ) $620. $637. $934. $1,002. $1,104.30� D Single sided 301/2� 11/4� 14� XTES1 3014 ( )( )( ) 650. 672. 964. 1,041. 1,172.36� D Single sided 361/2� 11/4� 14� XTES1 3614 ( )( )( ) 708. 737. 989. 1,077. 1,236.
acrylic shown
Single sided end sceen to 50� H 24� D single sided 241/2� 11/4� 21� XTES1 2421 ( )( )( ) 708. 737. 1,000. 1,084. 1,230.30� D single sided 301/2� 11/4� 21� XTES1 3021 ( )( )( ) 739. 772. 1,032. 1,131. 1,316.36� D single sided 361/2� 11/4� 21� XTES1 3621 ( )( )( ) 796. 835. 1,061. 1,176. 1,402.
acrylic shown
Single sided end screenbrackets ( set )
postformed edge XTSM1PC ( ) 178.square edge XTSM1SC ( ) 131.tapered edge XTSM1KC ( ) 131.
Order Code
Example: XTES13614A O 114
XT Crinion Open TableES1 End screen36 Width14 HeightA SurfaceO Opal114 Frame finish
Specifications
1. Specify surfaceA = AcrylicV = VeneerM = Marker
2. For Acrylic surface specifyO = OpalT = TranslucentVeneer surfaces may be anystandard AutoStrada V1,V2 orV3 veneer.Specify veneer finish code fromCrinion Open Table.
3. Specify frame finish.
Frame is clear anodized aluminumor any standard paint finish except613 Silver.
Brackets are available in all paintfinishes.
Application Notes
Single sided end screens clamp tofront edge of worksurface and attachto top of channel. Specify 14� Hscreens for a 42� horizon. Specify21� H screens for a 49� horizon.Side screens align with centerscreens when worksurfaces are setat 283/8� H.
Specify end screen bracketsseparately for each sceen.
Veneer grain direction is horizontal.
Knoll Office Tables
69
Cri
nion
Ope
nTa
ble
Single sided end screenTackable fabric surface
description application w d h pattern no. list 10 15 20 30 35 40 45
Single sided end screens to 43� H 24� D Single sided 241/2� 11/4� 14� XTES1 2414F ( )( )( ) $704. $712. $714. $725. $732. $732. $748.30� D Single sided 301/2� 11/4� 14� XTES1 3014F ( )( )( ) 725. 737. 739. 750. 760. 760. 779.36� D Single sided 361/2� 11/4� 14� XTES1 3614F ( )( )( ) 746. 760. 776. 786. 786. 786. 812.
Single sided end sceen to 50� H 24� D single sided 241/2� 11/4� 21� XTES1 2421F ( )( )( ) 736. 744. 745. 755. 763. 763. 779.30� D single sided 301/2� 11/4� 21� XTES1 3021F ( )( )( ) 767. 777. 779. 791. 801. 801. 821.36� D single sided 361/2� 11/4� 21� XTES1 3621F ( )( )( ) 781. 794. 796. 812. 822. 822. 847.
Single sided end screenbrackets ( set )
postformed edge XTSM1PC ( ) 178.square edge XTSM1SC ( ) 131.tapered edge XTSM1KC ( ) 131.
Order Code
Example: XTES13614F20(W2801) 111
XT Crinion Open TableES1 End screen36 Width14 HeightF Surface20 Fabric gradeW2801 Fabric111 Frame finish
Specifications
1. Tackable fabric surface is suffixF.
2. Select fabric surface finish codefrom list on page Crinion OpenTable.
3. Specify frame finish.
Frame is clear anodized aluminumor any paint finish except 613Silver.
Fabric is railroaded.
Brackets are available in all paintfinishes.
Application Notes
Single sided end screens clamp tofront edge of worksurface and attachto top of channel. Specify 14� Hscreens for a 43� horizon. Specify21� H screens for a 50� horizon.Side screens align with centerscreens when worksurfaces are setat 283/8� H.
Specify end screen bracketsseparately for each sceen.
Knoll Office Tables
70
Frameless glass Add upfor Crinion Open Table
description w d h pattern numberclear
tempered powder
Frameless glass Add ups 48� 1/2� 12� XAUA 1248G ( )( ) $527. $547.60� 1/2� 12� XAUA 1260G ( )( ) 644. 670.72� 1/2� 12� XAUA 1272G ( )( ) 761. 790.
Order Code
Example: XAUA 1248G TEMP AA
X Crinion Open TableAUA Frameless addup screen48 Width12 HeightG GlassTEMP FinishAA Base finish
Specifications
Add up type:G Glass
Glass add-ups are available with thefollowing glass options:TEMP Clear temperedGL13 Powder
Specify base finish:AA anodized aluminum and allstandard painted finishes except613 Silver.
Application Notes
Frameless glass addups for CrinionOpen Table match those availablefor the AutoStrada spine.
Tempered glass in clear or poweredfinish is1/2� thick. Base frame issecured with bolts to top channel forframeless glass addups.
Frameless addups cannot bemounted to standard top channelincluded with base assemblies.
Base extrusion is clear anodizedaluminum or any standard paintedfinish except Silver.
Knoll Office Tables
71
Cri
nion
Ope
nTa
ble
Morrison Network privacy screensmounting kit for Crinion Open Table
description w d h pattern number list price
Fabric screen mounting kit XTPS1MZKIT $120.
Order Code
Example: XTPS1MZKIT
XT Crinion Open TablePS1 Privacy ScreenMZ FabricKIT Kit
Specifications Applications notes
Crinion Open Tables are designed toaccept Morrison Network privacyscreens with fabric screen mountingkit. Screens are tackable fabric, 3/4�thick, in widths corresponding toCrinion worksurfaces 48�, 60� or72� wide. Specify screensMZ1-B4815F, MZ1B6015F orMZ1B7215F.
Specify one mounting kit for eachscreen. Fabric screen mounting kitsinclude two uprights that fasten tothe top channel at any point.Uprights slide into internalchannels in screens. Fabric screensdo not align in height with acrylicprivacy screens.
Knoll Office Tables
72
General Specifications
Panels and PartsAll panels have a concealedperimeter frame 11/2� x 2�. Panels 42�wide and wider, other than windowpanels, have additional interiorbracing.
Panel bases are 33/8� or 63/16� highwith levellers at both ends. Snap-inpanel side plates are provided with atleast two lift-outs on each side ofpanels 30� to 48� wide; one lift-outon each side of panels 24� wide,unless no knockout option isrequested (see Planning Guide fordetails). Acoustical panels can bespecified with fabric on either side orfabric on one side and wood orlaminate on the other. A laminatedboard septum is covered on bothsides with acoustical fiberglass forfabric/fabric panels providing anNRC of .80 and STC of 22.
Window panels utilize tempered4mm thick glass. Panel-to panelconnection is accomplished with asteel connector bar, which engageslocking points on panel perimeterframes and is drawn tight by meansof a screw mechanism located at thetop of the bar. Each panel is suppliedwith one connector, which also servesas an anchor point for panel-hungsupport brackets. Panel-to-wallconnection is accomplished with aPVC extrusion which connects twoaluminum extrusions - one screwedto the wall, the other attached to thepanel perimeter frame. Stackingpanels are provided with a fastenerfeature which allows individual 15�and 30�H sections to be added orremoved without disturbing the panelrun. In all cases a leveller adjustablepanel must first be specified withadditional sections added on toprovide height adjustment. A post isrequired at panel intersections, whena panel run changes direction or asin the case of the straight line postwhen it is required to make up anextra 21/2� to match another panelrun. Top trim utilizes a PVCextrusion for a press fit into the panelperimeter frame. End trim is screwedto a steel connector bar which locksit to the panel perimeter frame.
All tiled panels are constructedusing the same frame as monolithicpanels and also use the same internalcomponents. However, the insertstructure has been altered to allowtiles 15�H to be independentlyapplied to the panel, thus creating atiled appearance. Tiled panels canbe stacked on.
Reff panels can be joined to existingSystem 6, Classic System 6, andSegmented panels with a conversionkit.
Beltway electrical panel is a Reffpanel altered to provide access toelectrical and communication portsat a desk height level.
Note:Line drawings in this price list arepurely for quick productidentification without any form ofdetail. One must not use the pricelist line drawings to satisfyproduction dimensions, shape orsupport options. Refer to PlanningGuide for detailed productinformation.
Wood and Laminate ComponentsTops are 13/4� or 11/4� thick.Undersides are pre-drilled withinserts and routed to acceptpedestals and connecting hardware.
Flush and cantilever top assemblieshave 11/16� thick endpanels, and 15/16�thick backpanels. Recessed topassemblies have 11/16� thickendpanels and a 15/16� thickbackpanel.
Pedestals are supplied with metalchannels on the top to attach thepedestal to the underside of aworksurface.
Drawer boxes can be specified inboth metal or wood with dovetailedjoinery. Hinge doors use concealed,adjustable hinges.
All components are veneered andfinished on all sides unless otherwisespecified. Edges are banded with 1/8�PVC or 3/32� solid wood. 13/4�laminate tops are postformed frontand back. 2� Deep solid waterfalledge optional.
LocksAll pedestals and cabinets withdrawers are supplied with a ganglockmechanism in place. In addition,cabinets with drawers have a drawerinterlock anti-tip device designed toprevent the opening of a seconddrawer when one is already open.Drawer fronts and door fronts arerouted to receive the lock itself.Locks for drawers in pedestals andcabinets can be retro-fitted. Doorlocks are identical in shape to drawerlocks, but these components are notpre-routed and therefore, lockscannot be retro-fitted.
Reff lockcores must be specifiedseparately. Reff lock mechanisms areblack and feature a removable corefor easy replacement.
LevellersAll endpanels, backpanels (exceptrecessed), floor pedestals andcabinets have 11/2� high levellers.
LightingShelves and overhead cabinets havea bottom recess to house the tasklight. The task light can be easilyretro-fitted.
Power is conveyed to the task lightfixture by a 9� long cable. The lowerend of the cable can be plugged intoa panel base receptacle.
GrommetsGrommets are optional (except wherenoted). Tops up to 48� wide have onegrommet. Tops wider than 48�include two grommets. See PlanningGuide for locations.
All dimensions in this price list arefor representative purposes only.For accurate build dimensions orfactory drawings, please callCustomer Services.
The Reff electrical is listed for use inthe Reff panel system underUL1286.
Reff ‘‘Floor to Ceiling’’ is a modular,panel-based system. The ceilingchannel should not be used as asupport for the panel (see supportsection of specification guide).
Because local building andelectrical codes vary and may havespecial requirements for modularwalls that touch, approach or areattached to the ceiling, customersand installers should have thespecifications reviewed andapproved by building inspectorsand a qualified electricalcontractor. To the extent localcodes and practices dictate, Knollis available to help withcustomized solutions.
Orders with 50 or fewer locksrequired with no specific keyingrequests will be sent randomly keyedby the factory without warning.
FinishingAll Reff natural wood veneer andTechwood components are stainedand sealed using a state of the artpolyurethane finishing process.Polyur� provides superior resistanceto solvents, stains, abrasion and heat.Each component is coated and curedwith ultraviolet light for a durable,lasting wood surface.
Natural veneers are all hand selectedto best showcase the beauty ofnatural grain and to Knoll’smeticulous color and grainstandards.
Every effort is made to ensure thatKnoll Reff veneers are the best thatcan be sourced in quality of color,consistency and size. Naturalvariations of wood are held in highregard and are not considered to bedefects. Natural variations are notsubject to warranty. The naturalprocess of color change in real woodproducts is part of the uniquecharacter and beauty of this material.Knoll expects wood to patina overtime and does not warranty colorchange.
Techwood is a genuine real woodproduct, enhanced by technology toprovide color and grain consistency.Techwood finishes are available inopen and closed pore options. Openpore techwood finishes are notavailable on waterfall edge tops.Waterfall edge tops can be specifiedwith closed pore V1 and V2 finishesonly.
FSC (Forest Stewardship Council)certified materials available uponrequest.
Knoll Office Tables
73
Ref
fP
rofil
es
Reff Profiles finish options
Wood Finishes:V1 Techwood Closed Pore
Y316 MapleY319 CherryY323 Medium WalnutY326 Dark MahoganyY327 Light OakY329 Medium OakY341 Wenge *Y342 Medium Teak *Y343 Dark Grey Oak *Y344 EspressoY851 Black OakY811 NaturalY821 Blond MapleY831 Light Cherry*Not available on Reff optionalEdges and Waterfall Edge.
V1 - Techwood Closed PoreSurface with matching synthethicedge:Options applicable for 11/4� thickworksurfaces with standard flat edgeonly.
S319 CherryS316 MapleS323 Medium Walnut
V2 Natural Veneers/PremiumTechwod VeneersClosed Pore
V312 Bronze CherryV316 MapleV411 Light WalnutV415 Peacock Green WalnutV417 Old English WalnutV418 Smoked WalnutV433 Light Fawn CherryV436 Medium Brown CherryV440 Natural Hemlock (QC)Y871 Iced Sycamore (Open
pore)Y841 Ebony (Open pore)Y861 Grigio (Open pore)(all above V2’s are flat cut)V421 Chalk OakV423 Light OakV425 Amber OakV427 Brown Oak(all V2 Oak’s are rift cut)V439 Straight Anigre
V2 Natural Veneer with syntheticedgeOptions applicable for 11/4� thickworksurfaces with standard flat edgeonly.
Flat Cut:
R319 Medium CherryR315 Light CherryR316 Light MapleR323 Medium WalnutR415 Peacock Green WalnutR417 Old English WalnutR421 Chalk OakR427 Brown OakR312 Bronze Cherry
V3 Exotic VeneerV512 Figured AnigreV514 MakoreV515 Figured SycamoreV517 Natural SapeleV518 Natural Chestnut(all above are quarter cut)
Glass Options:
TEMP Clear Tempered (G1)
Architectural Glass Options: (G2)
GL13 PowderGL8 WaferGL6 Block Matrix
Back Painted Glass (G3)
GL11 Back Painted BlackGL15 Back Painted Medium
GreyGL18 Back Painted White
Colored Glass (G3)
GL35 GreyGL85 Star Clear
LocksBlack and Silver
LaminateMatching edge band unless notedotherwise
111 Jet Black114 Folkstone Grey115 Medium Grey117 Soft Grey118 Bright White119 Pumice121 Micro Grey with 114
Folkstone grey edge band122 Brushed Sand with 119
Pumice edge band123 Brushed Grey with 128
Fog edge band124 Medium Chery125 Natural Maple126 Natural Cherry127 Walnut128 Fog129 Micro Sand with 119
Pumice edge band
Paint Classifications:Upcharge as applicable for paintclass noted on applicable productpages
P1
111 Jet Black112 Brown113 Dark Grey114 Folkstone Grey115 Medium Grey116 Sandstone117 Soft Grey
P2
611 Beige Mist Metallic612 Medium Metallic Grey
P3
118 Bright White613 SilverPD Polish ChromePT Brushed PewterPN Black NickelPU Satin NickelAN Anodized BlackAP Anodized PolishedAU Anodized SatinAA Anodized Aluminum
See matrix next page for finishesapplicable by component
Forbo
851 Biscuit852 Sky Blue853 Stone854 Cinnamon855 Heather Blue
Mixed Finishes: (where applicablefor work surfaces only)To order mixed finishes, enter fourdigit finish code as follows:
Use 2 digit prefix to indicate surfacefinish (laminate)
11 Jet Black14 Folkstone Grey17 Soft Grey18 Bright White19 Pumice21 Micro Grey22 Brushed Sand23 Brushed Grey28 Fog29 Micro Sand
Use 2 digit suffix to indicate edgefinish (wood)
12 for V31216 for V316, Y316Y9 for Y319Y3 for Y32326 for Y32627 for Y32729 for Y32943 for V43345 for V41546 for V43647 for V41748 for V41849 for V43952 for V51254 for V51455 for V51557 for V51761 for V41171 for V42173 for V42375 for V42577 for V42785 for Y851Y1 for Y34162 for Y34244 for Y344
Example:For a Micro Grey laminate surfacewith Bronzed Cherry edge, enterfinish code 2112
For a Jet Black laminate surfacewith Light Maple edge, enter finishcode 1116
Knoll Office Tables
74
Reff Profiles finish options page2
Fabric Options
Grade 10Bailey II (W359) øBroadcloth (W288)Foundation (W351)Growth Spurt (W692)Newbury (W812) øSolid Crepe (W257) øSymbolic Detail (W693)Tailor Made (W133)Versatility (W432)
Grade 15Regency (W210)
Grade 20Banyan (W443)Bauhaus Block (W296A)Circle Line (W1146)Clarity (W281)Criss Cross (W305)Devon (W809) øLabyrinth (W352)Melbourne (W228)Outback (W229)Reflect (W884) øResolution (W280)Walkabout (W230)Weave Three (W298)
Grade 30Basket Draft (W249)Flow (W565)Harmony (W232)Interknit (W1090)Match Point (W1145)Micro (W465)*Progression (W403)Raku Cloth (W566) øRelay (W1020) �
Grade 40Clarkson (W1218)Ornament (W1078)Palladium (W1030)Sennit (W337)Spinoff Nuance (W319)
Grade 45Casual Elegance (W920)Dristi (K872)* ø
*with backing only
� Monolithic panels and tackboardsonly
ø May not be available in all colors.
The following textiles are approved foruse on Reff panels. Consult Knollrepresentative for pricing:
Grade 50Knoll Hopsack (K1206)Ricochet (W498)
Grade 55Knoll Felt (K1207)Transition (W816)
Customers Own MaterialPrices for panels that are to bemanufactured with a customersupplied fabric will follow Grade 10panel pricing.
COM fabrics are subject to a testingcharge prior to acceptance for use onReff panels. Panels bearing COMfabrics are subject to extendedleadtimes. It is the responsibility ofthe customer’s purchasing agent toensure COM fabric is supplied fortesting and manufacturing. Delays inreceiving COM fabric formanufacturing will result inrescheduled delivery dates.
When specifying panel/fabrics usethe following format to denotelocation on a tiled panel.Side 1 Side 21E Top of Panel 2E1D 2D1C 2C1B 2B1A Bottom of Panel 2A
(Side 1 is always the inside of theworkstation.)
Panels with beltway one side:assume the beltway is on SIDE 1 ofthe panel.
Non-Wood FinishesPanel Tiles,
26 1/2� h planning Worksurfaces & Panel Top Trims Panel Base Panel Beltway Leg and InteractionFinishes Components Window Frames Side Plates Side Plates* Bases Style Legs Pulls GrommetsJet Black 111 111 111 111 111 111 111 111Dark grey n/a 113 113 113 113 113 n/a 113Medium grey n/a 115 115 115 115 115 n/a 115Soft grey 117 117 117 117 117 117 n/a 117Folkstone grey 114 114 114 114 114 114 n/a 114Pumice 119 119 119 119 119 119 n/a 119Sandstone n/a 116 116 116 116 116 n/a 116Brown n/a 112 112 112 112 112 112 112Medium metallic grey n/a 612 612 612 612 612 612 612Silver n/a 613 613 613 613 613 613 613Bright White 118 118 118 118 118 118 118 118Beige metallic mist n/a 611 611 611 611 611 611 611Micro Grey * 121 n/a n/a n/a n/a n/a n/a n/aBrushed Sand * 122 n/a n/a n/a n/a n/a n/a n/aBrushed Grey * 123 n/a n/a n/a n/a n/a n/a n/aFog 128 n/a n/a n/a n/a n/a n/a n/aMicro Sand * 129 n/a n/a n/a n/a n/a n/a n/aPlated FinishesSatin brass n/a n/a PZ n/a PZ n/a PZ PZBrushed pewter n/a n/a PT n/a PT n/a PT PTPolished chrome n/a n/a PD n/a PD n/a n/a PDn/a = not available* = matching edge band not available, also not optional for panel tiles or components, worksurfaces only
Knoll Office Tables
75
Ref
fP
rofil
es
Reff Profiles Master Features
Panel Trim Profiles
Flat (Option A)
Square (Option B)
Bullnose (Option C)
Extruded Aluminum (Option E)
Worksurface Profiles
11/2� and 11/4 Thick Standard
11/4� Thick Waterfall
11/4� Thick Cascade
NOTE: See page 0 for 7 Optional Edges which are also available.
Knoll Office Tables
76
Optional edge details
Reff Profiles System incorporatesoptional worksurface edge details.Wood edges are crafted from selecthardwoods and are finished withKnoll’s industry leadingpolyurethane Reff Profiles Finish.Optional for worksurface tops listedon pages 0 through 0.
It is not necessary to plan separatelyfor edges that �mate�; this feature isengineered into appropriate productswhen used as intended.
Edge detail to be specified by oneof the following codes:A - AlphaB - BetaC - ChiD - DeltaE - EpsilonF - PhiG - Gamma
Knoll Office Tables
77
Ref
fP
rofil
es
Conference 11/4�Square and rectangular
description w d pattern no. L M/V1 V2 V3
Rectangular top 1 piece 72� 30� RRA7230-( ) $580. $631. $725. $979.72� 36� RRA7236-( ) 630. 686. 788. 1,064.84� 30� RRA8430-( ) 642. 696. 802. 1,083.84� 36� RRA8436-( ) 690. 749. 860. 1,162.84� 42� RRA8442-( ) 1,019. 1,109. 1,272. 1,717.96� 30� RRA9630-( ) 720. 784. 900. 1,215.96� 36� RRA9636-( ) 794. 863. 994. 1,342.96� 42� RRA9642-( ) 1,170. 1,270. 1,461. 1,973.96� 48� RRA9648-( ) 1,244. 1,353. 1,555. 2,100.
Rectangular top 2 piece 120� 36� RRA12036-( ) 1,275. 1,385. 1,594. 2,152.120� 42� RRA12042-( ) 1,758. 1,912. 2,199. 2,969.120� 48� RRA12048-( ) 1,911. 2,079. 2,389. 3,226.144� 42� RRA14442-( ) 1,976. 2,148. 2,470. 3,334.144� 48� RRA14448-( ) 2,116. 2,303. 2,648. 3,574.
Rectangular top 3 piece 168� 42� RRA16842-( ) 2,589. 2,815. 3,240. 4,374.168� 48� RRA16848-( ) 2,814. 3,059. 3,518. 4,748.192� 42� RRA19242-( ) 2,808. 3,052. 3,508. 4,736.192� 48� RRA19248-( ) 3,023. 3,284. 3,775. 5,095.
Square tops * 60� RRA6060-( ) 1,188. 1,290. 1,487. 2,006.* 72� RRA7272-( ) 1,400. 1,523. 1,751. 2,365.– 36� RRA3636-( ) 447. 487. 561. 758.– 42� RRA4242-( ) 580. 631. 725. 979.– 48� RRA4848-( ) 763. 827. 952. 1,284.
Order Code
Example: RRAG72302
R ReffR RectangularA 11/4� thick72 72� wide30 30� deep2 V2 finishV319 Medium cherry
Specification Information
To order please specify patternnumber including:1. Top thickness2. Width3. Depth4. Finish type5. Finish
1. Thickness options:A = 11/4�
4. Finish type:L = LaminateM = Wood/laminate mixed1 = V12 = V23 = V3
*Square tops in two pieces.
Application Notes
Product on this page will acceptwoodgrain laminate where laminateis currently an option.List price for woodgrain laminateoptions will be current publishedlaminate list price plus 10%.
All tops on this page are withoutgrommets or drillings. The intendeduse of these products is to provideconference room table options.
Top to top brackets included.
Tops have no radius on edges thatadjoin.
See table base matrix in PlanningGuide, pages 140 and 141.
13/4� tops require support at midpoint to reduce spans to 66� or less.
Mixed finish 13/4� tops are notpost-formed.
Actual widths of worksurfaceare1/16� less than nominaldimension. Actual depth is1/8� lessthan nominal dimension.
Applicable finishes are listed onReff Profiles and Reff Profiles.
Worksurface stiffeners arerecommended to provide additionalsupport for open spans greater than48�w.
Knoll Office Tables
78
Conference 11/4�Round and racetrack
description w d pattern no. L, Option A M/V! V2 V3
Racetrack top 1 piece 72� 30� RTA7230-( ) $1,098. $1,193. $1,369. $1,850.84� 30� RTA8430-( ) 1,221. 1,328. 1,527. 2,060.96� 30� RTA9630-( ) 1,357. 1,478. 1,700. 2,294.72� 36� RTA7236-( ) 1,252. 1,360. 1,563. 2,110.84� 36� RTA8436-( ) 1,406. 1,530. 1,758. 2,372.96� 36� RTA9636-( ) 1,560. 1,696. 1,952. 2,634.84� 42� RTA8442-( ) 1,710. 1,861. 2,140. 2,889.96� 42� RTA9642-( ) 1,917. 2,084. 2,395. 3,234.96� 48� RTA9648-( ) 2,103. 2,283. 2,626. 3,544.
Racetrack top 2 piece 120� 36� RTA12036-( ) 2,014. 2,191. 2,521. 3,402.120� 42� RTA12042-( ) 2,175. 2,361. 2,718. 3,669.144� 42� RTA14442-( ) 2,398. 2,605. 2,996. 4,043.120� 48� RTA12048-( ) 2,311. 2,512. 2,889. 3,900.144� 48� RTA14448-( ) 2,457. 2,673. 3,071. 4,145.
Racetrack top 3 piece 168� 42� RTA16842-( ) 3,006. 3,266. 3,757. 5,072.192� 42� RTA19242-( ) 3,228. 3,509. 4,038. 5,451.168� 48� RTA16848-( ) 3,217. 3,494. 4,017. 5,425.192� 48� RTA19248-( ) 3,361. 3,655. 4,201. 5,672.
Round tops – 36� RTA3636-( ) 617. 671. 770. 1,040.– 42� RTA4242-( ) 717. 776. 893. 1,205.– 48� RTA4848-( ) 1,180. 1,281. 1,472. 1,987.* 60� RTA6060-( ) 1,847. 2,008. 2,309. 3,117.* 72� RTA7272-( ) 2,284. 2,483. 2,859. 3,860.
Order Code
Example: RTA72302
R ReffR RoundA 11/4� thick72 72� wide30 30� deep2 V2 finishV319 Medium cherry
Specification Information
To order please specify patternnumber including:1. Top thickness2. Width3. Depth4. Finish type5. Finish
1. Thickness options:A = 11/4�
4. Finish type:L = LaminateM = Wood/laminate mixed1 = V12 = V23 = V3
*Round tops in two pieces.
Application Notes
Product on this page will acceptwoodgrain laminate where laminateis currently an option.List price for woodgrain laminateoptions will be current publishedlaminate list price plus 10%.
Top to top brackets included.
See table base matrix in PlanningGuide pages 140 and 141.
Tops have no radius on edges thatadjoin.
All tops on this page are withoutgrommets or drillings. The intendeduse of these products is to provideconference room table options.
Actual widths of worksurfaceare1/16� less than nominaldimension. Actual depth is1/8� lessthan nominal dimension.
Applicable finishes are listed onReff Profiles and Reff Profiles.
Worksurfacestiffeners are recommended toprovide additional support for openspans greater than 48�w.
Knoll Office Tables
79
Ref
fP
rofil
es
Optional edge 11/4�round and racetrack conference tops
description w d pattern no. V1 V2 V3
Racetrack top - 1 piece 72� 30� RTA(A/B/C/D/E/F/G)7230-(1/2/3) $1,370. $1,576. $2,127.72� 36� RTA(A/B/C/D/E/F/G)7236-(1/2/3) 1,564. 1,795. 2,424.84� 30� RTA(A/B/C/D/E/F/G)8430-(1/2/3) 1,525. 1,757. 2,371.84� 36� RTA(A/B/C/D/E/F/G)8436-(1/2/3) 1,760. 2,018. 2,727.84� 42� RTA(A/B/C/D/E/F/G)8442-(1/2/3) 2,140. 2,461. 3,322.96� 30� RTA(A/B/C/D/E/F/G)9630-(1/2/3) 1,700. 1,955. 2,638.96� 36� RTA(A/B/C/D/E/F/G)9636-(1/2/3) 1,953. 2,243. 3,028.96� 42� RTA(A/B/C/D/E/F/G)9642-(1/2/3) 2,395. 2,754. 3,718.
Racetrack top - 2 piece Profile edge on all sidesexcept on parting lines
120� 36� RTA(A/B/C/D/E/F/G)12036-(1/2/3) 2,521. 2,898. 3,912.120� 42� RTA(A/B/C/D/E/F/G)12042-(1/2/3) 2,718. 3,124. 4,218.120� 48� RTA(A/B/C/D/E/F/G)12048-(1/2/3) 2,889. 3,321. 4,483.144� 42� RTA(A/B/C/D/E/F/G)14442-(1/2/3) 2,995. 3,446. 4,650.144� 48� RTA(A/B/C/D/E/F/G)14448-(1/2/3) 3,072. 3,530. 4,767.
Racetrack top - 3 piece Profile edge on all sidesexcept on parting lines
168� 42� RTA(A/B/C/D/E/F/G)16842-(1/2/3) 3,756. 4,320. 5,832.168� 48� RTA(A/B/C/D/E/F/G)16848-(1/2/3) 4,017. 4,620. 6,236.192� 42� RTA(A/B/C/D/E/F/G)19242-(1/2/3) 4,038. 4,642. 6,267.192� 48� RTA(A/B/C/D/E/F/G)19248-(1/2/3) 4,201. 4,832. 6,521.
Round tops Profile edge on all sides except onparting lines.
* 60� RTA(A/B/C/D/E/F/G)6060-(1/2/3) 2,309. 2,655. 3,583.* 72� RTA(A/B/C/D/E/F/G)7272-(1/2/3) 2,857. 3,286. 4,437.– 36� RTA(A/B/C/D/E/F/G)3636-(1/2/3) 771. 887. 1,197.– 42� RTA(A/B/C/D/E/F/G)4242-(1/2/3) 894. 1,027. 1,388.– 48� RTA(A/B/C/D/E/F/G)4848-(1/2/3) 1,472. 1,692. 2,284.
Order Code
Example: RTAG72302
R ReffT Racetrack topA 11/4� thickG Gamma72 22� wide30 30� deep2 V2 finishV319 Medium cherry
Specification Information
To order please specify patternnumber including:1. Edge profile2. Width3. Depth4. Finish type5. Finish
1. Edge profile options:A = AlphaB = BetaC = ChiD = DeltaE = EpsilonF = PhiG = Gamma
4. Finish type:M = Mixed (laminate surface / woodedge)1 = V12 = V23 = V3
*Round tops in two pieces.
Applicable finishes are listed onReff Profiles and Reff Profiles.
Products on this page do not acceptthe following finishes:Y341 WengeY342 Medium TeakY343 Dark Grey Oak
Application Notes
Knoll assumes no responsibilityfor special grommet locationswhich interfere with support orother hardware. All requests forspecial grommet locations mustbe approved through customproduct development.
Products on this page are shippedwithout hardware which must beordered separately from the supportcomponents section.
Worksurface stiffeners arerecommended to provide additionalsupport for open spans greater than48�w.
Knoll Office Tables
80
Optional edge 11/4�square and rectangular conference tops
description w d pattern no. V1 V2 V3
Rectangular top - 1 piece 72� 30� RRA(A/B/C/D/E/F/G)7230-(1/2/3) $725. $833. $1,125.72� 36� RRA(A/B/C/D/E/F/G)7236-(1/2/3) 788. 904. 1,221.84� 30� RRA(A/B/C/D/E/F/G)8430-(1/2/3) 801. 924. 1,248.84� 36� RRA(A/B/C/D/E/F/G)8436-(1/2/3) 860. 988. 1,335.84� 42� RRA(A/B/C/D/E/F/G)8442-(1/2/3) 1,273. 1,463. 1,975.96� 30� RRA(A/B/C/D/E/F/G)9630-(1/2/3) 900. 1,034. 1,396.96� 36� RRA(A/B/C/D/E/F/G)9636-(1/2/3) 994. 1,143. 1,545.96� 42� RRA(A/B/C/D/E/F/G)9642-(1/2/3) 1,461. 1,679. 2,266.
Rectangular top - 2 piece Profile edge on allsides except on parting lines
120� 36� RRA(A/B/C/D/E/F/G)12036-(1/2/3) 1,594. 1,833. 2,475.120� 42� RRA(A/B/C/D/E/F/G)12042-(1/2/3) 2,199. 2,528. 3,410.120� 48� RRA(A/B/C/D/E/F/G)12048-(1/2/3) 2,389. 2,748. 3,711.144� 42� RRA(A/B/C/D/E/F/G)14442-(1/2/3) 2,468. 2,843. 3,838.144� 48� RRA(A/B/C/D/E/F/G)14448-(1/2/3) 2,648. 3,043. 4,109.
Rectangular top - 3 piece Profile edge on allsides except on parting lines
168� 42� RRA(A/B/C/D/E/F/G)16842-(1/2/3) 3,239. 3,725. 5,028.168� 48� RRA(A/B/C/D/E/F/G)16848-(1/2/3) 3,517. 4,048. 5,465.192� 42� RRA(A/B/C/D/E/F/G)19242-(1/2/3) 3,508. 4,037. 5,449.192� 48� RRA(A/B/C/D/E/F/G)19248-(1/2/3) 3,777. 4,344. 5,862.
Square top Profile edge on all sides except onparting lines
* 60� RRA(A/B/C/D/E/F/G)6060-(1/2/3) 1,485. 1,708. 2,307.* 72� RRA(A/B/C/D/E/F/G)7272-(1/2/3) 1,751. 2,014. 2,719.– 36� RRA(A/B/C/D/E/F/G)3636-(1/2/3) 560. 643. 868.– 42� RRA(A/B/C/D/E/F/G)4242-(1/2/3) 725. 833. 1,125.– 48� RRA(A/B/C/D/E/F/G)4848-(1/2/3) 953. 1,094. 1,477.
Order Code
Example: RRAG72302
R ReffR Conference Room topA 11/4� thickG Gamma72 72� wide30 30� deep2 V2 finishV319 Medium cherry
Specification Information
To order please specify patternnumber including:1. Edge option2. Width3. Depth4. Finish type5. Finish
1. Edge profile options:A = AlphaB = BetaC = ChiD = DeltaE = EpsilonF = PhiG = Gamma
4. Finish type:M = Mixed ( laminate surface / woodedge)1 = V12 = V23 = V3
* Square tops in two pieces.
Applicable finishes are listed onReff Profiles and Reff Profiles.
Products on this page do not acceptthe following finishes:Y341 WengeY342 Medium TeakY343 Dark Grey Oak
Application Notes
Knoll assumes no responsibilityfor special grommet locationswhich interfere with support orother hardware. All requests forspecial grommet locations mustbe approved through customproduct development.
Products on this page are shippedwithout hardware which must beordered separately from the supportcomponents section.
Worksurface stiffeners arerecommended to provide additionalsupport for open spans greater than48�w.
Knoll Office Tables
81
Ref
fP
rofil
es
Waterfall Edge 11/4�2� Waterfall edge conference room topsround and racetrack
description w d pattern no. V1 V2 V3
Racetrack top - one piece 72� 30� RTAW7230-(1/2/3) $3,916. $4,501. $6,078.72� 36� RTAW7236-(1/2/3) 4,463. 5,130. 6,925.84� 30� RTAW8430-(1/2/3) 4,358. 5,012. 6,767.84� 36� RTAW8436-(1/2/3) 5,017. 5,770. 7,787.84� 42� RTAW8442-(1/2/3) 6,108. 7,026. 9,486.96� 30� RTAW9630-(1/2/3) 4,852. 5,578. 7,532.96� 36� RTAW9636-(1/2/3) 5,566. 6,405. 8,647.96� 42� RTAW9642-(1/2/3) 6,839. 7,863. 10,614.
Racetrack top - two piece, Waterfall edge on allsides except on parting lines
120� 36� RTAW12036-(1/2/3) 7,191. 8,267. 11,162.120� 42� RTAW12042-(1/2/3) 7,754. 8,915. 12,037.144� 42� RTAW14442-(1/2/3) 8,550. 9,832. 13,274.
Racetrack top - three piece, Waterfall edge on allsides except on parting lines
168� 42� RTAW16842-(1/2/3) 10,721. 12,331. 16,647.192� 42� RTAW19242-(1/2/3) 11,518. 13,248. 17,886.
RTAW16842-(1/2) comes with 2-60� pieces/1-48� centerRTAW19242-(1/2) comes with 2-72� pieces/1-48� center
Round tops, Waterfall edge on all sides except onparting lines
* 60� RTAW6060-(1/2/3) 6,590. 7,574. 10,226.* 72� RTAW7272-(1/2/3) 8,156. 9,378. 12,660.– 36� RTAW3636-(1/2/3) 2,204. 2,954. 3,988.– 42� RTAW4242-(1/2/3) 2,551. 3,423. 4,622.
Order Code
Example: RTAW72302
R ReffT Rounded topA 11/4� thickW Waterfall all sides72 72� wide30 30� deep2 V2 finishV319 Medium cherry
Specification Information
To order please specify patternnumber including:1. Top thickness2. Finish type3. Finish
1. Thickness option:A = 11/4�
2. Finish type:1 = V12 = V23 = V3
*Round tops in two pieces.
Application Notes
Top to top brackets included.
See table base matrix in PlanningGuide for base supportsrecommended.
Worksurface stiffeners arerecommended to provide additionalsupport for open spans greater than48�w.
Tops have no radius on edges thatadjoin.
All tops on this page are withoutgrommets or drillings. The intendeduse of these products is to provideconference room table options.
Waterfall tops cannot be specifiedwith semi-open pore finish.
Actual widths of worksurfaceare1/16� less than nominaldimension. Actual depth is1/8� lessthan nominal dimension.
Applicable finishes are listed onReff Profiles and Reff Profiles.
Products on this page do not acceptthe following finishes:Y341 WengeY342 Medium TeakY343 Dark Grey Oak
Knoll Office Tables
82
Waterfall Edge 11/4�2� Waterfall edge conference room topssquare and rectangular
description w d pattern no. V1 V2 V3
Rectangular top - one piece 72� 30� RRAW7230-(1/2/3) $2,067. $2,380. $3,214.72� 36� RRAW7236-(1/2/3) 2,247. 2,584. 3,488.84� 30� RRAW8430-(1/2/3) 2,287. 2,632. 3,553.84� 36� RRAW8436-(1/2/3) 2,458. 2,823. 3,812.84� 42� RRAW8442-(1/2/3) 3,633. 4,176. 5,639.96� 30� RRAW9630-(1/2/3) 2,566. 2,952. 3,985.96� 36� RRAW9636-(1/2/3) 2,838. 3,261. 4,403.96� 42� RRAW9642-(1/2/3) 4,166. 4,791. 6,468.
Rectangular top - two piece, Waterfall edge on allsides except on parting lines
120� 36� RRAW12036-(1/2/3) 4,545. 5,232. 7,063.120� 42� RRAW12042-(1/2/3) 6,274. 7,216. 9,742.144� 42� RRAW14442-(1/2/3) 7,048. 8,106. 10,942.
Rectangular top - three piece, Waterfall edge onall sides except on parting lines
168� 42� RRAW16842-(1/2/3) 9,241. 10,630. 14,353.192� 42� RRAW19242-(1/2/3) 10,014. 11,514. 15,545.
RRAW16842-(1/2) comes with 2-60� pieces/1-48� centerRRAW19242-(1/2) comes with 2-72� pieces /1-48� center
Square top - one piece – 36� RRAW3636-(1/2/3) 1,599. 2,142. 2,894.– 42� RRAW4242-(1/2/3) 2,067. 2,774. 3,745.
Square top - two piece, Waterfall edge not onparting lines
– 60� RRAW6060-(1/2/3) 4,235. 4,868. 6,572.– 72� RRAW7272-(1/2/3) 5,001. 5,752. 7,764.
Order Code
Example: RRAW72302
R ReffR RectangularA 11/4� thickW Waterfall all sides72 72� wide30 30� deep2 V2 finishV319 Medium cherry
Specification Information
To order please specify patternnumber including:1. Top thickness2. Finish type3. Finish
1. Thickness option:A = 11/4�
2. Finish type:1 = V12 = V23 = V3
Applicable finishes are listed onReff Profiles and Reff Profiles.
Products on this page do not acceptthe following finishes:Y341 WengeY342 Medium TeakY343 Dark Grey Oak
Application Notes
All tops on this page are withoutgrommets or drillings. The intendeduse of these products is to provideconference room table options.
Top to top brackets included.
Tops have no radius on edges thatadjoin.
See table base matrix in PlanningGuide for base supportsrecommended.
Worksurface stiffeners arerecommended to provide additionalsupport for open spans greater than48�w.
Waterfall tops cannot be specifiedwith semi-open pore finish.
Actual widths of worksurfaceare1/16� less than nominaldimension. Actual depth is1/8� lessthan nominal dimension.
Knoll Office Tables
83
Ref
fP
rofil
es
Tables, 11/2�Rectangle with L-Leg30� and 36� deep
description d w th pattern no. L M/V1 V2 V3
Table Top Rectangle 30� Deepwith 261/2� height leg
30� 48� 11/2� RTRDL48301( )( ) $1,381. $1,469. $1,535. $1,794.30� 60� 11/2� RTRDL60301( )( ) 1,451. 1,544. 1,623. 1,936.30� 72� 11/2� RTRDL72301( )( ) 1,496. 1,592. 1,686. 2,051.
Table Top Rectangle 36� Deepwith 261/2� height leg
36� 72� 11/2� RTRDL72361( )( ) 1,544. 1,643. 1,752. 2,172.
Table Top Rectangle 30� Deepwith 283/8� height leg
30� 48� 11/2� RTRDL48302( )( ) 1,441. 1,529. 1,595. 1,854.30� 60� 11/2� RTRDL60302( )( ) 1,511. 1,604. 1,683. 1,996.30� 72� 11/2� RTRDL72302( )( ) 1,556. 1,652. 1,746. 2,111.
Table Top Rectangle 36� Deepwith 283/8� height leg
36� 72� 11/2� RTRDL72362( )( ) 1,604. 1,703. 1,812. 2,232.
Order Code
Example: RTRDL48301 ( )( )
R ReffTR Table RectangularD 11/2�L L-Leg48 Width30 Depth1 261/2� height legV316 Finish111 Leg Finish
Specification Information
To order please specify patternnumber including:1. Worksurface finish
L, V1, V2, V32. Leg finish
Painted / Anodized
Application Notes
Assembly required, ships knockdown.
Modesty sold separately.
Worksurface stiffeners,recommended to provide additionalsupport for open spans greater than48�w.
Grommets are NOT optional forthese tables.
Knoll Office Tables
84
Tables, 11/2�Rectangle with Reverse L-Leg30� and 36� deep
description d w th pattern no. L M/V1 V2 V3
Table Top Rectangle 30� Deepwith 261/2� height leg
30� 48� 11/2� RTRDRL48301( )( )( )( ) $1,381. $1,469. $1,535. $1,794.30� 60� 11/2� RTRDRL60301( )( )( )( ) 1,451. 1,544. 1,623. 1,936.30� 72� 11/2� RTRDRL72301( )( )( )( ) 1,496. 1,592. 1,685. 2,051.
Table Top Rectangle 36� Deepwith 261/2� height leg
36� 72� 11/2� RTRDRL72361( )( )( )( ) 1,544. 1,643. 1,752. 2,172.
Table Top Rectangle 30� Deepwith 283/8� height leg
30� 48� 11/2� RTRDRL48302( )( )( )( ) 1,441. 1,529. 1,595. 1,854.30� 60� 11/2� RTRDRL60302( )( )( )( ) 1,511. 1,604. 1,683. 1,996.30� 72� 11/2� RTRDRL72302( )( )( )( ) 1,556. 1,652. 1,745. 2,111.
Table Top Rectangle 36� Deepwith 283/8� height leg
36� 72� 11/2� RTRDRL72362( )( )( )( ) 1,604. 1,703. 1,812. 2,232.
Order Code
Example: RTRDRL48301 ( )( )( )( )
R ReffTR Table RectangularD 11/2�RL Reverse L-Leg48 Width30 Depth1 261/2� height legV316 Finish111 Leg Finish
Specification Information
To order please specify patternnumber including:1. Worksurface finish
L, V1, V2, V32. Leg finish
Painted / Anodized
Application Notes
Assembly required, ships knockdown.
Modesty sold separately.
Worksurface stiffeners,recommended to provide additionalsupport for open spans greater than48�w.
Grommets are NOT optional forthese tables.
Knoll Office Tables
85
Ref
fP
rofil
es
Tables, 11/2�Rectangle with Soft Rectangular Leg30� and 36� deep
description depth width thickness pattern number L M/V1 V2 V3
Table Top Rectangle 30� Deepwith 261/2� height leg
30� 48� 11/2� RTRDS48301( )( )( )( ) $1,277. $1,359. $1,425. $1,684.30� 60� 11/2� RTRDS60301( )( )( )( ) 1,348. 1,434. 1,513. 1,826.30� 72� 11/2� RTRDS72301( )( )( )( ) 1,393. 1,482. 1,575. 1,942.
Table Top Rectangle 36� Deepwith 261/2� height leg
36� 72� 11/2� RTRDS72361( )( )( )( ) 1,441. 1,533. 1,642. 2,062.
Table Top Rectangle 30� Deepwith 283/8� height leg
30� 48� 11/2� RTRDS48302( )( )( )( ) 1,337. 1,419. 1,485. 1,744.30� 60� 11/2� RTRDS60302( )( )( )( ) 1,408. 1,494. 1,573. 1,886.30� 72� 11/2� RTRDS72302( )( )( )( ) 1,453. 1,542. 1,635. 2,002.
Table Top Rectangle 36� Deepwith 283/8� height leg
36� 72� 11/2� RTRDS72362( )( )( )( ) 1,501. 1,593. 1,702. 2,122.
Order Code
Example: RTRDS48301 ( )( )( )( )
R ReffTR Table RectangularD 11/2�S Soft Rectangular Leg48 Width30 Depth1 261/2� height legV316 Finish111 Leg Finish
Specification Information
To order please specify patternnumber including:1. Worksurface finish
L, V1, V2, V32. Leg finish
Painted / Anodized
Application Notes
Assembly required, ships knockdown.
Modesty sold separately.
Worksurface stiffeners,recommended to provide additionalsupport for open spans greater than48�w.
Grommets are NOT optional forthese tables.
Knoll Office Tables
86
Tables, 11/2�Square with L-Leg42� and 48� deep
description w d th pattern no. L V1 V2 V3
Table Top Square with 261/2� height legs 42� 42� 11/2� RTSDL42421( )( )( )( ) $1,419. $1,510. $1,588. $1,890.48� 48� 11/2� RTSDL48481( )( )( )( ) 1,481. 1,576. 1,675. 2,050.
Table Top Square with 283/8� height legs 42� 42� 11/2� RTSDL42422( )( )( )( ) 1,476. 1,570. 1,648. 1,950.48� 48� 11/2� RTSDL48482( )( )( )( ) 1,538. 1,636. 1,735. 2,110.
Order Code
Example: RTSDL42421 ( )( )( )( )
R ReffTS Table SquareD 11/2�L L-Leg42 Width42 Depth1 261/2� height legV316 Finish111 Leg Finish
Specification Information
To order please specify patternnumber including:1. Worksurface finish
L, V1, V2, V32. Leg finish
Painted / Anodized
Application Notes
Assembly required, ships knockdown.
Modesty sold separately.
Grommets are NOT optional forthese tables.
Knoll Office Tables
87
Ref
fP
rofil
es
Tables, 11/2�Square with Reverse L-Leg42� and 48� deep
description th d w pattern no. L V1 V2 V3
Table Top Square with 261/2� height legs 11/2� 42� 42� RTSDRL42421( )( )( )( ) $1,419. $1,510. $1,588. $1,890.11/2� 48� 48� RTSDRL48481( )( )( )( ) 1,481. 1,576. 1,675. 2,050.
Table Top Square with 283/8� height legs 11/2� 42� 42� RTSDRL42422( )( )( )( ) 1,476. 1,570. 1,648. 1,950.11/2� 48� 48� RTSDRL48482( )( )( )( ) 1,538. 1,636. 1,735. 2,110.
Order Code
Example: RTSDRL42421 ( )( )( )( )
R ReffTS Table SquareD 11/2�RL Reverse L-Leg42 Width42 Depth1 261/2� height legV316 Finish111 Leg Finish
Specification Information
To order please specify patternnumber including:1. Worksurface finish
L, V1, V2, V32. Leg finish
Painted / Anodized
Application Notes
Assembly required, ships knockdown.
Modesty sold separately.
Grommets are NOT optional forthese tables.
Knoll Office Tables
88
Tables, 11/2�Square with Soft Rectangular Leg42� and 48� deep
description th d w pattern no. L V1 V2 V3
Table Top Square with 261/2� height legs 11/2� 42� 42� RTSDS42421( )( )( )( ) $1,456. $1,549. $1,627. $1,928.11/2� 48� 48� RTSDS48481( )( )( )( ) 1,518. 1,615. 1,713. 2,089.
Table Top Square with 283/8� height legs 11/2� 42� 42� RTSDS42422( )( )( )( ) 1,512. 1,609. 1,687. 1,988.11/2� 48� 48� RTSDS48482( )( )( )( ) 1,575. 1,675. 1,773. 2,149.
Order Code
Example: RTSDS42421 ( )( )( )( )
R ReffTS Table SquareD 11/2�S Soft Rectangular-Leg42 Width42 Depth1 261/2� height legV316 Finish111 Leg Finish
Specification Information
To order please specify patternnumber including:1. Worksurface finish
L, V1, V2, V32. Leg finish
Painted / Anodized
Application Notes
Assembly required, ships knockdown.
Modesty sold separately.
Grommets are NOT optional forthese tables.
Knoll Office Tables
89
Ref
fP
rofil
es
Tables, 11/2�Round with Column Leg36�, 42� and 48� diameter
description th dia. pattern no. L V1 V2 V3
Table Top Round with 261/2� height legs 11/2� 36� RTNDC361( )( )( )( ) $2,369. $2,520. $2,579. $2,791.11/2� 42� RTNDC421( )( )( )( ) 2,429. 2,584. 2,661. 2,934.11/2� 48� RTNDC481( )( )( )( ) 2,489. 2,648. 2,745. 3,088.
Table Top Round with 283/8� height legs 11/2� 36� RTNDC422( )( )( )( ) 2,425. 2,580. 2,639. 2,851.11/2� 42� RTNDC362( )( )( )( ) 2,485. 2,644. 2,721. 2,994.11/2� 48� RTNDC482( )( )( )( ) 2,546. 2,708. 2,805. 3,148.
Order Code
Example: RTNDC361 ( )( )( )( )
R ReffTN Table RoundD 11/2�C Column Leg36 Diameter1 261/2� height legV316 Finish111 Leg Finish
Specification Information
To order please specify patternnumber including:1. Worksurface finish
L, V1, V2, V32. Leg finish
Painted / Plated
Application Notes
Assembly required, ships knockdown.
Modesty sold separately.
Grommets are NOT optional forthese tables.
Knoll Office Tables
90
Tables, 1�Laminate
description d w th pattern no. L
Round Table with 261/2� height legs 36� 1� RSTRLE361( )( ) $2,918.42� 1� RSTRLE421( )( ) 2,976.
Round Table with 283/8� height legs 36� 1� RSTRLE362( )( ) 2,974.42� 1� RSTRLE422( )( ) 3,032.
Soft Square Table with 261/2� height legs 36� 1� RSTSLE361( )( ) 2,892.42� 1� RSTSLE421( )( ) 2,954.
Soft Square Table with 283/8� height legs 36� 1� RSTSLE362( )( ) 2,949.42� 1� RSTSLE422( )( ) 3,011.
Soft Rectangle Table with 261/2� height legs 30� 48� 1� RSTTLE30481( )( ) 2,725.36� 54� 1� RSTTLE36541( )( ) 2,797.
Soft Rectangle Table with 283/8� height legs 30� 48� 1� RSTTLE30482( )( ) 2,781.36� 54� 1� RSTTLE36542( )( ) 2,853.
Order Code
Example: RSTRLE361 ( )( )
R ReffST Slider TableR RoundL Laminate surfaceE 1� thick42 42� diameter1 261/2� height leg114 Finish118T Leg Finish
Specification Information
To order please specify patternnumber including:1. Worksurface finish:
Laminate only2. Leg Textured finish:
111T, 115T, 118T
Application Notes
Assembly required.
Ships knocked down.
Grommets are not an option forthese tables.
Column and base are color matched
Column = smooth
Base = textured
Knoll Office Tables
91
Ref
fP
rofil
es
Tables, 1�Wood
description d w th pattern no. V1 V2 V3
Round Table with 261/2� height legs 36� 1� RSTRWE361( )( ) $3,104. $3,152. $3,396.42� 1� RSTRWE421( )( ) 3,166. 3,230. 3,533.
Round Table with 283/8� height legs 36� 1� RSTRWE362( )( ) 3,164. 3,212. 3,456.42� 1� RSTRWE422( )( ) 3,226. 3,290. 3,593.
Soft Square Table with 261/2� height legs 36� 1� RSTSWE361( )( ) 3,077. 3,125. 3,390.42� 1� RSTSWE421( )( ) 3,143. 3,206. 3,533.
Soft Square Table with 283/8� height legs 36� 1� RSTSWE362( )( ) 3,137. 3,185. 3,450.42� 1� RSTSWE422( )( ) 3,203. 3,266. 3,593.
Soft Rectangle Table with 261/2� height legs 30� 48� 1� RSTTWE30481( )( ) 2,899. 2,951. 3,238.36� 54� 1� RSTTWE36541( )( ) 2,975. 3,044. 3,397.
Soft Rectangle Table with 283/8� height legs 30� 48� 1� RSTTWE30482( )( ) 2,959. 3,011. 3,298.36� 54� 1� RSTTWE36542( )( ) 3,035. 3,104. 3,457.
Order Code
Example: RSTRWE361 ( )( )
R ReffST Slider TableR RoundW Wood surfaceE 1� thick42 42� diameter1 261/2� height legV316 Finish111T Leg Finish
Specification Information
To order please specify patternnumber including:1. Worksurface finish
V1, V2, V3 wood only2. Leg Textured finish:
111T, 115T, 118T
Column and base are color matched.
Column=smooth
Base=textured
Application Notes
Assembly required, ships knockdown.
Grommets are not an option forthese tables.
Knoll Office Tables
92
Tables, 1�Solid
description d w th pattern no. Solid
Round Table with 261/2� height legs 36� 1� RSTRSE361( )( ) $7,959.42� 1� RSTRSE421( )( ) 9,119.
Round Table with 283/8� height legs 36� 1� RSTRSE362( )( ) 7,959.42� 1� RSTRSE422( )( ) 9,119.
Soft Square Table with 261/2� height legs 36� 1� RSTSSE361( )( ) 7,116.42� 1� RSTSSE421( )( ) 8,393.
Soft Square Table with 283/8� height legs 36� 1� RSTSSE362( )( ) 7,116.36� 1� RSTSSE362( )( ) 7,116.
Soft Rectangle Table with 261/2� height legs 30� 48� 1� RSTTSE30481( )( ) 8,769.36� 54� 1� RSTTSE36541( )( ) 9,724.
Soft Rectangle Table with 283/8� height legs 30� 48� 1� RSTTSE30482( )( ) 8,769.36� 54� 1� RSTTSE36542( )( ) 9,724.
Order Code
Example: RSTRSE361 ( )( )
R ReffST Slider TableR RoundS SolidE 1� thick42 42� diameter1 261/2� height legAW Worksurface finish111T Leg Finish
Specification Information
To order please specify patternnumber including:1. Worksurface finish:
AW=Artic White, only2. Leg finish Textured:
111T, 115T, 118T
Application Notes
Assembly required.
Ships knocked down.
Grommets are not an option forthese tables.
Artic White finish available forsolid tops.
Column and base are color matched.
Column=smooth
Base=textured
Knoll Office Tables
93
Ref
fP
rofil
es
Top support componentsPainted or Plated Legs 261/2� high planning
description dia. w h d pattern no. P1 P2 P3 metal
Column leg, Interaction style (rectangular plate) 4� – 261/2� – RSC $243. $256. $269. $243.
4� Plain Cylinder (261/2� high) 4� – 261/2� – RCB 255. 268. 280. 255.
Set of four column legs (4� dia.), Interaction style(triangular plate)
4� – 261/2� – RSC4-( ) 948. 994. 1,046. 948.
T-leg, Interaction style – 261/2� 24� RIB24T 348. 365. 384. 348.
T-Leg, plain tube style – 261/2� 20� RCB20T-( ) 376. 395. 414. 376.- 261/2� 24� RCB24T-( ) 382. 404. 423. 382.- 261/2� 30� RCB30T-( ) 423. 443. 467. 423.- 261/2� 40� RCB40T-( ) 445. 469. 493. 445.
Order Code
Example: RSC
R ReffS SupportC Cylinder
Specification Information
To order please specify patternnumber including:1. Finish type, where applicable2. Finish
Finish type options:P = PaintM = Metal (plated)
Application Notes
Cylinder bases, T-legs, X-bases areKnoll Interaction style. Trim ringwill be black.
Interaction style cylinder base,column legs, T-leg, and X-base arenot available in plated finishes.
Refer to Planning Guide fortop-base matrix, pages 140 and 141.
All bases include 11/2� leveller.
Only the plain cylinder and tubelegs can be ordered in platedfinishes.
Applicable finishes are listed onReff Profiles and Reff Profiles.
Knoll Office Tables
94
Top support componentsPainted or Plated Bases 261/2� high planning
description h dia. pattern no. P1 P2 P3 metal
X-base 261/2� 28� RIB28X-( ) $574. $604. $635. $574.261/2� 32� RIB32X-( ) 778. 819. 860. 778.
Spider base, plain tube style 261/2� 24� RCB24X 588. 618. 648. 588.261/2� 28� RCB28X 616. 646. 678. 616.261/2� 36� RCB36X 667. 702. 736. 667.
Drum base 261/2� – RSD1427-( ) 1,110. 1,166. 1,223. 1,110.261/2� – RSD1827-( ) 1,206. 1,267. 1,329. 1,206.261/2� – RSD2027-( ) 1,244. 1,306. 1,370. 1,244.261/2� – RSD2427-( ) 1,489. 1,565. 1,642. 1,489.261/2� – RSD3027-( ) 1,665. 1,747. 1,834. 1,665.
Order Code
Example: RIB28X
R ReffI InteractionB Base28 DiameterX X-base
Specification Information
To order please specify patternnumber including:1. Finish type, where applicable2. Finish
Finish type options:P = PaintM = Metal (plated)
Application Notes
Cylinder bases, T-legs, X-bases areKnoll Interaction style. Trim ringwill be black.
Interaction style cylinder base,column legs, T-leg, and X-base arenot available in plated finishes.
Refer to Planning Guide fortop-base matrix, pages 140 and 141.
All bases include 11/2� leveller.
Only the plain cylinder and tubelegs can be ordered in platedfinishes.
Applicable finishes are listed onReff Profiles and Reff Profiles.
Knoll Office Tables
95
Ref
fP
rofil
es
Top support componentsLaminate or Wood Bases 261/2� high planning
description dia. w h d pattern no. L V1 V2 V3
Drum base 14� 261/2� – RSD1427-( ) n/a $1,297. $1,493. $2,016.18� 261/2� – RSD1827-( ) n/a 1,409. 1,621. 2,190.20� 261/2� – RSD2027-( ) n/a 1,455. 1,673. 2,258.24� 261/2� – RSD2427-( ) n/a 1,744. 2,006. 2,708.30� 261/2� – RSD3027-( ) n/a 1,949. 2,238. 3,021.
T-base (hardware included)* 20� 261/2� 12� RST1-( ) 415. 470. 549. 743.24� 261/2� 12� RST2-( ) 444. 506. 581. 785.30� 261/2� 12� RST3-( ) 522. 586. 679. 917.36� 261/2� 12� RST4-( ) 593. 673. 772. 1,043.42� 261/2� 12� RST5-( ) 658. 749. 863. 1,167.48� 261/2� 12� RST6-( ) 734. 826. 954. 1,288.
L-base (hardware included), non-handed* 12� 261/2� 12� RSL12-( ) 415. 470. 549. 743.15� 261/2� 12� RSL15-( ) 424. 481. 554. 748.20� 261/2� 12� RSL20-( ) 444. 497. 574. 775.24� 261/2� 12� RSL24-( ) 451. 506. 581. 785.30� 261/2� 12� RSL30-( ) 522. 586. 679. 917.36� 261/2� 12� RSL36-( ) 593. 673. 772. 1,043.42� 261/2� 12� RSL42-( ) 658. 749. 863. 1,167.48� 261/2� 12� RSL48-( ) 734. 826. 954. 1,288.
Order Code
Example: RSD1427
R ReffS SupportD Drum base14 Diameter27 Height2 Finish typeR319 V2- Med. Cherry
Specification Information
To order please specify patternnumber including:1. Finish type2. Finish
Finish type options:L = Laminate1 = V12 = V23 = V3
Application Notes
Refer to Planning Guide fortop-base matrix, pages 140 and 141.
All bases include 11/2� leveller.
Product on this page will acceptwoodgrain laminate where laminateis currently an option.List price for woodgrain laminateoptions will be current publishedlaminate list price plus 10%.
T and L bases are not recommendedfor supporting conference tops.
Applicable finishes are listed onReff Profiles and Reff Profiles.
Knoll Office Tables
96
Top support componentsPainted or Plated Legs 283/8� high planning
description dia. w he d pattern no. P1 P2 P3
Column Leg, Interaction style w/ rectanglar plate(desk height)
4� dia – 283/8� RSDHC ( )( ) $256. $269. $281.
4� Plain Cylinder (desk height) 4� dia – 283/8� RCDHB ( )( ) 268. 280. 295.
Set of 4 Column legs, Interaction stylew/triangular plate (desk height)
4� dia – 283/8� RSDHC4( )( ) 996. 1,045. 1,098.
T-Leg, plain tube style (desk height) – 283/8� 20� RCDHB20T ( )( ) 395. 415. 435.– 283/8� 24� RCDHB24T ( )( ) 403. 423. 444.– 283/8� 30� RCDHB30T ( )( ) 444. 467. 490.– 283/8� 40� RCDHB40T ( )( ) 469. 493. 517.
T-Leg, Interaction style (desk height) – 283/8� 24� RIBDH24T ( )( ) 365. 384. 404.
Order Code
Example: RSDHCP111
R ReffS SupportDH Desk HeightC Column LegP Finish type, paint111 Finish, Jet Black
Specification Information
To order please specify patternnumber including:1. Finish Type, where applicable
P = PaintM = Metal (plated)
2. Finishsee matrix on Reff Profiles
Applicable finishes are listed onReff Profiles and Reff Profiles.
Application Notes
Cylinder/column leg bases, T-Legs,X-bases are Knoll Interaction style.Trim ring will be black.
Interaction style cylinder base,column legs, T-leg and X-base arenot available in plated finishes.Only the plain cylinder and the tubelegs can be ordered in platedfinishes.
All bases include 11/2� leveller.
Refer to Top to Base matrix, pages140 and 141 in the Reff planningguide.
Products on this page are 28-3/8�high. 283/8�h ‘‘desk height’’products should not be mixed with261/2�h components. 283/8�hcomponents when used with 11/4�worksurfaces achieve overall deskheight of 295/8�h. 28-3/8� ‘‘deskheight’’ products may be specifiedfor freestanding or panel basedapplications.
Knoll Office Tables
97
Ref
fP
rofil
es
Top support componentsPainted or Plated Bases 283/8� high planning
description dia. w h d pattern no. P1 P2 P3
X-base (desk height) – 283/8� 28� RIBDH28X ( )( ) $604. $634. $666.– 283/8� 32� RIBDH32X ( )( ) 819. 859. 901.
Spider base, plain tube style (desk height) – 283/8� 24� RCBDH24X ( )( ) 618. 648. 680.– 283/8� 28� RCBDH28X ( )( ) 646. 678. 713.– 283/8� 36� RCBDH36X ( )( ) 702. 737. 772.
Drum Base (desk height) 14� – 283/8� – RSDHD1428 ( )( ) 1,166. 1,223. 1,286.18� – 283/8� – RSDHD1828 ( )( ) 1,267. 1,329. 1,395.20� – 283/8� – RSDHD2028 ( )( ) 1,306. 1,370. 1,438.24� – 283/8� – RSDHD2428 ( )( ) 1,565. 1,642. 1,725.30� – 283/8� – RSDHD3028 ( )( ) 1,747. 1,835. 1,926.
Base Support Column, 3� dia. 283/8� RSDHC3 ( )( ) 310. 310. 434.
Order Code
Example: RCBDH24X
R Reff
P Finish type, paint111 Finish, Jet Black
Specification Information
To order please specify patternnumber including:1. Finish Type, where applicable
P = PaintM = Metal (plated)
2. Finishsee matrix on Reff Profiles
Applicable finishes are listed onReff Profiles and Reff Profiles.
Application Notes
Refer to Top to Base matrix, pages140 and 141 in the Reff planningguide.
Products on this page are 28-3/8�high. 283/8�h ‘‘desk height’’products should not be mixed with261/2�h components. 283/8�hcomponents when used with 11/4�worksurfaces achieve overall deskheight of 295/8�h. 28-3/8� ‘‘deskheight’’ products may be specifiedfor freestanding or panel basedapplications.
Knoll Office Tables
98
Top support componentsLaminate or Wood Bases 2/83/8� high planning
description dia. w h d pattern no. L V1 V2 V3
Drum Base (desk height) 14� – 283/8� – RSDHD1428 ( )( ) N/A $1,363. $1,567. $2,115.18� – 283/8� – RSDHD1828 ( )( ) N/A 1,481. 1,702. 2,299.20� – 283/8� – RSDHD2028 ( )( ) N/A 1,527. 1,755. 2,371.24� – 283/8� – RSDHD2428 ( )( ) N/A 1,830. 2,107. 2,845.30� – 283/8� – RSDHD3028 ( )( ) N/A 2,046. 2,350. 3,173.
T-base, desk height (hardware included) 20� 283/8� 12� RSDHT1 ( )( ) 436. 495. 575. 778.24� 283/8� 12� RSDHT2 ( )( ) 468. 531. 611. 824.30� 283/8� 12� RSDHT3 ( )( ) 548. 618. 713. 963.36� 283/8� 12� RSDHT4 ( )( ) 623. 708. 812. 1,095.42� 283/8� 12� RSDHT5 ( )( ) 691. 786. 907. 1,224.48� 283/8� 12� RSDHT6 ( )( ) 770. 869. 1,002. 1,354.
L-base, desk height (hardware included,non-handed)
12� 283/8� 12� RSDHL12 ( )( ) 436. 495. 575. 778.15� 283/8� 12� RSDHL15 ( )( ) 445. 502. 581. 785.20� 283/8� 12� RSDHL20 ( )( ) 468. 521. 605. 817.24� 283/8� 12� RSDHL24 ( )( ) 474. 531. 611. 824.30� 283/8� 12� RSDHL30 ( )( ) 548. 618. 713. 963.36� 283/8� 12� RSDHL36 ( )( ) 623. 708. 812. 1,095.42� 283/8� 12� RSDHL42 ( )( ) 691. 786. 907. 1,224.48� 283/8� 12� RSDHL48 ( )( ) 770. 869. 1,002. 1,354.
Order Code
Example: RSDHD1428
R ReffS SupportDH Desk HeightD Drum base14 Diameter28 Height2 Finish type, V2V316 Finish, Maple
Specification Information
To order please specify patternnumber including:1. Finish Type, where applicable
L = Laminate1 = V12 = V23 = V3
2. Finishsee matrix on Reff Profiles
Applicable finishes are listed onReff Profiles and Reff Profiles.
Application Notes
odT and L bases are notrecommended for supportingconference tops.
All bases include 11/2� leveller.
Refer to Top to Base matrix, pages140 and 141 in the Reff planningguide.
Products on this page are 28-3/8�high. 283/8�h ‘‘desk height’’products should not be mixed with261/2�h components. 283/8�hcomponents when used with 11/4�worksurfaces achieve overall deskheight of 295/8�h. 28-3/8� ‘‘deskheight’’ products may be specifiedfor freestanding or panel basedapplications.
Knoll Office Tables
99
Ref
fP
rofil
es
Construction and Shipping Information
DesignMagnusson is designed with theworkplace of the 21st century inmind. It is an aesthetically versatile,up-to-date furniture solution withwire management features that makeit easy to bring power andcommunication utilities to theworksurface.
Edge and Pull DetailS-pull, stainless steel finish only
Leather pull(LEA, brown or LEB, black)
upcharge applicable
Downtown™Sculptured edge
FinishingAll V2 Magnusson units are finishedwith closed-pore natural beechsubstrate veneer. Veneer is cut to a0.5mm thickness. A uniquepolyurethane coating technique,provides superior resistance tosolvents, stains, abrasion and heat.
Drawer and door fronts of allcomponents are flitch matched.
Grain pattern and color vary withnatural veneer. In addition, grain andcolor vary between natural veneerand solid hardwood. Each unit willreflect the uniqueness of the wood.
Tops and PanelsAll tops and panels incorporatenatural wood veneer over a particleboard substrate.
All desk, return, credenza and bridgeworksurface tops are 11/4� thick.
All desk and credenza modestypanels are 3/4� thick.
Modesty panels are recessed 61/2� ondesks, 11/16� on returns, bridges, andcredenzas.
PedestalsAll Box-Box-File and File-Filepedestals are 15� wide. Double Doorpedestals on 66� wide four-positioncredenzas are 35� wide. Double Doorpedestals on 72� wide four-positioncredenzas are 41� wide.
All Magnusson doors are hinged toopen 100° from the closed position.
DrawersDrawer interiors are optional metalor wood; upcharge applicable forwood interior option.
All box drawers operate onthree-quarter extension metalsuspensions. File drawers operate onthree-part, full-extension metalsuspensions. All suspensions operateon steel ball bearings.
The top box drawer of all woodinterior Box-Box-File pedestalsincludes two adjustable dividers. Aremovable hardwood pencil tray isincluded in top box drawer of eachdesk, with wood interior. Metaldrawer interiors do not accommodatedividers. One black plastic penciltray is included in top box drawer ofeach desk with metal interior.
Paper FilingAll pedestal file drawers and lateralfile drawers include steel bars forPendaflex file suspension. Drawerscan be converted from letter to legalfiling.
Note:File drawer interiors are designed forsuspended files. Excessive weightplaced directly on drawer bottomsmay cause damage that is notcovered by warranty.
Desk Pedestal Filing Options:Letter: One row front-to-back orside-to-sideLegal: One row side-to-side
Return and Credenza Filing Options:Letter: One row front-to-back orside-to-sideLegal: One row side-to-side
Lateral File Filing Options:Letter: Two rows front-to-back or onerow side-to-sideLegal: One row front-to-back orside-to-side
Knoll Office Tables
100
Construction and Shipping Information page2
GrommetsGrommets for wire access are stan-dard on desks, returns, kneespacecredenzas and bridge worksurfaces.If grommets are not required, specify‘‘no grommets’’ afterorder code.
Grommets are black.
Grommet location on desks is 91/4�centered from approach side, 18�centered from side. Grommetlocation on returns and bridges is 5�centered from back, centered onworksurface.
The following illustrations indicatethe standard grommet quantity andplacement:
Desks:
Returns:
Credenzas:
Bridge Worksurfaces:
Round Meeting Tables:Specify grommet for wiring (optionalwith a $15.00 list upcharge).
Racetrack Tables:Specify grommets for wiring (optionalwith a $33.00 list upcharge)
Bullet-top desksSpecify grommets for wiring (optionalwith a $33.00 list upcharge)
LockingAll desk, return and credenza drawerpedestals are drilled for independentlocks. All lateral files are drilled forindependent locks.
Hutches and wall-mounted overheadcabinets are not available with locks.
All lock facings are black.All locks ordered separately.
All locks are customer installed.Random key locks will be shippedunless a key order form accompaniesthe purchase order.
A master key and core removal keyare available from Customer Service.
BracketsAll returns and bridge worksurfacesare shipped with steel brackets andscrews to permit easy in-fieldattachment to desks and/or credenzas.Returns attach to single-pedestaldesks with two steel brackets andwood screws. Bridge worksurfacesattach to single-pedestal desks andU-configuration credenzas with foursteel brackets and wood screws.
LightingA fluorescent light unit can bespecified for use under the hutch andwall-mounted overhead cabinet. Theunit has a black paint finish. A wiremanagement grommet can bespecified on the hutch back panel,with an $15.00 list upcharge to allowfor task light cord routing behind thehutch.
ShipmentMost Magnusson products areshipped knock-down in easy toassemble components. Four positioncredenzas, wall mount overheads andVDT corners ship fully assembled.Returns, bridge worksurfaces andhutches require in-field attachment.
NoteThe information in this price listrepresents the latest availableinformation at the time ofpublication. Knoll reserves the rightto make changes to Magnussonwithout notice.
Knoll Office Tables
101
Mag
nuss
on
Magnusson Finish Options
Wood Finishes:V1 Techwood Closed Pore
Y316 MapleY319 CherryY323 Medium WalnutY326 Dark MahoganyY327 Light OakY329 Medium OakY344 EspressoY851 Black OakY811 NaturalY821 Blond MapleY831 Light Cherry
V2 Natural VeneerClosed Pore
V316 MapleV415 Peacock Green WalnutV436 Medium Brown Cherry(all above V2’s are flat cut)
Fabric options
Grade 10Bailey II (W359)**Broadcloth (W288)Foundation (W351)Growth Spurt (W692)Newbury (W812)**Solid Crepe (W257)**Symbolic Detail (W693)Tailor Made (W133)Versatility (W432)
Grade 15Regency (W210)
Grade 20Banyan (W443)Bauhaus Block (W296A)Clarity (W281)Criss Cross (W305)Devon (W809)Labyrinth (W352)Melbourne (W228)Outback (W229)Reflect (W884)Resolution (W280)Walkabout (W230)Weave Three (W298)
Grade 30Basket Draft (W249)Flow (W565)Harmony (W232)Interknit (W1090)Micro (W465) *Progression (W403)Promenade (W913)Raku Cloth (W566)Relay (W1020)
Grade 35Saxony Plus (S)
Grade 40Palladium (W1030)Sennit (W337)Sierra (R)Spinoff Nuance (W319)
Grade 45Casual Elegance (W920)Dristi (K872) *
* with backing only** not available in all colors
Painted leg finishes
613 Silver Metallic113 Dark Grey
Knoll Office Tables
102
Meeting tables
descriptionoverallw dia. h pattern no. V1 V2
36�D Round meeting table with 3 slanted mastlegs, included
36� 281/2� NTMT 36 ( ) $1,234. $1,283.
42�D Round meeting table with 4 slanted mastlegs, included
42� 281/2� NTMT 42 ( ) 1,438. 1,494.
48�D Round meeting table with 4 slanted mastlegs, included
48� 281/2� NTMT 48 ( ) 1,645. 1,712.
Grommet (Qty. = 1) Specify after dimensions inpattern no.)
NG 15.
Order Code
Example: NTMT 36DV311 113
NT MagnussonMT Meeting table36 36� diameterD Downtown edgeV311 Beech finish113 Dark grey finish
(on mast legs)
Specification Information
Specify:1. Pattern number2. Edge option
(D) Downtown3. Finish code4. Leg finish
Leg Finishes:613 Silver Metallic113 Dark grey
Grommets:Black rectangular center grommetoptional for round meeting table, at$15 list upcharge. Two grommetsoptional on racetrack conferencetable at $33 list upcharge. Locatedcentered on radius at each end.Specify ‘‘G’’ after dimensions inpattern no.
Assembly required.
Mast legs:Feature vertical cable managementaccess via recessed routing on eachleg.
Knoll Office Tables
103
Mag
nuss
on
Conference tables
descriptionoverallw d h pattern no. V1 V2
72�W x 36�D Racetrack conference table with 4slanted mast legs, included
72� 36� 281/2� NTCT 7236 ( ) $2,259. $2,351.
84�W x 42�D Racetrack conference table with 4slanted mast legs, included
84� 42� 281/2� NTCT 8442 ( ) 2,467. 2,566.
96�W x 48� Racetrack conference table with 4slanted mast legs, included
96� 48� 281/2� NTCT 9648 ( ) 2,672. 2,778.
Grommet (QTY. = 2) Specify after dimensions inpattern no.
NG 33. 33.
Order Code
Example: NTCT 7236DV311 113
NT MagnussonCT Conference table72 Length36 WidthD Downtown edgeV311 Beech finish113 Dark grey finish (on
mast legs)
Specification Information
Specify:1. Pattern number2. Edge
(D) Downtown3. Finish code4. Leg finish
Leg Finishes:613 Silver Metallic113 Dary grey
Grommets:Black rectangular center grommetoptional for round meeting table, at$15 list upcharge. Two grommetsoptional on racetrack conferencetable at $33 list upcharge. Locatedcentered on radius at each end.Specify ‘‘G’’ after dimensions inpattern no.
Assembly required.
Mast legs:Feature vertical cable managementaccess via recessed routing on eachleg.
Knoll Office Tables
104
Interaction Base Optionsperformance overview
Four Star Base■ Designed for round, teardrop, blunted round, roundedsquare and square top shapes.
■ Available in fixed height, fixed height with lockingcasters, and adjustable versions.
■ Fixed height base is 285/8� high with top.
■ Adjustable base provides 5� of adjustment of top tomatch height of existing worksurfaces.
■ Locking casters can be retrofitted, and add 11/2� toheight.
■ Available separately on page 168.
Fixed Height Adjustable
Column Base■ Overall height is 28� with standard Interaction7/8� top.
■ Designed for Amoeba, Bat, and Large round(60� diameter) tops.
■ Locking casters can be retrofitted, and increase height11/2�. See page 169.
■ Available separately on page 168.
Fixed Base■ 281/2� overall height.
■ Available split-top mechanism adjusts 7� above and53/4� below main surface, and tilts +9°/−15°.
■ Legs include integral vertical wire managers.
■ Crossbeam is designed for cable storage, and includesremovable black PVC cable flap.
■ Locking casters can be retrofitted, and increase tableheight 11/2�. See Accessories, page 169.
Manually Adjustable Base■ 261/2� - 291/2� height range, on 1/2� increments.
■ Available split-top mechanism adjusts 7.5� above and4.5� below main surface, and tilts +/−15°.
■ Legs include integral vertical wire manager.
■ Crossbeam is designed for cable storage, and includesremovable black PVC cable flap.
■ Locking casters can be retrofitted, and increase tableheight range 11/2�. See Accessories, page 169.
Manually Adjustable
Knoll Office Tables
105
Inte
ract
ion
Interaction Base Optionsperformance overview
Crank Adjustable Base■ 231/2� - 35� height adjustment range.
■ Available split-top mechanism adjusts 7.5� above and 4.5� below main surface, andtilts +/−15°.
■ 300 lb. load capacity.
■ Five turns of the handle adjust worksurface one inch.
■ Handle folds beneath worksurface when not in use, and has soft rubber grip.
■ Legs include integral vertical wire manager.
■ Locking casters can be retrofitted, and increase table height range 11/2�. SeeAccessories, page 169.
Crank Adjustable
Counterforce Base■ Counterforce provides rapid sit-to-stand adjustment, in a 26� - 41� range.
■ Available split-top mechanism adjusts 7.5� above and 4.5� below main surface, andtilts +/−15°.
■ 80 - 120 lb. load capacity (depending on top size and configuration)
■ Hand paddle actuates the vertical adjustment mechanism.
■ Safety interlock prevents inadvertent height change.
■ Legs include integral vertical wire manager.
■ Locking casters can be retrofitted, and increase table height range 11/2�. SeeAccessories, page 169.
Counterforce
Top Crank Adjustable Base■ 271/4� - 431/4� height adjustment range.
■ Available split-top mechanism adjusts 7.5� above and 4.5� below main surface, andtilts +/−15°.
■ 200 lb. load capacity.
■ Five turns of the handle adjust worksurface one inch.
■ Handle is removable and stores beneath worksurface when not in use.
■ Legs include integral vertical wire manager.
■ Locking casters can be retrofitted, and increase table height range 11/2�. SeeAccessories, page 169.
Top Crank Adjustable
Electric Adjustable Base■ Electric adjustable base provides sit-to-stand adjustment, in a 271/4� - 431/4� range.
■ Available split-top mechanism adjusts 7.5� above and 4.5� below main surface, andtilts +/−15°.
■ 200 lb. load capacity
■ Rocker switch actuates the vertical adjustment mechanism.
■ Legs include integral vertical wire manager.
■ Locking casters can be retrofitted, and increase table height range 11/2�. SeeAccessories, page 169.
Electric Adjustable
Knoll Office Tables
106
Interaction Table Planningschematic plan viewsScale =1/4�-1’0
INTERACTION TOP TABLESFour Star Base Round Blunted Round Teardrop
Rounded Square Square
C-Leg Base Hot Dog Small Boomerang Large Boomerang
Corner Counterforce Split Top Counterforce
Knoll Office Tables
107
Inte
ract
ion
Interaction Table Planningschematic plan viewsScale =1/4�-1’0
Columns Base and T-Leg
Amoeba Bat Large Round Racetrack
40"
C-Leg Tables with Morrison,Equity, Reff, and Dividends Tops
Straight Corner Split-Top
Split-Top Corner
Knoll Office Tables
108
Interaction Table Planningschematic plan viewsScale =1/4�-1’0
INTERACTION TOP TABLESFour Star Base Fixed Height Adjustable Column Base
"
Adjustability Ranges
Manually Adjustable Counterforce Crank Adjustable Split Top
Top Crank Adjustable Electric Adjustable
Knoll Office Tables
109
Inte
ract
ion
Interaction Table Planningschematic plan viewsScale =1/4�-1’0
C-Leg and T-Leg Tables for Morrison, Equity, Reff, and Dividends
End View
Fixed Height Manually Adjustable Crank Adjustable Counterforce T-Leg
Inside View
Outside View
Knoll Office Tables
110
Ordering Interaction Tables
This price list provides you with theproduct information you need tospecify and order Interaction Tables.
Interaction Tables are a completecollection of portable and adjustablework and meeting tables. Interactiontables are appropriate for open planworkstations and private offices,conference areas and team spaces,cafeterias and training areas.
Interaction Tables may be plannedalone, or in combination with KnollMorrison, Equity, Reff or DividendsHorizon office systems.
Top options include original 7/8� thickInteraction tops, 11/4� Morrison tops,11/4� Equity and Dividends tops,15/32� Reff tops, and 11/8� Cascadeedge tops. Base options include fixedor adjustable height four star, C-leg,T-leg, columns, Counterforce, andelectric adjustable tables.
How to Order Interaction Tables
Interaction Tables are specified bypattern numbers containing a logical,alphanumeric sequence describingthe top type, size, features, base, andfinish type of the table. Specificfinishes are listed as color fieldsfollowing the pattern number.
To specify a table consult the ordercode examples and application notesat the bottom of each page.
For example, to order an Interaction48� boomerang shape, adjustableheight table, in yellow laminate withblack edge, dark grey base, andyellow trim rings, specify: IT B4848AM; M12, EN, 113, T5
Details follow:I Interaction TableT Interaction topB Boomerang shape48 Width48 DepthA Adjustable baseM Plastic laminate
M12 Yellow topEN Black edge113 Dark grey baseT5 Yellow trim rings
To expedite correct entry of yourorder, be certain all catalog numbers,quantities, colors, and areaidentifications are completelyspecified. Also include completepurchase order numbers, bill-to andship-to addresses, a contact name,and specific shipping dates required.
Knoll, Inc.1235 Water StreetP.O. Box 157East Greenville, PA 18041Attention: Order Entry
Tel. 215 679-7991Fax 215 679-1788
Once your order is entered at Knoll,an acknowledgment will be mailedwithin five days of the originalacknowledgment. If it is necessary torevise your order, please contact yourCustomer Service representative.
PRODUCT SPECIFICATIONS
Tops
Interaction, 7/8� thickPlastic laminate or veneer surface on3/4� medium density fiberboard; vinylT-mold edge.
Interaction split top and cornerCounterforce table tops have 2�radius at all corners.
Morrison System, 11/4� thickPlastic laminate or veneer surface on11/8� particle board, with balancedconstruction backer. Front and backedges of rectangular laminate topsare post-formed, with a 9/32� radius attop and bottom. Front and backedges of other laminate tops arematching radius T-mold. Side edgesof Morrison laminate tops areself-edge laminate. Front and backedges of veneer tops are solid 3/16�veneer with 3/16� radius top andbottom; side edges are veneer.
Equity, 11/4� thickPlastic laminate on 11/8� particleboard, with laminate backer. Alledges have 2mm PVC edgeband orT-mold extrusion.
Reff System, 15/32� thickPlastic laminate or veneer surface on11/8� particle board with balancedconstruction backer. Edges of plasticlaminate tops are matching solidcolor-core PVC with 2.8 mm radiustop and bottom.
Veneer tops have veneer edge with2.4 mm radii.
Dividends Horizon, 11/4� thickPlastic laminate with laminatebacker. All edges have 2mm PVCedgeband or T-mold extrusion.
Cascade Edge, 11/8� thickPlease Note: Cascade Edgeworksurfaces are wrapped with avinyl sheet that is heated andpressed around an MDF substrate.Vinyl is more susceptible to denting,impact, tearing and marring thanconventional high pressure laminateand should be handled with care. Donot drag worksurfaces across anyflooring surface. Treat Cascade Edgeworksurfaces like veneerworksurfaces for optimumperformance under normalconditions. Cascade Edgeworksurfaces come with a 5 yearwarranty that covers defects inworkmanship and materials. Thiswarranty does not cover damageoccurring during or after installation.
Bases
Four star or column baseDie-cast aluminum base, 33/4�diameter 14-gauge steel tube, withpowder epoxy finish. Trim ring isABS plastic.
Base diameters for 30� or 36� roundare 28�; for 42� or 48� round are 32�;for columns are 5�.
C-Leg or T-Leg baseDie cast aluminum feet, extrudedaluminum vertical legs, and14-gauge steel crossbeam, withpowder epoxy finish. Tops aresupported by 14-gauge, formed steelcantilevers, with color-integralpolystyrene end caps. Each legincludes black, dual-durometer,extruded PVC wire manager, andpolystyrene trim ring. Crossbeamincludes removable black PVC cableflap. (Does not apply to top crankand electric adjustable bases)
Counterforce baseCrossbeam is 11-gauge steelweldment, containing avariable-output spring-actuatedmechanism that will counterbalanceup to 155 lbs. (including top).Hand-paddle actuates the verticallocking mechanism; safety interlockprevents inadvertent height change.Large gear pulley and spiral aremineral-filled acetyl. Springs are5-gauge chrome silicon alloy steelwire.
Glides and CastersGlides are 2� diameter nylon, with3/4� steel stems and optional 1/2� highnylon glide extenders. Lockingcasters are nylon with 1/2� steelstems. Casters can be retrofitted inthe field.
Casters may replace glides on anyInteraction table, and raise top 11/2�.See page 169.
Weight Loads
Interaction Tables exceedANSI/BIFMA standards forworksurface loads: 4.5 lbs per linearinch (functional load) or 10 lbs perlinear inch (proof load) except forCounterforce tables. Counterforcetable bases support a maximum loadof 150 lbs. including the weight ofthe worksurface, (example: weight ofworksurface plus weight of objects ontable must not total more than 150lbs. if placed on a Counterforcebase).
Note to Knoll Dealer Sellers:
The products contained in this pricelist are also available through theKnoll Essentials program, withlimited exceptions. For additionalinformation, please contact yourcustomer service representative orvisit Knoll Exchange.
Knoll Office Tables
111
Inte
ract
ion
Interaction Core Finishes
Interaction, Morrison, Equity, Reffand Dividends Horizon TablesTops:
Solid laminate:111 Jet Black114 Folkstone Grey (was LA)117 Soft Grey (was M42)118 Bright White119 Pumice (was LF)121 Micro Grey (comes with 114
Folkstone grey edge only onReff tables)
122 Brushed Sand (comes with 119Pumice edge only on Refftables)
123 Brushed Grey (comes with 128Fog edge only on Reff tables)
128 Fog129 Micro Sand (comes with 119
Pumice edge only on Refftables)
Woodgrain laminate:124 Medium Cherry (not available
on Reff tables)125 Natural Maple (not available
on Reff tables)126 Natural Cherry (not available
on Reff tables)127 Walnut (not available on Reff
tables)
Top Edges:111 Jet Black113 Dark Grey (was Y3)114 Folkstone Grey (was LA)115 Medium Grey (was Y2)117 Soft Grey (was E)118 Bright White119 Pumice (was LF)124 Medium Cherry (not available
on Interaction or Reff tables)125 Natural Maple (not available
on Interaction or Reff tables)126 Natural Cherry (not available
on Interaction or Reff tables)127 Walnut (not available on
Interaction or Reff tables)128 Fog
Note: Edge finish not optional onReff tables; matches surface unlessnoted differently above.
Bases:113 Dark Grey (was Y3)115 Medium Grey (was Y2)117 Soft Grey (was E)
Trim Rings:T1 BlackT2 BlueT3 GreenT4 RedT5 Yellow
Core laminate color options areidentical for Type L, Type M andType P laminates. For Legacylaminates, Type L refers to Morrisonlegacy laminates, Type M refers toEquity and Dividends legacylaminates, and Type P refers to Refflegacy laminates.
V1 Techwood Closed PoreY811 Natural (Legacy: VT)Y821 Blonde Maple (Legacy: V4
Maple)Y831 Light Cherry (Legacy: V6
Cherry)Y316 MapleY319 CherryY323 Medium WalnutY326 Dark MahoganyY327 Light OakY329 Medium OakY341 WengeY342 Medium TeakY343 Dark Grey OakY344 EspressoY851 Black Oak
V2 Natural Veneer Closed PoreV312 Bronzed CherryV316 Maple (Legacy: VK)V411 Light WalnutV415 Peacock Green WalnutV417 Old English WalnutV418 Smoked WalnutV421 Chalk OakV423 Light OakV425 Amber OakV427 Brown OakV433 Light Fawn CherryV436 Medium Brown CherryV439 Straight Anigre
In October, 2009 all Morrisonveneer finishes were transferredfrom our East Greenville Plant toour Toronto Plant. All veneerfinishes were changed to closedpore finishing and assigned newfinish codes.
This price list contains pricing forCore finishes. Core finishes includesome Morrison veneer finishesformally referred to as Techgrain(cross-referenced above) as well asnumerous new veneer finishes nowavailable on Morrison. For detailedpricing of Legacy finishes, pleaserefer to the latest release of CAPworksheet or contact your customerservices representative.
*Patterned laminates (Micro, Brushed and woodgrain laminates) are available on Morrison rectangular tables only.
Knoll Office Tables
112
Interaction Legacy Finishes
Note: Specify Legacy finishes tomatch existing product only.Legacy finishes are not availablefor new customers.
Interaction Top TablesTops:Type L Plastic LaminatesLN Black
Type M Plastic LaminatesM1 Light greyM12 YellowM15 BlueM33 Red
Interaction tops may also bespecified in any standard Morrison,Equity, Dividends or Reff laminate orveneer listed on this page.
Top Edges:EN BlackEL Light greyEG Medium grey
Note: EG Medium Grey edgematches LG Medium Grey laminate.(Y2) Medium Grey base finishmatches Dividends Medium Greyand Equity Medium Grey (Y2) paint.EG Medium Grey edge does notmatch the (Y2) Medium Grey basefinish.
Trim Rings:T1 BlackT2 BlueT3 GreenT4 RedT5 Yellow
Morrison Top TablesTops:Type L Plastic LaminatesLL Light greyLG Medium greyLD SandLB Snow
Legacy Veneer Finishes
Veneer Group 1C6F3 Medium Brown
Mahogany (Legacy: V7)C6F4 Medium Red
Mahogany (Legacy: V8)C6F5 American Cherry
Techgrain (Legacy: V9)
Veneer Group 2:C6F6 American Cherry
(Legacy: VX)C6F7 Medium Red Mahogany
(Legacy: VZ)
Trim Rings:T1 BlackT2 BlueT3 GreenT4 RedT5 Yellow
Equity Top TablesTops:Type M Plastic LaminatesM1 Light greyM5 Dark neutralM80 TaupeM89 Medium grey (Slate)M95 Grey graniteM96 Rose graniteMP70 Light oakMP58 Dark mahoganyM2 Soft whiteMR6 Winter grey matrixES7 White essencePA PearwoodMC Caramel mapleCM Clear mapleSD SandB SnowWM Warm cherry
2mm Top Edges:Y2 Medium grey (Slate)D Dark neutralR TaupeY3 Dark greySD SandB SnowCM Clear MapleMC Caramel MapleWM Warm CherryMT Metal
Trim Rings:T1 BlackT2 BlueT3 GreenT4 RedT5 Yellow
Reff Top TablesTops:Type P Plastic LaminatesPLC Oyster greyPLD Charcoal greyPLE Willow grey
Trim Rings:T1 BlackT2 BlueT3 GreenT4 RedT5 Yellow
Dividends Top Tables
Top Laminates:MR6 Winter grey matrixCM Clear maplePA PearwoodMC Caramel mapleWM Warm cherrySD SandM1 Light grey
Top Edges:Y1 PewterY2 Medium greyY3 Dark greySD SandB SnowCM Clear MapleMC Caramel MapleWM Warm CherryMT Metal
Trim Rings:T1 BlackT2 BlueT3 GreenT4 RedT5 Yellow
Note: Add 10% to the list price of any laminate product when specifying a legacy laminate
Knoll Office Tables
113
Inte
ract
ion
Four-star base, fixed and adjustable heightInteraction topsround, blunted round and teardrop
description type w d h pattern no.laminate
M/L/P V1 V2
Round table Fixed height 30� 285/8� IT R3000 X( ) $694. $1,115. $1,298.36� 285/8� IT R3600 X( )( ) 780. 1,253. 1,460.42� 285/8� IT R4200 X( )( ) 939. 1,526. 1,776.48� 285/8� IT R4800 X( ) 1,083. 1,798. 2,095.
Fixed height with casters 30� 285/8� IT R3000 W( ) 729. 1,152. 1,333.36� 285/8� IT R3600 W( ) 787. 1,289. 1,494.42� 285/8� IT R4200 W( ) 976. 1,562. 1,811.
Adjustable 30� 25� - 30� IT R3000 Y( ) 983. 1,405. 1,588.36� 25� - 30� IT R3600 Y( ) 1,070. 1,542. 1,747.42� 25� - 30� IT R4200 Y( ) 1,228. 1,816. 2,063.48� 25� - 30� IT R4800 Y( ) 1,375. 2,087. 2,384.
Blunted round table Fixed height 36� 24� 285/8� IT D3624 X( ) 854. 1,389. 1,613.42� 30� 285/8� IT D4230 X( ) 1,022. 1,663. 1,935.
Fixed height with casters 36� 24� 285/8� IT D3624 W( ) 891. 1,425. 1,648.42� 30� 285/8� IT D4230 W( ) 1,059. 1,700. 1,970.
Adjustable 36� 24� 25� - 30� IT D3624 Y( ) 1,179. 1,679. 1,902.42� 30� 25� - 30� IT D4230 Y( ) 1,349. 1,953. 2,222.
Order Code
Example: IT T3618 XL; 117, 117,117, T2
I Interaction TableT Interaction topT Teardrop36 Diameter18 Depth of returnX Base typeL Top type117 Top finish117 Top edge finish117 Base finishT2 Trim ring
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Specify top types:L Type L laminatesM Type M laminatesP Type P laminatesV Group V1 or V2 veneers
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Note: All veneer Interaction topscome standard with black edge.
Application Notes
Four-star base tables may be usedinteractively in panel-based orfreestanding planning any Knollsystem. Tops are7/8� thick, withT-mold edge.
Fixed height four-star base tablesare 285/8�H. Adjustable tables maybe manually adjusted for any topheight from 25� - 30� using a hexwrench.
Glides permit 1/2� leveling. Castersfor adjustable tables must bespecified separately (seeAccessories, p. 169).
Adjustable tables are designedprimarily to match height ofpanel-supported worksurfaces.
Knoll Office Tables
114
Four-star base, fixed and adjustable heightInteraction topsround, blunted round and teardrop
description type w d h pattern no.laminate
M/L/P V1 V2
Teardrop table Fixed height 36� 18� 285/8� IT T3618 X( ) $854. $1,389. $1,613.42� 21� 285/8� IT T4221 X( ) 1,022. 1,663. 1,935.
Fixed height with casters 36� 18� 285/8� IT T3618 W( ) 891. 1,425. 1,648.42� 21� 285/8� IT T4221 W( ) 1,059. 1,700. 1,970.
Adjustable 36� 18� 25� - 30� IT T3618 Y( ) 1,144. 1,679. 1,902.42� 21� 25� - 30� IT T4221 Y( ) 1,310. 1,953. 2,222.
Order Code
Example: IT T3618 XL; 117, 117,117, T2
I Interaction TableT Interaction topT Teardrop36 Diameter18 Depth of returnX Base typeL Top type117 Top finish117 Top edge finish117 Base finishT2 Trim ring
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Specify top types:L Type L laminatesM Type M laminatesP Type P laminatesV Group V1 or V2 veneers
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Note: All veneer Interaction topscome standard with black edge.
Application Notes
Four-star base tables may be usedinteractively in panel-based orfreestanding planning any Knollsystem. Tops are7/8� thick, withT-mold edge.
Fixed height four-star base tablesare 285/8�H. Adjustable tables maybe manually adjusted for any topheight from 25� - 30� using a hexwrench.
Glides permit 1/2� leveling. Castersfor adjustable tables must bespecified separately (seeAccessories, p. 169).
Adjustable tables are designedprimarily to match height ofpanel-supported worksurfaces.
Knoll Office Tables
115
Inte
ract
ion
Four-star base, fixed and adjustable heightInteraction topssquare and rounded square
description type w d h pattern no.laminate
M/L/P V1 V2
Square table Fixed height 30� 30� 285/8� IT E3030 X( ) $780. $1,255. $1,460.36� 36� 285/8� IT E3636 X( ) 854. 1,389. 1,613.42� 42� 285/8� IT E4242 X( ) 1,022. 1,663. 1,935.
Fixed height with casters 30� 30� 285/8� IT E3030 W( ) 816. 1,290. 1,494.36� 36� 285/8� IT E3636 W( ) 891. 1,425. 1,648.42� 42� 285/8� IT E4242 W( ) 1,059. 1,700. 1,970.
Rounded square table Adjustable 30� 30� 25� - 30� IT S3030 Y( ) 1,070. 1,546. 1,747.36� 36� 25� - 30� IT S3636 Y( ) 1,144. 1,679. 1,902.42� 42� 25� - 30� IT S4242 Y( ) 1,310. 1,953. 2,222.
Fixed height 30� 30� 285/8� IT S3030 X( ) 780. 1,255. 1,460.36� 36� 285/8� IT S3636 X( ) 854. 1,389. 1,613.42� 42� 285/8� IT S4242 X( ) 1,022. 1,663. 1,935.
Fixed height with casters 30� 30� 285/8� IT S3030 W( ) 816. 1,290. 1,494.36� 36� 285/8� IT S3636 W( ) 891. 1,425. 1,648.42� 42� 285/8� IT S4242 W( ) 1,059. 1,700. 1,970.
Order Code
Example: IT S3636XL;118,118,117,T1
I Interaction TableT Interaction topS Rounded square36 Width36 DepthX Base typeL Top type118 Top finish118 Top edge finish117 Base finishT1 Trim ring
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Specify top types:L Type L laminatesM Type M laminatesP Type P laminatesV Group V1 or V2 veneers
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Note: All veneer Interaction topscome standard with a black edge.
Application Notes
Four-star base tables may be usedinteractively in panel-based orfreestanding planning with anyKnoll system. Tops are7/8� thick,with T-mold edge.
Fixed height four-star base tablesare 285/8�H. Adjustable tables maybe manually adjusted for any topheight from 25� - 30� with a hexwrench.
Glides permit 1/2� leveling. Castersfor adjustable tables must bespecified separately (seeAccessories, p. 169).
Adjustable tables are designedprimarily to match height ofpanel-supported worksurfaces.
Knoll Office Tables
116
C-leg tables, fixed and adjustable height, linking topsInteraction tops
description type w d h pattern no.laminate
M/L/P V1 V2
Hot dog shape C-leg base table Fixed height 54� 24� 28� IT H5424 B ( ) $1,083. $1,573. $1,889.
Crank adjustable 54� 24� 227/8�- 341/2� IT H5424 D ( ) 2,345. 2,835. 3,151.
Manually adjustable 54� 24� 251/2�- 29� IT H5424 A ( ) 1,375. 1,863. 2,180.54� 24� 26�- 41� IT H5424 C ( ) 3,250. 3,741. 4,056.
Boomerang shape C-leg base table Fixed height 48� 48� 28� IT B4848 B ( ) 1,172. 1,672. 2,036.60� 60� 28� IT B6060 B ( ) 1,317. 1,876. 2,286.
Manually adjustable 48� 48� 251/2�- 29� IT B4848 A ( ) 1,462. 1,958. 2,326.60� 60� 251/2�- 29� IT B6060 A ( ) 1,603. 2,164. 2,576.
Crank adjustable 48� 48� 227/8�- 341/2� IT B4848 D ( ) 2,432. 2,932. 3,297.60� 60� 227/8�- 341/2� IT B6060 D ( ) 2,577. 3,138. 3,548.
Counterforce 48� 48� 26�- 41� IT B4848 C ( ) 3,337. 3,836. 4,204.60� 60� 26�- 41� IT B6060 C ( ) 3,483. 4,044. 4,455.
Order Code
Example: IT B4848 AL;119, 119,117, T1
I Interaction TableT Interaction topB Top shape48 Width48 DepthA Base typeL Top type119 Top finish119 Top edge finish117 Base finishT1 Trim ring
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Specify top types:L Type L laminatesM Type M laminatesP Type P laminatesV Group V1 or V2 veneers
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Base types:A AdjustableB Fixed heightC CounterforceD Crank
Note: All veneer Interaction topscome standard with a black edge.
Application Notes
C-leg tables may be usedinteractively in panel-based orfreestanding planning with anyKnoll system.
Manually adjustable height basemay be manually adjusted to allowtop height at any1/2� increment from251/2� to 29�. Fixed height tables are28�H.
The patented crank adjustmentmechanism easily lifts up to 300lbs of equipment. Five turns of thelow-profile folding handle raise orlower the top one inch, through a227/8� to 341/2� height range. Thehandle grip is soft textured rubberover steel. Handle may be specifiedright only on hot dog and boomerangtable.
Counterforce tables may be adjustedby user from 26� - 41�H, withouttools. Base may be adjusted tocounterbalance 0-90 lb. load.
All bases provide integral, lay-inwire management in legs andhorizontal beam. Glides permit 1/2�leveling.
Locking casters may be ordered toreplace glides. Casters raise topheight 11/2�. Stacking glideextenders raise top height in1/2�increments. (See Accessories, p.169).
Knoll Office Tables
117
Inte
ract
ion
C-leg tables, Counterforce™ corners and split-topsInteraction tops
description type w d h pattern no.laminate
M/L/P V1 V2
Curvilinear corner shape Counterforce 35� 23� 26� - 41� IT C3624C( ) $3,179. $3,641. $3,989.41� 23� 26� - 41� IT C4224C( ) 3,250. 3,729. 4,075.47� 23� 26� - 41� IT C4824C( ) 3,337. 3,836. 4,204.47� 29� 26� - 41� IT C4830C( ) 3,396. 3,900. 4,276.
Curvilinear corner split-top Counterforce 35� 23� 26� - 41� IT C36SSC( ) 4,335. 4,811. 5,159.41� 23� 26� - 41� IT C42SSC( ) 4,406. 4,886. 5,230.47� 23� 26� - 41� IT C48SSC( ) 4,495. 4,993. 5,358.47� 29� 26� - 41� IT C48DSC( ) 4,551. 5,057. 5,433.
Straight split-top for Morrison or Reff Counterforce 29� 29� 26� - 41� IT S30DSC( ) 3,973. 4,443. 4,785.35� 29� 26� - 41� IT S36DSC( ) 4,046. 4,524. 4,869.41� 29� 26� - 41� IT S42DSC( ) 4,118. 4,617. 4,979.47� 29� 26� - 41� IT S48DSC( ) 4,189. 4,696. 5,072.
Order Code
Example: IT C42SSCM; 117, 117,117, T1
I Interaction TableT Interaction topC Corner shape42 SizeS DepthS Split-topC Counterforce baseM Top type117 Top finish117 Top edge finish117 Base finishT1 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Specify top types:L Type L laminatesM Type M laminatesP Type P laminatesV Group V1 or V2 veneers
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Note: All veneer Interaction topscome standard with a black edge.
Application Notes
C-leg Counterforce tables may beplanned with any Knoll system toprovide high performanceadjustability.
Curvilinear corner shapes plan in36�, 42� or 48� VDT cornerapplications, with3/4� finger/cordclearance around table. Specify23�D for adjacent 24�Dworksurfaces, 29�D for adjacent30�D worksurfaces. Straight splittop fits in 30�, 36�, 42� or 48�W,30�D space in Morrison or Reffplanning, or 28�, 34�. 40�, or 46�space in Equity planning.
Counterforce tables may be adjustedby user from 26� - 41� high, withfingertip control. Base may beadjusted to counterbalance 0 - 80lb.load on split-top tables.
All bases provide integral, lay-inwire management in legs andhorizontal beam.
Locking casters may be ordered toreplace glides. Casters raise topheight range by 11/2�. (SeeAccessories, page 169).
Knoll Office Tables
118
C-leg tables, Counterforce™ corners and split-topsInteraction tops
description type w d h pattern no.laminate
M/L/P V1 V2
Straight split-top for Equity Counterforce 271/2� 29� 26� - 41� IT S3ODSCM $3,973. n/a n/a331/2� 29� 26� - 41� IT S36DSCM 4,046. n/a n/a391/2� 29� 26� - 41� IT S42DSCM 4,118. n/a n/a45� 29� 26� - 41� IT S48DSCM 4,189. n/a n/a
Order Code
Example: IT C42SSCM; 117, 117,117, T1
I Interaction TableT Interaction topC Corner shape42 SizeS DepthS Split-topC Counterforce baseM Top type117 Top finish117 Top edge finish117 Base finishT1 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Specify top types:L Type L laminatesM Type M laminatesP Type P laminatesV Group V1 or V2 veneers
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Note: All veneer Interaction topscome standard with a black edge.
Application Notes
C-leg Counterforce tables may beplanned with any Knoll system toprovide high performanceadjustability.
Curvilinear corner shapes plan in36�, 42� or 48� VDT cornerapplications, with3/4� finger/cordclearance around table. Specify23�D for adjacent 24�Dworksurfaces, 29�D for adjacent30�D worksurfaces. Straight splittop fits in 30�, 36�, 42� or 48�W,30�D space in Morrison or Reffplanning, or 28�, 34�. 40�, or 46�space in Equity planning.
Counterforce tables may be adjustedby user from 26� - 41� high, withfingertip control. Base may beadjusted to counterbalance 0 - 80lb.load on split-top tables.
All bases provide integral, lay-inwire management in legs andhorizontal beam.
Locking casters may be ordered toreplace glides. Casters raise topheight range by 11/2�. (SeeAccessories, page 169).
Knoll Office Tables
119
Inte
ract
ion
T-leg and column base tables, file topInteraction tops
description w d h pattern no.laminate
M/L/P V1 V2
Racetrack shape T-leg table 73� 37� 28� IT O7236 T( ) $1,214. $1,749. $2,099.85� 37� 28� IT O8436 T( ) 1,335. 1,923. 2,307.
Large round column base table – 60� 285/8� IT R6000 Z( ) 1,375. 1,965. 2,387.
Amoeba shape column base table 60� 60� 285/8� IT A6060 Z( ) 1,661. 2,374. 2,887.
Order Code
Example: IT A6060 ZM; 117, 177,117, T2
I InteractionT Interaction topA Amoeba60 Width60 DepthZ Columns baseM Top type117 Top finish117 Soft grey top edge117 Soft grey baseT2 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Specify top types:L Type L laminatesM Type M laminatesP Type P laminatesV Group V1 or V2 veneers
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Grommet Options:Add suffix G for racetrack largeround, amoeba, or bat shape tablewith center grommet, 3� diameter.
Note: All veneer Interaction topscome standard with a black edge.
Application Notes
Amoeba-shape column base table isideal for team workspaces. Amoebameasures 70� diagonally.
Bat-shape column base table worksinteractively with 36� diametertables. Actual dimension frominside curve to inside curve is 40�.
Specify glide extenders for bat whenaligning with fixed height roundtables.
T-leg and column-base tables arefixed at 28�H. Stacking glideextenders raise top height in1/2�increments. (See Accessories,p.169)
Racetrack-shape file top may beused to create file island with3-drawer lateral files. 72� racetrackmay be set on top of back-to-back36� wide files; 96� racetrack fitsabove cluster of four 30� wide files.
T-leg and column-base tables maybe used with any Knoll system.
Knoll Office Tables
120
T-leg and column base tables, file topInteraction tops
description w d h pattern no.laminate
M/L/P V1 V2
Bat shape column base table 48� 60� 285/8� IT A4860 Z( ) $1,661. $2,374. $2,887.
Racetrack shape file top (no base) 73� 37� 1� IT O7236 N( ) 615. 993. 1,310.97� 37� 1� IT O9636 N( ) 722. 1,152. 1,509.
Order Code
Example: IT A6060 ZM; 117, 177,117, T2
I InteractionT Interaction topA Amoeba60 Width60 DepthZ Columns baseM Top type117 Top finish117 Soft grey top edge117 Soft grey baseT2 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Specify top types:L Type L laminatesM Type M laminatesP Type P laminatesV Group V1 or V2 veneers
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Grommet Options:Add suffix G for racetrack largeround, amoeba, or bat shape tablewith center grommet, 3� diameter.
Note: All veneer Interaction topscome standard with a black edge.
Application Notes
Amoeba-shape column base table isideal for team workspaces. Amoebameasures 70� diagonally.
Bat-shape column base table worksinteractively with 36� diametertables. Actual dimension frominside curve to inside curve is 40�.
Specify glide extenders for bat whenaligning with fixed height roundtables.
T-leg and column-base tables arefixed at 28�H. Stacking glideextenders raise top height in1/2�increments. (See Accessories,p.169)
Racetrack-shape file top may beused to create file island with3-drawer lateral files. 72� racetrackmay be set on top of back-to-back36� wide files; 96� racetrack fitsabove cluster of four 30� wide files.
T-leg and column-base tables maybe used with any Knoll system.
Knoll Office Tables
121
Inte
ract
ion
Four-star base, fixed and adjustable heightMorrison topsround
description type w d h pattern no. laminate L veneer V1 V2
Round table Fixed height 30� 29� IN R3000 X( ) $912. $1,082. $1,246.36� 29� IN R3600 X( ) 938. 1,112. 1,279.42� 29� IN R4200 X( ) 993. 1,177. 1,357.48� 29� IN R4800 X( ) 1,201. 1,422. 1,641.
Fixed height with casters 30� 29� IN R3000 W( ) 940. 1,114. 1,284.36� 29� IN R3600 W( ) 965. 1,144. 1,318.42� 29� IN R4200 W( ) 1,020. 1,210. 1,392.
Adjustable 30� 251/4� - 301/4� IN R3000 Y( ) 1,230. 1,461. 1,680.36� 251/4� - 301/4� IN R3600 Y( ) 1,296. 1,533. 1,766.42� 251/4� - 301/4� IN R4200 Y( ) 1,378. 1,631. 1,881.48� 251/4� - 301/4� IN R4800 Y( ) 1,740. 2,062. 2,375.
Order Code
Example: IN R3600 XV; V9, 117,T2
I Interaction TableN Morrison topR Round36 DiameterX Base typeV Top typeV9 Top finish117 Base finishT2 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Specify top types:L Plastic laminatesV Veneer
Specify color fields:
Top finishBase finishTrim ring finish
Note: All veneer Morrison topscome with matching veneer edge.
Application Notes
Four-star base tables may be usedinteractively in panel-based orfreestanding planning any Knollsystem.
Fixed height four-star base tablesare 29�H. Adjustable tables may bemanually adjusted for any top heightfrom 251/4� - 301/4� using a hexwrench.
Glides permit 1/2� leveling. Castersfor adjustable tables must bespecified separately (seeAccessories, p. 169).
Adjustable tables are designedprimarily to match height ofpanel-supported worksurfaces.
Knoll Office Tables
122
C-leg tables, fixed heightMorrison tops
description w d h pattern no. laminate L veneer V1 V2
Rectangular fixed height table 30� 235/8� 283/8� IN S3024 B( ) $756. $948. $1,141.30� 295/8� 283/8� IN S3030 B( ) 819. 1,027. 1,230.36� 235/8� 283/8� IN S3624 B( ) 788. 987. 1,185.36� 295/8� 283/8� IN S3630 B( ) 849. 1,063. 1,276.42� 235/8� 283/8� IN S4224 B( ) 819. 1,027. 1,230.42� 295/8� 283/8� IN S4230 B( ) 880. 1,101. 1,322.48� 235/8� 283/8� IN S4824 B( ) 849. 1,063. 1,276.48� 295/8� 283/8� IN S4830 B( ) 910. 1,141. 1,365.60� 235/8� 283/8� IN S6024 B( ) 910. 1,141. 1,365.60� 295/8� 283/8� IN S6030 B( ) 971. 1,214. 1,460.
Curvilinear corner fixed height table 42� 235/8� 283/8� IN C4224 B( ) 1,153. 1,441. 1,729.48� 235/8� 283/8� IN C4824 B( ) 1,242. 1,553. 1,863.48� 295/8� 283/8� IN C4830 B( ) 1,315. 1,643. 1,971.
Order Code
Example: IN S4824 BL; 117, 117,T1
I Interaction TableN Morrison 11/4� topS Straight48 Width24 DepthB Base typeL Top type117 Top finish117 Base finishT1 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top typeSpecify top types:L Plastic laminateV Veneer
Specify color fields:Top finishBase finishTrim ring finish
Note: All veneer Morrison topscome with matching veneer edge.
Application Notes
Fixed height tables provideportable, independent surfaces inopen plan workstations or privateoffices.
Fixed height C-leg tables may beused interactively in panel-based orfreestanding Morrison planning,with tops to match 11/4�worksurfaces.
Table base provides integral, lay-inwire management in legs andhorizontal beam. Glides provide1/2�adjustment for leveling.
Stacking glide extenders raise topheight in1/2� increments.
Rectangular tables accommodate18�D suspended, floorstanding ormobile pedestals; 30�D tablesaccommodate 24�D pedestals.
Actual rectangular table widthsare3/16� less than nominal. Actualcorner table widths are1/2� less thannominal.
Knoll Office Tables
123
Mor
riso
nS
yste
mTo
pTa
bles
C-leg tables, manually adjustableMorrison tops
description w d h pattern no. laminate L veneer V1 V2
Rectangular manually adjustable table 30� 235/8� 26� - 291/2� IN S3024 A ( ) $1,048. $1,238. $1,430.30� 295/8� 26� - 291/2� IN S3030 A ( ) 1,109. 1,315. 1,521.36� 235/8� 26� - 291/2� IN S3624 A ( ) 1,077. 1,277. 1,471.36� 295/8� 26� - 291/2� IN S3630 A ( ) 1,141. 1,352. 1,563.42� 235/8� 26� - 291/2� IN S4224 A ( ) 1,109. 1,315. 1,521.42� 295/8� 26� - 291/2� IN S4230 A ( ) 1,171. 1,389. 1,610.48� 235/8� 26� - 291/2� IN S4824 A ( ) 1,141. 1,352. 1,563.48� 295/8� 26� - 291/2� IN S4830 A ( ) 1,201. 1,430. 1,654.60� 235/8� 26� - 291/2� IN S6024 A ( ) 1,201. 1,430. 1,654.60� 295/8� 26� - 291/2� IN S6030 A ( ) 1,259. 1,502. 1,747.
Curvilinear corner manually adjustable table 42� 235/8� 26� - 291/2� IN C4224 A ( ) 1,441. 1,731. 2,018.48� 235/8� 26� - 291/2� IN C4824 A ( ) 1,529. 1,840. 2,153.48� 295/8� 26� - 291/2� IN C4830 A ( ) 1,602. 1,931. 2,261.
Order Code
Example: IN S4830 AV; V9, 117,T4
I Interaction TableN Morrison 11/4� topS Rectangular48 Width30 DepthA Base typeV Top typeV9 Top finish117 Base finishT4 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Specify top type:L Plastic laminateV Veneer
Specify color fields:Top finishBase finishTrim ring finish
Note: All veneer Morrison topscome with matching veneer edge.
Application Notes
Manually adjustable tables provideportable, adjustable height surfacesin open plan workstations or privateoffices.
C-leg tables may be usedinteractively in panel-based orfreestanding Morrison planning,with tops to match 11/4�worksurfaces.
Table base may be manuallyadjusted to allow top height atany1/2� increment from 26� to 291/2�.Base provides integral, lay-in wiremanagement in legs and horizontalbeam. Glides permit 1/2� leveling.
Actual rectangular table widthsare3/16� less than nominal. Actualcorner table widths are1/2� less thannominal.
Locking casters may be ordered toreplace glides. Casters raise topheight range 11/2� (see Accessories,p. 169).
Knoll Office Tables
124
C-leg tables, crank adjustableMorrison tops
description w d h pattern no. laminate L veneer V1 V2
Rectangular adjustable table 30� 235/8� 231/4� - 35� IN S3024 D(R/L)( ) $2,019. $2,212. $2,401.30� 295/8� 231/4� - 35� IN S3030 D(R/L)( ) 2,081. 2,286. 2,493.36� 235/8� 231/4� - 35� IN S3624 D(R/L)( ) 2,050. 2,249. 2,445.36� 295/8� 231/4� - 35� IN S3630 D(R/L)( ) 2,110. 2,326. 2,537.42� 235/8� 231/4� - 35� IN S4224 D(R/L)( ) 2,081. 2,286. 2,493.42� 295/8� 231/4� - 35� IN S4230 D(R/L)( ) 2,141. 2,363. 2,583.48� 235/8� 231/4� - 35� IN S4824 D(R/L)( ) 2,110. 2,326. 2,537.48� 295/8� 231/4� - 35� IN S4830 D(R/L)( ) 2,174. 2,401. 2,628.60� 235/8� 231/4� - 35� IN S6024 D(R/L)( ) 2,174. 2,401. 2,628.60� 295/8� 231/4� - 35� IN S6030 D(R/L)( ) 2,232. 2,401. 2,628.
Curvilinear corner adjustable table 42� 235/8� 231/4� - 35� IN C4224 D( ) 2,415. 2,566. 2,991.48� 235/8� 231/4� - 35� IN C4824 D( ) 2,502. 2,815. 3,123.48� 295/8� 231/4� - 35� IN C4830 D( ) 2,576. 2,905. 3,234.
Order Code
Example: IN S4830 DRV; V9, 117,T4
I Interaction TableN Morrison 11/4� topS Rectangular48 Width30 DepthD Base typeR Right handle locationV Top typeV9 Top finish117 Base finishT4 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Handle location10. Top type
Specify top type:L Plastic laminateV Veneer
Handle location (rectangular only):R Right handL Left hand
Specify color fields:Top finishBase finishTrim ring finish
Note: All veneer Morrison topscome with matching veneer edge.
Application Notes
Crank adjustable tables providesimple, quick height adjustment fortoday’s heavy equipment loads, andcan be used in open planworkstations or private offices.
Crank adjustable C-leg tables maybe used interactively in panel-basedor freestanding Morrison planning,with tops to match 11/4�worksurfaces.
The hand crank adjustmentmechanism easily lifts up to 300lbs. of equipment. Five turns of thelow-profile folding crank handleraise or lower the top one inch,through a 231/4� to 35� height range.The handle grip is soft texturedrubber over steel. Handle may bespecified right or left on rectangulartables.
Actual rectangular table widths are1� less than nominal. Actual cornertable widths are 11/2� less thannominal. Glides permit 1/2� leveling.
Locking casters may be ordered toreplace glides. Casters raise topheight range 11/2� (see Accessories,p. 169).
Knoll Office Tables
125
Mor
riso
nS
yste
mTo
pTa
bles
C-leg tables, Counterforce™ adjustableMorrison tops
description w d h pattern no. laminate L veneer V1 V2
Rectangular counterbalanced table 29� 23� 26� - 41� IN S3024 C( ) $2,927. $3,116. $3,306.29� 29� 26� - 41� IN S3030C( ) 2,988. 3,192. 3,399.35� 23� 26� - 41� IN S3624 C( ) 2,957. 3,154. 3,350.35� 29� 26� - 41� IN S3630 C( ) 3,019. 3,232. 3,441.41� 23� 26� - 41� IN S4224 C( ) 2,988. 3,192. 3,399.41� 29� 26� - 41� IN S4230 C( ) 3,048. 3,268. 3,488.47� 23� 26� - 41� IN S4824 C( ) 3,019. 3,232. 3,441.47� 29� 26� - 41� IN S4830 C( ) 3,080. 3,306. 3,533.59� 23� 26� - 41� IN S6024 C( ) 3,080. 3,306. 3,533.59� 29� 26� - 41 IN S6030 C( ) 3,139. 3,380. 3,624.
Order Code
Example: IN S4824 CL; 117, 117,T2
I Interaction TableN Morrison 11/4� topS Rectangular48 Width24 Depth of returnC Base typeL Top type117 Top finish117 Base finishT2 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Specify top type:L Plastic laminateV Veneer
Specify color fields:Top finishBase finishTrim ring finish
Note: All veneer Morrison topscome with matching veneer edge.
Application Notes
Adjustable height Counterforce™-leg tables may be usedinteractively in panel-based orfreestanding Morrison planning,with tops to match 11/4�worksurfaces.
Fingertip control allows user toadjust from seated- to standing-workheight (26�-41�) without tools oreffort. Counterforce tables may beadjusted by the user to balanceloads of 0-90 lbs.
Note:24�D rectangular Counterforcetables provide only 16�D clearkneespace inside 12�H crossbeam,12� above the floor. ANSI/BIFMArecommends minimum 15�Dkneespace, increasing on a diagonalto 23�D at toe height.
Actual rectangular table widthsare3/16� less than nominal. Forcorner Counterforce applications,see page 118.
Knoll Office Tables
126
T-leg tablesMorrison tops
description w d h pattern no. laminate L veneer V1 V2
Straight table 48� 295/8� 283/8� IN S4830T ( ) $910. $1,141. $1,365.48� 355/8� 283/8� IN S4836T ( ) 971. 1,214. 1,460.60� 295/8� 283/8� IN S6030T ( ) 971. 1,214. 1,460.60� 355/8� 283/8� IN S6036T ( ) 1,048. 1,306. 1,640.72� 295/8� 283/8� IN S7230T ( ) 1,048. 1,306. 1,640.72� 355/8� 283/8� IN S7236T ( ) 1,100. 1,370. 1,721.
Rounded end table 63� 30� 283/8� IN U6330T ( ) 1,276. 1,595. 1,912.66� 36� 283/8� IN U6636T ( ) 1,365. 1,708. 2,049.75� 30� 283/8� IN U7530T ( ) 1,365. 1,708. 2,049.78� 36� 28 3/8 IN U7836T ( ) 1,460. 1,820. 2,185.
Order Code
Example: IN U6330TL; 117, 117,T1
I Interaction TableN Morrison 11/4� topU Rounded end63 Width30 DepthT Base typeL Top type117 Top finish117 Base finishT1 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Specify top type:L Plastic laminateV Veneer
Specify color fields:Top finishBase finishTrim ring finish
Note: All veneer Morrison topscome with matching veneer edge.
Application Notes
T-leg tables provide shared meetingand work surfaces in conjunctionwith Morrison System or otherInteraction tables. Tops are standarddetail Morrison 11/4�.
T-leg base tables are fixed at283/8�H. Tables may be increased inheight in1/2� increments byspecifying extender glides (seeAccessories, p. 169).
Knoll Office Tables
127
Mor
riso
nS
yste
mTo
pTa
bles
C-leg tables, split topMorrison tops
description type w d h pattern no. laminate L veneer V1 V2
Split-top straight table Fixed height 35� 295/8� 283/8� IN S36DS B( ) $2,006. $2,218. $2,431.41� 295/8� 283/8� IN S42DS B( ) 2,038. 2,256. 2,476.47� 295/8� 283/8� IN S48DS B( ) 2,068. 2,297. 2,524.
Manually adjustable 35� 295/8� 26� - 291/2� IN S36DS A( ) 2,297. 2,506. 2,719.41� 295/8� 26� - 291/2� IN S42DS A( ) 2,327. 2,544. 2,766.47� 295/8� 26� - 291/2� IN S48DS A( ) 2,358. 2,584. 2,811.
Crank adjustable 35� 295/8� 231/4� - 35� IN S36DS D( ) 3,268. 3,475. 3,692.41� 295/8� 231/4� - 35� IN S42DS D( ) 3,298. 3,517. 3,739.47� 295/8� 231/4� - 35� IN S48DS D( ) 3,330. 3,556. 3,782.
Split-top corner table Fixed height 47� 235/8� 283/8� IN C48SS B( ) 2,399. 2,709. 3,020.47� 295/8� 283/8� IN C48DS B( ) 2,469. 2,798. 3,125.
Manually adjustable 47� 235/8� 26� - 291/2� IN C48SS A( ) 2,687. 2,995. 3,307.47� 295/8� 26� - 291/2� IN C48DS A( ) 2,759. 3,086. 3,416.
Crank adjustable 47� 235/8� 231/4� - 35� IN C48SS D( ) 3,658. 3,968. 4,196.47� 295/8� 231/4� - 35� IN C48DS D( ) 3,731. 4,058. 4,388.
Order Code
Example: IN S36DS AL; 117, 117,T2
I Interaction TableN Morrison 11/4� topS Straight36 WidthD 30� DeepS Split-topA Base typeL Top type117 Top finish117 Base finishT2 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top typeBase types:A AdjustableB Fixed heightD CrankSpecify top types:L Plastic laminateV Veneer
Specify color fields:Trim ring finishTop finishBase finish
Note: All veneer Morrison topscome with matching veneer edge.
Application Notes
Split-top C-leg tables provide easy,infinite adjustability of full width,keyboard-and-mouse surface.Split-top adjustable height C-legtables may be used interactively inpanel-based or freestandingMorrison planning, with tops tomatch 11/4� worksurfaces.
Fingertip control allows user toadjust front surface for keyboardand mouse from 5 1/2� above to 6 1/2�below rear surface. Front surfacemay also be adjusted −/+15°.
Adjustable table base may bemanually adjusted to allow rear topheight at any1/2� increment from 26�to 291/2�. Fixed height table basefixes rear worksurface at 283/8�H.
Knoll’s patented crank adjustmentmechanism easily lifts up to 300lbs. of equipment. Five turns of thelow-profile folding crank handleraise or lower the top one inch,through a 231/4� to 35� height range.The handle grip is soft texturedrubber over steel. Handle is locatedin front center of rear surface.
Glides permit 1/2� leveling. Castersraise heights 11/2�. For Counterforcesplit-top applications, see page 118.
Knoll Office Tables
128
C-leg tables, top crank adjustableMorrison tops
description w d h pattern no. laminate L veneer V1 V2
Rectangular adjustable table 30� 24� 271/4� - 431/4� IN S3024 K( ) $1,646. $1,803. $1,958.30� 30� 271/4� - 431/4� IN S3030 K( ) 1,697. 1,864. 2,033.36� 24� 271/4� - 431/4� IN S3624 K( ) 1,672. 1,835. 1,994.36� 30� 271/4� - 431/4� IN S3630 K( ) 1,721. 1,895. 2,069.42� 24� 271/4� - 431/4� IN S4224 K( ) 1,697. 1,864. 2,033.42� 30� 271/4� - 431/4� IN S4230 K( ) 1,747. 1,925. 2,106.48� 24� 271/4� - 431/4� IN S4824 K( ) 1,721. 1,895. 2,069.48� 30� 271/4� - 431/4� IN S4830 K( ) 1,771. 1,958. 2,141.60� 24� 271/4� - 431/4� IN S6024 K( ) 1,771. 1,958. 2,141.60� 30� 271/4� - 431/4� IN S6030 K( ) 1,820. 1,958. 2,103.
Curvilinear corner adjustable table 42� 24� 271/4� - 431/4� IN C4224 K( ) 1,969. 2,091. 2,440.48� 24� 271/4� - 431/4� IN C4824 K( ) 2,042. 2,294. 2,547.48� 30� 271/4� - 431/4� IN C4830 K( ) 2,100. 2,369. 2,636.
Rect. Split-top adj., top crank 36� 30� 271/4� - 431/4� IN S36DS K( ) 2,664. 2,834. 3,012.42� 30� 271/4� - 431/4� IN S42DS K( ) 2,690. 2,867. 3,048.48� 30� 271/4� - 431/4� IN S48DS K( ) 2,715. 2,901. 3,085.
Curv. corner split-top adj., top crank table 47� 235/8� 26� - 42� IN C48SS K( ) 2,984. 3,236. 3,421.47� 295/8� 26� - 42� IN C48DS K( ) 3,043. 3,309. 3,578.
Order Code
Example: IN S4830 K;L, 117, 117
I Interaction TableN Morrison 11/4� topS Rectangular48 Width30 DepthK Base typeL Top type117 Top finish117 Base finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Base types:K Top crank
Specify top types:L Plastic laminateV Veneer
Specify color fields:Top finishBase finish
Note: All veneer Morrison topscome with matching veneer edge.
Locking casters may be ordered toreplace glides. Casters raise topheight range 11/2�.
Application Notes
Crank adjustable tables providesimple, quick height adjustment fortoday’s heavy equipment loads, andcan be used in open planworkstations or private offices.
Crank adjustable C-leg tables maybe used interactively in panel-basedor freestanding Morrison planning,with tops to match 11/4�worksurfaces.
The hand crank adjustmentmechanism easily lifts up to 200pounds. Five turns of the crankhandle raise or lower the top oneinch, through a 27 1/4� to 43 1/4�height range. The handle grip is softtextured rubber over steel.
Rectangular table widths are 2� lessthan nominal while depths are 1�less than nominal. Corner tablewidths are 2� less than nominal.Glides permit 1/2� leveling.
Knoll Office Tables
129
Mor
riso
nS
yste
mTo
pTa
bles
C-leg tables, electric adjustableMorrison tops
description w d h pattern no. laminate L veneer V1 V2
Rectangular electric adj. table 30� 24� 271/4� - 431/4� IN S3024 E( ) $2,386. $2,541. $2,696.30� 30� 271/4� - 431/4� IN S3030 E( ) 2,435. 2,604. 2,771.36� 24� 271/4� - 431/4� IN S3624 E( ) 2,410. 2,573. 2,731.36� 30� 271/4� - 431/4� IN S3630 E( ) 2,461. 2,635. 2,805.42� 24� 271/4� - 431/4� IN S4224 E( ) 2,435. 2,604. 2,771.42� 30� 271/4� - 431/4� IN S4230 E( ) 2,485. 2,664. 2,845.48� 24� 271/4� - 431/4� IN S4824 E( ) 2,461. 2,635. 2,805.48� 30� 271/4� - 431/4� IN S4830 E( ) 2,510. 2,696. 2,880.60� 24� 271/4� - 431/4� IN S6024 E( ) 2,510. 2,696. 2,880.60� 30� 271/4� - 431/4� IN S6030 E( ) 2,559. 2,756. 2,956.
Curvilinear corner electric adj. table 36� 24� 271/4� - 431/4� IN C3624 E( ) 2,592. 2,853. 3,112.42� 24� 271/4� - 431/4� IN C4224 E( ) 2,651. 2,922. 3,180.48� 24� 271/4� - 431/4� IN C4824 E( ) 2,722. 3,004. 3,276.48� 30� 271/4� - 431/4� IN C4830 E( ) 2,769. 3,062. 3,348.
Curv. corner split-top electric adj. table 48� 24� 271/4� - 431/4� IN C48SS E( ) 3,663. 3,945. 4,218.48� 30� 271/4� - 431/4� IN C48DS E( ) 3,709. 4,003. 4,289.
Order Code
Example: IN S4830 EL; 117, 117
I Interaction TableN Morrison 11/4� topS Rectangular48 Width30 DepthE Base typeL Top type117 Top finish117 Base finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Base types:E Electric
Specify top types:L Plastic laminateV Veneer
Specify color fields:Top finishBase finish
Note: All veneer Morrison topscome with matching veneer edge.
Application Notes
Electric adjustable tables providesimple, quick height adjustment fortoday’s heavy equipment loads, andcan be used in open planworkstations or private offices.
Electric adjustable C-leg tables maybe used interactively in panel-basedor freestanding Morrison planning,with tops to match 11/4�worksurfaces.
The electric adjustment mechanismeasily lifts up to 200 pounds.Mechanism adjusts up or down at arate of one inch per second througha 27 1/4� to 43 1/4� height range.Up/down control may be locatednearly anywhere on the underside ofthe table for either left handed orright handed operation.
Rectangular table widths are 2� lessthan actual while depth is 1� lessthan actual for safety. Corner tablewidths are 2� less than nominal.Glides permit 1/2� leveling.
Knoll Office Tables
130
Four-star base, fixed and adjustable heightEquity tops 2mm edge and 24mm waterfall edgeround
description type w d h pattern no.solid
PVC edgewoodgrainPVC edge
metaledge
Round table2mm edge
Fixed height 30� 29� IE R3000 X2 $912. $945. $978.36� 29� IE R3600 X2 938. 983. 1,002.42� 29� IE R4200 X2 993. 1,027. 1,059.48� 29� IE R4800 X2 1,201. 1,234. 1,267.
Fixed height with casters 30� 29� IE R3000 W2 940. 972. 1,006.36� 29� IE R3600 W2 965. 997. 1,030.42� 29� IE R4200 W2 1,020. 1,054. 1,085.
Adjustable 30� 251/4� - 301/4� IE R3000 Y2 1,230. 1,264. 1,297.36� 251/4� - 301/4� IE R3600 Y2 1,296. 1,327. 1,359.42� 251/4� - 301/4� IE R4200 Y2 1,378. 1,409. 1,441.48� 251/4� - 301/4� IE R4800 Y2 1,740. 1,774. 1,806.
Order Code
Example: IE R3600 X3; 117, 117,117, T1
I Interaction TableE Equity topR Round36 DiameterX Base type117 Top finish117 Edge finish117 Base finishT1 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Application Notes
Four-star base tables may be usedinteractively in panel-based orfreestanding planning any Knollsystem.
Fixed height four-star base tablesare 29�H. Adjustable tables may bemanually adjusted for any top heightfrom 251/4� - 301/4� using a hexwrench.
Glides permit 1/2� leveling. Castersfor adjustable tables must bespecified separately (seeAccessories, p. 169).
Adjustable tables are designedprimarily to match height ofpanel-supported worksurfaces.
Note: Y2 in the pattern number forthe adjustable table refers to Y(base type) and 2 (edge finish),not Y2 Medium Grey.
Knoll Office Tables
131
Equ
ityS
yste
mTo
pTa
bles
Four-star base, fixed and adjustable heightEquity tops 2mm edge and 24mm waterfall edgeround
description type w d h pattern no.solid
PVC edgewoodgrainPVC edge
metaledge
Round table24mm waterfall edge
Fixed height 30� 29� IE R3000 X3 $1,090.36� 29� IE R3600 X3 1,148.42� 29� IE R4200 X3 1,204.48� 29� IE R4800 X3 1,460.
Fixed height with casters 30� 29� IE R3000 W3 1,116.36� 29� IE R3600 W3 1,176.42� 29� IE R4200 W3 1,230.
Adjustable 30� 251/4� - 301/4� IE R3000 Y3 1,445.36� 251/4� - 301/4� IE R3600 Y3 1,505.42� 251/4� - 301/4� IE R4200 Y3 1,588.48� 251/4� - 301/4� IE R4800 Y3 1,997.
Order Code
Example: IE R3600 X3; 117, 117,117, T1
I Interaction TableE Equity topR Round36 DiameterX Base type117 Top finish117 Edge finish117 Base finishT1 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Application Notes
Four-star base tables may be usedinteractively in panel-based orfreestanding planning any Knollsystem.
Fixed height four-star base tablesare 29�H. Adjustable tables may bemanually adjusted for any top heightfrom 251/4� - 301/4� using a hexwrench.
Glides permit 1/2� leveling. Castersfor adjustable tables must bespecified separately (seeAccessories, p. 169).
Adjustable tables are designedprimarily to match height ofpanel-supported worksurfaces.
Note: Y2 in the pattern number forthe adjustable table refers to Y(base type) and 2 (edge finish),not Y2 Medium Grey.
Knoll Office Tables
132
C-leg tables, fixed heightEquity tops
description w d h pattern no.solid
PVC edgewoodgrainPVC edge
metaledge
Straight fixed height table 281/2� 231/2� 283/8� IE S3024 B2 $756. $789. $823.281/2� 291/2� 283/8� IE S3030 B2 819. 852. 884.341/2� 231/2� 283/8� IE S3624 B2 788. 821. 854.341/2� 291/2� 283/8� IE S3630 B2 849. 882. 913.401/2� 231/2� 283/8� IE S4224 B2 819. 852. 884.401/2� 291/2� 283/8� IE S4230 B2 880. 912. 945.461/2� 231/2� 283/8� IE S4824 B2 849. 882. 913.461/2� 291/2� 283/8� IE S4830 B2 910. 942. 976.581/2� 231/2� 283/8� IE S6024 B2 910. 942. 976.581/2� 291/2� 283/8� IE S6030 B2 971. 1,003. 1,036.701/2� 231/2� 283/8� IE S7224 B2 971. 1,003. 1,036.701/2� 291/2� 283/8� IE S7230 B2 1,032. 1,065. 1,098.
Curvilinear corner fixed height table 411/2� 231/2� 283/8� IE C4224 B2 1,153. 1,187. 1,219.471/2� 231/2� 283/8� IE C4824 B2 1,242. 1,275. 1,307.471/2� 291/2� 283/8� IE C4830 B2 1,315. 1,349. 1,381.
Order Code
Example: IE S3624 B2; 117, 117,117, T1
I Interaction TableE Equity 11/4� topS Straight36 Width24 DepthB2 Fixed Height, 2mm top
edge117 Top finish117 Edge finish117 Base finishT1 Trim ring finish
SpecificationInformation
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Application Notes
Fixed height tables provideportability in open planworkstations or private offices.
Fixed height C-leg tables may beused interactively in panel-basedEquity planning.
Panel-mounted worksurfacesadjacent to curvilinear corner tablesmust be cantilevered, or desk endpanel supported.
Table base provides integral, lay-inwire management in legs andhorizontal beam. Glides provide1/2�adjustment for leveling.
Specify extender glides (see p. 169)for alignment with Equitypanel-mounted worksurfaces.
Rectangular tables accommodate18�D suspended floorstanding ormobile Equity pedestals; 30�Dtables accommodate 24�Dpedestals. Specify extender glidesfor tables with floorstandingpedestals.
Knoll Office Tables
133
Equ
ityS
yste
mTo
pTa
bles
C-leg tables, manually adjustableEquity tops
description w d h pattern no.solid
PVC edgewoodgrainPVC edge
metaledge
Straight manually adjustable table 281/2� 231/2� 26�- 291/2� IE S3024 A2 $1,048. $1,080. $1,113.281/2� 291/2� 26�- 291/2� IE S3030 A2 1,109. 1,142. 1,174.341/2� 231/2� 26�- 291/2� IE S3624 A2 1,077. 1,111. 1,143.341/2� 291/2� 26�- 291/2� IE S3630 A2 1,141. 1,173. 1,204.401/2� 231/2� 26�- 291/2� IE S4224 A2 1,109. 1,142. 1,174.401/2� 291/2� 26�- 291/2� IE S4230 A2 1,171. 1,202. 1,235.461/2� 231/2� 26�- 291/2� IE S4824 A2 1,141. 1,173. 1,204.461/2� 291/2� 26�- 291/2� IE S4830 A2 1,201. 1,234. 1,267.581/2� 231/2� 26�- 291/2� IE S6024 A2 1,201. 1,234. 1,267.581/2� 291/2� 26�- 291/2� IE S6030 A2 1,259. 1,292. 1,324.701/2� 231/2� 26�- 291/2� IE S7224 A2 1,259. 1,292. 1,324.701/2� 291/2� 26�- 291/2� IE S7230 A2 1,322. 1,354. 1,386.
Curvilinear corner manually adjustable table 411/2� 231/2� 26�- 291/2� IE C4224 A2 1,441. 1,473. 1,505.471/2� 231/2� 26�- 291/2� IE C4824 A2 1,529. 1,562. 1,595.471/2� 291/2� 26�- 291/2� IE C4830 A2 1,602. 1,635. 1,668.
Order Code
Example: IE C4830 A2; 117, 117,117, T1
I Interaction TableE Equity 11/4� topC Curvilinear48 Width30 DepthA2 Adjustable, 2mm top
edge117 Top finish117 Edge finish117 Base finishT1 Trim ring
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Application Notes
Manually adjustable height tablesprovide portable, adjustablesurfaces in open plan workstationsor private offices.
Manually adjustable height C legtables may be used interactively inpanel-based Equity planning.
Panel-mounted worksurfacesadjacent to curvilinear corner tablesmust be cantilevered, or desk endpanel supported.
Table base may be manuallyadjusted to allow top height atany1/2� increment from 26� to 291/2�.Base provides integral, lay-in wiremanagement in legs and horizontalbeam. Glides permit 1/2� leveling.
Locking casters may be ordered toreplace glides. Casters raise topheight 11/2�. (See Accessories,p. 169)
Knoll Office Tables
134
C-leg tables, crank adjustableEquity tops
description w d h pattern no.solid
PVC edgewoodgrainPVC edge
metaledge
Straight crank adjustable table 281/2� 231/2� 231/4�- 35� IE S3024 D(R/L)2 $1,992. $2,024. $2,056.281/2� 291/2� 231/4�- 35� IE S3030 D(R/L)2 2,081. 2,114. 2,146.341/2� 231/2� 231/4�- 35� IE S3624 D(R/L)2 2,050. 2,082. 2,115.341/2� 291/2� 231/4�- 35� IE S3630 D(R/L)2 2,110. 2,143. 2,178.401/2� 231/2� 231/4�- 35� IE S4224 D(R/L)2 2,068. 2,100. 2,132.401/2� 291/2� 231/4�- 35� IE S4230 D(R/L)2 2,141. 2,175. 2,209.461/2� 231/2� 231/4�- 35� IE S4824 D(R/L)2 2,110. 2,143. 2,178.461/2� 291/2� 231/4�- 35� IE S4830 D(R/L)2 2,174. 2,208. 2,240.581/2� 231/2� 231/4�- 35� IE S6024 D(R/L)2 2,174. 2,208. 2,240.581/2� 291/2� 231/4�- 35� IE S6030 D(R/L)2 2,232. 2,266. 2,298.
Curvilinear corner crank adjustable table 411/2� 231/2� 231/4�- 35� IE C4224 D2 2,415. 2,447. 2,479.471/2� 231/2� 231/4�- 35� IE C4824 D2 2,502. 2,535. 2,568.471/2� 291/2� 231/4�- 35� IE C4830 D2 2,574. 2,606. 2,638.
Order Code
Example: IE C4830 D2; 117, 117,117, T1
I Interaction TableE Equity 11/4� topC Curvilinear48 Width30 DepthD Crank adjustable2 2mm top edge117 Top finish117 Edge finish117 Base finishT1 Trim ring finish
Pattern number logic:
1. Interaction table2. System top3. Top shape4-7. Top size8. Base type
Handle location (rectangular only):
R Right handL Left hand
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Application Notes
Crank adjustable tables providesimple, quick height adjustment fortoday’s heavy equipment loads, andcan be used in open planworkstations or private offices.
Crank adjustable C leg tables maybe used interactively in panel-basedEquity planning.
Knoll’s patented crank adjustmentmechanism easily lifts up to 300lbs. of equipment. Five turns of thelow-profile folding crank handleraise or lower the top one inch,through a 231/2� to 35� height range.The handle grip is soft texturedrubber over steel. Handle may bespecified right or left on rectangulartables.
Actual rectangular table widthsare3/16� less than nominal. Actualcorner table widths are1/2� less thannominal. Glides permit 1/2� leveling.
Locking casters may be ordered toreplace glides. Casters raise topheight range 11/2� (see Accessories,p. 169).
Knoll Office Tables
135
Equ
ityS
yste
mTo
pTa
bles
C-leg tables, Counterforce™ adjustableEquity tops
description w d h pattern no.solid
PVC edgewoodgrainPVC edge
metaledge
Straight counterforce table 271/2� 23� 26� - 41� IE S3024 C2 $2,927. $2,959. $2,991.271/2� 29� 26� - 41� IE S3030 C2 2,988. 3,020. 3,052.331/2� 23� 26� - 41� IE S3624 C2 2,957. 2,989. 3,021.331/2� 29� 26� - 41� IE S3630 C2 3,019. 3,050. 3,083.391/2� 23� 26� - 41� IE S4224 C2 2,988. 3,020. 3,052.391/2� 29� 26� - 41� IE S4230 C2 3,048. 3,081. 3,113.451/2� 23� 26� - 41� IE S4824 C2 3,019. 3,050. 3,083.451/2� 29� 26� - 41� IE S4830 C2 3,080. 3,112. 3,144.571/2� 23� 26� - 41� IE S6024 C2 3,080. 3,112. 3,144.571/2� 29� 26� - 41� IE S6030 C2 3,139. 3,170. 3,203.
Order Code
Example: IE S4830 C2; 117, 117,117, T1
I Interaction TableE Equity 11/4� topS Top shape48 Width30 DepthC2 Base type, 2mm top edge117 Top finish117 Edge finish117 Base finishT1 Trim ring
Specifiation Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Application Notes
Adjustable height Counterforce™C-leg tables may be usedinteractively in panel-based Equityplanning.
Fingertip control allows user toadjust from seated to standing-workheight (26� - 41�) without tools oreffort. Counterforce tables may beadjusted by the user tocounterbalance loads of 0-90 lbs.
Worksurfaces adjacent tocurvilinear corner tables must becantilevered not desk endpanel-supported.
Table base provides integral, lay-inwire management in legs andhorizontal beam. Glides provide1/2�adjustment for leveling.
Note:24�D Counterforce tables provideonly 16� clear kneespace inside the121/4� cross-beam, 12� above thefloor. ANSI/BIFMA recommendsminimum 19�D kneespace,increasing to 23�D at toe height.
For corner Counterforceapplications, see page 118.
Knoll Office Tables
136
T-leg tablesEquity tops
description w d h pattern no.solid
PVC edgewoodgrainPVC edge
metaledge
Straight table 461/2� 291/2� 283/8� IE S4830 T2 $910. $942. $976.461/2� 351/2� 283/8� IE S4836 T2 971. 1,003. 1,036.581/2� 291/2� 283/8� IE S6030 T2 971. 1,003. 1,036.581/2� 351/2� 283/8� IE S6036 T2 1,048. 1,080. 1,113.701/2� 291/2� 283/8� IE S7230 T2 1,048. 1,080. 1,113.701/2� 351/2� 283/8� IE S7236 T2 1,100. 1,134. 1,166.
Rounded end table 63� 30� 283/8� IE U6330 T2 1,276. 1,308. 1,341.66� 36� 283/8� IE U6636 T2 1,365. 1,398. 1,432.75� 30� 283/8� IE U7530 T2 1,365. 1,398. 1,432.78� 36� 283/8� IE U7836 T2 1,460. 1,491. 1,523.
Order Code
Example: IE U7530 T2; 117, 117,117, T1
I Interaction TableE Equity topU Rounded end75 Width30 DepthT2 Base type, 2mm top edge117 Top finish117 Base finish117 Top edge finishT1 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Application Notes
T-leg tables provide shared meetingor worksurfaces in conjunction withEquity or other Interaction tables.
T-leg base tables are fixed at283/8�H. Stacking glide extendersmay be specified to increase tableheight in1/2� increments. (SeeAccessories, p. 169)
Knoll Office Tables
137
Equ
ityS
yste
mTo
pTa
bles
C-leg tables, split-topEquity tops
description type w d h pattern no.solid
PVC edgewoodgrainPVC edge
metaledge
Split-top straight table Fixed height 331/2� 291/2� 283/8� IE S36DS B2 $2,006. $2,040. $2,072.451/2� 291/2� 283/8� IE S48DS B2 2,068. 2,100. 2,132.
Manually adjustable 331/2� 291/2� 26� - 291/2� IE S36DS A2 2,297. 2,329. 2,362.451/2� 291/2� 26� - 291/2� IE S48DS A2 2,358. 2,390. 2,422.
Crank adjustable 331/2� 291/2� 231/2�- 35� IE S36DS D2 3,268. 3,299. 3,332.451/2� 291/2� 231/2�- 35� IE S48DS D2 3,330. 3,362. 3,394.
Split-top curvilinear corner table Fixed height 47� 231/2� 283/8� IE C48SS B2 2,399. 2,430. 2,462.47� 291/2� 283/8� IE C48DS B2 2,469. 2,501. 2,534.
Manually adjustable 47� 231/2� 26� - 291/2� IE C48SS A2 2,687. 2,718. 2,750.47� 291/2� 26� - 291/2� IE C48DS A2 2,759. 2,792. 2,824.
Crank adjustable 47� 231/2� 231/2�- 35� IE C48SS D2 3,658. 3,690. 3,723.47� 291/2� 231/2�- 35� IE C48DS D2 3,731. 3,765. 3,797.
Order Code
Example: IE S36DS A2; 117, 117,117, T1
I Interaction TableE Equity 11/4� topS Straight36 WidthD DepthS Split topA2 Base type, 2mm top edge117 Top finish117 Top edge finish117 Base finishT1 Trim ring
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type
Specify Color fields:Top finishTop edge finishBase finishTrim ring finish
Application Notes
Split-top tables provide easy,infinite adjustability of full width,keyboard-and-mouse surface.Split-top adjustable height C-legtables may be used interactively inpanel-based Equity planning.
Fingertip control allows user toadjust front surface for keyboardand mouse from 5 1/2� above to 6 1/2�below rear surface. Front surfacemay also be adjusted +/-15°.
Adjustable table base may bemanually adjusted to allow rear topheight at any1/2� increment from 26�to 291/2�. Fixed height table basefixes rear worksurface at 283/8�H.
Knoll’s patented crank adjustmentmechanism easily lifts up to 300lbs. of equipment. Five turns of thelow-profile folding crank handleraise or lower the top one inch,through a 231/2� to 35� height range.The handle grip is soft texturedrubber over steel. For split toptables, handle is located in frontcenter of rear worksurface.
Glides permit 1/2� leveling. Castersraise heights 11/2�. For Counterforcesplit-top applications, see page 169.
Knoll Office Tables
138
C-leg tables, top crank adjustableEquity tops
description w d h pattern no.solid
PVC edgewoodgrainPVC edge
metaledge
Straight crank adjustable table 30� 24� 271/4� - 431/4� IE S3024 K2 $1,625. $1,650. $1,678.30� 30� 271/4� - 431/4� IE S3030 K2 1,697. 1,723. 1,750.36� 24� 271/4� - 431/4� IE S3624 K2 1,672. 1,698. 1,724.36� 30� 271/4� - 431/4� IE S3630 K2 1,721. 1,748. 1,775.42� 24� 271/4� - 431/4� IE S4224 K2 1,685. 1,712. 1,739.42� 30� 271/4� - 431/4� IE S4230 K2 1,747. 1,774. 1,801.48� 24� 271/4� - 431/4� IE S4824 K2 1,721. 1,748. 1,775.48� 30� 271/4� - 431/4� IE S4830 K2 1,771. 1,800. 1,825.60� 24� 271/4� - 431/4� IE S6024 K2 1,771. 1,800. 1,825.60� 30� 271/4� - 431/4� IE S6030 K2 1,820. 1,846. 1,874.
Curvilinear corner crank adjustable table 42� 24� 271/4� - 431/4� IE C4224 K2 1,969. 1,996. 2,021.48� 24� 271/4� - 431/4� IE C4824 K2 2,042. 2,068. 2,095.48� 30� 271/4� - 431/4� IE C4830 K2 2,098. 2,125. 2,151.
Straight split-top crank adjustable table 42� 30� 271/4� - 431/4� IE S42DS K2 2,664. 2,691. 2,718.48� 30� 271/4� - 431/4� IE S48DS K2 2,715. 2,742. 2,769.
Curv. corner split-top crank adj. table 48� 24� 271/4� - 431/4� IE C48SS K2 2,984. 3,011. 3,037.48� 30� 271/4� - 431/4� IE C48DS K2 3,043. 3,069. 3,094.
Order Code
Example: IE C4830 K2; 117, 117,117
I Interaction TableE Equity 11/4� topC Curvilinear48 Width30 DepthK Top crank adjustable2 2mm top edge117 Top finish117 Edge finish117 Base finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type
Specify color fields:Top finishTop edge finishBase finish
Application Notes
Crank adjustable tables providesimple, quick height adjustment fortoday’s heavy equipment loads, andcan be used in open planworkstations or private offices.
The hand crank adjustmentmechanism easily lifts up to 200pounds. Five turns of the crankhandle raise or lower the top oneinch, through a 27 1/4� to 43 1/4�height range. The handle grip issoft textured rubber over steel.
Equity rectangular table widths are31/2� less than nominal (11/2� less forcenterline planning rule and 1� lesson either side for safety) whiledepths are 1� less than nominal forsafety. Corner table widths are 2�less than nominal. Glides permit 1/2�leveling.
Locking casters may be ordered toreplace glides. Casters raise topheight range 11/2�.
Knoll Office Tables
139
Equ
ityS
yste
mTo
pTa
bles
C-leg tables, electric adjustableEquity tops
description w d h pattern no.solid
PVC edgewoodgrainPVC edge
metaledge
Straight electric adjustable table 30� 24� 271/4� - 431/4� IE S3024 E2 $2,386. $2,413. $2,440.30� 30� 271/4� - 431/4� IE S3030 E2 2,435. 2,462. 2,488.36� 24� 271/4� - 431/4� IE S3624 E2 2,410. 2,436. 2,464.36� 30� 271/4� - 431/4� IE S3630 E2 2,461. 2,487. 2,513.42� 24� 271/4� - 431/4� IE S4224 E2 2,435. 2,462. 2,488.42� 30� 271/4� - 431/4� IE S4230 E2 2,485. 2,511. 2,539.48� 24� 271/4� - 431/4� IE S4824 E2 2,461. 2,487. 2,513.48� 30� 271/4� - 431/4� IE S4830 E2 2,510. 2,538. 2,565.60� 24� 271/4� - 431/4� IE S6024 E2 2,510. 2,538. 2,565.60� 30� 271/4� - 431/4� IE S6030 E2 2,559. 2,585. 2,610.
Curvilinear corner electric adjustable table 36� 24� 271/4� - 431/4� IE C3624 E2 2,592. 2,641. 2,694.42� 24� 271/4� - 431/4� IE C4224 E2 2,651. 2,716. 2,781.48� 24� 271/4� - 431/4� IE C4824 E2 2,722. 2,800. 2,878.48� 30� 271/4� - 431/4� IE C4830 E2 2,769. 2,854. 2,940.
Curv. corner split-top electric adj. table 48� 24� 271/4� - 431/4� IE C48SS E2 3,663. 3,741. 3,819.48� 30� 271/4� - 431/4� IE C48DS E2 3,709. 3,795. 3,882.
Example: IE C4830 E2; 117, 117,117
I Interaction TableE Equity 11/4� topC Curvilinear48 Width30 DepthE Electric adjustable2 2mm top edge117 Top finish117 Edge finish117 Base finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type
Specify color fields:Top finishTop edge finishBase finish
Application Notes
Electric adjustable tables providesimple, quick height adjustment fortoday’s heavy equipment loads, andcan be used in open planworkstations or private offices.
The electric adjustment mechanismeasily lifts up to 200 pounds.Mechansim adjusts up or down at arate of one inch per second througha 27 1/4� to 43 1/4� height range.Up/down control may be locatednearly anywhere on the underside ofthe table for either left handed orright handed operation..
Equity rectangular table widths are31/2� less than normal (11/2� less forcenterline planning rule and 1� lesson either side for safety) whiledepths are 1� less than nominal forsafety. Corner table widths are 2�less than nominal. Glides permit 1/2�leveling.
Locking casters may be ordered toreplace glides. Casters raise topheight range 11/2�.
Knoll Office Tables
140
Four-star base, fixed and adjustable heightReff topsround
description type w d h pattern no.laminate
Pveneer
V1veneer
V2
Round table Fixed height 30� 29� IS R3000 X( ) $1,007. $1,255. $1,509.36� 29� IS R3600 X( ) 1,033. 1,287. 1,552.42� 29� IS R4200 X( ) 1,097. 1,364. 1,644.48� 29� IS R4800 X( ) 1,324. 1,650. 1,986.
Fixed height with casters 30� 29� IS R3000 W( ) 1,036. 1,292. 1,555.36� 29� IS R3600 W( ) 1,063. 1,326. 1,595.42� 29� IS R4200 W( ) 1,126. 1,403. 1,688.
Adjustable 30� 251/4� - 301/4� IS R3000 Y( ) 1,357. 1,690. 2,035.36� 251/4� - 301/4� IS R3600 Y( ) 1,429. 1,778. 2,139.42� 251/4� - 301/4� IS R4200 Y( ) 1,520. 1,892. 2,277.48� 251/4� - 301/4� IS R4800 Y( ) 1,920. 2,392. 2,878.
Order Code
Example: IS R3600 XP; 117, 117,T1
I Interaction TableS Reff System topR Round36 DiameterX Base typeP Top type117 Top finish117 Base finishT1 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Specify top types:P Type P laminatesV Veneer
Specify color fields:Top finishBase finishTrim ring finish
Application Notes
Four-star base tables may be usedinteractively in panel-based orfreestanding planning any Knollsystem.
Fixed height four-star base tablesare 285/8�H. Adjustable tables maybe manually adjusted for any topheight from 25� - 30� using a hexwrench.
Glides permit 1/2� leveling. Castersfor adjustable tables must bespecified separately (seeAccessories, p. 169).
Adjustable tables are designedprimarily to match height ofpanel-supported worksurfaces.
Knoll Office Tables
141
Ref
fS
yste
mTo
pTa
bles
C-leg tables, fixed heightReff tops
description w d h pattern no.laminate
Pveneer
V1veneer
V2
Rectangular fixed height table 30� 24� 281/4� IS S3024 B( ) $836. $1,042. $1,253.30� 30� 281/4� IS S3030 B( ) 902. 1,128. 1,353.36� 24� 281/4� IS S3624 B( ) 867. 1,083. 1,300.36� 30� 281/4� IS S3630 B( ) 935. 1,171. 1,402.42� 24� 281/4� IS S4224 B( ) 902. 1,128. 1,353.42� 30� 281/4� IS S4230 B( ) 969. 1,210. 1,454.48� 24� 281/4� IS S4824 B( ) 935. 1,171. 1,402.48� 30� 281/4� IS S4830 B( ) 1,002. 1,253. 1,502.60� 24� 281/4� IS S6024 B( ) 1,002. 1,253. 1,502.60� 30� 281/4� IS S6030 B( ) 1,065. 1,335. 1,602.
Curvilinear corner fixed height table 42� 24� 281/4� IS C4224 B( ) 1,271. 1,588. 1,904.48� 24� 281/4� IS C4824 B( ) 1,365. 1,707. 2,049.48� 30� 281/4� IS C4830 B( ) 1,444. 1,807. 2,167.
Order Code
Example: IS S4824 BP; 117, 117,T1
I Interaction TableS Reff System topS Straight48 Width24 DepthB Base typeP Top type117 Top finish117 Base finishT1 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Specify top type:P Plastic laminateV Veneer
Specify color fields:Top finishBase finishTrim ring finish
Application Notes
Fixed height tables provideportable, independent surfaces inopen plan workstations or privateoffices.
Fixed height C-leg tables may beused interactively in panel-based orfreestanding Reff Systems planning,with 15/32� tops.
Table base provides integral, lay-inwire management in legs andhorizontal beam. Glides provide1/2�adjustment for leveling.
Rectangular tables accommodate18�D suspended, floorstanding ormobile System 6 pedestals; 30�Dtables accommodate 24�Dpedestals.
Knoll Office Tables
142
C-leg tables, manually adjustableReff tops
description w d h pattern no.laminate
Pveneer
V1veneer
V2
Rectangular manually adjustable table 30� 24� 26�- 291/2� IS S3024 A( ) $1,125. $1,331. $1,542.30� 30� 26�- 291/2� IS S3030 A( ) 1,191. 1,417. 1,643.36� 24� 26�- 291/2� IS S3624 A( ) 1,156. 1,375. 1,590.36� 30� 26�- 291/2� IS S3630 A( ) 1,223. 1,461. 1,690.42� 24� 26�- 291/2� IS S4224 A( ) 1,191. 1,417. 1,643.42� 30� 26�- 291/2� IS S4230 A( ) 1,257. 1,499. 1,741.48� 24� 26�- 291/2� IS S4824 A( ) 1,223. 1,461. 1,690.48� 30� 26�- 291/2� IS S4830 A( ) 1,290. 1,542. 1,792.60� 24� 26�- 291/2� IS S6024 A( ) 1,285. 1,542. 1,792.60� 30� 26�- 291/2� IS S6030 A( ) 1,357. 1,624. 1,891.
Curvilinear corner manually adjustable table 42� 24� 26�- 291/2� IS C4224 A( ) 1,558. 1,876. 2,191.48� 24� 26�- 291/2� IS C4824 A( ) 1,654. 1,996. 2,338.48� 30� 26�- 291/2� IS C4830 A( ) 1,734. 2,096. 2,457.
Order Code
Example: IS S4830 AW; Y311,117, T1
I Interaction TableS Reff System topS Rectangular48 Width30 DepthA Base typeW Top typeY311 Top finish117 Base finishT1 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Top types:P Plastic laminateV Veneer
Specify color fields:Top finishBase finishTrim ring finish
Application Notes
Manually adjustable tables provideportable, adjustable surfaces inopen plan workstations or privateoffices. Manually adjustable C-legtables may be used interactively inpanel-based or freestanding ReffSystems planning, with 15/32� tops.
Table base may be manuallyadjusted to allow top height atany1/2� increment from 26� to 291/2�.Base provides integral, lay-in wiremanagement in legs and horizontalbeam. Glides permit 1/2� leveling.
Locking casters may be ordered toreplace glides. Casters raise topheight range 11/2� (see Accessories,p. 169).
Knoll Office Tables
143
Ref
fS
yste
mTo
pTa
bles
C-leg tables, crank adjustableReff tops
description w d h pattern no.laminate
Pveneer
V1veneer
V2
Rectangular crank adjustable table 30� 24� 23�- 35� IS S3024 D(L/R)( ) $2,098. $2,304. $2,514.30� 30� 23�- 35� IS S3030 D(L/R)( ) 2,163. 2,336. 2,374.36� 24� 23�- 35� IS S3624 D(L/R)( ) 2,129. 2,268. 2,561.36� 30� 23�- 35� IS S3630 D(L/R)( ) 2,195. 2,431. 2,657.42� 24� 23�- 35� IS S4224 D(L/R)( ) 2,163. 2,391. 2,615.42� 30� 23�- 35� IS S4230 D(L/R)( ) 2,229. 2,471. 2,720.48� 24� 23�- 35� IS S4824 D(L/R)( ) 2,195. 2,431. 2,657.48� 30� 23�- 35� IS S4830 D(L/R)( ) 2,265. 2,514. 2,765.60� 24� 23�- 35� IS S6024 D(L/R)( ) 2,257. 2,514. 2,765.60� 30� 23�- 35� IS S6030 D(L/R)( ) 2,330. 2,596. 2,863.
Curvilinear corner crank adjustable table 42� 24� 23�- 35� IS C4224 D( ) 2,531. 2,848. 2,886.48� 24� 23�- 35� IS C4824 D( ) 2,628. 2,967. 3,032.48� 30� 23�- 35� IS C4830 D( ) 2,707. 3,067. 3,430.
Order Code
Example: IS S4830 DLW; Y311,117, T1
I Interaction TableS Reff System topS Rectangular48 Width30 DepthD Base typeL Left handle locationW Top typeY311 Top finish117 Base finishT1 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Handle location10. Top type
Handle location (rectangular only):R Right handL Left hand
Top types:P Plastic laminateV Veneer
Specify color fields:Top finishBase finishTrim ring finish
Application Notes
Crank adjustable tables providesimple, quick height adjustment fortoday’s heavy equipment loads, andcan be used in open planworkstations or private offices.
Tables may be used interactively inpanel-based or freestanding ReffSystems planning, with 15/32� tops.
Knoll’s patented crank adjustmentmechanism easily lifts up to 300lbs. of equipment. Five turns of thelow-profile folding crank handleraise or lower the top one inch,through a 231/2� to 35� height range.The handle grip is soft texturedrubber over steel. Handle may bespecified right on rectangulartables.
Actual rectangular table widths are1� less than nominal. Actual cornertable widths are1/2� less thannominal. Glides permit 1/2� leveling.
Locking casters may be ordered toreplace glides. Casters raise topheight range 11/2� (see Accessories,p. 169).
Knoll Office Tables
144
C-leg tables, Counterforce™ adjustableReff tops
description w d h pattern no.laminate
Pveneer
V1veneer
V2
Rectangular Counterforce table 29� 231/2� 26� - 41� IS S3024 C( ) $3,002. $3,209. $3,419.29� 291/2� 26� - 41� IS S3030 C( ) 3,068. 3,296. 3,520.35� 231/2� 26� - 41� IS S3624 C( ) 3,033. 3,250. 3,468.35� 291/2� 26� - 41� IS S3630 C( ) 3,104. 3,336. 3,569.41� 231/2� 26� - 41� IS S4224 C( ) 3,068. 3,296. 3,520.41� 291/2� 26� - 41� IS S4230 C( ) 3,137. 3,377. 3,621.47� 231/2� 26� - 41� IS S4824 C( ) 3,104. 3,336. 3,569.47� 291/2� 26� - 41� IS S4830 C( ) 3,169. 3,419. 3,670.59� 231/2� 26� - 41� IS S6024 C( ) 3,169. 3,419. 3,670.59� 291/2� 26� - 41� IS S6030 C( ) 3,236. 3,502. 3,772.
Order Code
Example: IS S4824 CP; 117, 117,T4
I Interaction TableS Reff System topS Straight48 Width24 Depth of returnC Base typeP Top type117 Top finish117 Base finishT4 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Specify top type:P Plastic laminateV Veneer
Specify color fields:Top finishBase finishTrim ring finish
Application Notes
Adjustable height Counterforce™C-leg tables may be usedinteractively in panel-based orfreestanding Reff Systems planning,with 15/32� tops.
Fingertip control allows user toadjust from seated- to standing-work height (26�-41�) without toolsor effort. Counterforce tables may beadjusted by the user to balanceloads of 0-90 lbs.
For corner Counterforceapplications, see page 118.
Knoll Office Tables
145
Ref
fS
yste
mTo
pTa
bles
T-leg tablesReff tops
description w d h pattern no.laminate
Pveneer
V1veneer
V2
Straight table 48� 295/8� 281/4� IS S4830 T( ) $1,002. $1,253. $1,502.48� 355/8� 281/4� IS S4836 T( ) 1,069. 1,335. 1,602.60� 295/8� 281/4� IS S6030 T( ) 1,069. 1,335. 1,602.60� 355/8� 281/4� IS S6036 T( ) 1,153. 1,435. 1,801.72� 295/8� 281/4� IS S7230 T( ) 1,153. 1,435. 1,801.72� 355/8� 281/4� IS S7236 T( ) 1,211. 1,505. 1,891.
Rounded end table 63� 30� 281/4� IS U6330 T( ) 1,402. 1,752. 2,103.66� 36� 281/4� IS U6636 T( ) 1,502. 1,877. 2,255.75� 30� 281/4� IS U7530 T( ) 1,502. 1,877. 2,255.78� 36� 281/4� IS U7836 T( ) 1,602. 2,004. 2,403.
Order Code
Example: IS U6330TW; Y311,117, T2
I Interaction TableS Reff System topU Rounded end63 Width30 DepthT Base typeW Top typeY311 Top finish117 Base finishT2 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Specify top type:P Plastic laminateV Veneer
Specify color fields:Top finishBase finishTrim ring finish
Application Notes
T-leg tables provide shared meetingand work surfaces in conjunctionwith Reff Systems planning.
T-leg base tables are fixed at281/4�H. Tables may be increased inheight in1/2� increments byspecifying extender glides (seeAccessories, p. 169).
Knoll Office Tables
146
C-leg tables, split topReff tops
description type w d h pattern no.laminate
Pveneer
V1veneer
V2
Split-top straight table Fixed height 35� 30� 281/4� IS S36DS B( ) $2,090. $2,327. $2,557.41� 30� 281/4� IS S42DS B( ) 2,126. 2,366. 2,610.47� 30� 281/4� IS S48DS B( ) 2,158. 2,408. 2,660.
Manually adjustable 35� 30� 26� - 291/2� IS S36DS A( ) 2,379. 2,615. 2,847.41� 30� 26� - 291/2� IS S42DS A( ) 2,411. 2,656. 2,899.47� 30� 26� - 291/2� IS S48DS A( ) 2,446. 2,699. 2,948.
Crank adjustable 35� 30� 23�- 35� IS S36DS D( ) 3,353. 3,588. 3,820.41� 30� 23�- 35� IS S42DS D( ) 3,385. 3,626. 3,869.47� 30� 23�- 35� IS S48DS D( ) 3,418. 3,670. 3,921.
Split-top corner table Fixed height 47� 24� 281/4� IS C48SS B( ) 2,524. 2,860. 3,205.47� 30� 281/4� IS C48DS B( ) 2,600. 2,962. 3,325.
Manually adjustable 47� 24� 26� - 291/2� IS C48SS A( ) 2,811. 3,151. 3,494.47� 30� 26� - 291/2� IS C48DS A( ) 2,888. 3,250. 3,610.
Crank adjustable 47� 24� 23�- 35� IS C48SS D( ) 3,782. 4,051. 4,122.47� 30� 23�- 35� IS C48DS D( ) 3,862. 4,223. 4,584.
Order Code
Example: IS S36DS AP; 117, 117,T1
I Interaction TableS Reff System topS Straight36 WidthD DepthS Split-topA Base typeP Top type117 Top finish117 Base finishT1 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Base types:A AdjustableB Fixed heightD Crank
Specify top type:P Plastic laminateV Veneer
Specify color fields:Top finishBase finishTrim ring finish
Application Notes
Split-top C-leg tables provide easy,infinite adjustability of full width,keyboard-and-mouse surface.Split-top adjustable height C-legtables may be used interactively inpanel-based or freestanding ReffSystems planning, with 11/4� tops.
Fingertip control allows user toadjust front surface for keyboardand mouse from 5 1/2� above to 6 1/2�below rear surface. Front surfacemay also be adjusted +/-15°.
Adjustable table base may bemanually adjusted to allow rear topheight at any1/2� increment from 26�to 291/2�. Fixed height table basefixes rear worksurface at 283/8�H.
Knoll’s patented crank adjustmentmechanism easily lifts up to 300lbs. of equipment. Five turns of thelow-profile folding crank handleraise or lower the top one inch,through a 231/2� to 35� height range.The handle grip is soft texturedrubber over steel. For split toptables, handle is located at frontcenter of rear surface.
Glides permit 1/2� leveling. Castersraise heights 11/2�. For Counterforcesplit-top applications, see page 169.
Knoll Office Tables
147
Ref
fS
yste
mTo
pTa
bles
C-leg tables, top crank adjustableReff tops
description w d h pattern no.laminate
Pveneer
V1veneer
V2
Rectangular crank adjustable table 30� 24� 271/4� - 431/4� IS S3024 K( ) $1,711. $1,878. $2,051.30� 30� 271/4� - 431/4� IS S3030 K( ) 1,765. 1,903. 1,936.36� 24� 271/4� - 431/4� IS S3624 K( ) 1,737. 1,847. 2,089.36� 30� 271/4� - 431/4� IS S3630 K( ) 1,791. 1,982. 2,166.42� 24� 271/4� - 431/4� IS S4224 K( ) 1,765. 1,950. 2,133.42� 30� 271/4� - 431/4� IS S4230 K( ) 1,817. 2,016. 2,219.48� 24� 271/4� - 431/4� IS S4824 K( ) 1,791. 1,982. 2,166.48� 30� 271/4� - 431/4� IS S4830 K( ) 1,845. 2,051. 2,255.60� 24� 271/4� - 431/4� IS S6024 K( ) 1,841. 2,051. 2,255.60� 30� 271/4� - 431/4� IS S6030 K( ) 1,899. 2,117. 2,334.
Curvilinear corner crank adjustable table 42� 24� 271/4� - 431/4� IS C4224 K( ) 2,063. 2,323. 2,353.48� 24� 271/4� - 431/4� IS C4824 K( ) 2,141. 2,420. 2,473.48� 30� 271/4� - 431/4� IS C4830 K( ) 2,207. 2,502. 2,797.
Rect. split-top crank adjustable table 35� 30� 271/4� - 431/4� IS S36DS K( ) 2,734. 2,926. 3,114.41� 30� 271/4� - 431/4� IS S42DS K( ) 2,760. 2,957. 3,154.47� 30� 271/4� - 431/4� IS S48DS K( ) 2,788. 2,992. 3,197.
Curv. corner split-top crank adj. table 47� 24� 271/4� - 431/4� IS C48SS K( ) 3,085. 3,303. 3,361.47� 30� 271/4� - 431/4� IS C48DS K( ) 3,150. 3,444. 3,738.
Order Code
Example: IS S4830 K;P, 117, 117
I Interaction TableS Reff 11/4� topS Rectangular48 Width30 DepthK Base typeP Top type117 Top finish117 Base finish
Locking casters may be ordered toreplace glides. Casters raise topheight range 11/2�.
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Specify top type:P Plastic laminateV Veneer
Specify color fields:Top finishBase finish
Application Notes
Crank adjustable tables providesimple, quick height adjustment fortoday’s heavy equipment loads, andcan be used in open planworkstations or private offices.
The hand crank adjustmentmechanism easily lifts up to 200pounds. Five turns of the crankhandle raise or lower the top oneinch, through a 27� to 43� heightrange. The handle grip is softtextured rubber over steel.
Rectangular table widths are 2� lessthan nominal while depths are 1�less than nominal for safety. Cornertable widths are 2� less thannominal. Glides permit 1/2� leveling.
Knoll Office Tables
148
C-leg tables, electric adjustableReff tops
description w d h pattern no.laminate
Pveneer
V1veneer
V2
Rectangular electric adjustable table 30� 24� 271/4� - 431/4� IS S3024 E( ) $2,448. $2,617. $2,789.30� 30� 271/4� - 431/4� IS S3030 E( ) 2,501. 2,688. 2,871.36� 24� 271/4� - 431/4� IS S3624 E( ) 2,473. 2,651. 2,828.36� 30� 271/4� - 431/4� IS S3630 E( ) 2,530. 2,721. 2,911.42� 24� 271/4� - 431/4� IS S4224 E( ) 2,503. 2,688. 2,871.42� 30� 271/4� - 431/4� IS S4230 E( ) 2,556. 2,753. 2,953.48� 24� 271/4� - 431/4� IS S4824 E( ) 2,530. 2,721. 2,911.48� 30� 271/4� - 431/4� IS S4830 E( ) 2,584. 2,789. 2,992.60� 24� 271/4� - 431/4� IS S6024 E( ) 2,584. 2,789. 2,992.60� 30� 271/4� - 431/4� IS S6030 E ( ) 2,638. 2,856. 3,075.
Curvilinear corner electric adjustable table 36� 24� 271/4� - 431/4� IS C3624 E( ) 2,592. 2,968. 3,251.42� 24� 271/4� - 431/4� IS C4224 E( ) 2,651. 3,041. 3,324.48� 24� 271/4� - 431/4� IS C4824 E( ) 2,722. 3,127. 3,428.48� 30� 271/4� - 431/4� IS C4830 E( ) 2,769. 3,180. 3,488.
Curv. corner split-top electric adj. table 48� 24� 271/4� - 431/4� IS C48SS E( ) 3,663. 4,071. 4,369.48� 30� 271/4� - 431/4� IS C48DS E( ) 3,709. 4,126. 4,430.
Order Code
Example: IS S4830 EP; 117, 117
I Interaction TableS Reff 11/4� topS Rectangular48 Width30 DepthE Base typeP Top type117 Top finish117 Base finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Specify top type:P Plastic laminateV Veneer
Specify color fields:Top finishBase finish
Application Notes
Electric adjustable tables providesimple, quick height adjustment fortoday’s heavy equipment loads, andcan be used in open planworkstations or private offices.
The electric adjustment mechanismeasily lifts up to 200 pounds.Mechanism adjusts up or down at arate of one inch per second througha 27 1/4� to 43 1/4� height range.Up/down control may be locatednearly anywhere on the underside ofthe table for either left handed orright handed operation.
Rectangular table widths are 2� lessthan actual while depths are 1� lessthan actual for safety. Corner tablewidths are 2� less than nominal.Glides permit 1/2� leveling.
Locking casters may be ordered toreplace glides. Casters raise topheight range 11/2�.
Knoll Office Tables
149
Ref
fS
yste
mTo
pTa
bles
Four-star base, fixed and adjustable heightDividends Horizon top 2mm edgeround
description type w d h pattern no.laminate w/
PVC edgelaminate w/
woodgrain edgelaminate w/metal edge
Round table2mm edge
Fixed height 30� 29� ID R3000 X2 $912. $945. $978.36� 29� ID R3600 X2 938. 983. 1,002.42� 29� ID R4200 X2 993. 1,027. 1,059.48� 29� ID R4800 X2 1,201. 1,234. 1,267.
Fixed height with casters 30� 29� ID R3000 W2 940. 972. 1,006.36� 29� ID R3600 W2 965. 997. 1,030.42� 29� ID R4200 W2 1,020. 1,054. 1,085.
Adjustable 30� 251/4� - 301/4� ID R3000 Y2 1,230. 1,264. 1,297.36� 251/4� - 301/4� ID R3600 Y2 1,296. 1,327. 1,359.42� 251/4� - 301/4� ID R4200 Y2 1,378. 1,409. 1,441.48� 251/4� - 301/4� ID R4800 Y2 1,740. 1,774. 1,806.
Order Code
Example: ID R3600 X2; 117, 117,117, T4
I Interaction TableD Dividends topR Round36 DiameterX Base type2 2 mm top edge117 Top finish117 Edge finish117 Base finishT4 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Application Notes
Four-star base tables may be usedinteractively in panel-based orfreestanding planning any Knollsystem.
Fixed height four-star base tablesare 285/8�H. Adjustable tables maybe manually adjusted for any topheight from 25� - 30� using a hexwrench.
Glides permit 1/2� leveling. Castersfor adjustable tables must bespecified separately (seeAccessories, p. 169).
Adjustable tables are designedprimarily to match height ofpanel-supported worksurfaces.
Note: Y2 in the pattern number forthe adjustable table refers to Y(base type) and 2 (edge finish),not Y2 Medium Grey.
Knoll Office Tables
150
C-leg tables, fixed heightDividends Horizon tops
description w d h pattern no.laminate w/
PVC edgelaminate w/
woodgrain edgelaminate w/metal edge
Straight fixed height table 2913/16� 231/2� 283/8� ID S3024 B2 $756. $789. $823.2913/16� 291/2� 283/8� ID S3030 B2 819. 852. 884.3513/16� 231/2� 283/8� ID S3624 B2 788. 821. 854.3513/16� 291/2� 283/8� ID S3630 B2 849. 882. 913.4113/16� 231/2� 283/8� ID S4224 B2 819. 852. 884.4113/16� 291/2� 283/8� ID S4230 B2 880. 912. 945.4713/16� 231/2� 283/8� ID S4824 B2 849. 882. 913.4713/16� 291/2� 283/8� ID S4830 B2 910. 942. 976.5913/16� 231/2� 283/8� ID S6024 B2 910. 942. 976.5913/16� 291/2� 283/8� ID S6030 B2 971. 1,003. 1,036.7113/16� 231/2� 283/8� ID S7224 B2 971. 1,003. 1,036.7113/16� 291/2� 283/8� ID S7230 B2 1,032. 1,065. 1,098.
Curvilinear corner fixed height table 42� 231/2� 283/8� ID C4224 B2 1,153. 1,187. 1,219.48� 231/2� 283/8� ID C4824 B2 1,242. 1,275. 1,307.48� 291/2� 283/8� ID C4830 B2 1,315. 1,349. 1,381.
Order Code
Example: ID S3624 B2; 117, 117,117, T4
I Interaction TableD Dividends 11/4� topS Straight36 Width24 DepthB2 Fixed Height, 2mm top
edge117 Top finish117 Edge finish117 Base finishT4 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Application Notes
Fixed height tables provideportability in open planworkstations or private offices.
Fixed height C-leg tables may beused interactively in panel-basedDividends planning, with tops tomatch Dividends worksurfaces.
Panel-mounted worksurfacesadjacent to curvilinear corner tablesmust be cantilevered, or desk endpanel supported.
Table base provides integral, lay-inwire management in legs andhorizontal beam. Glides provide1/2�adjustment for leveling.
Specify extender glides (see p. 169)for alignment with Dividendspanel-mounted worksurfaces.
Rectangular tables accommodate18�D suspended floorstanding ormobile Dividends pedestals; 30�Dtables accommodate 24�Dpedestals. Specify extender glidesfor tables with floorstandingpedestals.
Knoll Office Tables
151
Div
iden
dsH
oriz
onS
yste
mTo
pTa
bles
C-leg tables, manually adjustableDividends Horizon tops
description w d h pattern no.laminate w/
PVC edgelaminate w/
woodgrain edgelaminate w/metal edge
Straight manually adjustable table 2913/16� 231/2� 26�- 291/2� ID S3024 A2 $1,048. $1,080. $1,113.2913/16� 291/2� 26�- 291/2� ID S3030 A2 1,109. 1,142. 1,174.3513/16� 231/2� 26�- 291/2� ID S3624 A2 1,077. 1,111. 1,143.3513/16� 291/2� 26�- 291/2� ID S3630 A2 1,141. 1,173. 1,204.4113/16� 231/2� 26�- 291/2� ID S4224 A2 1,109. 1,142. 1,174.4113/16� 291/2� 26�- 291/2� ID S4230 A2 1,171. 1,202. 1,235.4713/16� 231/2� 26�- 291/2� ID S4824 A2 1,141. 1,173. 1,204.4713/16� 291/2� 26�- 291/2� ID S4830 A2 1,201. 1,234. 1,267.5913/16� 231/2� 26�- 291/2� ID S6024 A2 1,201. 1,234. 1,267.5913/16� 291/2� 26�- 291/2� ID S6030 A2 1,259. 1,292. 1,324.7113/16� 231/2� 26�- 291/2� ID S7224 A2 1,259. 1,292. 1,324.7113/16� 291/2� 26�- 291/2� ID S7230 A2 1,322. 1,354. 1,386.
Curvilinear corner manually adjustable table 4113/16� 231/2� 26�- 291/2� ID C4224 A2 1,441. 1,473. 1,505.4713/16� 231/2� 26�- 291/2� ID C4824 A2 1,529. 1,562. 1,595.4713/16� 291/2� 26�- 291/2� ID C4830 A2 1,602. 1,635. 1,668.
Order Code
Example: ID C4830 A2; 117, 117,117, T2
I Interaction TableD Dividends 11/4� topC Curvilinear48 Width30 DepthA2 Adjustable, 2mm top
edge117 Top finish117 Edge finish117 Base finishT2 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Application Notes
Manually adjustable height tablesprovide portable, adjustablesurfaces in open plan workstationsor private offices.
Manually adjustable height C legtables may be used interactively inpanel-based Dividends planning,with laminate tops to match 11/4�worksurfaces with 2mm edge.
Panel-mounted worksurfacesadjacent to curvilinear corner tablesmust be cantilevered, or desk endpanel supported.
Table base may be manuallyadjusted to allow top height atany1/2� increment from 26� to 291/2�.Base provides integral, lay-in wiremanagement in legs and horizontalbeam. Glides permit 1/2� leveling.
Locking casters may be ordered toreplace glides. Casters raise topheight 11/2�. (See Accessories,p. 169)
Knoll Office Tables
152
C-leg tables, crank adjustableDividends Horizon tops
description w d h pattern no.laminate w/
PVC edgelamiante w/
woodgrain edgelaminate w/metal edge
Straight crank adjustable table 2913/16� 231/2� 231/4�- 35� ID S3024 D(R/L)2 $1,992. $2,024. $2,056.2913/16� 291/2� 231/4�- 35� ID S3030 D(R/L)2 2,081. 2,114. 2,146.3513/16� 231/2� 231/4�- 35� ID S3624 D(R/L)2 2,050. 2,082. 2,115.3513/16� 291/2� 231/4�- 35� ID S3630 D(R/L)2 2,110. 2,143. 2,178.4113/16� 231/2� 231/4�- 35� ID S4224 D(R/L)2 2,068. 2,100. 2,132.4113/16� 291/2� 231/4�- 35� ID S4230 D(R/L)2 2,141. 2,175. 2,209.4713/16� 231/2� 231/4�- 35� ID S4824 D(R/L)2 2,110. 2,143. 2,178.4713/16� 291/2� 231/4�- 35� ID S4830 D(R/L)2 2,174. 2,208. 2,240.5913/16� 231/2� 231/4�- 35� ID S6024 D(R/L)2 2,174. 2,208. 2,240.5913/16� 291/2� 231/4�- 35� ID S6030 D(R/L)2 2,232. 2,266. 2,298.
Curvilinear corner crank adjustable table 4113/16� 231/2� 231/4�- 35� ID C4224 D2 2,415. 2,447. 2,479.4713/16� 231/2� 231/4�- 35� ID C4824 D2 2,502. 2,535. 2,568.4713/16� 291/2� 231/4�- 35� ID C4830 D2 2,574. 2,606. 2,638.
Order Code
Example: ID C4830 D2; 117, 117,117, T2
I Interaction TableD Dividends 11/4� topC Curvilinear48 Width30 DepthD Crank adjustable2 2mm top edge117 Top finish117 Edge finish117 Base finishT2 Trim ring
Specification Information
Pattern number logic:
1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Handle location
Handle location (rectangular only):
R Right handL Left hand
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Application Notes
Crank adjustable tables providesimple, quick height adjustment fortoday’s heavy equipment loads, andcan be used in open planworkstations or private offices.
Crank adjustable C leg tables maybe used interactively in panel-basedDividends planning, with laminatetops to match 11/4� worksurfaceswith 2mm edge.
Knoll’s patented crank adjustmentmechanism easily lifts up to 300lbs. of equipment. Five turns of thelow-profile folding crank handleraise or lower the top one inch,through a 231/2� to 35� height range.The handle grip is soft texturedrubber over steel. Handle may bespecified right or left on rectangulartables.
Actual rectangular table widthsare3/16� less than nominal. Actualcorner table widths are1/2� less thannominal. Glides permit 1/2� leveling.
Locking casters may be ordered toreplace glides. Casters raise topheight range 11/2� (see Accessories,p. 169).
Knoll Office Tables
153
Div
iden
dsH
oriz
onS
yste
mTo
pTa
bles
C-leg tables, Counterforce™ adjustableDividends Horizon tops
description w d h pattern no.laminate w/
PVC edgelaminate w/
woodgrain edgelaminate w/metal edge
Straight counterforce table 2913/16� 23� 26� - 41� ID S3024 C2 $2,927. $2,959. $2,991.2913/16� 29� 26� - 41� ID S3030 C2 2,988. 3,020. 3,052.3513/16� 23� 26� - 41� ID S3624 C2 2,957. 2,989. 3,021.3513/16� 29� 26� - 41� ID S3630 C2 3,019. 3,050. 3,083.4113/16� 23� 26� - 41� ID S4224 C2 2,988. 3,020. 3,052.4113/16� 29� 26� - 41� ID S4230 C2 3,048. 3,081. 3,113.4713/16� 23� 26� - 41� ID S4824 C2 3,019. 3,050. 3,083.4713/16� 29� 26� - 41� ID S4830 C2 3,080. 3,112. 3,144.5913/16� 23� 26� - 41� ID S6024 C2 3,080. 3,112. 3,144.5913/16� 29� 26� - 41� ID S6030 C2 3,139. 3,170. 3,203.
Order Code
Example: ID S4830 C2; 117, 117,117, T4
I Interaction TableD Dividends 11/4� topS Top shape48 Width30 DepthC2 Base type, 2mm top edge117 Top finish117 Edge finish117 Base finishT4 Trim ring
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Application Notes
Adjustable height Counterforce™C-leg tables may be usedinteractively in panel-basedDividends planning, with laminatetops to match 11/4� worksurfaceswith 2mm edge.
Fingertip control allows user toadjust from seated to standing-workheight (26� - 41�) without tools oreffort. Counterforce tables may beadjusted by the user tocounterbalance loads of 0-90 lbs.
Worksurfaces adjacent tocurvilinear corner tables must becantilevered not desk endpanel-supported.
Table base provides integral, lay-inwire management in legs andhorizontal beam. Glides provide1/2�adjustment for leveling.
Note:24�D Counterforce tables provideonly 16� clear kneespace inside the121/4� cross-beam, 12� above thefloor. ANSI/BIFMA recommendsminimum 19�D kneespace,increasing to 23�D at toe height.
For corner Counterforceapplications, see page 118.
Knoll Office Tables
154
T-leg tablesDividends Horizon tops
description w d h pattern no.laminate w/
PVC edgelaminate w/
woodgrain edgelaminate w/metal edge
Straight table 4713/16� 291/2� 283/8� ID S4830 T2 $910. $942. $976.4713/16� 351/2� 283/8� ID S4836 T2 971. 1,003. 1,036.5913/16� 291/2� 283/8� ID S6030 T2 971. 1,003. 1,036.5913/16� 351/2� 283/8� ID S6036 T2 1,048. 1,080. 1,113.7113/16� 291/2� 283/8� ID S7230 T2 1,048. 1,080. 1,113.7113/16� 351/2� 283/8� ID S7236 T2 1,100. 1,134. 1,166.
Rounded end table 63� 30� 283/8� ID U6330 T2 1,276. 1,308. 1,341.66� 36� 283/8� ID U6636 T2 1,365. 1,398. 1,432.75� 30� 283/8� ID U7530 T2 1,365. 1,398. 1,432.78� 36� 283/8� ID U7836 T2 1,460. 1,491. 1,523.
Order Code
Example: ID U7530 T2; 117, 117,117, T1
I Interaction TableD Dividends topU Rounded end75 Width30 DepthT2 Base type, 2mm top edge117 Top finish117 Top edge finish117 Base finishT1 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type
Specify color fields:Top finishTop edge finishBase finishTrim ring finish
Application Notes
T-leg tables provide shared meetingor worksurfaces in conjunction withDividends or other Interactiontables. Laminate tops match 11/4�worksurfaces in 2mm edge.
T-leg base tables are fixed at283/8�H. Stacking glide extendersmay be specified to increase tableheight in1/2� increments. (SeeAccessories, p. 169)
Knoll Office Tables
155
Div
iden
dsH
oriz
onS
yste
mTo
pTa
bles
C-leg tables, split-topDividends Horizon tops
description type w d h pattern no.laminate w/
PVC edgelaminate w/
woodgrain edgelaminate w/metal edge
Split-top straight table Crank adjustable 3413/16� 291/2� 231/2�- 35� ID S36DS D2 $3,268. $3,299. $3,332.Crank adjustable 4613/16� 291/2� 231/2�- 35� ID S48DS D2 3,330. 3,362. 3,394.Fixed height 3413/16� 291/2� 283/8� ID S36DS B2 2,006. 2,040. 2,072.Fixed height 4613/16� 291/2� 283/8� ID S48DS B2 2,068. 2,100. 2,132.Manually adjustable 3413/16� 291/2� 26� - 291/2� ID S36DS A2 2,297. 2,329. 2,362.Manually adjustable 4613/16� 291/2� 26� - 291/2� ID S48DS A2 2,358. 2,390. 2,422.
Split-top curvilinear corner table Fixed height 47� 231/2� 283/8� ID C48SS B2 2,399. 2,430. 2,462.47� 291/2� 283/8� ID C48DS B2 2,469. 2,501. 2,534.
Manually adjustable 47� 231/2� 26� - 291/2� ID C48SS A2 2,687. 2,718. 2,750.47� 291/2� 26� - 291/2� ID C48DS A2 2,759. 2,792. 2,824.
Crank adjustable 47� 231/2� 231/2�- 35� ID C48SS D2 3,658. 3,690. 3,723.47� 291/2� 231/2�- 35� ID C48DS D2 3,731. 3,765. 3,797.
Order Code
Example: ID S36DS A2; 117, 117,117, T1
I Interaction TableD Dividends 11/4� topS Straight36 WidthD DepthS Split topA2 Base type, 2mm top edge117 Top finish117 Top edge finish117 Base finishT1 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type
Color fields:Top finishTop edge finishBase finishTrim ring finish
Application Notes
Split-top tables provide easy,infinite adjustability of full width,keyboard-and-mouse surface.Split-top adjustable height C-legtables may be used interactively inpanel-based Dividends planning,with tops to match 11/4�worksurfaces.
Fingertip control allows user toadjust front surface for keyboardand mouse from 5 1/2� above to 6 1/2�below rear surface. Front surfacemay also be adjusted +/-15°.
Adjustable table base may bemanually adjusted to allow rear topheight at any1/2� increment from 26�to 291/2�. Fixed height table basefixes rear worksurface at 283/8�H.
Knoll’s patented crank adjustmentmechanism easily lifts up to 300lbs. of equipment. Five turns of thelow-profile folding crank handleraise or lower the top one inch,through a 231/2� to 35� height range.The handle grip is soft texturedrubber over steel. For split toptables, handle is located in frontcenter of rear worksurface.
Glides permit 1/2� leveling. Castersraise heights 11/2�. For Counterforcesplit-top applications, see page 118.
Knoll Office Tables
156
C-leg tables, top crank adjustableDividends Horizon tops
description w d h pattern no.laminate w/
PVC edgelaminate w/
woodgrain edgelamiante w/metal edge
Straight crank adjustable table 30� 24� 271/4� - 431/4� ID S3024 K2 $1,625. $1,650. $1,678.30� 30� 271/4� - 431/4� ID S3030 K2 1,697. 1,723. 1,750.36� 24� 271/4� - 431/4� ID S3624 K2 1,672. 1,698. 1,724.36� 30� 271/4� - 431/4� ID S3630 K2 1,721. 1,748. 1,775.42� 24� 271/4� - 431/4� ID S4224 K2 1,685. 1,712. 1,739.42� 30� 271/4� - 431/4� ID S4230 K2 1,747. 1,774. 1,801.48� 24� 271/4� - 431/4� ID S4824 K2 1,721. 1,748. 1,775.48� 30� 271/4� - 431/4� ID S4830 K2 1,771. 1,800. 1,825.60� 24� 271/4� - 431/4� ID S6024 K2 1,771. 1,800. 1,825.60� 30� 271/4� - 431/4� ID S6030 K2 1,820. 1,846. 1,874.
Curvilinear corner crank adjustable table 42� 24� 271/4� - 431/4� ID C4224 K2 1,969. 1,996. 2,021.48� 24� 271/4� - 431/4� ID C4824 K2 2,042. 2,068. 2,095.48� 30� 271/4� - 431/4� ID C4830 K2 2,098. 2,125. 2,151.
Straight split top crank adjustable table 42� 30� 271/4� - 431/4� ID S42DS K2 2,664. 2,691. 2,718.48� 30� 271/4� - 431/4� ID S48DS K2 2,715. 2,742. 2,769.
Curv. corner split-top crank adjustable table 48� 24� 271/4� - 431/4� ID C48SS K2 2,984. 3,011. 3,037.48� 30� 271/4� - 431/4� ID C48DS K2 3,043. 3,069. 3,094.
Order Code
Example: ID C4830 K2; 117, 117,117
I Interaction TableD Dividends 11/4� topC Curvilinear48 Width30 DepthK Top crank adjustable2 2mm top edge117 Top finish117 Edge finish117 Base finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type
Specify color fields:Top finishTop edge finishBase finish
Application Notes
Crank adjustable tables providesimple, quick height adjustment fortoday’s heavy equipment loads, andcan be used in open planworkstations or private offices.
Crank adjustable C leg tables maybe used interactively in panel-basedDividends planning, with laminatetops to match 11/4� worksurfaceswith 2mm edge.
The hand crank adjustmentmechanism easily lifts up to 200pounds. Five turns of the crankhandle raise or lower the top oneinch, through a 27 1/4� to 43 1/4�height range. The handle grip issoft textured rubber over steel.
Rectangular table widths are 2� lessthan nominal while depths are 1�less than nominal for safety. Cornertable widths are 2� less thannominal. Glides permit 1/2� leveling.
Locking casters may be ordered toreplace glides. Casters raise topheight range 11/2�.
Knoll Office Tables
157
Div
iden
dsH
oriz
onS
yste
mTo
pTa
bles
C-leg tables, electric adjustableDividends Horizon tops
description w d h pattern no.laminate w/
PVC edgelaminate w/
woodgrain edgelaminate w/metal edge
Straight electric adjustable table 30� 24� 271/4� - 431/4� ID S3024 E2 $2,386. $2,413. $2,440.30� 30� 271/4� - 431/4� ID S3030 E2 2,435. 2,462. 2,488.36� 24� 271/4� - 431/4� ID S3624 E2 2,410. 2,436. 2,464.36� 30� 271/4� - 431/4� ID S3630 E2 2,461. 2,487. 2,513.42� 24� 271/4� - 431/4� ID S4224 E2 2,435. 2,462. 2,488.42� 30� 271/4� - 431/4� ID S4230 E2 2,485. 2,511. 2,539.48� 24� 271/4� - 431/4� ID S4824 E2 2,461. 2,487. 2,513.48� 30� 271/4� - 431/4� ID S4830 E2 2,510. 2,538. 2,565.60� 24� 271/4� - 431/4� ID S6024 E2 2,510. 2,538. 2,565.60� 302� 271/4� - 431/4� ID S6030 E2 2,559. 2,585. 2,610.
Curvilinear corner electric adjustable table 36� 24� 271/4� - 431/4� ID C3624 E2 2,592. 2,641. 2,694.42� 24� 271/4� - 431/4� ID C4224 E2 2,651. 2,716. 2,781.48� 24� 271/4� - 431/4� ID C4824 E2 2,722. 2,800. 2,878.48� 30� 271/4� - 431/4� ID C4830 E2 2,769. 2,854. 2,940.
Curv. corner split-top electric adjustable table 48� 24� 271/4� - 431/4� ID C48SS E2 3,663. 3,741. 3,819.48� 30� 271/4� - 431/4� ID C48DS E2 3,709. 3,795. 3,882.
Order Code
Example: ID C4830 E2; 117, 117,117
I Interaction TableD Dividends 11/4� topC Curvilinear48 Width30 DepthE Electric adjustable2 2mm top edge117 Top finish117 Edge finish117 Base finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type
Specify color fields:Top finishTop edge finishBase finish
Application Notes
Electric adjustable tables providesimple, quick height adjustment fortoday’s heavy equipment loads, andcan be used in open planworkstations or private offices.
Electric adjustable C leg tables maybe used interactively in panel-basedDividends planning, with laminatetops to match 11/4� worksurfaceswith 2mm edge.
The electric adjustment mechanismeasily lifts up to 200 pounds.Mechanism adjusts up or down at arate of one inch per second througha 27 1/4� to 43 1/4� height range.Up/down control may be locatednearly anywhere on the underside ofthe table for either left handed orright handed operation.
Rectangular table widths are 2� lessthan actual while depths are 1� lessthan actual for safety. Corner tablewidths are 2� less than nominal.Glides permit 1/2� leveling.
Locking casters may be ordered toreplace glides. Casters raise topheight range 11/2�.
Knoll Office Tables
158
Four-star base, fixed and adjustable heightCascade edge topsround
description type w h pattern no. Solid Woodgrain
Round table Fixed height 30� 29� ICER3000X $940. $993.36� 29� ICER3600X 965. 1,018.42� 29� ICER4200X 1,024. 1,077.48� 29� ICER4800X 1,237. 1,290.
Fixed height with casters 30� 29� ICER3000W 969. 1,022.36� 29� ICER3600W 993. 1,047.42� 29� ICER4200W 1,051. 1,104.
Adjustable 30� 251/4� - 301/4� ICER3000Y 1,268. 1,321.36� 251/4� - 301/4� ICER3600Y 1,333. 1,386.42� 251/4� - 301/4� ICER4200Y 1,417. 1,470.48� 251/4� - 301/4� ICER4800Y 1,794. 1,847.
Order Code
Example: ICE R4200 X; 118, 113,T1
I Interaction TableCE Cascade edge topR Round4200 42� wX Base type118 Top finish113 Base finishT1 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Available Top colors:
Solid:114 Folkstone Grey117 Soft Grey118 Bright White119 Pumice
Woodgrain:124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut
Specify color fields:
Top finishBase finishTrim ring finish
Bold line on image representsCascade Edge detail.
Application Notes
Four-star base tables may be usedinteractively in panel-based orfreestanding planning any Knollsystem.
Fixed height four-star base tablesare 29�H. Adjustable tables may bemanually adjusted for any top heightfrom 251/4� - 301/4� using a hexwrench.
Glides permit 1/2� leveling. Castersfor adjustable tables must bespecified separately (seeAccessories, p. 169).
Adjustable tables are designedprimarily to match height ofpanel-supported worksurfaces.
Knoll Office Tables
159
Cas
cade
Edg
eTo
pTa
bles
C-leg tables, fixed heightCascade edge tops
description w d h pattern no. Solid Woodgrain
Straight fixed height 30� 24 283/8� ICES3024B $780. $833.30� 30 283/8� ICES3030B 843. 896.36� 24 283/8� ICES3624B 812. 865.36� 30 283/8� ICES3630B 874. 928.42� 24� 283/8� ICES4224B 843. 896.42� 30� 283/8� ICES4230B 906. 959.48� 24� 283/8� ICES4824B 874. 928.48� 30� 283/8� ICES4830B 938. 991.60� 24� 283/8� ICES6024B 938. 991.60� 30� 283/8� ICES6030B 1,000. 1,054.72� 24� 283/8� ICES7224B 1,000. 1,054.72� 30� 283/8� ICES7230B 1,063. 1,116.
Curvilinear corner fixed height 42� 24� 283/8� ICEC4224B 1,189. 1,242.48� 24� 283/8� ICEC4824B 1,279. 1,333.48� 30� 283/8� ICEC4830B 1,355. 1,408.
Order Code
Example: ICE S4230 B; 118, 113,T1
I Interaction TableCE Cascade edge topS Straight42 Width30 DepthB Base type118 Top finish113 Base finishT1 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Available Top colors:
Solid:114 Folkstone Grey117 Soft Grey118 Bright White119 Pumice
Woodgrain:124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut
Specify color fields:Top finishBase finishTrim ring finish
Add and ‘‘E’’ to the end of a straighttop pattern number for Equity sizedtop.
Bold line on image representsCascade Edge detail.
Application Notes
Fixed height tables provideportable, independent surfaces inopen plan workstations or privateoffices.
Fixed height C-leg tables may beused interactively in panel-based orfreestanding Morrison planning,with tops to match 11/4�worksurfaces.
Table base provides integral, lay-inwire management in legs andhorizontal beam. Glides provide1/2�adjustment for leveling.
Stacking glide extenders raise topheight in1/2� increments.
Rectangular tables accommodate18�D suspended, floorstanding ormobile pedestals; 30�D tablesaccommodate 24�D pedestals.
Actual rectangular table widthsare3/16� less than nominal. Actualcorner table widths are1/2� less thannominal.
Knoll Office Tables
160
C-leg tables, manually adjustableCascade edge tops
description w d h pattern no. Solid Woodgrain
Straight manually adjustable 30� 24� 26� - 291/2� ICES3024A $1,078. $1,132.30� 30� 26� - 291/2� ICES3030A 1,143. 1,196.36� 24� 26� - 291/2� ICES3624A 1,111. 1,164.36� 30� 26� - 291/2� ICES3630A 1,175. 1,228.42� 24� 26� - 291/2� ICES4224A 1,143. 1,196.42� 30� 26� - 291/2� ICES4230A 1,204. 1,258.48� 24� 26� - 291/2� ICES4824A 1,175. 1,228.48� 30� 26� - 291/2� ICES4830A 1,237. 1,290.60� 24� 26� - 291/2� ICES6024A 1,237. 1,290.60� 30� 26� - 291/2� ICES6030A 1,298. 1,351.72� 24� 26� - 291/2� ICES7224A 1,298. 1,351.72� 30� 26� - 291/2� ICES7230A 1,360. 1,413.
Curvilinear corner manually adjustable 42� 24� 26� - 291/2� ICEC4224A 1,486. 1,540.48� 24� 26� - 291/2� ICEC4824A 1,576. 1,630.48� 30� 26� - 291/2� ICEC4830A 1,650. 1,704.
Order Code
Example: ICE S4230 A; 118, 113,T1
I Interaction TableCE Cascade edge topS Straight42 Width30 DepthA Base type118 Top finish113 Base finishT1 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Available Top Colors:
Solid:114 Folkstone Grey117 Soft Grey118 Bright White119 Pumice
Woodgrain:124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut
Specify color fields:Top finishBase finishTrim ring finish
Add and ‘‘E’’ to the end of a straighttop pattern number for Equity sizedtop.
Bold line on image representsCascade Edge detail.
Application Notes
Manually adjustable tables provideportable, adjustable height surfacesin open plan workstations or privateoffices.
C-leg tables may be usedinteractively in panel-based orfreestanding Morrison planning,with tops to match 11/4�worksurfaces.
Table base may be manuallyadjusted to allow top height atany1/2� increment from 26� to 291/2�.Base provides integral, lay-in wiremanagement in legs and horizontalbeam. Glides permit 1/2� leveling.
Actual rectangular table widthsare3/16� less than nominal. Actualcorner table widths are1/2� less thannominal.
Locking casters may be ordered toreplace glides. Casters raise topheight range 11/2� (see Accessories,p. 169).
Knoll Office Tables
161
Cas
cade
Edg
eTo
pTa
bles
C-leg tables, crank adjustableCascade edge tops
description w d h pattern no. Solid Woodgrain
Straight crank adjustable 30� 24� 231/4� - 35� ICES3024D(R/L) $2,051. $2,104.30� 30� 231/4� - 35� ICES3030D(R/L) 2,143. 2,197.36� 24� 231/4� - 35� ICES3624D(R/L) 2,110. 2,164.36� 30� 231/4� - 35� ICES3630D(R/L) 2,175. 2,228.42� 24� 231/4� - 35� ICES4224D(R/L) 2,130. 2,183.42� 30� 231/4� - 35� ICES4230D(R/L) 2,209. 2,262.48� 24� 231/4� - 35� ICES4824D(R/L) 2,175. 2,228.48� 30� 231/4� - 35� ICES4830D(R/L) 2,240. 2,293.60� 24� 231/4� - 35� ICES6024D(R/L) 2,240. 2,293.60� 30� 231/4� - 35� ICES6030D(R/L) 2,300. 2,353.
Curvilinear corner crank adjustable 42� 24� 231/4� - 35� ICEC4224D 2,486. 2,539.48� 24� 231/4� - 35� ICEC4824D 2,578. 2,631.48� 30� 231/4� - 35� ICEC4830D 2,650. 2,703.
Order Code
Example: ICE S4230 DR; 118, 113,T1
I Interaction TableCE Cascade edge topS Straight42 Width30 DepthD Base typeR Right handle location118 Top finish113 Base finishT1 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Handle location10. Top type
Available Top Colors:
Solid:114 Folkstone Grey117 Soft Grey118 Bright White119 Pumice
Woodgrain:124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut
Handle location (rectangular only):R Right handL Left hand
Specify color fields:Top finishBase finishTrim ring finish
Add and ‘‘E’’ to the end of a straighttop pattern number for Equity sizedtop.
Bold line on image representsCascade Edge detail.
Application Notes
Crank adjustable tables providesimple, quick height adjustment fortoday’s heavy equipment loads, andcan be used in open planworkstations or private offices.
Crank adjustable C-leg tables maybe used interactively in panel-basedor freestanding Morrison planning,with tops to match 11/4�worksurfaces.
The hand crank adjustmentmechanism easily lifts up to 300lbs. of equipment. Five turns of thelow-profile folding crank handleraise or lower the top one inch,through a 231/4� to 35� height range.The handle grip is soft texturedrubber over steel. Handle may bespecified right or left on rectangulartables.
Actual rectangular table widths are1� less than nominal. Actual cornertable widths are 11/2� less thannominal. Glides permit 1/2� leveling.
Locking casters may be ordered toreplace glides. Casters raise topheight range 11/2� (see Accessories,p. 169).
Knoll Office Tables
162
C-leg tables, Counterforce™ adjustableCascade edge tops
description w d h pattern no. Solid Woodgrain
Straight counterbalance adjustable 30� 24� 26� - 41� ICES3024C $3,015. $3,068.30� 30� 26� - 41� ICES3030C 3,077. 3,130.36� 24� 26� - 41� ICES3624C 3,045. 3,099.36� 30� 26� - 41� ICES3630C 3,110. 3,163.42� 24� 26� - 41� ICES4224C 3,077. 3,130.42� 30� 26� - 41� ICES4230C 3,140. 3,193.48� 24� 26� - 41� ICES4824C 3,110. 3,163.48� 30� 26� - 41� ICES4830C 3,171. 3,225.60� 24� 26� - 41� ICES6024C 3,171. 3,225.60� 30� 26� - 41� ICES6030C 3,233. 3,286.
Order Code
Example: ICE S4230 C; 118, 113,T1
I Interaction TableCE Cascade edge topS Straight42 Width30 Depth of returnC Base type118 Top finish113 Base finishT1 Trim ring finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Available Top Colors:
Solid:114 Folkstone Grey117 Soft Grey118 Bright White119 Pumice
Woodgrain:124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut
Specify color fields:Top finishBase finishTrim ring finish
Add and ‘‘E’’ to the end of a straighttop pattern number for Equity sizedtop.
Bold line on image representsCascade Edge detail.
Application Notes
Adjustable height Counterforce™-leg tables may be usedinteractively in panel-based orfreestanding Morrison planning,with tops to match 11/4�worksurfaces.
Fingertip control allows user toadjust from seated- to standing-workheight (26�-41�) without tools oreffort. Counterforce tables may beadjusted by the user to balanceloads of 0-90 lbs.
Note:24�D rectangular Counterforcetables provide only 16�D clearkneespace inside 12�H crossbeam,12� above the floor. ANSI/BIFMArecommends minimum 15�Dkneespace, increasing on a diagonalto 23�D at toe height.
Actual rectangular table widthsare3/16� less than nominal. Forcorner Counterforce applications,see page 118.
Knoll Office Tables
163
Cas
cade
Edg
eTo
pTa
bles
C-leg tables, top crank adjustableCascade edge tops
description w d h pattern no. Solid Woodgrain
Straight Top Crank adjustable 30� 24� 271/4� - 431/4� ICES3024K $1,673. $1,726.30� 30� 271/4� - 431/4� ICES3030K 1,748. 1,801.36� 24� 271/4� - 431/4� ICES3624K 1,722. 1,775.36� 30� 271/4� - 431/4� ICES3630K 1,771. 1,825.42� 24� 271/4� - 431/4� ICES4224K 1,736. 1,790.42� 30� 271/4� - 431/4� ICES4230K 1,800. 1,853.48� 24� 271/4� - 431/4� ICES4824K 1,771. 1,825.48� 30� 271/4� - 431/4� ICES4830K 1,827. 1,880.60� 24� 271/4� - 431/4� ICES6024K 1,827. 1,880.60� 30� 271/4� - 431/4� ICES6030K 1,875. 1,928.
Curvilinear Corner Top Crank adjustable 42� 24� 271/4� - 431/4� ICEC4224K 2,027. 2,081.48� 24� 271/4� - 431/4� ICEC4824K 2,102. 2,156.48� 30� 271/4� - 431/4� ICEC4830K 2,160. 2,213.
Order Code
Example: ICE S4230 K; 118, 113
I Interaction TableCE Cascade edge topS Straight42 Width30 DepthK Base type118 Top finish113 Base finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Base types:K Top crank
Available Top Colors:
Solid:114 Folkstone Grey117 Soft Grey118 Bright White119 Pumice
Woodgrain:124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut
Specify color fields:Top finishBase finish
Add and ‘‘E’’ to the end of a straighttop pattern number for Equity sizedtop.
Locking casters may be ordered toreplace glides. Casters raise topheight range 11/2�.
Bold line on image representsCascade Edge detail.
Application Notes
Crank adjustable tables providesimple, quick height adjustment fortoday’s heavy equipment loads, andcan be used in open planworkstations or private offices.
Crank adjustable C-leg tables maybe used interactively in panel-basedor freestanding Morrison planning,with tops to match 11/4�worksurfaces.
The hand crank adjustmentmechanism easily lifts up to 200pounds. Five turns of the crankhandle raise or lower the top oneinch, through a 27 1/4� to 43 1/4�height range. The handle grip is softtextured rubber over steel.
Rectangular table widths are 2� lessthan nominal while depths are 1�less than nominal. Corner tablewidths are 2� less than nominal.Glides permit 1/2� leveling.
Knoll Office Tables
164
C-leg tables, electric adjustableCascade edge tops
description w d h pattern no. Solid Woodgrain
Straight electirc adjustable 30� 24� 271/4� - 431/4� ICES3024E $2,457. $2,510.30� 30� 271/4� - 431/4� ICES3030E 2,509. 2,563.36� 24� 271/4� - 431/4� ICES3624E 2,483. 2,536.36� 30� 271/4� - 431/4� ICES3630E 2,533. 2,586.42� 24� 271/4� - 431/4� ICES4224E 2,509. 2,563.42� 30� 271/4� - 431/4� ICES4230E 2,559. 2,613.48� 24� 271/4� - 431/4� ICES4824E 2,533. 2,586.48� 30� 271/4� - 431/4� ICES4830E 2,586. 2,639.60� 24� 271/4� - 431/4� ICES6024E 2,586. 2,639.60� 30� 271/4� - 431/4� ICES6030E 2,636. 2,690.
Curvilinear corner electirc adjustable 36� 24� 271/4� - 431/4� ICEC3624E 2,669. 2,722.42� 24� 271/4� - 431/4� ICEC4224E 2,729. 2,782.48� 24� 271/4� - 431/4� ICEC4824E 2,804. 2,858.48� 30� 271/4� - 431/4� ICEC4830E 2,852. 2,905.
Order Code
Example: ICE S4230 E; 118, 113
I Interaction TableCE Cascade edge topS Straight42 Width30 DepthE Base type118 Top finish113 Base finish
Specification Information
Pattern number logic:1. Interaction table2. System top3. Top shape4-7. Top size8. Base type9. Top type
Base types:E Electric
Available Top Colors:
Solid:114 Folkstone Grey117 Soft Grey118 Bright White119 Pumice
Woodgrain:124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut
Specify color fields:Top finishBase finish
Add and ‘‘E’’ to the end of a straighttop pattern number for Equity sizedtop.
Bold line on image representsCascade Edge detail.
Application Notes
Electric adjustable tables providesimple, quick height adjustment fortoday’s heavy equipment loads, andcan be used in open planworkstations or private offices.
Electric adjustable C-leg tables maybe used interactively in panel-basedor freestanding Morrison planning,with tops to match 11/4�worksurfaces.
The electric adjustment mechanismeasily lifts up to 200 pounds.Mechanism adjusts up or down at arate of one inch per second througha 27 1/4� to 43 1/4� height range.Up/down control may be locatednearly anywhere on the underside ofthe table for either left handed orright handed operation.
Rectangular table widths are 2� lessthan actual while depth is 1� lessthan actual for safety.Corner tablewidths are 2� less than nominal.Glides permit 1/2� leveling.
Knoll Office Tables
165
Cas
cade
Edg
eTo
pTa
bles
Interaction basesNo tops
description type w d h pattern no. painted
Fixed height C-leg table base 27� 21� 27� IB 27SB $694.27� 24� 27� IB 27DB 722.33� 21� 27� IB 33SB 710.33� 24� 27� IB 33DB 740.39� 21� 27� IB 39SB 722.39� 24� 27� IB 39DB 751.45� 21� 27� IB 45SB 740.45� 24� 27� IB 45DB 769.57� 21� 27� IB 57SB 769.57� 24� 27� IB 57DB 797.
Manually adjustable C-leg table base 27� 21� 241/2� - 28� IB 27SA 983.27� 24� 241/2� - 28� IB 27DA 1,011.33� 21� 241/2� - 28� IB 33SA 997.33� 24� 241/2� - 28� IB 33DA 1,028.39� 21� 241/2� - 28� IB 39SA 1,011.39� 24� 241/2� - 28� IB 39DA 1,040.45� 21� 241/2� - 28� IB 45SA 1,028.45� 24� 241/2� - 28� IB 45DA 1,057.57� 21� 241/2� - 28� IB 57SA 1,057.57� 24� 241/2� - 28� IB 57DA 1,083.
Counterforce adjustable C-leg table base 27� 21� 25� - 40� IB 27SC 2,860.27� 24� 25� - 40� IB 27DC 2,888.33� 21� 25� - 40� IB 33SC 2,877.33� 24� 25� - 40� IB 33DC 2,906.39� 21� 25� - 40� IB 39SC 2,888.39� 24� 25� - 40� IB 39DC 2,919.45� 21� 25� - 40� IB 45SC 2,906.45� 24� 25� - 40� IB 45DC 2,934.57� 21� 25� - 40� IB 57SC 2,934.57� 24� 25� - 40� IB 57DC 2,962.
Order Code
Example: IB 32X; 117, T4
I InteractionB Base only32 Diameter of baseX Base type117 Base finishT4 Trim ring finish
Specification Information
Pattern number logic:1. Interaction2. Base only3-4. Base size5. Base type
Specify color fields:
Base finishTrim ring finish
Electric bases come with a defaultcolor trim ring.
Application Notes
Interaction bases may be used withexisting or custom size or shapeKnoll systems tops with solid woodcore construction.
T-leg bases support tops from 24� to36�D, centered over 24� feet. Basesfor split top tables have 11�Dcantilever arms (minimum depth ofmonitor surface). Split topmechanism does not include tops.Four star bases are shown with thecorresponding maximum roundtable diameter.
Specify 21�D bases for tops 21�-24�deep. Specify 24�D bases for tops25�-30�D. Tops up to 36�D may besupported on 24�D bases, with 6�overhang at the back of the table.
Table heights and ranges shownabove do not include top thickness.
Adjustable four star base not for usewith tops exceeding 42� in anydimension.
Counterforce base only supportsweight up to 150 lbs.
Split-top mechanisms have a 12�range ( 5 1/2� up and 6 1/2� down )and a plus or minus 15° tilt. 150lbs. lift capacity not including thesurface.
Electric base only supports weightup to 200lbs.
Bases are designed to support topsup to but no more than 16� widerthan the base.
Knoll Office Tables
166
Interaction basesNo tops
description type w d h pattern no. painted
Fixed height T-leg base 39� 24� 27� IB 39T $751.45� 24� 27� IB 45T 769.57� 24� 27� IB 57T 797.
Fixed height bases for split-top tables 33� 24� 27� IB 33DSB 722.39� 24� 27� IB 39DSB 740.45� 24� 27� IB 45DSB 751.
Manually adjustable bases for split-top tables 33� 24� 241/2� - 28� IB 33DSA 1,011.39� 24� 241/2� - 28� IB 39DSA 1,028.45� 24� 241/2� - 28� IB 45DSA 1,040.
Counterforce bases for split-top tables 27� 24� 25� - 40� IB 27DSC 2,778.33� 24� 25� - 40� IB 33DSC 2,888.39� 24� 25� - 40� IB 39DSC 2,906.45� 24� 25� - 40� IB 45DSC 2,919.
Electric adjustable C-leg table base 22� 21� 26� - 42� IB 22SE 2,200.22� 24� 26� - 42� IB 22DE 2,222.28� 21� 26� - 42� IB 28SE 2,215.28� 24� 26� - 42� IB 28DE 2,237.34� 21� 26� - 42� IB 34SE 2,222.34� 24� 26� - 42� IB 34DE 2,246.40� 21� 26� - 42� IB 40SE 2,237.40� 24� 26� - 42� IB 40DE 2,256.52� 21� 26� - 42� IB 52SE 2,256.52� 24� 26� - 42� IB 52DE 2,278.
Order Code
Example: IB 32X; 117, T4
I InteractionB Base only32 Diameter of baseX Base type117 Base finishT4 Trim ring finish
Specification Information
Pattern number logic:1. Interaction2. Base only3-4. Base size5. Base type
Specify color fields:
Base finishTrim ring finish
Electric bases come with a defaultcolor trim ring.
Application Notes
Interaction bases may be used withexisting or custom size or shapeKnoll systems tops with solid woodcore construction.
T-leg bases support tops from 24� to36�D, centered over 24� feet. Basesfor split top tables have 11�Dcantilever arms (minimum depth ofmonitor surface). Split topmechanism does not include tops.Four star bases are shown with thecorresponding maximum roundtable diameter.
Specify 21�D bases for tops 21�-24�deep. Specify 24�D bases for tops25�-30�D. Tops up to 36�D may besupported on 24�D bases, with 6�overhang at the back of the table.
Table heights and ranges shownabove do not include top thickness.
Adjustable four star base not for usewith tops exceeding 42� in anydimension.
Counterforce base only supportsweight up to 150 lbs.
Split-top mechanisms have a 12�range ( 5 1/2� up and 6 1/2� down )and a plus or minus 15° tilt. 150lbs. lift capacity not including thesurface.
Electric base only supports weightup to 200lbs.
Bases are designed to support topsup to but no more than 16� widerthan the base.
Knoll Office Tables
167
Inte
ract
ion
Bas
esO
nly
Interaction basesNo tops
description type w d h pattern no. painted
Electric adjustable C-leg table base 58� 21� 26� - 42� IB 58SE $2,277.58� 24� 26� - 42� IB 58DE 2,421.
Four star base Adjustable, 30�or 36� dia. 28� 28� 24� - 29� IB 28Y 903.Adjustable, 42� dia. 32� 32� 24� - 29� IB 32Y 1,119.Fixed height 30�or 36� dia. 28� 28� 273/4� IB 28X 615.Fixed height 42� dia. 32� 32� 273/4� IB 32X 832.Fixed height 48� dia. 32� 32� 273/4� IB 48X 962.Fixed height, low rotary 32� 32� 17� IB 32M 722.With casters, 30� or 36� dia. 28� 28� 273/4� IB 28W 652.With casters, 42� dia. 32� 32� 273/4� IB 32W 867.
Column base One leg only 5� 5� 273/4� IBZ 261.
Split-top mechanism 44� IB ST 44 1,011.For 30� straight and 36 x 24� corner 18� IB ST 18 1,011.For 36� straight and 24� corner 22� IB ST 22 1,011.For 42� and 48� straight and 30� corner 28� IB ST 28 1,011.
Electric table memory switch IEC2 106.
Order Code
Example: IB 32X; 117, T4
I InteractionB Base only32 Diameter of baseX Base type117 Base finishT4 Trim ring finish
Specification Information
Pattern number logic:1. Interaction2. Base only3-4. Base size5. Base type
Specify color fields:
Base finishTrim ring finish
Electric bases come with a defaultcolor trim ring.
Application Notes
Interaction bases may be used withexisting or custom size or shapeKnoll systems tops with solid woodcore construction.
T-leg bases support tops from 24� to36�D, centered over 24� feet. Basesfor split top tables have 11�Dcantilever arms (minimum depth ofmonitor surface). Split topmechanism does not include tops.Four star bases are shown with thecorresponding maximum roundtable diameter.
Specify 21�D bases for tops 21�-24�deep. Specify 24�D bases for tops25�-30�D. Tops up to 36�D may besupported on 24�D bases, with 6�overhang at the back of the table.
Table heights and ranges shownabove do not include top thickness.
Adjustable four star base not for usewith tops exceeding 42� in anydimension.
Counterforce base only supportsweight up to 150 lbs.
Split-top mechanisms have a 12�range ( 5 1/2� up and 6 1/2� down )and a plus or minus 15° tilt. 150lbs. lift capacity not including thesurface.
Electric base only supports weightup to 200lbs.
Bases are designed to support topsup to but no more than 16� widerthan the base.
Knoll Office Tables
168
Accessories
description type w d h pattern no. painted
Filler panel for C-leg tables 30� table 22� 2� 15� IFP30 $131.36� table 28� 2� 15� IFP36 144.42� table 34� 2� 15� IFP42 161.48� table 40� 2� 15� IFP48 174.60� or 72� table 52� 2� 15� IFP60 189.
Extender glides, set of 4 – – 1/2� IXG 11.
Casters, set of 4 – – 11/4� IC 35.
Wire manager tray 30� table 21� 4� 3� IWM30 43.36� table 27� 4� 3� IWM36 52.42� table 33� 4� 3� IWM42 58.48� table 39� 4� 3� IWM48 64.60� table 51� 4� 3� IWM60 72.
Order Code
Example: IFP48; 117
I Interaction TableFP Filler panel48 Width117 Finish
Specification Information
Specify paint finish for filler panels.
Note: Filler panels do not work withtop crank or electric adjustablec-leg bases.
Application Notes
Filler panels may be used in fixedor adjustable height C-leg tables toprovide enclosure below horizontalbeam. For full enclosure alsospecify wire manager tray.
For curvilinear corner, hot dog, orsmall boomerang, specify fillerpanel for 36� table. For largeboomerang, specify filler panel for42� table.
Extender glides snap into standardglides or stack to extend levelingrange1/2� for each set ordered.
Locking casters replace standardglides in any Interaction table tofacilitate reconfiguration. Castersraise top height 11/2�.
Wire manager tray attaches underback edge of worksurface to provideadditional wire managementbetween table and panel or wall.
Knoll Office Tables
169
Acc
esso
ries
Introduction to Currents
Currents creates dynamic, advancedperformance work environments fromcoordinated, independent elements –Service Walls, Fence frames, plannabledesks, mobile storage – and existingKnoll office products.
Currents workspaces may bespine-supported or freestanding, orplanned in combination withconventional panel systems.
Knoll Office Tables
170
Introduction to Currents
Currents Service WallsCurrents Service Walls form thestructural core and primary path ofservices distribution for a cluster ofworkstations. Currents Service Wallsmay also create borders for teamworkspaces, conference areas, orcorridors. Service Walls are 5� thick,and are available in three heights:39� for seated visual access; 48� forseated privacy, the most versatileheight for open plan areas requiringsome overhead storage; and 64� forstanding privacy in executive orconference areas.
Service Walls are composed offrames and covers. Frames includestuds on 12� centers, base racewaywith levelling glides, crown andbase. Frames may be specified with1�H compact crown or 4�H standardcrown. All studs have brackets tosupport covers at 5�, 21�, 30�, 39�,48� and 64� above the floor. Crownand raceway covers, structural basecovers from 5� to 21� above the floor,and covers above 21� must bespecified separately.
Structural base covers enableperpendicular panels, worksurfacesupports, or outriggers to be attachedat any point. Structural base coversmay be painted steel, perforated, orupholstered.
Wall covers above 21� snap into wallframe brackets at 12� intervals, andare removable without tools. Coversmay be painted, upholstered,acoustical/tackable upholstered,cable tray, slat wall, or markersurface.
Currents Walls plan in anycombination of 48�, 60� or 72� widthscorresponding to the total length ofWall required. Add outriggers, T-endand L-end panels, or 90° or 120°post connections at each end ofService Wall spine. Straightconnectors are included with eachframe kit to join frames of the sameheight in a straight line. High-lowstraight connectors are availableseparately. Service Walls requireoutriggers or perpendicular systemspanels every 8�.
Power components are specifiedseparately. Knoll universal 2+2 or3+3 power components may beinstalled in the base of the Wall or atworksurface height. Base power railsaccept two duplex outlets on eachside of a panel at raceway height.Desk-height outlet modules accepttwo duplex outlets on each faceabove or below the worksurface. Oneor two modules (four duplex outletseach side) may be located in any 12�wide stud bay. Locate outlet modulesand related 12�W outlet coversbefore specifying widths of adjacentpanel covers.
The interior of the Wall between 21�and the crown offers unobstructed, 1�deep, lay-in cabling on each surface.Vertical wire management and excesscord capability is unobstructed21/2� x 10� between studs.
Service Walls with standard 4�Hcrown enable upmounted shelves,overhead storage cabinets, andcanopy lighting at any point on oneor both sides. Translucent,upholstered or frameless glassadd-up panels fit into a centerchannel anywhere along the crownfor 12�, 21� or 28� of additionalenclosure.
Stackable add-up panels are alsoavailable in translucent, upholstered,marker or glazed surface. First uppanels are 12�, 21� or 28� high; nextup stacking panels are 16� high.
First up panels can be mounted onany 3� increment along Service Wallcrown, or correspond in width tolinkable screens.
Wall mounted componentsWorksurface supports, perpendicularlinkable screens, and systems panelsmay be connected to the CurrentsWall at any point. Mobile screens arealso available, in translucentfiberglass or upholstered surface.
Currents linkable screens, intranslucent, glazed, upholstered ormarker surface, define workstationsand extend the Service Wall horizon.Linkable screens connect in L, T, X,Y and V configurations and acceptstackable add-up panels. First uppanels are 16�, 25� or 32�H. Next uppanels are 16�H.
Currents worksurfaces are designedfor computer use as the primary workactivity. Deep corners are shaped forlarge monitors, and include widekeyboard/mouse areas. Straightworksurfaces feature softly curved orflat fronts. Extended cornersincorporate an adjacent work areaand a computer corner into a single,uninterrupted surface. Universalworksurfaces include a steel stiffenerfor high load capacity and cordmanagement.
Service Walls cantileverworksurfaces up to 24�D, or provideend support for any size worksurface.Support columns, independentC-legs, and floorstanding pedestalsare also available for worksurfacesupport. Cantilevers are adjustablein 1� increments for 24�-34�Hworksurface. End support bracketsand C-legs are fixed height for 28�Hworksurface, or adjust for 24�-34�worksurface height.
Service Wall standard height 4�Hcrowns can upmount open shelves,overhead storage, task and ambientlighting, and add-up panels.
Service Wall standard height 4�Hcrowns can upmount or downmountReuter overhead storage, openshelves, or Equity overhead at anypoint. Reuter storage and Equityoverheads can only be downmountedfrom Walls with 1�H compact crown.Brackets are available to downmountMorrison Options, Series 2 forMorrison, Dividends, Series forDividends or Equity overheadcabinets from 64�H Service Wallwith either compact or standardcrown.
Knoll Office Tables
171
Cur
rent
s
Introdution to Currents
Currents DesksCurrents desks are freestandingfurniture elements optimized for thehigh-mobility, computer-based office.Currents corner desks and mobilepedestals can work together to formefficient, two-element workstations.
Currents desks areheight-adjustable. Pin-set versionhas range of 24� to 30�H in 1�increments. Handcrank version letsthe user adjust continuously from 24�to 34�H. Desks have C-legs for kneeclearance, and have interchangeablerear casters or glides for easymobility.
All desks include horizontal andvertical cable managers.
Desks are available in corner,extended corner, and curved-frontstraight shapes. Worksurface cornersare eased to make alignment ofmobile units less critical.
Desks and wall-mountedworksurfaces accept clamp-onworkshelves. Workshelves provideconvenient binder/book accessadjacent to computer displays.
Currents WorktablesCurrents mobile worktables extendthe worksurface area and provideflexible guest/conference spaces.Rounded corners enable informalplacement near other worksurfaces.All worktables are available withcasters or levelling glides.
Adjustable height worktables adjustfrom 24� to 30� high in 1�increments.
Currents StorageCurrents freestanding storagecomponents are designed formobility and space efficiency.
Pedestals are available mobile orfixed, with 2 files or combination 4�personal, 7� data, and 11� file drawerfronts, fitting below standard 28�worksurface height. Data/file mobilepedestals are low enough to rollunder desks set lower than 28�.Mobile pedestals include top, castersand handle. Fixed pedestals include2� levelling glides.
Reuter vertical storage has a rotatingdoor, shelves and pull-out fileframes, and a wardrobe area. Reuterstorage is 21� wide so open door fitswithin 24� planning footprint.
Reuter vertical storage is available48�H, with painted or worksurfacetop, or 64�H with painted top only.
Knoll Office Tables
172
Currents Color Program
Core finishes
Specify Core finishes for all new customers
Core LegacyWall
covers
Wallends,trim,
bracketsand
outrig-gers
Storagefronts
Storagecases
Work-surfaces
andshelves
Currentsworksur-
faceedges
Currentsfor
Morrisonworksur-
faceedges
Pedestalsand
ReuterOver-head
611 Beige Mist Metallic • • • • P2
118 Bright White • • • • • • P3
112 Brown • • • • P1
123 Brushed Grey •122 Brushed Sand •113 Dark Grey Y3 • • • • P1
128 Fog • •114 Folkstone Grey LA/U • • • • • • P1
111 Jet Black • • • • • • P1
124 Medium Cherry •115 Medium Grey Y2 • • • • P1
612 Medium Metallic Grey J • • • • P2
121 Micro Grey •129 Micro Sand •126 Natural Cherry •125 Natural Maple •119 Pumice F • •116 Sandstone • • • • P1
613 Silver 3 • • • • P3
117 Soft Grey E/M42 • • • • • • P1
813 Trim Grey 5 • •127 Walnut •V1 Maple Techgrain 4/M C6J2 Y821 C6J2
V1 Cherry Techgrain 6/R C6J3 Y831 C6J3
V1 Medium brown mahogany Techgrain 7/I C6J4 C6F3 C6J4
V1 Medium red mahogany Techgrain 8/C C6J5 C6F4 C6J5
V1 American cherry Techgrain 9/P C6J6 C6F5 C6J6
V2 Maple K V316 V316 V316
V2 American cherry X C6F6 C6F6 C6F6
V2 Medium red mahogany Z C6F7 C6F7 C6F7
Default trim information:Trim Grey is the integral color for worksurface, desk and worktable top edge, mobile screens, linkable screen and add-up panel trim, privacy screen and windowtrim, pedestal pulls.Black: wall frames and drawers interior, wall, screen, storage glides and casters.Light grey: Ambient lightsTranslucent crystal: fiberglass surfaces for mobile screens, linkable screens and add-up panelsThe new Core finish 113 Dark Grey is not a match to the Currents Legacy finish NV. It is a match to the Dividends Legacy finish Y3.The new Core finish 115 Medium Grey is not a match to the Currents Legacy finish NJ. It is a match to the Dividends Legacy finish Y2.
Veneer finishes for Currents worksurfaces and storage fronts are available through Custom Product Development.
Knoll Office Tables
173
Cur
rent
s
Currents Legacy Finishes
Work-surfaces
Wall andStructural
Basecovers
CrownCovers
Crown end caps,connectors and
connector top caps,raceway covers,
worksurfacebrackets and
outriggers
Straight legs, C-legs, corner
legs, desk screenclamps,
window frames(textured only)
Storagefronts
StorageCases
Plastic Laminates Light Grey L
Pumice F
Winter grey V
Slate S
Snow B
Folkstone Grey U
Pearwood PA
Fiber E
Sand D
Medium Grey G
Soft grey M42
Wood GrainLaminates
Clear Maple CM
Veneer Group 2 Maple Techgrain® 4 M
Cherry Techgrain® 6 R
Medium brown mahoganyTechgrain®
7 I
Medium red mahoganyTechgrain®
8 C
American cherryTechgrain®
9 P
Veneer Group 3 Maple K K
American cherry X X
Medium red mahogany Z Z
Paint Group 2 Metallic Flint * 2 2 2 2 2 2
Light metallic grey * U U U U U U
Medium metallic grey * J J J J J J
Dark metallic grey * V V V V V V
Light metallic tan * W W W W W W
Metallic beige * H H H H H H
Soft Grey * E E E
Medium Grey (Slate) * Y2 Y2 Y2
Taupe * R R R
Aluminum A
Paint Group 3 Silver * 3 3 3 3 3 3
White * B B B B B B
Specify legacy finishes to match existing product only. Legacy finishes are not available for new customers.
Trim grey is the integral color for worksurface, desk and worktable top edge, mobile screen and add-up panel trim, privacy screen and window trim, pedestal pullsWall, screen and storage glides, glide cones and casters are integral color Black.Wall frames and pedestal drawer interiors are painted Black.Ambient lights are painted Light greyFiberglass surfaces for mobile screens, linkable screens and add-up panels is Translucent crystalLinkable screen feet are painted Trim grey
Note: Add 10% to the list price of any laminate product when specifying a legacy laminate.
Knoll Office Tables
174
Worksurface supportsfreestanding
description type application w d h pattern no. paint
Straight leg Adjustable 2� 4� 23-29� AB1 I27A(G/C) ( ) $364.Fixed 2� 4� 27� AB1 I27F(G/C) ( ) 187.Low 2� 4� 25� AB1 I25(G/C) ( ) 187.
C-leg, adjustable 24�D Left 2� 21� 23-29� AB1 CL24L ( )( ) 403.Right 2� 21� 23-29� AB1 CL24R ( )( ) 403.
30�D Left 2� 27� 23-29� AB1 CL30L ( )( ) 443.Right 2� 27� 23-29� AB1 CL30R ( )( ) 443.
C-leg, fixed height 24�D Left 2� 21� 27� AB1 CLF24L ( )( ) 337.Right 2� 21� 27� AB1 CLF24R ( )( ) 337.
30�D Left 2� 27� 27� AB1 CLF30L ( )( ) 369.Right 2� 27� 27� AB1 CLF30R ( )( ) 369.
Corner leg Corner worksurfaces 4� 4� 23-29� AB1 VL ( )( ) 337.
Order Code
Example: AB1 CL24L 612 G
AB1 SupportCL C-leg24 DepthL Left612 FinishG Glides
Specification Information
Specify painted finishes for supportcolumn, C-leg, and brackets.
C-Leg casters/glides:C Rear casters/front glidesG All glides
Casters/glides combination has nolevelling. All-glides versionprovides 13/4� levelling range.
Application Notes
Specify two straight legs undershared worksurface. Straight legsare fixed at 27�H (28� top height) oradjustable 23�-29� (24�-30� topheight).
C-legs support one end of anycorresponding depth Currentsworksurface. Corner legs supportonly the back corner of a Currentscorner worksurface. Specify C-legsfor side edges of Currents cornerand extended corner worksurfaces.
Adjustable C-legs and corner legsare adjustable in height to supportunderside of worksurface at 1�increments from 23� to 29� (24� to30� Currents top height). Fixedheight C-legs support desk at 28�H.Fixed height C-legs do not acceptservice beams.
Straight legs may not be used withCurrents universal worksurfaces orCurrents worksurfaces for Morrisonto create freestanding tables.
Knoll Office Tables
175
Cur
rent
s
Deskspin-set adjustableextended left
description w (l) w (r) h pattern no. lam.
24�D both sides corner desk, extended left 60� 36� 24-30� AD C53 SF ( )( )( ) $1,850.60� 48� 24-30� AD C54 SF ( )( )( ) 1,989.72� 36� 24-30� AD C63 SF ( )( )( ) 1,989.72� 48� 24-30� AD C64 SF ( )( )( ) 2,124.84� 48� 24-30� AD C74 SF ( )( )( ) 2,261.
30�D left/24�D right corner desk, extended left 60� 48� 24-30� AD C54 LF ( )( )( ) 2,096.72� 48� 24-30� AD C64 LF ( )( )( ) 2,233.84� 48� 24-30� AD C74 LF ( )( )( ) 2,368.
30�D both sides corner desk, extended left 60� 48� 24-30� AD C54 DF ( )( )( ) 2,206.72� 48� 24-30� AD C64 DF ( )( )( ) 2,343.84� 48� 24-30� AD C74 DF ( )( )( ) 2,478.
Order Code
Example: AD C64 LF 117 117 G
AD DeskC Shape6 Width left4 Width rightL Depth (30�D left)F Base type117 Desktop finish117 Desk base finishG Glides
Specification Information
Specify desk shape:C Corner
Width left/width right:3 36�4 48�5 60�6 72�7 84�
Worksurface depth:S 24�D both sidesL 30�D left, 24�D rightR 30�D right, 24�D leftD 30�D both sides
Base type:F Manually adjustable
Specify desk top and base finish.
Veneer finishes for desks areavailable through Custom ProductDevelopment.
Specify glides/casters:C Rear castersG Glides
Worksurface edges are trim grey.
Application Notes
Desks incorporate universalworksurface and adjustable C legs.Pin-set desk surface can be set atinstallation from 24� - 30� high, in1� increments.
Integral cable tray underworksurface and channels in legsprovide basic lay-in wiremanagement.
Extended corner desks providecomputer corner and adjacent workarea in one unit. Nominalworksurface depths include 13/4�cable/connector space along backedges. Clearance underworksurfaces (for pedestals,BackPack or other accessories) is18�.
Desks may be specified with fixedfront glides and rear casters or 13/4�levelling glides. Casters and glidesare interchangeable in the field.
Desks accept clamp-on workshelvesand privacy screens.
Knoll Office Tables
176
Deskspin-set adjustableextended right
description w(l) w(r) h pattern no. lam.
24�D both sides corner desk, extended right 36� 60� 24-30� AD C35 SF ( )( )( ) $1,850.36� 72� 24-30� AD C36 SF ( )( )( ) 1,989.48� 60� 24-30� AD C45 SF ( )( )( ) 1,989.48� 72� 24-30� AD C46 SF ( )( )( ) 2,124.48� 84� 24-30� AD C47 SF ( )( )( ) 2,261.
30�D right/24�D left corner desk, extended right 48� 60� 24-30� AD C45 RF ( )( )( ) 2,096.48� 72� 24-30� AD C46 RF ( )( )( ) 2,233.48� 84� 24-30� AD C47 RF ( )( )( ) 2,368.
30�D both sides 48� 60� 24-30� AD C45 DF ( )( )( ) 2,206.48� 72� 24-30� AD C46 DF ( )( )( ) 2,343.48� 84� 24-30� AD C47 DF ( )( )( ) 2,478.
Order Code
Example: AD C46 SF 117 117 G
AD DeskC Shape4 Width left6 Width rightS Depth (24� both sides)F Base type117 Desktop finish117 Desk base finishG Glides
Specification Information
Specify desk shape:C Corner
Width left/width right:3 36�4 48�5 60�6 72�7 84�
Worksurface depth:S 24�D both sidesL 30�D left, 24�D rightR 30�D right, 24�D leftD 30�D both sides
Base type:F Manually adjustable
Specify desk top and base finish.
Veneer finishes for desks areavailable through Custom ProductDevelopment.
Specify glides/casters:C Rear castersG Glides
Worksurface edges are trim grey.
Application Notes
Desks incorporate universalworksurface and adjustable C legs.Pin-set desk surface can be set atinstallation from 24� - 30� high, in1� increments.
Integral cable tray underworksurface and channels in legsprovide basic lay-in wiremanagement.
Extended corner desks providecomputer corner and adjacent workarea in one unit. Nominalworksurface depths include 13/4�cable/connector space along backedges. Clearance underworksurfaces (for pedestals,BackPack or other accessories) is18�.
Desks may be specified with fixedfront glides and rear casters or 13/4�levelling glides. Casters and glidesare interchangeable in the field.
Desks accept clamp-on workshelvesand privacy screens.
Knoll Office Tables
177
Cur
rent
s
Deskspin-set adjustablecorner desk
description w(l) w(r) h pattern number lam.
24�D both sides corner desk 42� 42� 24-30� AD C4242 SF ( )( )( ) $1,781.48� 48� 24-30� AD C44 SF ( )( )( ) 1,850.60� 60� 24-30� AD C55 SF ( )( )( ) 2,056.
30�D left/24�D right corner desk 42� 42� 24-30� AD C4242 LF ( )( )( ) 1,823.48� 48� 24-30� AD C44 LF ( )( )( ) 1,890.60� 60� 24-30� AD C55 LF ( )( )( ) 2,096.
24�D left/30�D right corner desk 42� 42� 24-30� AD C4242 RF ( )( )( ) 1,823.48� 48� 24-30� AD C44 RF ( )( )( ) 1,890.60� 60� 24-30� AD C55 RF ( )( )( ) 2,096.
30�D both sides corner desk 42� 42� 24-30� AD C4242 DF ( )( )( ) 1,864.48� 48� 24-30� AD C44 DF ( )( )( ) 1,932.60� 60� 24-30� AD C55 DF ( )( )( ) 2,137.
Order Code
Example: AD C44 LF 117 117 G
AD DeskC Shape4 Width left4 Width rightL Depth (30�D left)F Base type117 Desktop finish117 Desk base finishG Glides
Specification Information
Specify desk shape:C Corner
Width left/width right:4 48�5 60�
Worksurface depth:S 24�D both sidesL 30�D left, 24�D rightR 30�D right, 24�D leftD 30�D both sides
Base type:F Manually adjustable
Specify desk top and base finish.
Veneer finishes for desks areavailable through Custom ProductDevelopment.
Specify glides/casters:C Rear castersG Glides
Worksurface edges are trim grey.Clear Maple not available on 60�Wx 60�D corner desks.
Application Notes
Desks incorporate universalworksurface and adjustable C legs.Pin-set desk surface can be set atinstallation from 24� - 30� high, in1� increments.
Corner desks provide up to 45�diagonal depth for large monitors,keyboard and mouse. Nominalworksurface depths include 13/4�cable/connector space along backedge. Clearance under worksurfaces(for pedestals, BackPack or otheraccessories) is 18�.
Desks may be specified with fixedfront glides and rear casters or 13/4�levelling glides. Casters and glidesare interchangeable in the field.
Desks accept clamp-on workshelvesand privacy screens.
Knoll Office Tables
178
Deskspin-set adjustablestraight desk
description w(l) w(r) h pattern number lam.
24�D straight desk, curved front 36� 24� 24-30� AD S36 SF ( )( )( ) $1,151.42� 24� 24-30� AD S42 SF ( )( )( ) 1,180.48� 24� 24-30� AD S48 SF ( )( )( ) 1,204.60� 24� 24-30� AD S60 SF ( )( )( ) 1,260.72� 24� 24-30� AD S72 SF ( )( )( ) 1,316.84� 24� 24-30� AD S84 SF ( )( )( ) 1,369.
30�D straight desk, curved front 36� 30� 24-30� AD S36 DF ( )( )( ) 1,274.42� 30� 24-30� AD S42 DF ( )( )( ) 1,301.48� 30� 24-30� AD S48 DF ( )( )( ) 1,328.60� 30� 24-30� AD S60 DF ( )( )( ) 1,398.72� 30� 24-30� AD S72 DF ( )( )( ) 1,479.
Order Code
Example: AD S48 DF 117 117 G
AD DeskS Shape48 WidthD DepthF Base type117 Desktop finish117 Desk base finishG Glides
Specification Information
Specify desk shape:S Straight
Worksurface depth:S 24�D both sidesD 30�D both sides
Base type:F Manually adjustable
Specify desk top and base finish.
Veneer finishes for desks areavailable through Custom ProductDevelopment.
Specify glides/casters:C Rear castersG Glides
Worksurface edges are trim grey.
Application Notes
Desks incorporate universalworksurface and adjustable C legs.Pin-set desk surface can be set atinstallation from 24� - 30� high, in1� increments.
Straight desks have slightly curvedfront edges, to a maximum of 1�extra depth at the center. Nominalworksurface depths include 13/4�cable/connector space along backedge. Clearance under worksurfaces(for pedestals, BackPack or otheraccessories) is 18�.
Desks may be specified with fixedfront glides and rear casters or 13/4�levelling glides. Casters and glidesare interchangeable in the field.
Desks accept clamp-on workshelvesand privacy screens.
Knoll Office Tables
179
Cur
rent
s
Deskshandcrank adjustableextended left
description w(l) w(r) h pattern no. lam.
24�D both sides corner desk, extended left 60� 36� 24-34� AD C53 SH ( )( )( ) $2,807.60� 48� 24-34� AD C54 SH ( )( )( ) 2,945.72� 36� 24-34� AD C63 SH ( )( )( ) 2,945.72� 48� 24-34� AD C64 SH ( )( )( ) 3,082.84� 48� 24-34� AD C74 SH ( )( )( ) 3,221.
30�D left/24�D right corner desk, extended left 60� 48� 24-34� AD C54 LH ( )( )( ) 3,055.72� 48� 24-34� AD C64 LH ( )( )( ) 3,192.84� 48� 24-34� AD C74 LH ( )( )( ) 3,328.
30�D both sides corner desk, extended left 60� 48� 24-34� AD C54 DH ( )( )( ) 3,055.72� 48� 24-34� AD C64 DH ( )( )( ) 3,192.84� 48� 24-34� AD C74 DH ( )( )( ) 3,328.
Order Code
Example: AD C53 SH 117 117 G
AD DeskC Shape5 Width left3 Width rightS DepthH Base type117 Desktop finish117 Base finishG Glides
Specification Information
Specify desk shape:C Corner
Width left, width right:3 36�4 48�5 60�6 72�7 84�
Worksurface depth:S 24�D both sidesL 30�D left, 24�D rightR 30�D right, 24�D leftD 30�D both sides
Base type:H Handcrank adjustable
Specify desk top and base finish.
Veneer finishes for desks areavailable through Custom ProductDevelopment.
Specify:C Rear castersG Glides
Worksurface edges are trim grey.
Application Notes
Handcrank desks incorporatesynchronized, adjustable C legs andcorner legs. Handcrank mechanismenables user to adjust worksurfacefrom 24� - 34� high (continuous)with collapsible crank under frontedge. Handcrank is located on theextended side of desks.
Integral cable tray underworksurface and channels in legsprovide basic lay-in wiremanagement. Crossbeam stiffenslegs through upper height range.Crossbeam is 4�H, 14� above floor.
Desks may be specified with fixedfront glides and rear casters or 13/4�levelling glides. Casters and glidesare interchangeable in the field.
Extended corner desks providecomputer corner and adjacent workarea in one unit. Nominalworksurface depths include 13/4�cable/connector clearance alongback edge.
Handcrank mechanism is rated at300 lbs. maximum weight.
Desks accept clamp-on workshelvesand privacy screens.
Knoll Office Tables
180
Deskshandcrank adjustableextended right
description w(l) w(r) h pattern no. lam.
24�D both sides corner desk, extended right 36� 60� 24-34� AD C35 SH ( )( )( ) $2,807.36� 72� 24-34� AD C36 SH ( )( )( ) 2,945.48� 60� 24-34� AD C45 SH ( )( )( ) 2,945.48� 72� 24-34� AD C46 SH ( )( )( ) 3,082.48� 84� 24-34� AD C47 SH ( )( )( ) 3,221.
30�D right/24�D left corner desk, extended left 48� 60� 24-34� AD C45 RH ( )( )( ) 3,055.48� 72� 24-34� AD C46 RH ( )( )( ) 3,192.48� 84� 24-34� AD C47 RH ( )( )( ) 3,328.
30�D both sides corner desk, extended left 48� 60� 24-34� AD C45 DH ( )( )( ) 3,055.48� 72� 24-34� AD C46 DH ( )( )( ) 3,192.48� 84� 24-34� AD C47 DH ( )( )( ) 3,328.
Order Code
Example: AD C35 SH 117 117 G
AD DeskC Shape3 Width left5 Width rightS DepthH Base type117 Desktop finish117 Base finishG Glides
Specification Information
Specify desk shape:C Corner
Width left, width right:3 36�4 48�5 60�6 72�7 84�
Worksurface depth:S 24�D both sidesL 30�D left, 24�D rightR 30�D right, 24�D leftD 30�D both sides
Base type:H Handcrank adjustable
Specify desk top and base finish.
Veneer finishes for desks areavailable through Custom ProductDevelopment.
Specify:C Rear castersG Glides
Worksurface edges are trim grey.
Application Notes
Handcrank desks incorporatesynchronized, adjustable C legs andcorner legs. Handcrank mechanismenables user to adjust worksurfacefrom 24� - 34� high (continuous)with collapsible crank under frontedge. Handcrank is located on theextended side of desks.
Integral cable tray underworksurface and channels in legsprovide basic lay-in wiremanagement. Crossbeam stiffenslegs through upper height range.Crossbeam is 4�H, 14� above floor.
Desks may be specified with fixedfront glides and rear casters or 13/4�levelling glides. Casters and glidesare interchangeable in the field.
Extended corner desks providecomputer corner and adjacent workarea in one unit. Nominalworksurface depths include 13/4�cable/connector clearance alongback edge.
Handcrank mechanism is rated at300 lbs. maximum weight.
Desks accept clamp-on workshelvesand privacy screens.
Knoll Office Tables
181
Cur
rent
s
Deskshandcrank adjustablecorner desk
description w(l) w(r) h pattern no. lam.
24�D both sides corner desk 42� 42� 24-34� AD C4242 SH ( )( )( ) $2,689.48� 48� 24-34� AD C44 SH ( )( )( ) 2,807.60� 60� 24-34� AD C55 SH ( )( )( ) 3,012.
30�D left/24�D right corner desk 42� 42� 24-34� AD C4242 LH ( )( )( ) 2,728.48� 48� 24-34� AD C44 LH ( )( )( ) 2,847.60� 60� 24-34� AD C55 LH ( )( )( ) 3,055.
24�D left/30�D right corner desk 42� 42� 24-34� AD C4242 RH ( )( )( ) 2,728.48� 48� 24-34� AD C44 RH ( )( )( ) 2,847.60� 60� 24-34� AD C55 RH ( )( )( ) 3,055.
30�D both sides corner desk 48� 48� 24-34� AD C44 DH ( )( )( ) 2,892.60� 60� 24-34� AD C55 DH ( )( )( ) 3,098.
Order Code
Example: AD C44 SH 117 117 G
AD DeskC Shape4 Width left4 Width rightS DepthH Base type117 Desktop finish117 Base finishG Glides
Specification Information
Specify desk shape:C Corner
Width left, width right:4 48�5 60�
Worksurface depth:S 24�D both sidesL 30�D left, 24�D rightR 30�D right, 24�D leftD 30�D both sides
Base type:H Handcrank adjustable
Specify desk top and base finish.
Veneer finishes for desks areavailable through Custom ProductDevelopment.
Specify:C Rear castersG Glides
Worksurface edges are trim grey.Clear Maple is not available on60�W x 60�D corner desks.
Application Notes
Handcrank desks incorporatesynchronized, adjustable C legs andcorner legs. Handcrank mechanismenables user to adjust worksurfacefrom 24� - 34� high (continuous)with collapsible crank under frontedge.
Desks may be specified with fixedfront glides and rear casters or 13/4�levelling glides. Casters and glidesare interchangeable in the field.Integral cable tray underworksurface and channels in legsprovide basic lay-in wiremanagement.
Corner desks provide up to 45�diagonal depth for large monitors,keyboard and mouse. Nominalworksurface depths include 13/4�cable/connector clearance alongback edge.
Handcrank mechanism is rated at300 lbs. maximum weight.
Desks accept clamp-on workshelvesand privacy screens.
Knoll Office Tables
182
Deskshandcrank adjustablestraight desk
description w(l) w(r) h pattern no. lam.
24�D straight desk, curved front 36� 24� 24-34� AD S36 SH ( )( )( ) $1,834.42� 24� 24-34� AD S42 SH ( )( )( ) 1,863.48� 24� 24-34� AD S48 SH ( )( )( ) 1,890.60� 24� 24-34� AD S60 SH ( )( )( ) 1,945.72� 24� 24-34� AD S72 SH ( )( )( ) 2,000.84� 24� 24-34� AD S84 SH ( )( )( ) 2,056.
30�D straight desk, curved front 36� 30� 24-34� AD S36 DH ( )( )( ) 1,959.42� 30� 24-34� AD S42 DH ( )( )( ) 1,989.48� 30� 24-34� AD S48 DH ( )( )( ) 2,012.60� 30� 24-34� AD S60 DH ( )( )( ) 2,084.72� 30� 24-34� AD S72 DH ( )( )( ) 2,165.
Order Code
Example: AD S48 DH 117 117 G
AD DeskS Shape48 WidthD DepthH Base type117 Desktop finish117 Base finishG Glides
Specification Information
Specify desk shape:S Straight
For straight desks specify:Width:36 36�42 42�48 48�60 60�72 72�84 84�
Worksurface depth:S 24�DD 30�D
Base type:H Handcrank adjustable
Specify desk top and base finish.
Veneer finishes for desks areavailable through Custom ProductDevelopment.
Specify:C Rear castersG Glides
Worksurface edges are trim grey.
Application Notes
Handcrank desks incorporatesynchronized, adjustable C legs andcorner legs. Handcrank mechanismenables user to adjust worksurfacefrom 24� - 34� high (continuous)with collapsible crank under frontedge. Hand crank may be installedon the left or right side of anystraight or symmetrical corner desk.
Desks may be specified with fixedfront glides and rear casters orlevelling glides with 13/4� travel.Integral cable tray underworksurface and channels in legsprovide basic lay-in wiremanagement.
Straight desks have slightly curvedfront edges, to a maximum of 1�extra depth at the center. Nominalworksurface depths include 13/4�cable/connector clearance alongback edge.
Handcrank mechanism is rated at300 lbs. maximum weight.
Desks accept clamp-on workshelvesand privacy screens.
Knoll Office Tables
183
Cur
rent
s
Above-desk storage and lighting for desksworkshelf and T5 task light
description type w d h pattern no. paint Standard Advanced
Workshelf 21� 13� 6� AA1WS24( ) $518.27� 13� 6� AA1WS30( ) 545.33� 13� 6� AA1WS36( ) 574.45� 13� 6� AA1WS48( ) 617.
Workshelf dividers (set of 5) AA1WSD( ) 142.
Task Light Used with 24� and wider workshelf 19� 4� 11/2� AA2T5E19 ( ) 161. n/aUsed with 30� and wider workshelf 25� 4� 11/2� AA2T5E25 ( ) 204. 398.Used with 48� and wider workshelf 37� 4� 11/2� AA2T5E37 ( ) 227. 435.
Order Code
Example: AA1 WS24 117
AA1 AccessoryWS Workshelf24 Width117 Finish
Specification Information
Specify painted finishes for workshelfand dividers.
Specify:
Width - Task Lights mount incabinets and shelves at least 6�wider than light width.
Type:S StandardA Advanced
Specify suffix -CH and add $45 listfor City of Chicago installations.Example: AA2T5E19S-CH
All housings are black.
Application Notes
Workshelf mounts anywhere alongback of desk independent of privacyscreens. Workshelf includesuprights and clamps for Currents,Equity, or Morrison, Reff orDividends Horizon 11/4�worksurfaces.
Task lights mount into the recess inthe underside of overhead cabinetsand shelves at least 6� wider thantask light width.
Task lights include T5 cool white(4100K) fluorescent lamp,electronic ballast, 9� groundedcorset, prismatic lens, rockerswitch, one cord exit managementclip and mounting hardware.
Task light cordset is center exit. Onsmaller units cord exit is off-center,but still not handed.
Task lights are TCLP compliant andmeet requirements of CaliforniaTitle 24.
Advanced task lights are fitted withballast and lamp compliant withLEED requirements.
Knoll Office Tables
184
Worktablespersonal, tripod, wiper
description type w d h pattern no. lam.
Personal worktable Adjustable 36� 28� 24-30� AT1 P36A ( )( )( ) $1,344.Fixed height 36� 28� 28� AT1 P36F ( )( )( ) 1,142.
Tripod worktable Adjustable 36� 36� 24-30� AT1 TA ( )( ) 1,646.Fixed height (low) 36� 36� 26� AT1 TL ( )( )( ) 1,142.
Small wiper Adjustable 47� 30� 24-30� AT1 W24A ( )( )( ) 1,814.Fixed height 47� 30� 28� AT1 W24F ( )( )( ) 1,142.
Order Code
Example: AT1 W24F 117 117 C
AT1 TableW Shape24 DepthF Base type117 Desktop finish117 Base finishC Casters
Specification Information
F Fixed heightA Adjustable height
Specify top and base finish.
Veneer finishes for worktables areavailable through Custom ProductDevelopment.
Specify:C CastersG Glides
Fixed height tables are 28�H exceptTripod, 26�H. Adjustable heightworktables adjust 24�-30�H inone-inch increments. Glides adjust13/4�. All casters are lockable.Worktable top edge is trim grey.
Application Notes
Worktables are independent, mobiletables designed for use with desksand panel-mounted worksurfaces.
Personal worktable is roundedrectangle shape, sized to fit withinsmall workstations. Personalworktable has center column,four-star base for clear knee spacesupport.
Tripod is rounded triangle shapedesigned to roll under Currents 48�corner desks set at 28�H.
Small wiper and half wiper areconference extensions for 24�Dworksurfaces. Medium wipercorresponds to 30�D worksurfaces.
Wiper and half wiper tables havefour legs with integral wire-managerchannels.
Knoll Office Tables
185
Cur
rent
s
Worktablespersonal, tripod, wiper
description type w d h pattern no. lam.
Medium wiper Adjustable 54� 30� 24-30� AT1 W30A ( )( )( ) $1,880.Fixed height 54� 30� 28� AT1 W30F ( )( )( ) 1,208.
Half wiper end table
right
Left, adjustable 33� 36� 24-30� AT1 E24LA ( )( )( ) 1,814.Left, fixed height 33� 36� 28� AT1 E24LF ( )( )( ) 1,142.Right, adjustable 33� 36� 24-30� AT1 E24RA ( )( )( ) 1,814.Right, fixed height 33� 36� 28� AT1 E24RF ( )( )( ) 1,142.
Order Code
Example: AT1 W24F 117 117 C
AT1 TableW Shape24 DepthF Base type117 Desktop finish117 Base finishC Casters
Specification Information
F Fixed heightA Adjustable height
Specify top and base finish.
Veneer finishes for worktables areavailable through Custom ProductDevelopment.
Specify:C CastersG Glides
Fixed height tables are 28�H exceptTripod, 26�H. Adjustable heightworktables adjust 24�-30�H inone-inch increments. Glides adjust13/4�. All casters are lockable.Worktable top edge is trim grey.
Application Notes
Worktables are independent, mobiletables designed for use with desksand panel-mounted worksurfaces.
Personal worktable is roundedrectangle shape, sized to fit withinsmall workstations. Personalworktable has center column,four-star base for clear knee spacesupport.
Tripod is rounded triangle shapedesigned to roll under Currents 48�corner desks set at 28�H.
Small wiper and half wiper areconference extensions for 24�Dworksurfaces. Medium wipercorresponds to 30�D worksurfaces.
Wiper and half wiper tables havefour legs with integral wire-managerchannels.
Knoll Office Tables
186
Worktableshalf-round, large wiper, round
description type w d h pattern no. lam.
Half round worktable Adjustable 50� 28� 24-30� AT1 D50A ( )( )( ) $1,546.Fixed height 50� 28� 28� AT1 D50F ( )( )( ) 1,344.
Large half round worktable Adjustable 62� 30� 24-30� AT1 D62A ( )( )( ) 2,015.Fixed height 62� 30� 28� AT1 D62F ( )( )( ) 1,344.
Large wiper end table Adjustable 72� 32� 24-30� AT1 W50A ( )( )( ) 2,015.Fixed height 72� 32� 28� AT1 W50F ( )( )( ) 1,344.
Round worktable Adjustable 42� 24-30� AT1 R42A ( )( )( ) 1,880.Adjustable 48� 24-30� AT1 R48A ( )( )( ) 1,951.Fixed height 42� 28� AT1 R42F ( )( )( ) 1,208.Fixed height 48� 28� AT1 R48F ( )( )( ) 1,277.
Order Code
Example: AT1 D50F 117 117 C
AT1 TableD Shape50 DepthF Base type117 Desktop finish117 Base finishC Casters
Specification Information
F Fixed heightA Adjustable height
Specify top and base finish.
Veneer finishes for worktables areavailable through Custom ProductDevelopment.
Specify:
C CastersG Glides
Fixed height tables are 28�H.Adjustable height worktables adjust24�-30�H in one-inch increments.Glides adjust 13/4�. Worktable topedge is trim grey.
Application Notes
Worktables are independent, mobiletables designed for use with desksand panel-mounted worksurfaces.
Half round worktable aligns withback-to-back 24�D Currents desksor worksurfaces plus a Currentsscreen or Knoll systems panelbetween. Large half round tablealigns with back-to-back 30�Ddesks or worksurfaces. Large wiperis shared conference extension forback-to-back 24�D desks. All tableshave center edge offset to clearpanel end trim.
Large half-round, round, and wipertables have four legs with integralwire-manager channels. Half roundworktable has center column,three-star base for clear knee spacesupport.
Knoll Office Tables
187
Cur
rent
s
Introduction to Upstart
Knoll Upstart is a collection of tables, screensand services distribution components forcomputer-intensive, active, and open workenvironments.
Upstart plans as single-surface, L- or U-shapeworkstations, or freestanding worktables incombination with other systems furniture. Tablesare available on casters or glides and areadjustable in height.
Original Upstart tops have a plastic laminatesurface with a continuous T-mold edge. Thecorners of Original Upstart tops are rounded.Original Upstart legs are curved.
New Plannable Upstart tops have a plasticlaminate or Veneer surface with a T-mold edge onthe front and a thin edgeband on the sides andback. The corners of Plannable Upstart tops are90 degrees and allow two tables to meet at rightangles. Plannable Upstart legs are straight.
Complementary products include Currentsworkshelves, which clamp on to Upstart tables,mobile screens, linkable screens and ServiceWall, monitor supports and desktop accessories.Consult the Currents and KnollExtra price listsfor product details and pricing.
ScreensUpstart screens mount to the back edge ofOriginal Upstart tables to provide seated visualprivacy at a horizon of 39 or 48 inches. UpstartScreens are available in translucent or markersurface, and may be combined with magnet rail.
Plannable Upstart tables use Morrison Networkupholstered screens, which are available in avariety of sizes.
Accessories
Flat BracketBracket joins 2-legged table to another Upstarttable at same height.
Cable TrayCable tray adds on to worksurface stiffener tocontrol cable bundles and power strips (wherepermitted by code).
Pencil DrawerPencil drawer attaches to the underside of aworksurface at any location.
Important Note: Plannable Upstart straightlegs may not be used with Original Upstarttops due to stability issues.
Note to Knoll Dealer Sellers:
The products contained in this price list are alsoavailable through the Knoll Essentials program,with limited exceptions. For additionalinformation, please contact your customer servicerepresentative or visit Knoll Exchange.
Primary and Secondary Worksurfaces
Original Upstart
Rectangular table desk/Return
Corner table desk, 120°
Extended Corner table desk
Y-shape table desk, M-shape table desk
Conference Worksurfaces
Original Upstart
Round, Half round table desk
Oval table desk
Wiper table desk, Tripod table
48 x 24 Original Upstart
221/4�
48�
New Plannable Upstart
Rectangular table desk/Return
Corner table desk, 90°
Extended Corner table desk
P-shape table desk
New Plannable Upstart
Half round table desk
48 x 24 Plannable Upstart
235/8�
48�
Knoll Office Tables
188
Original Upstart Planning Examples
Basic stand-alone Y desk
• the core Upstart application• 30� x 72� nominal shown;
conference depth isapproximately 36�
Y desk with 42� round table
• conference table
Y desk with tripod table
• 30� x 72� Y desk, work shelf,and mobile pedestal
Dual-monitor M desk with tripod table
• 30� x 72� nominal M desk
Oval table with Y desk
• 36� x 66� oval table• 30� x 72� Y return
Rectangular table withbracketed return surface
• 72� x 76� approximatefootprint
• optional work shelf
Dual-monitor M deskworkstation
• 72� x 100� approximatefootprint
• optional work shelf• flat ends allow placement
along wall
Curved wiper with Y desk
• wiper 66� W• 30� x 72� Y return
Y and M back-to-back, with42� conference tables
Y desks back-to-back, withhalf-round shared table
• please note 1.75� setbackfrom the back edge ofeach top to module line,same as Currents desks.
Knoll Office Tables
189
Ups
tart
Original Upstart Planning Examples
Y desk with Upstart storage• 72� x 96� footprint• 72� table with screen• mobile pedestal and tower
Extended corner desk and adjacent worktable• 72� x 96� footprint• 72� x 48� corner and 48� straight desks• mobile pedestal and privacy screen
U-shape plannable desks• 96� x 96� footprint• two 48� x 72� extended corners• mobile pedestal and tower• 72� privacy screen
Extended corner desk and tower• 72� x 72� footprint• 48� and 72� screens• mobile pedestal and tower
Upstart 120 planning• group of three 120° corners• 48� shared privacy screens• mobile pedestals
Upstart work group• 120° corners and shared worktable 48 x 24�• mobile pedestals and towers• 48� privacy screens
Knoll Office Tables
190
Knoll Color ProgramUpstart Finishes
Core finishes
Specify Core finishes for all new customers
Core Legacy
Table legs,screen
brackets,magnet rail
UpstartWorksurfaces
PlannableUpstart
Worksurfaces
UpstartWorksurface
edges
PlannableUpstart
Worksurfaceedges
611 Beige Mist Metallic •118 Bright White • • • • •112 Brown •123 Brushed Grey • •122 Brushed Sand • •113 Dark Grey Y3 •128 Fog • • • •114 Folkstone Grey LA/U • • • • •111 Jet Black • • • • •124 Medium Cherry • •115 Medium Grey Y2 •612 Medium Metallic Grey J •121 Micro Grey • •129 Micro Sand • •126 Natural Cherry • •125 Natural Maple • •119 Pumice F • • • •116 Sandstone •613 Silver 3 •117 Soft Grey E/M42 • • • • •813 Trim grey 5 • •127 Walnut • •
Translucent orange O •Translucent blue P •Frosty white W •Light grey (integral) U
Glider grey (integral) G1
Y821 Maple Techgrain� 4/M •Y831 Cherry Techgrain� 6/R •C6F3 Med. brown mahoganyTechgrain� 7/I •C6F4 Med. red mahogany Techgrain� 8/C •C6F5 American cherry Techgrain� 9/P •V316 Maple K
C6F6 American cherry X
C6F7 Medium red mahogany Z
Default trim information:Trim Grey is the integral color for caster and glide leg levellers and screen cornersBlack: flat bracket, cable tray and castersScreen available in Ribbed Polycarbonate or Marker surface
Veneer finishes for Plannable Upstart worksurfaces are available through Custom Product Development.
For Plannable Upstart Veneer Group 1, only black or trim grey edgebands can be specified.Translucent orange, Translucent blue, and Frosty white edgebands are not available for Plannable Upstart tables.
Knoll Office Tables
191
Ups
tart
Upstart Legacy Finishes
Specify Legacy Finishes for existing customers only. Legacy Finishes are not available for new customers.
Table legs, screen brackets,magnet rail Worksurfaces and shelves Worksurface edges
B Snow •L Light grey • •E Fiber •V Winter grey •S Slate •F Pumice • •U Folkstone grey • •
M42 Soft grey • •D Sand • •
CM Clear Maple •PA Pearwood •
WM Warm Cherry •5 Trim grey •N Black •O Translucent orange •P Translucent blue •W Frosty white •N2 Flint
NU Light grey
NJ Medium grey
NV Dark grey
NW Light Tan
NH Beige
3 Silver •B White •2 Metallic flint •U Light metallic grey •J Medium metallic grey •V Dark metallic grey •H Metallic beige •W Light metallic tan •E Soft grey •M Maple Techgrain�
R Cherry Techgrain�
C Med. red mahogany Techgrain�
P American cherry Techgrain�
K Maple
X American cherry
Z Medium red mahogany
U Light grey (integral)
G1 Glider grey (integral)
Default trim information:Trim Grey is the integral color for caster and glide leg levellers and screen cornersBlack: flat bracket, cable tray and castersScreen available in Ribbed Polycarbonate or Marker surface
For Plannable Upstart Veneer Group 1, only black or trim grey edgebands can be specified.Translucent orange, Translucent blue, and Frosty white edgebands are not available for Plannable Upstart tables.
NOTE: Add 10% to the list price of any laminate product when specifying a legacy laminate.
Knoll Office Tables
192
Upstart Tablesprimary worksurfacestable desks
type application w d h pattern no. list price
Y-shape table desk, curved end (left hand shown) left 72� 28-36� 25-30� AUP Y72DCL4 ( )( )( )( ) $873.right 72� 28-36� 25-30� AUP Y72DCR4 ( )( )( )( ) 873.
M-shape table desk, curved ends 72� 30-36� 25-30� AUP M72DC4 ( )( )( )( ) 873.
Y-shape table desk, flat ends left 72� 28-36� 25-30� AUP Y72DFL4 ( )( )( )( ) 873.right 72� 28-36� 25-30� AUP Y72DFR4 ( )( )( )( ) 873.
M-shape table desk, flat ends 72� 31-36� 25-30� AUP M72DF4 ( )( )( )( ) 873.
Order Code
Example: AUP Y72DCL4 117 117117 G
A CurrentsUP UpstartY Table shape72 WidthD DepthC Curved endL Left hand4 Leg quantity117 Top finish117 Edge finish117 Leg finishG Glides
Specification Information
Specify top, edge and leg finishes.
Casters/glidesC CastersG Glides
Upstart Y and M shape tablesinclude a worksurface stiffener thatdoubles as a horizontal cablemanager.
Suspended pedestal may not beused on Upstart tables.
Application Notes
Upstart Y and M shape tablescombine computer support andadjacent work area in a basic tabledesk.
Curved end tops facilitateconferencing in open planning. Flatends plan close to system panels.Overall width is the same for curvedand flat end tops.
Upstart tops have plastic laminatesurface with continuous T-moldedge.
Upstart tables have four legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 25-30� for glides and27-31� for casters.
Adjustment range enables Upstarttables to overlap or slide underadjacent tables and worksurfaces.
Knoll Office Tables
193
Ups
tart
Upstart Tablesprimary worksurfacescorner table desks
type w d h pattern no. list price
Extended corner table desk, 90° extended left 72� 48� 25-30� AUP C7248S5 ( )( )( )( ) $998.
Extended corner table desk, 90° extended right 48� 72� 25-30� AUP C4872S5 ( )( )( )( ) 998.
Corner table desk, 120° 48�, 48� 22� 25-30� AUP V48S5 ( )( )( )( ) 936.
Order Code
Example: AUP C7248S5 117 117117 C
A CurrentsUP UpstartC Table shape72 Width, extended left48 WidthS Depth4 Leg quantity117 Top finish117 Edge finish117 Leg finishC Casters
Specification Information
Specify top, edge and leg finishes.
Casters/glidesC CastersG Glides
Upstart extended corner and cornershape tables include worksurfacestiffeners that double as horizontalcable managers.
Suspended pedestal may not beused on Upstart tables.
Application Notes
Upstart extended corner and cornershape tables combine computersupport and adjacent work area in abasic table desk.
Upstart tops have plastic laminatesurface with continuous T-moldedge.
Upstart tables have four or five legswith 5� adjustable leveler glides or4� adjustable casters. Adjustmentrange is 25-30� for glides and27-31� for casters.
Adjustment range enables Upstarttables to overlap or slide underadjacent worksurfaces.
Extended corner table desks and120° corner table desk are 22� deepon each side edge. Each back edgeof 120° corner desk corresponds to48� wide Currents linkable screensconnected at a 120° angle.
Knoll Office Tables
194
Upstart Tablessecondary worksurfaces
type w d h pattern no. list price
Rectangular table desk, four legs 48� 22� 25-30� AUP S48S4 ( )( )( )( ) $561.48� 28� 25-30� AUP S48D4 ( )( )( )( ) 624.60� 28� 25-30� AUP S60D4 ( )( )( )( ) 687.72� 28� 25-30� AUP S72D4 ( )( )( )( ) 718.72� 36� 25-30� AUP S72E4 ( )( )( )( ) 749.
Rectangular return, two legs 48� 22� 25-30� AUP S48S2 ( )( )( )G 437.
Order Code
Example: AUP S72E4 117 117 117C
A CurrentsUP UpstartS Table shape72 WidthE Depth4 Leg quantity117 Top finish117 Edge finish117 Leg finishC Casters
Specification Information
Specify top, edge and leg finishes.
Casters/glides
C CastersG Glides
Upstart rectangular and rectangularreturn include a worksurfacestiffener that doubles as a horizontalcable manager.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Upstart tops have plastic laminatesurface with continuous T-moldedge.
Upstart tables have four or five legswith 5� adjustable leveler glides or4� adjustable casters. Adjustmentrange is 25-30� for glides and27-31� for casters.
Adjustment range enables Upstarttables to overlap or slide underadjacent worksurfaces.
Rectangular return with two legsincludes flat bracket for attachmentto primary worksurface at rightangle.
Knoll Office Tables
195
Ups
tart
Upstart Tablesconference worksurfaces
type w d h pattern no. list price
Wiper table desk 61� 321/2� 25-30� AUP W60D4 ( )( )( )( ) $687.
Oval table desk, four legs 66� 36� 25-30� AUP O664 ( )( )( )( ) 873.
Round table desk, four legs 42� 25-30� AUP R424 ( )( )( )( ) 650.
Half round table desk, four legs 62� 30� 25-30� AUP D624( )( )( )( ) 687.
Tripod table, three legs 36� 36� 25-30� AUP T363( )( )( )( ) 561.
Order Code
Example: AUP O664 117 117 117G
A CurrentsUP UpstartO Table shape66 Size4 Leg quantity117 Top finish117 Edge finish117 Leg finishG Glides
Specification Information
Specify top, edge and leg finishes.
Casters/glidesC CastersG Glides
Upstart wiper, oval and half roundtables include a worksurfacestiffener that doubles as a horizontalcable manager.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Upstart conference table desks aredesigned to support conferencework in combination with otherworktables or systems furniture.
Upstart tops have plastic laminatesurface with continuous T-moldedge.
Upstart tables have four legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 25-30� for glides and27-31� for casters.
Tops adjust in height to permitconference tops to overlap or rollunder adjacent tables.
Half round corresponds toback-to-back Y-shape tables or 30�deep straight tables.
Knoll Office Tables
196
Upstart Tablescurved leg only
description h pattern no. Paint
Curved leg with glide 237/8� - 287/8� AUPCGV ( ) $90.
Curved leg with caster 257/8� - 297/8� AUPCCV ( ) 90.
Order Code
Example: AUPCC 114
A CurrentsUP UpstartC Curved legC Casters114 Leg finish
Specification Information
Specify:
Casters/glidesC CastersG Glides
Leg finishes, paintSee Color Program Page
Application Notes
Each curved Upstart leg comes withfour (4) metal inserts and four (4)screws.
When creating a freestanding tableusing Upstart legs, Upstart legsmust be attached using metalinserts.
Curved Upstart legs must bepositioned in accordance withBIFMA guidelines.
Upstart tables have four or fivecurved legs with 5� adjustableleveler glides or 4� adjustablecasters. Adjustment range is 27� -31� for casters and 25� - 30� forglides.
Knoll Office Tables
197
Ups
tart
Plannable Upstart TablesRectangular Table Desk
description w d h pattern no. lam.
24� D 30� 235/8� 273/4� - 323/4� AUPM S30S4 ( ) G ( )( )( ) $448.36� 235/8� 273/4� - 323/4� AUPM S36S4 ( ) G ( )( )( ) 472.42� 235/8� 273/4� - 323/4� AUPM S42S4 ( ) G ( )( )( ) 499.48� 235/8� 273/4� - 323/4� AUPM S48S4 ( ) G ( )( )( ) 524.54� 235/8� 273/4� - 323/4� AUPM S54S4 ( ) G ( )( )( ) 548.60� 235/8� 273/4� - 323/4� AUPM S60S4 ( ) G ( )( )( ) 574.66� 235/8� 273/4� - 323/4� AUPM S66S4 ( ) G ( )( )( ) 601.72� 235/8� 273/4� - 323/4� AUPM S72S4 ( ) G ( )( )( ) 626.84� 235/8� 273/4� - 323/4� AUPM S84S4 ( ) G ( )( )( ) 677.
30� D 30� 295/8� 273/4� - 323/4� AUPM S30D4 ( ) G ( )( )( ) 505.36� 295/8� 273/4� - 323/4� AUPM S36D4 ( ) G ( )( )( ) 532.42� 295/8� 273/4� - 323/4� AUPM S42D4 ( ) G ( )( )( ) 558.48� 295/8� 273/4� - 323/4� AUPM S48D4 ( ) ( ) ( )( )( ) 582.54� 295/8� 273/4� - 323/4� AUPM S54D4 ( ) ( ) ( )( )( ) 613.60� 295/8� 273/4� - 323/4� AUPM S60D4 ( ) ( ) ( )( )( ) 640.66� 295/8� 273/4� - 323/4� AUPM S66D4 ( ) ( ) ( )( )( ) 654.72� 295/8� 273/4� - 323/4� AUPM S72D4 ( ) ( ) ( )( )( ) 668.84� 295/8� 273/4� - 323/4� AUPM S84D4 ( ) ( ) ( )( )( ) 744.
Order Code
Example: AUPM S72S4 AG 118114 114
A CurrentsUP UpstartM PlannableS Table Shape72 WidthS Depth4 Leg quantityA GrommetG Glides118 Top finish114 Edge finish114 Leg finish
Specification Information
Specify:
Grommet/No grommetA GrommetB No grommet
Casters/glidesC CastersG Glides
Top finish, plastic laminatesSee Color Program Page
Veneer Group 1See Color Program Page. Veneerfinishes are available throughCustom Product Development.
Edge finishes, T-moldSee Color Program Page
Leg finishes, paintSee Color Program Page
24� deep rectangular table deskscan only be ordered with glides.30� deep rectangular table desks in30�, 36� and 42� width can only beordered with glides.
For Veneer Group 1, only black ortrim grey edgebands can bespecified.
Translucent orange, Translucentblue and Frosty white edgebandsare not available on PlannableUpstart tables.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Plannable Upstart tops have flatfronts allowing 2 tables to meet atright angles.
Plannable Upstart tables have fouror five straight legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 273/4� - 313/4� for castersand 273/4� - 323/4� for glides.
Rectangular return with two legsincludes flat bracket for attachmentto primary worksurfaces at rightangle.
Plannable Upstart rectangular andrectangular return include aworksurface stiffener that doublesas a horizontal cable manager.
Knoll Office Tables
198
Plannable Upstart TablesRectangular Return
description w d h pattern no. lam.
24� D 36� 235/8� 273/4� - 323/4� AUPM S36S2 ( )( )( )( )( ) $356.42� 235/8� 273/4� - 323/4� AUPM S42S2 ( )( )( )( )( ) 383.48� 235/8� 273/4� - 323/4� AUPM S48S2 ( )( )( )( )( ) 407.60� 235/8� 273/4� - 323/4� AUPM S60S2 ( )( )( )( )( ) 492.
Order Code
Example: AUPM S36S2 AC 118114 114
A CurrentsUP UpstartM PlannableS Table Shape36 WidthS Depth2 Leg quantityA GrommetC Casters118 Top finish114 Edge finish114 Leg finish
Specification Information
Specify:
Grommet/No grommetA GrommetB No grommet
Casters/glidesC CastersG Glides
Top finish, plastic laminatesSee Color Program Page
Veneer Group 1See Color Program Page. Veneerfinishes are available throughCustom Product Development.
Edge finishes, T-moldSee Color Program Page
Leg finishes, paintSee Color Program Page
For Veneer Group 1, only black ortrim grey edgebands can bespecified.
Translucent orange, Translucentblue and Frosty white edgebandsare not available on PlannableUpstart tables.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Plannable Upstart tops have flatfronts allowing 2 tables to meet atright angles.
Plannable Upstart tables have fouror five straight legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 273/4� - 313/4� for castersand 273/4� - 323/4� for glides.
Rectangular return with two legsincludes flat bracket for attachmentto primary worksurfaces at rightangle.
Plannable Upstart rectangular andrectangular return include aworksurface stiffener that doublesas a horizontal cable manager.
Knoll Office Tables
199
Ups
tart
Plannable Upstart Tablescorner
description w d h pattern no. lam.
24� D both sides corner worksurfaces 42� 42� 273/4� - 323/4� AUPM C4242S5 ( )( )( )( )( ) $766.48� 48� 273/4� - 323/4� AUPM C4848S5 ( )( )( )( )( ) 828.60� 60� 273/4� - 323/4� AUPM C6060S5 ( ) C ( )( )( ) 1,080.
30� D both sides corner worksurfaces 42� 42� 273/4� - 323/4� AUPM C4242D5 ( )( )( )( )( ) 809.48� 48� 273/4� - 323/4� AUPM C4848D5 ( )( )( )( )( ) 871.60� 60� 273/4� - 323/4� AUPM C6060D5 ( ) C ( )( )( ) 1,123.
Order Code
Example: AUPM C4242S5 AC 118114 114
A CurrentsUP UpstartM PlannableC Table Shape4242 WidthS Depth5 Leg quantityA GrommetC Casters118 Top finish114 Edge finish114 Leg finish
Specification Information
Specify:
Grommet/No grommetA GrommetB No grommet
Casters/glidesC CastersG Glides
Top finish, plastic laminatesSee Color Program Page
Veneer Group 1See Color Program Page. Veneerfinishes are available throughCustom Product Development.
Edge finishes, T-moldSee Color Program Page
Leg finishes, paintSee Color Program Page
For Veneer Group 1, only black ortrim grey edgebands can bespecified.
Translucent orange, Translucentblue and Frosty white edgebandsare not available on PlannableUpstart tables.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Plannable Upstart tops have flatfronts allowing 2 tables to meet atright angles.
Plannable Upstart tables have fouror five straight legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 273/4� - 313/4� for castersand 273/4� - 323/4� for glides.
Rectangular return with two legsincludes flat bracket for attachmentto primary worksurfaces at rightangle.
Plannable Upstart corner andextended corner includeworksurface stiffeners that doubleas horizontal cable managers.
Knoll Office Tables
200
Plannable Upstart Tablesextended cornerextended left
description w d h pattern no. lam.
24� D both sides corner worksurface,extended left
60� 36� 273/4� - 323/4� AUPM C6036S5 ( )( )( )( )( ) $678.60� 42� 273/4� - 323/4� AUPM C6042S5 ( )( )( )( )( ) 740.60� 48� 273/4� - 323/4� AUPM C6048S5 ( ) C ( )( )( ) 804.72� 36� 273/4� - 323/4� AUPM C7236S5 ( )( )( )( )( ) 804.72� 42� 273/4� - 323/4� AUPM C7242S5 ( ) C ( )( )( ) 867.72� 48� 273/4� - 323/4� AUPM C7248S5 ( ) C ( )( )( ) 930.84� 48� 273/4� - 323/4� AUPM C8448S5 ( ) C ( )( )( ) 1,055.
30� D both sides corner worksurface,extended left
60� 48� 273/4� - 323/4� AUPM C6048D5 ( ) C ( )( )( ) 868.72� 48� 273/4� - 323/4� AUPM C7248D5 ( ) C ( )( )( ) 992.84� 48� 273/4� - 323/4� AUPM C8448D5 ( ) C ( )( )( ) 1,119.
30� D left/24� D right corner worksurface,extended left
60� 42� 273/4� - 323/4� AUPM C6042L5 ( ) C ( )( )( ) 804.60� 48� 273/4� - 323/4� AUPM C6048L5 ( ) C ( )( )( ) 868.72� 42� 273/4� - 323/4� AUPM C7242L5 ( ) C ( )( )( ) 930.72� 48� 273/4� - 323/4� AUPM C7248L5 ( ) C ( )( )( ) 992.84� 48� 273/4� - 323/4� AUPM C8448L5 ( ) C ( )( )( ) 1,119.
Order Code
Example: AUPM C7236S5 AC 118114 114
A CurrentsUP UpstartM PlannableC Table Shape7236 WidthS Depth5 Leg quantityA GrommetC Casters118 Top finish114 Edge finish114 Leg finish
Specification Information
Specify:
Grommet/No grommetA GrommetB No grommet
Casters/glidesC CastersG Glides
Top finish, plastic laminatesSee Color Program Page
Veneer Group 1See Color Program Page. Veneerfinishes are available throughCustom Product Development.
Edge finishes, T-moldSee Color Program Page
Leg finishes, paintSee Color Program Page
For Veneer Group 1, only black ortrim grey edgebands can bespecified.
Translucent orange, Translucentblue and Frosty white edgebandsare not available on PlannableUpstart tables.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Plannable Upstart tops have flatfronts allowing 2 tables to meet atright angles.
Plannable Upstart tables have fouror five straight legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 273/4� - 313/4� for castersand 273/4� - 323/4� for glides.
Rectangular return with two legsincludes flat bracket for attachmentto primary worksurfaces at rightangle.
Plannable Upstart corner andextended corner includeworksurface stiffeners that doubleas horizontal cable managers.
Knoll Office Tables
201
Ups
tart
Plannable Upstart Tablesextended cornerextended left
description w d h pattern no. lam.
24� D left/30� D right corner worksurface,extended left
60� 42� 273/4� - 323/4� AUPM C6042R5 ( ) C ( )( )( ) $804.60� 48� 273/4� - 323/4� AUPM C6048R5 ( ) C ( )( )( ) 868.72� 42� 273/4� - 323/4� AUPM C7242R5 ( ) C ( )( )( ) 930.72� 48� 273/4� - 323/4� AUPM C7248R5 ( ) C ( )( )( ) 992.84� 48� 273/4� - 323/4� AUPM C8448R5 ( ) C ( )( )( ) 1,119.
Order Code
Example: AUPM C7236S5 AC 118114 114
A CurrentsUP UpstartM PlannableC Table Shape7236 WidthS Depth5 Leg quantityA GrommetC Casters118 Top finish114 Edge finish114 Leg finish
Specification Information
Specify:
Grommet/No grommetA GrommetB No grommet
Casters/glidesC CastersG Glides
Top finish, plastic laminatesSee Color Program Page
Veneer Group 1See Color Program Page. Veneerfinishes are available throughCustom Product Development.
Edge finishes, T-moldSee Color Program Page
Leg finishes, paintSee Color Program Page
For Veneer Group 1, only black ortrim grey edgebands can bespecified.
Translucent orange, Translucentblue and Frosty white edgebandsare not available on PlannableUpstart tables.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Plannable Upstart tops have flatfronts allowing 2 tables to meet atright angles.
Plannable Upstart tables have fouror five straight legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 273/4� - 313/4� for castersand 273/4� - 323/4� for glides.
Rectangular return with two legsincludes flat bracket for attachmentto primary worksurfaces at rightangle.
Plannable Upstart corner andextended corner includeworksurface stiffeners that doubleas horizontal cable managers.
Knoll Office Tables
202
Plannable Upstart Tablesextended cornerextended right
description w d h pattern no. lam.
24� D both sides corner worksurface,extended right
36� 60� 273/4� - 323/4� AUPM C3660S5 ( )( )( )( )( ) $678.36� 72� 273/4� - 323/4� AUPM C3672S5 ( )( )( )( )( ) 804.42� 60� 273/4� - 323/4� AUPM C4260S5 ( )( )( )( )( ) 740.42� 72� 273/4� - 323/4� AUPM C4272S5 ( ) C ( )( )( ) 867.48� 60� 273/4� - 323/4� AUPM C4860S5 ( ) C ( )( )( ) 804.48� 72� 273/4� - 323/4� AUPM C4872S5 ( ) C ( )( )( ) 930.48� 84� 273/4� - 323/4� AUPM C4884S5 ( ) C ( )( )( ) 1,055.
30� D both sides corner worksurface,extended right
48� 60� 273/4� - 323/4� AUPM C4860D5 ( ) C ( )( )( ) 868.48� 72� 273/4� - 323/4� AUPM C4872D5 ( ) C ( )( )( ) 992.48� 84� 273/4� - 323/4� AUPM C4884D5 ( ) C ( )( )( ) 1,119.
24� D left/30� D right corner worksurface,extended right
42� 60� 273/4� - 323/4� AUPM C4260R5 ( ) C ( )( )( ) 804.42� 72� 273/4� - 323/4� AUPM C4272R5 ( ) C ( )( )( ) 930.48� 60� 273/4� - 323/4� AUPM C4860R5 ( ) C ( )( )( ) 868.48� 72� 273/4� - 323/4� AUPM C4872R5 ( ) C ( )( )( ) 992.48� 84� 273/4� - 323/4� AUPM C4884R5 ( ) C ( )( )( ) 1,119.
Order Code
Example: AUPM C4872S5 AC 118114 114
A CurrentsUP UpstartM PlannableC Table Shape4872 WidthS Depth5 Leg quantityA GrommetC Casters118 Top finish114 Edge finish114 Leg finish
Specification Information
Specify:
Grommet/No grommetA GrommetB No grommet
Casters/glidesC CastersG Glides
Top finish, plastic laminatesSee Color Program Page
Veneer Group 1See Color Program Page. Veneerfinishes are available throughCustom Product Development.
Edge finishes, T-moldSee Color Program Page
Leg finishes, paintSee Color Program Page
For Veneer Group 1, only black ortrim grey edgebands can bespecified.
Translucent orange, Translucentblue and Frosty white edgebandsare not available on PlannableUpstart tables.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Plannable Upstart tops have flatfronts allowing 2 tables to meet atright angles.
Plannable Upstart tables have fouror five straight legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 273/4� - 313/4� for castersand 273/4� - 323/4� for glides.
Rectangular return with two legsincludes flat bracket for attachmentto primary worksurfaces at rightangle.
Plannable Upstart corner andextended corner includeworksurface stiffeners that doubleas horizontal cable managers.
Knoll Office Tables
203
Ups
tart
Plannable Upstart Tablesextended cornerextended right
description w d h pattern no. lam.
30� D left/24� D right corner worksurface,extended right
42� 60� 273/4� - 323/4� AUPM C4260L5 ( ) C ( )( )( ) $804.42� 72� 273/4� - 323/4� AUPM C4272L5 ( ) C ( )( )( ) 930.48� 60� 273/4� - 323/4� AUPM C4860L5 ( ) C ( )( )( ) 868.48� 72� 273/4� - 323/4� AUPM C4872L5 ( ) C ( )( )( ) 992.48� 84� 273/4�- 323/4� AUPM C4884L5 ( ) C ( )( )( ) 1,119.
Order Code
Example: AUPM C4872S5 AC 118114 114
A CurrentsUP UpstartM PlannableC Table Shape4872 WidthS Depth5 Leg quantityA GrommetC Casters118 Top finish114 Edge finish114 Leg finish
Specification Information
Specify:
Grommet/No grommetA GrommetB No grommet
Casters/glidesC CastersG Glides
Top finish, plastic laminatesSee Color Program Page
Veneer Group 1See Color Program Page. Veneerfinishes are available throughCustom Product Development.
Edge finishes, T-moldSee Color Program Page
Leg finishes, paintSee Color Program Page
For Veneer Group 1, only black ortrim grey edgebands can bespecified.
Translucent orange, Translucentblue and Frosty white edgebandsare not available on PlannableUpstart tables.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Plannable Upstart tops have flatfronts allowing 2 tables to meet atright angles.
Plannable Upstart tables have fouror five straight legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 273/4� - 313/4� for castersand 273/4� - 323/4� for glides.
Rectangular return with two legsincludes flat bracket for attachmentto primary worksurfaces at rightangle.
Plannable Upstart corner andextended corner includeworksurface stiffeners that doubleas horizontal cable managers.
Knoll Office Tables
204
Plannable Upstart Tableshalf round and P-shapes
description w d h pattern no. lam.
Half round table desk, four legs 59� 30� 273/4� - 323/4� AUPM D594 ( ) G ( )( )( ) $640.60� 30� 273/4� - 323/4� AUPM D604 ( ) G ( )( )( ) 640.
P-shape surface, extended right 48� 75� 273/4� - 323/4� AUPM P4875S5 ( ) C ( )( )( ) 1,068.
P-shape surface, extended left 75� 48� 273/4� - 323/4� AUPM P7548S5 ( ) C ( )( )( ) 1,068.
Order Code
Example: AUPM P4875S5 AC 118114 114
A CurrentsUP UpstartM PlannableP Table Shape4875 WidthS Depth5 Leg quantityA GrommetC Casters118 Top finish114 Edge finish114 Leg finish
Specification Information
Specify:
Grommet/No grommetA GrommetB No grommet
Casters/glidesC CastersG Glides
Top finish, plastic laminatesSee Color Program Page
Veneer Group 1See Color Program Page. Veneerfinishes are available throughCustom Product Development.
Edge finishes, T-moldSee Color Program Page
Leg finishes, paintSee Color Program Page
For Veneer Group 1, only black ortrim grey edgebands can bespecified.
Translucent orange, Translucentblue and Frosty white edgebandsare not available on PlannableUpstart tables.
Suspended pedestals may not beused on Upstart tables.
Application Notes
Plannable Upstart tops have flatfronts allowing 2 tables to meet atright angles.
Plannable Upstart tables have fouror five straight legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 273/4� - 313/4� for castersand 273/4� - 323/4� for glides.
Rectangular return with two legsincludes flat bracket for attachmentto primary worksurfaces at rightangle.
Plannable Upstart half round andP-shape tables include worksurfacestiffeners that double as horizontalcable managers.
Knoll Office Tables
205
Ups
tart
Plannable Upstart Tablesstraight leg only
description h pattern no. Paint
Straight leg with glide 265/8� - 315/8� AUPM SGV ( ) $90.
Straight leg with caster 265/8� - 305/8� AUPM SCV ( ) 90.
Order Code
Example: AUPM SC 114
A CurrentsUP UpstartM PlannableS Straight legC Casters114 Leg finish
Specification Information
Specify:
Casters/glidesC CastersG Glides
Leg finishes, paintSee Color Program Page
Plannable Upstart straight legmay not be used with OriginalUpstart tables due to stabilityissues.
Application Notes
Each straight Plannable Upstart legcomes with four (4) metal insertsand four (4) screws.
When creating a freestanding tableusing Upstart legs, Upstart legsmust be attached using metalinserts.
Straight Plannable Upstart legsmust be positioned in accordancewith BIFMA guidelines.
Plannable Upstart tables have fouror five straight legs with 5�adjustable leveler glides or 4�adjustable casters. Adjustmentrange is 273/4� - 313/4� for castersand 273/4� - 323/4� for glides.
Knoll Office Tables
206
Accessories
type w d h pattern no. list price
Flat bracket 31/2� 14� AB1 F24 $32.
Cable tray 20� 2� 6� AR1 CB 127.
Carpet grips (set of 10) MM2-CG 19.
Non skid grips (set of 10) AA1NSK 33.
Pencil drawer 12� 151/8� 3� AUP PDU 113.
Lockable caster (set of 4) 2� 2� 21/4� AUPLC4 41.
Lockable caster (set of 5) 2� 2� 21/4� AUPLC5 51.
Order Code
Example: AA1-NSK
A CurrentsA1 AccessoryNSK Non skid grips
Specification Information
Flat bracket and cable tray areblack, painted steel.
Pencil drawer is integral color, lightgrey.
Application Notes
Flat bracket attaches returnworksurface to primary worksurfaceat right angle.
Cable tray attaches beneathstiffener under table surface toaccommodate transformers or abundle of cable.
Carpet grips snap into underside ofUpstart leveling glides for tractionon carpeted floors.
Non-skid grips snap intoleveling glides for traction onhard-surface floors.
Pencil drawer attaches to theunderside of a worksurface at anylocation.
Locking casters replace standardnon-locking casters.
Knoll Office Tables
207
Ups
tart
Upstart Privacy Screensfor Upstart tables
type application w d h pattern no. list price
Polycarbonate screen, back of table 36� 3/4� 24� AUP B3624RC ( ) $449.48� 3/4� 24� AUP B4824RC ( ) 511.60� 3/4� 24� AUP B6024RC ( ) 590.72� 3/4� 24� AUP B7224RC ( ) 644.
Marker surface screen, back of table 36� 3/4� 24� AUP B3624M ( ) 449.48� 3/4� 24� AUP B4824M ( ) 511.60� 3/4� 24� AUP B6024M ( ) 590.72� 3/4� 24� AUP B7224M ( ) 644.
Magnet rail 36� screen 18� 1/4� 2� AUP MR36 ( ) 51.48� screen 30� 1/4� 2� AUP MR48 ( ) 59.60� screen 36� 1/4� 2� AUP MR60 ( ) 65.72� screen 48� 1/4� 2� AUP MR72 ( ) 70.
Order Code
Example: AUP B7224 RC 117
A CurrentsUP UpstartB Back of worksurface72 Width24 HeightRC Polycarbonate117 Paint finish
Specification Information
Specify surface type and paintedfinish for screen frame, bracketsand magnet rail.
Surface type:RC Ribbed polycarbonateM Marker Surface
Application Notes
Upstart screens mount on the backof Upstart tables to provide partialenclosure above and belowworksurface height.
Screens have a translucent, ribbedpolycarbonate or marker surfacecore. Perimeter frame is paintedsteel with trim grey molded cornerblocks.
Screens include brackets that mountto matching holes under Upstarttables of the same width. Bracketholes are also provided for mountingtwo 36� wide screens on a 72� wideUpstart table.
Screen mounts in two positions,creating enclosure to a height of 39�or 48� when the table top is adjustedto 28�.
Screens may be shared betweendesks in back to backconfigurations.
Magnet rails span between screenmounting brackets to hang paperdocuments.
Magnet rails correspond in width toprivacy screens.
Please refer to Introduction page fortable and screen dimensions.
Knoll Office Tables
208
Plannable Upstart Privacy Screensback screens
description type w d h pattern no. 10 15 20 30 40 45
Back of worksurface screens to 42�H 30� 3/4� 15� MZ1-B3015-( ) $213. $240. $246. $269. $303. $336.36� 3/4� 15� MZ1-B3615-( ) 255. 278. 285. 313. 345. 370.42� 3/4� 15� MZ1-B4215-( ) 313. 328. 338. 372. 405. 433.48� 3/4� 15� MZ1-B4815-( ) 351. 365. 376. 414. 462. 495.54� 3/4� 15� MZ1-B5415-( ) 410. 423. 434. 480. 524. 556.60� 3/4� 15� MZ1-B6015-( ) 451. 460. 476. 522. 583. 619.66� 3/4� 15� MZ1-B6615-( ) * 497. * * * *72� 3/4� 15� MZ1-B7215-( ) * 550. * * * *78� 3/4� 15� MZ1-B7815-( ) * 604. * * * *
Back of worksurface screens to overhead supportheight, 46�H
30� 3/4� 19� MZ1-B3019-( ) 270. 294. 303. 332. 363. 396.36� 3/4� 19� MZ1-B3619-( ) 334. 350. 360. 397. 424. 450.42� 3/4� 19� MZ1-B4219-( ) 395. 404. 413. 457. 504. 534.48� 3/4� 19� MZ1-B4819-( ) 449. 459. 470. 518. 598. 610.54� 3/4� 19� MZ1-B5419-( ) 511. 514. 531. 584. 627. 665.60� 3/4� 19� MZ1-B6019-( ) 550. 566. 583. 644. 684. 729.66� 3/4� 19� MZ1-B6619-( ) * 620. * * * *72� 3/4� 19� MZ1-B7219-( ) * 678. * * * *78� 3/4� 19� MZ1-B7819-( ) * 735. * * * *
Back of worksurface screens, to Reuter overheadsupport height, 49�H
30� 3/4� 22� MZ1-B3022-( ) 332. 348. 356. 396. 424. 451.36� 3/4� 22� MZ1-B3622-( ) 409. 423. 434. 478. 513. 531.42� 3/4� 22� MZ1-B4222-( ) 470. 478. 495. 544. 604. 633.48� 3/4� 22� MZ1-B4822-( ) 550. 551. 568. 629. 671. 730.54� 3/4� 22� MZ1-B5422-( ) 605. 606. 629. 696. 740. 780.60� 3/4� 22� MZ1-B6022-( ) 644. 674. 696. 767. 812. 841.66� 3/4� 22� MZ1-B6622-( ) * 750. * * * *72� 3/4� 22� MZ1-B7222-( ) * 804. * * * *78� 3/4� 22� MZ1-B7822-( ) * 866. * * * *
Order Code
Example: MZ1-B6619-15-W210/20
MZ1 Morrison Networkprivacy screen
B Back of worksurface66 Width19 Height15 Surface type and group
no.W210/20 Upholstery
Specification Information
Surface type:10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45
Morrison Network screens may beused with Plannable Upstart tables.Refer to front of Upstart price bookfor planning information.
* Screens 66�w and wider areavailable with fabric railroaded to fitthe screens’ width. Please contactKnoll Custom Product Developmentto establish pattern numbers.
Application Notes
Back of worksurface screensprovide visual barrier and tackablesurface from underside ofworksurface to a height of 42�, 46�or 49�.
Screen widths should correspond tostraight worksurface width, or sumof VDT corner and return widths.
Use back of worksurface screen forVDT applications where one side isbacked by a vertical panel.
VDT worksurfaces will accept backscreens on only one back edge.
Back screens may not be used at theend of a straight worksurface; useend screens in this application.
Privacy screens are not available ina combination of fabrics.
Back of worksurface screens are fulldimension: two smaller screens maybe substituted for a larger one. Forexample, if using fabric grades20-70, specify two 36� screens for a72� surface.
Between back-to-back straight orVDT worksurfaces specify asingle3/4� back screen. This allowsback-to-back 235/8�D or 295/8�Dworksurfaces to plan on a precise 6�module.
15� high screens are used for a 42�horizon.
19�H screens are used to fill inspace between worksurface andMorrison overhead.
22�H screens fill the space betweenworksurface and Reuter overhead.
All but shared end screens start atthe bottom of the worksurface.
Privacy screens are supported bybrackets fastened at worksurfaceinserts. Privacy screens includemounting brackets, insert kit, andstiffener clip.
For replacement screen stiffenerssee Accessories page.
Privacy screens may be specified toachieve ASTM E-84 Class ‘‘A’’flamespread rating.
Knoll Office Tables
209
Ups
tart
Plannable Upstart Privacy ScreensVDT screens
description type w d h pattern no. 10 15 20 30 40 45
Back of VDT screens To 42�H 355/8� 3/4� 15� MZ1-V3615-( ) $255. $278. $285. $303. $336. $370.415/8� 3/4� 15� MZ1-V4215-( ) 313. 328. 338. 363. 396. 433.475/8� 3/4� 15� MZ1-V4815-( ) 351. 365. 376. 405. 450. 495.595/8� 3/4� 15� MZ1-V6015-( ) 447. 462. 478. 512. 565. 613.715/8� 3/4� 15� MZ1-V7215-( ) * 557. * * * *
To 46�H 355/8� 3/4� 19� MZ1-V3619-( ) 337. 349. 360. 383. 411. 450.415/8� 3/4� 19� MZ1-V4219-( ) 395. 404. 413. 441. 495. 534.475/8� 3/4� 19� MZ1-V4819-( ) 449. 460. 476. 507. 551. 610.595/8� 3/4� 19� MZ1-V6019-( ) 562. 582. 603. 653. 724. 784.715/8� 3/4� 19� MZ1-V7219-( ) * 702. * * * *
To 49�H 355/8� 3/4� 22� MZ1-V3622-( ) 409. 423. 434. 464. 495. 531.415/8� 3/4� 22� MZ1-V4222-( ) 470. 478. 495. 518. 591. 633.475/8� 3/4� 22� MZ1-V4822-( ) 550. 553. 570. 606. 610. 730.595/8� 3/4� 22� MZ1-V6022-( ) 652. 677. 698. 759. 839. 910.715/8� 3/4� 22� MZ1-V7222-( ) * 812. * * * *
Order Code
Example: MZ1-V4822-15-W210/20
MZ1 Morrison Networkprivacy screen
V VDT48 Width22 Height15 Surface type and group
no.W210/20 Upholstery
Specification Information
Surface type:10- Fabric group 1015- Fabric group 1520- Fabric group 2030- Fabric group 3040- Fabric group 4045- Fabric group 45
VDT worksurfaces will not acceptback screens on both back edges.Use VDT screens on at least oneback edge.
VDT screens are not in pairs;specify one for each back edge orone VDT screen and one backscreen.
* Screens 66�w and wider areavailable with fabric railroaded to fitthe screens’ width. Please contactKnoll Custom Product Developmentto establish pattern numbers.
Application Notes
Privacy screens are supported bybrackets fastened at worksurfaceinserts. Privacy screens includemounting brackets, insert kit andstiffener clip.
15� high screens are used for a 42�horizon.
19�H screens are used to fill inspace between worksurface anddesk mounted Morrison Networkoverheads.
22�H screens fill the space betweenworksurface and desk mountedReuter overheads.
Privacy screens may be specified toachieve ASTM E-84 Class ‘‘A’’flamespread rating.
* Morrison Network screens may beused with Plannable Upstart tables.Refer to front of Upstart price bookfor planning information.
Knoll Office Tables
210
Equity finishes
Core finishes
Laminates
111 Jet Black114 Folkstone Grey
(was LA)117 Soft Grey (was M42)118 Bright White119 Pumice (was LF)121 Micro Grey122 Brushed Sand123 Brushed Grey124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut128 Fog129 Micro Sand
Worksurface Edge
111 Jet Black113 Dark Grey (was Y3)114 Folkstone Grey
(was LA)115 Medium Grey (was Y2)117 Soft Grey (was E)118 Bright White119 Pumice (was LF)124 Medium Cherry125 Natural Maple126 Natural Cherry127 Walnut128 Fog
Knoll Color Program Painted TrimEP3 Panelsall other painted components
P1 Finishes
111 Jet Black112 Brown113 Dark Grey (was Y3)114 Folkstone Grey
(was LA)115 Med. Grey (was Y2)116 Sandstone117 Soft Grey (was E)
P2 Finishes
611 Beige Mist Metallic612 Medium Metallic Grey
P3 Finishes
118 Bright White613 Silver (was 3)
Insert Optionsfor insert panels, stack-on panels andadd-on screens.
Plexiglass
CL ClearIC IceSM SmokedTR Translucent
Lumasite (stack-on panels andadd-on screens only)
LF Frost
Knoll Office Tables
211
Equ
ity
Tables
description surface type w d h pattern no. P1 P2 P3
round table Laminate 293/4� 293/4� 29� ET1RT30 $700. $736. $770.353/4� 353/4� 29� ET1RT36 750. 785. 826.413/4� 413/4� 29� ET1RT42 999. 1,052. 1,099.
4 columns - 4 legs 593/4� 593/4� 29� ET1RT60 2,212. 2,325. 2,435.5 legs 473/4� 473/4� 29� ET1RT48 1,246. 1,307. 1,368.with casters 353/4� 353/4� 267/8� ET1RT36C 986. 1,038. 1,085.
square table Laminate 24� 24� 16� ET1ST2416 505. 530. 554.293/4� 293/4� 29� ET1ST30 668. 702. 736.353/4� 353/4� 29� ET1ST36 712. 748. 783.413/4� 413/4� 29� ET1ST42 951. 997. 1,045.
4 columns - 4 legs 591/2� 591/2� 29� ET1ST60 2,105. 2,211. 2,316.6 legs 473/4� 473/4� 29� ET1ST48 1,184. 1,242. 1,302.with casters 221/4� 221/4� 263/8� ET1ST22C 810. 849. 888.
rectangular table Laminate 473/4� 293/4� 29� ET1RCT3048 1,166. 1,224. 1,283.581/2� 351/2� 29� ET1RCT3660 1,681. 1,763. 1,849.593/4� 293/4� 29� ET1RCT3060 1,423. 1,495. 1,567.713/4� 293/4� 29� ET1RCT3072 1,681. 1,763. 1,849.713/4� 353/4� 29� ET1RCT3672 1,990. 2,088. 2,190.833/4� 413/4� 29� ET1RCT4284 2,663. 2,794. 2,928.
4 columns 953/4� 473/4� 29� ET1RCT4896 3,433. 3,605. 3,776.Accepts Equity drawers 691/4� 34� 29� ET1RCT3469 2,527. 2,652. 2,779.Accepts Equity drawers 791/4� 34� 29� ET1RCT3479 2,527. 2,652. 2,779.
Order Code
Example: ET1RCT3060, 117, 117,117
ET1RCT Rectangular table30 Depth60 Width117 Soft Grey laminate117 Soft Grey edge117 Soft Grey trim
Specification Information
Specify surface, trim and hardwaretrim color.
If a polished chrome base isdesired, add a ‘‘P’’ suffix and add$10 to the P1 list price.
Tables are only available in EW1profile.
Wood Grain and Metal edge bands:When specifying a top with a woodgrain edge band add $25 to thestandard list price.
When specifying a top with a metaledge band add $50 to the standardlist price.
Application Notes
Stretchers are used between two ormore hubs. Two column tables haveone stretcher; four column tablesuse four stretchers; and six columntables use seven.
ET1OT60144 top ships in twosections. Hidden fasteners joinsections.
Note: Add 10% to the list price ofany table when specifying alegacy laminate.
Knoll Office Tables
212
Tables
description surface type w d h pattern no. P1 P2 P3
oval table Laminate 713/4� 353/4� 29� ET1OT3672 $2,629. $2,759. $2,892.4 columns 953/4� 47� 29� ET1OT4896 4,311. 4,530. 4,745.6 columns 1193/4� 47� 29� ET1OT48120 5,274. 5,536. 5,801.6 columns 1193/4� 533/4� 29� ET1OT54120 5,879. 6,172. 6,466.6 columns 1433/4� 593/4� 29� ET1OT60144 7,677. 8,059. 8,444.
Order Code
Example: ET1RCT3060, 117, 117,117
ET1RCT Rectangular table30 Depth60 Width117 Soft Grey laminate117 Soft Grey edge117 Soft Grey trim
Specification Information
Specify surface, trim and hardwaretrim color.
If a polished chrome base isdesired, add a ‘‘P’’ suffix and add$10 to the P1 list price.
Tables are only available in EW1profile.
Wood Grain and Metal edge bands:When specifying a top with a woodgrain edge band add $25 to thestandard list price.
When specifying a top with a metaledge band add $50 to the standardlist price.
Application Notes
Stretchers are used between two ormore hubs. Two column tables haveone stretcher; four column tablesuse four stretchers; and six columntables use seven.
ET1OT60144 top ships in twosections. Hidden fasteners joinsections.
Note: Add 10% to the list price ofany table when specifying alegacy laminate.
Knoll Office Tables
213
Equ
ity
Dividends Horizon Tables The design details of Dividends Horizon tables are consistent with the scale and visual language of the Dividends Horizon system. This design consistency makes Dividends Horizon tables appropriate for use in conference, meeting, private office and open plan office applications.
Dividends Horizon Y Leg tables are available in two versions:
Freestanding Y Leg Tables Freestanding Y Leg tables include a worksurface and base assembly. All freestanding table sizes are available with two Y legs and a horizontal stretcher connecting the two columns.
In addition, 24 and 30 inch deep tables are available without a stretcher. Tables without stretcher include an integral worksurface support plate. 36 and 42 inch deep tables are available only with a stretcher.
Available Sizes
Credenza Supported Y Leg Tables The unique Dividends Horizon Credenza Supported Y Leg tables are designed to be used in concert with Dividends Horizon low credenzas, specified separately.
Credenza Supported Tables include one Y Leg, credenza support spacer, and aworksurface with integral stiffening plate.
Note: Credenza supported tables may be used with laminate or veneer top credenzas only, and are not compatible with steel top credenzas.
Available Sizes
Optional Edge Grommet Edge grommets are optional and can be factory installed centered along the rear edge of rectangular or racetrack freestanding or credenza supported Y Leg tables.
Construction
- Material: 0.028 inch thick high pressure laminate or 0.6mm thick veneer on 1-1/8" particle board core - Edge: plastic laminate tops have a 2mm edgeband; Techwood tops have a 3/16 inch thick Techwood edge
- Stretcher: extruded aluminum - Stiffening plate: 4 inch deep 12 gauge steel plate (length varies) - Foot: die cast aluminum - Column: extruded aluminum with 3/16 inch thick structural plate - Credenza support spacer: 2-15/16 inches high x 9-5/8 inches wide x 1-9/16 inches deep steel box with a flat bracket on top
Note: Dividends Horizon tables are only available in Knoll Core paint, laminate, and Techwood finishes. Legacy finishes are not available. All paint finishes have the Dividends Horizon textured paint finish; this includes 613 Silver, which is a smooth paint on all other Dividends Horizon products.
Note: The stiffening plate on tables without a stretcher prevents the field installation of a grommet or plexus box. (see illustration below)
24" Deep Freestanding Racetrack Y Leg Table with Stretcher
24" Deep Credenza Supported Racetrack Y Leg Table
24" Deep Freestanding Racetrack Y Leg Table without Stretcher
Stiffening plate
Y Leg TablesFreestanding and Credenza SupportedSpecifications
Knoll Office Tables
214
Y Leg TablesFreestanding Rectangular Table Top24� and 30� Deep
description w * w d t h pattern no.
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
24� Deep Rectangular with(2) Y-Legs, No Grommet
(with stretcher shown)
60� 5913/16� 231/2� 11/4� 281/2� DT1ARY6024NS $1,501. $1,652. $1,718. $1,720. $1,892. $1,969.66� 6513/16� 231/2� 11/4� 281/2� DT1ARY6624NS 1,518. 1,671. 1,736. 1,747. 1,924. 2,001.72� 7113/16� 231/2� 11/4� 281/2� DT1ARY7224NS 1,534. 1,688. 1,757. 1,777. 1,954. 2,033.78� 7713/16� 231/2� 11/4� 281/2� DT1ARY7824NS 1,552. 1,706. 1,775. 1,806. 1,987. 2,066.84� 8313/16� 231/2� 11/4� 281/2� DT1ARY8424NS 1,580. 1,737. 1,808. 1,835. 2,018. 2,099.90� 8913/16� 231/2� 11/4� 281/2� DT1ARY9024NS 1,608. 1,770. 1,840. 1,862. 2,050. 2,131.96� 9513/16� 231/2� 11/4� 281/2� DT1ARY9624NS 1,637. 1,801. 1,872. 1,891. 2,081. 2,165.
30� Deep Rectangular with(2) Y-Legs, No Grommet
(with stretcher shown)
60� 5913/16� 291/2� 11/4� 281/2� DT1ARY6030NS 1,539. 1,694. 1,763. 1,758. 1,933. 2,011.66� 6513/16� 291/2� 11/4� 281/2� DT1ARY6630NS 1,562. 1,718. 1,787. 1,791. 1,970. 2,049.72� 7113/16� 291/2� 11/4� 281/2� DT1ARY7230NS 1,582. 1,740. 1,811. 1,824. 2,007. 2,087.78� 7713/16� 291/2� 11/4� 281/2� DT1ARY7830NS 1,604. 1,765. 1,836. 1,858. 2,044. 2,125.84� 8313/16� 291/2� 11/4� 281/2� DT1ARY8430NS 1,635. 1,799. 1,870. 1,891. 2,081. 2,165.90� 8913/16� 291/2� 11/4� 281/2� DT1ARY9030NS 1,664. 1,831. 1,904. 1,925. 2,116. 2,202.96� 9513/16� 291/2� 11/4� 281/2� DT1ARY9630NS 1,695. 1,865. 1,939. 1,959. 2,153. 2,240.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/16�
Ordering Information
Freestanding Y Leg Table:
1. Pattern number2. Base/Stretcher Paint Finish3. Top Finish4. Edge Finish
Order Code
Freestanding Y Leg Table:
Example: DT1ARY6024NS, 114,114, 114
DT1 Dividends HorizonTable
A 2 Leg table assemblyR Rectangular shapeY Y Leg Base60 Overall width in inches24 Overall depth in inchesN No grommetS Stretcher114 Base/ stretcher paint
finish114 Laminate top finish114 Edgeband finish
Included with:
Freestanding Y Leg Table:
• (2) Y Legs• Hardware kit• Table top• Stretcher or stiffening plate
Note: Y Leg tables are finished withtextured paint, including 613 Silver.
Note: Y Leg Tables are onlyavailable in Knoll core finishes.
Options
Grommet Option:
• To specify an edge grommet,replace the ‘‘N’’ suffix from thepattern number with an ‘‘E’’ andadd $17.
Stretcher Option:
• A stretcher is optional on 24� and30� deep tables ONLY. To specifya table without a stretcher replacethe ‘‘S’’ suffix from the patternnumber with an ‘‘N’’.Stretchers are required on 36�and 42� depths.
Knoll Office Tables
215
Div
iden
dsH
oriz
on
Y Leg TablesFreestanding Rectangular Table Top36� and 42� Deep
description w * w d t h pattern no.
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
36� Deep Rectangular with(2) Y-Legs, No Grommet
60� 5913/16� 351/2� 11/4� 281/2� DT1ARY6036N $1,591. $1,748. $1,819. $1,836. $2,019. $2,099.66� 6513/16� 351/2� 11/4� 281/2� DT1ARY6636N 1,618. 1,780. 1,851. 1,871. 2,059. 2,140.72� 7113/16� 351/2� 11/4� 281/2� DT1ARY7236N 1,646. 1,811. 1,884. 1,907. 2,098. 2,182.78� 7713/16� 351/2� 11/4� 281/2� DT1ARY7836N 1,674. 1,842. 1,916. 1,943. 2,138. 2,223.84� 8313/16� 351/2� 11/4� 281/2� DT1ARY8436N 1,701. 1,872. 1,947. 1,980. 2,178. 2,264.90� 8913/16� 351/2� 11/4� 281/2� DT1ARY9036N 1,729. 1,902. 1,979. 2,016. 2,218. 2,305.96� 9513/16� 351/2� 11/4� 281/2� DT1ARY9636N 1,758. 1,933. 2,011. 2,052. 2,257. 2,346.
42� Deep Rectangular with(2) Y-Legs, No Grommet
84� 8313/16� 421/2� 11/4� 281/2� DT1ARY8442N 1,745. 1,921. 1,999. 2,216. 2,437. 2,535.90� 8913/16� 421/2� 11/4� 281/2� DT1ARY9042N 1,783. 1,962. 2,040. 2,247. 2,471. 2,569.96� 9513/16� 421/2� 11/4� 281/2� DT1ARY9642N 1,810. 1,991. 2,070. 2,276. 2,504. 2,604.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/16�
Ordering Information
Freestanding Y Leg Table:
1. Pattern number2. Base/Stretcher Paint Finish3. Top Finish4. Edge Finish
Order Code
Freestanding Y Leg Table:
Example: DT1ARY6024NS, 114,114, 114
DT1 Dividends HorizonTable
A 2 Leg table assemblyR Rectangular shapeY Y Leg Base60 Overall width in inches24 Overall depth in inchesN No grommetS Stretcher114 Base/ stretcher paint
finish114 Laminate top finish114 Edgeband finish
Included with:
Freestanding Y Leg Table:
• (2) Y Legs• Hardware kit• Table top• Stretcher or stiffening plate
Note: Y Leg tables are finished withtextured paint, including 613 Silver.
Note: Y Leg Tables are onlyavailable in Knoll core finishes.
Options
Grommet Option:
• To specify an edge grommet,replace the ‘‘N’’ suffix from thepattern number with an ‘‘E’’ andadd $17.
Stretcher Option:
• A stretcher is optional on 24� and30� deep tables ONLY. To specifya table without a stretcher replacethe ‘‘S’’ suffix from the patternnumber with an ‘‘N’’.Stretchers are required on 36�and 42� depths.
Knoll Office Tables
216
Y Leg TablesFreestanding Racetrack Table Top24�and 30� Deep
description w * w d t h pattern number
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
24� Deep Racetrack with(2) Y-Legs, No Grommet
(with stretcher shown)
60� 5913/16� 231/2� 11/4� 281/2� DT1ATY6024NS $1,500. $1,651. $1,717. $2,678. $2,947. $3,065.66� 6513/16� 231/2� 11/4� 281/2� DT1ATY6624NS 1,548. 1,701. 1,770. 2,703. 2,973. 3,093.72� 7113/16� 231/2� 11/4� 281/2� DT1ATY7224NS 1,593. 1,753. 1,822. 2,727. 3,002. 3,122.78� 7713/16� 231/2� 11/4� 281/2� DT1ATY7824NS 1,639. 1,803. 1,875. 2,752. 3,029. 3,149.84� 8313/16� 231/2� 11/4� 281/2� DT1ATY8424NS 1,667. 1,834. 1,907. 2,776. 3,055. 3,177.90� 8913/16� 231/2� 11/4� 281/2� DT1ATY9024NS 1,695. 1,865. 1,939. 2,802. 3,083. 3,207.96� 9513/16� 231/2� 11/4� 281/2� DT1ATY9624NS 1,724. 1,896. 1,973. 2,827. 3,109. 3,235.
30� Deep Racetrack with(2) Y-Legs, No Grommet
(with stretcher shown)
60� 5913/16� 291/2� 11/4� 281/2� DT1ATY6030NS 1,560. 1,715. 1,784. 2,718. 2,991. 3,111.66� 6513/16� 291/2� 11/4� 281/2� DT1ATY6630NS 1,603. 1,764. 1,834. 2,745. 3,020. 3,141.72� 7113/16� 291/2� 11/4� 281/2� DT1ATY7230NS 1,647. 1,811. 1,884. 2,771. 3,049. 3,171.78� 7713/16� 291/2� 11/4� 281/2� DT1ATY7830NS 1,690. 1,859. 1,933. 2,799. 3,079. 3,203.84� 8313/16� 291/2� 11/4� 281/2� DT1ATY8430NS 1,722. 1,894. 1,970. 2,826. 3,108. 3,233.90� 8913/16� 291/2� 11/4� 281/2� DT1ATY9030NS 1,754. 1,928. 2,006. 2,852. 3,137. 3,263.96� 9513/16� 291/2� 11/4� 281/2� DT1ATY9630NS 1,785. 1,964. 2,042. 2,879. 3,167. 3,294.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/16�
Ordering Information
Freestanding Y Leg Table:
1. Pattern number2. Base/Stretcher Paint Finish3. Top Finish4. Edge Finish
Order Code
Freestanding Y Leg Table:
Example: DT1ATY6024NS, 114,114, 114
DT1 Dividends HorizonTable
A 2 Leg table assemblyT Racetrack shapeY Y Leg Base60 Overall width in inches24 Overall depth in inchesN No grommetS Stretcher114 Base/ stretcher paint
finish114 Laminate top finish114 Edgeband finish
Included with:
Freestanding Y Leg Table:
• (2) Y Legs• Hardware kit• Table top• Stretcher or stiffening plate
Note: Y Leg tables are finished withtextured paint, including 613 Silver.
Note: Y Leg Tables are onlyavailable in Knoll core finishes.
Options
Grommet Option:
• To specify an edge grommet,replace the ‘‘N’’ suffix from thepattern number with an ‘‘E’’ andadd $17.
Stretcher Option:
• A stretcher is optional on 24� and30� deep tables ONLY. To specifya table without a stretcher replacethe ‘‘S’’ suffix from patternnumber with an ‘‘N’’.Stretchers are required on 36�and 42� depths.
Knoll Office Tables
217
Div
iden
dsH
oriz
on
Y Leg TablesFreestanding Racetrack Table Top36� and 42� Deep
description w * w d t h pattern no.
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
36� Deep Racetrack with(2) Y-Legs, No Grommet
60� 5913/16� 351/2� 11/4� 281/2� DT1ATY6036N $1,613. $1,775. $1,846. $2,758. $3,034. $3,156.66� 6513/16� 351/2� 11/4� 281/2� DT1ATY6636N 1,663. 1,829. 1,902. 2,788. 3,065. 3,188.72� 7113/16� 351/2� 11/4� 281/2� DT1ATY7236N 1,713. 1,885. 1,961. 2,816. 3,097. 3,222.78� 7713/16� 351/2� 11/4� 281/2� DT1ATY7836N 1,764. 1,939. 2,017. 2,845. 3,129. 3,255.84� 8313/16� 351/2� 11/4� 281/2� DT1ATY8436N 1,791. 1,971. 2,049. 2,874. 3,161. 3,288.90� 8913/16� 351/2� 11/4� 281/2� DT1ATY9036N 1,820. 2,002. 2,082. 2,902. 3,194. 3,321.96� 9513/16� 351/2� 11/4� 281/2� DT1ATY9636N 1,848. 2,032. 2,113. 2,931. 3,225. 3,353.
42� Deep Racetrack with(2) Y-Legs, No Grommet
84� 8313/16� 421/2� 11/4� 281/2� DT1ATY8442N 1,834. 2,017. 2,097. 2,924. 3,217. 3,345.90� 8913/16� 421/2� 11/4� 281/2� DT1ATY9042N 1,869. 2,057. 2,139. 2,955. 3,251. 3,380.96� 9513/16� 421/2� 11/4� 281/2� DT1ATY9642N 1,902. 2,093. 2,177. 2,984. 3,284. 3,416.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/16�
Ordering Information
Freestanding Y Leg Table:
1. Pattern number2. Base/Stretcher Paint Finish3. Top Finish4. Edge Finish
Order Code
Freestanding Y Leg Table:
Example: DT1ATY6024NS, 114,114, 114
DT1 Dividends HorizonTable
A 2 Leg table assemblyT Racetrack shapeY Y Leg Base60 Overall width in inches24 Overall depth in inchesN No grommetS Stretcher114 Base/ stretcher paint
finish114 Laminate top finish114 Edgeband finish
Included with:
Freestanding Y Leg Table:
• (2) Y Legs• Hardware kit• Table top• Stretcher or stiffening plate
Note: Y Leg tables are finished withtextured paint, including 613 Silver.
Note: Y Leg Tables are onlyavailable in Knoll core finishes.
Options
Grommet Option:
• To specify an edge grommet,replace the ‘‘N’’ suffix from thepattern number with an ‘‘E’’ andadd $17.
Stretcher Option:
• A stretcher is optional on 24� and30� deep tables ONLY. To specifya table without a stretcher replacethe ‘‘S’’ suffix from patternnumber with an ‘‘N’’.Stretchers are required on 36�and 42� depths.
Knoll Office Tables
218
Y Leg TablesCredenza Supported Rectangular Table Top24�, 30� and 36� Deep
description w * w d t h pattern no�
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
24� Deep Rectangular with (1) Y-Legand (1) Spacer - No Grommet
(credenza not included)
60� 5913/16� 231/2� 11/4� 281/2� DT1CRY6024N $1,254. $1,381. $1,436. $1,471. $1,617. $1,682.66� 6513/16� 231/2� 11/4� 281/2� DT1CRY6624N 1,271. 1,398. 1,454. 1,498. 1,649. 1,714.72� 7113/16� 231/2� 11/4� 281/2� DT1CRY7224N 1,286. 1,416. 1,473. 1,527. 1,680. 1,746.78� 7713/16� 231/2� 11/4� 281/2� DT1CRY7824N 1,303. 1,434. 1,491. 1,557. 1,712. 1,780.84� 8313/16� 231/2� 11/4� 281/2� DT1CRY8424N 1,331. 1,466. 1,524. 1,585. 1,742. 1,813.90� 8913/16� 231/2� 11/4� 281/2� DT1CRY9024N 1,361. 1,496. 1,557. 1,613. 1,775. 1,845.96� 9513/16� 231/2� 11/4� 281/2� DT1CRY9624N 1,390. 1,528. 1,590. 1,642. 1,806. 1,878.
30� Deep Rectangular with (1) Y-Legand (1) Spacer - No Grommet
(credenza not included)
60� 5913/16� 291/2� 11/4� 281/2� DT1CRY6030N 1,290. 1,419. 1,476. 1,509. 1,659. 1,725.66� 6513/16� 291/2� 11/4� 281/2� DT1CRY6630N 1,312. 1,443. 1,500. 1,541. 1,696. 1,764.72� 7113/16� 291/2� 11/4� 281/2� DT1CRY7230N 1,332. 1,467. 1,525. 1,575. 1,732. 1,802.78� 7713/16� 291/2� 11/4� 281/2� DT1CRY7830N 1,355. 1,490. 1,551. 1,608. 1,770. 1,840.84� 8313/16� 291/2� 11/4� 281/2� DT1CRY8430N 1,386. 1,524. 1,585. 1,642. 1,806. 1,878.90� 8913/16� 291/2� 11/4� 281/2� DT1CRY9030N 1,416. 1,559. 1,621. 1,675. 1,843. 1,916.96� 9513/16� 291/2� 11/4� 281/2� DT1CRY9630N 1,447. 1,593. 1,656. 1,707. 1,879. 1,953.
36� Deep Rectangular with (1) Y-Legand (1) Spacer - No Grommet
(credenza not included)
60� 5913/16� 351/2� 11/4� 281/2� DT1CRY6036N 1,369. 1,506. 1,566. 1,612. 1,774. 1,845.66� 6513/16� 351/2� 11/4� 281/2� DT1CRY6636N 1,395. 1,533. 1,596. 1,646. 1,811. 1,883.72� 7113/16� 351/2� 11/4� 281/2� DT1CRY7236N 1,420. 1,563. 1,624. 1,679. 1,847. 1,921.78� 7713/16� 351/2� 11/4� 281/2� DT1CRY7836N 1,446. 1,591. 1,654. 1,713. 1,884. 1,960.84� 8313/16� 351/2� 11/4� 281/2� DT1CRY8436N 1,482. 1,631. 1,695. 1,745. 1,920. 1,997.90� 8913/16� 351/2� 11/4� 281/2� DT1CRY9036N 1,518. 1,670. 1,736. 1,780. 1,958. 2,035.96� 9513/16� 351/2� 11/4� 281/2� DT1CRY9636N 1,555. 1,710. 1,778. 1,813. 1,993. 2,073.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/16�
Ordering Information
Credenza Supported Y Leg Table:
1. Pattern number2. Base/Stretcher Paint Finish3. Top Finish4. Edge Finish
Order Code
Credenza Supported Y Leg Table:
Example: DT1CRY6024N, 114,114, 114
DT1 Dividends HorizonTable
C Credenza supportassembly
R Rectangular shapeY Y Leg Base60 Overall width in inches24 Overall depth in inchesN No grommet114 Base/ stretcher paint
finish114 Laminate top finish114 Edgeband finish
Included with:
Credenza Supported Y leg Table:
• (1) Y Leg• (1) Credenza support spacer• Hardware kit• Table top• Stiffening plate
Credenza must be specifiedseparately
Note: Y Leg tables are finished withtextured paint, including 613 Silver.
Note: Y Leg Tables are onlyavailable in Knoll core finishes.
Options
Grommet Option:
• To specify an edge grommet,replace the ‘‘N’’ suffix from thepattern number with an ‘‘E’’ andadd $17.
Note: Credenza supported tablesmay be used with laminate or veneertop credenzas only and are notcompatible with steel top credenzas.
Knoll Office Tables
219
Div
iden
dsH
oriz
on
Y Leg TablesCredenza Supported Racetrack Table Top24�, 30� and 36� Deep
description w * w d h pattern no.
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
24� Deep Racetrack with (1) Y-Legand (1) Spacer - No Grommet
(credenza not included)
60� 5913/16� 231/2� 281/2� DT1CTY6024N $1,252. $1,378. $1,434. $2,452. $2,697. $2,770.66� 6513/16� 231/2� 281/2� DT1CTY6624N 1,299. 1,429. 1,486. 2,465. 2,713. 2,793.72� 7113/16� 231/2� 281/2� DT1CTY7224N 1,346. 1,480. 1,538. 2,479. 2,727. 2,813.78� 7713/16� 231/2� 281/2� DT1CTY7824N 1,392. 1,530. 1,592. 2,493. 2,743. 2,835.84� 8313/16� 231/2� 281/2� DT1CTY8424N 1,407. 1,548. 1,609. 2,506. 2,758. 2,856.90� 8913/16� 231/2� 281/2� DT1CTY9024N 1,422. 1,565. 1,626. 2,520. 2,772. 2,877.96� 9513/16� 231/2� 281/2� DT1CTY9624N 1,437. 1,581. 1,644. 2,534. 2,789. 2,898.
30� Deep Racetrack with (1) Y-Legand (1) Spacer - No Grommet
(credenza not included)
60� 5913/16� 291/2� 281/2� DT1CTY6030N 1,312. 1,443. 1,500. 2,467. 2,714. 2,805.66� 6513/16� 291/2� 281/2� DT1CTY6630N 1,356. 1,491. 1,552. 2,495. 2,744. 2,839.72� 7113/16� 291/2� 281/2� DT1CTY7230N 1,400. 1,538. 1,601. 2,521. 2,774. 2,874.78� 7713/16� 291/2� 281/2� DT1CTY7830N 1,443. 1,588. 1,651. 2,549. 2,805. 2,908.84� 8313/16� 291/2� 281/2� DT1CTY8430N 1,474. 1,621. 1,687. 2,578. 2,835. 2,941.90� 8913/16� 291/2� 281/2� DT1CTY9030N 1,506. 1,656. 1,722. 2,604. 2,866. 2,976.96� 9513/16� 291/2� 281/2� DT1CTY9630N 1,536. 1,690. 1,759. 2,632. 2,895. 3,011.
36� Deep Racetrack with (1) Y-Legand (1) Spacer - No Grommet
(credenza not included)
60� 5913/16� 351/2� 281/2� DT1CTY6036N 1,389. 1,527. 1,589. 2,482. 2,730. 2,839.66� 6513/16� 351/2� 281/2� DT1CTY6636N 1,437. 1,581. 1,644. 2,523. 2,775. 2,886.72� 7113/16� 351/2� 281/2� DT1CTY7236N 1,486. 1,635. 1,700. 2,564. 2,821. 2,933.78� 7713/16� 351/2� 281/2� DT1CTY7836N 1,534. 1,688. 1,757. 2,606. 2,867. 2,980.84� 8313/16� 351/2� 281/2� DT1CTY8436N 1,570. 1,727. 1,797. 2,647. 2,912. 3,029.90� 8913/16� 351/2� 281/2� DT1CTY9036N 1,606. 1,766. 1,837. 2,688. 2,957. 3,076.96� 9513/16� 351/2� 281/2� DT1CTY9636N 1,641. 1,805. 1,877. 2,729. 3,003. 3,123.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/16�
Ordering Information
Credenza Supported Y Leg Table:
1. Pattern number2. Base/Stretcher Paint Finish3. Top Finish4. Edge Finish
Order Code
Credenza Supported Y Leg Table:
Example: DT1CTY6024N, 114,114, 114
DT1 Dividends HorizonTable
C Credenza supportassembly
T Racetrack shapeY Y Leg Base60 Overall width in inches24 Overall depth in inchesN No grommet114 Base/ stretcher paint
finish114 Laminate top finish114 Edgeband finish
Included with:
Credenza Supported Y Leg Table:
• (1) Y Leg• (1) Credenza support spacer• Hardware kit• Table top• Stiffening plate
Credenza must be specifiedseparately
Note: Y Leg tables are finished withtextured paint, including 613 Silver.
Note: Y Leg Tables are onlyavailable in Knoll core finishes.
Options
Grommet Option:
• To specify an edge grommet,replace the ‘‘N’’ suffix from thepattern number with an ‘‘E’’ andadd $17.
Note: Credenza supported tablesmay be used with laminate or veneertop credenzas only and are notcompatible with steel top credenzas.
Knoll Office Tables
220
X Base Tables Dividends Horizon X base tables are designed to be used along with the Dividends Horizon system to create a consistent aesthetic throughout the entire office. With various height and width options, X base tables can be used in a multitude of applications, including collaboration areas in the open plan, break rooms, and lounge areas.
Available with a round, square or rounded square top shape with either a laminate or veneer finish, a Dividends Horizon X base table is appropriate for use in a vast array of applications from the private office to the open plan and even to lounge areas. The five height options allow for the same table base to be used in various applications while maintaining visual consistency throughout the space.
X base tables include a top, support column, and X base.
Available Sizes
Construction Worksurface:
- Material: 0.028" thick high pressure laminate or 0.6mm thick veneer on 1-1/8" particle board core
- Edge: plastic laminate tops have a 2mm edgeband; Techwood tops have a 3/16" thick Techwood edge.
Base:
- Foot: die cast aluminum
- Column: extruded aluminum with 3/16" thick structural plate
Table Supports X bases may be specified separately for use with an alternative table top. The appropriate X base size must be selected according to the width of the table top being used. X bases are available in five heights and may be used with table tops that are 30 to 48 inches wide.
Available Sizes Heights: 17, 21, 28-1/2, 36, and 42 inches
Construction Base:
- Foot: die cast aluminum
- Column: extruded aluminum with 3/16" thick structural plate
Note: Dividends Horizon tables are only available in Knoll Core paint and laminate finishes. Legacy finishes are not available. All paint finishes have the Dividends Horizon textured paint finish; this includes 613 Silver, which is a smooth paint on all other Dividends Horizon products.
Square X Base Table
Round X Base Table
Rounded Square X Base Table
X Base TablesTable SupportsSpecifications
Knoll Office Tables
221
Div
iden
dsH
oriz
on
X Base TablesSquare Table Tops17�, 21�, 28�, 36� and 42� High
description w * w d t h pattern no.
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
17� High Square X Base Table 30� 2913/16� 2913/16� 11/4� 17� DT1ASX303017 $913. $1,007. $1,048. $1,349. $1,490. $1,550.36� 3513/16� 3513/16� 11/4� 17� DT1ASX363617 953. 1,051. 1,094. 1,425. 1,569. 1,633.42� 4113/16� 4113/16� 11/4� 17� DT1ASX424217 1,057. 1,165. 1,212. 1,508. 1,660. 1,727.48� 4713/16� 4713/16� 11/4� 17� DT1ASX484817 1,109. 1,223. 1,272. 1,568. 1,726. 1,797.
21� High Square X Base Table 30� 2913/16� 2913/16� 11/4� 21� DT1ASX303021 913. 1,007. 1,048. 1,349. 1,490. 1,550.36� 3513/16� 3513/16� 11/4� 21� DT1ASX363621 953. 1,051. 1,094. 1,425. 1,569. 1,633.42� 4113/16� 4113/16� 11/4� 21� DT1ASX424221 1,057. 1,165. 1,212. 1,508. 1,660. 1,727.48� 4713/16� 4713/16� 11/4� 21� DT1ASX484821 1,109. 1,223. 1,272. 1,568. 1,726. 1,797.
28� High Square X Base Table 30� 2913/16� 2913/16� 11/4� 281/2� DT1ASX3030 935. 1,028. 1,069. 1,369. 1,511. 1,570.36� 3513/16� 3513/16� 11/4� 281/2� DT1ASX3636 974. 1,071. 1,114. 1,445. 1,590. 1,653.42� 4113/16� 4113/16� 11/4� 281/2� DT1ASX4242 1,077. 1,186. 1,233. 1,528. 1,681. 1,747.48� 4713/16� 4713/16� 11/4� 281/2� DT1ASX4848 1,129. 1,243. 1,292. 1,589. 1,746. 1,817.
36� High Square X Base Table 30� 2913/16� 2913/16� 11/4� 36� DT1ASX303036 986. 1,079. 1,120. 1,420. 1,563. 1,621.36� 3513/16� 3513/16� 11/4� 36� DT1ASX363636 1,025. 1,122. 1,166. 1,496. 1,641. 1,704.42� 4113/16� 4113/16� 11/4� 36� DT1ASX424236 1,128. 1,237. 1,284. 1,580. 1,732. 1,800.48� 4713/16� 4713/16� 11/4� 36� DT1ASX484836 1,182. 1,294. 1,345. 1,640. 1,799. 1,868.
42� High Square X Base Table 30� 2913/16� 2913/16� 11/4� 42� DT1ASX303042 1,006. 1,100. 1,142. 1,441. 1,583. 1,642.36� 3513/16� 3513/16� 11/4� 42� DT1ASX363642 1,045. 1,144. 1,187. 1,517. 1,661. 1,725.42� 4113/16� 4113/16� 11/4� 42� DT1ASX424242 1,150. 1,258. 1,305. 1,601. 1,754. 1,820.48� 4713/16� 4713/16� 11/4� 42� DT1ASX484842 1,202. 1,315. 1,365. 1,660. 1,819. 1,889.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/16�
Ordering Information
X Base Table:
1. Pattern number2. Base Paint Finish3. Top Finish4. Edge Finish
Order Code
X Base Table:
Example: DT1ASX3030, 114, 114,114
DT1 Dividends HorizonTable
A Table assemblyS Square shapeX X Base30 Overall width in inches30 Overall depth in inches114 Base finish114 Laminate top finish114 Edgeband finish
Included with:
X Base Table:
• (1) X Base• Hardware kit• Table top
Note: X Base Tables are finishedwith textured paint, including 613Silver.
Note: X Base Tables are onlyavailable in Knoll core finishes.
Options
Knoll Office Tables
222
X Base TablesRound Table Tops17�, 21�, 28�, 36� and 42� High
description w * w d t h pattern no.
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
17� High Round X Base Table 30� 2913/16� 2913/16� 11/4� 17� DT1ACX3017 $922. $1,018. $1,059. $2,060. $2,266. $2,358.36� 3513/16� 3513/16� 11/4� 17� DT1ACX3617 960. 1,058. 1,101. 2,141. 2,357. 2,453.42� 4113/16� 4113/16� 11/4� 17� DT1ACX4217 1,062. 1,170. 1,218. 2,244. 2,471. 2,570.48� 4713/16� 4713/16� 11/4� 17� DT1ACX4817 1,114. 1,228. 1,277. 2,305. 2,538. 2,640.
21� High Round X Base Table 30� 2913/16� 2913/16� 11/4� 21� DT1ACX3021 922. 1,018. 1,059. 2,060. 2,266. 2,358.36� 3513/16� 3513/16� 11/4� 21� DT1ACX3621 960. 1,058. 1,101. 2,141. 2,357. 2,453.42� 4113/16� 4113/16� 11/4� 21� DT1ACX4221 1,062. 1,170. 1,218. 2,244. 2,471. 2,570.48� 4713/16� 4713/16� 11/4� 21� DT1ACX4821 1,114. 1,228. 1,277. 2,305. 2,538. 2,640.
28� High Round X Base Table 30� 2913/16� 2913/16� 11/4� 281/2� DT1ACX30 944. 1,038. 1,079. 2,081. 2,287. 2,380.36� 3513/16� 3513/16� 11/4� 281/2� DT1ACX36 981. 1,078. 1,121. 2,161. 2,379. 2,473.42� 4113/16� 4113/16� 11/4� 281/2� DT1ACX42 1,082. 1,191. 1,238. 2,265. 2,491. 2,592.48� 4713/16� 4713/16� 11/4� 281/2� DT1ACX48 1,136. 1,248. 1,298. 2,325. 2,558. 2,661.
36� High Round X Base Table 30� 2913/16� 2913/16� 11/4� 36� DT1ACX3036 995. 1,089. 1,130. 2,132. 2,338. 2,431.36� 3513/16� 3513/16� 11/4� 36� DT1ACX3636 1,032. 1,129. 1,173. 2,214. 2,430. 2,524.42� 4113/16� 4113/16� 11/4� 36� DT1ACX4236 1,135. 1,242. 1,289. 2,316. 2,543. 2,643.48� 4713/16� 4713/16� 11/4� 36� DT1ACX4836 1,187. 1,300. 1,350. 2,378. 2,610. 2,712.
42� High Round X Base Table 30� 2913/16� 2913/16� 11/4� 42� DT1ACX3042 1,016. 1,110. 1,152. 2,152. 2,358. 2,452.36� 3513/16� 3513/16� 11/4� 42� DT1ACX3642 1,053. 1,151. 1,194. 2,234. 2,450. 2,545.42� 4113/16� 4113/16� 11/4� 42� DT1ACX4242 1,155. 1,263. 1,310. 2,337. 2,563. 2,664.48� 4713/16� 4713/16� 11/4� 42� DT1ACX4842 1,207. 1,320. 1,370. 2,398. 2,631. 2,732.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/16�
Ordering Information
X Base Table:
1. Pattern number2. Base Paint Finish3. Top Finish4. Edge Finish
Order Code
X Base Table:
Example: DT1ACX3030, 114, 114,114
DT1 Dividends HorizonTable
A Table assemblyC Round shapeX X Base30 Overall width in inches30 Overall depth in inches114 Base finish114 Laminate top finish114 Edgeband finish
Included with:
X Base Table:
• (1) X Base• Hardware kit• Table top
Note: X Base Tables are finishedwith textured paint, including 613Silver.
Note: X Base Tables are onlyavailable in Knoll core finishes.
Options
Knoll Office Tables
223
Div
iden
dsH
oriz
on
X Base TablesRounded Square Table Tops17�, 21�, 28�, 36� and 42� High
description w * w d t h pattern no.
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
17� High Rounded Square X Base Table 30� 2913/16� 2913/16� 11/4� 17� DT1ADX303017 $922. $1,018. $1,059. $2,060. $2,266. $2,358.36� 3513/16� 3513/16� 11/4� 17� DT1ADX363617 960. 1,058. 1,101. 2,141. 2,357. 2,453.42� 4113/16� 4113/16� 11/4� 17� DT1ADX424217 1,062. 1,170. 1,218. 2,244. 2,471. 2,570.48� 4713/16� 4713/16� 11/4� 17� DT1ADX484817 1,114. 1,228. 1,277. 2,305. 2,538. 2,640.
21� High Rounded Square X Base Table 30� 2913/16� 2913/16� 11/4� 21� DT1ADX303021 922. 1,018. 1,059. 2,060. 2,266. 2,358.36� 3513/16� 3513/16� 11/4� 21� DT1ADX363621 960. 1,058. 1,101. 2,141. 2,357. 2,453.42� 4113/16� 4113/16� 11/4� 21� DT1ADX424221 1,062. 1,170. 1,218. 2,244. 2,471. 2,570.48� 4713/16� 4713/16� 11/4� 21� DT1ADX484821 1,114. 1,228. 1,277. 2,305. 2,538. 2,640.
28� High Rounded Square X Base Table 30� 2913/16� 2913/16� 11/4� 281/2� DT1ADX3030 944. 1,038. 1,079. 2,081. 2,287. 2,380.36� 3513/16� 3513/16� 11/4� 281/2� DT1ADX3636 981. 1,078. 1,121. 2,161. 2,379. 2,473.42� 4113/16� 4113/16� 11/4� 281/2� DT1ADX4242 1,082. 1,191. 1,238. 2,265. 2,491. 2,592.48� 4713/16� 4713/16� 11/4� 281/2� DT1ADX4848 1,136. 1,248. 1,298. 2,325. 2,558. 2,661.
36� High Rounded Square X Base Table 30� 2913/16� 2913/16� 11/4� 36� DT1ADX303036 995. 1,089. 1,130. 2,132. 2,338. 2,431.36� 3513/16� 3513/16� 11/4� 36� DT1ADX363636 1,032. 1,129. 1,173. 2,214. 2,430. 2,524.42� 4113/16� 4113/16� 11/4� 36� DT1ADX424236 1,135. 1,242. 1,289. 2,316. 2,543. 2,643.48� 4713/16� 4713/16� 11/4� 36� DT1ADX484836 1,187. 1,300. 1,350. 2,378. 2,610. 2,712.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/16�
Ordering Information
X Base Table:
1. Pattern number2. Base Paint Finish3. Top Finish4. Edge Finish
Order Code
X Base Table:
Example: DT1ADX3030, 114, 114,114
DT1 Dividends HorizonTable
A Table assemblyD Rounded Square shapeX X Base30 Overall width in inches30 Overall depth in inches114 Base finish114 Laminate top finish114 Edgeband finish
Included with:
X Base Table:
• (1) X Base• Hardware kit• Table top
Note: X Base Tables are finishedwith textured paint, including 613Silver.
Note: X Base Tables are onlyavailable in Knoll core finishes.
Options
Knoll Office Tables
224
X Base TablesRounded Square Table Tops17�, 21�, 28�, 36� and 42� High
description w * w d t h pattern no.
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
42� High Rounded Square X Base Table 30� 2913/16� 2913/16� 11/4� 42� DT1ADX303042 $1,016. $1,110. $1,152. $2,152. $2,358. $2,452.36� 3513/16� 3513/16� 11/4� 42� DT1ADX363642 1,053. 1,151. 1,194. 2,234. 2,450. 2,545.42� 4113/16� 4113/16� 11/4� 42� DT1ADX424242 1,155. 1,263. 1,310. 2,337. 2,563. 2,664.48� 4713/16� 4713/16� 11/4� 42� DT1ADX484842 1,207. 1,320. 1,370. 2,398. 2,631. 2,732.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/16�
Ordering Information
X Base Table:
1. Pattern number2. Base Paint Finish3. Top Finish4. Edge Finish
Order Code
X Base Table:
Example: DT1ADX3030, 114, 114,114
DT1 Dividends HorizonTable
A Table assemblyD Rounded Square shapeX X Base30 Overall width in inches30 Overall depth in inches114 Base finish114 Laminate top finish114 Edgeband finish
Included with:
X Base Table:
• (1) X Base• Hardware kit• Table top
Note: X Base Tables are finishedwith textured paint, including 613Silver.
Note: X Base Tables are onlyavailable in Knoll core finishes.
Options
Knoll Office Tables
225
Div
iden
dsH
oriz
on
Table SupportsX BasesCredenza Support Spacer
description w h d pattern no. P1 P2 P3
Small X-Base, for use with 30� or 36� wide round,square or rounded square table tops
17� DT1BXS17 $490. $542. $565.21� DT1BXS21 490. 542. 565.28� DT1BXS 510. 563. 585.36� DT1BXS36 563. 614. 636.42� DT1BXS42 583. 634. 657.
Large X Base, for use with 42� or 48� wide round,square or rounded square table tops
17� DT1BXL17 541. 598. 622.21� DT1BXL21 541. 598. 622.28� DT1BXL 562. 618. 643.36� DT1BXL36 613. 669. 694.42� DT1BXL42 633. 690. 714.
Credenza Support SpacerFor use with Dividends Horizon Credenza
95/8� 215/16� 19/16� DT1S 136. 150. 156.
Small T-Base, for use with 24� or 30� deep tops 28� DT1BTS 510. 563. 585.
Largel T-Base, for use with 24� or 30� deep tops 28� DT1BTL 562. 618. 643.
Ordering Information
Table Supports:
1. Pattern number2. Paint Finish
Order Code
X Base:
Example: DT1BXS, 114
DT1 Dividends HorizonTable
B BaseS X Shape114 Paint finishCredenza Support Spacer:
Example: DT1S, 114
DT1 Dividends Horizon TableS Support Spacer114 Paint finish
Included with:
X Base:
• X Base• Hardware kit
T Base:
• T Base• Hardware kit
Credenza Support spacer:
• Support spacer• Hardware Kit
Note: X and T bases are paintedwith textured paint, including 613Silver.
Note:Table supports are onlyavailable in Knoll core finishes.
Options
Knoll Office Tables
226
wing
Dividends Horizon Conference Tables Dividends Horizon conference tables are designed with a scale and visual language consistent with the full scope of Dividends Horizon products. This design consistency makes Dividends Horizon tables appropriate for use in conference, meeting, private office and open plan office applications.
Dividends Horizon conference tables are available in racetrack, rectangular, or boat shape and in all standard Dividends Horizon finishes.
Conference tables include a table top and base assembly. A conference table base assembly includes two Y legs, one center support T base, and two horizontal stretchers that connect the three bases. Top sizes up to 120 inches are produced in one piece, while tops longer than 120 inches are produced in two pieces.
Available Sizes Width: 102- 144 inches Depth: 36- 48 inches Height: 28-1/2 inches
Construction Worksurface:
laminate or 0.6mm thick veneer on 1-1/8 inch thick particle board core
2mm edgeband; Techwood tops have a 3/16" thick Techwood edge
Base:
3/16 inch thick structural plate
Note: Dividends Horizon conference tables are only available in Knoll Core paint, laminate, and Techwood finishes. Legacy finishes are not available. All paint finishes have the Dividends Horizon textured paint finish; this includes 613 Silver, which is a smooth paint on all other Dividends Horizon products.
Note: Grain patterns on woodgrain laminate and veneer tops will not match at the seam in the middle of tables longer than 120 inches.
Rectangular Conference Table Racetrack Conference Table
Boat Shape Conference Table
Conference TablesSpecifications
Knoll Office Tables
227
Div
iden
dsH
oriz
on
Conference TablesRectangular Table Top36�, 42� and 48� Deep
description w * w d t h pattern no.
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
36� Deep RectangularConference Table
102� 10113/16� 351/2� 11/4� 281/2� DT1ARY10236N $2,164. $2,215. $2,266. $2,472. $2,576. $2,782.108� 10713/16� 351/2� 11/4� 281/2� DT1ARY10836N 2,215. 2,266. 2,317. 2,523. 2,775. 2,887.
42� Deep RectangularConference Table
102� 10113/16� 411/2� 11/4� 281/2� DT1ARY10242N 2,215. 2,266. 2,317. 2,523. 2,627. 2,833.108� 10713/16� 411/2� 11/4� 281/2� DT1ARY10842N 2,266. 2,317. 2,370. 2,549. 2,833. 2,973.120� 11913/16� 411/2� 11/4� 281/2� DT1ARY12042N 2,423. 2,474. 2,525. 2,648. 2,913. 3,030.132� 13113/16� 411/2� 11/4� 281/2� DT1ARY13242N 2,525. 2,578. 2,629. 3,079. 3,386. 3,523.144� 14313/16� 411/2� 11/4� 281/2� DT1ARY14442N 2,629. 2,680. 2,731. 3,509. 3,861. 4,014.
48� Deep RectangularConference Table
102� 10113/16� 471/2� 11/4� 281/2� DT1ARY10248N 2,266. 2,317. 2,370. 2,576. 2,729. 2,935.108� 10713/16� 471/2� 11/4� 281/2� DT1ARY10848N 2,317. 2,370. 2,421. 2,652. 2,910. 3,039.120� 11913/16� 471/2� 11/4� 281/2� DT1ARY12048N 2,481. 2,532. 2,585. 2,725. 2,999. 3,118.132� 13113/16� 471/2� 11/4� 281/2� DT1ARY13248N 2,585. 2,636. 2,687. 3,164. 3,480. 3,620.144� 14313/16� 471/2� 11/4� 281/2� DT1ARY14448N 2,687. 2,738. 2,791. 3,601. 3,962. 4,121.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/16�
Ordering Information
Conference Tables:
1. Pattern number2. Base/Stretcher Paint Finish3. Top Finish4. Edge Finish
Order Code
Conference Table:
Example: DT1ARY10836N
DT1 Dividends HorizonTable
A Table AssemblyR Rectangular shapeY Y Leg Base108 Overall width in inches36 Overall depth in inchesN No grommet114 Base/ stretcher paint
finish114 Laminate top finish114 Edgeband finish
Included with:
Conference Table:
• (2) Y Legs• (1) T leg• (2) Stretchers• Table Top• Hardware Kit
Options
Conference Tables
Knoll Office Tables
228
Conference TablesRacetrack Table Top36�, 42� and 48� Deep
description w w d t h pattern no.
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
36� Deep RacetrackConference Table
102� 10113/16� 351/2� 11/4� 281/2� DT1ATY10236N $2,164. $2,215. $2,266. $3,194. $3,502. $3,606.108� 10713/16� 351/2� 11/4� 281/2� DT1ATY10836N 2,215. 2,266. 2,317. 3,240. 3,564. 3,706.
42� Deep RacetrackConference Table
102� 10113/16� 411/2� 11/4� 281/2� DT1ATY10242N 2,215. 2,266. 2,317. 3,219. 3,553. 3,708.108� 10713/16� 411/2� 11/4� 281/2� DT1ATY10842N 2,266. 2,317. 2,370. 3,296. 3,606. 3,759.120� 11913/16� 411/2� 11/4� 281/2� DT1ATY12042N 2,423. 2,474. 2,525. 3,364. 3,701. 3,849.132� 13113/16� 411/2� 11/4� 281/2� DT1ATY13242N 2,525. 2,578. 2,629. 3,863. 4,249. 4,418.144� 14313/16� 411/2� 11/4� 281/2� DT1ATY14442N 2,629. 2,680. 2,731. 4,360. 4,795. 4,987.
48� Deep RacetrackConference Table
102� 10113/16� 471/2� 11/4� 281/2� DT1ATY10248N 2,266. 2,317. 2,370. 3,296. 3,579. 3,734.108� 10713/16� 471/2� 11/4� 281/2� DT1ATY10848N 2,317. 2,370. 2,421. 3,400. 3,657. 3,812.120� 11913/16� 471/2� 11/4� 281/2� DT1ATY12048N 2,481. 2,532. 2,585. 3,439. 3,783. 3,935.132� 13113/16� 471/2� 11/4� 281/2� DT1ATY13248N 2,585. 2,636. 2,687. 3,946. 4,340. 4,515.144� 14313/16� 471/2� 11/4� 281/2� DT1ATY14448N 2,687. 2,738. 2,791. 4,453. 4,898. 5,094.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/16�
Ordering Information
Conference Tables:
1. Pattern number2. Base/Stretcher Paint Finish3. Top Finish4. Edge Finish
Order Code
Conference Table:
Example: DT1ARY10836N
DT1 Dividends HorizonTable
A Table AssemblyR Rectangular shapeY Y Leg Base108 Overall width in inches36 Overall depth in inchesN No grommet114 Base/ stretcher paint
finish114 Laminate top finish114 Edgeband finish
Included with:
Conference Table:
• (2) Y Legs• (1) T leg• (2) Stretchers• Table Top• Hardware Kit
Options
Conference Tables
Knoll Office Tables
229
Div
iden
dsH
oriz
on
Conference TablesBoat Shape Table Top42� and 48� Deep
description w * w d t h pattern no.
LaminateTop
P1 Paint
LaminateTop
P2 Paint
LaminateTop
P3 Paint
TechgrainTop
P1 Paint
TechgrainTop
P2 Paint
TechgrainTop
P3 Paint
42� Deep Boat ShapeConference Table
102� 10113/16� 411/2� 11/4� 281/2� DT1ABY10242N $2,215. $2,266. $2,317. $3,219. $3,553. $3,708.108� 10713/16� 411/2� 11/4� 281/2� DT1ABY10842N 2,266. 2,317. 2,370. 3,296. 3,606. 3,759.120� 11913/16� 411/2� 11/4� 281/2� DT1ABY12042N 2,423. 2,474. 2,525. 3,364. 3,701. 3,849.132� 13113/16� 411/2� 11/4� 281/2� DT1ABY13242N 2,525. 2,578. 2,629. 3,863. 4,249. 4,418.144� 14313/16� 411/2� 11/4� 281/2� DT1ABY14442N 2,629. 2,680. 2,731. 4,360. 4,795. 4,987.
48� Deep Boat ShapeConference Table
102� 10113/16� 471/2� 11/4� 281/2� DT1ABY10248N 2,266. 2,317. 2,370. 3,296. 3,579. 3,734.108� 10713/16� 471/2� 11/4� 281/2� DT1ABY10848N 2,317. 2,370. 2,421. 3,400. 3,657. 3,812.120� 11913/16� 471/2� 11/4� 281/2� DT1ABY12048N 2,481. 2,532. 2,585. 3,439. 3,783. 3,935.132� 13113/16� 471/2� 11/4� 281/2� DT1ABY13248N 2,585. 2,636. 2,687. 3,946. 4,340. 4,515.144� 14313/16� 471/2� 11/4� 281/2� DT1ABY14448N 2,687. 2,738. 2,791. 4,453. 4,898. 5,094.
w* = nominal widthDimensions listed under w d t h are actual to the nearest 1/16�
Ordering Information
Conference Tables:
1. Pattern number2. Base/Stretcher Paint Finish3. Top Finish4. Edge Finish
Order Code
Conference Table:
Example: DT1ARY10836N
DT1 Dividends HorizonTable
A Table AssemblyR Rectangular shapeY Y Leg Base108 Overall width in inches36 Overall depth in inchesN No grommet114 Base/ stretcher paint
finish114 Laminate top finish114 Edgeband finish
Included with:
Conference Table:
• (2) Y Legs• (1) T leg• (2) Stretchers• Table Top• Hardware Kit
Options
Conference Tables
Knoll Office Tables
230
pattern no. page
AA1NSK 207
AA1WS24 184
AA1WS30 184
AA1WS36 184
AA1WS48 184
AA1WSD 184
AA2T5E19 184
AA2T5E25 184
AA2T5E37 184
AB1 CL24L 175
AB1 CL24R 175
AB1 CL30L 175
AB1 CL30R 175
AB1 CLF24L 175
AB1 CLF24R 175
AB1 CLF30L 175
AB1 CLF30R 175
AB1 F24 207
AB1 I25(G/C) 175
AB1 I27A(G/C) 175
AB1 I27F(G/C) 175
AB1 VL 175
AB1AS27 17
AB1AS28 17
AB1AS30 17
AB1ASC27 17
AB1ASC28 17
AB1ASC30 17
AB1AW27 17
AB1AW28 17
AD C35 SF 177
AD C35 SH 181
AD C36 SF 177
AD C36 SH 181
AD C4242 DF 178
AD C4242 LF 178
AD C4242 LH 182
AD C4242 RF 178
AD C4242 RH 182
AD C4242 SF 178
AD C4242 SH 182
AD C44 DF 178
AD C44 DH 182
AD C44 LF 178
AD C44 LH 182
AD C44 RF 178
AD C44 RH 182
AD C44 SF 178
AD C44 SH 182
AD C45 DF 177
AD C45 DH 181
AD C45 RF 177
AD C45 RH 181
AD C45 SF 177
AD C45 SH 181
AD C46 DF 177
AD C46 DH 181
AD C46 RF 177
AD C46 RH 181
AD C46 SF 177
AD C46 SH 181
pattern no. page
AD C47 DF 177
AD C47 DH 181
AD C47 RF 177
AD C47 RH 181
AD C47 SF 177
AD C47 SH 181
AD C53 SF 176
AD C53 SH 180
AD C54 DF 176
AD C54 DH 180
AD C54 LF 176
AD C54 LH 180
AD C54 SF 176
AD C54 SH 180
AD C55 DF 178
AD C55 DH 182
AD C55 LF 178
AD C55 LH 182
AD C55 RF 178
AD C55 RH 182
AD C55 SF 178
AD C55 SH 182
AD C63 SF 176
AD C63 SH 180
AD C64 DF 176
AD C64 DH 180
AD C64 LF 176
AD C64 LH 180
AD C64 SF 176
AD C64 SH 180
AD C74 DF 176
AD C74 DH 180
AD C74 LF 176
AD C74 LH 180
AD C74 SF 176
AD C74 SH 180
AD S36 DF 179
AD S36 DH 183
AD S36 SF 179
AD S36 SH 183
AD S42 DF 179
AD S42 DH 183
AD S42 SF 179
AD S42 SH 183
AD S48 DF 179
AD S48 DH 183
AD S48 SF 179
AD S48 SH 183
AD S60 DF 179
AD S60 DH 183
AD S60 SF 179
AD S60 SH 183
AD S72 DF 179
AD S72 DH 183
AD S72 SF 179
AD S72 SH 183
AD S84 SF 179
AD S84 SH 183
AHHSM36 18
AHHSM42 18
AHHSM48 18
pattern no. page
AHHSM54 18
AHHSM60 18
AHHSM66 18
AHHSM72 18
AHHSM78 18
AHHSM84 18
AHHSM90 18
AHHSM96 18
APTLL26 17
APTLL27 17
APTLL28 17
AR1 CB 207
AT1 D50A 187
AT1 D50F 187
AT1 D62A 187
AT1 D62F 187
AT1 E24LA 186
AT1 E24LF 186
AT1 E24RA 186
AT1 E24RF 186
AT1 P36A 185
AT1 P36F 185
AT1 R42A 187
AT1 R42F 187
AT1 R48A 187
AT1 R48F 187
AT1 TA 185
AT1 TL 185
AT1 W24A 185
AT1 W24F 185
AT1 W30A 186
AT1 W30F 186
AT1 W50A 187
AT1 W50F 187
ATA1R36 13
ATA1R42 13
ATA1R48 13
ATA1T44242 13
ATA1T44830 13
ATA1T44848 13
ATA1T46030 13
ATA1T47230 13
ATA1T47236 13
ATARLL3627(L/M/V) 14
ATARLL3628(L/M/V) 14
ATARLL4227(L/M/V) 14
ATARLL4228(L/M/V) 14
ATARLL4827(L/M/V) 14
ATARLL4828(L/M/V) 14
ATAT4LL424227(L/M/V) 14
ATAT4LL424228(L/M/V) 14
ATAT4LL484827(L/M/V) 14
ATAT4LL484828(L/M/V) 14
ATDT1LFM483027(L/M/V) 15
ATDT1LFM483028(L/M/V) 15
ATDT1LFM603027(L/M/V) 15
ATDT1LFM603028(L/M/V) 15
ATDT1LFM723027(L/M/V) 15
ATDT1LFM723028(L/M/V) 15
ATDT1LFM723627(L/M/V) 15
ATDT1LFM723628(L/M/V) 15
pattern no. page
ATDT1LFS483027(L/M/V) 15
ATDT1LFS483028(L/M/V) 15
ATDT1LFS603027(L/M/V) 15
ATDT1LFS603028(L/M/V) 15
ATDT1LFS723027(L/M/V) 15
ATDT1LFS723028(L/M/V) 15
ATDT1LFS723627(L/M/V) 15
ATDT1LFS723628(L/M/V) 15
ATDT1LPM483027(L/M/V) 15
ATDT1LPM483028(L/M/V) 15
ATDT1LPM603027(L/M/V) 15
ATDT1LPM603028(L/M/V) 15
ATDT1LPM723027(L/M/V) 15
ATDT1LPM723028(L/M/V) 15
ATDT1LPM723627(L/M/V) 15
ATDT1LPM723628(L/M/V) 15
ATDT1LPS483027(L/M/V) 16
ATDT1LPS483028(L/M/V) 16
ATDT1LPS603027(L/M/V) 16
ATDT1LPS603028(L/M/V) 16
ATDT1LPS723027(L/M/V) 16
ATDT1LPS723028(L/M/V) 16
ATDT1LPS723627(L/M/V) 16
ATDT1LPS723628(L/M/V) 16
ATDT4LL483027(L/M/V) 14
ATDT4LL483028(L/M/V) 14
ATDT4LL603027(L/M/V) 14
ATDT4LL603028(L/M/V) 14
ATDT4LL723027(L/M/V) 14
ATDT4LL723028(L/M/V) 14
ATDT4LL723627(L/M/V) 14
ATDT4LL723628(L/M/V) 14
AUP B3624M 208
AUP B3624RC 208
AUP B4824M 208
AUP B4824RC 208
AUP B6024M 208
AUP B6024RC 208
AUP B7224M 208
AUP B7224RC 208
AUP C4872S5 194
AUP C7248S5 194
AUP D624 196
AUP M72DC4 193
AUP M72DF4 193
AUP MR36 208
AUP MR48 208
AUP MR60 208
AUP MR72 208
AUP O664 196
AUP PDU 207
AUP R424 196
AUP S48D4 195
AUP S48S2 195
AUP S48S4 195
AUP S60D4 195
AUP S72D4 195
AUP S72E4 195
AUP T363 196
AUP V48S5 194
AUP W60D4 196
Alpha-Numeric Index
231
pattern no. page
AUP Y72DCL4 193
AUP Y72DCR4 193
AUP Y72DFL4 193
AUP Y72DFR4 193
AUPCCV 197
AUPCGV 197
AUPLC4 207
AUPLC5 207
AUPM C3660S5 203
AUPM C3672S5 203
AUPM C4242D5 200
AUPM C4242S5 200
AUPM C4260L5 204
AUPM C4260R5 203
AUPM C4260S5 203
AUPM C4272L5 204
AUPM C4272R5 203
AUPM C4272S5 203
AUPM C4848D5 200
AUPM C4848S5 200
AUPM C4860D5 203
AUPM C4860L5 204
AUPM C4860R5 203
AUPM C4860S5 203
AUPM C4872D5 203
AUPM C4872L5 204
AUPM C4872R5 203
AUPM C4872S5 203
AUPM C4884D5 203
AUPM C4884L5 204
AUPM C4884R5 203
AUPM C4884S5 203
AUPM C6036S5 201
AUPM C6042L5 201
AUPM C6042R5 202
AUPM C6042S5 201
AUPM C6048D5 201
AUPM C6048L5 201
AUPM C6048R5 202
AUPM C6048S5 201
AUPM C6060D5 200
AUPM C6060S5 200
AUPM C7236S5 201
AUPM C7242L5 201
AUPM C7242R5 202
AUPM C7242S5 201
AUPM C7248D5 201
AUPM C7248L5 201
AUPM C7248R5 202
AUPM C7248S5 201
AUPM C8448D5 201
AUPM C8448L5 201
AUPM C8448R5 202
AUPM C8448S5 201
AUPM D594 205
AUPM D604 205
AUPM P4875S5 205
AUPM P7548S5 205
AUPM S30D4 198
AUPM S30S4 198
AUPM S36D4 198
AUPM S36S2 199
AUPM S36S4 198
AUPM S42D4 198
AUPM S42S2 199
pattern no. page
AUPM S42S4 198
AUPM S48D4 198
AUPM S48S2 199
AUPM S48S4 198
AUPM S54D4 198
AUPM S54S4 198
AUPM S60D4 198
AUPM S60S2 199
AUPM S60S4 198
AUPM S66D4 198
AUPM S66S4 198
AUPM S72D4 198
AUPM S72S4 198
AUPM S84D4 198
AUPM S84S4 198
AUPM SCV 206
AUPM SGV 206
DT1ABY10242N 230
DT1ABY10248N 230
DT1ABY10842N 230
DT1ABY10848N 230
DT1ABY12042N 230
DT1ABY12048N 230
DT1ABY13242N 230
DT1ABY13248N 230
DT1ABY14442N 230
DT1ABY14448N 230
DT1ACX30 223
DT1ACX3017 223
DT1ACX3021 223
DT1ACX3036 223
DT1ACX3042 223
DT1ACX36 223
DT1ACX3617 223
DT1ACX3621 223
DT1ACX3636 223
DT1ACX3642 223
DT1ACX42 223
DT1ACX4217 223
DT1ACX4221 223
DT1ACX4236 223
DT1ACX4242 223
DT1ACX48 223
DT1ACX4817 223
DT1ACX4821 223
DT1ACX4836 223
DT1ACX4842 223
DT1ADX3030 224
DT1ADX303017 224
DT1ADX303021 224
DT1ADX303036 224
DT1ADX303042 225
DT1ADX3636 224
DT1ADX363617 224
DT1ADX363621 224
DT1ADX363636 224
DT1ADX363642 225
DT1ADX4242 224
DT1ADX424217 224
DT1ADX424221 224
DT1ADX424236 224
DT1ADX424242 225
DT1ADX4848 224
DT1ADX484817 224
DT1ADX484821 224
pattern no. page
DT1ADX484836 224
DT1ADX484842 225
DT1ARY10236N 228
DT1ARY10242N 228
DT1ARY10248N 228
DT1ARY10836N 228
DT1ARY10842N 228
DT1ARY10848N 228
DT1ARY12042N 228
DT1ARY12048N 228
DT1ARY13242N 228
DT1ARY13248N 228
DT1ARY14442N 228
DT1ARY14448N 228
DT1ARY6024NS 215
DT1ARY6030NS 215
DT1ARY6036N 216
DT1ARY6624NS 215
DT1ARY6630NS 215
DT1ARY6636N 216
DT1ARY7224NS 215
DT1ARY7230NS 215
DT1ARY7236N 216
DT1ARY7824NS 215
DT1ARY7830NS 215
DT1ARY7836N 216
DT1ARY8424NS 215
DT1ARY8430NS 215
DT1ARY8436N 216
DT1ARY8442N 216
DT1ARY9024NS 215
DT1ARY9030NS 215
DT1ARY9036N 216
DT1ARY9042N 216
DT1ARY9624NS 215
DT1ARY9630NS 215
DT1ARY9636N 216
DT1ARY9642N 216
DT1ASX3030 222
DT1ASX303017 222
DT1ASX303021 222
DT1ASX303036 222
DT1ASX303042 222
DT1ASX3636 222
DT1ASX363617 222
DT1ASX363621 222
DT1ASX363636 222
DT1ASX363642 222
DT1ASX4242 222
DT1ASX424217 222
DT1ASX424221 222
DT1ASX424236 222
DT1ASX424242 222
DT1ASX4848 222
DT1ASX484817 222
DT1ASX484821 222
DT1ASX484836 222
DT1ASX484842 222
DT1ATY10236N 229
DT1ATY10242N 229
DT1ATY10248N 229
DT1ATY10836N 229
DT1ATY10842N 229
DT1ATY10848N 229
DT1ATY12042N 229
pattern no. page
DT1ATY12048N 229
DT1ATY13242N 229
DT1ATY13248N 229
DT1ATY14442N 229
DT1ATY14448N 229
DT1ATY6024NS 217
DT1ATY6030NS 217
DT1ATY6036N 218
DT1ATY6624NS 217
DT1ATY6630NS 217
DT1ATY6636N 218
DT1ATY7224NS 217
DT1ATY7230NS 217
DT1ATY7236N 218
DT1ATY7824NS 217
DT1ATY7830NS 217
DT1ATY7836N 218
DT1ATY8424NS 217
DT1ATY8430NS 217
DT1ATY8436N 218
DT1ATY8442N 218
DT1ATY9024NS 217
DT1ATY9030NS 217
DT1ATY9036N 218
DT1ATY9042N 218
DT1ATY9624NS 217
DT1ATY9630NS 217
DT1ATY9636N 218
DT1ATY9642N 218
DT1BTL 226
DT1BTS 226
DT1BXL 226
DT1BXL17 226
DT1BXL21 226
DT1BXL36 226
DT1BXL42 226
DT1BXS 226
DT1BXS17 226
DT1BXS21 226
DT1BXS36 226
DT1BXS42 226
DT1CRY6024N 219
DT1CRY6030N 219
DT1CRY6036N 219
DT1CRY6624N 219
DT1CRY6630N 219
DT1CRY6636N 219
DT1CRY7224N 219
DT1CRY7230N 219
DT1CRY7236N 219
DT1CRY7824N 219
DT1CRY7830N 219
DT1CRY7836N 219
DT1CRY8424N 219
DT1CRY8430N 219
DT1CRY8436N 219
DT1CRY9024N 219
DT1CRY9030N 219
DT1CRY9036N 219
DT1CRY9624N 219
DT1CRY9630N 219
DT1CRY9636N 219
DT1CTY6024N 220
DT1CTY6030N 220
DT1CTY6036N 220
Knoll Office Tables
232
pattern no. page
DT1CTY6624N 220
DT1CTY6630N 220
DT1CTY6636N 220
DT1CTY7224N 220
DT1CTY7230N 220
DT1CTY7236N 220
DT1CTY7824N 220
DT1CTY7830N 220
DT1CTY7836N 220
DT1CTY8424N 220
DT1CTY8430N 220
DT1CTY8436N 220
DT1CTY9024N 220
DT1CTY9030N 220
DT1CTY9036N 220
DT1CTY9624N 220
DT1CTY9630N 220
DT1CTY9636N 220
DT1S 226
ET1OT3672 213
ET1OT48120 213
ET1OT4896 213
ET1OT54120 213
ET1OT60144 213
ET1RCT3048 212
ET1RCT3060 212
ET1RCT3072 212
ET1RCT3469 212
ET1RCT3479 212
ET1RCT3660 212
ET1RCT3672 212
ET1RCT4284 212
ET1RCT4896 212
ET1RT30 212
ET1RT36 212
ET1RT36C 212
ET1RT42 212
ET1RT48 212
ET1RT60 212
ET1ST22C 212
ET1ST2416 212
ET1ST30 212
ET1ST36 212
ET1ST42 212
ET1ST48 212
ET1ST60 212
IB 22DE 167
IB 22SE 167
IB 27DA 166
IB 27DB 166
IB 27DC 166
IB 27DSC 167
IB 27SA 166
IB 27SB 166
IB 27SC 166
IB 28DE 167
IB 28SE 167
IB 28W 168
IB 28X 168
IB 28Y 168
IB 32M 168
IB 32W 168
IB 32X 168
IB 32Y 168
IB 33DA 166
pattern no. page
IB 33DB 166
IB 33DC 166
IB 33DSA 167
IB 33DSB 167
IB 33DSC 167
IB 33SA 166
IB 33SB 166
IB 33SC 166
IB 34DE 167
IB 34SE 167
IB 39DA 166
IB 39DB 166
IB 39DC 166
IB 39DSA 167
IB 39DSB 167
IB 39DSC 167
IB 39SA 166
IB 39SB 166
IB 39SC 166
IB 39T 167
IB 40DE 167
IB 40SE 167
IB 45DA 166
IB 45DB 166
IB 45DC 166
IB 45DSA 167
IB 45DSB 167
IB 45DSC 167
IB 45SA 166
IB 45SB 166
IB 45SC 166
IB 45T 167
IB 48X 168
IB 52DE 167
IB 52SE 167
IB 57DA 166
IB 57DB 166
IB 57DC 166
IB 57SA 166
IB 57SB 166
IB 57SC 166
IB 57T 167
IB 58DE 168
IB 58SE 168
IB ST 18 168
IB ST 22 168
IB ST 28 168
IB ST 44 168
IBZ 168
IC 169
ICEC3624E 165
ICEC4224A 161
ICEC4224B 160
ICEC4224D 162
ICEC4224E 165
ICEC4224K 164
ICEC4824A 161
ICEC4824B 160
ICEC4824D 162
ICEC4824E 165
ICEC4824K 164
ICEC4830A 161
ICEC4830B 160
ICEC4830D 162
ICEC4830E 165
pattern no. page
ICEC4830K 164
ICER3000W 159
ICER3000X 159
ICER3000Y 159
ICER3600W 159
ICER3600X 159
ICER3600Y 159
ICER4200W 159
ICER4200X 159
ICER4200Y 159
ICER4800X 159
ICER4800Y 159
ICES3024A 161
ICES3024B 160
ICES3024C 163
ICES3024D(R/L) 162
ICES3024E 165
ICES3024K 164
ICES3030A 161
ICES3030B 160
ICES3030C 163
ICES3030D(R/L) 162
ICES3030E 165
ICES3030K 164
ICES3624A 161
ICES3624B 160
ICES3624C 163
ICES3624D(R/L) 162
ICES3624E 165
ICES3624K 164
ICES3630A 161
ICES3630B 160
ICES3630C 163
ICES3630D(R/L) 162
ICES3630E 165
ICES3630K 164
ICES4224A 161
ICES4224B 160
ICES4224C 163
ICES4224D(R/L) 162
ICES4224E 165
ICES4224K 164
ICES4230A 161
ICES4230B 160
ICES4230C 163
ICES4230D(R/L) 162
ICES4230E 165
ICES4230K 164
ICES4824A 161
ICES4824B 160
ICES4824C 163
ICES4824D(R/L) 162
ICES4824E 165
ICES4824K 164
ICES4830A 161
ICES4830B 160
ICES4830C 163
ICES4830D(R/L) 162
ICES4830E 165
ICES4830K 164
ICES6024A 161
ICES6024B 160
ICES6024C 163
ICES6024D(R/L) 162
ICES6024E 165
pattern no. page
ICES6024K 164
ICES6030A 161
ICES6030B 160
ICES6030C 163
ICES6030D(R/L) 162
ICES6030E 165
ICES6030K 164
ICES7224A 161
ICES7224B 160
ICES7230A 161
ICES7230B 160
ID C3624 E2 158
ID C4224 A2 152
ID C4224 B2 151
ID C4224 D2 153
ID C4224 E2 158
ID C4224 K2 157
ID C4824 A2 152
ID C4824 B2 151
ID C4824 D2 153
ID C4824 E2 158
ID C4824 K2 157
ID C4830 A2 152
ID C4830 B2 151
ID C4830 D2 153
ID C4830 E2 158
ID C4830 K2 157
ID C48DS A2 156
ID C48DS B2 156
ID C48DS D2 156
ID C48DS E2 158
ID C48DS K2 157
ID C48SS A2 156
ID C48SS B2 156
ID C48SS D2 156
ID C48SS E2 158
ID C48SS K2 157
ID R3000 W2 150
ID R3000 X2 150
ID R3000 Y2 150
ID R3600 W2 150
ID R3600 X2 150
ID R3600 Y2 150
ID R4200 W2 150
ID R4200 X2 150
ID R4200 Y2 150
ID R4800 X2 150
ID R4800 Y2 150
ID S3024 A2 152
ID S3024 B2 151
ID S3024 C2 154
ID S3024 D(R/L)2 153
ID S3024 E2 158
ID S3024 K2 157
ID S3030 A2 152
ID S3030 B2 151
ID S3030 C2 154
ID S3030 D(R/L)2 153
ID S3030 E2 158
ID S3030 K2 157
ID S3624 A2 152
ID S3624 B2 151
ID S3624 C2 154
ID S3624 D(R/L)2 153
ID S3624 E2 158
Knoll Office Tables
233
pattern no. page
ID S3624 K2 157
ID S3630 A2 152
ID S3630 B2 151
ID S3630 C2 154
ID S3630 D(R/L)2 153
ID S3630 E2 158
ID S3630 K2 157
ID S36DS A2 156
ID S36DS B2 156
ID S36DS D2 156
ID S4224 A2 152
ID S4224 B2 151
ID S4224 C2 154
ID S4224 D(R/L)2 153
ID S4224 E2 158
ID S4224 K2 157
ID S4230 A2 152
ID S4230 B2 151
ID S4230 C2 154
ID S4230 D(R/L)2 153
ID S4230 E2 158
ID S4230 K2 157
ID S42DS K2 157
ID S4824 A2 152
ID S4824 B2 151
ID S4824 C2 154
ID S4824 D(R/L)2 153
ID S4824 E2 158
ID S4824 K2 157
ID S4830 A2 152
ID S4830 B2 151
ID S4830 C2 154
ID S4830 D(R/L)2 153
ID S4830 E2 158
ID S4830 K2 157
ID S4830 T2 155
ID S4836 T2 155
ID S48DS A2 156
ID S48DS B2 156
ID S48DS D2 156
ID S48DS K2 157
ID S6024 A2 152
ID S6024 B2 151
ID S6024 C2 154
ID S6024 D(R/L)2 153
ID S6024 E2 158
ID S6024 K2 157
ID S6030 A2 152
ID S6030 B2 151
ID S6030 C2 154
ID S6030 D(R/L)2 153
ID S6030 E2 158
ID S6030 K2 157
ID S6030 T2 155
ID S6036 T2 155
ID S7224 A2 152
ID S7224 B2 151
ID S7230 A2 152
ID S7230 B2 151
ID S7230 T2 155
ID S7236 T2 155
ID U6330 T2 155
ID U6636 T2 155
ID U7530 T2 155
ID U7836 T2 155
pattern no. page
IE C3624 E2 140
IE C4224 A2 134
IE C4224 B2 133
IE C4224 D2 135
IE C4224 E2 140
IE C4224 K2 139
IE C4824 A2 134
IE C4824 B2 133
IE C4824 D2 135
IE C4824 E2 140
IE C4824 K2 139
IE C4830 A2 134
IE C4830 B2 133
IE C4830 D2 135
IE C4830 E2 140
IE C4830 K2 139
IE C48DS A2 138
IE C48DS B2 138
IE C48DS D2 138
IE C48DS E2 140
IE C48DS K2 139
IE C48SS A2 138
IE C48SS B2 138
IE C48SS D2 138
IE C48SS E2 140
IE C48SS K2 139
IE R3000 W2 131
IE R3000 W3 132
IE R3000 X2 131
IE R3000 X3 132
IE R3000 Y2 131
IE R3000 Y3 132
IE R3600 W2 131
IE R3600 W3 132
IE R3600 X2 131
IE R3600 X3 132
IE R3600 Y2 131
IE R3600 Y3 132
IE R4200 W2 131
IE R4200 W3 132
IE R4200 X2 131
IE R4200 X3 132
IE R4200 Y2 131
IE R4200 Y3 132
IE R4800 X2 131
IE R4800 X3 132
IE R4800 Y2 131
IE R4800 Y3 132
IE S3024 A2 134
IE S3024 B2 133
IE S3024 C2 136
IE S3024 D(R/L)2 135
IE S3024 E2 140
IE S3024 K2 139
IE S3030 A2 134
IE S3030 B2 133
IE S3030 C2 136
IE S3030 D(R/L)2 135
IE S3030 E2 140
IE S3030 K2 139
IE S3624 A2 134
IE S3624 B2 133
IE S3624 C2 136
IE S3624 D(R/L)2 135
IE S3624 E2 140
pattern no. page
IE S3624 K2 139
IE S3630 A2 134
IE S3630 B2 133
IE S3630 C2 136
IE S3630 D(R/L)2 135
IE S3630 E2 140
IE S3630 K2 139
IE S36DS A2 138
IE S36DS B2 138
IE S36DS D2 138
IE S4224 A2 134
IE S4224 B2 133
IE S4224 C2 136
IE S4224 D(R/L)2 135
IE S4224 E2 140
IE S4224 K2 139
IE S4230 A2 134
IE S4230 B2 133
IE S4230 C2 136
IE S4230 D(R/L)2 135
IE S4230 E2 140
IE S4230 K2 139
IE S42DS K2 139
IE S4824 A2 134
IE S4824 B2 133
IE S4824 C2 136
IE S4824 D(R/L)2 135
IE S4824 E2 140
IE S4824 K2 139
IE S4830 A2 134
IE S4830 B2 133
IE S4830 C2 136
IE S4830 D(R/L)2 135
IE S4830 E2 140
IE S4830 K2 139
IE S4830 T2 137
IE S4836 T2 137
IE S48DS A2 138
IE S48DS B2 138
IE S48DS D2 138
IE S48DS K2 139
IE S6024 A2 134
IE S6024 B2 133
IE S6024 C2 136
IE S6024 D(R/L)2 135
IE S6024 E2 140
IE S6024 K2 139
IE S6030 A2 134
IE S6030 B2 133
IE S6030 C2 136
IE S6030 D(R/L)2 135
IE S6030 E2 140
IE S6030 K2 139
IE S6030 T2 137
IE S6036 T2 137
IE S7224 A2 134
IE S7224 B2 133
IE S7230 A2 134
IE S7230 B2 133
IE S7230 T2 137
IE S7236 T2 137
IE U6330 T2 137
IE U6636 T2 137
IE U7530 T2 137
IE U7836 T2 137
pattern no. page
IEC2 168
IFP30 169
IFP36 169
IFP42 169
IFP48 169
IFP60 169
IN C3624 E 130
IN C4224 A 124
IN C4224 B 123
IN C4224 D 125
IN C4224 E 130
IN C4224 K 129
IN C4824 A 124
IN C4824 B 123
IN C4824 D 125
IN C4824 E 130
IN C4824 K 129
IN C4830 A 124
IN C4830 B 123
IN C4830 D 125
IN C4830 E 130
IN C4830 K 129
IN C48DS A 128
IN C48DS B 128
IN C48DS D 128
IN C48DS E 130
IN C48DS K 129
IN C48SS A 128
IN C48SS B 128
IN C48SS D 128
IN C48SS E 130
IN C48SS K 129
IN R3000 W 122
IN R3000 X 122
IN R3000 Y 122
IN R3600 W 122
IN R3600 X 122
IN R3600 Y 122
IN R4200 W 122
IN R4200 X 122
IN R4200 Y 122
IN R4800 X 122
IN R4800 Y 122
IN S3024 A 124
IN S3024 B 123
IN S3024 C 126
IN S3024 D(R/L) 125
IN S3024 E 130
IN S3024 K 129
IN S3030 A 124
IN S3030 B 123
IN S3030 D(R/L) 125
IN S3030 E 130
IN S3030 K 129
IN S3030C 126
IN S3624 A 124
IN S3624 B 123
IN S3624 C 126
IN S3624 D(R/L) 125
IN S3624 E 130
IN S3624 K 129
IN S3630 A 124
IN S3630 B 123
IN S3630 C 126
IN S3630 D(R/L) 125
Knoll Office Tables
234
pattern no. page
IN S3630 E 130
IN S3630 K 129
IN S36DS A 128
IN S36DS B 128
IN S36DS D 128
IN S36DS K 129
IN S4224 A 124
IN S4224 B 123
IN S4224 C 126
IN S4224 D(R/L) 125
IN S4224 E 130
IN S4224 K 129
IN S4230 A 124
IN S4230 B 123
IN S4230 C 126
IN S4230 D(R/L) 125
IN S4230 E 130
IN S4230 K 129
IN S42DS A 128
IN S42DS B 128
IN S42DS D 128
IN S42DS K 129
IN S4824 A 124
IN S4824 B 123
IN S4824 C 126
IN S4824 D(R/L) 125
IN S4824 E 130
IN S4824 K 129
IN S4830 A 124
IN S4830 B 123
IN S4830 C 126
IN S4830 D(R/L) 125
IN S4830 E 130
IN S4830 K 129
IN S4830T 127
IN S4836T 127
IN S48DS A 128
IN S48DS B 128
IN S48DS D 128
IN S48DS K 129
IN S6024 A 124
IN S6024 B 123
IN S6024 C 126
IN S6024 D(R/L) 125
IN S6024 E 130
IN S6024 K 129
IN S6030 A 124
IN S6030 B 123
IN S6030 C 126
IN S6030 D(R/L) 125
IN S6030 E 130
IN S6030 K 129
IN S6030T 127
IN S6036T 127
IN S7230T 127
IN S7236T 127
IN U6330T 127
IN U6636T 127
IN U7530T 127
IN U7836T 127
IS C3624 E 149
IS C4224 A 143
IS C4224 B 142
IS C4224 D 144
IS C4224 E 149
pattern no. page
IS C4224 K 148
IS C4824 A 143
IS C4824 B 142
IS C4824 D 144
IS C4824 E 149
IS C4824 K 148
IS C4830 A 143
IS C4830 B 142
IS C4830 D 144
IS C4830 E 149
IS C4830 K 148
IS C48DS A 147
IS C48DS B 147
IS C48DS D 147
IS C48DS E 149
IS C48DS K 148
IS C48SS A 147
IS C48SS B 147
IS C48SS D 147
IS C48SS E 149
IS C48SS K 148
IS R3000 W 141
IS R3000 X 141
IS R3000 Y 141
IS R3600 W 141
IS R3600 X 141
IS R3600 Y 141
IS R4200 W 141
IS R4200 X 141
IS R4200 Y 141
IS R4800 X 141
IS R4800 Y 141
IS S3024 A 143
IS S3024 B 142
IS S3024 C 145
IS S3024 D(L/R) 144
IS S3024 E 149
IS S3024 K 148
IS S3030 A 143
IS S3030 B 142
IS S3030 C 145
IS S3030 D(L/R) 144
IS S3030 E 149
IS S3030 K 148
IS S3624 A 143
IS S3624 B 142
IS S3624 C 145
IS S3624 D(L/R) 144
IS S3624 E 149
IS S3624 K 148
IS S3630 A 143
IS S3630 B 142
IS S3630 C 145
IS S3630 D(L/R) 144
IS S3630 E 149
IS S3630 K 148
IS S36DS A 147
IS S36DS B 147
IS S36DS D 147
IS S36DS K 148
IS S4224 A 143
IS S4224 B 142
IS S4224 C 145
IS S4224 D(L/R) 144
IS S4224 E 149
pattern no. page
IS S4224 K 148
IS S4230 A 143
IS S4230 B 142
IS S4230 C 145
IS S4230 D(L/R) 144
IS S4230 E 149
IS S4230 K 148
IS S42DS A 147
IS S42DS B 147
IS S42DS D 147
IS S42DS K 148
IS S4824 A 143
IS S4824 B 142
IS S4824 C 145
IS S4824 D(L/R) 144
IS S4824 E 149
IS S4824 K 148
IS S4830 A 143
IS S4830 B 142
IS S4830 C 145
IS S4830 D(L/R) 144
IS S4830 E 149
IS S4830 K 148
IS S4830 T 146
IS S4836 T 146
IS S48DS A 147
IS S48DS B 147
IS S48DS D 147
IS S48DS K 148
IS S6024 A 143
IS S6024 B 142
IS S6024 C 145
IS S6024 D(L/R) 144
IS S6024 E 149
IS S6024 K 148
IS S6030 A 143
IS S6030 B 142
IS S6030 C 145
IS S6030 D(L/R) 144
IS S6030 E 149
IS S6030 K 148
IS S6030 T 146
IS S6036 T 146
IS S7230 T 146
IS S7236 T 146
IS U6330 T 146
IS U6636 T 146
IS U7530 T 146
IS U7836 T 146
IT A4860 Z 121
IT A6060 Z 120
IT B4848 A 117
IT B4848 B 117
IT B4848 C 117
IT B4848 D 117
IT B6060 A 117
IT B6060 B 117
IT B6060 C 117
IT B6060 D 117
IT C3624C 118
IT C36SSC 118
IT C4224C 118
IT C42SSC 118
IT C4824C 118
IT C4830C 118
pattern no. page
IT C48DSC 118
IT C48SSC 118
IT D3624 W 114
IT D3624 X 114
IT D3624 Y 114
IT D4230 W 114
IT D4230 X 114
IT D4230 Y 114
IT E3030 W 116
IT E3030 X 116
IT E3636 W 116
IT E3636 X 116
IT E4242 W 116
IT E4242 X 116
IT H5424 A 117
IT H5424 B 117
IT H5424 C 117
IT H5424 D 117
IT O7236 N 121
IT O7236 T 120
IT O8436 T 120
IT O9636 N 121
IT R3000 W 114
IT R3000 X 114
IT R3000 Y 114
IT R3600 W 114
IT R3600 X 114
IT R3600 Y 114
IT R4200 W 114
IT R4200 X 114
IT R4200 Y 114
IT R4800 X 114
IT R4800 Y 114
IT R6000 Z 120
IT S3030 W 116
IT S3030 X 116
IT S3030 Y 116
IT S30DSC 118
IT S3636 W 116
IT S3636 X 116
IT S3636 Y 116
IT S36DSC 118
IT S36DSCM 119
IT S3ODSCM 119
IT S4242 W 116
IT S4242 X 116
IT S4242 Y 116
IT S42DSC 118
IT S42DSCM 119
IT S48DSC 118
IT S48DSCM 119
IT T3618 W 115
IT T3618 X 115
IT T3618 Y 115
IT T4221 W 115
IT T4221 X 115
IT T4221 Y 115
IWM30 169
IWM36 169
IWM42 169
IWM48 169
IWM60 169
IXG 169
MM2-CG 207
MZ1-B3015 209
Knoll Office Tables
235
pattern no. page
MZ1-B3019 209
MZ1-B3022 209
MZ1-B3615 209
MZ1-B3619 209
MZ1-B3622 209
MZ1-B4215 209
MZ1-B4219 209
MZ1-B4222 209
MZ1-B4815 209
MZ1-B4819 209
MZ1-B4822 209
MZ1-B5415 209
MZ1-B5419 209
MZ1-B5422 209
MZ1-B6015 209
MZ1-B6019 209
MZ1-B6022 209
MZ1-B6615 209
MZ1-B6619 209
MZ1-B6622 209
MZ1-B7215 209
MZ1-B7219 209
MZ1-B7222 209
MZ1-B7815 209
MZ1-B7819 209
MZ1-B7822 209
MZ1-V3615 210
MZ1-V3619 210
MZ1-V3622 210
MZ1-V4215 210
MZ1-V4219 210
MZ1-V4222 210
MZ1-V4815 210
MZ1-V4819 210
MZ1-V4822 210
MZ1-V6015 210
MZ1-V6019 210
MZ1-V6022 210
MZ1-V7215 210
MZ1-V7219 210
MZ1-V7222 210
NG 103, 104
NTCT 7236 104
NTCT 8442 104
NTCT 9648 104
NTMT 36 103
NTMT 42 103
NTMT 48 103
RCB 94
RCB20T 94
RCB24T 94
RCB24X 95
RCB28X 95
RCB30T 94
RCB36X 95
RCB40T 94
RCBDH24X 98
RCBDH28X 98
RCBDH36X 98
RCDHB 97
RCDHB20T 97
RCDHB24T 97
RCDHB30T 97
RCDHB40T 97
RIB24T 94
pattern no. page
RIB28X 95
RIB32X 95
RIBDH24T 97
RIBDH28X 98
RIBDH32X 98
RRA12036 78
RRA12042 78
RRA12048 78
RRA14442 78
RRA14448 78
RRA16842 78
RRA16848 78
RRA19242 78
RRA19248 78
RRA3636 78
RRA4242 78
RRA4848 78
RRA6060 78
RRA7230 78
RRA7236 78
RRA7272 78
RRA8430 78
RRA8436 78
RRA8442 78
RRA9630 78
RRA9636 78
RRA9642 78
RRA9648 78
RRA(A/B/C/D/E/F/G)12036-(1/2/3) 81
RRA(A/B/C/D/E/F/G)12042-(1/2/3) 81
RRA(A/B/C/D/E/F/G)12048-(1/2/3) 81
RRA(A/B/C/D/E/F/G)14442-(1/2/3) 81
RRA(A/B/C/D/E/F/G)14448-(1/2/3) 81
RRA(A/B/C/D/E/F/G)16842-(1/2/3) 81
RRA(A/B/C/D/E/F/G)16848-(1/2/3) 81
RRA(A/B/C/D/E/F/G)19242-(1/2/3) 81
RRA(A/B/C/D/E/F/G)19248-(1/2/3) 81
RRA(A/B/C/D/E/F/G)3636-(1/2/3) 81
RRA(A/B/C/D/E/F/G)4242-(1/2/3) 81
RRA(A/B/C/D/E/F/G)4848-(1/2/3) 81
RRA(A/B/C/D/E/F/G)6060-(1/2/3) 81
RRA(A/B/C/D/E/F/G)7230-(1/2/3) 81
RRA(A/B/C/D/E/F/G)7236-(1/2/3) 81
RRA(A/B/C/D/E/F/G)7272-(1/2/3) 81
RRA(A/B/C/D/E/F/G)8430-(1/2/3) 81
RRA(A/B/C/D/E/F/G)8436-(1/2/3) 81
RRA(A/B/C/D/E/F/G)8442-(1/2/3) 81
RRA(A/B/C/D/E/F/G)9630-(1/2/3) 81
RRA(A/B/C/D/E/F/G)9636-(1/2/3) 81
RRA(A/B/C/D/E/F/G)9642-(1/2/3) 81
RRAW12036-(1/2/3) 83
RRAW12042-(1/2/3) 83
RRAW14442-(1/2/3) 83
RRAW16842-(1/2/3) 83
RRAW19242-(1/2/3) 83
RRAW3636-(1/2/3) 83
RRAW4242-(1/2/3) 83
RRAW6060-(1/2/3) 83
RRAW7230-(1/2/3) 83
RRAW7236-(1/2/3) 83
RRAW7272-(1/2/3) 83
RRAW8430-(1/2/3) 83
RRAW8436-(1/2/3) 83
RRAW8442-(1/2/3) 83
RRAW9630-(1/2/3) 83
pattern no. page
RRAW9636-(1/2/3) 83
RRAW9642-(1/2/3) 83
RSC 94
RSC4 94
RSD1427 95, 96
RSD1827 95, 96
RSD2027 95, 96
RSD2427 95, 96
RSD3027 95, 96
RSDHC 97
RSDHC3 98
RSDHC4 97
RSDHD1428 98, 99
RSDHD1828 98, 99
RSDHD2028 98, 99
RSDHD2428 98, 99
RSDHD3028 98, 99
RSDHL12 99
RSDHL15 99
RSDHL20 99
RSDHL24 99
RSDHL30 99
RSDHL36 99
RSDHL42 99
RSDHL48 99
RSDHT1 99
RSDHT2 99
RSDHT3 99
RSDHT4 99
RSDHT5 99
RSDHT6 99
RSL12 96
RSL15 96
RSL20 96
RSL24 96
RSL30 96
RSL36 96
RSL42 96
RSL48 96
RST1 96
RST2 96
RST3 96
RST4 96
RST5 96
RST6 96
RSTRLE361 91
RSTRLE362 91
RSTRLE421 91
RSTRLE422 91
RSTRSE361 93
RSTRSE362 93
RSTRSE421 93
RSTRSE422 93
RSTRWE361 92
RSTRWE362 92
RSTRWE421 92
RSTRWE422 92
RSTSLE361 91
RSTSLE362 91
RSTSLE421 91
RSTSLE422 91
RSTSSE361 93
RSTSSE362 93
RSTSSE421 93
RSTSWE361 92
pattern no. page
RSTSWE362 92
RSTSWE421 92
RSTSWE422 92
RSTTLE30481 91
RSTTLE30482 91
RSTTLE36541 91
RSTTLE36542 91
RSTTSE30481 93
RSTTSE30482 93
RSTTSE36541 93
RSTTSE36542 93
RSTTWE30481 92
RSTTWE30482 92
RSTTWE36541 92
RSTTWE36542 92
RTA12036 79
RTA12042 79
RTA12048 79
RTA14442 79
RTA14448 79
RTA16842 79
RTA16848 79
RTA19242 79
RTA19248 79
RTA3636 79
RTA4242 79
RTA4848 79
RTA6060 79
RTA7230 79
RTA7236 79
RTA7272 79
RTA8430 79
RTA8436 79
RTA8442 79
RTA9630 79
RTA9636 79
RTA9642 79
RTA9648 79
RTA(A/B/C/D/E/F/G)12036-(1/2/3) 80
RTA(A/B/C/D/E/F/G)12042-(1/2/3) 80
RTA(A/B/C/D/E/F/G)12048-(1/2/3) 80
RTA(A/B/C/D/E/F/G)14442-(1/2/3) 80
RTA(A/B/C/D/E/F/G)14448-(1/2/3) 80
RTA(A/B/C/D/E/F/G)16842-(1/2/3) 80
RTA(A/B/C/D/E/F/G)16848-(1/2/3) 80
RTA(A/B/C/D/E/F/G)19242-(1/2/3) 80
RTA(A/B/C/D/E/F/G)19248-(1/2/3) 80
RTA(A/B/C/D/E/F/G)3636-(1/2/3) 80
RTA(A/B/C/D/E/F/G)4242-(1/2/3) 80
RTA(A/B/C/D/E/F/G)4848-(1/2/3) 80
RTA(A/B/C/D/E/F/G)6060-(1/2/3) 80
RTA(A/B/C/D/E/F/G)7230-(1/2/3) 80
RTA(A/B/C/D/E/F/G)7236-(1/2/3) 80
RTA(A/B/C/D/E/F/G)7272-(1/2/3) 80
RTA(A/B/C/D/E/F/G)8430-(1/2/3) 80
RTA(A/B/C/D/E/F/G)8436-(1/2/3) 80
RTA(A/B/C/D/E/F/G)8442-(1/2/3) 80
RTA(A/B/C/D/E/F/G)9630-(1/2/3) 80
RTA(A/B/C/D/E/F/G)9636-(1/2/3) 80
RTA(A/B/C/D/E/F/G)9642-(1/2/3) 80
RTAW12036-(1/2/3) 82
RTAW12042-(1/2/3) 82
RTAW14442-(1/2/3) 82
RTAW16842-(1/2/3) 82
RTAW19242-(1/2/3) 82
Knoll Office Tables
236
pattern no. page
RTAW3636-(1/2/3) 82
RTAW4242-(1/2/3) 82
RTAW6060-(1/2/3) 82
RTAW7230-(1/2/3) 82
RTAW7236-(1/2/3) 82
RTAW7272-(1/2/3) 82
RTAW8430-(1/2/3) 82
RTAW8436-(1/2/3) 82
RTAW8442-(1/2/3) 82
RTAW9630-(1/2/3) 82
RTAW9636-(1/2/3) 82
RTAW9642-(1/2/3) 82
RTNDC361 90
RTNDC362 90
RTNDC421 90
RTNDC422 90
RTNDC481 90
RTNDC482 90
RTRDL48301 84
RTRDL48302 84
RTRDL60301 84
RTRDL60302 84
RTRDL72301 84
RTRDL72302 84
RTRDL72361 84
RTRDL72362 84
RTRDRL48301 85
RTRDRL48302 85
RTRDRL60301 85
RTRDRL60302 85
RTRDRL72301 85
RTRDRL72302 85
RTRDRL72361 85
RTRDRL72362 85
RTRDS48301 86
RTRDS48302 86
RTRDS60301 86
RTRDS60302 86
RTRDS72301 86
RTRDS72302 86
RTRDS72361 86
RTRDS72362 86
RTSDL42421 87
RTSDL42422 87
RTSDL48481 87
RTSDL48482 87
RTSDRL42421 88
RTSDRL42422 88
RTSDRL48481 88
RTSDRL48482 88
RTSDS42421 89
RTSDS42422 89
RTSDS48481 89
RTSDS48482 89
XAUA 1248G 71
XAUA 1260G 71
XAUA 1272G 71
XT1DS4505 62
XT1DS5705 62
XT1DS6905 62
XT1LS4509 62
XT1LS5709 62
XT1LS6909 62
XT1SA24 62
XT1SA30 62
pattern no. page
XT1SA36 62
XT1SA42 62
XT1SA48 62
XT1SA54 62
XT1SA60 62
XT1SA66 62
XT1SA72 62
XTB1 BAS 24D10CF 29
XTB1 BAS 24D12CF 29
XTB1 BAS 24D15CF 29
XTB1 BAS 24D15SF 29
XTB1 BAS 24D18SF 29
XTB1 BAS 24D20SF 29
XTB1 BAS 24D24SF 29
XTB1 BAS 24D25SF 29
XTB1 BAS 24S10CF 30
XTB1 BAS 24S12CF 30
XTB1 BAS 24S15CF 30
XTB1 BAS 24S15SF 30
XTB1 BAS 24S18SF 30
XTB1 BAS 24S20SF 30
XTB1 BAS 24S24SF 30
XTB1 BAS 24S25SF 30
XTB1 BAS 30D10CA 33
XTB1 BAS 30D10CF 31
XTB1 BAS 30D12CA 33
XTB1 BAS 30D12CF 31
XTB1 BAS 30D15CA 33
XTB1 BAS 30D15CF 31
XTB1 BAS 30D15SA 33
XTB1 BAS 30D15SF 31
XTB1 BAS 30D18SA 33
XTB1 BAS 30D18SF 31
XTB1 BAS 30D20SA 33
XTB1 BAS 30D20SF 31
XTB1 BAS 30D24CA 33
XTB1 BAS 30D24CF 31
XTB1 BAS 30D25CA 33
XTB1 BAS 30D25CF 31
XTB1 BAS 30S10CA 34
XTB1 BAS 30S10CF 32
XTB1 BAS 30S12CA 34
XTB1 BAS 30S12CF 32
XTB1 BAS 30S15CA 34
XTB1 BAS 30S15CF 32
XTB1 BAS 30S15SA 34
XTB1 BAS 30S15SF 32
XTB1 BAS 30S18SA 34
XTB1 BAS 30S18SF 32
XTB1 BAS 30S20SA 34
XTB1 BAS 30S20SF 32
XTB1 BAS 30S24SA 34
XTB1 BAS 30S24SF 32
XTB1 BAS 30S25SA 34
XTB1 BAS 30S25SF 32
XTB1 BAS 36D10CA 37
XTB1 BAS 36D10CF 35
XTB1 BAS 36D12CA 37
XTB1 BAS 36D12CF 35
XTB1 BAS 36D15CA 37
XTB1 BAS 36D15CF 35
XTB1 BAS 36D15SA 37
XTB1 BAS 36D15SF 35
XTB1 BAS 36D18SA 37
XTB1 BAS 36D18SF 35
pattern no. page
XTB1 BAS 36D20SA 37
XTB1 BAS 36D20SF 35
XTB1 BAS 36D24CA 37
XTB1 BAS 36D24CF 35
XTB1 BAS 36D25CA 37
XTB1 BAS 36D25CF 35
XTB1 BAS 36S10CA 38
XTB1 BAS 36S10CF 36
XTB1 BAS 36S12CA 38
XTB1 BAS 36S12CF 36
XTB1 BAS 36S15CA 38
XTB1 BAS 36S15CF 36
XTB1 BAS 36S15SA 38
XTB1 BAS 36S15SF 36
XTB1 BAS 36S18SA 38
XTB1 BAS 36S18SF 36
XTB1 BAS 36S20SA 38
XTB1 BAS 36S20SF 36
XTB1 BAS 36S24SA 38
XTB1 BAS 36S24SF 36
XTB1 BAS 36S25SA 38
XTB1 BAS 36S25SF 36
XTB1 SLIK 43
XTB1 SLIK30 43
XTB1 SLIK36 43
XTB1AC 49
XTB1AC24 49
XTB1ACEND 50
XTB1DB10C 41
XTB1DB10E 41
XTB1DB12C 41
XTB1DB12E 41
XTB1DB15C 41
XTB1DB15E 41
XTB1DB4E 41
XTB1DB5C 41
XTB1DB5E 41
XTB1DB6C 41
XTB1DB6E 41
XTB1DB8C 41
XTB1DB8E 41
XTB1EDD24 43
XTB1EDD30 43
XTB1EDD36 43
XTB1EP1DD24 47
XTB1EP1DD24P 46
XTB1EP1DD30 47
XTB1EP1DD30P 46
XTB1EP1DD36 47
XTB1EP1DD36P 46
XTB1EP1LD24 47
XTB1EP1LD24P 46
XTB1EP1LD30 47
XTB1EP1LD30P 46
XTB1EP1LD36 47
XTB1EP1LD36P 46
XTB1EP1RD24 47
XTB1EP1RD24P 46
XTB1EP1RD30 47
XTB1EP1RD30P 46
XTB1EP1RD36 47
XTB1EP1RD36P 46
XTB1EP2DD24 47
XTB1EP2DD24P 46
XTB1EP2DD30 47
pattern no. page
XTB1EP2DD30P 46
XTB1EP2DD36 47
XTB1EP2DD36P 46
XTB1EP2SD24 47
XTB1EP2SD24P 46
XTB1EP2SD30 47
XTB1EP2SD30P 46
XTB1EP2SD36 47
XTB1EP2SD36P 46
XTB1ESD24 45
XTB1ESD30 45
XTB1ESD36 45
XTB1FC 49
XTB1FC24 49
XTB1FCEND 50
XTB1LP 50
XTB1MB 49
XTB1RAK 58
XTB1SB10C 42
XTB1SB10E 42
XTB1SB12C 42
XTB1SB12E 42
XTB1SB15C 42
XTB1SB15E 42
XTB1SB4E 42
XTB1SB5C 42
XTB1SB5E 42
XTB1SB6C 42
XTB1SB6E 42
XTB1SB8C 42
XTB1SB8E 42
XTB1T24 48
XTB1TB10C 40
XTB1TB10E 40
XTB1TB12C 40
XTB1TB12E 40
XTB1TB15C 40
XTB1TB15E 40
XTB1TB4E 40
XTB1TB5C 40
XTB1TB5E 40
XTB1TB6C 40
XTB1TB6E 40
XTB1TB8C 40
XTB1TB8E 40
XTB1XD30 48
XTB1XD30N 48
XTB1XD36 48
XTB1XD36N 48
XTB1XDD24 43
XTB1XDD30 43
XTB1XDD36 43
XTB1XS30 48
XTB1XS30N 48
XTB1XS36 48
XTB1XS36N 48
XTB1YDD24 44
XTB1YDD30 44
XTB1YDD36 44
XTB2LDD 43
XTB2LDD24 43
XTB2LSD 45
XTB2LSD24 45
XTBT18 59
XTBT24 59
Knoll Office Tables
237
pattern no. page
XTBT36 59
XTBT48 59
XTBT60 59
XTC1 120 AA 39
XTC1 144 AA 39
XTC1 48 39
XTC1 60 39
XTC1 72 39
XTC1 96 39
XTC1 END 39
XTCA1 120 AA 39
XTCA1 144 AA 39
XTCA1 48 39
XTCA1 60 39
XTCA1 72 39
XTCA1 96 39
XTCF 48 39
XTCF 60 39
XTCF 72 39
XTCS1 4714 60
XTCS1 4714F 61
XTCS1 4721 60
XTCS1 4721F 61
XTCS1 4814 60
XTCS1 4814F 61
XTCS1 4821 60
XTCS1 4821F 61
XTCS1 5914 60
XTCS1 5914F 61
XTCS1 5921 60
XTCS1 5921F 61
XTCS1 6014 60
XTCS1 6014F 61
XTCS1 6021 60
XTCS1 6021F 61
XTCS1 7114 60
XTCS1 7114F 61
XTCS1 7121 60
XTCS1 7121F 61
XTCS1 7214 60
XTCS1 7214F 61
XTCS1 7221 60
XTCS1 7221F 61
XTCS1 SBA 62
XTCT6030D 58
XTCT6030LD 58
XTCT6036D 58
XTCT6036LD 58
XTCT7230D 58
XTCT7230LD 58
XTCT7236D 58
XTCT7236LD 58
XTDT42 58
XTDTX42 58
XTES1 2414 69
XTES1 2414F 70
XTES1 2421 69
XTES1 2421F 70
XTES1 3014 69
XTES1 3014F 70
XTES1 3021 69
XTES1 3021F 70
XTES1 3614 69
XTES1 3614F 70
XTES1 3621 69
pattern no. page
XTES1 3621F 70
XTES1 4814 67
XTES1 4814F 68
XTES1 4821 67
XTES1 4821F 68
XTES1 6014 67
XTES1 6014F 68
XTES1 6021 67
XTES1 6021F 68
XTES1 7214 67
XTES1 7214F 68
XTES1 7221 67
XTES1 7221F 68
XTPS1MZKIT 72
XTR1BCC50 58
XTR1D1 56
XTR1D2 56
XTR1D3 56
XTR1D4 56
XTR1DA 52, 54
XTR1DB 52, 54
XTR1DC 54
XTR1DXO 52, 54
XTR1DYO 52, 54
XTR1DZO 54
XTR1E30D 51
XTR1E30S 51
XTR1E424D 51
XTR1E424S 51
XTR1ECPM 52
XTR1EE 51, 53, 57
XTR1EJ18 52
XTR1EJ30 52
XTR1EJ42 52
XTR1EPH 52
XTR1EPI 52
XTR1FE 51, 53, 57
XTR1H30D 57
XTR1OF 52, 54, 57
XTR1PDCX 52, 54
XTR1T30D 53
XTR1T30S 53
XTR1T424D 53
XTR1T424S 53
XTR1TCC25 58
XTR1TCPM 54
XTR1TJ18 54
XTR1TJ30 54
XTR1TJ42 54
XTR1TPH 54
XTR1TPI 54
XTR1X30D 55
XTR1X30S 55
XTR1X424D 55
XTR1X424S 55
XTR1XCPM 56
XTR1XJ18 56
XTR1XJ30 56
XTR1XJ42 56
XTR1XPH 56
XTR1XPI 56
XTRS1 5414 65
XTRS1 5414F 66
XTRS1 5421 65
XTRS1 5421F 66
pattern no. page
XTRS1 6014 65
XTRS1 6014F 66
XTRS1 6021 65
XTRS1 6021F 66
XTRS1 6614 65
XTRS1 6614F 66
XTRS1 6621 65
XTRS1 6621F 66
XTRS1 7214 65
XTRS1 7214F 66
XTRS1 7221 65
XTRS1 7221F 66
XTRS1 7814 65
XTRS1 7814F 66
XTRS1 7821 65
XTRS1 7821F 66
XTSM1C 67, 68
XTSM1K 63, 64
XTSM1KC 69, 70
XTSM1KK 67, 68
XTSM1P 63, 64, 65, 66, 67, 68
XTSM1PC 69, 70
XTSM1S 63, 64, 65, 66, 67, 68
XTSM1SC 69, 70
XTSM1SLAT 67, 68
XTSS1 2414 63
XTSS1 2414F 64
XTSS1 2421 63
XTSS1 2421F 64
XTSS1 3014 63
XTSS1 3014F 64
XTSS1 3021 63
XTSS1 3021F 64
XTSS1 3614 63
XTSS1 3614F 64
XTSS1 3621 63
XTSS1 3621F 64
XTTK3018F (L/M/1/2/3) 28
XTTK3036F (L/M/1/2/3) 28
XTTK3618F (L/M/1/2/3) 28
XTTK3636F (L/M/1/2/3) 28
XTTK4218F (L/M/1/2/3) 28
XTTK4236F (L/M/1/2/3) 28
XTTK4824A (L/M/1/2/3) 22
XTTK4824C (L/M/1/2/3) 24
XTTK4824E (L/M/1/2/3) 25
XTTK4824U (L/M/1/2/3) 23
XTTK4830A (L/M/1/2/3) 22
XTTK4830C (L/M/1/2/3) 24
XTTK4830E (L/M/1/2/3) 25
XTTK4830U (L/M/1/2/3) 23
XTTK4836A (L/M/1/2/3) 22
XTTK4836C (L/M/1/2/3) 24
XTTK4836D (L/M/1/2/3) 26
XTTK4836E (L/M/1/2/3) 26
XTTK4836U (L/M/1/2/3) 23
XTTK6018F (L/M/1/2/3) 28
XTTK6024A (L/M/1/2/3) 22
XTTK6024C (L/M/1/2/3) 24
XTTK6024E (L/M/1/2/3) 25
XTTK6024U (L/M/1/2/3) 23
XTTK6030A (L/M/1/2/3) 22
XTTK6030C (L/M/1/2/3) 24
XTTK6030E (L/M/1/2/3) 25
XTTK6030U (L/M/1/2/3) 23
pattern no. page
XTTK6036A (L/M/1/2/3) 22
XTTK6036C (L/M/1/2/3) 24
XTTK6036D (L/M/1/2/3) 26
XTTK6036E (L/M/1/2/3) 26
XTTK6036F (L/M/1/2/3) 28
XTTK6036U (L/M/1/2/3) 23
XTTK7218F (L/M/1/2/3) 28
XTTK7224A (L/M/1/2/3) 22
XTTK7224C (L/M/1/2/3) 24
XTTK7224E (L/M/1/2/3) 25
XTTK7224U (L/M/1/2/3) 23
XTTK7230A (L/M/1/2/3) 22
XTTK7230C (L/M/1/2/3) 24
XTTK7230E (L/M/1/2/3) 25
XTTK7230U (L/M/1/2/3) 23
XTTK7236A (L/M/1/2/3) 22
XTTK7236C (L/M/1/2/3) 24
XTTK7236D (L/M/1/2/3) 26
XTTK7236E (L/M/1/2/3) 26
XTTK7236F (L/M/1/2/3) 28
XTTK7236U (L/M/1/2/3) 23
XTTK8418F (L/M/1/2/3) 28
XTTK8436F (L/M/1/2/3) 28
XTTK9624A (L/M/1/2/3) 22
XTTK9624C (L/M/1/2/3) 24
XTTK9624U (L/M/1/2/3) 23
XTTK9630A (L/M/1/2/3) 22
XTTK9630C (L/M/1/2/3) 24
XTTK9630U (L/M/1/2/3) 23
XTTK9636A (L/M/1/2/3) 22
XTTK9636C (L/M/1/2/3) 24
XTTK9636U (L/M/1/2/3) 23
XTTP3018F (L) 28
XTTP3618F (L) 28
XTTP4218F (L) 28
XTTP4824A (L) 22
XTTP4824B (L) 23
XTTP4824C (L) 24
XTTP4824E (L) 25
XTTP4830A (L) 22
XTTP4830B (L) 23
XTTP4830C (L) 24
XTTP4830E (L) 25
XTTP4836A (L) 22
XTTP4836B (L) 23
XTTP4836C (L) 24
XTTP4836D (L) 27
XTTP4836E (L) 27
XTTP6024A (L) 22
XTTP6024B (L) 23
XTTP6024C (L) 24
XTTP6024E (L) 25
XTTP6030A (L) 22
XTTP6030B (L) 23
XTTP6030C (L) 24
XTTP6030E (L) 25
XTTP6036A (L) 22
XTTP6036B (L) 23
XTTP6036C (L) 24
XTTP6036D (L) 27
XTTP6036E (L) 27
XTTP7224A (L) 22
XTTP7224B (L) 23
XTTP7224C (L) 24
XTTP7224E (L) 25
Knoll Office Tables
238
pattern no. page
XTTP7230A (L) 22
XTTP7230B (L) 23
XTTP7230C (L) 24
XTTP7230E (L) 25
XTTP7236A (L) 22
XTTP7236B (L) 23
XTTP7236C (L) 24
XTTP7236D (L) 27
XTTP7236E (L) 27
XTTP9624A (L) 22
XTTP9624B (L) 23
XTTP9624C (L) 24
XTTP9630A (L) 22
XTTP9630B (L) 23
XTTP9630C (L) 24
XTTP9636A (L) 22
XTTP9636B (L) 23
XTTP9636C (L) 24
XTTS3018F (1/2/3) 28
XTTS3618F (1/2/3) 28
XTTS4218F (1/2/3) 28
XTTS4824A (1/2/3) 22
XTTS4824C (1/2/3) 24
XTTS4824E (1/2/3) 25
XTTS4824U (1/2/3) 23
XTTS4830A (1/2/3) 22
XTTS4830C (1/2/3) 24
XTTS4830E (1/2/3) 25
XTTS4830U (1/2/3) 23
XTTS4836A (1/2/3) 22
XTTS4836C (1/2/3) 24
XTTS4836D (1/2/3) 26
XTTS4836E (1/2/3) 26
XTTS4836U (1/2/3) 23
XTTS6024A (1/2/3) 22
XTTS6024C (1/2/3) 24
XTTS6024E (1/2/3) 25
XTTS6024U (1/2/3) 23
XTTS6030A (1/2/3) 22
XTTS6030C (1/2/3) 24
XTTS6030E (1/2/3) 25
XTTS6030U (1/2/3) 23
XTTS6036A (1/2/3) 22
XTTS6036C (1/2/3) 24
XTTS6036D (1/2/3) 26
XTTS6036E (1/2/3) 26
XTTS6036U (1/2/3) 23
XTTS7224A (1/2/3) 22
XTTS7224C (1/2/3) 24
XTTS7224E (1/2/3) 25
XTTS7224U (1/2/3) 23
XTTS7230A (1/2/3) 22
XTTS7230C (1/2/3) 24
XTTS7230E (1/2/3) 25
XTTS7230U (1/2/3) 23
XTTS7236A (1/2/3) 22
XTTS7236C (1/2/3) 24
XTTS7236D (1/2/3) 26
XTTS7236E (1/2/3) 26
XTTS7236U (1/2/3) 23
XTTS9624A (1/2/3) 22
XTTS9624C (1/2/3) 24
XTTS9624U (1/2/3) 23
XTTS9630A (1/2/3) 22
XTTS9630C (1/2/3) 24
pattern no. page
XTTS9630U (1/2/3) 23
XTTS9636A (1/2/3) 22
XTTS9636C (1/2/3) 24
XTTS9636U (1/2/3) 23
XTWB120 59
XTWTB 59
XTWTBSLIK 59
XTWTC 59
XTWTX 59
YKPTS3030D 8
YKPTS3030L 8
YKPTS3030M 8
YKPTS3636D 8
YKPTS4242D 8
YKPTS4824D 8
YKPTS4848D 8
YKPTS5427D 8
YKPTS6030D 8
YKPTS7236D 8
YKPTS8442D 8
YKTR42D 7
YKTR42L 7
YKTR42M 7
YKTR48D 7
YKTS3030D 7
YKTS3030L 7
YKTS3030M 7
YKTS3636D 7
YKTS4242D 7
YKTS4824D 7
YKTS4848D 7
YKTS5427D 7
YKTS6030D 7
YKTS7236D 7
YKTS8442D 7
YKTT7236D 7
YKTT8442D 7
YKTT9648D 7
Knoll Office Tables
239
This Selling Policy supercedes all previous selling policies. Prices, discounts and product offerings are subject to change without notice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Terms & Conditions
of SalesSales by Knoll, Inc. or Knoll North America Corp. (‘‘Seller’’) of Knoll Product Lines (hereinafter ‘‘Products’’) within the United States and Canada aremade only on the terms which are contained in this Selling Policy. Seller hereby gives notice of its objection to any different or additional terms andconditions. This sale is expressly conditional upon Purchaser’s assent to the terms and conditions set forth below. Additional terms and conditions mayapply to KnollStudio and KnollTextiles orders. These terms and conditions may be modified or supplemented only by a written document signed by anauthorized representative of Seller. These terms and conditions supercede any prior and/or contemporaneous agreements or correspondence betweenPurchaser and Seller. Written quotations expire thirty (30) days from the date of issuance and can be withdrawn by written notice anytime during thatperiod. Where Purchaser and Seller have entered into the Knoll Electronic Terms and Conditions, all orders, acknowledgements, invoices and otherbusiness communications placed or transmitted in accordance with the Knoll Electronic Terms and Conditions shall be deemed to be in writing and signedand shall be valid for all purposes as if they were originated and maintained in documentary form.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ordering Information All orders must be in writing. The product pattern number(s) contained on Seller’s order acknowledgement shall be the final expression of the order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Order Confirmation A purchase order is not binding on Seller until Purchaser has received Seller’s order confirmation or acknowledgment.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pricing Policies List prices are subject to change without notice.List prices shall be those prices in effect on the date of receipt of a complete purchase order unless shipment is requested more than ninety (90) days afterorder entry in which case prices in effect on the date of shipment apply. List prices include specified freight costs. Unless specified in writing by Seller, noother charges are included in Seller’s list prices.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Taxes All sales, use, excise and other taxes applicable to the sale of the Products shall be paid by Purchaser. If Purchaser claims an exemption from any tax,Purchaser shall submit to Seller the appropriate exemption certificates.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Terms of Payment Payment for one hundred percent (100%) of the net order amount is due within thirty (30) days of the date of invoice, which is issued upon shipment. Incase of any discrepancies, such as shortages, and Seller is notified in writing within ten (10) days of receipt of Product, only that portion may be deductedand the balance paid. For orders greater than $100,000 net, a fifty percent (50%) deposit is due at the time of order placement, with the remainder duewithin thirty (30) days of the date of invoice.KnollStudio orders less than $2,000 require payment for one hundred percent (100%) of the net order amount (including any applicable sales tax andcharges for inside delivery, special packaging, etc.), due at time of order placement. For KnollStudio orders greater than $2,000, a one-half (50%) depositis due at time of order placement with the remainder (including any applicable sales tax and charges for inside delivery, special packaging, etc.) due priorto shipment.If, in the judgment of Seller, Purchaser’s financial condition does not justify the terms of the payment, Seller may require full or partial payment inadvance.Past due accounts shall be charged one and one-half percent (1.5%) per month, or the highest rate permitted by law, whichever is less, and will be addedto the outstanding balance. In the event Purchaser defaults on payment, Purchaser shall be liable for all collection costs, including reasonable attorney’sfees and costs.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changes andCancellation
Purchase orders may not be changed or cancelled, in whole or in part, without prior written consent of Seller. Changes may effect delivery dates. Expensesincurred because of changes shall be charged to Purchaser. In the event of cancellations, Purchaser will be liable for reasonable cancellation chargesestablished by Seller. Orders for special Product, orders including ‘‘COM’’ (hereinafter defined) material and orders pursuant to expedited deliveryprograms, may not be canceled.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Freight Prepaid Freight is prepaid and included in the price of all Products, except KnollTextiles, within the 48 contiguous United States for orders placed with Knoll, Inc.and within Canada, excluding the Yukon, Northwest Territories, Nunavut and Newfoundland for orders placed with Knoll North America Corp. Packing istested for rigorous motion and transportation but is not guaranteed to protect furniture from conditions over which the Seller has no control. If specialpackaging is required for any reason, please consult with your sales representative or dealer. Seller shall select the method of shipment and routing. Allshipments shall be tailgate deliveries. Freight for all KnollTextiles orders is prepaid and added to the invoice.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Delivery/Freight Charges Shipments outside the contiguous 48 United States and Canada shall be shipped F.O.B. Origin.For shipments outside the contiguous United States and Canada, Purchaser is responsible for the cost of freight from point of embarkation, including anyhandling and transportation charges incidental to loading at the point of departure and unloading at the final destination.Conditions beyond the control of Seller, including weather, available facilities and traffic conditions, may affect exact time of delivery. Seller shall not beresponsible for specific carrier delivery date or time unless it has made a specific delivery commitment, in writing.Nonstandard methods of shipment and/or additional services are available upon request. Purchaser will be billed for the differential cost of any specialservices in excess of standard surface carrier freight costs. Premium charges, at Purchaser’s request, will be added for airfreight, exclusive use of vehicleand extra, export or special packaging. Accessorial charges will be added for inside delivery, extra labor, reconsignment and redelivery.Partial shipments may be made and invoiced by Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Claims All shipments for all Knoll Products within the contiguous United States and Canada are F.O.B. Origin. Risk of loss passes to Purchaser at time of deliveryto carrier. Purchaser shall inspect all Products upon receipt and notify Seller within ten (10) working days after receipt of any damage or defects which are,or should be, apparent from an inspection of the Product and its packaging. Failure of Purchaser to make a claim against carrier or notify Seller during theten (10) working day period shall constitute acceptance of the Products and waiver of any apparent defects, errors or shortages. Seller will agree to repairor replace Product damaged in shipment if Purchaser has notified Seller of freight damage within ten (10) working days after receipt and assigns its rightsagainst the carrier.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Seller’s Security Interest Until Seller receives the full payment for the Product, Seller shall have a security interest in the Product. Purchaser agrees to perform all acts, includingbut not limited to the execution and filing of documentation, which may be necessary to perfect and assure the security interest of Seller.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Returns The return of Products without a written authorization by Seller shall not be accepted. To receive authorization for Product return, please call CustomerService. All Products that are returned pursuant to a valid authorization shall be subject to a twenty-five percent (25%) of list restocking charge. Productsnot currently offered for sale by Seller (including COM) shall not be authorized for return. All returned Products must be unused, in original condition andin the original Seller packing cartons. No refund or credit shall be given for damaged Products.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Held Orders/Storage If Purchaser requests that an order be held or delayed, prices and terms and conditions in effect at the time of shipment shall apply. If Purchaser requestsa delay after the time when Seller can defer production, Purchaser will be invoiced for the Product, payable in accordance with standard terms, when theorder is ready for shipment. Seller may transfer the Product to storage, in which case all expenses incurred in connection with storage, includingdemurrage, preparation for storage, storage charges and handling shall be payable by Purchaser upon submission of invoices by Seller. Risk of loss to theProduct shall pass to the Purchaser upon delivery of the Product into storage.
Selling Policy
240January 1, 2011
Customer’s Own Material A Purchaser who requests a fabric or other surface material not standard to Seller’s line of Products (‘‘COM’’) must submit samples of the requestedmaterial to Seller prior to entry of a purchaser order. Seller shall determine if the material is suitable to its manufacturing processes and meets anyrequirements of Underwriters Laboratories. If the COM is acceptable, Seller will then establish a price for using the COM or the Product in question. For adescription of the procedures for submitting samples and testing, contact customer resources or your sales representative. Seller shall have noresponsibility for the appearance, condition, performance, durability, colorfastness or any other physical attribute of the COM. Purchaser shall indemnifyand hold Seller harmless for any damages, injuries or losses arising out of or related to use of the COM on the Product.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty Seller warrants to the original Purchaser only that the Products Seller manufactures and sells to Purchaser are free of defects in workmanship andmaterials, during the applicable warranty period set forth below.Warranty period set forth below is for 24-hour, 7 days a week, multi shift use (includes parts and labor to repair).Should any failure to conform with this limited warranty appear to a Product listed below during the applicable warranty period from the date of shipment,Seller shall, upon prompt written notice, repair or replace, at its option and costs, the affected part or parts.Product and Period of WarrantyLifetime: Antenna Workspaces, AutoStrada, Calibre, Crinion Open Table, Currents, Dividends Horizon, Equity, Morrison, Reff Profiles laminate, Series 2Storage, Template, Antenna Workspaces and other non-wood components (except cascade edge worksurfaces, operational parts, controls, electrical,Lighting, Series 2 Veneer Front Storage, special or custom products, see below)12 Years: Chadwick, Essentials Work Chairs, Generation by Knoll, Life, Moment, MultiGeneration by Knoll, RPM and Sapper seating (except seatingupholstery, textiles, leathers and finishes, see below).10 Years: Antenna Workspaces, AutoStrada, Crinion Open Table, Reff Profiles wood components, Series 2 Veneer Front Storage, cascade edge worksurfaces,Wood Casegoods (Magnusson, The Graham Collection) (except wood casegoods upholstered surfaces, see below), Interaction tables (except heightadjustment mechanisms for Counterforce, crank-adjustable, and split-top tables and worksurfaces, see below), Reuter overheads, Reuter vertical storage,KnollExtra Sapper Monitor Arm Collection, Adjustable keyboard mechanisms and platforms, Communication Boards (except fabric board textiles, seebelow), Smokador collection (except leathers, see below), and Orchestra Universal Systems Accessories.5 Years: Operational parts, controls, electrical, Lighting (except light ballasts, bulbs and power supply, see below), special or custom product, wood veneerproducts, Currents handcrank, Interaction Counterforce, Interaction crank-adjustable, and split-top mechanisms, KnollStudio, CPU storage and alluniversal storage drawers.3 Years: Seating upholstery, textiles, leathers and finishes. Fabric boards textiles and Smokador Collection leathers.2 Years: All other KnollExtra product1 Year: Light ballasts, bulbs and power supply, seating upholstered armpads and soft armpads, wood casegoods upholstered surfaces.This warranty does not apply to:• Damage caused by a carrier other than the Seller.• Normal wear and tear or acts or omissions of parties other than Seller (including user modification, improper use or installation of Products).• COM or other third party materials applied to Products.• Products not installed by or under the auspices of a Knoll Dealer.• Dramatic temperature variations or exposure to unusual conditions.• Changes in surface finishes, including colorfastness due to aging or exposure to light.• Except as specifically noted above, textiles and upholstery supplied by KnollTextiles (consult current KnollTextiles price list for applicable warranty).Natural variations occurring in wood, marble, and leather shall not be considered defects, and the Seller does not guarantee the colorfastness or matchingof the colors, grains or textures, or surface hardness of such materials. The Seller also does not guarantee the colorfastness of fiberglass panel surfaces.THE EXPRESS WARRANTIES CONTAINED HEREIN ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANYWARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR PURPOSE AND ALL OTHER WARRANTIES ARISING FROMCOURSE OF DEALING OR USAGE OF TRADE.The remedies provided above are the Purchaser’s sole remedies for any failure of Seller to comply with its obligations regarding the workmanship of itsProducts. Correction of any nonconformity in the manner and for the period of time provided shall constitute complete fulfillment of all liabilities of Seller,with respect to or arising out of the Product furnished hereunder.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Delay/Force Majeure Seller shall not be liable for failure to perform or for delay in performance due to fire, flood, strike or other labor difficulty, act of God, act of anygovernmental authority or of the Purchaser, riot, embargo, fuel or energy shortage, wrecks or delay in transportation, inability to obtain necessary labor,materials or manufacturing facilities from usual sources or failure of suppliers to meet their contractual obligations, or due to any cause beyond itsreasonable control. If any such event occurs, Seller may extend delivery dates by a period of time necessary to overcome the effect of such delay, allocateavailable Product or cancel any purchase order.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Compliance with Law PURCHASER IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL APPLICABLE FEDERAL, STATE AND LOCAL LAWS, ORDINANCES,REGULATIONS, RULES AND STANDARDS RELATING TO THE INSTALLATION, MAINTENANCE, USE AND OPERATION OF THE PRODUCTS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Patents Subject to the following provisions, Seller shall, at its own expense, defend or, at its option, settle any claim, suit or proceeding brought against thePurchaser, and/or its vendees, mediate and immediate, so far as based on an allegation that any Product or any part thereof furnished hereunderconstitutes a direct or a contributory infringement of any claim of any patent of the United States or Canada. This obligation shall be effective only ifPurchaser shall have made all payments then due hereunder and if Seller is notified promptly in writing and given authority, information and assistancefor the defense of said claim, suit or proceeding. Seller shall pay all damages and costs awarded in such suit or proceedings so defended.The foregoing indemnity does not apply to the following:• Products supplied according to a design other than that of Seller, and which is required by the Purchaser.• Combination of the Product with another product not furnished hereunder unless Seller is a contributory infringer.• Any settlements of a suit or proceeding made without Seller’s written consent.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Limitations of Liability SELLER, ITS CONTRACTORS, AUTHORIZED DEALERS AND SUBCONTRACTORS OR SUPPLIERS OF ANY TIER SHALL NOT BELIABLE TO PURCHASER FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM ABREACH OF THIS AGREEMENT.Purchaser’s remedies set forth herein are exclusive and the liability of Seller with respect to the breach of this agreement or any contract entered intobetween the parties pursuant hereto shall not exceed the price of the Product or part on which such liability is based.
Selling Policy
241January 1, 2011
KnollKey Lock Program
KnollKeyLock ProgramGeneral InformationFollowing is the KnollKey lock policy, applicable to all products.
Key-alikeFor the convenience of the user, furniture may be keyed alike at nocharge. Write ‘‘Key-alike’’ in the description of your purchase order forany pedestal, overhead, file or other item you wish to have keyed alike.
Using the key-alike instructions, order cores and keys as line items onyour purchase order. Do NOT submit a key-alike form. The Knoll EastGreenville Lock Center will select key numbers from the standard range ofK 001 - K 250. Key numbers will not be repeated unless over 250 sets areordered. Lock cores keyed-alike will ship separately from the product,ready for field installation.
There is no charge for key-alike orders if placed with the furniture order.
IF THE KEY-ALIKE ORDER IS NOT PLACED AT LEAST TWO WEEKSPRIOR TO THE FURNITURE SHIP DATE, A $50 HANDLING CHARGEAND AIR FREIGHT CHARGES WILL APPLY.
If product is ordered and shipped random-keyed, additional lock coresfor key-alike are billable.
Random-KeyingTo specify product keyed-random, write ‘‘key-random’’ in the productdescription. Random-keyed product is shipped with the lock core factoryinstalled. A shrouded key is included. Random means no effort has beenmade to match key numbers, or to make them different.
KeysA Knoll shrouded key is shipped with every lock core. 250 Key numbersare available. For numbers above 250, contact Custom ProductDevelopment. Additional keys and key blanks are available. See serviceparts for more information.
Master KeyingKnoll locks can be controlled by means of a master key. There is noadditional per-lock charge for master keying. A letter of approval from theclient must accompany orders for master keys.
Installing Lock CoresLock cores can be installed or removed in the field by using a change key.Cores must be in the unlocked position to be removed. See service partsfor change key pattern number and pricing.
Lock DistributionAll orders for key-alike lock cores/keys are packaged and shipped fromthe East Greenville Lock Center, regardless of where the pedestals,overhead, or other units are produced. Random keyed product will havecores factory-installed.
How to SpecifyKey-AlikeFollowing is an example of how to specify key-alike for a cluster of 10workstations.
Step 1 - Using the project floorplan, count the number of locks in eachworkstation.
Step 2 - Count the number of workstations with the same quantity oflocks. Group together the workstations with a like number of locks.
5 workstations with 2 locks per station3 workstations with 4 locks per station2 workstations with 5 locks per station
Step 3 - For the first group (5 sets of 2 locks), enter the number ofworkstations in the quantity column.
Qty Pattern # Description Unit List Ext. List
5
Step 4 - Then enter the pattern number ‘‘KSPEC_ _’’ and add a suffix forthe number of locks for that group (i.e., for 2 locks per station, add thesuffix ‘‘2’’). Up to 30 lock cores are available in a set (i.e., KSPEC 30).
Qty Pattern # Description Unit List Ext. List
5 KSPEC 2 Set of 2 cores/keys N / C N / C
Step 5 - Repeat for other groups.
Qty Pattern # Description Unit List Ext. List
5 KSPEC 2 Set of 2 cores/keys N / C N / C
3 KSPEC 4 Set of 4 cores/keys N / C N / C
2 KSPEC 5 Set of 5 cores/keys N / C N / C
Your Key instructions are complete.
Knoll will select key numbers for each set from 250 available numbers.Additional key numbers are available through Custom ProductDevelopment. For additions to existing installations, specify desiredkey numbers in the description.
Service PartsPattern # Description List Price
KKEY_ _ _ Shrouded KeySpecify key number desired
$5
KBLANK Shrouded Key Blank $5
KSPECB_ _ _ Retrofit Universal Core/KeySpecify key number desired
$18
KCHANGE Change Key $5
KMASTER* Master Key $5
*Note: A letter of approval on company letterhead from the client mustaccompany all orders for master keys.
242
General Ordering Information
The ProductsThis guide encompasses all standard products for this product group.
SizesDimensions listed in this guide are indicated as:H = heightW = widthD = depthDia. = diameterRad. = radius
PricingAll prices shown are list.
How to OrderSelect pattern numbers and quantities required for your complete installation. Product questions can beaddressed in the specific sections of this guide or by contacting your sales representative or customerresource representative at 1-800-343-5665.
Next, select options (if required), along with colors and finishes appropriate to each product. Reference theFinishes and Fabrics pages for color designations.
On large installations, an item’s ‘‘designated area’’ can be specified to assist in product organization andhandling.
To expedite complete / correct entry of your order, be certain all pattern numbers, quantities, colors andarea identifications are completely specified. Also, include complete purchase order numbers, bill-to andship-to addresses, a contact name and specific factory shipping dates required.
Mail all orders to:Knoll, Inc.1235 Water StreetP.O. Box 157East Greenville, PA 18041Attention: Order Entry
Once your order is entered at Knoll, an acknowledgment will be mailed to you. You will be advised of yourscheduled shipping date within five days of the original acknowledgment. If it is necessary to revise yourorder, please contact your customer resource representative.
Sustainability Statement
Sustainable design is a key component of Knoll’s environmental focus. Our commitment to socialresponsibility and a healthy environment has prompted us to further articulate our longstandingenvironmental programs and, with encouragement and support from our colleagues in the industry, we havere-energized our focus on such ‘‘green’’ initiatives as life cycle analysis and LEED™ certification. Knoll isproud to have contributed to projects that have received LEED certification from the U.S. Green BuildingCouncil.
For the latest information on Knoll products that help our customers achieve LEED certification, log on toknoll.com, click on ‘‘About Knoll’’ and then ‘‘Environmental Focus.’’
243