modelling and measuring maps of nerve connections part b david willshaw institute for adaptive &...
TRANSCRIPT
Modelling and measuring maps of nerve connections
PART B
David WillshawInstitute for Adaptive & Neural Computation
School of InformaticsUniversity of Edinburgh
4
Intrinsic imaging
Measurement of local haemodynamic activity in response to a stimulus, as an indicator of local neural activity
Intrinsic optical imaging measures change in local light reflectance following local neural activation
Poor signal to noise – so averaging is done over many episodes of presentation
6
Fourier-based intrinsic imagingKalatsky & Stryker (2003)Neuron, 38, 529-545
Mouse: stimuli are slowly moving bars in moving backwards and forwards in one of two directions.
In the images recorded, the position of the bar is colour coded
7
Fourier-based intrinsic imaging
The local haemodynamic activity generated from a stimulus scanned repeatedly over the visual field is measured continuously
The component of the local response at the stimulus frequency is analysed
For each pixel in the image, the phase at which this component is maximal indicates the corresponding visual field position
8
Kalatsky & Stryker: Recordings from cat/mouse visual cortex
A. Cat: raw signal from a single pixel of an image from visual cortex
B. Cat:
Power spectrum of A.
C. Mouse: Power spectrum
9
Kalatsky & Stryker (2003) A,B: maps recorded from mouse visual cortex
C,D: low resolution map constructed by drawing in 10 degree contours;E,F: comparison with classic data
Problem of response delay resolved by averaging the responses
in the two directions
I now have to convert these coloured maps into point-to-point mappings to enable my
measurement method to be used
10
11
Cang, J. et al. J. Neurosci. 2008;28:11015-11023
Functional retinotopic maps in the mouse superior colliculus
13
Wild type, 20 pointsFor each collicular point, find the average field position for the active pixels within a Gaussian distribution of a given halfwidth; this sampling radius is half the mean spacing between adjacent nodes (~180 m)
0 crossingsMean, stddev of length ratios: 1, 0.15
14
By taking the sampling radius as half the spacing of adjacent nodes, effectively the colliculus is being parcellated into 20 distinct areas and the quality of the 20 point map is being measured
0 crossingsMean, stddev of length ratios: 1, 0.15
15
As the precision of the measurement is increased by using more sampling points, at some point the map will become disordered.
Hence the ultimate precision of the map can be measured
19
Beta2 knockout, 20 point map sampling radius at half the node spacing (~ 120 m)0 crossingsMean, stddev of length ratios: 1, 0.40
25
The sampling radius determines the precision of the map calculated
It was set at half the mean distance between collicular nearest-neighbours
Alternatively: specify a constant radius (interpretable as a certain degree of variability in the measurement
process?) and find out how many points are topographically distinguishable
Wild type – crossings as a function of the number of nodes.
Averaged over 8 different starting configurations
26
Beta2 knockout – crossings as a function of the number of nodes
Average over 8 different starting configurations
28
30
The number of points arranged in order depends on the total area of colliculus sampled; it is better to express the precision in terms of the minimum distance between neighbouring sampling points
Wildtype: Area: ~0.515 mm2
~40m between points.
Beta2: Area: ~0.215 mm2
~70m between points
31
My method of quantifying map order can be applied to these large data sets
Normal maps seem to have quite high precision
I’m able to use the method to compare quantitatively normals with wild type maps
Now to look at other abnormal maps!
In conclusion of Part 2:
33
METHOD 1: Goodhill & Sejnowski Neural Computation, 8, 1251-1303 (1997)
1-1 mapping of one set of points embedded in a multidimensional space onto a second set is given
For each of the two spaces, similarity functions S, S’ are defined over all pairs of points in a space
A cost function is defined as the sum over all pairs of matching points of the product of the two similarities for each pair of points
C = S(I, J)*S’(I’,J’)
Their focus was on the type of mappings that minimise this cost function for regular lattices
34
METHOD 2: Procrustes method
This is for comparison of two sets, A and B, of points (‘landmarks’) from a geometric space.
The method involves rotating, translating and rescaling one set, B, to find the best fit, B’, to the points in A.
The measure of best fit is the mean square deviation of the points in A from its corresponding point in B’.
From this can be derived both the best orientation of the map and a measure of the best fit.
35
Comparison of Methods
Goodhill & Sejnowski method is devoted to internal order only, for special cases
Procrustes treats the map as a whole and gives measure of precision assuming an overall orientation of the whole map
The method presented here distinguishes the measure of internal order from that for global order (map orientation)
36
Conclusions of Part 2
In order to be able to distinguish the contributions of different mechanisms to the formation of ordered maps, a reliable method for quantification of maps is needed.
This is the first step towards a quantitative examination of the role of neural activity and molecular cues in setting up ordered retinotopic maps.
39
1. Olfactory receptor cell axons in sensory epithelium project to the glomeruli, then to the mitral cells in the olfactory bulb and then to the cerebral cortex
43
2. Each of the 10^6 (?) sensory neurons expresses just one of the ~1000 different odorant receptor (OR) genes (?). 3.Neurons expressing the same OR are widely distributed in the olfactory epithelium yet converge to typically 2 out of 1800 glomerular positions in the optic bulb.
44
Differential labelling of the M71 and the M72 genes (ie, genes that encode the M71, M72 receptors) demonstrate this specificity
45
4. Is the position of the projection pattern determined by the target or the receptors?
replacing the gene coding sequence of one OR by that of another causes the glomerular position of the resulting OR axons to shift.
The shift is often to a position between the normal positions of the two ORs
48
5. Neurons expressing a given OR exhibit similar levels of ephrinA in their target glomerulus (Cutforth et al, 2004).
Those expressing different ORs express different levels of ephrin-A protein on their axons; there is a 5 fold range of variation over the glomeruli.Over- or under-expression of ephrinA alters the sensory map.
49
Under-expression: Positioning of the glomeruli in
WTs and EphrinA3/A5-/- mutants[Cutforth et al, Cell, 114, 3110312, 2003]
50
What does this all mean? My adaptation of the contextual model for axonal sorting (Feinstein & Mombaerts, 2004):
1. Odorant receptors play an instructive role in the formation of the receptor-specific glomeruli.
1. Initially axons innervate the glomerular area at random.
1. By adjusting their positions through mutual repulsion between axons with different ephrin levels , receptor-specific glomeruli are formed
51
Questions that need answers:
Basic numbers involved? Eg, number of receptors, amount of convergence?Remember that there is continual turnover in olfactory receptorsHow reproducible are the glomeruli patterns from animal to animal? They don’t seem to be entirely random.What information is there about the initial trajectory of axons?What are the current computational models?Or maybe look at Drosophila (see Luo & Flanagan review)?