model uwba-102 ultra - wide - band 11 db, 5 ghz amplifier

2
Model UWBA-102 Specs.doc (kh6htv, 11/25/2019) p. 1 of 2 Model UWBA-102 ULTRA - WIDE - BAND 11 dB, 5 GHz AMPLIFIER The KH6HTV VIDEO Model UWBA-102 is an U ltra-W ide-B and A mplifier with a flat frequency response extending from the low audio kHz range up to microwaves (GHz). It is intended for use as an instrumentation amplifier with instruments such as spectrum analyzers and oscilloscopes, but also can be used for amateur radio and commercial telecommunications applications. This amplifer features 11 dB gain, +14 dBm output, -3 dB BW of 5 GHz and useable gain to beyond 10 GHz. The -3 dB low frequency cutoff is a very low, 1.2 kHz. However, if the buyer requires a higher cutoff frequency, it can be supplied at no extra cost, upon request. The amplifier is available for sale, either as an assembled pc board - or - in an all metal enclosure. Typical Key Performance Parameters Frequency 430 MHz 1.25 GHz 2.4 GHz 3.5 GHz 5.8 GHz 10 GHz S21 Gain 11 dB 11 dB 11 dB 10 dB 7 dB 6 dB Pout(-1dB) +14 dBm +13 dBm +12.5dBm +13.5dBm +13 dBm +11 dBm Parameter Parameter Bandwidth (-3 dB) 5 GHz Low Freq. (-3 dB) 1.2 kHz S11 see plot S22 see plot S21 see plot Noise Figure 5 to 6 dB DC supply Voltage 12V, 11-15 V range DC current 60 mA RF connectors SMA DC connector solder feed-thru cap Dimensions (pc) 2.2" x 0.9" Dimesions (box) 1.5"x3.6"x1.25" KH6HTV-VIDEO www.kh6htv.com e-mail: [email protected] Boulder, Colorado, USA

Upload: others

Post on 28-Feb-2022

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Model UWBA-102 ULTRA - WIDE - BAND 11 dB, 5 GHz AMPLIFIER

Model UWBA-102 Specs.doc (kh6htv, 11/25/2019) p. 1 of 2

Model UWBA-102ULTRA - WIDE - BAND

11 dB, 5 GHzAMPLIFIER

The KH6HTV VIDEO Model UWBA-102 is an Ultra-Wide-Band Amplifierwith a flat frequency response extending from the low audio kHz range upto microwaves (GHz). It is intended for use as an instrumentationamplifier with instruments such as spectrum analyzers and oscilloscopes,but also can be used for amateur radio and commercialtelecommunications applications. This amplifer features 11 dB gain, +14dBm output, -3 dB BW of 5 GHz and useable gain to beyond 10 GHz. The-3 dB low frequency cutoff is a very low, 1.2 kHz. However, if the buyerrequires a higher cutoff frequency, it can be supplied at no extra cost,upon request. The amplifier is available for sale, either as an assembledpc board - or - in an all metal enclosure.

Typical Key Performance ParametersFrequency 430 MHz 1.25 GHz 2.4 GHz 3.5 GHz 5.8 GHz 10 GHzS21 Gain 11 dB 11 dB 11 dB 10 dB 7 dB 6 dB

Pout(-1dB) +14 dBm +13 dBm +12.5dBm +13.5dBm +13 dBm +11 dBm

Parameter ParameterBandwidth (-3 dB) 5 GHz Low Freq. (-3 dB) 1.2 kHz

S11 see plot S22 see plotS21 see plot Noise Figure 5 to 6 dB

DC supply Voltage 12V, 11-15 V range DC current 60 mARF connectors SMA DC connector solder feed-thru cap

Dimensions (pc) 2.2" x 0.9" Dimesions (box) 1.5"x3.6"x1.25"

KH6HTV-VIDEO www.kh6htv.com e-mail: [email protected] Boulder, Colorado, USA

Page 2: Model UWBA-102 ULTRA - WIDE - BAND 11 dB, 5 GHz AMPLIFIER

Model UWBA-102 Specs.doc (kh6htv, 11/25/2019) p. 2 of 2

UWBA-102 AMPLIFIER -- S PARAMETERS

S21 Gain vs. Frequency 10 MHz to 10 GHz, 1 GHz/div. Vertical scale is 2 dB/div.Dashed line at bottom is 0 dB. Useful Gain up to beyond 10 GHz

S11 Input (left) & S22 Output (right) Return Loss vs. Frequency 10 MHz to 10 GHz

1 GHz/div. Vertical scale is 3 dB/div. Dashed line at top is 0 dBKH6HTV-VIDEO www.kh6htv.com e-mail: [email protected] Boulder, Colorado, USA