model plvx ac-ac - leading distributor of electronic ... · pdf fileenhanced precision...
TRANSCRIPT
Enhanced Precision Displacement TransducerModel PLVX AC-AC
DESCRIPTIONModel PLVX displacement transducer is designed for single and
multi-point industrial gaging applications and micro-displace-
ment measurements in research and scientific studies. It incor-
porates non-rotating armatures to increase resistance to side
loads and improve repeatability. Bodies and probes are stainless
steel constructed and windings are magnetically shielded. Ultra
Precision LVDTs utilize spring loaded captive guided armatures
and low friction, non-rotating probes. Non-linearity is 0.25 % full
scale. The Model PLVX with a 0.02 in stroke range has a me-
chanical zero adjustment to correct pre- and over-travel.
FEATURES• Miniature design
• 0.25 % non-linearity
• Rugged, enhanced accuracy
• Enhanced immunity to electrical noise
• ±0.02 in to ±0.2 in range
• -58 °F to 257 °F operating range (standard)
• Non-rotating probe
• Stainless steel construction
• Extended life cycle
• Infinite resolution
• Captive guided spring return armature
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Model PLVX AC-AC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Stroke range ±0,51 mm to 5,08 mm [±0.02 in to 0.20 in]
Non-linearity (max.) ±0.25 % full scale
Non-repeatability (max.) 6 microinches
Output sensitivity See table
Output load (min.) 100000 ohm
Resolution Infinite
Phase shift <10° @ 5 kHz
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -40 °C to 100 °C [-40 °F to 212 °F]
Temperature effect, zero (max.)
0.005 % full scale/°F
Temperature effect, span (max.)
0.005 % full scale/°F
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Element type ac-ac displacement transducer
Input supply (calibrated) 5 V RMS @ 5 kHz
Input supply (acceptable) 1 V to 7 V RMS @ 2 kHz to 10 kHz
Electrical termination Multiconductor shielded cable
MECHANICAL SPECIFICATIONS
Characteristic Measure
Case material Stainless steel
Probe material Stainless steel
Armature type Captive guided spring return
Weight See table
Spring force (max.) See table
RANGE CODES
Range Code Available ranges
HI ±0,51 mm [±0.02 in]
HK ±1,02 mm [±0.04 in]
HM ±2,54 mm [±0.10 in]
HN ±5,08 mm [±0.20 in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±2,54 mm [±0.1 in]; ±0,51 mm [±0.02 in]; ±1,02 mm [±0.04 in]; ±0,25 mm [±0.01 in]
Electrical termination
Multiconductor shielded cable (1,83 m [6 ft])
Electrical cableorientation
Ra. Right angle cable exit
Mounting threads
TM392. 3/8-32 UNF threaded sleeve
Improved linearity
L10. ±0.1 % linearity* (only for ±1,02 mm [±0.04]; ±2,54 mm [±0.1]; ±5,08 mm [±0.2 in])
* Air activated model available. Consult factory for details
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell • Sensing and Control 3
Enhanced Precision Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code
Available stroke range
Lmm [in]
Nmm [in]
Dmm [in]
Xmm [in]
Approx. unit weight
Max. springforceg [oz]
Output sensitivitymV/V/ 0.001 in
HI ±0,51[±0.02] 25,9 [1.02] 5,59 [0.22] 8,00 [0.315] 7,62 [0.30] 12,76 [0.45] 99,23 [3.5] 6
HK ±1,02 [±0.04] 53,1 [2.09] 13,97 [0.55] 8,00 [0.315] 13,97 [0.55] 15,88 [0.56] 100,92 [3.56] 4
HM ±2,54 [±0.1] 56,9 [2.24] 18,03 [0.71] 8,00 [0.315] 20,1 [0.79] 17,86 [0.63] 117,93 [4.16] 4
HN ±5,08 [±0.2] 86,6 [3.41]* 29,97 [1.18] 8,00 [0.315] 22,1 [0.87] 22,11 [0.78] 149,97 [5.29] 4*
* New L dimension and output sensitivity for 5,08 mm [±0.2 in] range. For old L dimension and output sensitivity, consult factory.
Wire color Supply
Red (+) supply (calibrated @ 5 V RMS, 5 kHz)
Yellow Supply return
Blue Output
Green Output return
Black Secondary center tap (normally not connected)
Nominalelectriczeropoint
For reference only5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008749-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model PLVX AC-AC Enhanced Precision Displacement Transducer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Enhanced Precision Displacement TransducerModel S5 AC-AC
DESCRIPTIONModel S5 Ultra Precision displacement transducer is designed
for single and multi-point industrial gaging applications and
micro-displacement measurements in research and scientific
studies. It incorporates non-rotating armatures to increase
resistance to side loads and improve repeatability. Bodies and
probes are stainless steel constructed and windings
are magnetically shielded. Ultra Precision displacement trans-
ducers utilize spring loaded captive guided armatures and low
friction, non-rotating probes. Non-linearity is 0.25% full scale.
2,54 mm to 12,7 mm[0.10 in to 0.50 in]
0,25 mm to 1,02 mm[0.01 in to 0.04 in]
FEATURES• Miniature design
• 0.25 % non-linearity
• Rugged, enhanced accuracy
• Enhanced immunity to electrical noise
• ±0.01 in to ±0.5 in range
• -58 °F to 257 °F operating range (standard)
• Non-rotating probe
• Stainless steel construction
• Extended life cycle
• Infinite resolution
• Captive guided spring return armature
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Model S5 AC-AC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Stroke range ±0,25 mm to 12,7 mm [±0.10 in to 0.50 in]
Non-linearity (max.) ±0.25 % full scale
Non-repeatability <20 microinches
Output sensitivity See table
Output load (min.) 100000 ohm
Resolution Infinite
Phase shift <10° @ 5 kHz
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -20 °C to 125 °C [-4 °F to 257 °F]
Temperature effect, zero (max.)
0.006 % full scale/°F
Temperature effect, span (max.)
0.006 % full scale/°F
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Element type ac-ac displacement transducer
Input supply (calibrated) 5 V RMS @ 5 kHz
Input supply (acceptable) 1 V to 7 V RMS @ 2 kHz to 10 kHz
Electrical termination Multiconductor shielded cable
MECHANICAL SPECIFICATIONS
Characteristic Measure
Case material Stainless steel
Probe material Stainless steel
Armature type Captive guided spring return
Weight See table
Spring force (max.) See table
RANGE CODES
Range Code Available ranges
HH ±0,25 mm [±0.01 in]
HI ±0,51 mm [±0.02 in]
HK ±1,02 mm [±0.04 in]
HM ±2,54 mm [±0.10 in]
HN ±5,08 mm [±0.20 in]
HF ±7,62 mm [±0.30 in]
HG ±10,16 mm [±0.40 in]
HP ±12,7 mm [±0.50 in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±0,25 mm to 12,7 mm [±0.01 in to ±0.5 in]
Electrical termination
Multiconductor shielded cable (1,83 m [6 ft])
Electrical cableorientation
Ra. Right angle cable exit
Mounting threads
TM392. 3/8-32 UNF threaded sleeve
Improved linearity
L10. 0.1 % max. linearity (only for ±0,01 mm to 0,51 mm [±0.040 in to ±0.02 in])
Higher temperature
TM315. 204 °C [400 °F] up to 101,6 mm [±4.0 in]
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell • Sensing and Control 3
Enhanced Precision Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Rangecode
Available stroke rangemm [in]
Lmm [in]
Dmm [in]
Xmm [in]
Approx. unit weightg [oz]
Max. springforceg [oz]
Output sensitivitymV/V/ 0.001 in
HH ±0,25 [±0.01] 48,01 [1.89] 7,88 [0.31] 10,92 [0.43] 396,89 [14] 212,62 [7.5] 4
HI ±0,51 [±0.02] 48,01 [1.89] 7,88 [0.31] 10,92 [0.43] 396,89 [14] 212,62 [7.5] 4
HK ±1,02 [±0.04] 51,05 [2.01] 7,88 [0.31] 12,95 [0.51] 510,29 [18] 212,62 [7.5] 4
HM ±2,54 [±0.1] 61 [2.40] 9,4 [0.37] 11,43 [0.45] 623,69 [22] 119,92 [4.23] 4
HN ±5,08 [±0.2] 78 [3.07]* 9,4 [0.37] 11,43 [0.45] 737,09 [26] 129,84 [4.58] 4*
HF ±7,62 [±0.3] 87,89 [3.46] 9,4 [0.37] 15,24 [0.60] 250,49 [30] 244,94 [8.64] 2
HG ±10,16 [±0.4] 99,06 [3.90] 9,4 [0.37] 19,05 [0.75] 963,88 [34] 209,79 [7.40] 2
HP ±12,7 [±0.5] 120,90 [4.76] 9,4 [0.37] 21,59 [0.85] 1190,68 [42] 214,89 [7.58] 2
* New L dimension and output sensitivity for 5,08 mm [±0.2 in] range. For old L dimension and output sensitivity, consult factory.
Wire color Supply
Red (+) supply (calibrated @ 5 V RMS, 5 kHz)
Yellow Supply return
Blue Output
Green Output return
Black Secondary center tap (normally not connected)
Nominalelectriczeropoint
Nominalelectriczeropoint
For reference only
5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008748-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model S5 AC-AC Enhanced Precision Displacement Transducer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Long Stroke Displacement TransducerModel MVL7 AC-AC
DESCRIPTIONModel MVL7 (free unguided armature) ac-ac long stroke
displacement transducer is designed for measuring static and
dynamic displacements from ±0.5 in to ±8.0 in. This model
achieves an impressive 0.25 % full scale non-linearities. Dis-
placement transducer bodies and probes are constructed of
stainless steel for durability in harsh, industrial environments.
FEATURES• 0.25 % non-linearity
• Stainless steel construction
• Enhanced immunity to electrical noise
• Infinite resolution
• 12,7 mm to 203,2 mm [0.5 in to 8.0 in] range
• -58 °F to 257 °F operating range (standard)
• Free unguided armature
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Model MVL7 AC-AC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Stroke range ±12,7 mm to 203,2 mm [±0.5 in to 8.0 in]
Non-linearity (max.) ±0.25 % full scale
Non-repeatability (max.) Not applicable
Output sensitivity See table
Resolution Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -50 °C to 125 °C [-58 °F to 257 °F]
Temperature effect, zero (max.)
0.006 % full scale/°F
Temperature effect, span (max.)
0.006 % full scale/°F
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Element type ac-ac displacement transducer
Input supply (calibrated) 5 V RMS @ 5 kHz
Input supply (acceptable) 1 V to 7 V RMS @ 2 kHz to 10 kHz
Electrical termination Multiconductor shielded cable
MECHANICAL SPECIFICATIONS
Characteristic Measure
Case material Stainless steel
Probe material Stainless steel
Armature type Free unguided
Probe thread M5 x 0.8
Weight See table
Spring force (max.) Not applicable
RANGE CODES
Range Code Available ranges
HP ±12,7 mm [±0.5 in]
HQ ±25,4 mm [±1.0 in]
HR ±50,8 mm [±2.0 in]
HS ±76,2 mm [±3.0 in]
HT ±101,6 mm [±4.0 in]
HU ±152,4 mm [±6.0 in]
HV ±203,2 mm [±8.0 in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±12,7 mm to 203,2 mm [±0.5 in to 8.0 in]
Electrical termination
Multiconductor shielded cable (1,83 m [6 ft])TM405. Axial Bendix connector on body radial (side)TM406. Bendix connector on body
Electrical cableorientation
TM49. Axial cable exit
Mounting threads
TM511. 13/16-32 UNF
Improved linearity
L10. ±0.1 % max. linearity (less than or equal to ±101.6 mm [±4 in])
Higher temperature
TM315. 204 °C [400 °F] up to 101,6 mm [±4.0 in]
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell • Sensing and Control 3
Long Stroke Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Rangecode
Available strokerange
L X Approx. bodyweight
Approx. armatureweight
Typical full scale output at 3 V RMS
HP ±12,7 mm [±0.5 in] 127 mm [5.0 in] 43,18 mm [1.7 in] 170,1 g [6 oz] 35,44 g [1.25 oz] 2.4 V RMS
HQ ±25,4 mm [±1.0 in] 152,4 mm [6.0 in] 68,58 mm [2.7 in] 226,8 g [8 oz] 49,61 g [1.75 oz] 3.0 V RMS
HR ±50,8 mm [±2.0 in] 269,24 mm [10.6 in] 81,28 mm [3.2 in] 368,54 g [13 oz] 56,7 g [2.0 oz] 4.8 V RMS
HS ±76,2 mm [±3.0 in] 381 mm [15.0 in] 119,38 mm [4.7 in] 453,59 g [16 oz] 62,37 g [2.2 oz] 4.5 V RMS
HT ±101,6 mm [±4.0 in] 425,45 mm [16.75 in] 132,08 mm [5.2 in] 566,99 g [20 oz] 70,87 g [2.5 oz] 9.5 V RMS
HU ±152,4 mm [±6.0 in] 615,95 mm [24.25 in] 182,88 mm [7.2 in] 822,14 g [29 oz] 113,40 g [4.0 oz] 7.2 V RMS
HV ±203,2 mm [±8.0 in] 806,45 mm [31.75 in] 259,08 mm [10.2 in] 1190,68 g [42 oz] 144,58 g [5.1 oz] 4.8 V RMS
Wire color Supply
Red (+) supply (calibrated @ 5 V RMS, 5 kHz)
Yellow Supply return
Blue Output
Green Output return
Black Secondary center tap (normally not connected)
For reference only5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008752-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model MVL7 AC-AC Long Stroke Displacement Transducer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Long Stroke Displacement TransducerModel VL7A AC-AC
DESCRIPTIONModel VL7A (spring return armature) ac-ac long stroke displace-
ment transducer is designed for measuring static and dynamic
displacements from ±0.5 in to ±3.0 in. This model achieve
impressive 0.25 % full scale non-linearities. Displacement trans-
ducer bodies and probes are constructed of stainless steel for
durability in harsh, industrial environments.
FEATURES• 0.25 % non-linearity
• Stainless steel construction
• 12,7 mm to 76,2 mm [0.5 in to 3.0 in] range
• Enhanced immunity to electrical noise
• Infinite resolution
• -58 °F to 257 °F operating range (standard)
• Spring return armature
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Model VL7A AC-AC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Stroke range ±12,7 mm to 76,2 mm [±0.5 in to 3.0 in]
Non-linearity (max.) ±0.25 % full scale
Non-repeatability (max.) <20 microinches
Output sensitivity See table
Resolution Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -50 °C to 125 °C [-58 °F to 257 °F]
Temperature effect, zero (max.)
0.006 % full scale/°F
Temperature effect, span (max.)
0.006 % full scale/°F
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Element type ac-ac displacement transducer
Input supply (calibrated) 5 V RMS @ 5 kHz
Input supply (acceptable) 1 V to 7 V RMS @ 2 kHz to 10 kHz
Electrical termination Multiconductor shielded cable
MECHANICAL SPECIFICATIONS
Characteristic Measure
Case material Stainless steel
Probe material Stainless steel
Armature type Captive guided spring return
Probe thread Not applicable
Weight See table
Spring force (max.) 4 oz/in
RANGE CODES
Range Code Available ranges
HP ±12,7 mm [±0.5 in]
HQ ±25,4 mm [±1.0 in]
HR ±50,8 mm [±2.0 in]
HS ±76,2 mm [±3.0 in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±12,7 mm to ±50,8 mm [±0.5 in to ±2.0 in]; 76,2 mm [±3.0 in]
Electrical termination
Multiconductor shielded cable (1,83 m [6 ft])TM405. Axial Bendix connector on body radial (side)TM406. Bendix connector on body
Electrical cableorientation
TM49. Axial cable exit
Mountingthreads
TM511. 13/16-32 UNF
Improved linearity
L10. ±0.1 % max. linearity (less than or equal to 101,6 mm [±4.0 in]
Higher temperature
TM315. 204 °C [400 °F] up to 101,6 mm [±4.0 in]
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell • Sensing and Control 3
Long Stroke Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code Available stroke range L X Approx. unit weight Typical full scale outputat 3 V RMS
HP ±12,7 mm [±0.5 in] 135,89 mm [5.35 in] 38,1 mm [1.5 in] 184,27 g [6.5 oz] 2.4 V RMS
HQ ±25,4 mm [±1.0 in] 161,29 mm [6.35 in] 63,5 mm [2.5 in] 226,8 g [8.0 oz] 3.0 V RMS
HR ±50,8 mm [±2.0 in] 279,4 mm [11.0 in] 76,2 mm [3.0 in] 396,89 g [14 oz] 4.8 V RMS
HS ±76,2 mm [±3.0 in] 389,89 mm [15.35 in] 114,3 mm [4.5 in] 481,94 g [17 oz] 4.5 V RMS
Wire color Supply
Red (+) supply (calibrated @ 3 V RMS, 5 kHz)
Yellow Supply return
Blue Output
Green Output return
Black Secondary center tap (normally not connected)
For reference only
AA937
5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008751-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model VL7A AC-AC Long Stroke Displacement Transducer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Long Stroke Displacement TransducerModel MVL7C AC-AC
DESCRIPTIONModel MVL7C (captive guided armature) ac-ac long stroke
displacement transducer is designed for measuring static and
dynamic displacements from ±0.5 in to ±18.5 in. This model
achieves an impressive 0.25 % full scale non-linearity. Displace-
ment transducer bodies and probes are constructed of stainless
steel for durability in harsh, industrial environments.
FEATURES• 0.25 % non-linearity
• Stainless steel construction
• ±18.5 in long-stroke range available
• Enhanced immunity to electrical noise
• Infinite resolution
• 12,7 mm to 470 mm [0.5 in to 18.5 in] range
• -58 °F to 257 °F operating range (standard)
• Captive guided armature
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Model MVL7C AC-AC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Stroke range ±12,7 mm to 470 mm [±0.5 in to 18.5 in]
Non-linearity (max.)±12,5 mm to 254 mm [±0.5 in to ±10 in]
±0.25 % full scale
Non-linearity (max.)±381 mm to 470 mm[±15 in to 18.5 in]
±0.5 % full scale
Resolution Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -50 °C to 125 °C [-58 °F to 257 °F]
Temperature effect, zero (max.)
0.006 % full scale/°F
Temperature effect, span (max.)
0.006 % full scale/°F
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Element type ac-ac displacement transducer
Input supply (calibrated) 5 V RMS @ 5 kHz
Input supply (acceptable) 1 V to 7 V RMS @ 2 kHz to 10 kHz
Electrical termination Multiconductor shielded cable
MECHANICAL SPECIFICATIONS
Characteristic Measure
Case material Stainless steel
Probe material Stainless steel
Armature type Captive guided
Probe thread M5 x 0.8
Weight See table
Spring force (max.) Not applicable
RANGE CODES
Range Code Available ranges
HP ±12,7 mm [±0.5 in]
HQ ±25,4 mm [±1.0 in]
HR ±50,8 mm [±2.0 in]
HS ±76,2 mm [±3.0 in]
HT ±101,6 mm [±4.0 in]
HU ±152,4 mm [±6.0 in]
HV ±203,2 mm [±8.0 in]
HW ±254 mm [±10.0 in]
HY ±381 mm [±15.0 in]
HZ ±470 mm [±18.5 in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±12,7 mm to 470 mm [±0.5 in to 18.5 in]
Electrical termination
Multiconductor shielded cable (1,83 m [6 ft])TM405. Axial Bendix connector on body radial (side)TM406. Bendix connector on body
Electrical cableorientation
TM49. Axial cable exit
Mountingthreads
TM511. 13/16-32 UNF
Improved linearity
L10. ±0.1 % max. linearity (less than or equal to ±101.6 mm [±4 in])
Higher temperature
TM315. 204 °C [400 °F] up to 101,6 mm [±4.0 in]
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell • Sensing and Control 3
Long Stroke Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code Available stroke range L X Approx. unit weight Typical full scale outputat 3 V RMS
HP ±12,7 mm [±0.5 in] 152,4 mm [6.0 in] 38,1 mm [1.5 in] 283,5 g [10 oz] 2.4 V RMS
HQ ±25,4 mm [±1.0 in] 177,8 mm [7.0 in] 63,5 mm [2.5 in] 340,19 g [12 oz] 3.0 V RMS
HR ±50,8 mm [±2.0 in] 294,64 mm [11.6 in] 76,2 mm [3.0 in] 510,29 g [18 oz] 4.8 V RMS
HS ±76,2 mm [±3.0 in] 406,4 mm [16.0 in] 114,3 mm [4.5 in] 652,04 g [23 oz] 4.5 V RMS
HT ±101,6 mm [±4.0 in] 452,12 mm [17.8 in] 127,0 mm [5 in] 708,74 g [25 oz] 9.6 V RMS
HU ±152,4 mm [±6.0 in] 642,62 mm [25.3 in] 177,8 mm [7 in] 1020,6 g [36 oz] 7.2 V RMS
HV ±203,2 mm [±8.0 in] 833,12 mm [32.8 in] 254 mm [10 in] 1417,48 g [50 oz] 4.8 V RMS
HW ±254 mm [±10.0 in] 1028,7 mm [40.5 in] 304,8 mm [12 in] 1587,57 g [56 oz] 6.0 V RMS
HY ±381 mm [±15.0 in] 1435,1 mm [56.5 in] 406,4 mm [16 in] 2126,21 g [75 oz] 9.0 V RMS
HZ ±470 mm [±18.5 in] 1701,8 mm [67.0 in] 508 mm [20 in] 2523,11 g [89 oz] 11.1 V RMS
Wire color Supply
Red (+) supply (calibrated @ 5 V RMS, 5 kHz)
Yellow Supply return
Blue Output
Green Output return
Black Secondary center tap (normally not connected)
For reference only
5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008753-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model MVL7C AC-AC Long Stroke Displacement Transducer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Long Stroke Displacement TransducerModel JEC DC-DC
DESCRIPTIONModels JEC (free unguided armature) dc-dc long stroke
displacement transducers utilize an improved internal circuit
which incorporates both reverse polarity protection and voltage
regulation. These features eliminate the danger of permanent
damage if supply voltage is accidentally reversed, and ensure
that sensitivity will remain constant over large variations in sup-
ply voltage. These models require no further conditioning, thus
permitting easy operation.
FEATURES• Stainlesssteelconstruction
• Enhancedlifecycle
• Voltageregulation
• Singleordualsupplywiring(fieldselectable)
• Reversepolarityprotected
• NotRoHScompliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2Honeywell•SensingandControl
Model JEC DC-DC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Strokerange ±12,7 mm to 203,2 mm [±0.5 in to 8.0 in]
Non-linearity(max.) ±0.25 % full scale
Output load (min.) 2000 ohm with three-wire supply, 20000 ohm with floating supply
Output impedance 2 ohm
Output sensitivity ±5Vdcor0Vdcto10Vdc(fieldse-lectable)
Isolation 1000Vinputtooutput
Polarity Output is positive for outward stroke
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -50 °C to 70 °C [-58 °F to 158 °F]
Temperature effect, zero (max.)
0.006 % full scale/°F
Temperature effect, span (max.)
0.017 % full scale/°F
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Element type dc-dc displacement transducer
Power supply, single 24Vdcto40Vdc@30mA
Power supply, dual ±12Vdcto±20Vdc@30mA
Ripplepowersupply 30mVpeaktopeak
Electrical termination Multiconductor shielded cable (1.83 m [6 ft])
Reversepolarityprotection Yes
MECHANICAL SPECIFICATIONS
Characteristic Measure
Case material Stainlesssteel
Probe material Stainlesssteel
Armaturetype Free unguided
Probe thread M5x0.8
Weight Seetable
Springforce(max.) Notapplicable
RANGE CODES
Range Code Available ranges
HP ±12,7 mm [±0.5 in]
HQ ±25,4 mm [±1.0 in]
HR ±50,8 mm [±2.0 in]
HS ±76,2 mm [±3.0 in]
HT ±101,6 mm [±4.0 in]
HU ±152,4 mm [±6.0 in]
HV ±203,2 mm [±8.0 in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±12,7 mm to 203,2 mm [±0.5 in to 8.0 in]
Electrical termination
Multiconductor shielded cable (1.83 m [6 ft])TM405.AxialBendixconnectoronbodyradial(side)TM406.Bendixconnectoronbody
Electrical cable orientation
TM49.Axialcableexit
Mounting threads
TM511.13/16-32UNF
Improved linearity
L10.±0.1%max.linearity(lessthanorequalto±101.6 mm [±4 in])
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell•SensingandControl3
Long Stroke Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code
Available stroke range
L X Approx. body weight Approx. armature weight
HP ±12,7 mm [±0.5 in] 175,26 mm [6.9 in] 43,18 mm [1.7 in] 212,62 g [7.5 oz] 28,35 g [1.0 oz]
HQ ±25,4 mm [±1.0 in] 203,2 mm [8.0 in] 68,58 mm [2.7 in] 269,32 g [9.5 oz] 56,70 g [2.0 oz]
HR ±50,8 mm [±2.0 in] 317,5 mm [12.5 in] 81,28 mm [3.2 in] 368,54 g [13.0 oz] 70,87 g [2.5 oz]
HS ±76,2 mm [±3.0 in] 429,26 mm [16.9 in] 119,38 mm [4.7 in] 496,12 g [17.5 oz] 85,05 g [3.0 oz]
HT ±101,6 mm [±4.0 in] 474,98 mm [18.7 in] 132,08 mm [5.2 in] 623,69 g [22.0 oz] 99,22 g [3.5 oz]
HU ±152,4 mm [±6.0 in] 665,48 mm [26.2 in] 182,88 mm [7.2 in] 850,49 g [30.0 oz] 113,40 g [4.0 oz]
HV ±203,2 mm [±8.0 in] 855,98 mm [33.7 in] 259,08 mm [10.2 in] 1247,37 g [44.0 oz] 141,75 g [5.0 oz]
Wire color
Dual supply Single supply (floating)*
Outputs
Red 12Vto20Vinput 24Vto40Vinput
Blue -12Vto-20Vinput
Supplynegative
Black OV,I/P,O/Pcom-mon
Yellow 0Vto10V
Green ±5Vdc
* Output common floats at voltage source/2
For reference only
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SensingandControl
AutomationandControlSolutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008763-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model JEC DC-DC Long Stroke Displacement Transducer
Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeing free of defective materials and faulty workmanship. Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literatureandtheHoneywellwebsite,itisuptothecustomertodetermine the suitability of the product in the application.
Specificationsmaychangewithoutnotice.Theinformationwesupply is believed to be accurate and reliable as of this printing. However,weassumenoresponsibilityforitsuse.
FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensing or call [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES1.GM-Ashouldnotbeusedwithanamplifieddisplacementtransducer
unlessusinganexternalpowersupplytopowerthedisplacementtransducer.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Long Stroke Displacement TransducerModel JEC-AG DC-DC
DESCRIPTIONModels JEC-AG (captive guided spring return) dc-dc long stroke
displacement transducer utilizes an improved internal circuit
which incorporates both reverse polarity protection and voltage
regulation. These features eliminate the danger of permanent
damage if supply voltage is accidentally reversed, and ensure
that sensitivity will remain constant over large variations in sup-
ply voltage. These models require no further conditioning, thus
permitting easy operation.
FEATURES• Stainlesssteelconstruction
• Enhancedlifecycle
• Voltageregulation
• Reversepolarityprotected
• Singleordualsupplywiring(fieldselectable)
• Captive guided spring return armature
• NotRoHScompliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2Honeywell•SensingandControl
Model JEC-AG DC-DC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Strokerange ±12,7 mm to 76,2 mm [±0.5 in to 3.0 in]
Non-linearity(max.) ±0.25 % full scale
Output load (min.) 2000 ohm with three-wire supply; 20000 ohm with floating supply
Output impedance 2 ohm
Output sensitivity ±5Vdcor0Vdcto10Vdc(fieldse-lectable)
Isolation 1000Vinputtooutput
Polarity Output positive for outward stroke
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -50 °C to 80 °C [-58 °F to 176 °F]
Temperature effect, zero (max.)
0.006 % full scale/°F
Temperature effect, span (max.)
0.017 % full scale/°F
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Element type dc-dc displacement transducer
Power supply, single 24Vdcto40Vdc@30mA
Power supply, dual ±12Vdcto±20Vdc@30mA
Ripple 30mVpeaktopeak
Electrical termination Multiconductor shielded cable (1.83 m [6 ft])
Reversepolarityprotection Yes
MECHANICAL SPECIFICATIONS
Characteristic Measure
Case material Stainlesssteel
Probe material Stainlesssteel
Armature type Captive guided spring return
Probe thread Notapplicable
Weight Seetable
Springforce(max.) 4 oz/in
RANGE CODES
Range Code Available ranges
HP ±12,7 mm [±0.5 in]
HQ ±25,4 mm [±1.0 in]
HR ±50,8 mm [±2.0 in]
HS ±76,2 mm [±3.0 in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±12,7 mm [±0.5 in], ±25,4 mm [±1.0 in], ±50,8 mm [±2.0 in], 6,2 mm [3.0 in]
Electricaltermination
Multiconductor shielded cable (1.83 m [6 ft])TM405.AxialBendixconnectoronbodyradial(side)TM406.Bendixconnectoronbody
Electrical cableorientation
TM49.Axialcableexit
Mounting threads
TM511.13/16-32UNF
Improved linearity
L10.±0.1%max.linearity
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell•SensingandControl3
Long Stroke Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code Available stroke range L X Approx. unit weight
HP ±12,7 mm [±0.5 in] 190,5 mm [7.5 in] 38,1 mm [1.5 in] 226,7 g [8 oz]
HQ ±25,4 mm [±1.0 in] 209,6 mm [8.25 in] 63,5 mm [2.5 in] 283,5 g [10 oz]
HR ±50,8 mm [±2.0 in] 326,39 mm [12.85 in] 76,2 mm [3.0 in] 396,9 g [14 oz]
HS ±76,2 mm [±3.0 in] 438,15 mm [17.25 in] 114,3 mm [4.5 in] 510,29 g [18 oz]
Wire color Dual supply Single supply (floating)* Outputs
Red 12Vto20Vinput 24Vto40Vinput
Blue -12Vto-20Vinput
Supplynegative
Black OV,I/P,O/Pcommon
Yellow 0Vto10V
Green ±5Vdc
* Output common floats at voltage source/2
For reference only
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SensingandControl
AutomationandControlSolutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008762-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model JEC-AG DC-DC Long Stroke Displacement Transducer
Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeing free of defective materials and faulty workmanship. Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literatureandtheHoneywellwebsite,itisuptothecustomertodetermine the suitability of the product in the application.
Specificationsmaychangewithoutnotice.Theinformationwesupply is believed to be accurate and reliable as of this printing. However,weassumenoresponsibilityforitsuse.
FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensing or call [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES1.GM-Ashouldnotbeusedwithanamplifieddisplacementtransducer
unlessusinganexternalpowersupplytopowerthedisplacementtransducer.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Long Stroke Displacement TransducerModel JEC-C DC-DC
DESCRIPTIONModel JEC-C (captive guided armature) dc-dc long stroke dis-
placement transducer utilizes an improved internal circuit which
incorporates both reverse polarity protection and voltage regula-
tion. These features eliminate the danger of permanent damage
if supply voltage is accidentally reversed and ensure that sensi-
tivity will remain constant over large variations in supply voltage.
This model requires no further conditioning, thus permitting easy
operation. Stroke ranges from ±0.5 in to ±18.5 in are available.
FEATURES• Stainlesssteelconstruction
• ±18.5inlong-strokerangeavailable
• Enhancedlifecycle
• Voltageregulation
• Singleordualsupplywiring(fieldselectable)
• Reversepolarityprotected
• Captive guided
• NotRoHScompliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2Honeywell•SensingandControl
Model JEC-C DC-DC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Stroke range ±12,7 mm to 470 mm [±0.5 in to 18.5 in]
Non-linearity(max.)
±12,5 mm to 254 mm
[±0.5 in to ±10 in] ±0.25 % full scale
±381 mm to 470 mm
[±15 in to 18.5 in] ±0.5 % full scale
Output load (min.) 2000 ohm with three-wire supply;20000 ohm with floating supply
Output impedance 2 ohm
Output sensitivity ±5Vdcor0Vdcto10Vdc(fieldselectable)
Isolation 1000Vinputtooutput
Polarity Output positive for outward stroke
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -50 °C to 70 °C [-58 °F to 158 °F]
Temperature effect, zero(max.)
0.006 % full scale/°F
Temperature effect, span(max.)
0.017 % full scale/°F
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Element type dc-dc displacement transducer
Power supply, single 24Vdcto40Vdc@30mA
Power supply, dual ±12Vdcto±20Vdc@30mA
Ripple 30mVpeaktopeak
Electrical termination Multiconductor shielded cable (1.83 m [6 ft])
Reversepolarityprotection Yes
MECHANICAL SPECIFICATIONS
Characteristic Measure
Case material Stainless steel
Probe material Stainless steel
Armaturetype Captive guided
Probe thread M5x0.8
Weight See table
Springforce(max.) Notapplicable
RANGE CODES
Range Code Available ranges
HP ±12,7 mm [±0.5 in]
HQ ±25,4 mm [±1.0 in]
HR ±50,8 mm [±2.0 in]
HS ±76,2 mm [±3.0 in]
HT ±101,6 mm [±4.0 in]
HU ±152,4 mm [±6.0 in]
HV ±203,2 mm [±8.0 in]
HW ±254 mm [±10.0 in]
HY ±381 mm [±15.0 in]
HZ ±470 mm [±18.5 in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±12,7 mm to 470 mm [±0.5 in to 18.5 in]
Electrical termination
Multiconductor shielded cable (1.83 m [6 ft])TM405.AxialBendixconnectoronbodyradial(side)TM406.Bendixconnectoronbody
Electrical cable orientation
TM49.Axialcableexit
Mounting threads
TM511.13/16-32UNF
Improved linearity
L10.±0.1%max.linearity(lessthanorequalto±101.6 mm [±4 in])
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell•SensingandControl3
Long Stroke Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code Available stroke range L X Approx. unit weight
HP ±12,7 mm [±0.5 in] 190,5 mm [7.5 in] 38,1 mm [1.5 in] 340,9 g [12 oz]
HQ ±25,4 mm [±1.0 in] 219,15 mm [8.5 in] 63,5 mm [2.5 in] 396,9 g [14 oz]
HR ±50,8 mm [±2.0 in] 332,74 mm [13.1 in] 76,2 mm [3.0 in] 510,29 g [18 oz]
HS ±76,2 mm [±3.0 in] 444,5 mm [17.5 in] 114,3 mm [4.5 in] 623,6 g [22 oz]
HT ±101,6 mm [±4.0 in] 490,22 mm [19.3 in] 127 mm [5.0 in] 765,4 g [27 oz]
HU ±152,4 mm [±6.0 in] 680,72 mm [26.8 in] 177,8 mm [7.0 in] 1020,5 g [36 oz]
HV ±203,2 mm [±8.0 in] 871,22 mm [34.3 in] 254 mm [10 in] 1445 g [51.0 oz]
HW ±254 mm [±10.0 in] 1066,8 mm [42.0 in] 304,8 mm [12 in] 1672 g [59.0 oz]
HY ±381 mm [±15.0 in] 1473,2 mm [58.0 in] 406,4 mm [16 in] 2211 g [78.0 oz]
HZ ±470 mm [±18.5 in] 1740 mm [68.5 in] 508 mm [20 in] 2608 g [92.0 oz]
Wire color Dual supply Single supply (floating)* Outputs
Red 12Vto20Vinput
24Vto40Vinput
Blue -12Vto-20Vinput
Supply negative
Black OV,I/P,O/Pcommon
Yellow 0Vto10V
Green ±5Vdc
For reference only
* Output common floats at voltage source/2
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
AutomationandControlSolutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008764-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model JEC-C DC-DC Long Stroke Displacement Transducer
Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeing free of defective materials and faulty workmanship. Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literatureandtheHoneywellwebsite,itisuptothecustomertodetermine the suitability of the product in the application.
Specificationsmaychangewithoutnotice.Theinformationwesupply is believed to be accurate and reliable as of this printing. However,weassumenoresponsibilityforitsuse.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES1.GM-Ashouldnotbeusedwithanamplifieddisplacementtransducer
unlessusinganexternalpowersupplytopowerthedisplacementtransducer.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Long Stroke Displacement TransducerModel DLB DC-DC
FEATURES• ±0.25%non-linearity
• ±12,7mmto±203,2mm[±0.5into±8in]
• Lowvoltagerequirements
• Easytooperate
• Stainlesssteelconstruction
• Reversepolarityprotected
• Singleordualsupplywiring(fieldselectable)
• Infiniteresolution
• Freeunguidedarmature
• NotRoHScompliant
DESCRIPTIONModelDLB(freeunguided)displacementtransduceroperates
fromeither5Vdcregulatedor6Vdcto18Vdcunregulated
andgeneratesanoutputsignalof±2Vdc.Theoutputsignalis
electricallyisolatedfromtheinputvoltageandcanbeusedwith
digitalpanelmeterstofromacompletereadoutsystem.The
DLB,freeunguidedisavailablewithstrokerangesof±0.5into
±8.0in.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2Honeywell•SensingandControl
Model DLB DC-DC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Strokerange ±12,7mmto203,2mm[±0.5into8.0in]
Non-linearity(max.) ±0.25%fullscale
Outputload(min.) 2000ohm
Outputimpedance 2ohm
Outputsensitivity ±2Vdc(nominal)
Isolation 1000Vinputtooutput
Polarity Outputpositiveforoutwardstroke
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature,operating -50°Cto70°C[-58°Fto158°F]
Temperatureeffect,zero(max.)
0.006%fullscale/°F
Temperatureeffect,span(max.)
0.017%fullscale/°F
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Elementtype dc-dcdisplacementtransducer
Inputsupply(acceptable),regulated
5Vdc@100mAmax.
Inputsupply(acceptable),unregulated
6Vto18Vdc@100mAmax.
Ripple 30mVpeaktopeak
Electricaltermination Multiconductorshieldedcable(1.83m[6ft])
Reversepolarityprotection Yes
MECHANICAL SPECIFICATIONS
Characteristic Measure
Casematerial Stainlesssteel
Probematerial Stainlesssteel
Armaturetype Freeunguided
Probethread M5x0.8
Weight Seetable
Springforce(max.) Notapplicable
RANGE CODES
Range Code Available ranges
HP ±12,7mm[±0.5in]
HQ ±25,4mm[±1.0in]
HR ±50,8mm[±2.0in]
HS ±76,2mm[±3.0in]
HT ±101,6mm[±4.0in]
HU ±152,4mm[±6.0in]
HV ±203,2mm[±8.0in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±12,7mmto203,2mm[±0.5into8.0in]
Electrical termination
Multiconductorshieldedcable(1.83m[6ft])TM405.AxialBendixconnectoronbodyradial(side)TM406.Bendixconnectoronbody
Electrical cableorientation
TM49.Axialcableexit
Mounting threads
TM511.13/16-32UNF
Improved linearity
L10.±0.1%max.linearity(lessthanorequalto±101.6mm[±4in])
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell•SensingandControl3
Long Stroke Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code Available stroke range L X Approx. body weight Approx. armature weight
HP ±12,7mm[±0.5in] 175,26mm[6.9in] 43,18mm[1.7in] 212,62g[7.5oz] 28,35g[1.0oz]
HQ ±25,4mm[±1.0in] 200,6mm[7.9in] 68,58mm[2.7in] 269,32g[9.5oz] 56,70g[2.0oz]
HR ±50,8mm[±2.0in] 317,5mm[12.5in] 81,28mm[3.2in] 368,54g[13.0oz] 70,87g[2.5oz]
HS ±76,2mm[±3.0in] 429,26mm[16.9in] 119,38mm[4.7in] 496,12g[17.5oz] 85,05g[3.0oz]
HT ±101,6mm[±4.0in] 472,44mm[18.6in] 132,08mm[5.2in] 623,69g[22.0oz] 99,22g[3.5oz]
HU ±152,4mm[±6.0in] 662,94mm[26.1in] 182,88mm[7.2in] 850,49g[30.0oz] 113,40g[4.0oz]
HV ±203,2mm[±8.0in] 853,44mm[33.6in] 259,08mm[10.2in] 1247,37g[44.0oz] 141,75g[5.0oz]
Wire color 5 V supply 6 Vdc to 18 Vdc supply
Yellow 5Vinput Connecttobrown
Brown Insulate Connecttoyellow
Red Insulate 6Vdcto18Vdc
Blue Supplycommon(0V) Supplycommon(0V)
Black Outputlow Outputlow
Green Outputhigh Outputhigh
Shield Instrumentground Instrumentground
Note: Incorrect connection may cause irreparable damage, consult factory for assistance.
For reference only
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SensingandControl
AutomationandControlSolutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008760-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model DLB DC-DC Long Stroke Displacement Transducer
Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective.The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
Whileweprovideapplicationassistancepersonally,throughourliteratureandtheHoneywellwebsite,itisuptothecustomertodeterminethesuitabilityoftheproductintheapplication.
Specificationsmaychangewithoutnotice.Theinformationwesupplyisbelievedtobeaccurateandreliableasofthisprinting.However,weassumenoresponsibilityforitsuse.
FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES1.GM-Ashouldnotbeusedwithanamplifieddisplacementtransducer
unlessusinganexternalpowersupplytopowerthedisplacementtransducer.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Long Stroke Displacement TransducerModel DLE DC-DC
FEATURES• ±0.25%non-linearity
• ±12,7mmto470mm[±0.5into18.5in]range
• Lowvoltagerequirements
• Easytooperate
• Stainlesssteelconstruction
• Reversepolarityprotected
• Singleordualsupplywiring(fieldselectable)
• Infiniteresolution
• Captiveguidedarmature
• NotRoHScompliant
DESCRIPTIONModelDLE(captiveguidedarmature)operatesfromeither5
Vdcregulatedor6Vdcto18Vdcunregulatedandgeneratean
outputsignalof±2Vdc.Theoutputsignaliselectricallyisolated
fromtheinputvoltageandcanbeusedwithdigitalpanelmeters
tofromacompletereadoutsystem.TheDLE,captiveguided
armaturehasstrokerangesof±0.5into±18.5in.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2Honeywell•SensingandControl
Model DLE DC-DC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Strokerange ±12,7mmto470mm[±0.5into18.5in]
Non-linearity(max.)±12,5mmto254mm[±0.5into±10in]
±0.25%fullscale
Non-linearity(max.)±381mmto470mm[±15into18.5in]
±0.5%fullscale
Outputload(min.) 2000ohm
Outputimpedance 2ohm
Outputsensitivity ±2Vdc(nominal)
Isolation 1000Vinputtooutput
Polarity Outputpositiveforoutwardstroke
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature,operating -50°Cto70°C[-58°Fto158°F]
Temperatureeffect,zero(max.)
0.006%fullscale/°F
Temperatureeffect,span(max.)
0.017%fullscale/°F
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Elementtype dc-dcdisplacementtransducer
Inputsupply(acceptable),regulated
5Vdc@100mAmax.
Inputsupply(acceptable),unregulated
6Vdcto18Vdc@100mAmax.
Ripple 30mVpeaktopeak
Electricaltermination Multiconductorshieldedcable(1.83m[6ft])
Reversepolarityprotection Yes
MECHANICAL SPECIFICATIONS
Characteristic Measure
Casematerial Stainlesssteel
Probematerial Stainlesssteel
Armaturetype Captiveguided
Probethread M5x0.8
Weight Seetable
Springforce(max.) Notapplicable
RANGE CODES
Range Code Available ranges
HP ±12,7mm[±0.5in]
HQ ±25,4mm[±1.0in]
HR ±50,8mm[±2.0in]
HS ±76,2mm[±3.0in]
HT ±101,6mm[±4.0in]
HU ±152,4mm[±6.0in]
HV ±203,2mm[±8.0in]
HW ±254mm[±10.0in]
HY ±381mm[±15.0in]
HZ ±470mm[±18.5in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±12,7mmto470mm[±0.5into18.5in]
Electrical termination
Multiconductorshieldedcable(1.83m[6ft])TM405.AxialBendixconnectoronbodyradial(side)TM406.Bendixconnectoronbody
Electrical cable orientation
TM49.Axialcableexit
Mounting threads
TM511.13/16-32UNF
Improved linearity
L10.±0.1%max.linearity(lessthanorequalto±101.6mm[±4in])
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell•SensingandControl3
Long Stroke Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code Available stroke range L X Approx. unit weight
HP ±12,7mm[±0.5in] 190,5mm[7.5in] 38,1mm[1.5in] 340,9g[12oz]
HQ ±25,4mm[±1.0in] 215,9mm[8.5in] 63,5mm[2.5in] 396,9g[14oz]
HR ±50,8mm[±2.0in] 332,74mm[13.1in] 76,2mm[3.0in] 510,29g[18oz]
HS ±76,2mm[±3.0in] 444,5mm[17.5in] 114,3mm[4.5in] 623,6g[22oz]
HT ±101,6mm[±4.0in] 490,22mm[19.3in] 127mm[5.0in] 765,4g[27oz]
HU ±152,4mm[±6.0in] 680,72mm[26.8in] 177,8mm[7.0in] 1020,5g[36oz]
HV ±203,2mm[±8.0in] 871,22mm[34.3in] 254mm[10in] 1445g[51oz]
HW ±254mm[±10.0in] 1066,8mm[42.0in] 304,8mm[12in] 1672g[59oz]
HY ±381mm[±15.0in] 1473,2mm[58.0in] 406,4mm[16in] 2211g[78oz]
HZ ±470mm[±18.5in] 1740mm[68.5in] 508mm[20in] 2608g[92oz]
Wire color 5 V supply 6 Vdc to 18 Vdc supply
Yellow 5Vinput Connecttobrown
Brown Insulate Connecttoyellow
Red Insulate 6Vdcto18Vdc
Blue Supplycommon(0V) Supplycommon(0V)
Black Outputlow Outputlow
Green Outputhigh Outputhigh
Shield Instrumentground Instrumentground
For reference only
Note: Incorrect connection may cause irreparable damage, consult factory for assistance.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SensingandControl
AutomationandControlSolutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008761-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model DLE DC-DC Long Stroke Displacement Transducer
Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective.The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
Whileweprovideapplicationassistancepersonally,throughourliteratureandtheHoneywellwebsite,itisuptothecustomertodeterminethesuitabilityoftheproductintheapplication.
Specificationsmaychangewithoutnotice.Theinformationwesupplyisbelievedtobeaccurateandreliableasofthisprinting.However,weassumenoresponsibilityforitsuse.
FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES1.GM-Ashouldnotbeusedwithanamplifieddisplacementtransducer
unlessusinganexternalpowersupplytopowerthedisplacementtransducer.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Long Stroke Displacement TransducerModel DLF DC-DC
DESCRIPTIONModel DLF (captive guided spring return) operates from either 5
Vdc regulated or 6 Vdc to 18 Vdc unregulated and generate an
output signal of ±2 Vdc. The output signal is electrically isolated
from the input voltage and can be used with digital panel meters
to from a complete readout system. The DLF, captive guided
spring return, from 0.5 in to 3.0 in.
FEATURES• ±0.25%non-linearity
• ±12,7mmto76,2mm[±0.5into3.0in]range
• Lowvoltagerequirements
• Easytooperate
• Stainlesssteelconstruction
• Reversepolarityprotected
• Singleordualsupplywiring(fieldselectable)
• Infiniteresolution
• Captiveguidedspringreturnarmature
• NotRoHScompliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2Honeywell•SensingandControl
Model DLF DC-DC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Strokerange ±12,7mmto76,2mm[±0.5into3in]
Non-linearity(max.) ±0.25%fullscale
Output load (min.) 2000 ohm
Output impedance 2 ohm
Output sensitivity ±2 Vdc (nominal)
Isolation 1000 V input to output
Polarity Outputpositiveforoutwardstroke
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -50°Cto70°C[-58°Fto158°F]
Temperature effect, zero (max.)
0.006%fullscale/°F
Temperature effect, span (max.)
0.017%fullscale/°F
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Elementtype dc-dcdisplacementtransducer
Inputsupply(acceptable),regulated
5Vdc@100mAmax.
Inputsupply(acceptable),unregulated
6Vdcto18Vdc@100mAmax.
Ripple 30mVpeaktopeak
Electricaltermination Multiconductor shielded cable (1.83 m [6ft])
Reversepolarityprotection Yes
MECHANICAL SPECIFICATIONS
Characteristic Measure
Casematerial Stainlesssteel
Probe material Stainlesssteel
Armature type Captiveguidedspringreturn
Probe thread N/A
Weight Seetable
Springforce(max.) 4.0oz/in
RANGE CODES
Range Code Available ranges
HP ±12,7mm[±0.5in]
HQ ±25,4mm[±1.0in]
HR ±50,8mm[±2.0in]
HS ±76,2mm[±3.0in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±12,7mmto76,2mm[±0.5into3in]
Electrical termination
Multiconductorshieldedcable(1.83m[6ft])TM405.AxialBendixconnectoronbodyradial(side)TM406.Bendixconnectoronbody
Electrical cableorientation
TM49.Axialcableexit
Mounting threads
TM511.13/16-32UNF
Improved linearity
L10.±0.1%max.linearity
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell•SensingandControl3
Long Stroke Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code Available stroke range L X Approx. unit weight
HP ±12,7mm[±0.5in] 184,15mm[7.25in] 38,1mm[1.5in] 226,7g[8oz]
HQ ±25,4mm[±1.0in] 209,6mm[8.25in] 63,5mm[2.5in] 283,5g[10oz]
HR ±50,8mm[±2.0in] 326,39mm[12.85in] 76,2mm[3.0in] 396,9g[14oz]
HS ±76,2mm[±3.0in] 438,15mm[17.25in] 114,3mm[4.5in] 510,29g[18oz]
Wire color 5 V supply 6 Vdc to 18 Vdc supply
Yellow 5 V input Connecttobrown
Brown Insulate Connecttoyellow
Red Insulate 6 Vdc to 18 Vdc
Blue Supplycommon(0V) Supplycommon(0V)
Black Output low Output low
Green Output high Output high
Shield Instrumentground Instrumentground
For reference only
Note: Incorrect connection may cause irreparable damage, consult factory for assistance.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SensingandControl
AutomationandControlSolutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008759-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model DLF DC-DC Long Stroke Displacement Transducer
Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literatureandtheHoneywellwebsite,itisuptothecustomertodetermine the suitability of the product in the application.
Specificationsmaychangewithoutnotice.Theinformationwesupply is believed to be accurate and reliable as of this printing. However,weassumenoresponsibilityforitsuse.
FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES1.GM-Ashouldnotbeusedwithanamplifieddisplacementtransducer
unlessusinganexternalpowersupplytopowerthedisplacementtransducer.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Submersible* Displacement TransducerModel LW7S AC-AC
FEATURES• ±0.25%non-linearity
• Submersible
• Stainlesssteelconstruction
• ±12,7mmto76,2mmrange[±0.5into±3.0inrange]
• Enhancedimmunitytoelectricalnoise
• Submersiblematingconnectorwith5m{16ft]cable
• Easytooperate
• Captiveguidedspringreturnarmature
• Infiniteresolution
• NotRoHScompliant
DESCRIPTIONModelLW7Ssubmersibledisplacementtransducerisoftenideal
fordrilling,mining,andhydraulicengineeringapplicationswhich
requireadisplacementtransducerwithastainlesssteel,water-
proofconstruction.Thismodelmaybeusedasdirectmeasur-
inglineardisplacementdeviceorpositionalfeedbackelement
indynamicsystems.Theyaresuitableforsubmersioninfresh
waterandsomecorrosivefluidsforlongperiods.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2Honeywell•SensingandControl
Model LW7S AC-AC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Strokerange ±12,7mmto76,2mm[±0.5into3.0in]
Non-linearity(max.) ±0.25%fullscale
Non-repeatability(max.) <20microinches
Outputsensitivity Seetable
Resolution Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature,operating -40°Cto90°C[-40°Fto194°F]
Temperatureeffect,zero(max.)
0.005%fullscale/°F
Temperatureeffect,span(max.)
0.005%fullscale/°F
Pressurerating,standard 150psi,upto3000psiwithcableop-tions
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Elementtype ac-acdisplacementtransducer
Inputsupply(calibrated) 5VRMS@5kHz
Inputsupply(acceptable) 1Vto7VRMS@5kHz
Outputload(minimum) 100000ohm
Electricaltermination Submersiblematingconnectorwith5.03m[16.5ft]cable
MECHANICAL SPECIFICATIONS
Characteristic Measure
Casematerial Stainlesssteel
Probematerial Stainlesssteel
Armaturetype Captiveguidedspringreturn
Probethread Notapplicable
Springforce(max.) 4oz/in
RANGE CODES
Range Code Available ranges
HP ±12,7mm[±0.5in]
HQ ±25,4mm[±1.0in]
HR ±50,8mm[±2.0in]
HS ±76,2mm[±3.0in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±12,7mmto76,2mm[±0.5into3in]
Electrical termination
Multiconductorshieldedcable(1.83m[6.0ft])OPT1.Noconnectororcable,terminatedwithsoldierpinsOPT5.Mineralinsulatedweldedstainlesssteelsheathedcable(3mm[0.12in]dia.cable,50m[1ftto164ft]lengthsavailable,-55°Cto200°C[-67°Fto390°F],200bar[3000psi]
Electrical cable orientation
OPT7.Radialoutputsubmersibleconnectorwith5.03m[16.5ft]cable
Improved linearity
L10.±0.1%max.linearity(lessthanorequalto±101.6mm[±4in])
Higher temperature
TM315.204°C[400°F](lessthanorequalto±101.6mm[±4in])
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell•SensingandControl3
Submersible* Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code
Available strokerange
L X Spring force oz/in Typical full scale output at 5 V RMS
HP ±12,7mm[±0.5in] 152,90mm[6.02in] 38,1mm[1.5in] 4 3.5VRMS
HQ ±25,4mm[±1.0in] 180,85mm[7.12in] 63,5mm[2.5in] 4 4.5VRMS
HR ±50,8mm[±2.0in] 304,04mm[11.97in] 76,2mm[3.0in] 4 7.6VRMS
HS ±76,2mm[±3.0in] 419,86mm[16.53in] 114,3mm[4.5in] 4 7.5VRMS
Wire color Dual power supply
Brown Supply
White Supplyreturn
Blue Output
Black Outputreturn
For reference only
5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SensingandControl
AutomationandControlSolutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008743-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model LW7S AC-AC Submersible* Displacement Transducer
Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective.The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
Whileweprovideapplicationassistancepersonally,throughourliteratureandtheHoneywellwebsite,itisuptothecustomertodeterminethesuitabilityoftheproductintheapplication.
Specificationsmaychangewithoutnotice.Theinformationwesupplyisbelievedtobeaccurateandreliableasofthisprinting.However,weassumenoresponsibilityforitsuse.
FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES*Notrecommendedforsaltwateruse.Consultfactoryforsaltwatersubmersibleapplications.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Submersible* Displacement TransducerModel LW7C AC-AC
FEATURES• ±0.25%non-linearity
• Submersible
• Stainlesssteelconstruction
• ±12,7mmto101,6mmrange[±0.5into±4.0inrange]
• Enhancedimmunitytoelectricalnoise
• Submersiblematingconnectorwith5m{16ft]cable
• Easytooperate
• Captiveguidedarmature
• Infiniteresolution
• NotRoHScompliant
DESCRIPTIONModelLW7Csubmersibledisplacementtransducerisoftenideal
fordrilling,mining,andhydraulicengineeringapplicationswhich
requireadisplacementtransducerwithastainlesssteel,water-
proofconstruction.Thismodelmaybeusedasdirectmeasuring
lineardisplacementdeviceorpositionalfeedbackelementindy-
namicsystems.Theyaresuitableforsubmersioninfreshwater
andsomecorrosivefluidsforlongperiods.Thecaptiveguided
springreturnarmatureisfittedwithaballendedprobe.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2Honeywell•SensingandControl
Model LW7C AC-AC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Strokerange ±12,7mmto101,6mm[±0.5into4.0in]
Non-linearity(max.) ±0.25%fullscale
Outputsensitivity Seetable
Resolution Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature,operating -40°Cto90°C[-40°Fto194°F]
Temperatureeffect,zero(max.)
0.005%fullscale/°F
Temperatureeffect,span(max.)
0.005%fullscale/°F
Pressurerating,standard 150psi,upto3000psiwithcableop-tions
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Elementtype ac-acdisplacementtransducer
Inputsupply(calibrated) 5VRMS@5kHz
Inputsupply(acceptable) 1Vto7VRMS@5kHz
Outputload(minimum) 100000ohm
Electricaltermination Submersiblematingconnectorwith5.03m[16.5ft]cable
MECHANICAL SPECIFICATIONS
Characteristic Measure
Casematerial Stainlesssteel
Probematerial Stainlesssteel
Armaturetype Captiveguided
Probethread M5x0.8
Springforce(max.) Notapplicable
RANGE CODES
Range Code Available ranges
HP ±12,7mm[±0.5in]
HQ ±25,4mm[±1.0in]
HR ±50,8mm[±2.0in]
HS ±76,2mm[±3.0in]
HT ±101,6mm[±4.0in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±12,7mmto101,6mm[±0.5into4in]
Electrical termination
Multiconductorshieldedcable(1.83m[6.0ft])OPT1.Noconnectororcable,terminatedwithsoldierpinsOPT5.Mineralinsulatedweldedstainlesssteelsheathedcable(3mm[0.12in]dia.cable,50m[1ftto164ft]lengthsavailable,-55°Cto200°C[-67°Fto390°F],200bar[3000psi]
Electrical cable orientation
OPT7.Radialoutputsubmersibleconnectorwith5.03m[16.5ft]cable
Improved linearity
L10.±0.1%max.linearity(lessthanorequalto±101.6mm[±4in])
Higher temperature
TM315.204°C[400°F](lessthanorequalto±101.6mm[±4in])
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell•SensingandControl3
Submersible* Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code
Available strokerange
L X Weight armature Typical full scale output at 5 V RMS
HP ±12,7mm[±0.5in] 152,90mm[6.02in] 38,1mm[1.5in] 21,26g[0.75oz] 3.5VRMS
HQ ±25,4mm[±1.0in] 180,85mm[7.12in] 63,5mm[2.5in] 28,35g[1.0oz] 4.5VRMS
HR ±50,8mm[±2.0in] 304,04mm[11.97in] 76,2mm[3.0in] 42,52g[1.5oz] 7.6VRMS
HS ±76,2mm[±3.0in] 419,86mm[16.53in] 114,3mm[4.5in] 85,05g[3.0oz] 7.5VRMS
HT ±101,6mm[±4.0in] 452,88mm[17.83in] 127mm[5.0in] 104,89g[3.7oz] 16.05VRMS
Wire color Dual power supply
Brown Supply
White Supplyreturn
Blue Output
Black Outputreturn
For reference only
5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SensingandControl
AutomationandControlSolutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008744-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model LW7C AC-AC Submersible* Displacement Transducer
Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective.The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
Whileweprovideapplicationassistancepersonally,throughourliteratureandtheHoneywellwebsite,itisuptothecustomertodeterminethesuitabilityoftheproductintheapplication.
Specificationsmaychangewithoutnotice.Theinformationwesupplyisbelievedtobeaccurateandreliableasofthisprinting.However,weassumenoresponsibilityforitsuse.
FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES*Notrecommendedforsaltwateruse.Consultfactoryforsaltwatersubmersibleapplications.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Submersible* Displacement TransducerModel LW7U AC-AC
FEATURES• ±0.25%non-linearity
• Submersible
• Stainlesssteelconstruction
• ±12,7mmto101,6mmrange[±0.5into±4.0inrange]
• Enhancedimmunitytoelectricalnoise
• Submersiblematingconnectorwith5m{16ft]cable
• Easytooperate
• Freeunguidedarmature
• Infiniteresolution
• NotRoHScompliant
DESCRIPTIONModelLW7Usubmersibledisplacementtransducerisoftenideal
fordrilling,mining,andhydraulicengineeringapplicationswhich
requireadisplacementtransducerwithastainlesssteel,water-
proofconstruction.Thismodelmaybeusedasdirectmeasur-
inglineardisplacementdeviceorpositionalfeedbackelement
indynamicsystems.Theyaresuitableforsubmersioninfresh
waterandsomecorrosivefluidsforlongperiods.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2Honeywell•SensingandControl
Model LW7U AC-AC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Strokerange ±12,7mmto101,6mm[±0.5into4.0in]
Non-linearity(max.) ±0.25%fullscale
Outputsensitivity Seetable
Resolution Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature,operating -40°Cto90°C[-40°Fto194°F]
Temperatureeffect,zero(max.)
0.005%fullscale/°F
Temperatureeffect,span(max.)
0.005%fullscale/°F
Pressurerating,standard 150psi,upto3000psiwithcableop-tions
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Elementtype ac-acdisplacementtransducer
Inputsupply(calibrated) 5VRMS@5kHz
Inputsupply(acceptable) 1Vto7VRMS@5kHz
Outputload(minimum) 100000ohm
Electricaltermination Submersiblematingconnectorwith5.03m[16.5ft]cable
MECHANICAL SPECIFICATIONS
Characteristic Measure
Casematerial Stainlesssteel
Probematerial Stainlesssteel
Armaturetype Freeunguided
Probethread M5x0.8
Springforce(max.) Notapplicable
RANGE CODES
Range Code Available ranges
HP ±12,7mm[±0.5in]
HQ ±25,4mm[±1.0in]
HR ±50,8mm[±2.0in]
HS ±76,2mm[±3.0in]
HT ±101,6mm[±4.0in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±12,7mmto101,6mm[±0.5into4in]
Electrical termination
Submersiblematingconnectorwith1.83m[6.0ft]cableOPT1.Noconnectororcable,terminatedwithsoldierpinsOPT5.Mineralinsulatedweldedstainlesssteelsheathedcable(3mm[0.12in]dia.cable,50m[1ftto164ft]lengthsavailable,-55°Cto200°C[-67°Fto390°F],200bar[3000psi]
Electrical cable orientation
OPT7.Radialoutputsubmersibleconnectorwith5.03m[16.5ft]cable
Improved linearity
L10.±0.1%max.linearity(lessthanorequalto±101.6mm[±4in])
Higher temperature
TM315.204°C[400°F](lessthanorequalto±101.6mm[±4in])
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell•SensingandControl3
Submersible* Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code
Available strokerange
L X Weight armature Typical full scale output at 5 V RMS
HP ±12,7mm[±0.5in] 152,90mm[6.02in] 38,1mm[1.5in] 21,26g[0.75oz] 3.5VRMS
HQ ±25,4mm[±1.0in] 180,85mm[7.12in] 63,5mm[2.5in] 28,35g[1.0oz] 4.5VRMS
HR ±50,8mm[±2.0in] 304,04mm[11.97in] 76,2mm[3.0in] 42,52g[1.5oz] 7.6VRMS
HS ±76,2mm[±3.0in] 419,86mm[16.53in] 114,3mm[4.5in] 85,05g[3.0oz] 7.5VRMS
HT ±101,6mm[±4.0in] 452,88mm[17.83in] 127mm[5.0in] 104,89g[3.7oz] 16.05VRMS
Wire color Dual power supply
Brown Supply
White Supplyreturn
Blue Output
Black Outputreturn
[0.06 in]
For reference only
5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SensingandControl
AutomationandControlSolutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008745-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model LW7U AC-AC Submersible* Displacement Transducer
Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective.The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
Whileweprovideapplicationassistancepersonally,throughourliteratureandtheHoneywellwebsite,itisuptothecustomertodeterminethesuitabilityoftheproductintheapplication.
Specificationsmaychangewithoutnotice.Theinformationwesupplyisbelievedtobeaccurateandreliableasofthisprinting.However,weassumenoresponsibilityforitsuse.
FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES*Notrecommendedforsaltwateruse.Consultfactoryforsaltwatersubmersibleapplications.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Submersible* Displacement TransducerModel DW7S DC-DC
FEATURES• ±0.25%non-linearity
• Submersible
• Stainlesssteelconstruction
• Easytooperate
• 5m[16ft]submersiblematingconnector(standard)
• ±12,7mmto76,2mmrange[±0.5into±3.0inrange]
• Infiniteresolution
• Singleordualsupplywiring(fieldselectable)
• Reversepolarityprotected
• Captiveguidedspringreturnarmature
• NotRoHScompliant
DESCRIPTIONModelDW7Ssubmersibledisplacementtransducerisoftenideal
fordrilling,mining,andhydraulicengineeringapplicationswhich
requireadisplacementtransducerwithastainlesssteel,water-
proofconstruction.Thismodelmaybeusedasdirectmeasuring
lineardisplacementdevicesorpositionalfeedbackelements
indynamicsystems.Theyaresuitableforsubmersioninfresh
waterandsomecorrosivefluidsforlongperiods.Thecaptive
guidedspringreturnarmatureisfittedwithaball-endedprobe.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2Honeywell•SensingandControl
Model DW7S DC-DC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Strokerange ±12,7mmto76,2mm[±0.5into3in]
Non-linearity(max.) ±0.25%fullscale
Non-repeatability(max.) <20microinches
Outputsensitivity Seetable
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature,operating -40°Cto70°C[-40°Fto158°F]
Temperatureeffect,zero(max.)
0.005%fullscale/°F
Temperatureeffect,span(max.)
0.015%fullscale/°F
Pressurerating,standard 150psi,upto3000psiwithcableop-tions
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Elementtype dc-dcdisplacementtransducer
Inputsupply(acceptable) ±10Vdcto20Vdcunregulated(45mAmax.)or
20Vdcto40Vdcunregulated(45mAmax.)
Electricaltermination Submersiblematingconnectorwith5.03m[16.5ft]cable
MECHANICAL SPECIFICATIONS
Characteristic Measure
Casematerial Stainlesssteel
Probematerial Stainlesssteel
Armaturetype Captiveguidedspringreturn
Probethread Notapplicable
Springforce(max.) 4oz/in
RANGE CODES
Range Code Available ranges
HP ±12,7mm[±0.5in]
HQ ±25,4mm[±1.0in]
HR ±50,8mm[±2.0in]
HS ±76,2mm[±3.0in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±12,7mmto76,2mm[±0.5into3in]
Electrical termination
Submersiblematingconnectorwith5.03m[16.5ft]cableOPT1.Noconnectororcable,terminatedwithsoldierpinsOPT5.Mineralinsulatedweldedstainlesssteelsheathedcable(3mm[0.12in]dia.cable,50m[1ftto164ft]lengthsavailable,-55°Cto200°C[-67°Fto390°F],200bar[3000psi]
Electrical cable orientation
OPT7.Radialoutputsubmersibleconnectorwith5.03m[16.5ft]cable
Improved linearity
L10.±0.1%max.linearity
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell•SensingandControl3
Submersible* Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code Available stroke range L X Spring force (oz/in) Typical full scale output
HP ±12,7mm[±0.5in] 203,2mm[8.00in] 38,1mm[1.5in] 4 ±5Vdc
HQ ±25,4mm[±1.0in] 231,14mm[9.10in] 63,5mm[2.5in] 4 ±5Vdc
HR ±50,8mm[±2.0in] 354,33mm[13.95in] 76,2mm[3.0in] 4 ±5Vdc
HS ±76,2mm[±3.0in] 470,41mm[18.52in] 114,3mm[4.5in] 4 ±5Vdc
Wire color Dual power supply
Brown (+)supply,10Vdcto20Vdc
Blue (-)supply,-10Vdcto-20Vdc
Black (-)outputcommon/supplyreturn
White (+)output,±5Vdc(min.2kohmacrossblackandwhite)
Reversepolarityprotectedwithvoltageregulator.Cableshieldisnotconnectedtotransducer.
Wire color Single power supply
Brown (+)supply,20Vdcto40Vdc
Blue Supplyreturn
Black (-)output
White (+)output,±5Vdc(min.20kohmacrossblackandwhite)
Reversepolarityprotectedwithvoltageregulator.Cableshieldisnotconnectedtotransducer.Eitherblackorbluemustfloat.Ifbotharegroundedorconnectedtogether,theunitwillbedestroyed.
For reference only
DC input
GM-A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SensingandControl
AutomationandControlSolutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008754-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model DW7S DC-DC Submersible* Displacement Transducer
Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective.The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
Whileweprovideapplicationassistancepersonally,throughourliteratureandtheHoneywellwebsite,itisuptothecustomertodeterminethesuitabilityoftheproductintheapplication.
Specificationsmaychangewithoutnotice.Theinformationwesupplyisbelievedtobeaccurateandreliableasofthisprinting.However,weassumenoresponsibilityforitsuse.
FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES*Notrecommendedforsaltwateruse.Consultfactoryforsaltwatersubmersibleapplications.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Submersible* Displacement TransducerModel DW7C DC-DC
FEATURES• ±0.25%non-linearity
• Submersible
• Stainlesssteelconstruction
• Easytooperate
• 5m[16ft]submersiblematingconnector(standard)
• ±12,7mmto101,6mmrange[±0.5into±4.0inrange]
• Infiniteresolution
• Singleordualsupplywiring(fieldselectable)
• Reversepolarityprotected
• Captiveguidedarmature
• NotRoHScompliant
DESCRIPTIONModelDW7Csubmersibledisplacementtransducerisoften
idealfordrilling,mining,andhydraulicengineeringapplica-
tionswhichrequireadisplacementtransducerwithastainless
steel,waterproofconstruction.Thismodelmaybeusedasdirect
measuringlineardisplacementdevicesorpositionalfeedback
elementsindynamicsystems.Theyaresuitableforsubmersion
infreshwaterandsomecorrosivefluidsforlongperiods.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2Honeywell•SensingandControl
Model DW7C DC-DC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Strokerange ±12,7mmto101,6mm[±0.5into4in]
Non-linearity(max.) ±0.25%fullscale
Outputsensitivity Seetable
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature,operating -40°Cto70°C[-40°Fto158°F]
Temperatureeffect,zero(max.)
0.005%fullscale/°F
Temperatureeffect,span(max.)
0.015%fullscale/°F
Pressurerating,standard 150psi,upto3000psiwithcableoptions
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Elementtype dc-dcdisplacementtransducer
Inputsupply(acceptable) ±10Vdcto20Vdcunregulated(45mAmax.)or
20Vdcto40Vdcunregulated(45mAmax.)
Electricaltermination Submersiblematingconnectorwith5.03m[16.5ft]cable
MECHANICAL SPECIFICATIONS
Characteristic Measure
Casematerial Stainlesssteel
Probematerial Stainlesssteel
Armaturetype Captiveguided
Probethread M5x0.8in
Springforce(max.) Notapplicable
RANGE CODES
Range Code Available ranges
HP ±12,7mm[±0.5in]
HQ ±25,4mm[±1.0in]
HR ±50,8mm[±2.0in]
HS ±76,2mm[±3.0in]
HT ±101,6mm[±4.0in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±12,7mmto101,6mm[±0.5into4in]
Electrical termination
Submersiblematingconnectorwith5.03m[16.5ft]cableOPT1.Noconnectororcable,terminatedwithsoldierpinsOPT5.Mineralinsulatedweldedstainlesssteelsheathedcable(3mm[0.12in]dia.cable,50m[1ftto164ft]lengthsavailable,-55°Cto200°C[-67°Fto390°F],200bar[3000psi]
Electrical cable orientation
OPT7.Radialoutputsubmersibleconnectorwith5.03m[16.5ft]cable
Improved linearity
L10.±0.1%max.linearity(lessthanorequalto101,6mm[±4.0in]
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell•SensingandControl3
Submersible* Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code Available stroke range L X Weight armature Typical full scale output
HP ±12,7mm[±0.5in] 203,2mm[8.00in] 38,1mm[1.5in] 21,26g[0.75oz] ±5Vdc
HQ ±25,4mm[±1.0in] 231,14mm[9.10in] 63,5mm[2.5in] 28,35g[1.0oz] ±5Vdc
HR ±50,8mm[±2.0in] 354,33mm[13.95in] 76,2mm[3.0in] 42,52g[1.5oz] ±5Vdc
HS ±76,2mm[±3.0in] 470,41mm[18.52in] 114,3mm[4.5in] 85,05g[3.0oz] ±5Vdc
HT ±101,6mm[±4.0in] 502,92mm[19.80in] 127,0mm[5in] 104,89g[3.7oz] ±5Vdc
Wire color Dual power supply
Brown (+)supply,10Vdcto20Vdc
Blue (-)supply,-10Vdcto-20Vdc
Black (-)outputcommon/supplyreturn
White (+)output,±5Vdc(min.2kohmacrossblackandwhite)
Reversepolarityprotectedwithvoltageregulator.Cableshieldisnotconnectedtotransducer.
Wire color Single power supply
Brown (+)supply,20Vdcto40Vdc
Blue Supplyreturn
Black (-)output
White (+)output,±5Vdc(min.20kohmacrossblackandwhite)
Reversepolarityprotectedwithvoltageregulator.Cableshieldisnotconnectedtotransducer.Eitherblackorbluemustfloat.Ifbotharegroundedorconnectedtogether,theunitwillbedestroyed.
For reference only
DC input
GM-A
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SensingandControl
AutomationandControlSolutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008756-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model DW7C DC-DC Submersible* Displacement Transducer
Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective.The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
Whileweprovideapplicationassistancepersonally,throughourliteratureandtheHoneywellwebsite,itisuptothecustomertodeterminethesuitabilityoftheproductintheapplication.
Specificationsmaychangewithoutnotice.Theinformationwesupplyisbelievedtobeaccurateandreliableasofthisprinting.However,weassumenoresponsibilityforitsuse.
FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES*Notrecommendedforsaltwateruse.Consultfactoryforsaltwatersubmersibleapplications.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Submersible* Displacement TransducerModel DW7U DC-DC
FEATURES• ±0.25%non-linearity
• Submersible
• Stainlesssteelconstruction
• Easytooperate
• 5m[16ft]submersiblematingconnector(standard)
• ±12,7mmto101,6mmrange[±0.5into±4.0inrange]
• Infiniteresolution
• Singleordualsupplywiring(fieldselectable)
• Reversepolarityprotected
• Freeunguidedarmature
• NotRoHScompliant
DESCRIPTIONModelDW7Usubmersibledisplacementtransducerisoften
idealfordrilling,mining,andhydraulicengineeringapplica-
tionswhichrequireadisplacementtransducerwithastainless
steel,waterproofconstruction.Thismodelmaybeusedasdirect
measuringlineardisplacementdevicesorpositionalfeedback
elementsindynamicsystems.Theyaresuitableforsubmersion
infreshwaterandsomecorrosivefluidsforlongperiods.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2Honeywell•SensingandControl
Model DW7U DC-DC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Strokerange ±12,7mmto101,6mm[±0.5into4in]
Non-linearity(max.) ±0.25%fullscale
Outputsensitivity Seetable
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature,operating -40°Cto70°C[-40°Fto158°F]
Temperatureeffect,zero(max.)
0.005%fullscale/°F
Temperatureeffect,span(max.)
0.015%fullscale/°F
Pressurerating,standard 150psi,upto3000psiwithcableoptions
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Elementtype dc-dcdisplacementtransducer
Inputsupply(acceptable) ±10Vdcto20Vdcunregulated(45mAmax.)or
20Vdcto40Vdcunregulated(45mAmax.)
Electricaltermination Submersiblematingconnectorwith5.03m[16.5ft]cable
MECHANICAL SPECIFICATIONS
Characteristic Measure
Casematerial Stainlesssteel
Probematerial Stainlesssteel
Armaturetype Freeunguided
Probethread M5x0.8in
Springforce(max.) Notapplicable
RANGE CODES
Range Code Available ranges
HP ±12,7mm[±0.5in]
HQ ±25,4mm[±1.0in]
HR ±50,8mm[±2.0in]
HS ±76,2mm[±3.0in]
HT ±101,6mm[±4.0in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±12,7mmto101,6mm[±0.5into4in]
Electrical termination
Submersiblematingconnectorwith5.03m[16.5ft]cableOPT1.Noconnectororcable,terminatedwithsoldierpinsOPT5.Mineralinsulatedweldedstainlesssteelsheathedcable(3mm[0.12in]dia.cable,50m[1ftto164ft]lengthsavailable,-55°Cto200°C[-67°Fto390°F],200bar[3000psi]
Electrical cable orientation
OPT7.Radialoutputsubmersibleconnectorwith5.03m[16.5ft]cable
Improved linearity
L10.±0.1%max.linearity(lessthanorequalto101,6mm[±4.0in]
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell•SensingandControl3
Submersible* Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code Available stroke range L X Weight armature Typical full scale output
HP ±12,7mm[±0.5in] 203,2mm[8.00in] 38,1mm[1.5in] 21,26g[0.75oz] ±5Vdc
HQ ±25,4mm[±1.0in] 231,14mm[9.10in] 63,5mm[2.5in] 28,35g[1.0oz] ±5Vdc
HR ±50,8mm[±2.0in] 354,33mm[13.95in] 76,2mm[3.0in] 42,52g[1.5oz] ±5Vdc
HS ±76,2mm[±3.0in] 470,41mm[18.52in] 114,3mm[4.5in] 85,05g[3.0oz] ±5Vdc
HT ±101,6mm[±4.0in] 502,92mm[19.80in] 127,0mm[5in] 104,89g[3.7oz] ±5Vdc
Wire color Dual power supply
Brown (+)supply,10Vdcto20Vdc
Blue (-)supply,-10Vdcto-20Vdc
Black (-)outputcommon/supplyreturn
White (+)output,±5Vdc(min.2kohmacrossblackandwhite)
Reversepolarityprotectedwithvoltageregulator.Cableshieldisnotconnectedtotransducer.
For reference only
DC input
GM-A
Wire color Single power supply
Brown (+)supply,20Vdcto40Vdc
Blue Supplyreturn
Black (-)output
White (+)output,±5Vdc(min.20kohmacrossblackandwhite)
Reversepolarityprotectedwithvoltageregulator.Cableshieldisnotconnectedtotransducer.Eitherblackorbluemustfloat.Ifbotharegroundedorconnectedtogether,theunitwillbedestroyed.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SensingandControl
AutomationandControlSolutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008755-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model DW7U DC-DC Submersible* Displacement Transducer
Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective.The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
Whileweprovideapplicationassistancepersonally,throughourliteratureandtheHoneywellwebsite,itisuptothecustomertodeterminethesuitabilityoftheproductintheapplication.
Specificationsmaychangewithoutnotice.Theinformationwesupplyisbelievedtobeaccurateandreliableasofthisprinting.However,weassumenoresponsibilityforitsuse.
FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES*Notrecommendedforsaltwateruse.Consultfactoryforsaltwatersubmersibleapplications.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Submersible* Displacement TransducerModel MS7A AC-AC
DESCRIPTIONModel MS7A submersible displacement transducer is en-
gineered for rugged industrial applications which require a
waterproof transducer. This stainless steel unit is designed with
permanently attached, waterproof connecting cable. Connecting
cables and a waterproof outer jacket are hermetically sealed to
the transducer to allow for submersion in most liquids and cor-
rosive fluids. These models can withstand external pressures to
250 psi.
FEATURES• ±0.25%non-linearity
• Submersible
• Withstands250psi,externalpressure
• Stainlesssteelconstruction
• ±1,02mmto12,7mm[±0.04to±0.50inrange]
• -4°Fto257°Foperatingrange(standard)
• Enhancedimmunitytoelectricalnoise
• Captiveguidedspringreturnarmature
• Hermeticallysealed,waterproofcable1.83m[6ft]
• Easytooperate
• Infiniteresolution
• NotRoHScompliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2Honeywell•SensingandControl
Model MS7A AC-AC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Stroke range ±1,02mmto12,7mm[±0.04into0.50in]
Non-linearity(max.) ±0.25%fullscale
Non-repeatability <10microinches
Output sensitivity 2mV/V/0.001in
Output load 100000ohm
Resolution Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -20°Cto125°C[-4°Fto257°F]
Temperature effect, zero (max.)
0.006%fullscale/°F
Temperature effect, span (max.)
0.006%fullscale/°F
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Elementtype ac-ac displacement transducer
Inputsupply(calibrated) 5VRMS@5kHz
Inputsupply(acceptable) 1Vto7VRMS@2kHzto10kHz
Electricaltermination Hermeticallysealedwaterproofcable1.83m[6ft]
MECHANICAL SPECIFICATIONS
Characteristic Measure
Case material Stainless steel
Probe material Stainless steel
Armature type Freeunguided
Probe thread M3X0.5
RANGE CODES
Range Code Available ranges
HK ±1,02mm[±0.04in]
HM ±2,54mm[±0.10in]
HN ±5,08mm[±0.20in]
HF ±7,62mm[±0.30in]
HG ±10,16mm[±0.40in]
HP ±12,7mm[±0.50in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±1,02mmto12,7mm[±0.04into±0.5in]
Electrical termination
Hermeticallysealedwaterproofcable(1,83m[6ft])
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell•SensingandControl3
Submersible* Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code
Available stroke rangemm [in]
Lmm [in]
Dmm [in]
X **mm [in]
D1mm [in]
Total weight***g [oz]
Armature weightg [oz]
HK ±1,02[±0.04] 40,89[1.61] 8,00[0.315] 16,99[0.669] 2,34[0.092] 25,51[0.90] 3,69[0.13]
HM ±2,54[±0.1] 46,99[1.85] 9,53[0.375] 17,98[0.708] 2,34[0.092] 28,35[1.00] 5,67[0.20]
HN ±5,08[±0.2] 50,29[1.98] 9,53[0.375] 22,86[0.900] 2,34[0.092] 32,60[1.15] 7,09[0.25]
HF ±7,62[±0.3] 69,85[2.75] 9,53[0.375] 29,21[1.150] 2,34[0.092] 45,35[1.60] 9,92[0.35]
HG ±10,16[±0.4] 73,91[2.91] 9,53[0.375] 32,51[1.280] 2,34[0.092] 48,19[1.70] 10,49[0.37]
HP ±12,7[±0.5] 89,91[3.54] 9,53[0.375] 34,93[1.375] 2,34[0.092] 59,53[2.10] 12,76[0.45]
Wire color Supply
Red Supply(calibrated@5VRMS,5kHz)
Yellow Supply return
Blue Output
Green Output return
Black Secondarycentertap(normallynotconnected)
Cable shield is not connected to transducer
For reference only
5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008742-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model MS7A AC-AC Submersible* Displacement Transducer
Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeing free of defective materials and faulty workmanship. Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
Whileweprovideapplicationassistancepersonally,throughourliteratureandtheHoneywellwebsite,itisuptothecustomertodetermine the suitability of the product in the application.
Specificationsmaychangewithoutnotice.Theinformationwesupply is believed to be accurate and reliable as of this printing. However,weassumenoresponsibilityforitsuse.
FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES*Notrecommendedforsaltwateruse**Dimensionsat“X”atnominalelectricalzero***Excludingcable
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Submersible* Displacement TransducerModel S7C AC-AC
DESCRIPTIONModel S7C ac-ac submersible displacement transducer is
engineered for rugged industrial applications which require a
waterproof transducer. This stainless steel unit is designed with
permanently attached, waterproof connecting cable. Connecting
cables and a waterproof outer jacket are hermetically sealed to
the transducer to allow for submersion in most liquids and cor-
rosive fluids. These models can withstand external pressures to
250 psi.
FEATURES• ±0.25%non-linearity
• Submersible
• Withstands250psi,externalpressure
• Stainlesssteelconstruction
• ±1,02mmto12,7mm[±0.04to±0.50inrange]
• -4°Fto257°Foperatingrange(standard)
• Enhancedimmunitytoelectricalnoise
• Captiveguidedspringreturnarmature
• Hermeticallysealed,waterproofcable1.83m[6ft]
• Easytooperate
• Infiniteresolution
• NotRoHScompliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2Honeywell•SensingandControl
Model S7C AC-AC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Stroke range ±1,02mmto12,7mm[±0.04into0.50in]
Non-linearity(max.) ±0.25%fullscale
Non-repeatability <10microinches
Output sensitivity 2mV/V/0.001in
Output load 100000ohm
Resolution Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -20°Cto125°C[-4°Fto257°F]
Temperature effect, zero (max.)
0.006%fullscale/°F
Temperature effect, span (max.)
0.006%fullscale/°F
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Elementtype ac-ac displacement transducer
Inputsupply(calibrated) 5VRMS@5kHz
Inputsupply(acceptable) 1Vto7VRMS@2kHzto10kHz
Electricaltermination Hermeticallysealedwaterproofcable1.83m[6ft]
MECHANICAL SPECIFICATIONS
Characteristic Measure
Case material Stainless steel
Probe material Stainless steel
Armature type Captive guided spring return
Probe thread Notapplicable
RANGE CODES
Range Code Available ranges
HK ±1,02mm[±0.04in]
HM ±2,54mm[±0.10in]
HN ±5,08mm[±0.20in]
HF ±7,62mm[±0.30in]
HG ±10,16mm[±0.40in]
HP ±12,7mm[±0.50in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±1,02mmto12,7mm[±0.04into±0.5in]
Electrical termination
Hermeticallysealedwaterproofcable(1,83m[6ft])
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell•SensingandControl3
Submersible* Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code Available stroke range
L D X ** Total weight*** Max. spring force
HK ±1,02mm[±0.04in]
50,8mm[2.00in]
8,00mm[0.315in]
11,43mm[0.45in]
51,03g[1.8oz]
21,62g[7.5oz]
HM ±2,54mm[±0.1in]
64,01mm[2.52in]
9,53mm[0.375in]
11.68mm[0.46in]
82,21g[2.9oz]
141,75g[5.0oz]
HN ±5,08mm[±0.2in]
69,85mm[2.75in]
9,53mm[0.375in]
12,19mm[0.48in]
82,21g[2.9oz]
141,75g[5.0oz]
HF ±7,62mm[±0.3in]
95,25 mm[3.75in]
9,53mm[0.375in]
18,23mm[0.72in]
110,56[3.9oz]
141,75g[5.0oz]
HG ±10,16mm[±0.4in]
106,43mm[4.19in]
9,53mm[0.375in]
22,1mm[0.87in]
124,74g[4.4oz]
141,75g[5.0oz]
HP ±12,7mm[±0.5in]
129,03mm[5.08in]
9,53mm[0.375in]
24,64mm[0.97in]
153,09g[5.4oz]
141,75g[5.0oz]
Wire color Supply
Red Supply(calibrated@5VRMS,5kHz)
Yellow Supply return
Blue Output
Green Output return
Black Secondarycentertap(normallynotconnected)
For reference only
5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008741-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model S7C AC-AC Submersible* Displacement Transducer
Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeing free of defective materials and faulty workmanship. Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
Whileweprovideapplicationassistancepersonally,throughourliteratureandtheHoneywellwebsite,itisuptothecustomertodetermine the suitability of the product in the application.
Specificationsmaychangewithoutnotice.Theinformationwesupply is believed to be accurate and reliable as of this printing. However,weassumenoresponsibilityforitsuse.
FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES*Notrecommendedforsaltwateruse**Dimensionsat“X”atnominalelectricalzero***Excludingcable
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sub-Sea Displacement TransducerModel SSA AC-AC
DESCRIPTIONModel SSA ac-ac displacement transducer is offered in ranges
from ±0.5 in up to ±4.0 in stroke length. The oceanographic type
of electrical plug allows the connection to be made underwater.
This Sub-Sea displacement sensor are pressure rated to operate
down to a depth of 7500 feet in sea water. The body of the sen-
sor is made from 316 SS with all-welded construction. Honeywell
offers in-line amplifiers and digital indicators for both LVDT mod-
els that provide ±5 Vdc, 10 Vdc or 4 mA to 20 mA and RS232
outputs with zero and span adjustments.
FEATURES• ±1.0%non-linearity
• Submersible
• Allwelded316stainlesssteelconstruction
• Easytooperate
• Enhancedimmunitytoelectricalnoise
• Upto2286m[7500ft]depth
• ±12,7mmto101,6mmrange[±0.5into±4.0inrange]
• Infiniteresolution
• NotRoHScompliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2Honeywell•SensingandControl
Model SSA AC-AC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Stroke range ±12,7mmto101,6mm[±0.5into4.0in]
Non-linearity(max.) ±1.0%fullscale
Output sensitivity Consultfactory;0.3VRMSto3.0VRMSrange dependent
Resolution Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -40°Cto50°C[-40°Fto122°F]
Temperature effect, zero (max.)
0.005%fullscale/°F
Temperature effect, span (max.)
0.005%fullscale/°F
Operating pressure 3500 psi
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Elementtype ac-ac displacement transducer
Inputsupply(acceptable) 0.5 V RMS to 7 V RMS @ 5 kHz
Ripple Notapplicable
Electricaltermination Includessubmersible,neoprene,andnickel-aluminum bronze connector moldedto1.83m[6ft]ofneoprenejacketed10,16mm[0.40in]diametercable. The electrical connector may be mated under water up to 500 psi or335,28m[1100ft].Longercablelengths are available up to 990,6 m [3250ft].Consultfactoryforinformation.
MECHANICAL SPECIFICATIONS
Characteristic Measure
Casematerial 316 Stainless steel with all welded construction
Probe material 316 Stainless steel with all welded construction
Probe thread M10x1.5
RANGE CODES
Range Code Available ranges
HP ±12,7mm[±0.5in]
HQ ±25,4mm[±1.0in]
HR ±50,8mm[±2.0in]
HS ±76,2mm[±3.0in]
HT ±101,6mm[±4.0in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±12,7mmto101,6mm[±0.5into4in]
Electrical termination
Submersible, neoprene and nickel-aluminum bronzeconnectormoldedto1.83m[6.0ft]ofneoprene jacketed cable
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell•SensingandControl3
Sub-Sea Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code Available stroke range
L X D1 D2 A B
HP ±12,7 mm [±0.5in]
223,52 mm [8.8in]
53,34 mm [2.1in]
38,1mm[1.5in]
9,91 mm[0.39in]
91,44 mm [3.6in]
30,48mm[1.2in]
HQ ±25,4 mm [±1.0in]
251,46 mm [9.9in]
66,04 mm [2.6in]
38,1mm[1.5in]
9,91 mm [0.39in]
91,44 mm [3.6in]
30,48mm[1.2in]
HR ±50,8mm[±2.0in]
345,44 mm [13.6in]
91,44 mm [3.6in]
38,1mm[1.5in]
9,91 mm [0.39in]
91,44 mm [3.6in]
30,48mm[1.2in]
HS ±76,2 mm [±3.0in]
434,34 mm [17.1in]
116,84mm[4.6in]
38,1mm[1.5in]
9,91 mm [0.39in]
91,44 mm [3.6in]
30,48mm[1.2in]
HT ±101,6 mm [±4.0in]
535,94 mm [21.1in]
142,24 mm [5.6in]
38,1mm[1.5in]
9,91 mm [0.39in]
91,44 mm [3.6in]
30,48mm[1.2in]
Wire color Dual power supply
Black Excitationhigh
White Excitationlow
Red Signal high
Green Signal low
For reference only
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SensingandControl
AutomationandControlSolutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008746-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model SSA AC-AC Sub-Sea Displacement Transducer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed tootherwisebyHoneywellinwriting;pleaserefertoyourorder acknowledgement or consult your local sales office for specificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sub-Sea Displacement TransducerModel SSD DC-DC
FEATURES• ±1.0%non-linearity
• Submersible
• Allwelded316stainlesssteelconstruction
• Easytooperate
• Upto2286m[7500ft]depth
• ±12,7mmto101,6mmrange[±0.5into±4.0inrange]
• Infiniteresolution
• Singleordualsupplywiring(fieldselectable)
• Reversepolarityprotected
• NotRoHScompliant
DESCRIPTIONModelSSDdc-dcdisplacementtransducerisofferedinranges
from±0.5inupto±4.0instrokelength.Theoceanographictype
ofelectricalplugallowstheconnectiontobemadeunderwater.
ThisSub-Seadisplacementsensorispressureratedtooperate
downtoadepthof7500feetinseawater.Thebodyofthesen-
sorismadefrom316SSwithall-weldedconstruction.Honeywell
offersin-lineamplifiersanddigitalindicatorsthatprovide±5
Vdc,10Vdcor4mAto20mAandRS-232outputswithzeroand
spanadjustments.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2Honeywell•SensingandControl
Model SSD DC-DC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Strokerange ±12,7mmto101,6mm[±0.5into4in]
Non-linearity(max.) ±1.0%fullscale
Outputsensitivity ±5Vdc
Resolution Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature,operating -40°Cto50°C[-40°Fto122°F](Note:-9°Cto60°C[15°Fto140°F]on4mAto20mA)
Temperatureeffect,zero(max.)
0.005%fullscale/°F
Temperatureeffect,span(max.)
0.015%fullscale/°F
Operatingpressure 3500psi
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Elementtype dc-dcdisplacementtransducer
Inputsupply(acceptable)Singlefloatingsupply
20Vdcto40Vdc@25mA
Inputsupply(acceptable)Dualsupply
±10Vdcto20Vdc@25mA
Ripple 30mVpeaktopeak
Electricaltermination Includessubmersible,neoprene,andnickel-aluminumbronzeconnectormoldedto1.83m[6ft]ofneoprenejacketed10,2mm[0.40in]diametercable.Theelectricalconnectormaybematedunderwaterupto500psior335,28m[1100ft].Longercablelengthsareavailableupto990,6m[3250ft].Consultfactoryforinformation.
MECHANICAL SPECIFICATIONS
Characteristic Measure
Casematerial 316stainlesssteelwithallweldedconstruction
Probematerial 316stainlesssteelwithallweldedconstruction
Probethread M10x1.5
RANGE CODES
Range Code Available ranges
HP ±12,7mm[±0.5in]
HQ ±25,4mm[±1.0in]
HR ±50,8mm[±2.0in]
HS ±76,2mm[±3.0in]
HT ±101,6mm[±4.0in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±12,7mmto101,6mm[±0.5into4in]
Electrical termination
Submersible,neopreneandnickel-aluminumbronzeconnectormoldedto1.83m[6ft]ofneoprenejacketedcable
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell•SensingandControl3
Sub-Sea Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code Available stroke range L X D1 D2 A B
HP ±12,7mm[±0.5in] 223,52mm[8.8in]
53,34mm[2.1in]
38,1mm[1.5in]
9,91mm[0.39in]
91,44mm[3.6in]
30,48mm[1.2in]
HQ ±25,4mm[±1.0in] 251,46mm[9.9in]
66,04mm[2.6in]
38,1mm[1.5in]
9,91mm[0.39in]
91,44mm[3.6in]
30,48mm[1.2in]
HR ±50,8mm[±2.0in] 345,44mm[13.6in]
91,44mm[3.6in]
38,1mm[1.5in]
9,91mm[0.39in]
91,44mm[3.6in]
30,48mm[1.2in]
HS ±76,2mm[±3.0in] 434,34mm[17.1in]
116,84mm[4.6in]
38,1mm[1.5in]
9,91mm[0.39in]
91,44mm[3.6in]
30,48mm[1.2in]
HT ±101,6mm[±4.0in] 535,94mm[21.1in]
142,24mm[5.6in]
38,1mm[1.5in]
9,91mm[0.39in]
91,44mm[3.6in]
30,48mm[1.2in]
Wire color or pin Single supply* designation
Dual supply designation
RedorA 20Vto40V 10Vto20V
GreenorB Supplycommon -10Vto-20V
BlackorC Outputcommon** 0Vcommon
WhiteorD Output Output
*Supplymustbefullyfloating**OutputcommonfloatsatVsupply/2Min2000ohmswithdualsupply,20000ohmswithsinglesupply
For reference only
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
SensingandControl
AutomationandControlSolutions
Honeywell
1985DouglasDriveNorth
GoldenValley,MN55422USA
+1-815-235-6847
www.honeywell.com/sensing
008747-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model SSD DC-DC Sub-Sea Displacement Transducer
Warranty. Honeywellwarrantsgoodsofitsmanufactureasbeingfreeofdefectivematerialsandfaultyworkmanship.Honeywell’sstandardproductwarrantyappliesunlessagreedtootherwisebyHoneywellinwriting;pleaserefertoyourorderacknowledgementorconsultyourlocalsalesofficeforspecificwarrantydetails.IfwarrantedgoodsarereturnedtoHoneywellduringtheperiodofcoverage,Honeywellwillrepairorreplace,atitsoption,withoutchargethoseitemsitfindsdefective.The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
Whileweprovideapplicationassistancepersonally,throughourliteratureandtheHoneywellwebsite,itisuptothecustomertodeterminethesuitabilityoftheproductintheapplication.
Specificationsmaychangewithoutnotice.Theinformationwesupplyisbelievedtobeaccurateandreliableasofthisprinting.However,weassumenoresponsibilityforitsuse.
FormoreinformationaboutSensingandControlproducts,visitwww.honeywell.com/sensingorcall+1-815-235-6847Emailinquiriestoinfo.sc@honeywell.com
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES1.GM-Ashouldnotbeusedwithanamplifieddisplacementtransducer
unlessusinganexternalpowersupplytopowerthedisplacementtransducer.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Miniature Displacement TransducerModel MS3 DC-DC
DESCRIPTIONModel MS3 (free unguided armature) dc-dc miniature displace-
ment transducer is ideally suited for multi-point applications
with space constraints and provide a cost-effective alternative
to larger, more expensive units. This model is compatible with
dc data logging equipment used for taking readings from strain
gages or other dc operated transducers.
FEATURES• Miniature design
• Cost efficient
• 0.25 % non-linearity
• Stainless steel construction
• ±0.1 in to ±0.4 in range
• Infinite resolution
• Single or dual supply wiring (field selectable)
• Free unguided armature
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Model MS3 DC-DC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Stroke range ±2,54 mm to 10,16 mm [±0.1 in to 0.4 in]
Non-linearity (max.) ±0.25 % full scale
Output impedance 2 ohm
Output load (min.) 2000 ohm
Output sensitivity ±5 Vdc or 0 Vdc to 10 Vdc (field se-lectable)
Resolution Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -50 °C to 70 °C [-58 °F to 158 °F]
Temperature effect, zero (max.)
0.006 % full scale/°F
Temperature effect, span (max.)
0.017 % full scale/°F
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Element type dc-dc displacement transducer
Power supply, single 24 Vdc to 40 Vdc @ 30 mA
Power supply, dual ±12 Vdc to ±20 Vdc @ 30 mA
Electrical termination Multiconductor shielded cable (1.83 m [6 ft])
MECHANICAL SPECIFICATIONS
Characteristic Measure
Case material Stainless steel
Probe material Stainless steel
Armature type Free unguided
Probe thread M3 x 0.5
Weight 73,5 g [2.6 oz]
RANGE CODES
Range Code Available ranges
HM ±2,54 mm [±0.1 in]
HN ±5,08 mm [±0.2 in]
HF ±7,62 mm [±0.3 in]
HG ±10,16 mm [±0.4 in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±25,4 mm to 101,6 mm [±0.1 in to 4 in]
Electrical termination
Multiconductor shielded cable (1.83 m [6 ft])6a. Bendix PTIH-10-6P right angle Bendix
Electrical cableorientation
Ra. Right angle
Mounting threads
13a. 1/2-20 UNF13f. 3/8-32 UNF
Improved linearity
L10. 0.1 % on some models
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell • Sensing and Control 3
Miniature Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Wire color Dual supply Single supply (floating)*
Outputs
Red 12 V to 20 V input
24 V to 40 V input
Blue -12 V to -20 V input
Supply negative
Black OV, I/P, O/P com-mon
Yellow 0 V to 10 V
Green ±5 Vdc
* Output common floats at voltage source/2
For reference only
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008758-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model MS3 DC-DC Miniature Displacement Transducer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
NOTES1. GM-A should not be used with an amplified displacement transducer
unless using an external power supply to power the displacement transducer.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Miniature Displacement TransducerModel S3C DC-DC
DESCRIPTIONModel S3C (captive guided spring return armature) dc-dc min-
iature displacement transducer is ideally suited for multi-point
applications with space constraints and provide a cost-effective
alternative to larger, more expensive units. This model is com-
patible with dc data logging equipment used for taking readings
from strain gages or other dc operated transducers.
FEATURES• Miniature design
• Cost efficient
• 0.25 % non-linearity
• Stainless steel construction
• ±0.1 in to ±0.4 in range
• Infinite resolution
• Single or dual supply wiring (field selectable)
• Captive guided spring return armature
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Model S3C DC-DC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Stroke range ±2,54 mm to 10,16 mm [±0.1 in to 0.4 in]
Non-linearity (max.) ±0.25 % full scale
Output impedance 2 ohm
Output load (min.) 2000 ohm
Output sensitivity ±5 Vdc or 0 Vdc to 10 Vdc (field se-lectable)
Resolution Infinite
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -50 °C to 70 °C [-58 °F to 158 °F]
Temperature effect, zero (max.)
0.006 % full scale/°F
Temperature effect, span (max.)
0.017 % full scale/°F
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Element type dc-dc displacement transducer
Power supply, single 24 Vdc to 40 Vdc @ 30 mA
Power supply, dual ±12 Vdc to ±20 Vdc @ 30 mA
Electrical termination Multiconductor shielded cable (1.83 m [6 ft])
MECHANICAL SPECIFICATIONS
Characteristic Measure
Case material Stainless steel
Probe material Stainless steel
Armature type Captive guided spring return
Probe thread Not applicable
Weight 82,5 g [2.91 oz]
RANGE CODES
Range Code Available ranges
HM ±2,54 mm [±0.1 in]
HN ±5,08 mm [±0.2 in]
HF ±7,62 mm [±0.3 in]
HG ±10,16 mm [±0.4 in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±5,08 mm [±0.2 in], ±2,54 mm [±0.1 in], ±7,62 mm [±0.3 in], ±10,16 mm [±0.4 in]
Electricaltermination
Multiconductor shielded cable (1.83 m [6 ft])6a. Bendix PTIH-10-6P right angle Bendix
Electrical cableorientation
Ra. Right angle
Mountingthreads
13a. 1/2-20 UNF13f. 3/8-32 UNF
Improved linearity
L10. 0.1 % on some models
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell • Sensing and Control 3
Miniature Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Wire color Dual supply Single supply (floating)*
Outputs
Red 12 V to 20 V input
24 V to 40 V input
–
Blue -12 V to -20 V input
Supply negative –
Black OV, I/P, O/P com-mon
– –
Yellow – – 0 V to 10 V
Green – – ±5 Vdc
* Output common floats at voltage source/2
For reference only
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
008757-2-EN IL50 GLO September 2009Copyright © 2009 Honeywell International Inc. All rights reserved.
Model S3C DC-DC Miniature Displacement Transducer
Sensing and Control
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
www.honeywell.com
NOTES1. GM-A should not be used with an amplified displacement transducer
unless using an external power supply to power the displacement transducer.
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
WARNINGPERSONAL INJURY
•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION
•Theinformationpresentedinthisdatasheetisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
Find out more
Honeywell serves its customers
through a worldwide network of
sales offices, representatives
and distributors. For application
assistance, current specifica-
tions, pricing or name of the
nearest Authorized Distributor,
contact your local sales office.
To learn more about Honeywell’s
test and measurement products,
call +1-614-850-5000, visit
www.honeywell.com/sensotec,
or e-mail inquiries to
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Miniature Displacement TransducerModel M-5C AC-AC
DESCRIPTIONModel M-5C ac-ac miniature displacement transducers are
rugged, stable, and compact transducers, which provide high
accuracy static and dynamic displacement measurement.
These units are easily mounted in any position, at remote or
hazardous locations where direct measurement would not be
practical. High electrical output, exceptional linearity and
infinite resolution enable these units to be effective in a variety of
applications. M-5C has a free unguided armature, which may be
mounted to be virtually friction-free. The displacement transduc-
er’s body and armature are separable.
FEATURES• Miniature design
• Rugged, enhanced accuracy
• Enhanced immunity to electrical noise
• ±0.025 in to ±0.5 in range
• -58 °F to 257 °F operating range (standard)
• Extended life cycle
• Infinite resolution
• Free unguided armature
• Not RoHS compliant
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
2 Honeywell • Sensing and Control
Model M-5C AC-AC
PERFORMANCE SPECIFICATIONS
Characteristic Measure
Stroke range ±2,54 mm to 12,7 mm [±0.10 in to 0.50 in]
Non-linearity (max.) ±0.25 % full scale
Non-repeatability Not measureable
Output sensitivity See table
Output load (min.) 100 ohm
Resolution Infinite
Phase shift <10° @ 5 kHz
ENVIRONMENTAL SPECIFICATIONS
Characteristic Measure
Temperature, operating -20 °C to 125 °C [-4 °F to 257 °F]
Temperature effect, zero (max.)
0.006 % full scale/°F
Temperature effect, span (max.)
0.006 % full scale/°F
ELECTRICAL SPECIFICATIONS
Characteristic Measure
Element type ac-ac displacement transducer
Input supply (calibrated) 5 V RMS @ 5 kHz
Input supply (acceptable) 1 V to 7 V RMS @ 2 kHz to 10 kHz
Electrical termination Multiconductor shielded cable 1.83 m [6 ft]
MECHANICAL SPECIFICATIONS
Characteristic Measure
Case material Stainless steel
Probe material Stainless steel
Armature type Free unguided
Probe thread M3 x 0.5
Weight See table
RANGE CODES
Range Code Available ranges
HM ±2,54 mm [±0.10 in]
HN ±5,08 mm [±0.20 in]
HF ±7,62 mm [±0.30 in]
HG ±10,16 mm [±0.40 in]
HP ±12,7 mm [±0.50 in]
OPTION CODES
Range Code Many range/option combinations are available in our quick-ship and fast-track manufacture pro-grams. Please see http://sensing.honeywell.com/TMsensor-ship for updated listings.
Stroke ranges ±2,54 mm to 12,7 mm [±0.1 in to ±0.5 in]
Electrical termination
Multiconductor shielded cable (1,83 m [6 ft])
Electrical cableorientation
Ra. Right angle cable exit
Mountingthreads
13g. 1/8 in BSP
Improved linearity
L10. ±0.1 % max. linearity (less than or equal to 101,6 mm [±4.0 in]
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Honeywell • Sensing and Control 3
Miniature Displacement Transducer
MOUNTING DIMENSIONS
TYPICAL SYSTEM DIAGRAM
WIRING CODES
Range code
Available stroke range
Lmm [in]
Xmm [in]
Dmm [in]
D1mm [in]
Tmm [in]
Total weightg [oz]
Armature weightg [oz]
Output sensitivitymV/V/ 0.001 in
HJ ±0,635 [±0.025] 35,05 [1.38] 27,94 [1.1] 9,53 [0.375] 1,91 [0.075] 19,05 [0.75] 14,17 [0.5] 1,28 [0.045] 2
HM ±2,54 [±0.1] 42,93 [1.69] 19,05 [0.75] 9,53 [0.375] 2,29 [0.09] 14,99 [0.59] 15,88 [0.56] 1,41 [0.05] 4
HN ±5,08 [±0.2] 55,88 [2.2*] 25,4 [1.0] 9,53 [0.375] 2,03 [0.08] 18,03 [0.71] 17,86 [0.63] 1,98 [0.07] 4*
HF ±7,62 [±0.3] 57,91 [2.28] 29,97 [1.18] 9,53 [0.375] 2,03 [0.08] 18,03 [0.71] 22,11 [0.78] 2,21 [0.078] 2
HG ±10,16 [±0.4] 63 [2.48] 32,51 [1.28] 9,53 [0.375] 2,03 [0.08] 18,03 [0.71] 28,07 [0.99] 1,9 [0.067] 2
HP ±12,7 [±0.5] 79 [3.11] 34,8 [1.37] 9,53 [0.375] 2,03 [0.08] 18,03 [0.71] 36,0 [1.27] 2,3 [0.081] 2
Wire color Supply
Red (+) supply (calibrated @ 5 V RMS, 5 kHz)
Yellow Supply return
Blue Output
Green Output return
Black Secondary center tap (normally not connected)
Cable shield is not connected to transducerFor reference only
5
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Sensing and Control
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 USA
+1-815-235-6847
www.honeywell.com/sensing
008750-1-EN IL50 GLO May 2008Copyright © 2008 Honeywell International Inc. All rights reserved.
Model M-5C AC-AC Miniature Displacement Transducer
Warranty. Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages.
While we provide application assistance personally, through our literature and the Honeywell web site, it is up to the customer to determine the suitability of the product in the application.
Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
For more information about Sensing and Control products, visit www.honeywell.com/sensing or call +1-815-235-6847Email inquiries to [email protected]
WARNINGPERSONAL INJURY•DONOTUSEtheseproductsassafetyoremergencystopdevicesorinanyotherapplicationwherefailureoftheproductcouldresultinpersonalinjury.
Failure to comply with these instructions could result in death or serious injury.
WARNINGMISUSE OF DOCUMENTATION•Theinformationpresentedinthiscatalogueisforreferenceonly.DONOTUSEthisdocumentasproductinstallationinformation.•Completeinstallation,operationandmaintenanceinformationisprovidedintheinstructionssuppliedwitheachproduct.
Failure to comply with these instructions could result in death or serious injury.
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com