model no: irs-sw8 description: 8-channel high-voltage...

2
Model No: IRS-SW8 Description: 8-Channel High-Voltage Switch The IRS-SW8 is an 8-channel power control module which to support ON/OFF switching for non-dimmable lighting and sockets. A single model supports from 100 to 240 Volts AC applications. Each channel handles the loading up to 12 Amps. Product Specification Loading Rating Switch channels: 8 Module total loading: 96A, 100-240V AC, 50/60HZ Maximum per channel: 12A, 100-240V AC, 50/60Hz Relay capacitive loading: < 50uF Relay life/ Endurance: >60,000 press Load types Incandescent, neon/ cold cathode, fluorescent or other lighting/ curtain device that need switch control Connection CH 1-8: (8) 2-pin 5mm detachable terminal blocks Net: (2) 4-pin 3.5mm detachable terminal blocks Indicators Channel 1-8: (8) Red LEDs for status indication TX/RX: (2) Blue LEDs indicate data throw to/from other modules on the same bus RUN (1) Green LED flashing when device operated normally OVR (1) Red LED for override mode indication Control NET ID: (1) 8 Digital physical address switch for setting RoomNet ID OVR: (1) Recessed miniature pushbutton, enable override mode, device will bypass program to provide power for all channels directly RESET Recessed miniature pushbutton, reset the module Power Requirements RoomNet power usage: 1.2Watts (50 mAmps@24 Volts DC)

Upload: others

Post on 19-May-2020

8 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Model No: IRS-SW8 Description: 8-Channel High-Voltage Switchmtc-technologies.com/wp-content/uploads/2017/05/IRS-SW8-Product... · Model No: IRS-SW8 Description: 8-Channel High-Voltage

Model No: IRS-SW8Description: 8-Channel High-Voltage Switch

The IRS-SW8 is an 8-channel power control module which to support ON/OFF switching for non-dimmable

lighting and sockets. A single model supports from 100 to 240 Volts AC applications. Each channel handles

the loading up to 12 Amps.

Product SpecificationLoading RatingSwitch channels: 8

Module total loading: 96A, 100-240V AC, 50/60HZ

Maximum per channel: 12A, 100-240V AC, 50/60Hz

Relay capacitive loading: < 50uF

Relay life/ Endurance: >60,000 press

Load types Incandescent, neon/ cold cathode, fluorescent or other lighting/ curtain

device that need switch control

ConnectionCH 1-8: (8) 2-pin 5mm detachable terminal blocks

Net: (2) 4-pin 3.5mm detachable terminal blocks

Indicators

Channel 1-8: (8) Red LEDs for status indication

TX/RX: (2) Blue LEDs indicate data throw to/from other modules on the same bus

RUN (1) Green LED flashing when device operated normally

OVR (1) Red LED for override mode indication

Control

NET ID: (1) 8 Digital physical address switch for setting RoomNet ID

OVR: (1) Recessed miniature pushbutton, enable override mode, device will

bypass program to provide power for all channels directly

RESET Recessed miniature pushbutton, reset the module

Power RequirementsRoomNet power usage: 1.2Watts (50 mAmps@24 Volts DC)

Page 2: Model No: IRS-SW8 Description: 8-Channel High-Voltage Switchmtc-technologies.com/wp-content/uploads/2017/05/IRS-SW8-Product... · Model No: IRS-SW8 Description: 8-Channel High-Voltage

EnclosureLight gray polycarbonate housing with polycarbonate label overlay, UL94 V-0, 35mm DIN EN 60715 rail

mounted, DIN 43880 form factor of enclosure with 45 mm front panel cutout, occupies 4 DIN module

space (72 mm)

EnvironmentalOperation temperature: 0°C - 45°C

Operation humidity: 20% - 90%

DimensionHeight: 90 mm

Width: 144 mm

Depth: 58 mm

Weight: 320 g

Features

IRS-SW8

www.mtc-technologies.com [email protected]