model ft25 - inferno manufacturing
TRANSCRIPT
Union Nut / Packing Nut
Union Bonnet
Female Gage ConnectionFlat Union:
1/2" or 3/4" F-NPT
Vessel ConnectionUnion:Flat Floating Union - StdSpherical Union - Opt1/2" or 3/4" M-NPT
Vent / DrainRigid:1/2" F-NPT- Std3/4" F-NPT- Opt
RH
4.5
3.2
4.8Max
3.0
2.75
4.5
q qVesselConnection
GageConnection
Cleaning brush bypasses stem in closed position3/4" Offset
End Connected
RH
LH
Brush access
RH
LH
1/15/21
T (318) 221-8454 F (318) 222-4106
115 Ricou St. Shreveport, LA USA 71107
1/1
0
Model FT25Drawing No:
Drawing Date:
Revision:
Rev Date:
© 2021 Inferno Mfg [email protected] Sheet:
Reference Documents
N/A
Inferno Manufacturing Corporation
FT "Free Turn" Patent 6,991,216
Model FT25Double Union, Offset Pattern Gage Valve
Male x FemaleFor use with End Connected Gages (or Close Hook-up "CH")
RH shown
* Unique design - Stem packing located below the threads, isolates valve workings from salt water and H2S
* NACE MR-0175 conformance (wetted only)
* Valve set consists of RH and LH valve
4000 PSI @ 100_F
Weight per Set: 15.25 Lbs
Close Hook-up "CH"
Fig. 5-3-R shown
"Offsets Inside"
Fig. 4-1 shown
For other configurations see GA.ASSY1
FT "Free Turn" Advantages
GA.ASSY1
Gage / Valve Connections: End Connected
Gage / Valve Connections: Close Hook-Up "CH"