model es90-ii vsp - hydropool.com

1
8125 Bayberry Road, Jacksonville, Florida 32256 USA | Phone: (904) 739-2626 | Fax: (904) 737-5261 Website: www.speck-pumps.com Rev. 11/2017 11.8" 7.3" 16.7" 16.3" 11.9" 7.7" 6.5" 5.1" 0.4" 3.9" 0.3" 23.5” 14.0" 0 10 20 30 40 50 60 70 80 Total Head in Feet U.S. Gallons Per Minute 1000 Watts (2650-3250 RPM) 100 Watts (1150-1400 RPM) B A C 450 Watts (2000-2450 RPM) 20 40 60 80 100 120 140 MODEL ES90-II VSP Model ES90-II VSP l This high performance, medium head pump comes complete with an industry standard Carbon/Ceramic 5/8” mechanical seal for convenient replacement. l Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 150°F. l Equipped with quick disconnect unions for easy installation and maintenance. Comes standard with 2” suction and 1.5”/2” discharge. l For pool users’ safety, the impeller has a dielectric shaft sleeve that provides absolute separation between pool water and electric parts. l Lock ring that incorporates handles. These handles provide the user with a convenient way to easily remove the lid. l ALL NEW: Clear lid with LED light, allowing the user to check the basket for debris. l Reusable o-rings throughout. l The Model ES90 comes complete with a full 12 month warranty. l Every pump is performance tested before leaving the Speck factory. Features Specific to the 1.1 THP Dual Voltage Motor l Pump is equipped with a 1.1 THP (48 frame thru-bolt mount) Variable Speed Motor. l Motor runs on a wide voltage range 100-130/200-250V (without switching). l Built-In Controller, LED Screen & Keypad can be locked for safety. l 3 Adjustable Power Levels - Levels can be set to range from 50 Watts/1000 RPM to 1000 Watts/3500 RPM (in increments of 10 Watts). l Programmable high efficiency TEFC (totally enclosed fan cooled) maintenance free permanent magnet brushless 48 frame motor. Applications l In-ground pools (small to medium) l Residential pools Performance Curves Trademarks and Certifications Features Dimensional Drawing Order # Model # Motor/Frame Speed List Price THP Volts $ IG155-V100T-000 ES90-II VSP 1.1 115-230 TEFC/48 single 962.00 Technical Data Dual Voltage Variable Speed Pool Pump B, A, and C represent average system curves for pools with the pipe diameter mentioned below. B = 1.5” pipe A = 2.0” pipe C = 2.5” pipe

Upload: others

Post on 22-May-2022

3 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: MODEL ES90-II VSP - Hydropool.com

8125 Bayberry Road, Jacksonville, Florida 32256 USA | Phone: (904) 739-2626 | Fax: (904) 737-5261Website: www.speck-pumps.com Rev. 11/2017

11.8"

7.3

"

16.7"

16.3"

11

.9"

7.7"

6.5"

5.1"

0.4"

3.9

"

0.3"

23.5”

14

.0"

0

10

20

30

40

50

60

70

80

Tota

l Hea

d in

Fee

t

U.S. Gallons Per Minute

1000 Watts(2650-3250 RPM)

100 Watts(1150-1400 RPM)

B A C

450 Watts(2000-2450 RPM)

20 40 60 80 100 120 140

B, A, and C represent average system curves for pools with the pipe diameter mentioned below.

B = 1.5” Pipe A = 2” Pipe C = 2.5” Pipe

MODEL ES90-II VSP

Model ES90-II VSP

l This high performance, medium head pump comes complete with an industry standard Carbon/Ceramic 5/8” mechanical seal for convenient replacement.l Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 150°F.l Equipped with quick disconnect unions for easy installation and maintenance. Comes standard with 2” suction and 1.5”/2” discharge.l For pool users’ safety, the impeller has a dielectric shaft sleeve that provides absolute separation between pool water and electric parts.l Lock ring that incorporates handles. These handles provide the user with a convenient way to easily remove the lid.l ALL NEW: Clear lid with LED light, allowing the user to check the basket for debris. l Reusable o-rings throughout.l The Model ES90 comes complete with a full 12 month warranty.l Every pump is performance tested before leaving the Speck factory.

Features Specific to the 1.1 THP Dual Voltage Motorl Pump is equipped with a 1.1 THP (48 frame thru-bolt mount) Variable Speed Motor. l Motor runs on a wide voltage range 100-130/200-250V (without switching).l Built-In Controller, LED Screen & Keypad can be locked for safety.l 3 Adjustable Power Levels - Levels can be set to range from 50 Watts/1000 RPM to 1000 Watts/3500 RPM (in increments of 10 Watts).l Programmable high efficiency TEFC (totally enclosed fan cooled) maintenance free permanent magnet brushless 48 frame motor.

Applicationsl In-ground pools (small to medium)

l Residential pools

Performance Curves

Trademarks and Certifications

Features

Dimensional Drawing

Order # Model # Motor/Frame Speed List PriceTHP Volts

$IG155-V100T-000 ES90-II VSP 1.1 115-230 TEFC/48 single 962.00

Technical Data

Dual Voltage Variable Speed Pool Pump

B, A, and C represent average system curves for pools with the pipe diameter mentioned below.

B = 1.5” pipe A = 2.0” pipe C = 2.5” pipe