MOD™

X

MOD™

XLitecontrol developed the original architectural slots more than 3 decades ago. MOD™ delivered a cost-sensitive, full-family solution to ambient lighting.

MOD™x represents a modernization of this timeless form based on the original MOD™ value proposition: An affordably priced, full featured offering with best-in-class attention to detail.

Key Features

Variable Intensity Technology

MacAdam Ellipse Color Variation

Multiple size options available

2

1 3

6"4"3"2"

VariableIntensityTechnology

VI® Technology provides verifiable wattage for compliance with programs, agencies, state and local codes.

Why Use VI® Technology?

VI TECHNOLOGY

1. Specify light output required to achieve desired illuminanceDriven by application need, not limited fixture options

2. Specify fixture wattage to meet power density requirementsFixture labeled to your specification means no lost watts in your energy calculation

3. Specify a particular indirect/direct distribution for desired visual comfort*Uplight and downlight are independently programmed for maximum fixture flexibility*For I/D fixtures only

STD INDIRECT OUTPUT RANGELumen Output Efficacy

Max: 1200 lm/ft 117Min: 300 lm/ft 128

LPA INDIRECT OUTPUT RANGELumen Output Efficacy

Max: 1200 lm/ft 107Min: 300 lm/ft 118

Standard Uplight Distribution Low Peak Angle Uplight Distribution

DIRECT OUTPUT RANGELumen Output Efficacy

Max: 1100 lm/ft 94Min: 300 lm/ft 102

STEP 3: Manufacturer STEP 4: Verification

Litecontrol designs and manufactures luminaire to specifications.

Product arrives on site with clear, precise labeling, allowing wattage calculations based on actual versus highest possible values.

Specifier Litecontrol

STEP 1: Choose STEP 2: Specify

• Choose lumen output based on:

• Power density• Light levels• Ceiling brightness

• Specify based on the • published output range:• In 50 lumen increments per

foot (ex: 500, 550, 600)

Litecontrol's VI® technology module allows specification of LED light output to meet precise needs.

4 5

XCompetitive products cut the diffuser short, which results in source visibility.

Precise wiring and white, low profile connectors eliminate shadowing.

Die-cast end caps overlap diffuser and apply outward pressure on the extruded side rails to eliminate light leaks.

Recessed end caps slide vertically into place to eliminate risk of diffuser breakage during installation and removal.

Design Benefits

Light leaks are typical in slot products, as diffusers are often cut short to allow for thermal expansion over time. Litecontrol has eliminated these architecturally unacceptable gaps through an innovative end cap design which provides for diffuser expansion while at the same time eliminating light leaks.

Typical Competitor

Attention to Detail

Litecontrol Pendant Litecontrol Recessed

Diffuser Consistency

Lines of light are architecturally desirable; however, they are very unforgiving. Litecontrol's quality components and clever design deliver exceptional uniformity along the slot length.

6

Litecontrol's installer-friendly magnetic end caps are attached after the diffusers are installed.

End Cap Attachment

7

Slot products typically use LED boards designed for recessed troffers, which result in board lengths of less than 24". Litecontrol boards were designed for slot products and result in precise 12" increments.

Breakable-board technology allows specification of recessed products to 3" increments for recessed MOD luminaires.

Design Benefits

LED Board Design

3" Increments

MOD™x ensures a quality installation through numerous features included to assure ease of contractor assembly.

Installation Quality

MOD™ x's X-bracket design assists installers by providing reliable fixture alignment.

Extruded screw channels ensure tight seams. Joining method depicted is applicable for 3”, 4” and 6” only.

Captive reflector assemblies allow safe access to internal components.

X-Bracket Design Joining

98

Typical

Litecontrol

Captive Reflectors

Ordering GuideAdditional Options

Downlight Diffuser Regressed Diffuser (REG)

Mounting OptionsPendant, recessed, surface or wall mount options

Fixture Lengths2', 3', 4', 5', 6', 8'Recessed available in 3" increments

Dust CoverClear. Magnetic attachment

Baffle (BWO)

EmergencyEmergency lota CP-Series; the MOD™x family is also compatible with Dual-Lite inverters

SensorsDaylight and occupancy

Fixture Apertures2", 3", 4", 6"

Dimming Options1%, Lutron, DALI

Corners90 degree pendant, recessed inside and outside. Lit. 12" length

10 11

SOF REG BWOAsymmetric Diffuser

ASYM

Color Rendition

CCT 30K 35K 40KRf 83 82 82

Rg 96 96 96

CCT (K) 3009 3494 3975

Duv -0.0009 -0.0004 -0.0003

x 0.435 0.4052 0.3814

y 0.4012 0.3898 0.3768

CIE Ra 83 83 84

Color Rendering

CCT CRI R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R1430K 83 81 91 97 81 82 89 84 62 13 79 79 69 84 99

35K 83 81 89 95 81 81 85 86 65 13 73 79 62 83 97

40K 84 82 90 94 82 82 85 87 68 17 74 80 60 84 97

• L70: 280,000 (calculated per TM-21 extrapolated curve)• L70: >61,000 (reported per TM-21/LM80 6x's limitation)

• L90: 72,000 (calculated per TM-21 extrapolated curve)• L90: >61,000 (reported per TM-21/LM80 6x's limitation)

• 5 years

Rated Life

Color Data

30K 35K

FidelitySpectral Power Distribution

Warranty

Performance

40K

12 13

VI® Technology Standard (STD) Indirect Light Distribution Color Characteristics

Lighting Goals: Workplane: 2.5' FC: 35 Max LPD: .50 Room Size: 40'x25'

The scenarios below demonstrate how MOD™x can be specified to achieve comparable performance in different applications. MOD™x delivers architecturally appropriate color performance as measured by the latest industry-accepted metrics.

Energy usage: exceeds goal by 14%

Energy usage: exceeds goal by 6%

Energy usage: exceeds goal by 10%

Fixture Utilized: 4L-P-ID-STD-4-SOF-X-CX-35K-I030-D050

Fixture Utilized: 4L-P-ID-STD-4-SOF-X-CX-35K-I055-D050

Fixture Utilized: 4L-P-ID-LPA-4-SOF-X-CX-35K-I075-D050

9' Ceiling Height Fixture Layout: (3) 20' Rows

18' Ceiling Height Fixture Layout: (3) 20' Rows

Eliminate A Row Fixture Layout: (2) 20' Rows

Ceiling Height 9'

Fixture AFF: 7.5'

Distance to Ceiling Plane 1.5'

Lumen Output Indirect I030

Lumen Output Direct D050

Ceiling Height 18'

Fixture AFF: 7.5'

Distance to Ceiling Plane 16.5'

Lumen Output Indirect I055

Lumen Output Direct D050

Ceiling Height 9'

Fixture AFF: 7.5'

Distance to Ceiling Plane 1.5'

Lumen Output Indirect I075

Lumen Output Direct D050

500 lm/ft

300 lm/ft

500 lm/ft

550 lm/ft

500 lm/ft

750 lm/ft

16 25 36 38 29 24 24 30 39 39 30 24 24 30 38 36 26 16

20 32 47 48 36 28 28 37 50 50 37 28 28 36 48 47 32 20

22 36 53 54 41 31 32 42 56 56 42 32 32 41 54 53 36 22

23 38 55 57 43 33 34 44 59 59 44 34 34 44 57 56 38 23

24 39 57 58 45 35 35 45 61 61 45 35 35 45 58 57 39 24

24 39 57 59 45 35 35 45 61 61 45 35 35 45 59 57 39 24

24 38 56 58 44 34 34 45 60 60 45 34 34 44 58 56 38 24

23 37 54 56 42 32 33 43 58 58 43 33 33 42 56 54 37 23

21 34 50 51 39 30 30 39 53 53 39 30 30 39 51 50 34 21

18 28 41 43 33 25 26 33 44 45 33 26 26 33 43 42 28 18

14 21 29 31 25 21 21 25 32 32 26 21 21 25 31 30 21 14

18 26 36 37 29 24 25 30 39 39 30 25 24 29 37 36 26 18

21 31 45 46 35 28 29 36 48 48 36 29 28 35 46 45 31 21

23 35 50 51 39 31 31 40 54 54 40 31 31 39 51 50 35 23

24 37 52 54 41 33 33 42 56 56 42 33 33 41 54 52 37 24

25 37 53 55 42 34 34 43 57 57 43 34 34 42 55 53 37 25

25 38 54 55 42 34 34 43 57 57 43 34 34 42 55 54 38 25

24 37 53 55 42 33 34 43 57 57 43 34 33 42 54 53 37 24

23 36 51 53 40 32 32 41 55 55 41 32 32 40 53 51 36 23

22 33 48 49 37 30 30 38 51 51 38 30 30 37 49 48 33 22

19 29 41 42 32 26 27 33 44 44 33 27 26 32 42 40 29 19

16 22 30 31 26 22 22 27 33 33 27 22 22 26 31 30 22 16

15 21 30 42 46 37 27 20 17 17 19 25 34 44 44 33 23 16

17 24 37 52 58 46 32 24 20 19 22 29 42 56 56 40 27 19

19 27 41 59 66 51 36 26 22 21 25 33 47 63 63 46 30 21

20 29 44 62 69 54 38 28 23 23 26 35 50 67 66 48 32 22

21 30 45 64 71 56 39 29 24 23 27 36 51 69 68 50 33 23

21 30 45 65 72 56 39 29 24 23 27 36 51 69 68 50 33 23

20 30 44 63 70 55 39 28 23 23 27 35 51 68 67 49 33 23

19 28 42 61 68 53 37 27 22 22 25 34 48 65 65 47 31 21

18 26 39 56 62 48 34 25 21 20 23 31 44 60 60 43 29 20

16 22 33 47 52 41 29 22 18 18 21 27 38 50 50 36 25 17

13 18 26 34 38 31 23 18 16 16 18 22 29 37 36 28 20 15

Workplane (40'x25')

AVG MAX MIN MAX/MIN

38 61 14 4.4

Ceiling

AVG MAX MIN MAX/MIN

24 58 6 9.6

LPD

.432

Workplane (40'x25')

AVG MAX MIN MAX/MIN

38 57 16 3.6

Ceiling

AVG MAX MIN MAX/MIN

26 33 16 2.1

LPD

.470

Workplane (40'x25')

AVG MAX MIN MAX/MIN

36 72 14 5.5

Ceiling

AVG MAX MIN MAX/MIN

34 86 9 9.5

LPD

.454

Rela

tive

Pow

er

30K35K40K

Wavelength (nm)

0%

20%

40%

60%

80%

100%

380 430 480 530 580 630 680 730 780

SPECTRAL POWER DISTRIBUTION COMPARISON

60

70

80

90

100

110

120

130

140

50 60 70 80 90 100

Gam

ut In

dex,

Rg

Fidelity Index, Rf

1 2 1

2

Approx. limits for sources on the Planckian locus.

Approx. limits for practical light sources.

Rf-Rg Plot

30K35K40K

12'

12'

12'

12'

16'

Ordering Information

Feature OptionsSeries 2L

3L

4L

6L

Mounting P

S

W

Fixture Distribution D

ID

AD

AID

Uplight Distribution STD

LPA

Row Length (in feet)

Max Length (in row) 02

03

04

05

06

08

Downlight Diffuser SOF

REG*

BWO*

ASYM*/**

*Not available with Patterns

**Must be ordered with AD

Finish/Color C1 (Matte White)

C2 (Textured Matte White)

C3 (Light Silver)

C4 (Machined Aluminum

C5 (Carbon Black)

C6 (Textured Camera Black)

CC (Custom)

Color Temperature 30K

35K

40K

2200K-3000K SpectraSync™ Dim-to-Warm*

2700K-5000K SpectraSync™ Tunable White*

2700K-6500K SpectraSync™ Tunable White*

*Must be ordered with D05 or DS5 Driver options;excludes 2' lengths

Indirect Output/ft I030 (min)

I125 (STD-max); I090 (LPA-max)

Direct Output/ft D030 (min)

D100 (max)

Feature OptionsSeries 2L

3L

4L

6L

Mounting R

Fixture Distribution D

AD

Row Length (in feet)

Row Length Adder (in inches) /3

/6

/9

Max Length (in row) 02

03

04

05

06

08

Downlight Diffuser SOF

REG*

BWO*

ASYM*/**

*Not available with Patterns

**Must be ordered with AD

Finish/Color C1 (Matte White)

Color Temperature 30K

35K

40K

2200K-3000K SpectraSync™ Dim-to-Warm*

2700K-5000K SpectraSync™ Tunable White*

2700K-6500K SpectraSync™ Tunable White*

*Must be ordered with D05 or DS5 Driver options;excludes 2' lengths

Direct Output/ft D030 (min)

D085 (max)

PENDANT, SURFACE, WALL RECESSED

NOTE: Additional options available. Review specification sheets for more details.

15

ALERA LIGHTING

ARCHITECTURAL AREA LIGHTING

BEACON PRODUCTS

COLUMBIA LIGHTING

COMPASS

DUAL-LITE

HUBBELL CONTROL SOLUTIONS

HUBBELL INDUSTRIAL LIGHTING

HUBBELL OUTDOOR LIGHTING

KIM LIGHTING

KURT VERSEN

LITECONTROL

PRESCOLITE

WHITEWAY

701 Millennium Blvd. Greenville, SC 29607Tel 864.678.1000www.litecontrol.com

LC-HLI1090 4/18

Copyright © 2018 Litecontrol, a division of Hubbell Lighting, Inc. All rights reserved. Please refer to online specifications for most up-to-date content as specifications are subject to change without notice.