mn pneumatic gripsem2 microtest english d
TRANSCRIPT
-
7/29/2019 Mn Pneumatic Gripsem2 Microtest English d
1/4
Pneumatic Wedge Action Grips MN Series MICROTEST
1
-
Pneumatic Wedge Action Grips
MN series
MICROTEST
2011
MICROTEST
MICROTEST, S.A.Instruments and Equipments for Materials Testing
(+34) 91 796 33 32 www.microtest-sa.com
-
7/29/2019 Mn Pneumatic Gripsem2 Microtest English d
2/4
Pneumatic Wedge Action Grips MN Series MICROTEST
2
Description
Pneumatic wedge action grips feature an open front design which facilitates easy
loading of large specimens. This series can accommodate round specimens up to
20mm in diameter and flat specimens up to 25mm thick in forces from 20kN to
300kN.
These grips are operated with a pneumatic valve mounted on the grip. Powered
by pneumatic control, the faces or jaws are moved by a pneumatic piston
clamping the sample, and providing additional pressure to minimize specimen
slippage. The wedge action enhances this hold with minimum slippage by
increasing the gripping load as the force increases during the test.
The shape of the jaws can be V-face for round specimens or pyramid surface for flatspecimens. The vee faces used for round specimens by design have a reduced areaat the center, which compromises their ability to absorb high energy breaks withoutfracture. This grip uses a split-vee face configuration which allows the break energyto be dissipated without damaging the faces.
The jaws are easily interchangeable. The user only needs to remove the guiding
covers by loosening the knurling screws that secure them to the grip body and
replace the jaws without effort. For security reasons, this operation should be
made disconnecting the air supply system.
The lubrication of the jaw face carrier is through standard grease fitting.
-
7/29/2019 Mn Pneumatic Gripsem2 Microtest English d
3/4
Pneumatic Wedge Action Grips MN Series MICROTEST
3
MN pneumatic wedge grips action.
-
7/29/2019 Mn Pneumatic Gripsem2 Microtest English d
4/4
Pneumatic Wedge Action Grips MN Series MICROTEST
4
Standard Jaw faces
Model MN/50-100 MN/200 MN/300
Force 50-100kN 200kN 300kN
Flat specimens
// min 0-9mm 0-9mm 0-9mm
//Max 12-20mm 12-20mm 10-18mm
// Surface Pyramid / Serrated Pyramid / Serrated Pyramid / Serrated
Clamping area WxL 40x60mm 40x60mm 50x70mm
Round specimens
min 4-12mm 5-12mm 5-12mm
Max. 12-20mm 12-20mm 16-24mm
Surface V- Serrated V- Serrated V- Serrated
(*) These are typical values. Other values for opening and clamping area are also possible.
Model MN/50-100 MN/200 MN/300 MN/400-600
Force Capacity 50-100 kN 200 kN 300 kN 600 kN
BodyNickel coated
Steel
Nickel coated
Steel
Nickel coated
Steel
Nickel coated
Steel
Temperature
range0C - +130C 0C - +130C 0C - +130C 0C - +130C
Weight /head 12 kg 14 kg 20kg 48 kg
Delivery 1 Pair of heads 1 Pair of heads 1 Pair of heads 1 Pair of heads