minishelter installation standard for dbs solution

8/21/2019 Minishelter Installation Standard for DBS Solution

1/32

www.huawei.com

Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved.

STC-4G3 minishelter

installation standardfor DBS solution


2/32

Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved.Page2

1. Minishelter

MW

2G/3G

Rectifer

Battery4G-

FDD4G-TDD


3/32

Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved.Page

1. Minishelter

MW

2G/3G

Rectifer

Battery4G-

FDD4G-TDD


4/32

Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved.Page!

The technology cabinet should be closed to

tower side

Technology cabinet

Battery

cabinet

1. Minishelter


5/32

Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved.Page"

The cabinet should be fixed on the ground. The cabinet should be parallel.

Front vieBac! vie

1. Minishelter


6/32

Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved.Page#

1. Minishelter

The minishelter grounding bar should be installed at the outside

bottom of the technology cabinet(closed to the tower).


7/32

Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved.Page$

All signal cable and power cable should

be put in the flexible pipe.

All cable hole should be cover by sealing

mud.

1. Minishelter


8/32

Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved.Page%

All cable terminals should be installed in

the shrink pipe.

1. Minishelter


9/32

Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved.Page&

1. Minishelter

Attach the lable for each cable.


10/32


The door sensor should be onthe right top of the minishelter.

The smoke sensor should be on

the left top of the minishelter.

2. Technolo"y cabinet


11/32


All the technology power cable

should be connected as design.

4 G

3 G / 2

G # $ M %

M W

$

i r - c o n 1

$

i r - c o n 2

$ i r - c o n $ c o & t



12/32


Attach the lable for each cable and rectifier.

Install the terminal lugs for each cable.



13/32


M AT! should be connected to "#$#%.

#'T## % should be connected

to " #$#%.

The D'D( o)

2G/3G.

The D'D( o)

MW.


The D'D( o) FDD *TDD.

*+,* % should be connected to "

#$#%.


14/32

Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved.Page1!


All technology e-uipment should be

installed the ground cable.


15/32

Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved.Page1"

The * should be installed on the right top of the cabinet.



16/32

Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved.Page1#

The temperature/humidity sensor

should be installed in the left middle

of power cabinet. DB+ site

door ' smoke transfer

board

temperature/humidity

sensor



17/32

Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved.Page1$

The water sensor should be installed on the

right bottom of the power cabinet.0AM1 should be put on the power cabinet.



18/32

Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved.Page1%

The output port of the door '

smoke transfer board should be

connected to the alarm board.


2 h l bi


19/32

Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved.Page1&

The input port of the door ' smoke

transfer board should be

connected to the sensor.


2 T h l bi


20/32


%nused door port of door and smoke

tranfer board should be shorted.

%nused smoke port of door and

smoke tranfer board should be open.


2 T h l bi t


21/32


The signal cable2 power cable and technology

cable should be divided from the cable hole.

The e-uipment and cabinet ground

cable should be divided.


2 T h l bi t


22/32



The door holding stick is on thebottom of the cabinet.

The 0A! cable on the door is useless2

don3t connect any cable.

3 B tt bi t


23/32


The door sensor should

be on the right top of the

minishelter.

The smoke sensor should be

on the left top of the

minishelter.

3. Battery cabinet

3 B tt bi t


24/32


3. Battery cabinet

The cabinet should be installed the

ground cable.

The door holding stick is on the

bottom of the cabinet.

3 B tt bi t


25/32

Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved.Page2"

The battery power cable should be

installed as design.

The battery sensor should be on the

bottom of the battery cabinet.

3. Battery cabinet

3 Battery cabinet


26/32

Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved.Page2#

3. Battery cabinet

$' ,(Tcirc&itbrea!

#

$ir-con 1

#

$ir-con 2

#

$' soc!et

#

#oo the #

cable

#oo the

cable

The A$ power cable should be connected as design.

3 Battery cabinet


27/32

Copyright © 2012 Huawei Technologies Co., Ltd. All rights reserved.Page2$

The battery li-uid pipe should be

installed for each battery string.

The battery cell cover should be

installed for each battery cell.

3. Battery cabinet

3 Battery cabinet


30/32


#I!,2#I!42#I!52 #I!6

A0M" to A0M 7 and #I!, to #I!6 alarm cable should be installed as design.

4. $lar cable

A0M" to A0M7

BT+ 0T%4255


31/32


um.$lar

+everity 0ternal $lar ae

BT+Boar

nicator

0T%4255$lar

port

$larTye

$lar D $lar cable

1 Critical Telecom shelter AC powerfail

U!U-"1#$!%T-A&'1

A&'1 () *+11,hiteoran/e0

)ran/e-

A&'2 () *+1,white/reen0

/reen-2 CriticalTelecom shelter battery discharge

3 Critical ecti5er fault A&'3 () *+12+white6lue0

6lue-，

4 arnin/ Telecom shelter tower li/ht A&'4 () *+1,7white6rown

Brown-

+ Critical TelecomGeneral shelter 5re

U!U-"1#$!%T-A&',

A&'+ () *+1,3hiteoran/e0

)ran/e-

* Critical

Telecom shelter hi/h

temperature A&'*

() *+1,+

white/reen0

Blue-

7 Critical TelecomGeneral shelterdoor

A&'7 () *+1,4white6lue0

Green，

'inor Telecom shelter air conditionfault

A&' () *+1,1white6rown

Brown-

Alarm port Alarm cable 8elay

D8(3 Tower li/ht alarm ela9 A&'4

ela9 A&'D8(+ AC alarm1

D8(* AC alarm2


32/32

Thank youwww.huawei.com

minishelter installation standard for dbs solution

Documents