miniprox data sheet 11-01 · 5365 (wiegand) 5368 (clock-and-data) hazardous location miniprox shown...
TRANSCRIPT
-
MiniProx® Reader
Application
The MiniProx proximity card reader’s potted electronics
and slim, attractive design are ideal for indoor or
outdoor mounting.
Proximity Card Reader
Features
• Accepts 5 to16 volts, meeting most voltage
requirements.
• Available with Wiegand or Clock-and-data
interface.
• Allows easy upgrade from magstripe to a
proximity reader; no rewiring or pulling of new
cable required.
• Offers high reliability, consistent read-range and
low power consumption in an easy-to-install
package.
• Mounts directly onto metal with no change in
read range performance.
• Provides multicolor LED, compatibility with all
standard access control systems and internal or
host control of LED and beeper.
5365 (Wiegand)
5368 (Clock-and-Data)
Hazardous LocationMiniProx shown withincorporated junction boxrated for use in hazardouslocations.
An ASSA ABLOY Group company
CLASSIC
Designer
-
w w w . H I D C o r p . c o m
Printed in the U.S.A. ©2001 HID CorporationSpecifications subject to change without notice.
MiniProx® Reader
FeaturesMounting: unobtrusive design mounts directly onto metal such as doormullions.
Hazardous Location MiniProx reader Mounting: designed to mount ontoa junction box included with each reader. The junction box is attached toan appropriate surface location utilizing four holes.
Audiovisual indication: when a proximity card is presented to the reader,the red LED flashes green and the beeper sounds. The multicolor LED andbeeper can also be controlled individually by the host system.
Diagnostics: on reader power-up, an internal self-test routine checks andverifies the setup configuration, determines the internal or externalcontrol of the LED and beeper, and initializes reader operation. Anadditional external loop-back test allows for the reader outputs and inputsto be verified without the use of additional test equipment.
Indoor/outdoor design: sealed in a rugged, weatherized polycarbonateenclosure designed to withstand harsh environments, providing reliableperformance and a high degree of vandal resistance.
Easily interfaced: Wiegand output model interfaces with all existingWiegand protocol access control systems. Clock-and-Data (magneticstripe) model interfaces with most systems that accept magnetic stripereaders.
Hazardous Location MiniProx reader Interface: can be operated with anyfacility code and card number format requirements using the Wiegandprotocol.
Security: Recognizes card formats up to 85 bits, with over 137 billionunique codes.
Warranty: warranted against defects in materials and workmanship forlife from date of shipment (see complete warranty policy for details).
Part numbers:Base Part No.: 5365 Wiegand interfaceBase Part No.: 5368 Clock-and-data interfaceDescription: Tri-State LED, Internal beeper onOptions: • CLASSIC series cover in white, beige, charcoal gray, or black or • Designer series cover in white, wave blue, charcoal grey, or black • LED and beeper operation • custom label(Please see “How to Order Guide” for a description of the options andassociated part numbers).
SpecificationsTypical maximum* read rangeProxCard® II card - up to 5.5" (14 cm)ISOProx® II card - up to 5" (12.5 cm)DuoProx® II card – up to 5” (12.5 cm)ProxKey™ II keyfob - up to 2" (5 cm)ProxCard Plus™ card - up to 2” (5 cm)Smart ISO/DuoProx™ cards – up to 5” (12.5 cm)Proximity & MIFARE™ card - up to 5” (12.5 cm)*Depending on local installation conditions.
Dimensions:6.0" x 1.7" x 1.0"(15.2 x 4.3 x 2.54 cm)
Material: Polycarbonate UL 94
Power supply:Standard MiniProx: 5-16 VDCHaz. Loc. MiniProx: 5-16 VDCLinear power supplies are recommended.
Current requirements:Average: 30 mA (5 VDC); 20 mA (12 VDC)Peak: 110 mA (5 VDC); 110 mA (12 VDC)
Operating temperature:-22° to 150° F (-30° to 65° C)
Operating humidity:0-95% relative humidity non-condensing
Weight:With terminal strip 3.5 oz. (99 gm)With pigtail 3.8 oz. (108 gm)Haz. Loc. MiniProx: 3.8 oz. (108 gm)
Transmit frequency: 125 kHzExcite frequency: 125 kHz
Cable distance:Wiegand interface: 500 feet (150 m)Clock-and-data interface: 50 feet (15 m)Recommended cable is ALPHA 1295 (22 AWG)5 conductor minimum stranded with overall shield orequivalent. Additional conductors may be requiredfor LED or beeper control.
Certifications:Canada/UL 294 Listed: Access Control System UnitsCanada/UL 1604 Listed (with Haz. Loc. junction boxonly): Hazardous Locations Class I, Div. 2, GroupsA,B,C,D.FCC Certification, United StatesCanada CertificationEU and CB Scheme Electrical Safety (EN60950 andIEC60950 ITE Electrical Safety)Fifteen EU Countries under the R&TTE Directive (EN300 330 - SRD, and ETS 300 683 - EMC)CE MarkAustralia C-TickNew Zealand
LIT5365DS 11/01, supersedes 3/01
VIOLETBLUEYELLOW
BROWNORANGEDRAINWHITEGREENBLACKRED
CARD PRES. 10HOLD 9
BEEPER 8
RED LED 7GRN LED 6
SHIELD GND 5DATA-1 4DATA-0 3
GROUND 2VDC 1
6.00"(15.2 cm)
1.70"(4.3 cm) 1.00"
(2.54 cm)
9292 Jeronimo RoadIrvine, CA 92618-1905 U.S.A.+1 (949) 598-1600 or (800) 237-7769FAX +1 (949) 598-1690
-
MaxiProx® Reader
Application
HID’s MaxiProx Reader is ideal for installations
incorporating parking control and long read range
applications. The MaxiProx reader packages all the
electronics in one rugged, attractive and easy-to-
install housing.
Proximity Card Reader
Features
• Long read range distance (up to 8’ with ProxPass®).
• Autotune allows read range to be maintained
within four inches of metal.
• Wiegand, Clock-and-Data and selectable serial
outputs available.
• “Parking hold” feature allows connection to a loop
detector to ensure accurate detection of vehicles in
parking lanes.
• Compatible with all HID cards and tags with
formats up to 85 bits.
• Multicolor LED with internal or host control of the
LED and beeper.
• Two MaxiProx units can operate one meter apart
for “HI-LO” (truck and car) installations.
• Reader supervision signal for CASI-RUSCO panels.
5375 Series
An ASSA ABLOY Group company
-
w w w . H I D C o r p . c o m
MaxiProx® Reader
FeaturesMounting: mount on non-metallic surfaces for optimal readrange performance.
Audiovisual indication: when a proximity card is presented tothe reader, the red LED flashes green and the beeper sounds.The multicolor LED and beeper can also be controlled individuallyby the host system.
Diagnostics: on reader power-up, an internal self-test routinechecks and verifies the setup configuration, determines theinternal or external control of the LED and beeper, and initializesthe reader’s operation.
Indoor/outdoor design: sealed in a rugged, weatherizedpolycarbonate enclosure designed to withstand harsh environmentsas well as provide a high degree of vandal resistance for reliableperformance anywhere.
Easily interfaced: interfaces with all existing Wiegand, Clock-and-Data, RS-232, RS-422 and RS-485 protocol access controlsystems. The serial interfaces support baud rates of 1200, 2400,4800, and 9600 baud.
Security: includes a tamper switch to provide electronic notifica-tion of reader tampering. Recognizes card formats up to 85 bits.
Warranty: warranted against defects in materials and workman-ship for life from date of shipment (see complete warranty policyfor details).
Part number:Base Part No.: 5375Description:Description:Description:Description:Description: Wiegand interface, charcoal gray, tri-state LED,internal beeper onOptions: • LED and beeper operation • custom label(Please see “How to Order Guide” for a description of theoptions and associated part numbers).
SpecificationsTypical maximum* read range:ProxCard® II card - up to 29” (73 cm)ISOProx® II card - up to 20" (50 cm)ProxKey™ II keyfob - up to 17" (43 cm)ProxCard® Plus card - up to 13" (25 cm)SmartProx™ card - up to 17” (43 cm)ProxPass® - up to 8’ (240 cm, 2.4 m)*Depending on local installation conditions.
Dimensions:11.8" x 11.8" x 1.0" (30.0 x 30.0 x 2.54 cm)
Material: Polycarbonate UL 94
Power supply:Configurable 12 or 24 VDCLinear power supplies are recommended.
Current requirements:DC Current at 12V: Avg. 200mA, Peak 700mADC Current at 24V: Avg. 260mA, Peak 1.2A
Operating temperature:-22° to 150° F (-30° to 65° C)
Operating humidity:0-95% relative humidity non-condensing
Weight: 51 oz. (1.4 kgm)
Transmit frequency: 125 kHz
Certifications:Canada/UL 294 Listed: Access ControlSystem UnitsFCC Certification, United StatesCanada CertificationCE Mark, Fifteen EU Countries under theR&TTE Directive (EN60950 - ITE ElectricalSafety, EN 300 330 - SRD, and ETS 300 683 - EMC)IEC60950, ITE CB Scheme Electrical SafetyAustralia C-Tick MarkNew Zealand EMC
Cable distance:Wiegand interface: 500 feet (152 m)Clock-and-data interface: 50 feet (15 m)RS-232: 50-200 feet (15-61 m)Recommended cable is ALPHA 1295 (22AWG) 5 conductor minimum stranded withoverall shield or equivalent. Additionalconductors may be required for LED orbeeper control.RS-422 and RS-485: 4000 feet (1219 m)Recommended cable is ALPHA 1297.LIT5375DS 3/01, supersedes 7/00
1.00"2.54 cm
11.80"29.97 cm
11.80"29.97 cm
BUZZER+ DCGROUNDDATA 0DATA 1SHIELD GROUNDGREEN LEDRED LEDBEEPERHOLDTAMPER COMMONTAMPER SELECT
1.2.3.4.5.6.7.8.9.
10.11.12.
9292 Jeronimo RoadIrvine, CA 92618-1905 U.S.A.(949) 598-1600(800) 237-7769FAX (949) 598-1690
Printed in the U.S.A. ©2001 HID CorporationSpecifications subject to change without notice.
-
Application
HID’s ProxPoint Plus reader combines multiple configuration
options with an attractive, inconspicuous design and economical
price. Its secure potted electronics are ideal for both indoor
and outdoor applications.
Value Priced Proximity Card Reader
ProxPoint® Plus
Features
• Features a beeper and multicolor LED which can be host-
and/or locally controlled.
• Enables various beeper and LED configurations, depending
on individual site requirements.
• Can read HID cards with formats up to 85 bits.
• Designed for mounting directly onto metal with no
change in read range performance.
• Available with either Wiegand or Clock-and-Data
(magnetic stripe data) output.
• Compatible with all standard access control systems.
6005B
An ASSA ABLOY Group company
• Aesthetic design available in
two cover designs and in four
colors to match any decor.
• Includes multilingual installation
manual.
-
w w w . H I D C o r p . c o m
Printed in the U.S.A. ©2002 HID CorporationSpecifications subject to change without notice.
ProxPoint® Plus
Specifications
Typical maximum* read rangeProxCard® II card - up to 3" (7.6 cm)ISOProx® II card - up to 2.5" (6.35 cm)DuoProx® II card – up to 2.5" (6.35 cm)Smart ISOProx®/DuoProx® II cards – up to 2.5" (6.35 cm)Proximity & MIFARE® card - up to 2.5" (6.35 cm)ProxCard Plus® card - up to 1.0" (2.5 cm)ProxKey® II keyfob - up to 1.5" (3.8 cm)MicroProx® Tag - up to 2" (5.1 cm)
*Depending on local installation conditions.
Dimensions3.135" x 1.720" x 0.660" (7.96 x 4.37 x 1.68 cm)
Material: Polycarbonate UL 94
Power Supply5-16 VDCLinear power supplies are recommended.
Maximum Current RequirementsCurrent (DC)Average 30 mA, Peak 75 mA
Operating Temperature-22° to 150° F (-30° to 65° C)
Operating Humidity0-95% relative humidity noncondensing
Transmit Frequency: 125 kHz
Weight: 2.7 oz. (75 gm)
CertificationsCanada/UL 294 ListedFCC Certification, United StatesCanada CertificationEU and CB Scheme Electrical Safety (EN60950 andIEC60950 ITE Electrical Safety)Fifteen EU Countries under the R&TTE Directive(EN 300 330 - SRD, and ETS 300 683 - EMC)CE MarkAustralia C-Tick, New ZealandTaiwan, China
Cable DistanceWiegand or Clock-and-Data interface:500 feet (150 m)Recommended cable is ALPHA 1295 (22 AWG) 5conductor stranded with overall shield or equivalent.
LIT6005BDS 1/03, supersedes 8/02
Features
Mounting: unobtrusive design can be mounted directly onto metalsuch as door mullions.
Audiovisual indication: when a proximity card is presented to thereader, the red LED flashes green and the beeper sounds. Themulticolor LED and beeper can also be controlled individually bythe host system.
Diagnostics: on reader power-up, an internal self-test routinechecks and verifies the setup configuration, determines the internalor external control of the LED and beeper, and initializes readeroperation. An additional external loop-back test allows for the readeroutputs and inputs to be verified without the use of additional testequipment.
Indoor/outdoor design: sealed in a rugged, weatherized polycarbon-ate enclosure designed to withstand harsh environments, providingreliable performance and a high degree of vandal resistance.
Easily interfaced: Wiegand output model interfaces with all existingWiegand protocol access control systems. Clock-and-Data(magnetic stripe) model interfaces with most systems that acceptmagnetic stripe readers.
Security: Recognizes card formats up to 85 bits, with over 137billion unique codes.
Warranty: Lifetime warranty against defects in materials andworkmanship (see complete sales policy for details).
Part numbersBase Part No.: 6005B Wiegand InterfaceBase Part No.: 6008B Clock-and-Data InterfaceDescription: Tri-State LED, Pigtail ConnectionOptions:• CLASSIC series cover in gray, beige, black or white (or)• Designer series cover in grey, wave blue, black or white• custom label• custom embossing in housing
(Please see “How to Order Guide” for a description of options andassociated part numbers).
9292 Jeronimo RoadIrvine, CA 92618-1905 U.S.A.(949) 598-1600 (800) 237-7769FAX (949) 598-1690
1.720 .660
3.135 2.690
-
SOFTWARE CONTROLLER READER ACCESSORIES
Access Control
It can be configured for physical access control of doors, elevators & car parks. The integral keypad is used when access to a high security area is required, and users also have to enter his PIN code for access. Exit card reader used for access control is connected to the entry reader, and has 1 Leds for visual indication. Time Attendance Clocking Most models of the card readers can be configured for time attendance clocking only, or combined with an access control. Using a common ID card, user can both access a controlled door and at the same time 'clock-in' or 'clock-out' his attendance at work. Intrusion Alarm The LCD and the keypad of the reader can be used as an alarm keypad for arming/ disarming of alarm sensors as part of an integrated security system for buildings. The security system software will be able to log the identification of the cardholder relating to all operational and alarm activities.
The Falco range of proximity reader is available in
26-Bit Wiegand format operating at 125KHZ.and
have the most advanced electrical and mechanical
features.
This range of contactless card readers can be
interface with Falco controller for multiple
applications such as access control, time
attendance, guard tour, arming/disarming of
intrusion alarms and on/off control of power or
devices, etc.
You can also view the entry event transaction
video when you are exiting from the respective
gates or door access. Upon proxing on the exit
reader, the latest entry event transaction will be
search and the video will pop up on one side of the
display window in the server or remote
workstation. The other side of the display window
will show the live or exit transaction event video.
Hence the security officer or car park attendant
can compare and check if the same car or person
enters is the same as the exit object. If the security
officer suspected something is wrong he can
always sound the alarm or use the require video as
evidence. This enhances the security of the car
park.
www.falcowww.falcowww.falcowww.falco----ecom.comecom.comecom.comecom.com
AY–E310B/ AY-F410B
-
Model AY-E310B / AY-F410B
Card Type
EM, 64 bits standard R/O or compatible
HID, MIFARE 14443A, T15693 (optional)
Transmitting Frequency 125KHz/ 13.56MHz
Reader Range Up to 7cm ( in noise-free environment)
Keypad 12 keys(0-9,*,#)
Keypad output protocol Wiegand 6bits or Burst Wiegand 8bits
Output protocol Wiegand
Indicator Bicolor LED ( red/green)
Case Material ABS (UL94V-0) fully waterproof
Working Voltage DC + 8.5V to 16V
Power Consumption Average 56mA, Peak 120mA @ 12VDC
Dimension ( H x W x D)mm 112 x 75 x 23
Dimension ( H x W x D )in 4.4 x 2.9 x 0.9
Weight 250g MAS (8.8oz MAX )
Operating Temperature 0°C-70°C (32°F-158°F)
Operating Humidity 5%-95% (relative humidity non-condensing)
Model AY-E310B / AY-F410B
Card Type
EM, 64 bits standard R/O or compatible
HID, MIFARE 14443A, T15693 (optional)
Colour Name Description Red V+ +8.5V to 16V
Black GND Ground
Green DATA 0 Wiegand Data output 0
White DATA 1 Wiegand Data output 1
Brown LED Pull low to change LED cable to green
Blue BEERPER Pull low to turn on beerper
Technical SpecificationTechnical SpecificationTechnical SpecificationTechnical Specification
Technical SpecificationTechnical SpecificationTechnical SpecificationTechnical Specification
-
SOFTWARE CONTROLLER READER ACCESSORIES
Features and Benefits:
More than 30Pcs per second Speed
Power, Frequency, Communication Lights Function
Less than 12 Watts
12VDC, 4A Power
Wide Spectrum and Jump Frequency
Less Maintenance : UHF card is a passive card (battery less)
Delay Function: There is a present delay. Eg: Set 5 seconds delay, when card A is flashed, reader will wait for 5 seconds to scan the same card again. If different card (card B) is flashed within 5 seconds, it will be scanned. This to avoid continuous transactions to clutter PC reporting.
AY-MR6011A is a high performance long range
reader read up to 8m (free air reading) depends
on the interference on site and proper card
reading angle. It’s ideal for car parking system.
AY-MR6011A compatible with multi-protocol,
integrated design, quick read, multi-tag read and
can used widely in RFID systems.
AY-MR6011A complete with mounting bracket
and power supply, housing made of PET material
which is weatherproof against sunshine and rain.
OPERATION CONSTRAINTS: Reading range will decrease if there is metal tinted solar film such as Air-cool and etc. UHF can NOT pass through solar film with heavy metal oxide such as VKOOL. If heavy metal oxide total block UHF signal, might require user to wind down windows for about 20cm to allow UHF signal penetration into car and read card.
www.falco-ecom.com
AY-MR6011A
-
Model AY-MR6011A
Protocol ISO18000-6B,ISO18000-6C(EPC GEN2)
Frequency Range StandardISM 902~928MHz or ISM 865~868MHz,other frequency available
Operation Mode FHSS
RF Power 0~30dBm,software adjustable
Reading Speed Software Programmable,Average Reading per 64Bits:
-
Model(Order Code) TA-80 UHF RFID Card
Physical Characteristics Dimensions 84(L)*54(W)*0.8(H)mm
Material PVC,PET
Environment Operating Temp -10°C to 50°C (14°F to 122°F)
Storage Temp -10°C to 50°C (14°F to 122°F)
non-condensing
Enclosure
IP-67
Protocol ISO18000-6B/EPC Class1 Gen2
Memory size 2048bits/96bits
Frequencies UHF
Model(Order Code) TA-80+EM Dual-Frequency RFID Tag
Physical Characteristics Dimensions 84(L)*54(W)*0.8(H)mm
Material PVC,PET
Environment Operating Temp -10°C to 50°C (14°F to 122°F)
Storage Temp -10°C to 50°C (14°F to 122°F)
non-condensing
Enclosure
IP-67
Protocol ISO18000-6C/EPC Class1 Gen2/ EM 4100
Memory size 96bits/40bits
Frequencies UHF (915M)/LF (125K)
Model(Order Code) TA-80+M1 Dual-Frequency RFID Tag
Physical Characteristics Dimensions 84(L)*54(W)*0.8(H)mm
Material PVC,PET
Environment Operating Temp -10°C to 50°C (14°F to 122°F)
Storage Temp -10°C to 50°C (14°F to 122°F)
non-condensing
Enclosure
IP-67
Protocol ISO18000-6C (EPC Class1 Gen2)/ISO/IEC
14443A (Mifare 1) Memory size 96bits/8Kbits (1K bytes)
Frequencies UHF (915M)/HF (13.56M)
-
MR 6111A Dual Frequency Long Range Integrated Reader
MR6111A generation 2 reader are design base on generation one(MR6011A), the
reader support dual frequency, compliance to multi protocol, integrated antenna design,
support both active and passive tag, widely use in various RFID system like below:
Logistics and warehouse Management: Goods flow, warehouse management, and the flowing management of mail, parcel, luggage.
Intelligent parking Management: Parking management and automatic charge
Productive lines Management: Production process fixed identification Other fields: Used widely in club management, library,
student’ school, consumption management, time management, dinner management,
pool management
Reader Characteristic:
Integrated antenna design, easy for installation
Adopt with special circuit design,to achieve two frequency working at same time
Use active tag will be easy pass through car’s protection film Compliance to ISO18000-6B and ISO18000-6C (EPC-GEN2) standard
Read & Write tag:read 5-8m, write distance is 60% of reading distance(depend on tag)
Reader support multi-tag identify, single tag read, write, lock, kill etc.
-
TECHNICAL SPECIFICATIONS
Model No. MR6111A
Support protocol ISO18000-6B,ISO18000-6C(EPC GEN2)
Frequency Standard configuration: ISM 902~928MHz and ISM2.45GHz
ISM 865 ~ 868MHz and ISM2.45GHz (optional)other
frequency can customize
Operation Mode FHSS
RF Power 0~30dBm, Software Programmable
Reading Speed Software Programmable, single card per 64Bits:
-
AY–WO20B (BLACK) / AY–WO20W (WHITE) Advanced Multi-Format RFID Proximity Reader
AY-WO20 is a powerful RFID proximity card reader of 125 KHz cards and tags, featuring multi-format protocol and a read range of up to 100 mm (3.94 inches). With a sleek design and a tough, UV-resistant, water-resistant casing, the AY-WO20 is equally suited to indoor and outdoor use. Economical and reliable.
Certified compliance with all leading International Safety and Access Control standards.
General Description
The AY-WO20 with multi-format output reads RFID 125 KHz ASK-type EM cards from a range of up to 100 mm (3.94 in.)*.
Designed for easy mounting with hidden screws (security screws may be used to enhance strength) and cover. Optical tamper adds protection against wall removal, and the buzzer adds audible RFID card read. LED control can give system based information to the end user.
The AY-WO20 is crafted out of the finest materials and to the highest manufacturing standards under ISO 9001:2000 Certified Quality standards.
Main Features
• Backed by International Guarantee and service with ISO9001 (Certified TUV Rhineland) level business and manufacturing operations.
Wide range operating voltage: 5 to 16VDC. Excellent RFID card read range of up to 100 mm (3.94 in.).
Multi-format output: Wiegand 26-Bit, clock & data, and RS-232.
PROFESSIONAL GRADE FEATURES
• •
•
• • • • •
• •
RF modulation: ASK at 125 kHz. Internal buzzer. LED color control input. Optical wall tamper detection. Water-resistant with epoxy potting (IP65) suitable for indoor and outdoor applications.
Made of tough polycarbonate UV-resistant plastic. Includes mounting template for easier installation.
-
AY–WO20B/ AY-WO20W Advanced Multi-Format RFID Proximity Reader
Product Specifications
ELECTRICAL CHARACTERISTICS • Operating Voltage Range: • Input Current:
•
• • • •
Tamper Output:
Max. Distance to Controller: Inputs: LEDs: Proximity Card Reader:
5 to 16VDC, from a regulated power supply Standby: 35 mA at 12VDC Maximum: 100 mA at 12VDC Open collector, active low, max. sink current is 16 mA Optical tamper must be flush to wall surface to work With proper wiring reader to controller can be 150m (500 ft.)
LED Control Input; N.O. Dry Contact Two bi-colored LEDs Maximum read range*: 100mm (3.94 in.) Modulation: ASK at 125 kHz Compatible cards: All 26-Bit EM Cards
* Measured using Rosslare Prox Card AT-R14 or equivalent. Range also depends on electrical environment and proximity to metal.
ENVIRONMENTAL CHARACTERISTICS • Operating Temperature: • Operating Humidity: • Operating Environment:
PHYSICAL CHARACTERISTICS • Dimensions: • Weight:
-31 ° C to 63°C ( -25 ° F to 145°F) 0 to 95 % (non-condensing) Suitable for outdoor use (IP65 rated)
110mm L x 75mm W x 15mm D (4.3 in x 2.95 in x 0.59 in) 105 g (0.23 lbs)
-
SOFTWARE CONTROLLER READER ACCESSORIES
125KHz EM Card/ 13.56 MHz Mifare Card
Read range up to 10 cm (EM) / up to 5 cm (MIFARE)
26/34 bit Wiegand (default)
Easy to install on Metal Door Frame Mullion.
External LED
control
External buzzer control.
Indoor/ Outdoor
Operation Solid Epoxy Potted
Waterproof IP65
Reverse Polarity
Protection
This new, rigid and reliable unit provides the
capability to read Mifare® Smartcard Contactless cards with any standard access control system. The AY-Y25 is fully potted, sealed and made of a rigid, UV resistant poly-carbonate, which makes it highly suitable for outdoor use. With a maximum range of 5cm, it makes a very simple, reliable and cost effective way to upgrade your system to Smartcard standard.
www.falco-ecom.com
AY-Y20/ AY-Y25
F A L C O
-
Model AY-Y20 AY-Y25
Read Range
10 cm
5 cm
Reading Time (Card)
300ms
Power /Current
DC 6-14V/ Max.70mA
Input Port
2ea ( External LED Control, External Buzzer Control )
Output Port 26 bit Wiegand 34 bit Wiegand
LED Indicator
2 Colour LED Indicators (Red & Green)
Beeper
Yes
Operating Temperature
-20 °C to +65°C
Operating Humidity
10% to 90% relative humidity non condensing
Colour
Black
Index of Protection IP65
Technical Specification
-
Accuracy,Reliablity &
Convenient...our AY-F7
FingerprintReader
-
Product Introduction
AY-F7 is a widely used Access Control in the office. choosing a lot of stable originalparts, strictly follow the national security product standard .AY-F7 is suitable for theentrances and exits of office, factory ,hotel ,school ,etc .All input /output are usinganti-jamming protection and over-voltage/circuit protection. The product experiencesthe strict degradation test before leaving factory. The biggest advantage of AY-F7 iseasy to install, with multifunctional & elegant design and reasonable price.
Benefits
• One fingerprint develop the whole world • Adopt high reliable industrial component parts and optical sensor, watchdog
monitor to avoid unit hang ,unique reset key keeps the unit well work • Easy to install all the cable connection EM lock installation are same to the
traditional IC/ID Access control
Technical Specification
• User capacity : 500• Transaction capacity : 30,000• Verification mode : 1:1 or 1:N• Access Control :support standalone work & network with Falco IP controller• Electric lock control: Directness relay out put 3A/12VDC • Communications (Baud Rate): TCP/IP (10MB/s) or RS232(115200) and RS485(115200)• Keyboard and Display: LCD with 80 character and figure keypad• Power: 9-24 VDC, stay current: 50mA, work current: 400mA• Identification speed:
-
LCD Keypad Reader With Built-in TCP/IP Controller
General Description
LCD Keypad reader is an advanced Multi-format RFID Proximity reader with LCD displays and keypad input with built-in TCP/IP controller. There are two model where you can select either RFID card format or MIFARE card format
It is design with easy mounting and hidden screws and wires. With LED indicator that is easily viewable on the front panel, user able to view the status of doors. With built-in internal buzzer, user is able to hear and notice the status of the doors.
Product Specification
Manufacturer : FALCOCountry of Origin : Malaysia Usage : 4 X 16 alphanumericBacklight : yes Power Input : 12V DC, 500mAChassis Colour : Beige Dimension : 11.5cm X 15.8cm X 3.0cmRead Range : 3.0 – 5.0 cmKeypad : 3 X 4 keypadMode of Operation : Card Only, Card + Pin, Pin OnlyOperating Temperature : 0 C to 60 CHumidity : 10% to 90% non-condensingCard Reader type : Proximity (model : PEM5008) , MIFARE (model : PMM6008)
HID (model : PHM7008)Output format : Weigand 26 bit, 34 bitRF Modulation : ASK at 125kHz, 13.56MHzBuilt in Internal Buzzer : Yes
-
• Few features are included in the FALCO time attendance software such as:- Store employee’s personal information such as name, card number, department,
hired date, address, phone numbers and date of birth.- Generate various time attendance reports to assist in payroll and overtime
calculation. Provides various printouts for ease in calculations of payroll andovertime. The printout maybe in either a softcopy or a hardcopy.
Feature
• ApplicationsCan be used for access control, time attendance clocking, guard tour & intrusion alarm arming/ disarming.
• Access ControlIt can be configured for physical access control of doors, elevators & car parks. The integral keypad is used when access to a high security area is required, and users also have to enter his PIN code for access. Exit card reader used for access control is connected to the entry reader, and has 1Led for visual indication.
• Time Attendance ClockingMost models of the card readers can be configured for time attendance clocking only, or combined with an access control. Using a common ID card, user can both access a controlled door and at the same time 'clock-in or 'clock-out' his attendance at work.
Overview
• LCD module with built-in TCP/IP controller as an extra feature for displays. From the LCD module you can use it to displays the date and time for the user to know their actual prox In time.
• This is suitable for time attendance where it can displays the time for the user when they prox In and Out.
Key Highlights
• Time Attendance Package using LCD module.• Display Date and Time for ease of use for
time attendance software.• Displays greetings that you set from PC.
-
MR3820b 2.4GHz Active Tag
The Microwave 2.4 GHz Active Tag is used to identify and/or perform micro-localization of
items or persons; The tag have integrated Microwave Technology, incorporating
Microwave(2.4GHz) Technology. It can be read by long range readers as well as short range by
inductive antenna. It is built around innovative 0.18 um low-power CMOS integrated circuits.
This high scale of integration allows for very compact and low-power performance. The unique
more than 2 years battery lifetime is achieved without sacrificing the reading range.
Specifications: Range: 3~80 m (2.4GHz) Battery Life: 2 years
Frequency: 2.4GHz, the Industrial,
Scientific and Medical (ISM) frequency band.
Operation: Read only with a unique
customer specific security code and a customer
tag ID number.
Weight: 20g ataD Rate: 1Mbps
Average Power: 12~18uA, 3V Anti-collision: 100 tags are read
simultaneously
Dimension: 75*54*4mm RF Output Power: 0dBm
Storage temperature: -40 C to 80 C, Working temperature: -20 C to 60 C,
Relative humidity: 5% to 98% or 100%
moisture proof. Sensitivity: -90 dBm
Supply current in Power Down mode: 3 uA
-
Fingerprint Terminal (VIRDI 3000)
Product Description
Various and powerful application programs are designed for your successful business. It is well fitted for your access control and time & attendance management to be safety, cost-effectiveness and centralizing.
Product Feature
-Intelligent fingerprint image capture technology for dry and damp finger -Fast 1:N identification and 1:1 verification matching speed -Numerous template and event log capacity -stand-alone or networked operation(TCP/IP) -Built-in auto sensing technology to extract fingerprint without pressing any button -Built-in fake fingerprint detection technology -Configurable security level per user for registration and authentication -Real time monitoring and log data management -Compatible with access control and T&A management S/W -Friendly operation guidance by LCD and voice -Compatible with audio door phone to check visitor
Product Specification / Models
-
Specification VIRDI 3000 CPU 32 Bit RISC CPU
Template Capacity Dafault (4M): 7,040 Option (8M): 16,320
Template Size 400 Bytes per template
RF reader N/A
LCD display 122 × 32 Graphic Display LCD
Keypad & button 16 key numeric & Function keypad plus additional
buttons (Enter and Call)
LED indicator/Buzzer
2 LED / 1 Buzzer
Camera N/A
Additional Ports test
Communications 10 Base-T (TCP/IP) for FPSVR (sever program), 2 RS-232C and Wiegand, (1 RS-485 : optional)
Power Consumption Max DC 12V / 450mA
Operation Environment
-20 ~ 50℃ / Lower than 90% RH (Non-condensing)
Standards Compliance
Sensor Type Optical
Sensing Area 13 × 15 mm
Resolution 500 dpi
Verification (1:1) Time