mini CameraUser Guide

1

User Guide mini Camera pg1

Unpack the contents of the Kaiser Baas mini Camera package. You should have the mini Camera device, User guide, CD, USB cable, Silicon case, Waterproof case, Bracket holders, Clip holder, Elastic strap and Lanyard.

2Insert a formatted Micro-SD card into the Micro-SD card slot. The ‘on/off’ switch should be in the ‘off’ position.

ON

OFF

3Connect the mini Camera to your computer using the provided USB cable to charge the Lithium battery. You will see a green LED and a flashing yellow LED. The yellow LED will stop flashing when the battery has finished charging. A full charge will take 3 to 4 hours.

pg2User Guide mini Camera

4To set the correct time and date, insert the provided CD and run the ‘WriteTime’ program. You will see the following screen –

The mini Camera will appear as a drive letter in ‘Devices’. Click the ‘Update’ button to set the time and date and click ‘Quit’ to close.

* Program is Windows compatible only.

OnCharging

Battery Status

Charged

pg3User Guide mini Camera

OFFPowerON

Vid

eo

Phot

oModeMicro SD

/

OFF

Power ON

Video

Photo ModeMicro SD

/

1

3

4

OFF

Power

ON Video

Photo

Mod

eM

icro

SD

/

5 1 On / off

2 Mini USB port

3 Micro-SD card slot

4 Video / photo mode

5 Record / stop

2

To turn on the mini Camera, put the ‘on/off’ switch to the ‘on’ posi-tion and then press the ‘record/stop’ button. You will see a green, yellow and blue LED. The blue LED will turn off once initialised –

pg4User Guide mini Camera

mini Camera Operation

Video capture

OFF

Power

ON Video

Photo

Mod

eM

icro

SD

/

To capture video, select ‘video’ mode then press the ‘record/stop’ button. The blue LED will start to blink to indicate that video capture has started –

To stop capture, press the ‘record/stop’ button again. The blue LED will stop blinking to indicate that video capture has stopped.

OFF

Power

ON Video

Photo

Mod

eM

icro

SD

/

To take a snapshot select ‘photo’ mode. The yellow LED will start to blink to indicate that you are in snapshot capture mode –

To take a snapshot, press the ‘record/stop’ button. The blue LED will turn on momentarily and then turn off when the snapshot has been saved. Do not move the mini Camera during this time.

pg5User Guide mini Camera

Snapshot capture

To access the video and snapshot files, connect the mini Camera to your computer with the supplied USB cable. The mini Camera will act as a Micro-SD card reader so you can access the files. The video files are located in the ‘VIDEO’ folder and the snapshot files are in the ‘IMAGE’ folder.

*Please note, the mini Camera will automatically turn off if there is no activity after 2 minutes to conserve power. It will also automatically turn off when the memory card has reached its capacity during capture or if the battery power is low. When the memory card has reached its capacity, the blue LED will flash briefly when the ‘record/stop’ button is pressed

Accessing the recorded files

pg6User Guide mini Camera

Mini Camera Specifications

• Camera: 2.0 mega pixel CMOS, wide angle lens,

1Lux illumination

• Video resolution: 1280 x 720 (30fps)

• Video format: AVI (MPEG-4)

• Audio format: PCM

• Image resolution: 1600 x 1200

• Image format: JPG

• Power source: Built-in rechargeable Lithium battery,

270mAH capacity

• Power consumption: 180mA / 3.7V

• Waterproof depth: Up to 20 metres

Frequently asked questions

Q. I have turned the device on and then inserted the Micro-SD card, I pressed the record button but it is not workingA. You have to insert the Micro-SD card before turning the device on

Q. I have recorded video but it is not playing back correctlyA. A class 4 or class 6 Micro-SD card is required for smooth video capture

Q. What is the maximum capacity memory card that I can use?A. The maximum capacity Micro-SD card supported is 16GB

Q. How long does the battery last?A. The built-in Lithium battery will last for 80 minutes on a full charge

www.kaiserbaas.com/support