MINERAL PROPERTIESMINERAL PROPERTIESPrepared by Dr. F. Clark,Prepared by Dr. F. Clark,

Department of Earth and Atmospheric Department of Earth and Atmospheric Sciences, University of AlbertaSciences, University of Alberta

Sept. 05Sept. 05

CLEAVAGECLEAVAGE

A mineral has cleavage if it has one or more A mineral has cleavage if it has one or more directions or planes of weakness within the crystal directions or planes of weakness within the crystal structure along which it will break when stressed. structure along which it will break when stressed. Because of the regular, ordered arrangement of Because of the regular, ordered arrangement of atoms that crystals have, this means that the same atoms that crystals have, this means that the same cleavage will repeat many times within the same cleavage will repeat many times within the same crystal. Because a mineral is defined in part by its crystal. Because a mineral is defined in part by its crystal structure, cleavage is a consistent and crystal structure, cleavage is a consistent and reliable property for identification. As well, when a reliable property for identification. As well, when a mineral has more than one cleavage, those mineral has more than one cleavage, those cleavages will always intersect at the same angles. cleavages will always intersect at the same angles. Breakage of a crystal unrelated to a cleavage is Breakage of a crystal unrelated to a cleavage is called fracture.called fracture.

MuscovitMuscoviteeThis sheet This sheet silicate has a silicate has a single perfect single perfect cleavage, cleavage, accounting accounting for its flaky for its flaky nature.nature.

The yellow stars are on parallel cleavage faces that all represent The yellow stars are on parallel cleavage faces that all represent the same cleavage direction; the red arrows point to places where the same cleavage direction; the red arrows point to places where that same cleavage could be developed; the blue arrows point to that same cleavage could be developed; the blue arrows point to cleavage flakes that have fallen off the specimen and reflect light.cleavage flakes that have fallen off the specimen and reflect light.

MuscoviteMuscovite

The cleavage flake balanced on the main specimen can itself be cleaved on progressively finer and finer scales (see red arrows). Nevertheless, it is a single cleavage because it represents a single direction in the crystal (see all five surfaces highlighted by yellow stars).

HaliteHaliteThis mineral This mineral exhibits exhibits three three cleavages cleavages that are that are mutually mutually perpendiculaperpendicular. This is r. This is called cubic called cubic cleavage, cleavage, and produces and produces rectangular rectangular specimens.specimens.Faces or portions of faces following the three cleavage Faces or portions of faces following the three cleavage directions corresponding to the stars on the right-hand directions corresponding to the stars on the right-hand specimen are highlighted by arrows; note that cleavages exhibit specimen are highlighted by arrows; note that cleavages exhibit steps corresponding to one of the other cleavage directions.steps corresponding to one of the other cleavage directions.

GalenaGalenaThis metallic, This metallic, lead-bearing lead-bearing sulphide sulphide exhibits exhibits cubic cubic cleavage cleavage (three that (three that meet at 90 meet at 90 degrees) just degrees) just as was seen as was seen for halite.for halite.

The discontinuous nature of cleavage is particularly well displayed by The discontinuous nature of cleavage is particularly well displayed by these specimens; note the large number of short steps and disruptions these specimens; note the large number of short steps and disruptions to the cleavage faces, such that they are recognized as representing to the cleavage faces, such that they are recognized as representing the same cleavage only by virtue of reflecting light the same.the same cleavage only by virtue of reflecting light the same.

CalciteCalciteLike halite Like halite and galena, and galena, this exhibits this exhibits three three cleavages, cleavages, but they do but they do not meet at not meet at 90 degrees; 90 degrees; this is called this is called rhombic rhombic cleavage.cleavage.

The three cleavage directions are marked with their own distinctively The three cleavage directions are marked with their own distinctively coloured stars; notice that many faces have faint lines or traces on coloured stars; notice that many faces have faint lines or traces on them, marked by appropriately coloured arrows, where the them, marked by appropriately coloured arrows, where the corresponding cleavage would develop if the specimens were struck.corresponding cleavage would develop if the specimens were struck.

PotassiuPotassium m FeldsparFeldsparThis mineral This mineral has two has two cleavages cleavages that meet at that meet at 90 degrees, 90 degrees, giving giving squared squared edges to the edges to the specimen.specimen.Highlighted by red arrows, one cleavage is expressed as several faces Highlighted by red arrows, one cleavage is expressed as several faces that are catching the light at the same time; the green arrows that are catching the light at the same time; the green arrows highlight the second cleavage (note that a small ridge is produced on highlight the second cleavage (note that a small ridge is produced on the first cleavage); faces marked by blue stars show irregular fracture.the first cleavage); faces marked by blue stars show irregular fracture.

Potassium FeldsparPotassium Feldspar

There are two sets of planar cleavage faces developed on this crystal, one highlighted in green arrows, the other with red arrows; they meet at right angles. The face highlighted by a blue star exhibits irregular fracture; the steps or discontinuities in the cleavage planes (blue arrows) exhibit the same irregular fracture.

QuartzQuartzThis is a very This is a very common common mineral that mineral that has no has no cleavages, cleavages, but exhibits but exhibits distinctive distinctive conchoidal conchoidal fracture.fracture.

Blue arrows point to the characteristically curved ridges that develop Blue arrows point to the characteristically curved ridges that develop with this type of fracture; quartz typically grows as a hexagonal with this type of fracture; quartz typically grows as a hexagonal prism, with triangular faces at the end of the prism (see specimen on prism, with triangular faces at the end of the prism (see specimen on right); crystal faces should not be confused with cleavage or fracture.right); crystal faces should not be confused with cleavage or fracture.

QuartzQuartzThese three These three specimens, specimens, consisting of consisting of several several crystals crystals each, lack each, lack any trace of any trace of planar planar surfaces, surfaces, either crystal either crystal faces or faces or cleavages.cleavages.Although quartz ideally and characteristically grows as long, six-Although quartz ideally and characteristically grows as long, six-sided prismatic crystals, it commonly occurs as irregular aggregates sided prismatic crystals, it commonly occurs as irregular aggregates that fill fractures in rocks to produce bright white vein fillings that that fill fractures in rocks to produce bright white vein fillings that show up against the darker background of the host rock.show up against the darker background of the host rock.

LUSTRELUSTRE

Lustre is a qualitative description of the appearance Lustre is a qualitative description of the appearance of reflected light from the specimen. It can be of reflected light from the specimen. It can be somewhat subjective, and may also depend on somewhat subjective, and may also depend on the quality of the specimen and the crystal size. the quality of the specimen and the crystal size. The fundamental subdivision is into those The fundamental subdivision is into those minerals whose lustre is metallic, having the minerals whose lustre is metallic, having the appearance of polished metal, and those that are appearance of polished metal, and those that are non-metallic, which of course do not. There is a non-metallic, which of course do not. There is a host of different lustres within the non-metallic host of different lustres within the non-metallic category.category.

Metallic LustreMetallic Lustre

In the left photo, all three specimens are of the mineral pyrite, an iron sulphide commonly known as Fool’s Gold. In the right photo, the left specimen is pyrrhotite, also an iron sulphide, the center specimen includes bornite, a copper-plus-iron sulphide, and the right specimen is pyrite.

Galena Galena + + DolomiteDolomiteThe contrast The contrast between between metallic and metallic and non-metallic non-metallic lustre is lustre is exhibited in exhibited in this this specimen specimen from Pine from Pine Point.Point.From this lead-zinc deposit near Great Slave Lake, metallic galena, From this lead-zinc deposit near Great Slave Lake, metallic galena, highlighted by red arrows, has been deposited in cavities within the highlighted by red arrows, has been deposited in cavities within the brown, non-metallic dolomite host rock. The two left arrows point to brown, non-metallic dolomite host rock. The two left arrows point to the same large mass of galena; the right arrows to smaller masses. the same large mass of galena; the right arrows to smaller masses.

Halite + Halite + GalenaGalenaBoth Both minerals minerals exhibit cubic exhibit cubic cleavage, as cleavage, as highlighted highlighted by the three by the three sets of sets of arrows.arrows.

Placing non-metallic halite (left) next to metallic galena (right) Placing non-metallic halite (left) next to metallic galena (right) simply highlights the fact that minerals may share one or simply highlights the fact that minerals may share one or more properties with others. It is the combination of at least a more properties with others. It is the combination of at least a few properties that allows us to uniquely identify minerals.few properties that allows us to uniquely identify minerals.

COLOURCOLOUR

Colour is an obvious property, but one which is often Colour is an obvious property, but one which is often unreliable. Because of the variation in chemistry unreliable. Because of the variation in chemistry that is possible for many minerals, plus the that is possible for many minerals, plus the inclusion of trace elements in the crystal structure inclusion of trace elements in the crystal structure which have a characteristic interaction with light which have a characteristic interaction with light and cause distinctive colours, for many minerals and cause distinctive colours, for many minerals the colour is highly variable. When the mineral is the colour is highly variable. When the mineral is reduced to powdered form, which is done by reduced to powdered form, which is done by dragging the specimen across an unglazed dragging the specimen across an unglazed porcelain streak plate, this variability disappears, porcelain streak plate, this variability disappears, and we get a consistent result which is reliable. We and we get a consistent result which is reliable. We note that certain minerals do have a consistent and note that certain minerals do have a consistent and characteristic colour.characteristic colour.

Quartz Quartz or Silicaor SilicaAll specimens All specimens are are composed of composed of silica (SiOsilica (SiO22), ), either as either as quartz, or as quartz, or as other other materials materials with a with a different different crystal form.crystal form.For many minerals, colour is not a consistent and reliable feature, For many minerals, colour is not a consistent and reliable feature, and other properties must be used to identify them. Observe the and other properties must be used to identify them. Observe the several different colours the same mineral may have, usually several different colours the same mineral may have, usually controlled by trace elements in the crystal structure.controlled by trace elements in the crystal structure.

Colour Variations in SilicaColour Variations in Silica

On the left, we see various examples of Tiger’s Eye, an attractive stone produced by the formation of silica mimicking the structure of a fibrous, so-called asbestos mineral. On the right, the distinctive purple variety of quartz called amethyst is seen; the colour results from the presence of iron in a particular state.

HematitHematiteeThis iron This iron oxide mineral oxide mineral exhibits a exhibits a number of number of different different colours, and colours, and even degrees even degrees of metallic of metallic lustre.lustre.

The upper right specimen is distinctly red-brown, and rather The upper right specimen is distinctly red-brown, and rather dull; the upper left specimen a somewhat dull gun-metal grey dull; the upper left specimen a somewhat dull gun-metal grey colour, and the lower specimen is quite shiny and also a gun-colour, and the lower specimen is quite shiny and also a gun-metal colour. What property unites these specimens?metal colour. What property unites these specimens?

HematitHematiteeA variable A variable mineral is mineral is consistent in consistent in one regard.one regard.

Note that the streak of all three specimens is red-brown, as seen on Note that the streak of all three specimens is red-brown, as seen on the unglazed porcelain streak plates next to each one. Powdering the the unglazed porcelain streak plates next to each one. Powdering the specimen on such a plate (the hardness must be less than 7 for this specimen on such a plate (the hardness must be less than 7 for this to work) eliminates the variation exhibited by the larger crystal sizes.to work) eliminates the variation exhibited by the larger crystal sizes.

SPECIFIC GRAVITYSPECIFIC GRAVITY

Specific gravity is the ratio of the density of a Specific gravity is the ratio of the density of a material to the density of water at a specified material to the density of water at a specified temperature, and therefore has no units or temperature, and therefore has no units or dimension. It can be determined accurately using dimension. It can be determined accurately using various techniques, and resolution between various techniques, and resolution between minerals is possible to very small differences. In minerals is possible to very small differences. In practice, in hand specimen it is not possible to practice, in hand specimen it is not possible to resolve most minerals, whose specific gravity lies resolve most minerals, whose specific gravity lies in the range of 2.65 to 2.85 or so, but a few in the range of 2.65 to 2.85 or so, but a few minerals are unusually “hefty” (have a very high minerals are unusually “hefty” (have a very high specific gravity), and this will be readily detected in specific gravity), and this will be readily detected in specimens which are unusually heavy for their size.specimens which are unusually heavy for their size.

Specific Gravity, Specific Gravity, (or “heft”, if you will)(or “heft”, if you will)

On the left, its three cleavages highlighted by arrows of different colours, is galena, PbS, the ore mineral for lead. On the right is the mineral barite, BaSO4, which is ground up as an additive to drilling fluid or mud, to give the mud sufficient weight to control high pressure formation fluids when drilling exploration wells.

CRYSTAL HABITCRYSTAL HABIT

Crystal habit is the shape that crystals of a Crystal habit is the shape that crystals of a particular mineral will exhibit when grown under particular mineral will exhibit when grown under ideal or favourable conditions. Normally, ideal or favourable conditions. Normally, simultaneous growth of other crystals of the same simultaneous growth of other crystals of the same or a different mineral will lead to mutual or a different mineral will lead to mutual interference and the development of what are interference and the development of what are called compromise boundaries. As the term called compromise boundaries. As the term “habit” suggests, this is not an invariant property, “habit” suggests, this is not an invariant property, and one notes that some minerals may exhibit and one notes that some minerals may exhibit different habits depending on the conditions and different habits depending on the conditions and circumstances of growth.circumstances of growth.

Crystal Crystal Habit, Habit, Quartz.Quartz.This broken This broken crystal crystal demonstratedemonstrates part of the s part of the typical habit typical habit of this of this mineral.mineral.

Under ideal conditions, a quartz crystal grows as a six-sided or Under ideal conditions, a quartz crystal grows as a six-sided or hexagonal prism, and terminates with a set of faces, seen hexagonal prism, and terminates with a set of faces, seen here, that form a hexagonal pyramid.here, that form a hexagonal pyramid.

Crystal Habit, CalciteCrystal Habit, Calcite

The sample on the left exhibits two habits for calcite, one as large, almost clear crystals, the other as very fine, virtually opaque crystals comprising the spaghetti-like masses. On the right, we see a specimen which exhibits another habit for calcite, as scalenohedral crystals (see reflective crystal in center of image in particular).

OTHER PROPERTIESOTHER PROPERTIES

There are other properties that help us identify There are other properties that help us identify minerals, a few of which are illustrated and/or minerals, a few of which are illustrated and/or discussed on the following slides. Opacity refers discussed on the following slides. Opacity refers to the degree to which the specimen will transmit to the degree to which the specimen will transmit light. If a mineral is transparent, light readily light. If a mineral is transparent, light readily passes through it; if it is translucent, one gets a passes through it; if it is translucent, one gets a vague impression or shadow of an object on the vague impression or shadow of an object on the other side of the specimen. If the mineral is other side of the specimen. If the mineral is opaque, no light passes through it. A few factors opaque, no light passes through it. A few factors control our perception of the opacity of a mineral control our perception of the opacity of a mineral as revealed by a particular specimen.as revealed by a particular specimen.

CalciteCalciteThese three These three calcite calcite rhombs show rhombs show distinct distinct differences in differences in opacity.opacity.

The upper specimen is strongly clouded with all sorts of impurities The upper specimen is strongly clouded with all sorts of impurities and inclusions that have been incorporated in the crystal as it grew; and inclusions that have been incorporated in the crystal as it grew; the lower left specimen is more typical, and the lower right specimen the lower left specimen is more typical, and the lower right specimen is of an exceptional clarity and is a variety called Iceland spar.is of an exceptional clarity and is a variety called Iceland spar.

Double Refraction in Calcite.Double Refraction in Calcite.The exceptional clarity of this specimen of Iceland spar The exceptional clarity of this specimen of Iceland spar demonstrates the fact that for many minerals, the passage of demonstrates the fact that for many minerals, the passage of light through the specimen is influenced by the crystal light through the specimen is influenced by the crystal structure. Specifically, the speed of light varies according to structure. Specifically, the speed of light varies according to its direction within the structure. The net result in this case is its direction within the structure. The net result in this case is that the single dot in the left side image is refracted to that the single dot in the left side image is refracted to produce two apparent dots as the light passes through the produce two apparent dots as the light passes through the crystal. If we rotated the crystal in the second case, the two crystal. If we rotated the crystal in the second case, the two dots would revolve around each other. The right side image dots would revolve around each other. The right side image simply shows the effect with a more complex source.simply shows the effect with a more complex source.

Opacity and Lustre: Influence of Opacity and Lustre: Influence of Crystal SizeCrystal Size

Both images show the mineral gypsum. On the left, the two specimens are large, single crystals that are transparent [opacity] and vitreous [lustre]. On the right, the specimens are composed of thousands of individual crystals each a small fraction of a millimetre; crystal boundaries take over to make the gypsum appear opaque and dull.

Carbonate Minerals: EffervescenceCarbonate Minerals: Effervescence

The minerals calcite [CaCO3, on the left] and dolomite [CaMg(CO3)2, on the right] react with dilute hydrochloric acid. With calcite, the reaction is immediate and brisk, whereas dolomite needs to be powdered to get a sluggish reaction. Both exhibit rhombic cleavage (highlighted by arrows for calcite). The colour difference exhibited by these sets of specimens is not a consistent or reliable distinguishing feature; the hardness for dolomite is slightly higher.