military aircraft composite structures - orbital atk · pdf filefact sheet military aircraft...

2
FACT SHEET Military Aircraft Image: Lockheed Martin F-35 Lightning II Composite Structures FACTS AT A GLANCE Orbital ATK is a proud supplier on the F-35 Lightning II Program. The F-35 is the next generation strike fighter bringing cutting-edge technologies to the battle space of the future. Primed with six decades of composite manufacturing experience, Orbital ATK provides core technologies key to the F-35’s advanced airframe. Today, Orbital ATK applies advanced fiber placement technology to fabricate upper wing skins, lower wing skins, strap and nacelle components for all variants of the F-35. Fiber Placing Wing Skins Final Finishing Engine Nacelles By structural weight, the F-35 is 38% composite Orbital ATK builds nearly 35% or the composites structures for the F-35 Orbital ATK makes the seven-piece upper wing skin, lower wing skins, engine nacelle skins, inlet ducts, and the upper wing strap

Upload: truongdung

Post on 02-Feb-2018

313 views

Category:

Documents


21 download

TRANSCRIPT

Page 1: Military Aircraft Composite Structures - Orbital ATK · PDF fileFACT SHEET Military Aircraft Image: Lockheed Martin F-35 Lightning II Composite Structures FACTS AT A GLANCE Orbital

F A C T S H E E T

Military Aircraft

Image: Lockheed Martin

F-35 Lightning II

Composite Structures

F A C T S A T A G L A N C EOrbital ATK is a proud supplier on the F-35 Lightning II Program. The F-35

is the next generation strike fighter bringing cutting-edge technologies to

the battle space of the future. Primed with six decades of composite

manufacturing experience, Orbital ATK provides core technologies key to

the F-35’s advanced airframe. Today, Orbital ATK applies advanced fiber

placement technology to fabricate upper wing skins, lower wing skins, strap

and nacelle components for all variants of the F-35.

Fiber Placing Wing Skins Final Finishing Engine Nacelles

• By structural weight, the F-35 is 38%

composite

• Orbital ATK builds nearly 35% or the

composites structures for the F-35

• Orbital ATK makes the seven-piece upper

wing skin, lower wing skins, engine

nacelle skins, inlet ducts, and the upper

wing strap

Page 2: Military Aircraft Composite Structures - Orbital ATK · PDF fileFACT SHEET Military Aircraft Image: Lockheed Martin F-35 Lightning II Composite Structures FACTS AT A GLANCE Orbital

©2017 Orbital ATK, Inc. All Rights Reserved. Military Aircraft Structures 2017 Approved for Release 20170209

OrbitalATK.com

Military Aircraft Composites Structures

Orbital ATK applies its 60 years of composites innovation to flight critical, primary hardware on the F-22 Raptor. Using automated fiber placement technology, Orbital ATK fabricates the composite pivot shaft which controls the pitch and roll of the aircraft. Advanced hand layup techniques are used to produce the bypass screens and composite pivot shaft sub-assemblies.

F-22 Pivot Shaft

The THAAD Radar is an X-Band active electronically scanned array Radar. It is the world's largest ground/air-transportable X-Band radar. The THAAD Radar and a variant developed as a forward sensor for ICBM missile defense.

Orbital ATK’s composites innovation was used to field critical hardware such as the THADD Radome. Orbital ATK manufactures the radomes for the radar system using advanced hand layup techniques to achieve stringent performance, reliability and maintainability.

Image: Raytheon

Global Hawk Radome

V-22 Sponsons

B-2 EHF SATCOM Radome

Global Hawk Wing

V-22 Aft Fuselage

LPD Enclosure

CNI Antennas

SH-60 LAMPS Array

F-22 Raptor

THAAD Radome

Assemblies and sub-components

Image: U.S. Air Force