midwest #4,2013
DESCRIPTION
Midwest #4,2013TRANSCRIPT
Dick RohlandCEG CORRESPONDENT
After six years of road construction,crews are closing in on the final year ofwork rebuilding a 15 mi (24 km) stretchof Minnesota highway from two to fourlanes and expressway standards in the far,southwestern part of the state near theIowa border.This road work on Hwy 60 in south-
western Minnesota will be completed inthe fall of 2013. It is coming in at the tailend of a Minnesota Department ofTransportation (MnDOT) decades longprogram to expand the entire, two lanehighway to four lanes between Mankato,Minn., and the Iowa border, a distance of100 mi. (160 km) and stretching acrossmostly agricultural and prairie landscape.By years’ end, only two gaps 18 mi. (29
km) long of two lane highway will remainto widen to four lanes and bring MnDOTinto the final stretch of road improve-ments after nearly 40 years of construc-tion.When the entire road is completed, the
original, narrow two lane highway willmore than double in width to carry four,
13 ft. (21 km) traffic lanes, 9 ft. (14 km)bituminous shoulders on the outside lanesand a 3.5 ft. (6 km) unpaved shoulders onthe inside lanes.Mathiowetz Construction, a family-
run, early 20th century founded companybased in Sleepy Eye, Minn., and R & G
$3.00
4
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
®
MMiiddwweessttEEddiittiioonn
MITA Hosts Conference,
Trade Show...10
Leading Edge Stars on
‘Gold Rush’...14
Inside
Table of Contents ............4
Paving Section ........29-39
Parts Section ............46-47
Excavators & AttachmentsSection......................51-77
Business Calendar ........81
Auction Section ......83-93
Advertisers Index ..........94
February 16, 2013 • Vol. IXX • No.4 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910
www.constructionequipmentguide.comPublished Nationally
Decades Long Minn. RoadUpgrade Nears Completion
A Cat dozer, grader and Mack truck with side dump trailer occupy limited space together on the Hwy 60 worknear Interstate 90 at Worthington, Minn.
Construction employment increased in 139 out of 337metropolitan areas between December 2011 andDecember 2012, declined in 131 and was stagnant in 65,according to a new analysis of federal employment datareleased Jan. 28 by the Associated General Contractors ofAmerica. Association officials noted that growing privatesector demand for new construction projects boostedemployment in a slight plurality of metro areas.“Private sector demand for energy, health care, higher
education and residential construction is having a positiveimpact in a growing number of metro areas,” said KenSimonson, the association’s chief economist.“Unfortunately, construction employment in almost asmany metro areas appears to be suffering from decliningpublic sector demand and a private sector market that isstill well-below peak levels.”Pascagoula, Miss., added the highest percentage of
new construction jobs (42 percent, 1,900 jobs) followedby Haverhill-North Andover-Amesbury, Mass.-N.H. (22percent, 800 jobs); Lafayette, La. (17 percent, 1,100 jobs)and Omaha-Council Bluffs, Neb.-Iowa (16 percent, 3,000jobs). Houston-Sugar Land-Baytown, Texas (17,600
Employment Risesin 139 Out of 337Metropolitan Areas
see EMPLOYMENT page 89see MNDOT page 28
In a major victory sought by the AmericanSubcontractors Association on behalf ofMinnesota’s subcontractors, the state’s SupremeCourt has affirmed limits on risk-shifting based onthe state’s anti-indemnity law (Minn. Stat.§337.02).On Jan. 23, the Supreme Court of Minnesota
reversed an appeals court’s decision that allowed ageneral contractor to shift liability to a subcontrac-tor for damage caused by a general contractor’sown direction of the subcontractor’s work. “Because we conclude that ECI did not qualify
as an additional insured with respect to the pipedamage and that Bolduc cannot be required toindemnify ECI without violating Minn. Stat.§337.02, we reverse,” the high court wrote in itsopinion, reversing the appeals court’s decision inEngineering & Construction Innovations, Inc., v.L.H. Bolduc Co., Inc.In an amicus curiae brief filed on Jan. 13, 2012,
ASA urged the Minnesota Supreme Court tooverturn the appeals court’s decision and protectconstruction firms from being forced to pay for
Subcontractors Celebrate CourtRuling on Risk-Shifting in Minn.
see SUBCONTRACTORS page 46
Scharber
Hosts
Annual
Open
House...18
Page 2 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
PATT
EN C
ONST
RUCT
ION
PROD
UCTS
Call 877-688-2228Fax: 630-279-9243
www.pattencat.comComplete inventory available online
CALL 887-688-2228 INVENTORY CHANGES DAILY
ID# UE1811 $210,000
ID# N5791 $143,000
ID# UE1740 $149,000
ID# UE1788 $23,500
ID# UE1737 $56,000
YOURPREFERREDMIDWEST
USEDCAT
DEALER
YOURPREFERREDMIDWEST
USEDCAT
DEALER
Cat 226B2, 2009, W2130 NA, EROPS, A/C, Heat ..............$29,000
Cat 236B, 2005, UE1233, EROPS, Heat, Self-Leveling ......$25,000
Cat 252B2, 2008, W1819, EROPS, Heat, 1SPD, QC ..........$29,000
Cat 252B2, 2008, W1822, EROPS, A/C, 1SPD, QC............$29,000
Cat 252B2, 2009, W2083, Cab, QC, 2SPD ........................$30,000
Cat 252B2, 2009, W2087, EROPS, QC, 2SPD ..................$30,000
Cat 252B2, 2010, X0215, Cab, QC, 1SPD..........................$43,000
Cat 252B2, 2010, X0214, Cab, QC, 1SPD..........................$42,000
Cat 252B2, 2010, X0213, EROPS, QC, 1SPD ....................$45,000
Cat 289C, 2009, W2153 NA, Cab, A/C, Hyd QC ................$59,000
Cat 289C, 2009, W2115, EROPS, Heat, Hyd QC................$57,000
Cat 289C 2AIRH, 2009, X0003, EROPS, A/C, QC ..............$49,000
Cat 299C, 2008, W1968, EROPS, A/C, Hyd QC ................$50,000
Cat 299C, 2009, W2063, EROPS, A/C, Q/C........................$45,000
John Deere 320D, 2011, UE1603, EROPS, Bkt ................$29,900
CAT D4HIIIXL, 1996, UE1788, OROPS ..............................$23,500
Cat D5K LGP, 2008, N5803, Cab, 3rd Valve ....................$100,000
Cat D6K LGP, 2009, N6127, Cab, 4th Valve ....................$178,000
Cat 308DCR HMR, 2009, W2107 NA, EROPS, QC ..................$86,000
Cat 320DL, 2008, UE1565, Cab, A/C, Boom 18’7”, Stick 9’6” $169,000
Cat 325CL, 2004, UE1713, Cab, Stick 10’6”, QC ......................$97,500
Cat 328DLCR, 2007, UE1811, A/C, Q/C ..................................$210,000
Cat 328DLCR, 2008, UE1518, Cab, QC............................$290,000
Cat 303CCR, 2008, W1865, Cab, A/C ................................$32,000
Cat 303.5CCR, 2007, UE1793, Aux Hyd ..............................$23,600
Cat 336DL, 2010, X0221, Cab ........................................$285,000
SKID STEERS
EXCAVATORS
DOZERS
Luke [email protected]
Miguel Lozano630-279-4400 (Español)
Cat CB34XW, 2008, UE1730, OROPS ................................$48,000
Cat CB32, 2009, N5975 ....................................................$42,000
Cat CB14, 2009, N5970 NA, Water Spray..........................$24,000
Cat CB14, 2009, X0285, Water Spray ................................$24,000
Cat CB24, 2010, X0152, FOPS, Wide Drum ....................$125,000
Cat CB54, 2010, X0294, ROPS/FOPS......................................$167,930
Cat CB-534C, 1998, UE1764, OROPS................................$25,000
Cat CP56, 2008, N5791, OROPS, Padfoot ......................$143,000
Cat CS54, 2008, N5757, OROPS, Sm Drum ......................$95,000
Cat CS54, 2009, N6078, Smooth Drum ............................$95,000
Cat CS54, 2009, N6085 NA, Smooth Drum ......................$95,000
Cat TL1055, 2008, N6124, EROPS, A/C ............................$80,000
Cat 953D, 2008, N5790, EROPS, 2.25 CYD GP Bkt ........$179,000
Cat 430 EX4, 2006, UE1737, Cab, Heater, A/C ..........................$56,000
Cat 906H, 2009, W1951 NA, Cab, A/C, Heat......................$69,000
CAT 907H, 2010, X0022, Cab ............................................$92,000
Cat 924H, 2007, N5786, EROPS, Heat, A/C, 2.6 CYD Bkt$105,000
Cat 930H, 2009, N6195, Cab, QC, Ride Ctrl ....................$157,000
Cat 924H, 2008, N5868, Cab ..........................................$109,000
Cat 924HZ, 2008, N5875, Cab, A/C, Heat ........................$112,000
CAT 938H, 2009, UE1723, EROPS, A/C, QC............................$179,000
Cat 950H, 2009, N6201, Cab, A/C, Heat ..................................$265,000
Cat 966H, 2008, UE1600, Ride Control ..............................$268,500
Cat 950G, 1999, UE1780, Bucket 3.75 CYD ......................$72,200
Cat 980GII, 2003, UE1724, EROPS, Ride Control............$144,000
Cat 988H, 2007, UE1688, EROPS, Rock Bkt, 9.0 CYD ....$260,000
WHEEL LOADERS/LOADER BACKHOES
TRACK LOADERS
TELEHANDLERS
COMPACTION
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 3
Illinois Truck & Equipment 320 Briscoe Drive Morris, Illinois 60450 www.iltruck.comToll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected]
Including: 100 Hydraulic Excavators
Long Reach Excavators
50 Bulldozers
50 Wheel Loaders
Mantis Cranes 18-70 Ton
30 Articulated Dump Trucks
On/Off Road Water Trucks
• Angle Blades & Winches Available
Page 4 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changesto Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Contents Copyrighted ©2013, by Construction Equipment Guide, which is a Registered Trademark, registered in theU.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from the publisher. All editorial material, photo-graphs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyrightpurposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially.Contributor articles do not necessarily reflect the policy or opinions of this publication.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is notresponsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used inadvertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occasion-ally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any advertising.
IN THIS ISSUESPECIAL SECTION…EXCAVATORS AND ATTACHMENTSBe sure to check out this special section! Keep up to date with the latest information on excavators and attachments.
FEATURES…MITA HOLDS ‘BUILDING BETTER, BUILDINGSMARTER’ CONFERENCEThroughout the course of the three-day event, breakout sessions wereconducted covering topics ranging from the infrastructure funding debateto truck regulations to the future of bonding.
LEADING EDGE ATTACHMENTS STARS ONDISCOVERY’S ‘GOLD RUSH’Gold Rush is probably the only reality show heavily featuring constructionequipment from a parade of manufacturers such as Caterpillar, Volvo andKomatsu.
NEARLY 700 ATTEND SCHARBER & SONS ANNUALPUBLIC, PRIVATE SECTOR EVENTAs in the past with the company’s open house, Scharber & Sons invitedmembers of the Minnesota State Patrol to make a safety presentation oncommercial truck regulations.
MURPHY TRACTOR & EQUIPMENT CO. TOREPRESENT DOPPSTADT US IN MIDWESTIt currently represents Doppstadt in Kansas, Nebraska, Iowa and westernMissouri, and will now carry this product line at the following stores inColumbus, Cincinnati, Vandalia, Lima, Chillicothe and Cambridge, Ohio, andCranberry Township and Delmont, Pa.
FABICK CAT ANNOUNCES 2013 LANDSCAPINGINDUSTRY DAYSFabick CAT will host the 2013 Landscaping Industry Days in the newaddition to its Fenton, Mo., facility March 14 to March 15.
ALEX LYON & SON KICKS OFF SUNSHINESTATE AUCTIONS This year marked Alex Lyon & Son’s 20th annual Sunshine State auction. Awide variety of equipment went on the block from Feb. 2 through Feb. 10,with each day featuring more than 1,000 lots of equipment.
LAHOOD TO LEAVE; ANOTHER VACANCY INOBAMA CABINETThe former congressman from Illinois and one of only two Republicanswho served in Obama’s Cabinet, Ray LaHood worked for more safety inthe air and on the ground and pushed for improvements of roads andbridges.
50
45
18
14
10
51
78 CLASSIFIEDS81 BUSINESS CALENDAR83 COMING AUCTIONS
EQUIPMENT…29 BERGKAMP M216 Trailer Mounted Paver44 VOLVO Articulated Haulers
10
14
18
86
MIDWEST EDITIONCirculated Throughout • North & South Dakota • Nebraska
• Kansas • Minnesota • Iowa • Missouri• Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky
Founder, Publisher & CEO Edwin M. McKeon Sr.Midwest Publisher Joseph S. McKeon
Editor In Chief Craig Mongeau Associate Editor Christine Reckner
Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton
Controller Tom WeinmannCirculation Mgr. Cathy Printz
Main office 470 Maryland Drive Fort Washington, PA 19034
215/885-2900 Toll Free 800/523-2200
Fax 215/885-2910Web site www.constructionequipmentguide.com
Editorial e-mail [email protected] e-mail [email protected]
For advertising rates Contact Joseph S. McKeon
•Illinois • Wisconsin • Northwest Indiana
• Missouri • Kansas
773/769-4090Toll Free 800/632-0233
Fax 773/769-4280e-mail [email protected]
Contact Ed Bryden• Central and Eastern Indiana • Michigan • Ohio
• Kentucky
440/268-9690Toll Free 800/810-7640
Fax 440/268-9691e-mail [email protected]
Contact Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota
• South Dakota
952/353-1770Toll Free 866/413-4265
Fax 952/353-2750e-mail [email protected]
51
86
92
®
Mobile LinkedIn Facebook Twitter YouTube
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 5
Blaw Knox PF115, ’89 ..................................................................$11,500LeeBoy 1000D, ’03, 1,475 hrs......................................................$19,500LeeBoy 8500HD, ’06, 2,750 hrs ..................................................$43,500LeeBoy 8500HD, ’10, 2,140 hrs ..................................................$54,500LeeBoy 8500HD, ’00, 2081 hrs ....................................................$19,500LeeBoy 8500LD, ’00, 1,991 hrs....................................................$29,500LeeBoy 8500LD, ‘03, 3683 hrs ....................................................$19,500LeeBoy 8500LD, ’08, 904 hrs ......................................................$79,500LeeBoy 8515, ’06, 2,657 hrs ........................................................$49,500
Cat RM350B, ’02, 6617 hrs ........................................................$117,500Wirtgen W2000, ’03, 2,996 hrs ......................................................$CALLWirtgen W2000, ’96, 9,346 hrs ......................................................$CALLWirtgen WR2000, ’11, 334 hrs ......................................................$CALLWirtgen W2100, ’04, 8,373 hrs ......................................................$CALL
Deere 410J TC, ’09, 403 hrs ........................................................$79,500Komatsu WB140-2N, ’04, 2,805 hrs ............................................$27,500
Komatsu CD60R-1A, ’05, 1,136 hrs ..........................................$109,000Komatsu HD465-5, ’02, 17,763 hrs ................................................$CALLKomatsu HD465-5, ’02, 17,599 hrs ................................................$CALLKomatsu HD465-5, ’02, 17,268 hrs ................................................$CALLKomatsu HD785-5, ’01, 22,508 hrs ................................................$CALLKomatsu HD785-5, ’01, 25,415 hrs ................................................$CALLKomatsu HM400-2, ’07, 7,880 hrs ............................................$199,500Moxy MT31, ’02, 3479 hrs ..........................................................$82,000
Doppstadt SM617, ’09, 290 hrs..................................................$139,000Doppstadt SM720, ’09, 235 hrs..................................................$185,000Doppstadt SM726, ’09, 257 hrs..................................................$225,000
Deere 320D, ’10, 287 hrs ............................................................$32,500Mustang MTL16, ’05, 2,349 hrs ..................................................$18,500
Concept Products CP2000, ’05 ....................................................$13,500
Atlas Copco ROC F9-11, ’10 ..........................................................$CALL
Cat 963C, ’01, 4800 hrs................................................................$74,500Cat D4D, ’72 ..................................................................................$7,000Cat D5G LGP, ’05, 3,150 hrs ........................................................$52,500Cat D5H LGP, ’93, 9961 hrs..........................................................$54,500Cat D8N, ’87 ................................................................................$78,000Dresser TD8E, ’81 ........................................................................$13,000Komatsu D31PX-21A, ’05, 882 hrs ..............................................$52,500Komatsu D37P-5, ’98, 2,624 hrs ..................................................$21,500Komatsu D39PX-21, ’05, 2,059 hrs..............................................$69,500Komatsu D51PX-22, ’08, 2,436 hrs............................................$129,500Komatsu D65EX-15EO, ’08, 1,365 hrs........................................$199,500Komatsu D65PX-15EO, ’06, 3,199 hrs ......................................$146,500Komatsu D65PX-15EO, ’07, 5,159 hrs ......................................$127,500Komatsu D65PX-15EO, ’08, 5,372 hrs ......................................$127,500Komatsu D65PX-12, ‘96, 4,969 hrs..............................................$49,500Komatsu D155AX-5, ’03, 6,809 hrs............................................$224,500
Case CX240B, ’07, 4,810 hrs......................................................$114,500Cat 324DL, ’06, 4,605 hrs ..........................................................$123,500Gradall XL4100, ’08, 3,749 hrs ..................................................$180,000Kobelco SK400LC Mark IV, ’97 ....................................................$38,500Kobelco SK480LC, ’05, 11,858 hrs ..............................................$54,500Komatsu PC50MR-2, ’04, 2,885 hrs ............................................$29,500Komatsu PC78UU-6, ’04, 4,085 hrs ............................................$44,500Komatsu PC88MR-8, ’08, 827 hrs................................................$89,500Komatsu PC88MR-8, ‘09, 1,195 hrs ............................................$92,500Komatsu PC138USLC-8, ’09, 2,363 hrs ....................................$104,500Komatsu PC138USLC-8, ’09, 2,583 hrs ....................................$104,500Komatsu PC150LC-6, ’99, 6,800 hrs ............................................$32,500Komatsu PC160LC-7, ’03, 5,277 hrs ............................................$64,500Komatsu PC160LC-7, ’03, 4,397 hrs ............................................$69,500Komatsu PC200LC-8, ’06, 4,617 hrs ..........................................$132,500Komatsu PC220LC-8, ’09, 4,020 hrs ..........................................$149,500Komatsu PC220LC-8, ’09, 5,789 hrs ..........................................$117,500Komatsu PC300LC-6, ’97, 13,530 hrs ..........................................$29,500Komatsu PC300LC-6, ‘97, 13,350 hrs ..........................................$32,500Komatsu PC300LC-7, ’02, 4,887 hrs ..........................................$134,500Komatsu PC300LC-7, ’06, 9,377 hrs ............................................$94,500Komatsu PC400LC-6LM, ’03, 8,516 hrs ......................................$69,500Komatsu PC400LC-6LM, ’03, 8,760 hrs ......................................$72,500Komatsu PC400LC-6LM, ’02, 10,834 hrs ....................................$72,500Komatsu PC400LC-7, ’04, 9,350 hrs ............................................$99,500Komatsu PC400LC-7, ’04, 10,300 hrs ..........................................$99,500Komatsu PC400LC-7, ’04, 12,499 hrs ..........................................$84,500Komatsu PC400LC-7EO, ’06, 9,833 hrs......................................$109,500Komatsu PC400LC-8, ’07, 2,811 hrs ..........................................$239,500Komatsu PC600LC-6, ’99, 9,634 hrs ............................................$79,500Komatsu PC600LC-7, ’04, 8,449 hrs ..........................................$177,500Komatsu PC600LC-7, ’05, 10,328 hrs ........................................$214,500Komatsu PC600LC-7, ’06, 9,977 hrs ..........................................$185,000Komatsu PC750LC-7, ‘05, 4,517 hrs ..............................................$CALLVolvo EC460, ’04, 10,746 hrs ......................................................$69,500Volvo EC460, ’05, 10,958 hrs ......................................................$69,500
Baker Kurtz 4671 Impactor, ’07..................................................$325,000Hazmag APS1313-K Impactor ......................................................$65,000
Bomag BW130AD, ’88 ....................................................................$3,900Bomag BW205AD, ’02, 3,520 hrs ................................................$34,500Hamm HD13, ’02, 2,937 hrs ........................................................$14,500Hamm HD14VV, ’08, 816 hrs........................................................$32,500Hamm HD14VV, ’09, 2,027 hrs ....................................................$32,500Hamm HD90 Ozzy, ’04, 4,300 hrs ................................................$54,500Hamm HD130, ’03, 1789 hrs........................................................$49,500Hamm HDO90V, ’09, 849 hrs ......................................................$77,500Tramac TR21A Plate (PC160) ........................................................$7,500
Cat 920, ’73, 7216 hrs ....................................................................$7,000Cat 980C, ’86, 7216 hrs................................................................$59,000Komatsu WA200-5, ’05, 617 hrs ..................................................$97,500Komatsu WA250-1, ’95, 17,158 hrs ............................................$29,500Komatsu WA320-6, ’08, 3961 hrs ..............................................$126,500Komatsu WA380-6, ’09, 7,120 hrs ............................................$109,500Komatsu WA400-5L, ’04, 7,169 hrs ............................................$94,500Komatsu WA450-6, ’07, 7,355 hrs ............................................$196,500
Franklin 3000/Stroke Head, ’92 ....................................................$8,500Timbco 415D/Risley, ’00, 8,629 hrs ..........................................$120,000Valmet 415EX/Rolly II, ’05, 10,092 hrs......................................$145,000Valmet 840.2, ’05, 6,600 hrs ....................................................$170,000Valmet 840.3/8, ’06, 9,592 hrs ..................................................$180,000Valmet 840.3/8, ’08, 10,006 hrs ................................................$190,000Valmet 911C/965 Head, ’97 ........................................................$35,000Valmet 911C w/965 Head, ’99 ....................................................$65,000
Austin Western Super 500 ............................................................$7,500Komatsu GD655-3EO, ’09, 1,287 hrs ........................................$189,500
EXCAVATORS
WHEEL LOADERS
FORESTRY
DOZERS
PAVING
MILLING
BACKHOE LOADER
OFF ROAD TRUCKS
GRADERS
ROCK DRILLSCOMPACTION
SKID STEERS
SHREDDERS, TROMMELS
AIR CURTIN DESTRUCTORS CRUSHING, SCREENING
15 Roland Branch Locations in IL, IN, MI, MO, and WI
VISIT
ROLAND MACHINERY.COM
Call Jay Germann (217) 789-7711 • Email: [email protected]
Gradall XL4100, ’08, 3,749 hrs ............$180,000 Komatsu D39PX-21, ’05, 2,059 hrs ........$69,500
Komatsu PC138USLC-8, ’09, 2,583 hrs $104,500 Valmet 840.2, ’05, 6,600 hrs ................$170,000
Financing Available for Qualified Buyers
Quality Used Equipment...with support to back it up
Page 6 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CX130 Excavator
$410/Day, $1,230/Week, $3,690/Month
CX240 Excavator
$700/Day, $2,100/Week, $6,300/Month
CX210 Excavator
$580/Day, $1,740/Week, $5,220/Month
CX460 Excavator
$1,235/Day, $3,705/Week, $11,115/Month
CX160 Excavator
$475/Day, $1,425/Week, $4,275/Month
CX330 Excavator
$875/Day, $2,625/Week, $7,875/Month
CX225 Excavator
$755/ Day, $2,265/Week, $6,795/Month
Excavator Rental Specials
Rent Today!
Clean, reliable equipment Competitive rates Rent by the day, week, or month Delivered to your job site
McCannOnline.com
IllinoisAddison
630-627-0000
Bolingbrook*630-739-7770
Chicago312-942-9200
Crestwood708-597-3110
McHenry*815-385-0420
Wauconda847-526-9444
IndianaSchererville*219-865-6545
* Case authorized dealer location
Serving the Constructor ®
2004 Takeuchi TL130, s/n 21302831, 4500Hrs, ROPS, New Tracks, 67” Smooth Bkt ............................................................$15,500
2005 Takeuchi TL140, s/n 21402024, 4800Hrs, ROPS, Aux Hyds, New Tracks andRollers, 76” Smooth Bkt..................$22,500
2005 Takeuchi TL150, s/n 21502455, 4100Hrs, Cab w/Heat/AC, New Rollers, 80”Smooth Bkt ....................................$29,900
2006 Case CX330, s/n N6SAP7025, 5100Hrs, Cab w/Heat/AC, Boom 21’2”, Arm13’3”, 31.5”-3-Bar Steel Shoes, ControlSelector Valve, Kent Coupler ........$130,000
1994 Case 721B, s/n JEE0039571, 6250Hrs, Cab w/Heat, Pro 1000 ACS Couplerw/2.75 Yd Bkt..................................$38,000
2006 Case 445, s/n N6M438889, 3700 Hrs,ROPS, Two Speed, Block Heater, Single HydSelf Level, 12x16.5 Tires, 73” Bkt ..$18,500
2003 Case 40XT, s/n JAF387813, 850 Hrs,ROPS w/Soft Cab, Heater, 10x16.5 Tires,60” Bkt ............................................$14,900
2005 Takeuchi TB135, s/n 13516545, 2450Hrs, Cab w/Heat and AC, Dozer Blade, 12”and 24” Bkts....................................$31,000
Mark Kruepke • (630) 739-7770Bolingbrook, IL
Contact us at [email protected]
View our complete Used & “Like New” inventoryat McCannOnline.com
McCann Rents a full line of heavy and light constructionequipment. Call us today to supply your next rental.
To2
!morFFre sohoC
C LLLA AS)6688(
WWWW R
MA RO GUOD584 - 0817
BR DESU MOC
WWWW R.
BR DESU . MOC
STARE Q U I P M E N T
LT D .
Call Sales 515-283-2215 • 800-352-54011401 2nd Ave • Des Moines, IA 50314
H CONSTRUCTION EQUIPMENT & SUPPLIESSINCE 1968
CHECK OUT OUR WEBSITE: www.starequip.comDes Moines • Ames • Cedar Rapids • Waterloo
2009 Mustang 2700VSerial #: 02700T00041022, Equipment #:04102223131, 543 Hrs, Vertical Lift Skid Loader,Turbo engine, 2 speed, hand/foot controls, auxiliaryhydraulics, power multi-tach, block heater, 2,700#lift capacity. $34,995
2006 Mustang 2054Serial #: 2054V00007379, Equipment #:0073792309, 3160 Hrs, Skid Loader with 50 HPYanmar diesel engine, cab, heat, and T-bar controls. Unit is in good working condition, sold as is. $13,995
2005 Takeuchi TL150Serial #: 21502433, Equipment #: 5024332324,1348 Hrs, Track Loader with 100+ hp diesel engine,open ROPS, near new bucket, tracks near 65%, andfreshly serviced out of the shop. $29,950
USED SKID STEER BARGAINS
2006 Takeuchi TL140CSerial #: 21404631, Equipment #: 4046312322,4159 Hrs, Track Loader with 80 hp diesel engine,cab, heat & a/c. $22,995
SOLDSOLD
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 7
Please Contact Bob Williams or Jeff Speer 11200 W Silver Spring Rd. Milwaukee, WI 53225
800/353-1944 414/461-9100 www.FABCO.comOutside WI & Upper Michigan Within WI & Upper Michigan Hundreds of machines. Listings updated daily.
2001 Cat 345BL II..................................$69,500S/N AGS00921, 13,744 hours, EROPS, coupler,
GP-bucket, cylinders good, u/c good
2004 Cat 740 ........................................$139,500S/N AXM01570, 7720 Hrs, No Tailgate, Tires Good
1986 Cat D8L ........................................$77,500S/N 53Y04266, 15,980 Hrs, EROPS, Drawbar, SUBlade, U/C 50% Eng & Trans Rebuilt at 11,000 Hrs
1998 Cat IT28G......................................$41,000S/N 8CR01529, 16,143 hours, EROPS, std differentials, bucket, tires 50%
1979 Cat 631D ......................................$29,700S/N 24W02603, 9284 hours, OROPS, tires fair
2006 Cat 966H ....................................$210,000S/N A6G00225, 7734 hours, EROPS, A/C, GP-bkt,
tires good, engine rebuilt at 7422 hours
2011 Cat 262C........................................$33,000S/N MST03900, 2295 Hrs, EROPS, A/C, Hyd Quick
Coupler, 2-Speed, Bkt, Tires Fair
2000 Aljon 81K ......................................$35,000S/N 13728, 13,500 Hrs, EROPS, Trash Blade, Terra
Wheels Good, Pumps Have Been Rebilt
2005 Cat 216B ......................................$16,500S/N RLL02914, 1703 Hrs, OROPS, Manual QuickCoupler, Bkt, Goodyear Rubber Track System
1988 Cat 627E........................................$61,500S/N 6GB00655, 22,447 hours, EROPS, push pull,
retarder, p t guard, tires good
2005 Case 450 ......................................$18,500S/N N5M417832, 3842 Hrs, EROPS, Heat, Hyd, Coupler,Bkt, 2-Speed, New Eng & Pump Drive at 2500 Hrs
2004 Cat 740 ........................................$135,000S/N AXM01186, 8360 Hrs, Trans Rebuilt at
7949 Hrs
2007 Cat D5GLGP ................................$69,500S/N RKG03458, 3783 Hrs, EROPS, A/C, PAT Blade,
Joystick Steer, Drawbar, U/C Good
2011 Kleemann MC110Z....................$550,000S/N K0040240, 380 Hrs, Track Mounted, 300 TPH,
44”x28” Inlet
2010 John Deere 320D ........................$21,500S/N 181788, 1458 Hrs, OROPS, Manual Coupler,
Hand & Foot Controls, Bkt, Tires Good
1998 Cat 140H ....................................$125,000S/N 2ZK03040, 7242 hours, EROPS, heat, A/C,
tires fair, trans rebuilt
Page 8 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
TOOLS THAT MAKE YOUR BUSINESS WORK™
BURNSVILLE, MN DULUTH, MN MANKATO, MN(800) 552-1189 (800) 835-6225 (800) 862-6225 ROCHESTER, MN ROSEVILLE, MN ST. CLOUD, MN(800) 562-1505 (800) 704-0935 (888) 310-6225www.nussgrp.com
Volvo Construction Equipment
Comes fully loaded.Let’s work.Look to Nuss Truck & Equipment for a full line of industry-leading Volvo wheel loaders. Our loaders deliver superior breakout force, visibility throughout the entire lift cycle and industry-leading fuel efficiency. Uptime you can trust and depend on. All-day comfort and command in the legendary Volvo Care Cab.Get yours at Nuss and get to work.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 9
ALEX E. PARIS CONTRACTING COMPANY, INC.Route 18 - Atlasburg (Pittsburgh), PA 15004
724/947-2235 Day/Night Fax 724/947-3820Call Andy Miller Established 1928
Our Greatest Assets .. Our Employees
Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25rubber, 15K hours, work ready . . . . . . . . . . . .$42,500Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . . . .$79,500John Deere 624G, 1996, EROPS, quick coupler, GPbkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$46,000Volvo L60E, 2005, EROPS, coupler, aux hyd, boomsusp, 20.5R25, v. good . . . . . . . . . . . . . . . . . .$89,500
IR SD100D Pro-Pac Vibratory Compactor, 1999,Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500IR SD105DX, 2002, 84" drum, OROPS, clean $69,500IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit,ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, verynice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000(4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, allwork ready . . . . . . . . . . . . . . . . . . . . . .From $79,500Multiquip MR8G Walk Behind Vibratory Compactor,1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500Rammax Walk Behind Rollers, over 25 in stock, lever& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000(8) Sheepsfoot, 48" and 60", double drum & singledrum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500
Case/IH 485 Utility Tractor, 1986, Case 3 cyl dslengine, 55 gal water tank . . . . . . . . . . . . . . . .$10,500Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72"hydraulic broom . . . . . . . . . . . . . . . . . . . . . . .$11,500Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hydangle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500
Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt .$37,500Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000
Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD,29.5R25, A/C, 29 cy cap. sideboards, tailgate (current-ly off work), work ready . . . . . . . . . . . . . . . .$127,500Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25,working everyday . . . . . . . . . . . . . . . . . . . . .$145,000Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25,A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C,P/S trans, tailgate, work ready . . . . . . . . . . .$115,000Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires,approx 7,000 hrs, good condition . . . . . . . .$147,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,P/S trans, working everyday on jobsites . . . . .$87,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C,P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500
(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade,winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea.Cat D8N, 1991, ROPS, drawbar, S-U blade . .$85,000(2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea.
Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel,10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500Grove RT58C, 1981, down cab, 18 ton r.t., 70' boomanti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500
Cat 613C Water Wagon, 1994, 5000 gal drop tank,ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500Cat 621F, 1996, Scraper, OROPS, 33.25x2, very goodcondition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALLCat 621E, 1989, Scraper, OROPS, 33.25x29, very nice
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL
JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick cou-pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber,operational . . . . . . . . . . . . . . . . . . . . .$10,500/OFFER
Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, longstick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44"Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6"TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000(5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALLKomatsu PC160 LC-7KA, 2004, 24” TBG pads, JRBcoupler, plumbed, 8’6” width, nice, work ready . .CALLVolvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick,5.12 cy bkt, 22,000# ctwt, hammer/shear plumbingvery good condition . . . . . . . . . . . . . . . . . . .$159,000
(2) 48' Box Vans w/Liftgates, Good Condition . .CALL
IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL
(12) Allmand Light Plants, 2008-2010, diesel, s/a tow-type, (4) MH lights, excellent . . . . . . . . .From $5,200
Case 580L Rubber Tire Loader Backhoe, 1997,OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500
John Henry Drill Mtd on Cat 320N, 1994, 24' mast,Duraquip dust collection . . . . . . . . . . . . . . . .$150,000
(2) Balderson Broom Attachment for Cat IT Machines,8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea.
BUCKETSPC1000, 84" Digging Bucket . . . . . . . . . . . . . .$9,500Over 100 Excavator, Loader, Specialized & Grapple
Buckets in Stock-Call For Your Needs
FORKS(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style,excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000
Others Available CallPrices Are Negotiable - At Your Inspection
All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.
TRUCKS & TRAILERS
CRAWLER LOADERS
OFF ROAD HAULERS
MOTOR SCRAPERS
DRILLS
ATTACHMENTS
MISCELLANEOUS
WHEEL LOADERS
HYDRAULIC EXCAVATORS
CRAWLER TRACTORS
COMPACTORS
LANDSCAPING
CRANES
SPECIALS
BACKHOES
AIR COMPRESSORS
Page 10 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Michigan Infrastructure & TransportationAssociation (MITA) held its annual conference andtrade show, themed “Building Better, Building
Smarter,” Jan. 16 through 18 at Soaring Eagle Casino &Resort in Mount Pleasant, Mich.
The association represented nearly 600 Michigan compa-nies providing equipment, materials and services dedicatedto Michigan’s road and bridge, sewer and water, utility, rail-road, excavation and specialty construction projects through-out the state.
MITA Board President Chris Shea and Executive VicePresident Mike Nystrom delivered the welcome messageand opening remarks at the event’s general session.
Throughout the course of the three-day event, breakoutsessions were conducted covering topics ranging from theinfrastructure funding debate to truck regulations to thefuture of bonding. The event’s keynote speaker was CaptainD. Michael Abrashoff who, as the most junior commandingofficer in the Navy’s Pacific fleet, oversaw the turnaround ofthe underperforming warship, the USS Benfold. CapainAbrashoff’s story easily related to the similar problems con-fronting many organizations today.
Major event sponsors included AIS ConstructionEquipment, ALTA Equipment Company, and MichiganCAT.
MITA Holds ‘Building Better, Building Smarter’ Conference
(L-R): Adam Harding of AIS joins CRC’s Jeff Hammis,Corey King and Mike Schuyler to greet visitors at theirbooth display.
(L-R): Pro-Tec Equipment’s Paul Rosemeck, DaveMiedema and Joe Cook spoke with attendees abouttheir company’s line of trench shielding and shoringproducts.
Micah Brooks (L) of Somat Engineering discussestrenching and shoring safety with Mike Ross ofEfficiency Productions.
Heidi Flateau (second from L), Pamar Enterprises,speaks with (L-R) Jeffers Crane Service’s Kevin Boydand Vince Voetberg, along with Lauren Sustic ofAdvanced Concrete during the show.
With Michigan Laser recently joining GeoShack, com-pany Vice President Dan O’Reilly (L) and MikeFitzpatrick help Michigan contractors get familiarwith the GeoShack name and reputation.
Bill Theile (L) of Alta Equipment Co.talks about Volvo’s line of equipmentwith Mario Suarez of Super MExcavating & Development Inc.
Mike Zalewski (L) is joined by MikeKelleher of the Berger Dealer Group atSoutheastern Equipment Co. Inc.’sexhibit.
Michigan CAT’s Josh Buchanan (L) andChris Machalak greet attendees duringthe show.
Ritchie Bros.’ Steve Gorman (L) and TimKeane spoke with attendees about theauction company’s upcoming sales,including its big annual sale in Orlando,Fla.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 11
Contact Marty in Illinois1-800-307-0221
Photos & Detail Descriptions view:
www.finkbinerequipment.com
CEDAR RAPIDS CR452 - ‘12 • Rubber Tired, Stretch 20E, Top Con System V, 400 Hrs..$256,183CEDAR RAPIDS CR662RM - ‘10 • Mat. Transfer Vehicle w/ Hopper Insert, 1250 hrs......$249,982CEDAR RAPIDS CR662RM - ‘11 • Mat. Transfer Vehicle w/Hopper Insert, 702 Hrs ........$358,300MAULDIN 1500 - ‘03 • Track, Conveyor Fed, 8’-13’ Screed, 844 Hrs ................................$29,950MIDLAND SPR-6 - ‘11 • RH Discharge Widener to 6’, 390 Hrs ........................................$79,512
CALL items may be on rent causing pricing and hours to vary.
ROADTEC RX400 - ‘11 • 48” Cut, 4 Track, Front Loading, Mill w/803 Hrs ..........................$319,950SUPERIOR BROOM DT80J - ‘12 • Fully Loaded Mid Mount Broom, 264 Hrs ........................$33,589WIRTGEN W50 - ‘11 • 20” Cut, 3 Wheel, Rear Discharge Mill w/284 Hrs ......................$139,950WIRTGEN W500 - ‘02 • 20” Width, 3 Wheel Mill w/ Load-Out Conveyor, 1600 Hrs ..........$76,500
SAKAI GW750 - ‘11 • Vibratory Pneumatic, 79’ Wide, 320 Hrs ........................................$99,782SAKAI R2H-2 - ‘10 • 3 Wheel Static Roller, 83” Wide Coverage, 350PLI, 450 Hrs............$85,000SAKAI SW800II - ‘09 • 67” Dbl Drm Vib, 1170 hrs ..........................................................$55,000SAKAI SW800II - ‘11 • 67” Dbl Drm Vib, w/remaining standard and EPTW, 182 hrs ......$84,320SAKAI SW850-2 - ‘10 • 79” Dbl Drm Vib w/balance of Std warranty and EPTW, 541 hrs $78,500SAKAI R2H-2 - 3 Wheel Static Rollers, 83”, *(7) machines in stock starting at (2012 w/415 hrs)..........................................................................................................................................$77,000SAKAI SW800 - 67” Double Drum Vibratory Rollers, *2012 w/85 hrs, $94,393; *2011 w/234hrs, $82,320; 2009 w/1170 hrs, $55,000SAKAI SW850-2 - 79” Double Drum Vibratory Rollers, *2011 w/99 hrs, $99,500; *2010 w/622hrs, $78,500SAKAI SW880 - 79” Double Drum Vibratory Roller, *2012 w/very low hours......................$CALLSAKAI SW652 - 57” Double Drum Vibratory Roller, *2012 w/106 hrs..............................$82,495SAKAI SW330 - 51” Double Drum Vibratory Roller, *2012 w/150 hrs..............................$32,487SAKAI SW320 - 47” Double Drum Vibratory Roller, *2012 w/very low hours......................$CALLSAKAI SW300 - 40” Double Drum Vibratory Roller, 2009 w/250 hrs................................$24,495SAKAI GW750 - Vibratory Pneumatic Roller, *2011 w/425 hrs ........................................$99,782
*Comes with any remaining standard and 3 year extended power train warranty.
GRADALL XL4100II - ‘04 • Trk Mtd. Exc. w/2 Buckets, 5925 Hrs ....................................$129,950
MILLING MACHINES
ROLLERS
PAVERS / ROAD WIDENERS
EXCAVATORS
Milwaukee, WI1-800-236-6900Fax 414-541-1892
Wausau, WI1-800-242-7113Fax 715-675-9748
Crushing & Screening Div.Little Chute, WI1-800-236-8318Fax 920-788-6753
YOUR AUTHORIZED DEALER
in WISCONSIN and UPPER MICHIGAN for:
For information on our in-stock equipment, contact Lanny Peterson at:[email protected] or
mobile 1-715-574-8089 or 1-800-242-7113
AGGREGATE EQUIPMENTALLIS RT2448 PORTABLE JAW PLANT, 1993, with 24”x48” Jaw, 48”x20’ Vibrating Grizzly Feeder, Front DischargeConveyor, Six Hydraulic Legs, Tri-Axle Chassis, Cummins NT855 Diesel with Hydraulic Drives for Feeder & Conveyor............................................................................................................................................................................$185,000JCI K-300 “KODIAK” PORTABLE CONE PLANT, 300 hp electric motor, 36”x 20’ side discharge conveyor, 36”x 35’feed conveyor, motor control panel, hydraulic leveling......................................................................................$375,000POWERSCREEN 510 COMMANDER RINSER SCREEN PLANT, 11.8 Yd. hopper with hydraulic dump grizzly, 36” feedconveyor, 5x10 3-Deck screen, tandem axle, Deutz diesel ..................................................................................$52,400
EXCAVATORSDEMAG H95 MASS EXCAVATOR, Powered by a Cat 3408 Diesel, with a 24’7” Gooseneck Boom, and a 10’8”Stick with 43’6” Reach and 25’ Digging Depth, 7.2 cu yd HD Rock Bucket, Approx. 220,000 Lb. Working Weight,5800 Frame Hours and Recent Engine Rebuild......................................................................................$125,000LIEBHERR R974B HDSL UTILITY CRAWLER EXCAVATOR, Powered by a 471 HP Liebherr D9408TI Diesel,33’11” Semi-Gooseneck Boom with 15’5” Stick, 5 cu yd HD Bkt, 21’x14’ 4” Wide U/C with 30” Track Pads adnRemovable Sideframes, Approx. 190,000 Lb. Working Weight ....................................................................CALLLIEBHERR R954C HD “LITRONIC” CRAWLER EXCAVATOR, (Several 2006-2007 Models Available) w/VariousBoom/Stick Combinations and Buckets Available, 326HP Liebherr D936L Six-Cyl. Tier 3 Diesels, HydraulicallyRemovable Counterweights, 124,000 to 130,000 Lb. Working Weights ......................................................CALL
CRANESGROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ Power-Pinned Boom,32’ to 56’ Telescopic Offsettable Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work..$179,900GROVE TM9120 100 TON TRUCK CRANE, 1997, 42’ to 130’ boom, 33’ to 58’ offsettable telescopic swingaway,Grove HO50 main & aux. hoists, LMI, Cummins 6CT8.3 diesel, mounted on a Grove 8 x 4 chassis with aCummins N14 diesel and Roadranger transmissions. Tandem boom dolly ..........................................$395,500GROVE RT855B 55 TON ROUGH TERRAIN CRANE, 1996, with Cummins diesel, 37’ to 115’ boom, 35’ to 60’swingaway, LMI, Grove model HO30 main & aux. hoists, 29.5x25 tires ..............................................$189,500MANITOWOC 11000 100 TON CAPACITY CRAWLER CRANE, 2008, (100 Ton capacity @ a 14' radius), with a332 hp Hino 6 cylinder Tier III diesel, 200' main boom, 60' jib, LMI, 36” crawler shoes, approximate workingweight of 218,000 lbs. with 74,970 lb. 5-piece counterweight, counterweight and side-frame removal systems.3020 hours ..................................................................................................................................................CALL
GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS
• LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLERCRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/
JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAGCRUSHERS • MANITOWOC CRANES
MANITOWOC 11000 CRAWLER CRANE GROVE TM9120 TRUCK CRANE
Large Selection of New & Used Equipment in Stock.
View us at:www.amstate.com
Page 12 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
JD 800CLC, 14' 5" Arm,36" Pads, #N4385 ..............................$450,000
JD 600CLC w/ GenesisGXP1200R Shear,#U10798 ........$500,000
NPK Hammers, AllSizes for All Makes.Inspected and WellMaintained, GH4-GH18
JD 770D, Tall Cab, 12’ Blade, Warranty,#U11496 ........$152,000
JD 850J, 24” Pads,128” Blade, #U11325 ..........................$184,000
Fiat 65E, 110HP, BladePitch, 252 Hrs, #A7104......................$108,000
JD 330CLC, 60’ SuperLong Front, #U10682 ..........................$129,000
JD 9520 ScraperSpecial, #U10292 ..............................$129,000
JD 310SG, #N4288,Cab, Air, Aux Hyd ..................................$48,000
Bomag BW180AD, 71"Drum, #A4597 ......................................$38,000
JD 750J LGP, 156”Blade, #U11482 ..................................$175,000
JD 450DLC, 12’10”Arm, 36” Pads, CWRD,#U11280 ........$355,000
JD 400D, New KLEIN8000 gallon water truck,6234 hrs, #U11425..............................$268,000
JD 544J, Cab, Air, GPBkt, #U11303..$106,000
JD 700J, LGP, 30” Pads,132” Blade, Winch,#U11492 ........$179,000
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 13
HYSTER C530A 9 WHEEL PNEUMATICROLLER, 81 HP 4.236 Perkins Diesel, 3F-3RPowershift Transmission, Good 7.50x15 Tires,3 In Stock ......................................$8,500 Each
CAT D3G XL HYDRAULIC 6-WAY DOZER, 77HP, Canopy, Hydrostatic Transmission, JoystickControls, Very Good Undercarriage w/16” Pads............................................................$37,500
CAT D6R XL HYDRAULIC DOZER W/TILT, 175HP, Cab w/Heat & AC, Powershift w/DifferentialControl, Fingertip Autoshift, Good U/C w/30”Pads ....................................................$97,500
FIAT ALLIS FG65C TANDEM DRIVE ARTICU-LATED MOTOR GRADER, 80 HP, Canopy, 6F-3R Powershift, 10’ Moldboard w/Sideshift &Tilt, Very Good Tires ..........................$32,500
CAT 315CL 1.13-YARD HYDRAULIC EXCAVA-TOR, 99 HP, Cab w/Heat & A/C, 10’6” Stick,48” Bkt, Hydraulic D/C, VG UC w/28” Pads ..................................................................$75,500
CAT D8H HYDRAULIC SU DOZER W/TILT, 270HP, Canopy, Powershift, Direct Start, EngineEnclosures, Auxiliary Hydraulic Valve, Good UCw/ 24" Pads ........................................$26,000
2001 FORD F550 XL SUPER DUTY DUMPTRUCK, 7.3 V-8 Diesel, AC, Automatic, 9’ DumpBox, Behind Cab & Side Tool Boxes ....$15,500
CAT D8N HYDRAULIC STRAIGHT DOZERW/TILT, 285 HP, NEW Cab w/ Heat & AC,Powershift, Differential Steer, VG UC w/ NEWS&L Rails Groups & 28" Pads ..........$102,500
CAT 320CL 1.83-YARD HYDRAULIC EXCAVA-TOR, 128 HP, Cab w/Heat & A/C, 9’6” Stick, 42”Bkt, VG UC w/31.5” Pads, REBUILT ENGINE ................................................................$91,000
CAT 420D 4x4 1-1/4 YARD LOADER BACKHOE,88 HP, Cab w/ Heat & AC, GP Front Bucket, 24"Ditching Bucket on Hoe, Good Tires ..$39,500
2003 DIERZEN DOMINATOR 22’ TANDEM AXLEQUARTER FRAME END DUMP, Dual FunctionTail Gate, Manual Tarp, Aluminum Budd Wheels,Spring Suspension................................$24,500
CAT 950G 4-1/2 YARD ARTICULATED 4WDLOADER, 180 HP, Cab w/Heat & AC, ECPCTransmission, GP Bkt, Good Tires ......$72,500
CAT 312CL 0.98-YARD HYDRAULIC EXCAVA-TOR, 90 HP, Cab w/ Heat & AC, Radio, 10' Stick,24" Bucket w/ Teeth, Very Good Undercarriage w/23.5" Pads ..............................................$68,500
CAT 938F 3-1/4 YARD 4 WHEEL DRIVELOADER, 140 HP, Cab w/Heat & A/C,Powershift Autoshift, GP Bkt, Ride Control,Good Tires ..........................................$57,500
CAT 950F II ARTICULATED 4-YARD 4 WHEELDRIVE LOADER, 170 HP, Cab w/ Heat & AC,REBUILT Powershift Transmission, GP Bucket,VG ......................................................$62,000
CONTACT815-968-0818
www.adamsequipment.com
For our full inventory, please visit www.adamsequipment.com
CAT 330CL 2-3/4 YARD HYDRAULIC EXCAVA-TOR, 247 HP, Cab w/Heat & A/C, 12’9” Stick,74” Ditching Bucket, VG UC w/34” Pads ....................................................................$102,000
Page 14 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Leading Edge Attachments Stars on Discovery’s ‘Gold Rush’By Mary ReedCEG CORRESPONDENT
One of the most popular TVshows today is the DiscoveryChannel’s “Gold Rush,” in whichprospectors undergo hardships andcope with various crises as theyattempt to locate and mine golddeposits.Gold Rush is probably the only
reality show heavily featuring con-struction equipment from a paradeof manufacturers such asCaterpillar, Volvo and Komatsu.However, it was an attachment for aHitachi excavator that broughtJefferson, Mass., based LeadingEdge Attachments Inc. to the smallscreen and national attention.“One of the main characters on
the show is Dakota Fred, who isactually Fred Hurt from Minot,North Dakota. In February of 2012his associate friend contacted usinquiring about our special SHARCrock ripping bucket for their HitachiEX270,” said company presidentLee Horton. “We ended up sendingthe shipment to their Minot location
and they moved it to Alaska with their equipment.”The attachment Leading Edge supplied for the prospec-
tors’ excavator was a Hi-Cap Multi-Ripper Bucket, whichHorton described as “the most powerful, most severe andeffective rock and frost ripping bucket in the world.”The bucket employs the company’s SHARC (Shanks on
an ARC) arrangement, by which the teeth hit one at a time,thus providing full breakout force sequentially on each toothand resulting in huge rock ripping forces. The bucket alsouses Leading Edge’s Multi-Ripper Teeth, manufactured forthe company by MTG Corporation in Spain to fit on itsKingMet System adapters. These teeth resemble a smallMulti-Ripper in that the spikes do not align, so each pointhits one at a time. The company has found the MTGKingMet system is the strongest tooth system that will standup to the high forces of the Multi-Ripper products.“In the show, Dakota Fred said, referring to the bucket,
‘we affectionately call this bucket the Bedrock Shark,’”
Horton said. “They used the bucket to rip through thecemented cobble and bedrock near the bottom of an ancientwaterfall that they call their ‘glory hole.’”“Televised footage showed the conventional trenching
bucket just skimming over the top of the rock. Fred was thenseen operating his Hitachi excavator with our Hi-Cap Multi-Ripper Bucket, and it was ripping the material with ease. The
machine had a hydraulic thumb mounted also, which wouldhelp if he needed to grab a boulder,” Horton added.Horton has been in touch with the associate mentioned,
who said that on one occasion the attachment “saved theday” because they had no other way to get through thebedrock. There are plans to use the bucket more this summer
(Discovery Channel photo)Gold Rush is probably the only reality show heavily featuring construction equipment from a parade of manufacturers such as
Caterpillar, Volvo and Komatsu. However, it was an attachment for a Hitachi excavator that brought Jefferson,Mass., based Leading Edge Attachments Inc. to the small screen and national attention.
(Discovery Channel photo)In the show, Dakota Fred said, referring to Leading Edge Attachments’ bucket, “we affectionately call thisbucket the Bedrock Shark.”
see GOLD page 16
“There are plans to use thebucket this summer and itmay appear in next season’sshows.”
Lee HortonLeading Edge Attachments
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 15
(262) 781-3770
SEE PHOTOS OF OUR COMPLETE INVENTORY AT WWW.ARINGEQUIPMENT.COM13001 W. Silver Spring Drive
Butler, WI 53007
Jim KingMobile: (414) 530-0592
Fax: (262) 781-5053Email: [email protected]
WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL DENNY KREUSER (608) 386-8480 FOR MORE INFO.
2005 Volvo L220E, Cab, A/C, Radio, AdditionalWork Lights, Return to Dig, Boom Suspension,Engine Block Heater, 7cy Bucket w/BOE,29.5R25 Tires, Recent Transmission..$89,500
2003 Volvo EC360B LC - 12' 10"' ARM;AC; RADIO; 36" PADS; 70% UC; 54" P/OBUCKET; PILOT PATTERN CONTROLCHANGE ..................................$103,500
2009 Volvo ECR145CL - A/C, Radiow/CD, 24" Pads, 8'2" Stick,Hammer/Shear Piping, Q/C Piping, PilotPattern Control Changer............$112,000
2011 Volvo L70F - Cab, A/C, Radio w/CD, HeatedOperator's Seat w/Left Hand Armrest, Rear Cameraw/Color LCD Monitor, Work Lights, Boom Suspension,3rd/4th Hyd. Functions, Hydraulic Attachment Bracket,Reversible Cooling Fan, Rotating Beacon, Front FrameFootsteps, Right Hand Footstep w/Toolbox, Rear FrameCover Plates, CareTrack Satellite Hardware, 100" 3cyBkt w/BOE, 20.5R25 Bridgestone VJT L-3 Tires..$CALL
2008 Volvo L220F - 10,700 Hrs, Cab, A/C, Radiow/CD, Boom Suspension, Eng. Block Heater, LoggingCWT, 8cy Bkt w/BOE, 29.5R25 Tires ..........$185,000
2004 Volvo A40D - AC, CONTRONICS,29.5-25 TIRES, TAILGATE ..........$CALL
2008 Volvo DD24 - Dual 47” Drums w/UrethaneWipers, ROPS, Sliding Seat w/Dual Lever Control,Hydrostatic Drive, Work Lights, Rotating Beacon,Offset Articulation Joint, 68 Gallon Pressurized WaterSystem w/4 Nozzles Per Drum, Loading/UnloadingTraction Control, (NEW) 3 Cylinder Cummins Engine(32HP), Operating Weight 5,725 lbs ..............$18,500
2012 Volvo L60G, 20.5R25 tires, tier 4i D6H engine,reversible cooling fan, radio w/cd, rear camera, rotat-ing beacon, hyd. 4 func., boom susp., CareTrack,municipal trade ................................................$CALL
2009 Volvo L120F - Cab, A/C, Radio w/CD,Heated Suspension Seat, Boom Suspension, HydAttachment Bracket, Reversible Cooling Fan, WorkLights, Reverse Alarm, Front Frame Steps, RearFenders w/Guard Rails, 113” 4.4cy H/O STE Bucketw/BOE, 23.5R25 Tires ............................$185,000
2008 Volvo L70F - Cab, A/C, Radio w/CD,Front Work Lights, Boom Suspension, 3rd Function,Hydraulic Attachment Bracket, Reversible CoolingFan, Front Frame Footsteps, Right Hand Side Stepsw/Lockable Toolbox, Engine Block Heater, DymaxHydraulic Q/C, Dymax 4cy High Tip Bucket w/BOE,20.5R25 Goodyear RL-2+ Tires 50% ......$103,000
2011 Volvo A40F – 1262 Hrs, Volvo D16H(476hp) Tier 4i Engine, Heated Air Suspension Seatw/Armrest, Front Work Lights, Rear View ColorCamera, Electric Hood Opener, Delayed EngineShutdown, Engine Block Heater, CareTrack TelematicsSystem, 29.5R25 Michelin XADN Tires....$450,000
2012 Volvo L90G, Cab, A/C, Radio w/CD, Heated Operator'sSeat w/Left Hand Armrest, Forward View Mirror, Rear Cameraw/Color LCD Monitor, Sliding Window Operator's Door,Additional Work Lights Front/Rear, Boom Suspension, 3rdHydraulic Function, Hydraulic Attachment Bracket, ReversibleCooling Fan, Reverse Alarm, Rotating Warning Beacon, RearFrame Cover Plates, Rear Belly Guard, Front Frame Footsteps,Full Rear Fenders, CareTrack Satellite System w/3yrSubscription, 104" 3.5cy Bucket w/BOE, 20.5R25 BridgestoneVJT L-3 Tires, Volvo D6H (Tier 4i) Engine ....................$CALL
2012 Volvo L70G, Cab, A/C, Radio w/CD, Heated AirSuspension Operator's Seat w/Left Hand Armrest, RearCamera w/Color LCD Monitor, Sliding Window Operator's Door,Work Lights, Boom Suspension, 3rd/4th Hydraulic Functions,Hydraulic Attachment Bracket, Reversible Cooling Fan, EngineBlock Heater, Reverse Alarm, Rear Frame Cover Plates, FrontFrame Footsteps, Logging Counterweight, CareTrack SatelliteSystem w/3yr Subscription, 100" 3.1cy Bucket w/BOE, 20.5R25Michelin XHA2 L-3 Tires, Volvo D6H (Tier 4i) Engine....$CALL
2009 Volvo ECR88, 1100 Hrs, Cab, A/C, Radio,Suspension Seat, Anti-Theft System, Work LightsFront/Rear, 18” Rubber Tracks, 83” Stick, 140” OffsetBoom, Joystick Pattern Selector Valve, Pilot Controls,Q/C Piping, Auxiliary Hydraulics, Automatic 2 SpeedTravel, Leveling Blade, Optional (882lb) Counterweight........................................................................$88,500
1999 Volvo L90C, Cab, Heater, Contronics, Radio,Single Lever Control, F/R Switch, Front Work Lights,Boom Suspension, 3rd Function, HydraulicAttachment Bracket, 3.4cy Bkt w/Teeth, 20.5R25Tires 35%........................................................$60,000
2005 Volvo L70E - Cab, A/C, Contronics,Hyd Attachment Bracket, 20.5R25 Tires,2.5CY Bucket w/BOE ................$108,500
Page 16 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Leading Edge’s Hi-Cap Multi-RipperBucket Digs for Treasure in Alaskaand it may appear in next season’sshows.“The EX270 malfunctioned while
they were using the bucket so the showdid not show fully what it could reallydo. Many of the numerous commentswe are receiving are from existing cus-tomers saying that if the machine hadnot malfunctioned it would have bettershown the bucket’s capabilities. Wehave received many other calls frompotential customers asking for moreinformation on the product line. Itseems that many people are usingGoogle to search for ‘Bedrock Shark’and it is leading to our Web sitedigrock.com,” Horton said.This is not the first unusual location
in which Leading Edge products havebeen employed, since the company hassome Hi-Cap Multi-Ripper Bucketcustomers using its product for rippingsalt off the bottom of the Dead Sea.“We also sold our Multi-Ripper
Buckets to a geologist group excavat-ing near Puerto Plata in the DominicanRepublic, in connection with a hugeasteroid whose collision created theChicxulub crater in Mexico 65.5 mil-lion years ago, causing fires and atsunami killing nearly all living crea-tures in all the continents,” Horton said.“The accepted theory says the asteroidkilled the dinosaurs and sent much ofthe period’s marine life into extinc-tion,” adding the geological team needsthe bucket “because the asteroid basi-cally melted the earth when it hit, caus-ing a melted glass-like rock. They aredigging up fossils and I believe that ourcustomer found one of the fossils that isproving the asteroid theory.”Leading Edge products have been
honored with several awards, includingTop 25, 50, and 100 Products of theYear Awards and a Design InnovationAward. Its latest product is theStumpiranha for ripping out stumpsand it also is working on several newproducts due to debut soon, including anew coupler.
About the CompanyLeading Edge Attachments Inc., was
founded by Lee Horton in January2002. Its first employees originallyworked at Wain-Roy, which was pur-chased by Woods EquipmentCompany. The New England Wain-Roy plant was closed and its produc-
tion moved to the CentralFabricators/Woods plant in Wisconsin,which had manufactured buckets forJohn Deere and Hitachi.Lee Horton was director of engi-
neering for Wain-Roy and engineeringmanager for Woods. His companynow owns a warehouse on three acresin Hubbardston, Mass., near the loca-tion of the original Wain-Roy plant andis still affiliated with Woods via sub-contracted manufacturing.Leading Edge specializes in the
design and sale of American-madehigh quality frost and rock ripperattachments and quick-change cou-plers for hydraulic excavators and trac-tor loader backhoes from 6,000 to300,000 lbs. (2,722 to 136,078 kg). Its
first main product was the Multi-Ripper, followed by Multi-Ripper andHi-Cap Multi-Ripper Buckets. Thecompany then introduced Multi-Ripper Teeth and the Raptor,DigNRip, and Stag Buckets. All itsproducts are patented in many coun-tries, and “Multi-Ripper,” “LeadingEdge Attachments Inc.” and “Woods”are registered trademarks.The company also designs special
products by customer request and isopen to considering problems contrac-tors have experienced with a view todeveloping solutions.
(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.) CEG
(Discovery Channel photo)Leading Edge Attachments’ a Hi-Cap Multi-Ripper Bucket was attached toa Hitachi EX270 excavator.
(Discovery Channel photo)There are plans to use the Leading Edge Attachments’ bucket more thissummer and it may appear in next season’s shows.
GOLD from page 14
Berry Tractor & Equipmentwww.berrytractor.comKSGarden City800-475-2290Kansas City913-829-4600Topeka800-864-4509Wichita800-283-4246MOSpringfield800-864-7995
Brandeis Machinery & Supply Companywww.brandeismachinery.comINEvansville812-425-4491Ft. Wayne260-489-4551Indianapolis317-872-8410KYCorbin606-528-3700Lexington859-259-3456Louisville502-491-4000Paducah270-444-8390Stanville606-478-9201
Columbus Equipmentwww.columbusequipment.comOHCadiz740-942-8871Canton330-453-4521Cincinnati513-771-3922Columbus614-443-6541Dayton937-879-3154Painesville440-352-0452Perrysburg419-872-7101Piketon740-289-3757Richfield330-659-6681Zanesville740-455-4036
Continental Equipment Corp.www.aisequip.comMIGrand Rapids616-538-2400Lansing517-321-8000New Hudson248-437-8121Northeast Detroit - Lenox586-727-7502Saginaw - Bridgeport989-777-0090Traverse City - Williamsburg231-267-5060
Every Komatsu Tier 4 Interim construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary Komatsu Diesel Particulate Filterexchanges. With Komatsu CARE you can:
• Lower your cost of ownership• Increase equipment uptime and reliability• Protect the value of your Tier 4 capital investment
It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers.
To learn more about Komatsu CAREcontact your Komatsu distributor or scanthis QR code with your smart phone.
GO WITH KOMATSU... AND GET THE ONLY TIER 4 INTERIM EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.
MIDWEST KOMATSU DISTRIBUTORS
T M
s
W
8
8
8
H
W
8
8
W
8
B M
P
2
I
F
8
A
8
O
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 17
Customer CareFrom Komatsu - The Product Support Experts
You need your machines running to keep your business running. And you need complete confidence in your expert service team to keep them running at maximum productivity.
At Komatsu, customer satisfaction is our number one priority.
Komatsu certified, factory-trained technicians have the knowledge and determination to make repairs right the first time. Our parts inventory and distribution systems allow us toget most replacement parts to you in 24 hours or less.
www.komatsuamerica.com
Customer CarCustomer CarCustomer CarCustomer Carom Komatsu - The PrFrCustomer Car
om Komatsu - The PrCustomer Car
oduct Support Expertsom Komatsu - The PreCustomer Car
oduct Support Expertse
oduct Support Experts
www.komatsuamerica.comwww.komatsuamerica.com
Diesel Machinery, Inc.www.dieselmachinery.comSDAberdeen605-725-4364 • 888-762-6312Rapid City605-348-7438 • 800-658-3047Sioux Falls605-336-0411 • 800-456-4005
General Equipment & Supplieswww.genequip.comNDBismark800-279-4437Fargo800-437-2924Minot800-825-0479
Road Builders Machinery & Supply Co., Inc.www.roadbuildersmachinery.comKSKansas City913-371-3822NEGrand Island308-384-2620Lincoln402-325-0447Omaha402-331-9200
Road Machinery & SuppliesCo.www.rmsequipment.comIACedar Rapids319-363-9655 • 800-616-6615Des Moines218-741-9011 • 800-555-1455Sioux City712-252-0538 • 800-633-9104ILMilan309-787-1742 • 800-633-9114MNDuluth218-727-8671 • 800-888-9535Savage952-895-9595 • 800-888-9515Virginia218-741-9011 • 800-752-4304
Roland Machinery Co.www.rolandmachinery.comILBolingbrook630-739-7474Carterville618-985-3399Marengo815-923-4966Springfield217-789-7711INPortage219-764-8080MIEscanaba906-786-6920MOBridgeton314-291-1330Cape Girardeau573-334-5252Columbia573-814-0083Palmyra573-769-2056WIDeForest608-842-4151DePere920-532-0165Eau Claire715-874-5400Franksville262-835-2710Schofield715-355-9898
T M
H
.komatsuamerica.com/komatsu-carwww
e .komatsuamerica.com/komatsu-car
Page 18 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Nearly 700 Attend Scharber & SonsAnnual Public, Private Sector Event
More than 700 people attended the event.
Jon Almquist of Toro Siteworks Division shows thenewest addition, the STX26 stump grinder, part ofToro’s 2013 tree care equipment line.
Jeremy Lee (L) and Brian Peavey, Cargill Corp. main-tenance technicians out of Elk River, Minn., look overthe specs on this John Deere gator.
Otto Scharber gives this Gravely Pro-Turn 260 a try.
Mille Lacs County sent the big hitters down to theScharber event. Senior Highway Maintenance crewmember Bill Kerwin (L) and Shawn Steinbrecher checkout the differences of their Woodsman chipper andthis Terex Woodsman 730.
Patrick Jennissen (L) of Felling Trailers shows JesseEwerts of Jesse Ewert Tree Service the features on thisFelling FT-12DT HD trailer that is carrying a 2720 com-pact tractor for the John Deere 260 that Ewerts is look-ing to pick up.
Dale Shequen, Midwest product specialist, Gravely,shows Beau Scharber (seated) how to work the newGravely Pro-Turn 460 propane mower.
Mike Scharber welcomed all of the attendees to hisexhibit during the 2013 Government, Commercial Day.
Nearly 700 peopleattended theScharber & Sons
annual Commercial &Governmental Open House,which was held on Jan. 23. The event was a chance forcustomers and vendors tomeet and talk about theequipment the company hasto offer. As in the past withthe company’s open house,Scharber & Sons invitedmembers of the MinnesotaState Patrol to make a safetypresentation on commercialtruck regulations.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 19
1995 Komatsu PC250LC-6; #91777, Aux Hyd,31.5” Tracks, 10,000 hrs ......................$49,500
2003 Komatsu WA180-3; #91673, Cab/AC,Ride Control, QC/Bucket, 8,800 hrs ......$47,500
2001 Komatsu WA380-3; #81866, Cab/AC,Ride Control, QC/BKT/Forks, 8,300 hrs $79,500
1996 Komatsu WA250-1; #91810, Cab/AC, GPBucket, 20.5-25 Tires ............................$34,500
1994 Komatsu PC200LC-6; #91806, Cab/AC, 9’6” Arm, 31.5” Tracks, 6,800 hrs ..........$47,500
2003 Caterpillar D6N LGP; #91804, Cab/AC,Good U/C, Trimble System....................$98,500
2003 Caterpillar D6R XL II; #91695, Cab,Sweeps, 26” Tracks, 14,500 hrs ........$104,500
2002 Caterpillar 769D; #81825, Cab/AC,18:00-33 Tires, Approx 10,000 hrs ....$269,500
2001 Caterpillar 730; #91650, Cab/AC, 23.5-25Tires, 12,400 Hrs ..................................$99,500
2002 Komatsu PC300LC-6; #91646, Cab/AC, 13’Arm, QC, 33.5” Tracks, 10,650 hrs ......$76,500
2001 Komatsu WA180PT-3; #91793, Cab/AC,GP Bucket, 17.5-25 Tires, 9,450 hrs ....$34,500
2006 Komatsu WA600-3; #81553, Cab/AC,Ride Control, 8 yd BKT, 3,400 hrs ......$399,500
Call Doug / Sam:(866) 485-7180
Page 20 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
B tt t l S R Solution s.
Custom Made Products Co.Humboldt, IA
(800) 760-7871 Call AnytimeScrapers on Hand at 10 Locations
FOR SALE OR FOR RENTLocations: Humboldt, Bayard, DeSoto, Iowa Falls, Union, Manchester, Britt, Hudson, Chariton & Wayne, NE
www.gncmp.com
GRADERSArt’s-Way Graders, (New & Used) ................................................CallJohnson Graders (New & Used)....................................................CallAll sizes available for either Manufacturer
ASHLAND18yd Ashland I-180 TS2s, (New & Used) ....................................Call17 1/2yd Ashland I-175 XL2, (New & Used) ................................Call15 1/2yd Ashland I-155 TS2s, (New & Used) ..............................Call15 1/2yd Ashland I-155 XL2s, (New & Used) ..............................Call13yd Ashland I-130 TS2s, (New & Used) ....................................Call13yd Ashland I-130 XL2s, (New & Used) ....................................Call11yd Ashland I-110 TS2s, (New & Used) ....................................Call11yd Ashland I-110 XL2s, (New & Used) ....................................Call9yd Ashland I-900’s & I-950’s, (New & Used)..............................CallAshland Groundhog GH2500, (New & Used) ................................Call
GARFIELD12yd Garfield Model 1150s, (New & Used)..................................Call8yd Garfield Model 850s, (New & Used)......................................Call5yd Garfield Model 550s, (New & Used)......................................Call
BIG DOG8 yd Big Dogs, (New & Used) ......................................................Call6 1/2 yd Big Dogs, (New & Used) ................................................Call5 yd Big Dogs, (New & Used) ......................................................Call12’ Feedlot Box Scrapers..............................................................Call10’ Feedlot Box Scrapers..............................................................Call12’ Box Scrapers ..........................................................................Call10’ Box Scrapers ..........................................................................Call
IRONWOLF8-12 yd ..........................................................................................Call
LEON10-13 1/2 yd ..................................................................................Call
NEW & USED ROWSE7 yd Rowse Model 7002 & 7004 ..................................................Call5 yd Rowse Model 7002 & 7004 ..................................................Call3 yd Rowse Model 3002................................................................Call
MISCELLANEOUS1 1/2 yd & 3 yd Durabilts Model DP60 & DP84, (New & Used) ..Call3/4 yd G&A Mini Scraper, (New & Used)......................................Call
18 yd AshlandI-180 TS2s(New & Used)Call
13 yd Ashland I-130 XL2s(New & Used)Call
We Will Not Be Undersold!
FreeDelivery!
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 21
NOW OPEN!
WI , shlandA 715.682.5522
WI , allsa FhippewC 715.834.2924
715.682.5522
715.834.2924
WI , oMonic 715.487.5583
uluth, MN D 218.722.7456
715.487.5583
218.722.7456
emidji, MN B 218.759.1996
, MN apidsand RrG 218.326.9427
218.759.1996
218.326.9427
anaba, MI Esc 906.789.9054
906.789.9054NOW OPEN!
, WIMosinee 715.693.3820ted ataocL rive Deef’K1425 O
715.693.3820eriv . 51/39)yy. 51/39)wwy(Exit #181 o� H
Page 22 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Contact Southeastern Equipment to Check Out the New Models of Case Construction Equipment
Cambridge, OH Monroe, OH Heath, OH Burlington, KY 740-432-6303 513-539-9214 740-522-3500 859-586-6133
North Canton, OH Mentor, OH Mansfield, OH Novi, MI 330-494-3950 440-255-6300 419-529-4848 248-349-9922
Gallipolis, OH Perrysburg, OH Marietta, OH Holt, MI 740-446-3910 419-874-0331 740-374-7479 517-694-0472
Dublin, OH Brunswick, OH Brilliant, OH 614-889-1073 330-225-6511 740-598-3400
New “N” Series Backhoes
Schwarze Street Sweepers
New CX55B Compact Excavator
Schwarze Asphalt Patchers
New “Alpha” Series Skid SteersNew “F” Series Wheel Loaders
Other Equipment Available Through Southeastern Equipment
www.southeasternequip.comCarlton Wood Chippers
Etnyre Distributors &Chip Spreaders
New “C” Series Excavators
Bomag Recyclers / Stabilizers
Terex Roadbuilding Pavers Vacall Sewer Equipment Eagle Crusher Plants
2003 Cat D8R II, S/N 06YZ01126, 8130 hrs,e/rops, a/c, heat, w/ multi-shank ripper, 8sublade, reman trans in 2011................$262,000
2005 Komatsu PC400 LC7, S/N 0A86676,6601 hrs, a/c, heat, u/c 65%, 2 available ..............................................................$159,000 EA.
2006 Cat 330DL, S/N PMWP00369, 5240 hrs,a/c, heat, pattern changer ..................$139,000
2006 Case CX240, S/N 46509315, 5083 hrs,a/c, heat, GPS machine, control ready ..........................................................................$89,000
FALL EQUIPMENT SALE2003 Cat 420D IT, 5082 hrs, 4WD, a/c, heat, extendahoe, Stk #465 ......................................................................$39,0002005 Cat D8T, 8115 hrs, e/rops, a/c, u/c 60%, 3rd valve, Stk #541 ....................................................................$289,0002005 Cat 320C LU, 3882 hrs, heat, a/c, u/c 65%, zero tail swing, Stk #437 ............................................................$90,0002005 Cat D6NXL, 6448 hrs, e/rops, new u/c, a/c, heat, GPS, Stk #399 ....................................................................$125,0001998 Cat 613C II, 11 yd scraper, 2706 hrs, heat, a/c, e/rops, 70% rubber ..................................................................$59,0002004 Cat 325CL, 4700 hrs, u/c 60%, a/c, heat, aux hydraulics,Stk #369 ....................................................................$107,0002004 Deere 450CLC, 6156 hrs, a/c, heat, thumb, u/c 85%, Stk #497 ....................................................................$127,0002005 Terex TA27-G7, 4769 hrs, rubber 50%, heat, a/c, 2 Available ..............................................................$99,000 EA.1986 Cat 613, Water wagon, 1945 hrs, cab, air operated watercannon, Stk #548..........................................................$29,0002010 LaBounty 200r, 500 hrs, 3rd member hydraulic process-ing shear ......................................................................$99,000
PHONE
(812) 282-2800 KENNY ACTON
(502) 639-4168
Ask about our GPS Machine Control Equipped Dozers,Graders & Excavators www.JobRentals.com
(812) 282-2882 FAX
6104 Sable Mill Court, Jeffersonville, IN 47130
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 23
WWW.RUDDEQUIPMENT.COM
1-877-DIG-RUDD
Rudd offers quality used equipment. Please contact Marcela Newman, International Sales Representative, or
Albert Medcalf, General Manager, Used Equipment and Parts, for more information.
Because the only pit you should be in is the one you’re digging.
Albert MedcalfOffi ce (502) 456-4050Cell (502) 592-6510
Marcela NewmanOffi ce (502) 456-0256Cell (502) 643-1829
Page 24 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
JCB Machines to Help Unearth Buried Wartime SpitfiresTwo excavators and a backhoe made by
Staffordshire-based JCB are about toembark on a mission to help recover Spitfirewarplanes designed by one of the county’smost famous sons and believed to be buriedin Burma.The unassembled planes are thought to
have been hidden in the ground by Americanengineers across three sites as World War IIdrew to a close.Now a bid to excavate for crates thought
to contain more than 30 of the Spitfires isabout to get under way at RangoonInternational Airport, and JCB is providing a22 ton (20 t) JS200 tracked excavator, a 24ton (22 t) JS220 tracked excavator and a3CX Eco backhoe loader to complete thejob.The company also is dispatching the team
leader of the world famous JCB DancingDigger display team, JCB demonstratorOliver Keates of Cheadle, Staffordshire, tooperate the machines and offer expert adviceon the digging operation.
JCB was founded by renowned engineerJoseph Cyril Bamford in a lock-up garage inUttoxeter, Staffordshire, in October 1945and under the leadership of his son,Chairman Sir Anthony Bamford, it hasgrown into the world’s third largest manu-facturer of construction equipment.It is another great Staffordshire engineer,
Reginald Mitchell, who is famous fordesigning the Spitfire. He was born in 1895in Kidsgrove, Staffordshire, and educated atHanley High School, Stoke-on-Trent.Bamford said, “Reginald Mitchell put
Staffordshire on the map in the 1930s withthe design of the Spitfire so it’s very fittingthat JCB, a modern day innovator and engi-neering company based in the county, shouldbe providing the excavators to dig up theplanes.”Oliver Keates, who has worked for JCB
for 14 years, said, “I’m excited at theprospect of being involved in this project.
It’s going to be thrilling to be atthe controls of JCB machinesattempting to unearth a Spitfire.”Businessman Julian Mitchell,
of Newcastle, Staffordshire, whois Reginald’s great-nephew said:“I’m delighted that JCB isinvolved in helping recover theSpitfires. Staffordshire is a greatmanufacturing county and I’msure my great-uncle would havebeen pleased that a modern-dayBritish engineering success storywas playing such an importantrole in this project.”The dig is getting under way after a 17
year search for the Spitfires led by aviationenthusiast David Cundall. Award-winningon-line games developer Wargaming isfunding the efforts to recover the buriedSpitfires.The JCB 3CX backhoe loader is the
world’s most versatile piece of constructionequipment and is one of the biggest sellingmachines due to its ability to load, road andexcavate. It weighs in at 17,000 lbs. (7,711kg) has a top speed of 25 mph and a bucketcapacity of 1.4 cu yd. (1 cu m). JCB hasmade more than half a million backhoessince 1953. The JS200 tracked excavator
being used in the dig is powered by a 172 hp(128 kW) engine and can dig to a depth of21.8 ft. (6.6 m).JCB is supplying the machines through its
dealer in Burma, RMA Services Co Ltd.Based in purpose-built facilities in Yangon,the company also is providing logistical andservice support.
Aviation enthusiast David Cundall, pictured with a JCBmachine, which had just arrived on site in Burma.
JCB’s Oliver Keates prepares to leave the snow behind to head for Burma where he will beleading the excavations for more than 30 unassembled WWII Spitfires thought to be buriedat Rangoon International Airport.
“I’m excited at the prospect of being involved inthis project. It’s going to be thrilling to be at thecontrols of JCB machines attempting to uneartha Spitfire.”
Oliver KeatesJCB
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 25
SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL
• No tools required• No expensive
hardware needed• No more rags
stuffed into hoses• No more messy
plastic caps• The ultimate
contamination control tool• One hand installation• Eliminate hydraulic
oil spills & clean up• Quick installation
& ease of usage• Safe for personnel
& environment• Industry acclaimed• 100% Made in USA
For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com
Page 26 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Featured Equipment:
815-893-6700
Your COMPLETE Rental Resource for Trench Shoring in Chicago & Illinois!
EFFICIENCY SHORING & SUPPLYEFFICIENCY SHORING & SUPPLYEFFICIENCY SHORING & SUPPLYCHICAGO BRANCH
SLIDE RAIL SYSTEMS
Special Operations Shoring Division
SHORING DIVISION
INSTALLATIO
NTRAINING
CONSULTINGPLAN
NING
RAI RAI SLIDESLIDE RAI RAI SLIDESLIDE
MSMS IL SYSTE IL SYSTEMSMS IL SYSTE IL SYSTE
SS
YTrench
SS
NI
C C C C
RTE our COMPLEY ental Resourcein ChicagoShoring Trench
CY CY CY NC NNN CY CY FFICIEFFICIEFFICIEF EEEEE N NNCY FFICIEFFICIEFFICIEEEEEEEEEEFFFFFFEEE FFFFFFIIIIII C C C NN NNN NNN NNN NEEEEEEEEE Y Y Y Y Y Y CY CY CY EEE CCCIIIIIIFFICIEFFICIEFFICIEC C C
CCC C H H I I C CA CA A G G O O B B R R RANC A N NCHICAGO BRANCHICAGO BRAN HHCHCH
ental Resource for & Illinois!in Chicago
G G & G & G Y SHORINY SHORINY SHORIN NG G G & Y SHORINY SHORINY SHORIN N N N N N N H H H H H H H H H H H H R R R R R R R R R I I I I I I O O O O O O G & G & G & Y Y Y Y Y Y Y SHORINY SHORINY SHORINC H I C A G O B R A NCHCHCHCHCHICAGO BRANC C G O CHICAGO BRAN
Y LYG LYG L LYG YY LYY SUPPL SUPPLY LYG LY SUPPL LYG LYY L LYY LYY Y & SUPPL & SUPPLYY LYG L L L LYY & SUPPL LY L LY LYG LY LYYY LYY L LYG LY LYG LYG LY & & & U U U U U U U U U L L L L L L P P P P P P & SUPPL & SUPPL & SUPPLYYYYYYYYY LYYYYYYYYY
in ChicagoShoring
in Chicago
Special Operations Shoring Division
Special Operations Shoring Division
Special Operations Shoring Division
815-893-6700
Featured Equipment:
815-893-6700
Featured Equipment:
®
2010 CAT 420E IT, S/N PHC00736, 799 Hrs ......$81,500 2008 Komatsu D51PX-22, S/N B10645, 3608 Hrs $88,000 2007 CAT CS-563E, S/N CNG02282, 1202 Hrs......$85,000 2006 CAT 311CU, S/N CKE01673, 3175 Hrs......$78,000
2003 Cat D6R XW, S/N AEP00228, 5349 Hrs$187,000 2008 Cat 140M, S/N B9M00278, 4312 Hrs ....$198,0002011 CAT 305D CR, S/N FLZ00648, 420 Hrs..$60,500 2008 CAT 950H, S/N K5K02253, 2223 Hrs $181,500
2009 CAT 315DL, S/N CJN01519, 1552 Hrs...$140,000 2008 Cat 953D, S/N LBP00793, 678 Hrs ......$154,000
Locations in Iowa, Illinois & MissouriBUY • SELL • CONSIGN • RENT
800-333-5993Bill Musgrave Ext. [email protected]
Corporate Office Cedar Rapids, IA.
Complete inventory & photos at:www.altorfer.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 27
Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50
Scale......................................................................................$90
Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale $90
Allis-Chalmers Yellow HD21 Dozer/Ripper, 1:50 Scale ..$90
Bantam C-35 Crawler Shovel, 1:50 Scale ......................$70
Bantam Truck Mounted Crane, 1:50 Scale ..................$125
Bantam Truck Mounted Shovel, 1:50 Scale ....................$60
Bobcat A300 Skid Steer Loader, 1:25 Scale ..................$40
Bobcat E35 Compact Excavator, 1:25 Scale ................$60
Bobcat M200 Gold Skid Steer Loader, 1:25 Scale ........$30
Bobcat M400 Gold 50th Anniversary Skid Steer Loader,
1:25 Scale..........................................................................$25
Bobcat M610 Golden 50th Anniversary Skid Steer
Loader ..............................................................................$25
Bobcat S175 Skid Steer Loader, 1:25 Scale ..................$45
Bobcat S205 Skid Steer Loader & Pick-Up Truck/Trailer
Set, 1:50 Scale ..................................................................$65
Bobcat 743 Skid Steer Loader, 1:25 Scale ....................$40
Bobcat 773 50th Anniversary Skid Steer Loader, 1:25
Scale..................................................................................$25
Case 580N Super N Backhoe/Loader, 1:50 Scale ........$50
Caterpillar AP655D Asphalt Paver, W/O Canopy, 1:50
Scale..................................................................................$85
Caterpillar Military D8R Track-Type Tractor, 1:50 Scale$65
Caterpillar D6K Track-Type Tractor................................$60
Caterpillar D8T Track-Type Tractor, 1:50 Scale ..........$110
Caterpillar D10T Track-Type Tractor, 1:50 Scale ........$105
Caterpillar D11R Track-Type Tractor, 1:50 Scale ..........$90
Caterpillar 226B3 Skid Steer Loader, 1:32 Scale ..........$50
Caterpillar 247B3 Multi-Terrain Track Loader, 1:32 Scale ..
..........................................................................................$50
Caterpillar 320D L Excavator, 1:50 Scale ....................$100
Caterpillar 323D L Excavator, 1:50 Scale ....................$100
Caterpillar 336D L Excavator, 1:50 Scale ....................$125
Caterpillar 432E Backhoe/Loader, 1:50 Scale ..............$75
Caterpillar 374D L Excavator, 1:50 Scale ....................$175
Caterpillar 906H Compact Loader, 1:50 Scale ..............$40
Caterpillar Military 924H Versalink Loader in Desert
Camouflage, 1:50 Scale ..................................................$45
Caterpillar 963D Track Loader, 1:50 Scale ....................$60
Caterpillar 977 Traxcavator, 1:50 Scale..........................$55
Doosan Moxy MT31 Articulated Truck ........................$115
Hamm GRW280 Compactor w/Cabin ............................$80
Hitachi EH700 Off-Highway Truck, 1:50 Scale ..............$40
International "S" Series Dump Truck,1:25 Scale ........$125
International TD-15 Dozer, 1:50 Scale ............................$65
International TD-20E Dozer, 1:64 Scale..........................$24
International TD-25 Dozer, 1:50 Scale ............................$70
John Deere 400D Articulated Truck, 1:50 Scale............$50
John Deere 624K Wheel Loader, 1:50 Scale..................$45
John Deere 850K Dozer ..................................................$60
John Deere 872 GP Grader, 1:50 Scale ..........................$60
Komatsu 475A Dozer, 1:50 Scale..................................$145
Komatsu D51 PX Dozer, 1:50 Scale................................$85
Komatsu D51 EX Dozer, 1:50 Scale................................$85
Komatsu D375 Dozer, 1:50 Scale..................................$110
Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$90
Komatsu HM250 Articulated Truck, 1:50 Scale ............$80
Komatsu PC14R Mini-Excavator, 1:32 Scale ................$50
Komatsu PC200 Excavator, 1:50 Scale ........................$105
Komatsu PC350 LC Excavator, 1:50 Scale ....................$90
Komatsu PC360LC-10 Excavator, 1:50 Scale ................$95
Komatsu PC400 LC Excavator, 1:50 Scale ....................$95
Komatsu PC2000-8 Front Shovel, 1:50 Scale..............$260
Komatsu SK1020 Skid Steer Loader, 1:25 Scale ..........$40
Komatsu SK1026 Skid Steer Loader, 1:25 Scale ..........$40
Komatsu WA500 Wheel Loader, 1:50 Scale ..................$95
Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ..
........................................................................................$100
Link-Belt 800 X2 Excavator,1:50 Scale ........................$200
Link-Belt 80100 Rough Terrain Crane..........................$200
Mack Granite MP w/ Bottom Dump Trailer ....................$95
Mack R Model Mixer Truck, Patriotic Detailing, 1:34 Scale ..
..........................................................................................$95
Northwest 25-D Shovel, 1:50 Scale ................................$75
Peterbilt 367 Dump Truck w/ Beavertail Trailer, 1:50 Scale
........................................................................................$100
Terex AC 100/4 All Terrain Crane, 1:50 Scale ..............$190
Volvo EC460 L Excavator, 1:50 Scale ..........................$150
Volvo SD-122 Soil Compactor, 1:72 Scale ....................$25
All New in Box
CALL Toll Free
800-523-2200Ext. 197
Collections Wanted, I Buy Collections Shipping and Handling Included
Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell
Email – [email protected]
CEG Scale Models470 Maryland Drive
Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
Caterpillar 980G Wheel Loader on a Kenworth W900 and Trailking Trailer, 1:50 Scale...$150 Hamm 3307 Compact Roller, 1:34 Scale...$50
Page 28 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
MnDot Aims to Finish Last Segment of Highway in 2018Construction Company, based in Marshall, Minn., with 30years of experience, led the most recent work under four sep-arate contracts. Both contractors specialize in highwayheavy road, commercial, excavation and demolition workoperating in the upper Midwest. Under a fifth contract as part of these highway improve-
ments, Lunda Construction, a Midwest bridge contractorwith headquarters in Black River Falls, Wiss., recently com-pleted construction on the replacement of the Union Pacificrailroad bridge crossing over Hwy 60 in Worthington, Minn.All five contracts total $51 million dollars in construction
costs with funding coming in from state bonds.Road crews will return this spring to begin the final push
to complete the remainder of the work at Worthington. At thesame time, MnDOT will let bids to begin the final run of theHwy 60 expansion in Minnesota just southwest of Mankato.Located between the small, rural towns of St. James and
Windom, Minn., MnDOT is hoping to finish this final sec-tion of highway in 2018. Covering six construction seasons,the final segment of road improvements will be completedunder three contracts. When the last piece of Hwy-60 is completed, motorists
and truckers will have a convenient, four lane expressway attheir steering wheels between Sioux City, Iowa, and theTwin Cities of St. Paul and Minneapolis by way of TH-169running north out of Mankato, a total distance of 275 mi.(440 km). Built decades ago as a narrow, two lane highway, Hwy
60 is a primary route running diagonally out of Mankato,Minn., southwest to Worthington, Minn., and 10 mi. (16 km)further south to the Iowa border.The city of Mankato is a college, industrial, agricultural
and residential community with a population of 40,000located 80 mi. (128 km) southwest of the Twin Cities ofMinneapolis and St. Paul. Worthington, Minn., is 90 mi.(144 km) further southwest from Mankato and sits on thesouth side of Interstate 90. Most of its economy revolves
around the agricultural sector with a mix of industry andbusiness activities.In between the two cities, smaller, rural communities and
farms dot the highway, which is posted at 65 mph and loadedwith numerous rural and city road crossings.The highway over time out lived its useful capacity and
original design, according to the MnDOT Web site for thisproject.Specifically, along with battling on-going maintenance to
repair deteriorating concrete pavement, MnDOT also had tomake design improvements for the mix of increasing farmand truck traffic with the commuting and traveling public. Aspart of the new design, engineers consolidated accesses tothe highway to eliminate the more dangerous local roadcrossings, again from information pulled from the MnDOTWeb site.Though a massive undertaking, MnDOT began to tackle
the project by segments and systematically re-build a new
highway 30 years ago. As the millennium in 2000approached, only three, isolated gaps in the highwayremained as two lanes.MnDOT’s engineers focus was now on to complete the
remaining gaps of two lane highway to expressway stan-dards and eliminate the inconsistency of changing from fourto two lanes and then back again a short distance later,which, they said was “not consistent with the good designsystem of providing a predictable design system formotorists.”Work on upgrading the remaining sections of highway
began in 2007 when Mathiowetz Construction mobilized 2mi. (3.2 km) inside Iowa and pushed north with its roadwork. Taking on approximately 10 mi. (16 km) of roadreconstruction over six construction seasons, Mathiowetzcrews finished at a point just south of Worthington, Minn.,last fall.With a little bit of an overlap in contracts, R & G
Construction moved in at the point Mathiowetz crews left atand continued to move north into the city of Worthington andwill finish their work at a point just north of the Interstate 90and Hwy 60 interchange on the east end of Worthington.Mathiowetz Construction crews just completed their sec-
tion of highway last fall. Randy Huiras, operations managerof Mathiowetz is pleased with the result of the road work andthe cooperative effort between MnDOT staff and his owncrews while facing some challenging weather over thelength of the project. At the same time, road crews lost threeweeks of peak construction time because of the state ofMinnesota budget impasse at the legislature in 2011.Making matters worse, the state of Minnesota closed
down for three weeks because of a budget impasse at the leg-islature in July 2011 and during the peak of the constructionseason.Despite the weather and three week delay, both contrac-
tors were able to get caught up and are pleased with theresults.
Equipment operators of a Grove crane keep the Union Pacific Railroad bridgereplacement moving forward.
A Grove crane is stationed at the Union Pacific Railroad bridge replacement proj-ect as part of the Hwy 60 expansion work. The existing bridge was replaced toaccommodate the wider road bed beneath the railroad crossing.
This road work on Hwy 60 in southwestern Minnesotawill be completed in the fall of 2013.
MNDOT from page 1
see MNDOT page 42
GOMACO’s new GT-3200 zero-clear-ance sidewalk paver slipforms anew 5 ft. (1.5 m) wide sidewalk on arehabilitation project in Edmonton,Alberta, Canada.
SECT IONPaving
Bergkamp’s M216 Paver Idealfor Large Preservation Jobs
Bergkamp Inc., based in Salina, Kan.,offers the M216 trailer-mounted slurry sealand micro surfacing paver, which is idealfor highway and large preventive mainte-nance jobs. It provides increased materialcapacity over truck-mounted units, and isBergkamp’s largest self-contained slurryseal and micro surfacing paver. The M216offers improved maneuverability whenused with a short-wheelbase truck, andallows contractors to achieve higher truckutilization — since the truck can be used forother applications in the offseason. Slurry seal and micro surfacing is a mix-
ture of aggregate, asphalt emulsion, waterand additives that is applied over existingpavement as one smooth layer — whichcan extend the life of pavement by up toseven or more years. The M216 can carry16 cu. yds. (12.2 cu m) of aggregate in alevel struck load, 1,500 gal. (5,678 L) ofasphalt emulsion and 1,000 gal. (3,785 L)of water. The water tank is located at thefront of the trailer to provide better weightdistribution and handling. It also has a 55-gal. (208 L) stainless steal additive tank.The pugmill, conveyor and all liquid mate-rial tanks are removable. All tanks are bolt-
ed in rather than welded, adding extra dura-bility and easy maintenance. The asphaltemulsion and water tanks are separate com-ponents, eliminating rust-through andcross-contamination of products. The M216 is run by an onboard engine.
It provides flexibility to better manage legalload weight restrictions by adding up tothree tag axles, including one behind thedrive axle — which increases the wheel-base and helps meet the Federal bridge law. Aggregate is delivered to the pugmill by
a belt-over-chain conveyor that eliminatesslippage. Steep hopper walls minimizebridging problems, while the hopper’spolyethylene lining reduces friction. Thiseliminates the need for a vibrator, whichdecreases problems with loose bolts anddamage to welds and components. Thewater, asphalt emulsion and additives ratiosare regulated as they are pumped into thepugmill, where they are mixed with theaggregate. The variable-speed, dual-shaft,multi-paddle pugmill has a dual hydraulicdrive, which provides even mixture andmaterial flow. For more information, call 785/825-1375
or visit www.bergkampinc.com.
GOMACO Debuts SidewalkPaver at World of ConcreteGOMACO introduced the GT-3200 side-
walk paver with an adjustable aggregatebase mold on the front and a sidewalkpaving mold on the rear at World ofConcrete 2013. It’s a three-track paverdesigned specifically for zero-clearancesidewalk rehabilitation projects, fulfilling acontractor’s unique request. The GOMACO GT-3200 can be
equipped with a front-mounted adjustableaggregate base mold to spread the baseaggregate for the sidewalk. During the firstpass, rock is placed on grade and an augerspreads the material, while three pan vibra-tors mounted to the mold start the com-paction process. The base mold is equippedwith two heavy-duty hydraulic cylinders thatprovide 14 in. (35.6 cm) of hydraulic lift forsetting the grade depth below the track lineand raising the mold for the paving pass.During the second paving pass, the side-
walk is slipformed with a unique, minimum-clearance trailing mold. The GT-3200 side-walk paver has a 20 in. (50.8 cm) wide, 14 ft.(4.3 m) long folding conveyor. The convey-or allows ready-mix trucks to discharge fromthe street instead of driving over existingcurb to reach the paver. The hydraulic pivot-ing conveyor also has been designed torotate 180 degrees to allow for easy loading
of concrete into the hopper from either sideof the machine and to avoid obstacles asso-ciated with zero-clearance paving. The side-walk mold features hydraulic adjustablesideplates to form the GOMACO edge,while a trailing stainless pan provides thesuperior finish. The sidewalk mold also canbe equipped with a bar inserter for placingtransverse bars into the slab, if required byproject specifications.The GT-3200 sidewalk paver also fea-
tures all-track steering, which saves timegetting on and off stringline, allows betterjob-site mobility, and ease in loading andunloading for transport. It can be transport-ed without removing either the front-mount-ed adjustable aggregate base mold or therear-mounted sidewalk paving mold.Simply fold the conveyor and drive the GT-3200 onto the trailer for transport. It featuresthe latest in GOMACO machine controlwith the exclusive G+ system with a newfull color screen. G+ is a powerful controller for paving
accuracy and electronic monitoring ofsteering and grade. G+, combined withthe GT-3200’s C4.4T Caterpillar enginewith 91 hp (67.9 kW), provides plenty ofpower for sidewalk paving, according tothe manufacturer.
Pages 29-39
The M216 can carry 16 cu. yds. (12.2 cu m) of aggregate in a level struck load, 1,500gal. (5,678 L) of asphalt emulsion and 1,000 gal. (3,785 L) of water.
Page 30 • February 16, 2013 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
FFC Concrete Claw Efficiently Grabs, Moves SlabsThe FFC concrete claw manufactured by
Paladin Attachments attaches to skid steers,compact track loaders and wheel loaders toprovide clean, quick and efficient methodsof sidewalk, driveway or any constructionsite concrete removal. It offers more pro-ductive operation with its lower profile andlow mounting height that allows materialtransfer while utilizing boom/loader armsupports. Easily replaceable teeth with 1.5-in. (3.8 cm) wide shanks decrease down-time. These replaceable teeth are securelyfastened with rubberized flex pins andallow the operator to easily slide the clawunder concrete slabs, lift and load them.Shanks and end plates made with high-strength T-1 steel and a 1 by 8-in. (2.5 by 20cm) wear-resistant pacal steel tapered cut-ting edge enhance durability. The FFC con-crete claw has a working width of 24 in. (61cm) to provide easy transportation and dis-posal of heavy concrete slabs and weighsapproximately 575 lbs. (261 kg). It has arated capacity on machines that have an upto 32,000-lb. (14,515 kg) operating weightand/or 10,000-lb. (4,536 kg) lift capacity.
For more information, call 800/456-7100or visit www.paladinattachments.com.
The FFC concrete claw has a working width of 24 in. (61 cm) to provide easy transportation and disposal of heavy concreteslabs and weighs approximately 575 lbs. (261 kg).
Serving the Asphalt Industry for 25 YearsServing the Asphalt Industry for 25 Years
1999 Rosco SPRH-HChip Spreader, 12 ft spread hopper,hydrostatic drive,Cummins 5.9L dieselengine
2002 Blaw Knox PF-3172Paver, Omni IIIA screed10-18 ft, power crown &slope, fume extraction,Cummins diesel engine,plumbed for automatics
2005 Ingersoll RandDD112HF Roller, 78" double drum highfrequency vibratoryroller, Cummins dieselengine, canopy, watersystem, (13 1/2 tons)
2004 Ford 750XL WaterTruck, Cat C7 dieselengine, automatic trans-mission, air brakes, with2007 Diversified watertank, 2350 gallons, 2 front& 2 rear spray heads,hose & reel, box withintake hose on back
2010 Midland SPD-8Road Widener, dual discharge, hydrostaticdrive, J.D. diesel engine
2001 Ingersoll RandDD90HF Roller,canopy, water system,scrapers, Cumminsdiesel engine, (10 1/2 tons)
2006 Laymor 8HC Broom,3 wheel, 8 ft broom,Kubota diesel engine, tow behind system, water system, canopy, goodbroom
2009 New-Unused StoneBulldog TR34 TrenchCompactor, New, Unused,Trench compactor, remoteoperation, 34" drums, 20HP Hatz diesel
NEW Cam Superline6CAM16FTT Trailer, 6ton full tilt trailer, 18 ftlong, reverse anglebeavertail, 8 D ring tiedowns, 102” wide, 81”usabale width, color-black, GVWR 13,800lbs, empty weight 2880lbs, payload 10,920 lbs
866-430-75393517 Wayne White Rd., Climax, NC 27233
www.jfwequipment.com
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • February 16, 2013 • Page 31
Dynapac USA3700 East 68th Avenue
Commerce City, CO 80022
Phone: 800-732-6762 Fax: 303-288-8828 www.dynapac.us
Authorized Dynapac Dealers
Dynapac’s CC 624F
and compaction performance...
Dynapac’s CC624HF double-drum, high frequency vibratory asphalt rollers offer complete compaction control including mat temperature, speed, blows per foot, and other exceptional features.
Designed to meet the needs of road contractors –
Dynapac – Providing Dynamic Compaction Solutions for over 70 years.
Brooks Tractorwww.brookstractor.com
Sun Prairie, WI608.837.5141Milwaukee, WI414.462.9790
West Salem, WI608.786.2644De Pere, WI
920.336.5711
Casey Equipmentwww.casey-equipment.com
Arlington Heights, IL847.437.8686
Lemont, IL630.257.1261Rockford, IL
815.332.8222
Columbus Equipment Company
www.columbusequipment.comColumbus, OH 614.443.6541Toledo, OH
419.872.7101 Cincinnati, OH513.771.3922
330.659.6681 Cadiz, OH
740.942.8871Dayton, OH
937.879.3154 Canton, OH
330.453.4521Painesville, OH 440.352.0452Piketon, OH
740.289.3757
Construction Machinery Company
www.cmcky.comOwensboro, KY877.683.2262Louisville, KY866.901.2262
Diamond Equipment www.diamondequipment.com
Bowling Green, KY270.781.1061Evansville, IN812.425.4428Mt. Vernon, IL618.242.2273
Terre Haute, IN812.299.4747
DMIDiesel Machinery, Inc.www.dieselmachinery.com
Sioux Falls, SD605.336.0411Aberdeen, SD605.725.4364Rapid City, SD605.348.7438
MacDonald Machinerywww.macdonaldmachinery.com
Lafayette, IN765.742.2080
Fort Wayne, IN260.747.1561
South Bend, IN574.271.0800
Indianapolis, IN317.856.3000
NCS Equipmentwww.ncsequipment.info
Hastings, NE402.462.2252Kearney, NE308.237.0777
Grand Island, NE308.398.0640Lincoln, NE
402.466.1550Bertrand, NE308.472.5077Columbus, NE402.562.1550
Logan Contractors Supplywww.logancontractors.com
Omaha, NE402.339.3900
Des Moines, IA515.253.9048Bettendorf, IA563.441.2949
Luby Equipmentwww.lubyequipment.com
Fenton, MO636.343.9970
Quincy, IL217.222.5454O’Fallon, MO636.332.9970
Cape Girardeau, MO573.334.9937
The Victor L. Phillips Co.www.vlpco.com Topeka, KS
785.267.4345Wichita, KS
316.838.3346Garden City, KS620.275.1996
Kansas City, MO816.241.9290
Joplin, MO417.781.8222
417.887.2729
Page 32 • February 16, 2013 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Calder Brothers Corporation250 E. Warehouse Ct. | Taylors, SC 29687
phone: (864) 244-4800 | fax: (864) 244-5007 | www.4aMauldin.com
Discover More Ways Mauldin Can Help You Become a Master of the Mat.
Mauldin’s 1750-C Super
Paver is ready for fast andhard action. Unmatched performance and durabilityset this heavyweight apart from all others.
Check the details atwww.4aMauldin.com.
M413XT
MG622
PrecisionSpray
Finkbiner Equipment Co.15 W 400 No. Frontage Rd.
Burr Ridge, IL 60527(630) 654-3700
Fax: (630) 654-3792www.finkbinerequipment.com
Miller-Bradford & Risberg, Inc.W250 N6851 Highway 164
Sussex, WI 53089(262) 246-5700
Fax: 262-246-5719Madison, WI
(608) 222-9191Eau Claire, WI(715) 832-3443DePere, WI
(920) 338-5800Abbotsford, WI(715) 223-2381Negaunee, MI(908) 475-4181
www.miller-bradford.com
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • February 16, 2013 • Page 33
The Worldwide Leader in Concrete Paving Technology
CONCRETE STREETS AND HIGHWAYS � AIRPORT RUNWAYS � CURB AND GUTTER � SIDEWALKSRECREATIONAL TRAILS � SAFETY BARRIER � BRIDGE PARAPET � BRIDGE DECKS � IRRIGATION CANALS
GOMACO CORPORATION IN IDA GROVE, IOWA, USA � THE WORLDWIDE LEADER IN CONCRETE PAVING TECHNOLOGY � 800-831-2320
[email protected] � www.gomaco.com
ROAD MACHINERY & SUPPLIES CO.Des Moines, IA
218/741-9011 • 800/555-1445Sioux City, IA
712/252-0538 • 800/633-9104Cedar Rapids, IA
319/363-9655 • 800/616-6615Milan, IL
309/787-1742 • 800/633-9114
SWANSTON EQUIPMENT COMPANY3450 West MainFargo, ND 58103
800/369-03712219 Elk Drive
Minot, ND 58107800/210-8766
Page 34 • February 16, 2013 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Road Machinery & Supplies Co.
5633 W Hwy 13Savage, MN952/895-9595800/888-9515
Duluth, MN218/727-8671800/888-9535
Des Moines, IA218/741-9011800/555-1445
Sioux City, IA712/252-0538800/633-9104
Cedar Rapids, IA319/363-9655800/616-6615
Virginia, MN218/741-9011800/752-4304
McAllister Equipment Co.12500 S. Cicero Ave.
Alsip, IL 60803708/389-7700
Villa Park, IL630/530-7600
Rockford, IL815/227-0555
East Peoria, IL309/694-4455
Springfield, IL217/789-0351
ROLAND MACHINERYSpringfield, IL217/789-7711Carterville, IL618/985-3399Portage, IN219/764-8080Bridgeton, MO314/291-1330
Cape Girardeau, MO573/334-5252Columbia, MO573/814-0083Palmyra, MO573/769-2056Eau Claire, WI715/874-5400DePere, WI920/532-0165Deforest, WI608/842-4151Franksville, WI262/835-2710Schofield, WI715/355-9898
2600 S. Lincoln Rd.Escanaba, MI906/786-6920
Fax: 906/786-5813
TITAN MACHINERY - BISMARK1500 Industrial Dr.Bismark, ND 58501
701/250-7925 • 800/247-1282Fax: 701/250-79243079 Energy Drive
Dickinson, ND 58601701/227-5309 • 888/418-2873
Fax: 701/225-90784001 38th Street SWFargo, ND 58104
701/237-3333 • 800/342-4330Fax: 701/237-3336
1601 North Washington St.Grand Forks, ND 58203
701/775-8111 • 800/962-7410Fax: 701/775-81085015 Hwy 2 EastMinot, ND 58701701/852-3188
1741 Deadwood Ave.Rapid City, SD 57702
605/388-0266 • 888/388-0266Fax: 605/388-92104201 N. Cliff Ave.
Sioux Falls, SD 57402605/336-3434 • 800/262-5373
Fax: 605/336-345613954 West Front StreetWilliston, ND 58801
701/577-0024 • 877/570-4635Fax: 701/577-0027
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • February 16, 2013 • Page 35
www.casey-equipment.com1603 East Algonquin Rd.
Arlington Heights, IL 60005847/437-8686
Fax: 847/437-8738
16754 New Ave. Lemont, IL 60439630/257-1261
Fax: 630/257-06141548 Huntwood Drive
Cherry Valley, IL 61016815/332-8222
Fax: 815/332-3056
RMS RENTALS12520 Quentin Ave S.
Suite 100Savage, MN 55378
952/895-9595800/888-9515
5633 W Hwy 13Savage, MN 55378
952/895-9595800/888-9515Duluth, MN218/727-8671800/888-9535
Virginia, MN218/741-9011800/752-4304Negaunee, MI906/475-6488800/888-9565
Sioux City, IA217/252-0538800/633-9104
Des Moines, IA515/282-0404800/555-1445
Cedar Rapids, IA312/363-9655800/616-6615
Milan, IL309/787-1742800/633-9114
CASEY EQUIPMENT COMPANY ROAD MACHINERY & SUPPLIES CO.
Page 36 • February 16, 2013 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
V 4 0 0 V E R T I C A L - L I F T S K I D L O A D E R
STRONGEST IN CLASS –
CUMMINS TURBO-DIESEL ENGINE –
VERTICAL-LIFT, HEAVY-DUTY BOOM –
ERGONOMIC CAB DESIGN –
KINGGOODFEELS
TO BE
Download co-op ads from the Gehl Ad Portal.Please visit www.gehl.com/ad
Alta Equipment Company28775 Beck Rd.
Wixom, MI 48393248-449-6700
Fax: 248-449-6701www.altaequipment.com2470 W. Columbia Ave.Battle Creek, MI 49015
269-965-1269Fax: 269-965-1881
8840 Byron Commerce SWByron Center, MI 49315
616-878-7450Fax: 616-878-76504716 Talono Ct. S.E.Kentwood, MI 49512616-698-2960
Fax: 616-698-29016327 Jomar Ct.
Lansing, MI 48917517-272-5033
Fax: 517-272-72575920 Grand Haven Rd.Muskegon, MI 49441231-798-9754
Fax: 231-798-938728855 Smith Rd.
Romulus, MI 48174734-641-8238
Fax: 734-641-83341524 Champagne Dr.Saginaw, MI 48604989-752-9400
Fax: 989-752-98347500 E. 15 Mile Rd.
Sterling Hts., MI 48312586-977-6000
Fax: 586-977-609928990 Wixom Rd.Wixom, MI 48393248-356-5200
Fax: 248-356-20299433 Riley St.
Zeeland, MI 49464616-748-4108
Fax: 616-748-4120
Logan Contractors Supply4101-106th Street
Des Moines, IA 50322515-253-9048
Fax: 515-253-94914114 State Street
Bettendorf, IA 52722563-441-2949
Fax: 563-441-29536544 L Street
Omaha, NE 68117402-339-3900
Fax: 402-597-06941325 S. Enterprise Dr.
Olathe, KS 66061913-768-1551
Fax: 913-768-1171
Elder Ag and TurfEast Palestine, OH330-426-2166
Custom Truck &Equipment7701 Highway 24
Kansas City, MO 64125800-861-1065
www.cte-equipment.com
Howell Tractor CompanyPeru, IL
800-342-6072Gary, IN
800-852-8816
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • February 16, 2013 • Page 37
THE COMPACTION EXPERTS
Our rollers are pretty basic.Basically perfect.BOMAG improves on perfection with the BW120AD-4 roller.Want a roller that will fi nish the job better, faster and more effi ciently? Then you want the BW120AD-4 from BOMAG. We took the top tandem-drum vibratory roller in its class and made it even better: A more powerful 33.8-hp diesel engine, a 14-percent faster working speed, and a larger operator’s platform with standard laterally sliding seat for better visibility. Improving perfection? That’s just the basics with BOMAG.
To do the best job, you need the best equipment.To learn more visit www.bomag-americas.com,
or call 1-800-78-BOMAG today.
1400 W. Ogden Ave.Naperville, IL 60563
630/355-7150
Rockford, IL815/961-3160
South Holland, IL708/331-6362
Wauconda, IL847/526-7700
Rockdale, IL815/730-9011
200 Erb Industrial Dr.Fenton, MO, 63026
636/349-0200
Foristell, MO636/463-2500
Cape Girardeau, MO573/334-0563
Cuba, MO573/885-0500
Owensboro, KY270/684-2339
Paducah, KY270/554-1131
Evansville, IN812/473-0484
Mount Vernon, IL618/244-6800
10874 East Pike Rd.Cambridge, OH 43725
740-432-6303www.southeast-ernequip.com
Evansville, IN 47715812-476-7321
Fort Wayne, IN 46808260-483-8868
Indianapolis, IN 46268317-872-4877
Burlington, KY 41005859-586-6133
Holt, MI 48842517-694-0471
Novi, MI 48374248-349-9922
Brilliant, OH 43913740-598-3400
Brunswick, OH 44212330-225-6511
Cambridge, OH 43725740-432-6303
Dublin, OH 43016614-889-1073
Gallipolis, OH 45631740-446-3910
Heath, OH 43056740-522-3500
Mansfield, OH 44903419-529-4848
Marietta, OH 45750740-374-7479
Mentor, OH 44060440-255-6300
Monroe, OH 45050513-539-9214
North Canton, OH 44720
330-494-3950
Perrysburg, OH 43551419-874-0331
Troy, OH 45373937-416-6397
Page 38 • February 16, 2013 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
DePere, WI920/532-0165
Deforest, WI608/842-4151
Franksville, WI262/835-2710
Schofield, WI715/355-9898
Eau Clair, WI715/874-5400
Escanaba, MI906/786-6920
Springfield, IL217/789-7711
Carterville, IL618/985-3399
Bridgeton, MO314/291-1330
Cape Girardeau, MO573/334-5252
Columbia, MO573/814-0083
Palmyra, MO573/769-2056
Portage, IN219/764-8080
100 Sheridan Ave.Des Moines, IA 50313
515/282-0404800/555-1445
2525 16th Ave SWCedar Rapids,
IA 52406319/363-9655800/616-6615
1400 North Hwy 75Sioux City, IA 51105
712/252-0538800/633-9104
606 W. 10th Ave.Milan, IL 61264309/787-1742800/633-9114
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • February 16, 2013 • Page 39
DePere WI920/532-0165
Fax: 920/532-0526Deforest WI608/842-4151Franksville WI 262/835-2710
Schofield WI 715/355-9898Eau Claire, WI715/874-5400Escanaba MI906/786-6920Springfield, IL217/789-7711
Marengo, IL815/923-4966Bolingbrook IL630/739-7474Carterville, IL618/985-3399Bridgeton, MO314/291-1330
Cape Girardeau, MO573/334-5252Columbia, MO573/814-0083Palmyra, MO573/769-2056Portage, IN
219/764-8080
ROLAND MACHINERY BRANDEIS MACHINERY & SUPPLY COMPANY1801 Watterson Tr.
Louisville, KY 40299502/491-4000 • Fax: 502/499-3195
www.brandeismachinery.comEvansville, IN
812/425-4491 • Fax 812/425-1171
Corbin, KY606/528-3700 • Fax 606/528-9014
Lexington, KY859/259-3456 • Fax 859/254-0783
Stanville, KY606/478-9201 • Fax 606/478-9208
Paducah, KY270/444-8390 • Fax 270/575-4907
Indianapolis, IN317/872-8410 • Fax 317/872-8417
Ft.Wayne, IN260/489-4551 • Fax 260/489-1620
Page 40 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 41
Sievers JCB406 Old Rt 66Hamel, IL 62046618-633-2622
8080 State Rt 16Hillsboro, IL 62049217-532-3222
State Rd 267 SouthGreenfield, IL 62044217-368-2486
14464 Shad RdCarlinville, IL 62626217-854-3191
Sievers JCB (cont.)1351 W Jackson StAuburn, IL 62615217-438-6111www.sieversjcb.com
YES JCB12011 W Silver Spring DrMilwaukee, WI 53225262-783-7510www.buyjcb.com
Rueter’s1132 31st AveCouncil Bluffs, IA 51401712-366-5221
2425 NE 126th AveElkhart, IA 50073515-367-3054
5815 Lincoln WayAmes, IA 50014515-268-0939
Hwy 30 WestGrand Junction, IA 50107515-738-2571
Rueter’s (cont.)23296 Hwy 30 EastCarroll, IA 51401712-792-9294
E Highway 275Neligh, NE 68756402-887-5638 www.ruetersjcb.com
JCB of Chicago1603 E Algonquin RdArlington Heights, IL 60005847-437-8686
16754 New AveLemont, IL 60439630-257-1261
1548 Huntwood DrCherry Valley, IL 61016815-332-8222www.jcbchicago.com
MH JCB106 Circle Freeway DrCincinnati, OH 45246513-681-2200
3306 Gilmore Industrial BlvdLouisville, KY 40213502-962-6560
5859 Raymond StIndianapolis, IN 46241317-240-6300www.mhjcb.com
Diesel MachineryInc.4301 N Cliff AveSioux Falls, SD 57104605-336-0411
3801 N Deadwood AveRapid City, SD 57702605-348-7438
39288 133rd StAberdeen, SD 57401605-725-4364www.dieselmachinery.com
Page 42 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Five Contracts Total $51M inCosts Funded By State Bonds“The job finished very well. Patience
sometimes can be the best tool to use to com-plete these jobs,” Huiras said. And with anod towards the tradesmen and MnDOTstaff working the project he added, “on thisjob they hit a homerun and had a touch-down.”“Driving through the job, it’s unbelievable
the quality of the work that was done,”Huiras continued. “Everything about theproject is great.”“The highway was in desperate need of
improvement in that area,” added Huiras.“The new highway is certainly going to savelives and it is a much safer route than before.It’s a win-win situation.”Mathiowetz crews relied on GPS technol-
ogy on their heavy equipment and on recy-cling to cut costs and make the project moreefficient.Along with local resources, “a lot of recy-
cled material was placed back into the proj-ect, a lot of the old roadway was recycledback into the new roadway and trees wereused for erosion control,” Huiras said.Mathiowetz Construction also relied on a
mix of employees on the job that were justout of trade schools along with a skilled setof local tradesmen, Huiras added.A highway project like this “puts a lot of
people to work. At any one time, there wereover 100 people out there and there wasprobably an average of 50 people a day onthe job,” said Huiras. “These highway proj-ects certainly generate a lot of payroll, a lotof wages for the employees.”Mathiowetz crews and their 21 subcon-
tractors and six material suppliers had a good
representation of equipment throughout theconstruction site.Included in this list were Cat 627 E and G
and 637 D scrapers, Cat D6 R, D6LGP, D5dozers, Cat 14 H, 14 G and 160 M bladesand a John Deere 750 dozer. For diggingwork, Mathiowetz brought in a Komatsu650 and Cat 345 excavator. Driving in andout of the site for hauling were John Deere40 ton trucks.Gregg Mathiowetz, vice president of R
and G Construction agreed that despite wetweather and the budget impasse, his workalso went well and road crews were able tomake up for the lost time.In 2011, “we had some wet conditions and
we had the government shutdown whichforced us to change the sequence of the proj-ect because of the time lost. We also had a lotof muck that took some extensive work toget out,” Mathiowetz said. “This year, wehad the dry conditions that helped bring theproject back on schedule.”MnDOT project engineer Bob Williams
echoed these comments and added that “theshutdown in July 2011, in the middle of thepeak construction season resulted in majorimpacts to the traveling public and signifi-cant impacts to multiple project schedules.” Along with the excavation and grading
work for 4 mi. (22.4 km) of new highway, Rand G Construction and its 14 subcontractorsare also placing new surfacing, storm sewer,sanitary sewer, water main, box culverts andlighting throughout the length of the project.Mathiowetz added that “we’ve taken all
of the concrete surfacing, the asphalt sur-facing and some of the existing granular
see MNDOT page 46
A Cat dozer dumps removals into the side dump of a Mack truck during excavationand grading operations for the Hwy 60 expansion in southwest Minnesota runningbetween a point 3 mi. (4.8 km) into Iowa to a point just north of Worthington, Minn.,15 mi. (24 km) in total.
MNDOT from page 28
ILLINOIS
IOWA
KANSAS
MICHIGAN
MINNESOTA
NORTH DAKOTA
WISCONSIN
kra PreillhcStabco BasltA
SOIINLLI
sreal Detacbo BdzeirohtAu
boBM
ijidemBidjimef Bt oacb
ATSONNEIM
par RadeCf t oacboBAOWI
mco.tabcobstlaa
eillvkroY
goaichCtseW
daonucaW
a nekoM
m RraF
bcob
cboB
bob
sdip
ramillW
lesDascnIt nempiuqe Etim R
mco.retsehrocfotabc
eillvtrawetSreteshco R ofatc
moci.djimebfotacb
nihcar Mate StihWASSNAK
omc.tacobobcxer
trpoenvaD
ytiCwaoI
notgnliruB
sidap RradeCpar RadeCf t oacboB
i SrT
qoenla
oworNuq EnoaL
la
oanL
rfa
yre
sdip
cnIt acboe Btati S
moc.doowrofnopiuq
aciremAgnou YododwooroNf otnmepiu
mco.piuqoenla
naorcorC.cnI,tneipmuq E
moc.piuqeeitrmr
oCtneipmuq EnotleraCNAIGHMIC
oc.yrehincamratsethiw
akepoT
anttahanM
ytiCdenraG
athiciWnihcar Mate StihW
t obB
acobb
acboBORN
sirt
L
yanpmo
mo
yre
Ikd Ff G
omc.skrofdnargfota
kea LslivDeekas Llivef Dt oa
ATTAOKA DHTOR
omc.tacobbetats
aadanClettiL
eillvsnruB
oc.tnempiuqetonelarc
oozmaalaK
nawigaS
retneCnyroB
ainvoLioCtneipmuq EnotleraC
tS-irTW
acobb
boB
acobb
t oacboB
m
yanpmo
nosduH
.cnI,atcbo BeattNISNCOISW
omc.skrofdnargfota
notsilliWnotsilli Wf otac
omc.skrofdnargfota
skrod FnarG.cnI, skrod Fnarf Gt o
sirt
omc.tacobbetats
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 43
Bobcat® and the Bobcat logo are registered trademarks of Bobcat Company in the United States and various other countries. ©2013 Bobcat Company. All Rights Reserved. | 0113716
Page 44 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Volvo Articulated Haulers Speed Mine 1000 Ft. UndergroundIn southeastern Missouri lies a metal-rich
region called the Viburnum Trend. The ore— which consists primarily of lead, withsmall amounts of zinc and copper mixed in— is buried 1,000 ft. (304 m) underground. To recover the metals, the ore must be
drilled, blasted, hauled to a shaft, lifted to thesurface, and processed in mills. The annualproduction of six mines in the area, complet-ed by the SEMO (Southeast Missouri)Mining and Milling Division of The DoeRun Company, totals approximately 5.5 mil-lion tons of ore. The first mine in the Viburnum Trend
opened in 1962. Other mines followed; atone time there were nine mines operated byfour different companies. After a series ofbuy-outs and mergers, those nine minesbecame six, all of which are now owned andoperated by The Doe Run Company. Today, four of the six mines are connect-
ed underground. One can climb into a min-ing truck at the north end of the Casteel Mineand drive south for 22 mi., traveling throughthe Buick, Brushy Creek and Fletcher mines.
Safety FirstSome 850 workers are employed at The
Doe Run Company mines, and safety is amajor part of their workplace culture. “Wehave a huge safety commitment,” said GregSutton, general mine manager at The DoeRun Company SEMO Mining and MillingDivision. “We want people to go homeevery day in the same shape they came in.We pride ourselves on being able to do that.”Here’s proof. Every year, the U.S. Mine
Safety and Health Administration presentsthe Sentinels of Safety Award, recognizingthe safest mines across the country in sever-al categories. In the fall of 2012, Doe RunCompany Sweetwater Mine and Mill earnedthe Outstanding Safety Performance in theLarge Underground Metal Mine category,marking the seventh time Sweetwaterreceived the recognition. Doe Run and itspredecessor companies have earned theSentinels of Safety award 25 times since1971.
Volvo Plays Its PartVolvo operators and the machinery that
supports their work play a big role in achiev-ing that safety record. The SEMO Divisionbegan running Volvo A30 trucks to move oreunderground in the mid 1990’s. “Within ayear or two, we moved into Volvo A35trucks at some of the other mines,” saidSutton. “In about 1999, we bought our firstA40 haulers. Today, 23 of the 45 haulers inthe four large mines are from VolvoConstruction Equipment.”Of the 23 Volvo machines, 19 are A40D
units. The four remaining are A40E FS fullsuspension haulers. Full suspension — an
exclusive Volvo feature — uses electronicsand nitrogen gas to help cushion the ride andlevel the load. “Full suspension absolutelyenhances our hauling production,” saidSutton. “It is easier on the truck and the oper-ator.”Sutton said Volvo suspension trucks also
help increase efficiencies in their operation.“Our speed limit underground for the non-full suspension trucks is 27 miles per hour,but we can bump that up to 29 with the fullsuspension units,” he said.
“The full suspension units are smoother,and the operators can handle them better.Because of that, I would estimate that we getbetween 5 and 10 percent more productionwith the full suspension trucks,” he added.
Underground to the GrizzlyThe average underground haul length is 2
mi. (3.2 km), one way, with a maximum hauldistance of 5 mi. (8 km). The 2-mi. cycles —including loading and dumping — can takea truck about 20 to 25 minutes to complete.The hauler travels from a mining face, wherethe blasted ore is loaded, to the grizzly,where it dumps its contents, back to the face.The grizzly is a hole guarded by spaced
steel bars, which feeds the ore to a lowerlevel, containing an ore crusher, or skippocket, or both, according to Sutton. A skippocket is an area where rock is loaded intothe skip, or steel box, to be hoisted to the sur-face. The SEMO Division uses the room-and-
pillar method of mining. The actual mined-out openings — widths of a drift —measureabout 32 ft. (9.8 m) wide. The pillars whichsupport the roof are approximately 28 ft. (8.5m) wide, with distances between the pillarsmeasuring about 60 ft. (18 m), center to cen-
ter. Drift heights measure anywhere from 10to 120 ft. (3 to 36.6 m) in one room. Theaverage width of an ore body is about 400 ft.(122 m), according to Sutton. In plain view,the pillars are checker-boarded over the orebody.
Drilling and BlastingTo drill holes for explosives at the mining
faces, the SEMO Division runs one- or two-boom jumbos. The booms are mounted on acarrier, resembling a center-articulated truckwith an engine, hydraulic system and electri-cal system. During drilling, the jumbo carri-er remains stationary and the booms move todrill holes averaging 14 ft. (4.3 m) deep.“In the four mines, we have about 200
faces with approximately 20 drills workingat any given time,” said Sutton. “We usuallyshoot twice a day, at the end of each 10-hourshift. Then, we do what is called mucking,which consists of loading the ore into haultrucks with front-end loaders. “Somewhere in the middle of the muck-
ing process, we have to scale the blastedfaces because anytime you blast you makeloose rocks,” he said. “We don’t want looserocks to fall down unexpectedly, so we haveto knock the loose rocks down, or scalethem, before somebody gets under them.”With hand scaling, a worker knocks downloose rocks with a pry bar. Mechanicalscalers use a truck with a boom-and-picksystem.“Every day, in multiple faces, we are
drilling, blasting, mucking, scaling, andmore,” continued Sutton. “And we keep upwith our utilities such as power and ventila-tion. At any given time, we are completingall of these tasks at one of our mines.”Each of The Doe Run Company mines
contain ore hoists with skips in the shaft. Theore hoist sits on the surface and raises andlowers the skip. The loaded skip travels upthe shaft to the surface, where a trippingmechanism opens the skip door to dump theload.When primary mining is complete, the
SEMO Division uses specialized drills toremove pillars that are left behind. “Wecome back and evaluate the area for what wecall pillar recovery,” said Sutton. “Pillarrecovery is about 30 percent of our produc-tion. We use remote control equipment totake out what pillars we can after we’re fin-ished with primary mining.”
Volvo PerformanceSutton said the Volvo articulated haulers
perform well for his operation. “We havebeen working with Volvo trucks for nearly15 years, and they have made a number ofmodifications over the years to make thembetter for our application,” he said. The SEMO Division puts up to 15,000
hours on a Volvo articulated hauler beforesending it to the dealer for rebuilding. “Wetake the hauler apart underground and pullthe parts up to the surface,” said Sutton.“Our dealer, Rudd Equipment, takes thetruck to the shop and tears it down to theframe. They fix problems with the frame, ifany exist, and rebuild the engine and entiredrivetrain. We get excellent service fromRudd Equipment, our Volvo dealer,” saidSutton. “They do a good job of keeping ourtrucks running.”
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)CEG
Volvo operators and the machinery that supports theirwork play a big role in achieving that safety record.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 45
Murphy Tractor &Equipment Co. Inc., willnow represent theDoppstadt US brand atadditional locations.Doppstadt is a recycling andprocessing equipment com-pany which carries a widevariety of product lines,including: slow speedshredders, high speedgrinders and trommelscreens. It currently repre-sents Doppstadt in Kansas, Nebraska,Iowa and western Missouri, and willnow carry this product line at the fol-lowing stores in Columbus, Cincinnati,Vandalia, Lima, Chillicothe andCambridge, Ohio, and CranberryTownship and Delmont, Pa.“We believe the future potential for
this product line is excellent, as ourcountry gets more involved in recy-cling resources, and the need to mini-mize the volume of products goinginto landfills rises. Doppstadt productsare very high quality, and engineered
for efficient long-life operation, to helpour customers be more profitable,”said Bill Buckles, vice president ofsales. Murphy Tractor and Equipment Co.
Inc., one of the largest constructionequipment dealer organizations, isheadquartered in Park City, Kan. Theorganization has 28 locations through-out the states of Iowa, Kansas,Missouri, Ohio, Pennsylvania andNebraska. For more information, visit
www.murphytractor.com.
Murphy Tractor & Equipment Co. toRepresent Doppstadt US in Midwest
The Doppstadt DW3060K shredderis used for many applications,including the processing of MSWwaste and reduction of land-clear-ing waste.
The Doppstadt AK530 grinder isintended to process lumber andgreen waste, as well as land-clear-ing material, in order to produce asellable product.
The Doppstadt SM726 trommel is used forproducing topsoil and separating waste.
©2013 The Charles Machine Works, Inc.
Only Orange.
FREE
FREECALL FOR A
DEMO
WWrt
amount of efforiV
FREECALL FOR A
DEMO
e DereF-tles A Bao HhWy raising ground clearance,ve raised the bar be’W
veoand ,cyncie�fee,iflk cavolved in operatingt inamount of effor
o se tnil-sk/moc.hctiwhctit disi
. Noetiht W? Nongise De lift capacityy raising ground clearance,
so ale ve’Wnce. amforrperall vicing and maintaining the ne ser,volved in operating
mrofreptue ognarw Ooe heo s
. det R. No na OrynlO operator comfor ground speed,, lift capacity
ng ilowerby bar the ed israso w SK750 and SK755. vicing and maintaining the ne
.sm
.egnt, operator comfor
he tng w SK750 and SK755.
Inc.ks,orles Machine W©2013 The Char
Inc.
2921 Twin City DriveMandan, ND 58554-3800
877-663-9551
1100 Main Avenue WestWest Fargo, ND 58078
701-282-3600
Page 46 • February 16, 2013 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide
Ritchie Bros. Auctioneers will be holding its first unre-served public auction in China on April 18, 2013. In additionto securing an official auction date, the company has startedreceiving its first consignments, which include a mixture ofunused international and local equipment. Current equip-ment highlights include an unused 2010 Kato HD820Vhydraulic excavator; a 2009 Caterpillar 320D-E hydraulicexcavator; and a 2007 Caterpillar D7G Series II crawler trac-tor. The announcement came shortly after the company’s ini-
tial announcement in November 2012, during a press con-ference at bauma China, where Ritchie Bros. announced thatit will bring the certainty of unreserved auctions to Chineseequipment buyers and sellers now that the company’sWholly Owned Foreign Enterprise application had beenapproved by the Chinese government.“Now that we have received approval from the Chinese
government, we are excited to open up the global heavyequipment market to Chinese equipment owners,” saidStephen Branch, vice president, Ritchie Bros. Auctioneers.“Our global heavy equipment network is more than 50 yearsin the making. Today, it consists of more than 40 auctionsites around the world, an industry-leading Web site and asuite of value added services that make our auctions a one-stop-shop for heavy equipment buyers and sellers. Weencourage local and international equipment owners to par-ticipate in this truly global event by contacting our Beijingoffice — April is just around the corner.”One of the first local sellers to consign equipment to the
upcoming Beijing unreserved public auction is Xie Qianbo,owner of Shanghai Jin Jichang Engineering Machinery Co.Ltd. — a Shanghai-based heavy equipment dealer.“I have known Ritchie Bros. for many years now and
have attended their auctions outside of China,” said Xie. “Ihave seen with my own eyes the attraction power thatRitchie Bros. has. They have the power to bring legitimatebuyers from around the world who need to buy my machinesin order to put them to work right away. This is why we areselling our equipment at the first ever Ritchie Bros. auctionin China. The process is simple and trustworthy.”Ritchie Bros. has formally leased land in the Tianzhu Free
Trade Zone (Shunyi, Beijing) in preparation for this firstunreserved public auction in China. Strategically locatedwithin minutes of Beijing Capital International Airport, theTianzhu Free Trade Zone is connected to one of China’slargest roll-on, roll-off ports in Tianjin. “For many years we have been learning China’s market,
customer needs and behaviors,” said Chris Edwards, RitchieBros. general manager of China, Korea and Mongolia. “It’sexciting that we are about to introduce the unreserved auc-tion process in China, which we believe is the most fair andtransparent way for heavy equipment buyers and sellers toconduct business.”For more information, visit www.rbauction.com.
Ritchie AnnouncesFirst China AuctionDate for April 2013
damage for which others on construc-tion projects are at fault. “The Court of Appeals erred in its
interpretation of the indemnity clausein the ECI/Bolduc subcontract,” ASAwrote. “This Court should correct thiserror by holding ... that the Bolduc/ECIindemnity clause did not include ECI’sown fault or negligence, but onlyextended to the fault or negligence ofBolduc for which ECI may be liable.”L.H. Bolduc was a subcontractor on
a sewer and water project. During theconstruction process, the sewerpipeline suffered damage at the direc-tion of the general contractor. The gen-eral contractor repaired the pipeline andthen sought reimbursement from thesubcontractor and the subcontractor’sinsurance company. Both refused.At trial, a jury sided with the sub-
contractor, saying the subcontractorwas not negligent. After the verdict, adistrict court also found that the sub-contractor was not required to indemni-
fy the general contractor from damagesthe general contractor suffered due toits own negligence and that the insurersimilarly did not agree to provide insur-ance against anything other than claimsarising from the subcontractor’s workor negligence. But on appeal, a court issued a split
decision, holding that the subcontract’sindemnity clause required the subcon-tractor to “both indemnify for another’snegligence and insure that risk.”The dissenting judge in the case said
that Minnesota’s anti-indemnity statuteprohibits the subcontractor fromindemnifying the general contractor forits own negligence and concluded thatthe subcontract did not clearly andunambiguously require that the sub-contractor indemnify and insure thegeneral contractor for the general con-tractor’s negligence.ASA said in its brief that Minnesota
state legislators and courts enacted thestate’s anti-indemnity statute specifical-ly to curtail risk-shifting and make par-ties responsible for their own — not
others’ — mistakes: “The legislativehistory of Minn. Stat. §337.02 reflectsthe Legislature’s determination that theprohibition of such broad form indem-nity clauses would lead to greater safe-ty in the workplace. The anti-indemni-ty statute also recognizes the imbalancein bargaining power that exists betweencontractors and subcontractors, whichleads to unfair subcontract terms,including broad form indemnity …Thus, there is a strong public policy,emanating from both case and statuto-ry law, in favor of making each partici-pant in a construction project responsi-ble for its own negligence or fault.”ASA’s Subcontractors Legal
Defense Fund financed the brief in thiscase.Founded in 1966, ASA amplifies the
voice of, and leads, trade contractors toimprove the business environment forthe construction industry and to serveas a steward for the community,according to the organization. For more information, visit
www.sldf.net.
Legislators Enact State Statute to MakeParties Responsible for Own Mistakes
SUBCONTRACTORS from page 1
MnDot to Take Bids This Spring toUpgrade Last Two Segments of Hwy 60material and having a sub-contractorcrush it and make it into a Class VIIproduct to be re-used back on the proj-ect.”Some of the notable quantities for
this stretch of road work included theremoval of 292,000 cu. yd. (223,380 cum) of muck, the removal of 53,400 sq.yd. (44,856 sq m) of bituminous pave-ment, close to 3,000,000 cu. yd.(2,295,000 cu m) of common excava-tion and embankment 47,500 sq. ft.(4,420 sq m) of sheet piling and thou-sands of cu. yds. of concrete pavementpoured.For this type of heavy construction,
R & G Construction had a variety ofCat equipment and Mack trucks on thisproject to get the work done. Some ofthe Cat equipment brought into actionfor the project included 627G scrapers;D7RLGP, D6RLGP, D8R, D9RLGPCat dozers; 14M and 14G motor-graders and 345 excavators, 980Gloaders and with most of the equipmentequipped with GPS units.
Approximately 12 to 20 Mack truckswith side-dump trailers hauled theremovals and aggregates for the proj-ect.Because of the highway expansion,
the Union Pacific Railroad bridgecrossing over Hwy 60 had to bereplaced to accommodate the new, 4lane divided highway configuration,Williams said. Though constructionwent well, it “was impacted by a majordelay in the fabrication and delivery ofthe steel girder assemblies.” Built adjacent to the existing bridge
to keep the track online, the new bridgewas opened to railroad traffic just lastfall. Lunda, though, “is still on site con-structing retaining walls on the southside of the bridge in anticipation oftemporarily re-opening Hwy 60 under-neath to traffic” by February of thisyear, Williams said. While under construction, traffic
was maintained under the bridge toaccommodate access to local business-es and also to accommodate materialhauling for the road construction work,
Williams added.Along with fencing and surface fin-
ishes, major remaining bridge relatedwork includes grading of the abutmentareas, removal of steel sheeting, andretaining wall construction on threeends of the abutments.To make room for the expanded
highway in some places, homes andbusinesses were either demolished orcompletely moved to new locations.As spring approaches, R & G
Construction crews will pick up wherethey left off last year and complete bythis fall the most southern segment ofthe Hwy 60 road expansion. At thesame time, MnDOT will take bids toupgrade the last two segments of Hwy60 to four lanes between St. James andWindom, Minn. to make for a safer andmore efficient highway serving thesouthwestern communities ofMinnesota.
(This story also can be found onConstruction Equipment Guide’sWeb site at www.construc-tionequipmentguide.com.) CEG
MNDOT from page 42
Construction Equipment Guide • Parts Section • www.constructionequipmentguide.com • February 16, 2013 • Page 47
Quality Heavy Equipment Parts,Responsive Service and Competitive Pricing.
www.h-eParts.com
Atlanta/Eastern800-438-2699
Des Moines/Western800-426-4136
Florida/Export305-477-8000
SERVING YOU WITH QUALITY SINCE 1932
11:03 AM Page 1
Page 48 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION�EQUIPMENT�GUIDE�•�www.constructionequipmentguide.com�• February�16,�2013�•�Page�49
www.johndeere.com
You asked. We delivered. Our D-Series SkidSteers are loaded with customer-recommendedenhancements, like larger operator stations,quiet pressurized cabs with best-in-class visibility, and curved-glass swing-out doors. D-Series innovations include an exclusive cooling system with available hydraulically driven variable-speed fan that reverses to clear core-clogging buildup. Plus options suchas electrohydraulic joysticks, variable boomand bucket speed settings, and more than 100 attachments to let you take on more tasks.
Packed full of best-in-class productivity anduptime-enhancing features, the D-Series aredestined to become owner and operatorfavorites. Ask for a demo today.
The Difference is in the D-tails.
www.erbequipment.com
Fenton, MO 63026636/349-0200
Cape Girardeau, MO 63703573/334-0563
Foristell, MO 63348636/673-2131
Cuba, MO 65453573/885-0500
Mt. Vernon, IL 62864618/244-6800Paducah, KY270/554-1131Owensboro, KY270/684-2339Evansville, IN812/473-0484
8331 Meade Springer Rd.Ashland, KY 41102606/928-3477195 Sykes Blvd.
Pikeville, KY 41502606/432-0321
105 Tennis Center Dr.Marrietta, OH 45750
740/373-5255P.O. Box 629
Cowen, WV 26206304/226-3299
Fax:�304/226-3067
PO Box 1220Beaver, WV 25831304/255-1525PO Box 1547
Elkins, WV 26241304/636-6421
19 Goff CrossingCross Lane, WV 25313
304/204-1818
www.westsidetractorsales.com1400 W. Ogden AveNaperville, IL 60563
630/355-7150Fax: 630/355-7173South Holland, IL708/331-6362Rockdale, IL815/730-9011Wauconda, IL847/526-7700Rockford, IL815/961-3160South Bend, IN574/232-1461Lafayette, IN765/447-6933
Sioux City, IA 800/352-4693Waterloo, IA 800/772-2019Dodge City, KS800/794-0172Great Bend, KS800/264-4056Topeka, KS800/279-6087���Ulysses, KS800/472-9238Park City, KS800/262-0139Kansas City, MO888/306-3434Springfield, MO888/306-2656
Gering, NE800/205-6784
Grand Island, NE800/868-4017Lincoln, NE800/416-5518North Platte, NE800/894-7060Omaha, NE800/416-5095Brunswick, OH800/716-9796Canton, OH866/235-0438��Cincinnati, OH800/844-3734Columbus, OH800/222-2010
Lima, OH800/423-7445Poland, OH866/503-7259Vandalia, OH800/233-4228Cambridge, OH740/439-2747Chillicothe, OH740/663-5300Painesville, OH866/800-1398
Cranberry Twp, PA724/776-3636Delmont, PA724/837-4500
www.murphytractor.comwww.lec1.com
Page 50 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Fabick CAT Announces 2013Landscaping Industry DaysFabick CAT will host the 2013
Landscaping Industry Days in the new addi-tion to its Fenton, Mo., facility March 14 toMarch 15.The Landscaping Industry Days
is a free event which will give land-scape professionals the opportunityto connect with local vendors show-casing the most recent equipment,tools, and products aimed at helpinggrow and maintain commercial andresidential landscapers. “This event will be a success,”
said Chris Burns, Fabick CAT gen-eral sales manager, “The Landscape IndustryDays will allow vendors to showcase newproducts and ideas that the landscapingindustry has to offer resulting in new rela-tionships and business growth.” Attendees include large and small compa-
nies in the surrounding areas that performmany aspects of the industry.The event will feature demos, food, prizes
and hourly raffles. The Landscaping
Industry Days event will allow vendors tonetwork and connect with landscapers forfuture partnership and subcontractor oppor-tunities.
Some of the vendor specialties include:block and stone production, landscape light-ing, mulch and composting products, irriga-tion and mid-sized truck and trailer supply.All of the vendors are local companies andcan provide St. Louis landscapers with theservice capabilities and supplement servicesthey are looking for.For more information, call 1/866-283-
8751 or visit [email protected].
“This event will be a success.”
Chris BurnsFabick CAT
Road Machinery Names NewGeneral Manager for Iowa, Ill.Road Machinery & Supplies Co.,
a Savage, Minn., based heavyequipment distributor, hasannounced the recent addition ofChuck Gallagher as the generalmanager of its Iowa and Illinoislocations. Gallagher brings to RMS 30
years of business managementexperience. Chuck entered the con-struction equipment industry in2000 and has held various positionsincluding used equipment manager,product support manager, rentalmanager and sales manager. “RMS has exceptional people,”
said Gallagher. “Every location iswell represented by an experiencedstaff that genuinely cares aboutserving the needs of our customersand each other. I am honored to jointhis team and assist them in achiev-ing all we can through great cus-tomer experiences.”For more information, visit
www.rmsequipment.com.
Road Machinery & Supplies Co., a Savage,Minn., based heavy equipment distributor, hasannounced the recent addition of ChuckGallagher as the general manager of its Iowaand Illinois locations.
The Missouri Highways andTransportation Commission selected thePage Constructors Joint Venture to be theDesign-Build contractor for the final phaseof Route 364 Page Avenue Phase 3. The $118.2 million project will build 9
mi. (15 km) of four lane divided highwayfrom Route 94 in St. Peters to I-64 in LakeSaint Louis. “The Page Constructors proposal pro-
vides a great project that meets all of ourneeds and the needs of St. Charles County,”said Commission Vice-Chair Grace Nichols. “The citizens of St. Charles County have
been waiting for decades to see the comple-tion of Page Avenue. We couldn’t have donethis without the excellent partnershipbetween the Commission, St. CharlesCounty and the municipalities to fund thisproject.” MoDOT St. Louis District Engineer Ed
Hassinger added, “Their proposal providesthe most improvements for our budget. Theentire new four-lane highway will open inFall 2014, ahead of our schedule. Theimpacts to the public during constructionwill be very minimal.”The Page Constructors schedule for build-
ing Route 364 has minimal traffic impactson I-64 and Route 94 as well as the majorcross streets of Bryan Road and Route K.• Construction begins early summer 2013• Gutermuth Road over Route 364 com-
plete Aug. 30, 2013• Bryan Road over Route 364 complete
Nov. 1, 2013.• Route 364 opens to traffic in three sec-
tions, 2014• I-64 to Bryan Road — Aug. 30, 2014• Bryan Road to Route K — Oct. 1, 2014• Route K to Route 94 — Oct. 31, 2014“The contractors hit a grand slam,” said
Steve Ehlmann, St. Charles County execu-tive. “This is going to be a fantastic project.
We got nearly everything we were hopingfor and a great deal more than expected.”“Page Constructors is very excited to be
selected by MoDOT and St. Charles Countyto build such an important project for thecommunity,” said Page Constructors projectmanager Brian Carlson. “We've worked very hard to come up with
a design that should provide a high qualityfacility from the day it opens and beyond.Our team of local contractors is equippedand ready to go to work.”Fred Weber Inc., Millstone Bangert Inc.,
and Kolb Grading have come together tooperate as Page Constructors LLC for theRoute 364 Page Phase 3.
The lead designer is ParsonsTransportation Group with design supportfrom Horner & Shifrin. The team will pursuesubcontracting to Disadvantaged BusinessEnterprise companies for 18 percent of theconstruction work and 20 percent of the pro-fessional services work. Workforce goalsalso include a 14.7 percent minority and 6.9percent female workers per trade.The funding for Route 364 Page Phase 3
is a cost-share project with MoDOT, St.Charles County and the local municipalitiesin St Charles County. The City of O’Falloncontributed additional funding as well as theCity of Dardenne Prairie. The fundingbreakdown is as follows:• Total Cost Route 364 Page Phase 3:
$118,200,000 • $61,200,000 from MoDOT• $27,750,000 from St Charles County’s
1/2 Cent Transportation Sales Tax Fund• $25,000,000 from federal local surface
transportation funds.• $2,250,000 from the City of O’Fallon• $2,000,000 from the City of Dardenne
PrairieFor more information, visit
www.modot.org/route364.
“The citizens of St. Charles County have been waiting fordecades to see the completion of Page Avenue. Wecouldn’t have done this without the excellent partnershipbetween the Commission, St. Charles County and themunicipalities to fund this project.”
Grace NicholsMissouri Highways and Transportation Commission
Page Constructors Selected to Build Route 364 Page Phase 3
Page 52 • February 16, 2013 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide
Hydraulic300.9D 13 (9.6) 2,060 (935) 9.8/5.5 (3,028/1,731)
302.7D CR 20.7 (15.2) 5,886 (2,670)15/16.4 (380/419)
305E CR 40.2 (30) 11,217 (5,008)19.6/12.0 (6.0/3.7)
308.E CR SB 65 (48.5) 18,371 (8,333)24.8/15.4 (7.5/4.7)
312E L 90 (67) 29,430 (13,350)28.3/19.8 (8.6/6.0)
314E LCR 89 (67) 32,600 (14,800)28.5/19.5 (8.7/5.9)
320E L 153 (114) 48,940 (22,200)35/24.8 (10.68/7.58)
321D LCR 148 (110) 53,704 (24,360)32.0/22 (9.75/6.68)
329E L 232 (173) 69,958 (31,279)35/23.8 (10.68/7.25)
336E H 308 (230) 82,000 (37,200)38.4/26.8 (11.72/8.19)
390D L3 523 (390) 194,500 (88,225)56.6/38.8(17.25/11.81)
Mass Excavators324E L ME 194 (145) 57,997 (26,307)
336E L ME 316 (236) 85,300 (38,700)
390D L ME 523 (390) 195,000 (88,447)
Super Long Reach Excavation
320E L SLR 153 (114) 51,810 (23,500)51.5/38.3 (15.7/11.7)
329E L SLR 232 (173) 38,200 (30,900)60.3/48.2 (18.4/14.7)
Wheel HydraulicM313D 128 (95) 35,715 (16,200)
30.3/18.9 (9.21/5.75)
M316D 158 (118) 42,328 (19,200)31.4/19.9 (9.56/6.07)
M322D 165 (123) 49,604 (22,500)34.3/21.9 (10.45/6.67)
CATERPILLARMODEL ENGINE OPERATING WEIGHT MAX REACH/
HP (KW) LBS. (KG) DEPTH FT.-IN. (M OR MM)
ALSO VISIT WWW.CONSTRUCTIONEQUIPMENTGUIDE.COM
FOR ALL EQUIPMENT LISTINGS.
Despite efforts by Construction Equipment Guide to contac
t all the
manufacturers of excavators, not all of them appear in this
chart.
see CHART page 54
CrawlerDX60R* 53 (39) 13,206 (5,990) 13.6 (4.1) 20.3 (6.2)
DX140LCR 108 (81) 32,408 (14,700) 19.7 (6) 28.5 (8.7)
DX180LC-3* 125 (93) 41,248 (18,710) 20 (6.1) 29.4 (8.9)
DX225LC-3 SLR* 167 (124) 54,564 (24,750) 38.3 (11.6) 50 (15.265)
DX255LC-3* 185 (138) 56,659 (25,700) 22.3 (6.8) 33.4 (10.2)
DX300LC-3 SLR* 213 (159) 68,167 (30,920) 45.3 (13.8) 57 (17.4)
DX420LC-3* 362 (270) 94,503 (42,866) 25.4 (7.7) 37 (11.3)
DX530LC-3 SLR* 389 (290) 118,454 (53,730) 49.6 (15.5) 63.8 (19.5)
WheelDX55W-3* 55 (40) 12,236 (5,550) 11.5 (3.5) 20 (6.1)
DX190W-3* 176 (132) 41,446 (18,800) 18.8 (5.7) 30.3 (9.2)
DX210W 170 (127) 45,667 (20,714) 20.5 (6.2) 32.8 (10)
Log LoaderDX225LL 155 (115) 65,036 (29,500)
SLR= super-long reach
*Excavators have an iT4 compliant diesel engine
.
DOOSANMODEL ENGINE OPERATING WEIGHT DIGGING DEPTH DIGGING REACH
HP (KW) LBS. (KG) FT. (M) FT. (M)
ZX17U-2 14.8 (11) @2,400 rpm 4,173 (1893) 7.75 (2.37) 13.4 (4.08)
ZX35U-3 28.6 (21.3) @ 2,400 rpm 7,760 (3,520) 11.4 (3.45) 18.1 (5.52)
ZX60USB-3 54 (40.5) @ 2,000 rpm 13,563 (6,193) 13.5 (4.12) 21.5 (6.56)
ZX75US-3 54 (40.5) 17,743 (8,048) 15.1 (4.61) 22.7 (6.92)
ZX130-5 72 (97) 56,167 (21,110) 19.92 (6.06) 28.42 (8.67)
ZX180LC-5 121 (90) 40,149 (18,350) 23.2 (7.07) 32.7 (9.94)
ZX210LC-5 159 (119) 47,137 (21,400) 21.1 (6.68) 32.6 (9.92)
ZX245USLC-5 159 (119) 56,167 (25,500) 22 (6.7) 32.8 (10.01)
ZX870LC-5 532 (397) 193,255 (87,659) 31.4 (9.57) 57.6 (17.56)
EX1200-6 front shovel 760 (567) 251,327 (114,000) 15.7 (4.78) 37.8 (11.5)
EX1900-6 front shovel 1,086 (810) 421,075 (191,000) 19.4 (5.91) 44.0 (13.43)
EX2600-6 backhoe 1,500 (1,119) 560,000 (254,012) 27.0 (8.22) 54.5 (16.61)
EX5600-6 front shovel 3,000 (2,238) 1,175,000 (532,971) 15.8 (4.81) 55.8 (17.00)
EX8000-6 BE backhoe 3,888 (2900) 1,787,900 (811,000) 13.4 (4.1) 60.6 (18.5)
HITACHIMODEL ENGINE OPERATING WEIGHT DIGGING DEPTH DIGGING REACH
HP (KW) LBS. (KG) FT. (M) FT. (M)
904C 36.3 (27.1) 8,818 (4,000) 10.2 (3.1) 17 (5.2)
908C 76 (56.6 16,976 (7,700) 13.7 (4.1) 20.4 (6.2)
915D 110 (82) 33,069 (15,000) 19.3 (5.9) 28.2 (8.6)
922D 155 (116) 50,000 (22,680) 21.7 (6.6) 31.8 (9.7)
936D 280 (209) 81,600 (37,000) 24.0 (7.34) 35.8 (10.9)
LIUGONGMODEL ENGINE OPERATING WEIGHT DIGGING DEPTH DIGGING REACH
HP (KW) LBS. (KG) FT. (M) FT. (M)
CX17B 15 (11) 3,638 (1,650) 7.8 (2.37) 13.5 (4.12)
CX27B 21 (16) 5,556 (2,520) 9.2 (2.79) 16 (4.89)
CX36B 28 (21) 7,958 (3,610) 11 (3.35) 18 (5.50)
CX55B 39 (29) 12,295 (,577) 12.8 (3.91) 18.9 (5.76)
CX80C MSR 55 (41) 18,800 (8,510) 13.6 (4.18) 23.3 (7.09)
CX145C MSR 100 (75) 33,420 (15,200) 19.7 (6.01) 28.5 (8.74)
CX235C MSR 160 (119) 56,900 (25,800) 21.6 (6.65) 32.3 (9.85)
CX130C 100 (75) 28,100 (12,800) 19.8 (6.06) 28.7 (8.77)
CX210C LR 160 (119) 50,900 (23,100) 39.3 (12.10) 51.3 (15.60)
CX300C 207 (154) 66,350 (30,100) 24.8 (7.58) 36.5 (11.16)
CASEMODEL ENGINE OPERATING WEIGHT DIGGING DEPTH DIGGING REACH
HP (KW) LBS. (KG) FT. (M) FT. (M)
Terex TC16 18 (13.3) 3,638 (1,650) 7.8 (2.4) 13.4 (4.1)
Terex TC29 24 (17.5) 6,285 (2,850) 9.6 (2.96) 16.3 (4.99)
Terex TC35/TC35E 30 (22) 7,720 (3,800) 11.8 (3.6) 18.8 (5.7)
Terex TC37 30 (22) 8,047 (3,650) 11 (3.38) 18.5 (5.68)
Terex TC48 39 (29) 10,320 (4,650) 12.8 (3.9) 20.3 (6.2)
Terex TC75 76 (56) 16,538 (7,500) 14.6 (4.44) 24.4 (7.4)
Terex TC125 100 (75) 27,558 (12,500) 15.3 (4.67) 27.2 (8.28)
TEREXMODEL ENGINE OPERATING WEIGHT DIGGING DEPTH DIGGING REACH
HP (KW) LBS. (KG) FT. (M) FT. (M)
Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 16, 2013 • Page 53
www.hyundaiamericas.com
Industry’s Best Total Coverage Warranty: 3-year / 3,000-hour full machine warranty & 5-year / 10,000-hour structural warranty
H
Y U N D A
I
W
AR R A N
TY
VALUECash is king – Make more money & spend less with Hyundai 9 Series machines.• More Standard Features
• Industry-Best Total Coverage Warranty
• Hi-mate Remote Management service – FREE for 3 years
• Industry-Leading Fuel Economy
• Industry-Leading Cycle Times
ILLINOISBurris Equipment Company
Joliet • 815-464-6650 Ingleside • 815-363-4100Waukegan • 847-336-1205
Diamond Equipment17035 N. Illinois Hwy. 37Mt. Vernon, IL 62864
618-242-2273800-388-6396
Fax: 618-242-9161
Diamond Equipment1060 Diamond Ave.Evansville, IN 47711
812-425-4428dmfortune
@diamondequipment.comwww.diamondequipment.com
2000 Harlan DriveTerry Haute, IN 47802
812-299-4747888-343-4747
Fax: 812-299-3687
Hardings Heavy Equipment109 W. Commercial Ave.
Lowell, IN 46356219-696-8911
Rueter’swww.rueterco.com1132 31st Ave.
Council Bluffs, IA 51401712-366-5221
Fax: 712-366-5228
5815 Lincoln WayAmes, IA 50014515-268-0939
Fax: 515-268-0943
Hwy 30 WestGrand Junction, IA 50107
515-738-2571Fax: 515-738-2343
Hwy 30 EastCarroll, IA 51401712-792-9294
Fax: 712-792-6808
2425 NE 126th Ave.Elkhart, IA 50073515-367-3054
KANSASThe Victor L. Phillips Co.
4100 Gardner Ave.Kansas City, MO 64120
816-241-9290Garden City • 620-275-1996 Topeka • 785-267-4345 Wichita • 316-838-3346
KENTUCKYDiamond Equipment1046 Lovers Lane
Bowling Green, KY 42103270-781-1061800-489-1061
Fax: 270-781-0907
MICHIGANMidland Engine
Midland • 989-631-4608
MINNESOTATitan Machinery
Rosemount • 651-423-2222
NEBRASKARueter’s
www.rueterco.comE. Hwy 275
Neligh, NE 68756402- 887-5638
Fax: 402-887-5638
MISSOURIThe Victor L. Phillips Co.
4100 Gardner Ave.Kansas City, MO 64120
816-241-9290Brookline Station417-887-2729
Joplin • 417-781-8222
WISCONSINTitan Machinery
La Crosse • 608-788-1025
INDIANA IOWA
Page 54 • February 16, 2013 • www.constructionequipmentguide.com • Excavators & Attachments Section •
ALSO VISIT WWW.CONSTRUCTIONEQUIPMENTGUIDE.COM
FOR ALL EQUIPMENT LISTINGS.
Despite efforts by Construction Equipment Guide to contac
t all the
manufacturers of excavators, not all of them appear in this
chart.
CHART from page 52
K008-310.3 (7.68 ) 2,200 (997.9) 5.8 (1.76)
KX41-3V17.0 (12.67) 3,693 (1,675.1)
7.8 (2.37)
KX121-3S 6-in-1Blade40.5 (30.20) 9,789 (4,440.7) 11.6 (3.53)
KX057-447.6 (35.49) 12,150 (5,511.2) 12.7 (3.87)
KX080-3 Standard Boom70.0 (52.19) 18,254 (8,279.9) 15.11 (4.60)
KX080-3 Super Double Boom70.0 (52.19) 19,379 (8,790.2)
15.7 (4.78)
U1717.0 (12.67) 3,814 (1,730) 7.7 (2.34)
U25S20.9 (15.58) 5,625 (2,551.5)
9.3 (2.83)
U35S229.6 (22.07) 8,025 (3,640.1) 10.4 (3.16)
KX080-467.3 (50.16) 18,254 (8,279) 19.7 (6.00)
U-35-423.9 (17.81) 8,129 (3,687) 14.4 (4.38)
KX018-417 (12.67) 3,747 (1,699) 7.8 (2.37)
KUBOTAMODEL ENGINE OPERATING WEIGHT DIGGING DEPTH
HP (KW) LBS. (KG) FT. (M)JS145 108 (81) 30,757 (13,951) 19.9 (6.0) 29 (8.8)
JS190 166 (123.8) 44,100 (20,003) 20.6 (6.3) 29.3 (8.9)
JS220LR 172(128.2) 51,000 (23,133) 39.4 (12.0) 51.2 (15.6)
JS220XD 172(128.2) 51,000 (23,133) 39.4 (12.0) 51.2 (15.6)
JS260 197 (147) 59,450 (26,966) 23.8 (7.2) 35.1 (10.7)
JS260LR 197 (147) 59,451 (26,966) 23.8 (7.2) 35.1 (10.7)
JS330 282 (210.2) 74,200 (33,656) 26.11 (7.9) 38.6 (11.8)
JS330XD 282 (210.2) 74,200 (33,656) 26.11 (7.9) 38.6 (11.8)
JS360 282 (210.2) 84,500 (38,328) 26.6 (8.1) 38.6 (11.8)
JZ235 172(128.2) 51,000 (23,133) 21.7 (6.6) 32.5 (9.9)
JCBMODEL ENGINE OPERATING WEIGHT DIGGING DEPTH DIGGING REACH
HP (KW) LBS. (KG) FT. (M) FT. (M)
PC09-18.7 (6.5) 1,985 (900) 4.9 (1.5) 9.9 (2.76)
PC18MR-315 (11.2) 4,090 (1,855) 7 (2.16) 12.9 (3.94)
PC27MR-325.7 (19.2) 6,460 (2,930) 9.3 (2.84) 15.8 (4.84)
PC78US-855 (41) 16,240 (7,365) 15.4 (4.71) 22.3 (6.79)
PC88MR-865 (49) 18,558 (8,420) 15.2 (4.62) 23.4 (7.15)
PC130-892 (68) 27,700 (12,560) 18 (5.52) 26.8 (8.17)
PC138USLC-1093.5 (68.8) 32,628 (14,800) 18 (5.45) 26.8 (8.18)
PC160LC-8115 (86) 37,740 (17,120) 19.5 (5.96) 28.8 (8.80)
HB215LC-1 (Hybrid)139 (104) 48,175 (21,850) 21.8 (6.62) 31.8 (9.7)
PC210LC-10158 (118) 52,036 (23,603) 21.8 (6.62) 31.8 (9.7)
PC240LC-10177 (132) 55,129 (25,006) 22.7 (6.92) 32.8 (10.02)
PC240LC-10 Super Long Front 177 (132) 58,521 (26,545) 44 (13.41) 54.4 (16.60)
PC360LC-10257 (192) 79,930 (36,255) 24.3 (7.38) 35.8 (10.92)
PC490LC-10 Var. Gauge359 (268) 109,250 (49,555) 25.4 (7.75) 38.8 (11.81)
PC490LC-10 Var. Gauge SLF359 (268) 115,109 (52,213) 46.2 (14.07) 64.8 (19.76)
PC650LC-8429 (320) 143,411 (65,050) 27.8 (8.49) 42 (12.80)
PC800LC-8487 (363) 188,670 (84,180) 28.3 (8.61) 44.2 (13.46)
PC800LC-8 Super Digger487 (363) 188,670 (84,180) 28.3 (8.60) 44.2 (13.46)
PC1250-8672 (502) 239,880 (108,810) 30.7 (9.35) 49.3 (15.0)
PC3000 Backhoe1260 (940) 564,500 (256,000) 25.9 (7.9) 53.2 (16.20)
PC4000 Front Shovel1875 (1400) 850,000 (385,000) 9.2 (2.8) 49.9 (15.2)
PC8000 Back Hoe 2 x 2010 (2 x 1500) 1565000 (709,872) 27.6 (8.4) 65.3 (19.9)
KOMATSUMODEL ENGINE OPERATING WEIGHT DIGGING DEPTH DIGGING REACH
HP (KW) LBS. (KG) FT. (M) FT. (M)
17D 14.8 (11) 4,173 (1,893) 7.1 (2.17) 12.10 (3.90)
35D 28.6 (21.3) 7,760 (3,520) 10.0 (3.05) 17.1 (5.21)
60D 54 (40.5) 13,653 (6,193) 12.4 (3.77) 20.5 (6.23)
85D 54 (40.5) 18,821 (8,537) 13.0 (3.97) 23.8 (7.21)
135G 97 (72) 30,617 (13,900) 19.7 (5.98) 27.6 (8.38)
190D W 159 (119) 43,211-44,026 (19,600-19,969) 19.2 (5.85) 31.4 (9.57)
210G LC 159 (119) 50,463 (22,910) 21.11 (6.68) 30.11 (9.43)
245G LC 159 (119) 56,167 (25,500) 21.9 (6.62) 32.6 (9.90)
290G LC 188 (140) 66,338 (30,090)25.8 (7.86) 37.0 (11.27)
350G LC 271 (202) 76,557 (34,725)26.8 (8.16) 38.9 (11.85)
870G LC 532 (397) 193,255 (87,658)31.4 (9.57) 57.6 (17.55)
JOHN DEEREMODEL ENGINE OPERATING WEIGHT DIGGING DEPTH DIGGING REACH
HP (KW) LBS. (KG) FT. (M) FT. (M)
75 Spin-Ace Isuzu AU-4LE2X - 54 (40)17,461 (7,920) 14.92 (4.54) 22.67 (6.90)
145 X3 Spin-Ace Isuzu AM-4JJ1X - 100 (75)31,747 (14,400) 19.75 (6.01) 28.67 (8.74)
160 X3 Isuzu AM-4JJ1X - 124 (92)37,919 (17,200) 21.33 (6.49) 30.75 (9.38)
235 X3 Spin-Ace Isuzu AM-4HK1X - 160 (119) 55,997 (25,400) 21.83 (6.65) 32.33 (9.85)
250 X3 Isuzu AL-4HK1X - 177 (132)55,336 (25,100) 24.33 (7.42) 35.42 (10.79)
250 X3LF Isuzu AL-4HK1X - 177 (132)61,950 (28,100) 47.75 (14.56) 60.08 (18.32)
470 X3 Isuzu AL-6UZ1X - 329 (245)108,467 (49,200) 30.17 (9.20) 44.00 (13.40)
800 X2 Isuzu AH-6WG1XYSS - 495 (369) 178,574 (81,000) 34.92 (10.66) 52.83 (16.11)
LBX COMPANYMODEL ENGINE OPERATING WEIGHT DIGGING DEPTH DIGGING REACH
HP (KW) LBS. (KG) FT. (M) FT. (M)
A904C Litronic 143 (105) 41,200-46,500 (18,688-21,092) 21.8 (6.6) 31.8 ( 9.7)
A914C Litronic 163 (120) 44,100-50,500 (20,003-22,906) 21.2 (6.5) 33 (10.1)
R900C Litronic 129 (95) 44, 100 -47,620 (20,000- 21,600) 20.8 (6.3) 30.1 (9.2)
R926 175 (129) 59,305-61,950 (25,700-28,950) 23.2 (7) 33.8 (10.3)
R924C Compact Swing 163 (120) 55,445-64,043 (12,223- 14,119) 22.6 (6.9) 31.1 (9.5)
R956 326 (240) 109,349-125,884 (49,600-57,100) 26.11 (8.3) 41 (12.5)
R974C Litronic 544 (400) 189,600-205,470 (86,001- 93,200) 35.7 (10.9) 50.1 (15.3)
LIEBHERRMODEL ENGINE OPERATING WEIGHT DIGGING DEPTH DIGGING REACH
HP (KW) LBS. (KG) FT. (M) FT. (M)
ECR145D 114 (84) 33,430 (15,163) 18 (5.51) 26.9 (8.20)
EC160D 139 (103) 38,320 (17,381) 19.8 (6.04) 28.9 (8.81)
EC220D 172 (127) 48,800 (22,135) 22 (6.73) 32 (9.77)
ECR235D 174 (128) 54,350 (24,652) 22 (6.7) 31.9 (9.72)
ECR305C 192 (142) 76,930 (34,894) 22.8 (6.95) 34.3 (10.43)
EC340D 279 (206) 77,240 (35,354) 26.7 (8.12) 38.3 (11.68)
EC700C 424 (312) 154,350 (70,119) 27.6 (8.40) 42.3 (12.90)
EW210D 169 (126)43,430 (19,699) - 50,265 (22,799)20.3 (6.17)
31 (9.44)
VOLVOMODEL ENGINE OPERATING WEIGHT DIGGING DEPTH DIGGING REACH
HP (KW) LBS. (KG) FT. (M) FT. (M)
Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 16, 2013 • Page 55
www.rdousedequipment.com
www.rdousedequipment.com62 Locations in 9 States - HQ in Fargo, ND
Daily Inventory Updates: www.rdousedequipment.com
Bob Schmidt • [email protected] (TX)
Jeff Hawks • [email protected] (MN/MT/ND/SD)
Sam Leeper • [email protected] (AZ/CA)
Paul Sears • [email protected] (Int’l)
Follow us on
RDOUsed_Constr
2006 JOHN DEERE 400D, AC, 6X6, 10100 Hrs ..................................................................................$130,0002007 JOHN DEERE 400D, AC, 6X6, 6140 Hrs ....................................................................................$190,000
(5) JOHN DEERE 310SG, Cab/AC, 4x4, Ext Stick ......................................................................................CALL2008 JOHN DEERE 310SJ, 4178 Hrs ....................................................................................................$45,0002012 JOHN DEERE 310SJ, 160 Hrs ......................................................................................................$80,0002002 CAT 430D, 2 Hrs ..........................................................................................................................$50,0002004 JOHN DEERE 710G, AC, EXT STK, 4382 Hrs ..............................................................................$60,2002005 TECO 760B, 6603 Hrs ..................................................................................................................$20,000
2008 JOHN DEERE 1050J, 335HP, 3368 Hrs ......................................................................................$380,0002005 JOHN DEERE 450J, 2919 Hrs ......................................................................................................$34,000(6) JOHN DEERE 700J, Cab/AC, call for options ........................................................................................CALL2007 JOHN DEERE 750J, 130-190 HP, 5414 Hrs................................................................................$133,000(10) JOHN DEERE 850J, Cab/AC, call for options ......................................................................................CALL1992 CAT D5C, 6099 Hrs ......................................................................................................................$30,0002005 KOMATSU D65PX-15, 190 HP, 6991 Hrs ....................................................................................$85,0002007 CAT D6R, cab a/c xl s-u blade ripper sweeps, 8242 Hrs ............................................................$180,0002006 CAT D9T, 190 HP, 10583 Hrs......................................................................................................$392,000
2007 JOHN DEERE 17D, (< 6 MT), 2397 Hrs........................................................................................$19,0002007 JOHN DEERE 200CLC, (6-50MT), 4649 Hrs ..............................................................................$107,0002011 JOHN DEERE 200DLC, AC, 9'7" ARM, 54" BKT, HYD THMB, 32" PDS, 1645 Hrs ......................$185,0002007 LINKBELT 210 X-2, (6-50MT), 5533 Hrs......................................................................................$70,0002006 HITACHI 225CLC, 2905 Hrs........................................................................................................$109,7002007 HITACHI 240DLC, ZX240LCS3 EXCAVATOR BASE, 5754 Hrs ....................................................$130,000(6) JOHN DEERE 270D, 270D, Call for options ..........................................................................................CALL(3 JOHN DEERE 27D, Call for options........................................................................................................CALL2001 CAT 345BL II, (6-50MT), 12228 Hrs ............................................................................................$68,000(3) JOHN DEERE 350DLC, Call for options ................................................................................................CALL2005 JOHN DEERE 35D, (< 6 MT), 5288 Hrs........................................................................................$13,0002006 JOHN DEERE 35D, (< 6 MT), 1763 Hrs........................................................................................$27,500(5) JOHN DEERE 450DLC ..........................................................................................................................CALL2007 JOHN DEERE 450DLC, PT HYD WARR TILL 7/14/2012 HAS CWRD, 6458 Hrs ........................$187,6002002 KOMATSU PC200LC-7, (6-50MT), 8355 Hrs................................................................................$65,0002000 KOMATSU PC220LC-6LE, (6-50MT), 9609 Hrs............................................................................$38,0002006 KOMATSU PC228USLC-3, 1608 Hrs ..........................................................................................$125,0002002 KOBELCO SK250LC, (6-50MT), 5877 Hrs ....................................................................................$60,0002004 KOBELCO SK70SR-1E, 5316 Hrs ................................................................................................$37,000(4) 2006-2011 HITACHI ZX200LC, Call for options....................................................................................CALL
2008 JOHN DEERE 755D, 982 Hrs......................................................................................................$195,0002005 CAT 973C, 12235 Hrs ..................................................................................................................$56,0002008 CAT 939C, ROPS NEW REBUILT ENGINE, 1690 HRS,1690 Hrs ..................................................$44,000
2003 JOHN DEERE 210LE, 2566 Hrs ....................................................................................................$21,000
1989 TROJAN 2000Z, 4WD, 142600 Hrs ..............................................................................................$15,0001977 FIAT ALLIS 345B, 10000 Hrs ......................................................................................................$15,0002005 KOMATSU 380-5L, 4WD, 12062 Hrs............................................................................................$62,0002008 CASE 521E, 4WD, 4533 Hrs ........................................................................................................$80,0002004 JOHN DEERE 544J, CAB W/AIR, RC, 7263 Hrs............................................................................$84,000(6) JOHN DEERE 624J, call for options......................................................................................................CALL(15) JOHN DEERE 624K, AC, Hi-Lift, QC....................................................................................................CALL2010 JOHN DEERE 624K, 4WD, 5366 Hrs ..........................................................................................$120,000(4) JOHN DEERE 644K, Call for options ....................................................................................................CALL1972 FIAT ALLIS 645B, 4WD, 1567 Hrs ..............................................................................................$14,0002006 JOHN DEERE 744J, 4WD, 5247 Hrs ..........................................................................................$180,000(3) JOHN DEERE 844J, Call for Options ....................................................................................................CALL2008 CAT 930H, 4WD, 7328 Hrs ........................................................................................................$105,0001996 CAT 950F, 4WD, 13795 Hrs..........................................................................................................$52,0002005 CAT 962G, 4WD, 13134 Hrs ........................................................................................................$82,0001972 CAT 980B, 4WD, 1 Hrs ................................................................................................................$22,0002006 DAEWOO MEGA 250-V, 4WD, 4193 Hrs ......................................................................................$60,0002008 KOMATSU WA200-6, 4WD, 3697 Hrs ........................................................................................$100,000
1989 CAT 140G, 8650 Hrs ....................................................................................................................$71,0002007 CAT 140H, 5712 Hrs ..................................................................................................................$170,0002007 CAT 140H, 7151 Hrs ..................................................................................................................$180,0002001 CAT 140H, 11758 Hrs ................................................................................................................$110,0002006 CAT 140H, 10686 Hrs ................................................................................................................$150,0002005 CAT 160H, 8736 Hrs ..................................................................................................................$145,0001999 CAT 160H, 7153 Hrs ..................................................................................................................$110,0001992 JOHN DEERE 770BH, 3504 Hrs....................................................................................................$45,0001990 JOHN DEERE 770BH, 1748 Hrs....................................................................................................$50,0002003 JOHN DEERE 770CH, 8855 Hrs....................................................................................................$86,0002009 JOHN DEERE 770G, cab a/c auto shift 14' bld 17.5t push block ripper, 2736 Hrs ....................$215,0002009 JOHN DEERE 772GP, CAB, AC, LOW, 17.5R25, 14', RPPR, PB ,487 Hrs ..................................$356,082(5) JOHN DEERE 870D ..............................................................................................................................CALL(3) JOHN DEERE 872D, 1946 Hrs ..............................................................................................................CALL2006 JOHN DEERE 872D, 5195 Hrs....................................................................................................$180,0002001 VOLVO G730VHP, 6761 Hrs ........................................................................................................$80,000
2008 JOHN DEERE 9630, 4WD WHEEL CE, 5098 Hrs ........................................................................$180,000
ARTICULATED TRUCKS
BACKHOE LOADERS
CRAWLER DOZERS
EXCAVATORS
LANDSCAPE LOADER
WHEEL LOADERS
MOTOR GRADERS
SCRAPER TRACTOR
CRAWLER LOADERS
VISITwww.rdousedequipment.com
• Faster Search
• Expanded Inventory
• Larger Photos
CAT D9T $392,000 CAT 345BL $68,000 JD 624K (1 of 15) JD 710G $60,000
Page 56 • February 16, 2013 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide
Powerful: Heavy-duty 70 HP direct injection diesel engineResponsive: Innovative Float Angle Blade for easier ground finishingVersatile: Dual auxiliary hydraulic ports allow simultaneous operation of a wide range of attachments
Construction Equipment from the Ground Up.
www.kubota.com©Kubota Tractor Corporation, 2008
2216 N. Green Bay Rd.Waukegan, IL 60087
847/336-1205Fax 847/336-2697
27939 W. Concrete Dr.Ingleside, IL 60041
815/363-4100Fax 815/363-4109
2001 Cherry Hill Rd.Joliet, IL 60433815/464-6650
Fax 815/464-6951
Burris Equipment Co.Anoka, MN
888/448-5266753/323-1720Shakopee, MN877/753-6100952/445-6310
Corcoran, MN888/479-4342763/479-8200
Lano Equipment, Inc.1801 E. University Ave.
Urbana, IL 61802800/798-1772
Fax: 217/337-1775
2900 E. Jackson St.Macomb, IL 61455
888/360-9225
200 North St.Prophetstown, IL 61277
877/221-0881
Birkey’s Construction Equipment124 N. Schmale Rd.
Carol Stream, IL 60188630/510-6050
Fax 630/510-6051
1305 Sentry DriveWaukesha, WI 53186
262/521-5802Fax 262/521-5801
1st Choice Equipment LLC
Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 16, 2013 • Page 57
TAKE COMMAND OF MORE GROUND FORCES.
Battling tight deadlines and risingcosts? Arm yourself with a 350GLC Excavator. With more armand dig force, it delivers up toeight-percent more productivity.So you can move more yards pergallon — and get on with thenext job. Its rugged EPA InterimTier 4/EU Stage IIIB PowerTech™diesel enables you to work,wherever the work, even innonattainment areas. These,plus numerous other customer-inspired refinements — includ-ing an even more spacious caband an enhanced multifunctionLCD monitor with simplifiednavigation — help your operatormake the most of the day.
Saginaw4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989/777-0090
Fax: 989/777-1583
Grand Rapids600 44th Street S.W.
Grand Rapids, MI 49548616/538-2400
Fax: 616/538-0449
Northeast Detroit65809 Gratiot AveLenox, MI 48050
586/727-7502Fax: 586/727-7311
West Detroit56555 Pontiac Trail
New Hudson, MI 48165 248/437-8121
1-800/457-8121
Traverse City8300 M-72 East
Williamsburg, MI 49690231/267-5060
Fax: 231/267-5257
Naperville, IL 60563630/355-7150
Fax: 630/355-7173
Rockdale, IL 60436815/730-9011
1-800/937-3355Fax: 815/730-9036
Rockford, IL 60012815/961-3160
Fax: 815/965-1810
South Holland, IL 60473708/331-6362
Fax: 708/331-7334
Wauconda, IL 60084847/526-7700
Fax: 847/526-3565
Bloomington, IN 47403812/333-9677
Fax: 812/333-9731
Fort Wayne, IN 46825260/482-8576
Fax: 260/483-4057
Indianapolis, IN 46219317/544-3411
Fax: 317/544-3420
Lafayette, IN 47905765/447-6933
Fax: 765/448-9038
South Bend, IN 46619574/232-1461
Fax: 574/233-3324
Des Moines, IA800/822-2212
Fort Dodge, IA800/362-2487
Sioux City, IA800/352-4693
Waterloo, IA800/772-2019
Dodge City, KS800/794-0172
Great Bend, KS800/264-4056
Park City, KS800/262-0139
Topeka, KS800/279-6087
Ulysses, KS800/472-9238
Kansas City, MO888/306-3434
Springfield, MO888/306-2656
Gering, NE800/205-6784
Grand Island, NE800/868-4017
Lincoln, NE800/416-5518
North Platte, NE800/894-7060
Omaha, NE800/416-5095
Brunswick, OH800/716-9796
Cambridge, OH 740/439-2747
Canton, OH866/235-0438
Chillicothe, OH 740/663-5300
Cincinnati, OH800/844-3734
Columbus, OH800/222-2010
Lima, OH800/423-7445
Painesville, OH866/800-1398
Poland (Youngstown), OH866/503-7259
Vandalia (Dayton), OH800/233-4228
Cranberry Twp, PA724/776-3636
Delmont, PA724/837-4500
www.westsidetractorsales.com www.murphytractor.com
Page 58 • February 16, 2013 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide
JB Attachments Limited, a New Zealand-based innovatorof earthmoving attachments, and Woods EquipmentCompany, a North American leader in the design and manu-facturing of construction and agricultural attachments andimplements, announced the formation of a strategic partner-ship Jan. 16.Under the terms of the agreement, Woods will market and
distribute JBA’s variable center coupler through its U.S. andCanadian dealer network. The product line fits machineclasses from 2.2 to 50 tons (2 to 45 t) and will be co-brand-ed “Woods Variable Coupler by JB Attachments.”“JB is a pioneer in quick coupler systems,” said Jerry
Johnson, president of Woods products division. “Their inge-nuity and quality are perfectly aligned with the products wecurrently offer the construction market under our Wain-Roy,CF and Gannon brands.”According to Graham Smolenski, chairman of JB
Attachments, “It is an ideal partnership. Woods has the tech-nical expertise and an attitude to quality customer serviceand support that complements JBA’s endeavor to produceuser friendly, state of the art earth moving equipment. Ibelieve that the combination of these attributes will enablethe variable center coupler to achieve the same marketleader status in the U.S. as has been done in Australasia.”This new line of variable couplers available from Woods
fits 10 machine classes and is valued for the versatility of itsuniversal design. The coupler’s low profile and lightweightdesign increase breakout force while reducing fuel con-sumption, and with only two moving parts, maintenance andopportunities for failure are both reduced, according to themanufacturer. The product incorporates several safety features, is built to
ISO9001 standards, and tested to twice the capabilityrequirements. The complete line will be available in March,through Woods dealer network. For more information, call 800/848-3447 or visit
woodsequipment.com.
JB Attachments,Woods EquipmentForm Partnership
small step no. 34
TAKE A SMALL STEP TO GET HEALTHY
www.smallstep.gov
FETCH THIS PAPER YOURSELF
d Ref#: 211169
Link-Belt 210 X3 Series ExcavatorFeatures New ROPS Cab, Interior
The Link-Belt 210 X3 series exca-vator is now available in NorthAmerica in standard and long-frontmodels. The 210 X3 features an allnew ROPS cab with new interior, newInterim Tier IVa engine technologywith 10-percent better fuel efficiency,7-percent more lift capacity, 3-percentfaster cycle times and improved serv-iceability. Additionally, the 210 X3can be equipped with an optional aux-iliary hydraulic system, which allowsthe operator to change both pressureand flow settings from inside the cabwithout having to lift a wrench.The 210 X3 is equipped with an
advanced, electronically-controlledIsuzu diesel engine to deliverenhanced performance and power torespond to peak demands of heavydigging and lifting applications. Thisadvanced engine is EPA certified toInterim Tier IVa standards utilizingcooled exhaust gas recirculation(CEGR) and diesel particulate filtertechnology (DPF). A new variable-geometry turbocharger provides highvelocity air flow at lower rpm’s forclean, efficient combustion and powereven when performing precision tasksat slower speeds.The 210 X3 features an all new fuel
management system to squeeze everyounce of power from every drop of
fuel. This intelligent new fuel efficien-cy system controls consumption bylowering engine rpm during non-crit-ical functions. With a high-pressurecommon-rail fuel injection system,there’s no wasted fuel with precision,electronically-controlled metering. Incombination with additional enginecontrols such as auto-idle, theadvanced fuel management systemreduces fuel consumption by up to10-percent to lower overall owningand operating costs, according to themanufacturer.The X3 Series cab is 5-percent
larger and more expansive withenhanced visibility to the right with-out blocking the view to the travelmotors. With a large, 7-in. LED colormonitor to interface with themachine, an operator can easily navi-gate a full menu of user-friendly func-tionality to take full command of the210. An operator also will feel safer inthe ROPS-certified cab, especiallywith the standard rear-view camerawhich displays a panoramic view ofthe work site from the rear of themachine: optional side-view camerasalso are available.Other notable new cab features
include: a fuel consumption gauge onthe monitor to assist in determiningoperating characteristics; newly
designed joysticks with single-swipewiper function and radio mute but-tons; new MP3 audio input, improvedair-flow of climate control A/C andheat; repositioned fuse box for easyaccess. With 20 programmable lan-guages, display messages can be readby virtually anyone. And, all Link-Belt excavators are equipped with astandard control pattern changer. Refinements to the X3 Series
hydraulic system have resulted ingains in lift capacity and up to 3-per-cent faster cycle times. Many of thehydraulic features of generations’ pasthave been carried through to the newX3, including the smooth functionali-ty of the open-center design. To maximize uptime, the 210 X3
features an on-board diagnostic sys-tem with flashing diagnostic codes onthe monitor to quickly alert the oper-ator to potential trouble. New, pro-grammable, service intervalreminders for 13 different serviceitems can be tracked through themonitor to make planning mainte-nance easier. A new easy access cabfilter on the left hand side of the cabprovides ground level access whilehelping maintain cab pressure to keepthe interior clean.For more information, visit
www.lbxco.com.
The 210 X3 features an all new ROPS cab with newinterior, new Interim Tier IVa engine technology with10-percent better fuel efficiency, 7-percent more liftcapacity, 3-percent faster cycle times and improve
serviceability.
Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 16, 2013 • Page 59
Attachments can make your machine more valuable. Allied offers a wide assortment of attachments to fit all of your makes and models of excavator, loader/backhoe, mini-excavator, skid-steer or compact track loader machines. Allied has become attached to your machines. Allied’s construction and demolition attachments are productive and dependable. State-of-the-art technology. Full product line. Competitive price and performance.
Allied offers innovative, problem-solving capabilities. Commitment to product availability. Superior product support. Strong Distributor network. Most of all Allied meets and exceeds customer performance expectations. To put a high performance Allied attachment on your machine, call 1-800- 321-1046 or visit www.AlliedCP.com for the name of a Distributor nearest you. We’ve become attached to your machines.
© 2013 Allied Construction Products, LLC
Attachments can make your machine more valuable. Allied offers a wide assortment of attachments to fit all of your makes and models of excavator, loader/backhoe, mini-excavator, skid-steer or compact track loader machines. Allied has become attached to your machines. Allied’s construction and demolition attachments are productive and
Attachments can make your machine more valuable. Allied offers a wide assortment of attachments to fit all of your makes and models of excavator, loader/backhoe, mini-excavator, skid-steer or compact track loader machines. Allied has become attached to your machines. Allied’s construction and demolition attachments are productive and
Attachments can make your machine more valuable. Allied offers a wide assortment of attachments to fit all of your makes and models of excavator, loader/backhoe, mini-excavator, skid-steer or compact track loader machines. Allied has become attached to your machines. Allied’s construction and demolition attachments are productive and
Allied offers innovative, problem-solving capabilities. Commitment to
expectations. To put a high performance Allied attachment on your
Allied offers innovative, problem-solving capabilities. Commitment to product availability. Superior product support. Strong Distributor network. Most of all Allied meets and exceeds customer performance expectations. To put a high performance Allied attachment on your machine, call 1-800- 321-1046 or visit www.AlliedCP.com for the name
product availability. Superior product support. Strong Distributor network. Most of all Allied meets and exceeds customer performance expectations. To put a high performance Allied attachment on your machine, call 1-800- 321-1046 or visit www.AlliedCP.com for the name
olving capabilities. Commitment to
network. Most of all Allied meets and exceeds customer performance
o
Allied’s construction and demolition attachments are productive and dependable. State-of-the-art technology. Full product line. Competitive price and performance.
Allied’s construction and demolition attachments are productive and dependable. State-of-the-art technology. Full product line. Competitive price and performance.
Allied’s construction and demolition attachments are productive and dependable. State-of-the-art technology. Full product line. Competitive of a Distributor nearest you. We’ve become attached to your machines.
machine, call 1-800- 321-1046 or visit www.AlliedCP.com for the name of a Distributor nearest you. We’ve become attached to your machines.
©2013 LLCProducts, Construction Allied
machine, call 1-800- 321-1046 or visit www.AlliedCP.com for the name of a Distributor nearest you. We’ve become attached to your machines.
machine, call 1-800- 321-1046 or visit www.AlliedCP.com for the name of a Distributor nearest you. We’ve become attached to your machines.
Page 60 • February 16, 2013 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide
hitachiconstruction.com
A “jack-of-all-trades” is good at some things, but great at nothing. That’s why at
Hitachi, we stay on course specializing in excavators. By not getting sidetracked,
we make exactly what you want. Great, reliable excavators. THAT’S ALL.
N E V E R S I D E T R A C K E D .
WEST SIDE TRACTOR SALES CO.www.westsidetractorsales.com
AIS CONSTRUCTION EQUIPMENT CORPORATION
www.aisequip.com
RDO EQUIPMENT CO.www.rdoequipment.com
MURPHY TRACTOR & EQUIPMENT CO.www.murphytractor.com
1400 W. Ogden Ave.Napervile, IL 60563
630-355-7150Fax: 630-355-7173
310 W. 162nd St.South Holland, IL 60473
708-331-6362Fax: 708-331-7334
3110 Prairie Rd.Rockford, IL 61102
815-961-3160Fax: 815-965-1810
1560 N. Old Rand Rd.Wauconda, IL 60084
847-526-7700Fax: 847-526-3565
600 Walnut CourtRockdale, IL 60436
815-730-9011Fax: 815-730-9036
3600 North Grand RiverAvenue
Lansing, MI 48906517-321-8000
Fax: 517-321-6275
Grand Rapids600 44th Street S.W.
Grand Rapids, MI 49548616-538-2400
Fax: 616-538-0449
Northeast Detroit65809 Gratiot Avenue
Lenox, MI 48050586-727-7502
Fax: 586-727-7311
Saginaw4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722Phone 989-777-0090Fax: 989-777-1583
Traverse City8300 M-72 East
Williamsburg, MI 49690231-267-5060
Fax: 231-267-5257
West Detroit 56555 Pontiac Trail
New Hudson, MI 48165248-437-8121800-457-8121
12500 DuPont Ave. S.Burnsville, MN952-890-8880
1910 LorRay Dr.North Mankato. MN
506-387-1836
1236 60th Ave. N.W.Rochester, MN507-282-8888
6700 Highway 10 NWSauk Rapids, MN320-259-6222
Park City, KS800/262-0139
Dodge City, KS800/794-0172
Great Bend, KS800/264-4056
Topeka, KS800/279-6087
Ulysses, KS800/472-9238
Kansas City, MO888/306-3434
Springfield, MO888/306-2656
Gering, NE800/205-6784
North Platte, NE800/894-7060
Grand Island, NE800/868-4017
Lincoln, NE800/416-5518
Omaha, NE800/416-5095
Waterloo, IA800/772-2019
Des Moines, IA800/822-2212
Fort Dodge, IA800/362-2487
Sioux City, IA800/352-4693
Columbus, OH800/222-2010
Cincinnati, OH800/844-3734
Vandalia(Dayton), OH800/233-4228
Lima, OH800/423-7445
Canton, OH866/235-0438
Brunswick, OH800/716-9796
Painesville, OH866/800-1395
Poland(Youngstown),
OH724/837-4500
Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 16, 2013 • Page 61
Volvo Construction Equipment
28775 Beck Rd.Wixom, MI 48393248/449-6700
Muskegon, MI231/798-8754
Kentwood, MI616/698-2960
Battle Creek, MI269/965-1269
Romulus, MI734/641-8238
Saginaw, MI989/752-9400
Sterling Hts, MI586/977-6000
Zeeland, MI616/748-4108
Lansing, MI517/272-5033
Wixom, MI (Cons. Division)248/356-5200
Byron Center, MI616/878-7450
12500 S. Cicero Ave.Alsip, IL 60803708/389-7700
Villa Park, IL630/530-7600
Rockford, IL815/227-0555
East Peoria, IL309/694-4455
Springfield, IL217/789-0351
Evansville, IN812/867-6661
Fort Wayne, IN260/482-3681
Indianapolis, IN317/247-9125
Corbin, KY606/528-9440
Louisville, KY502/456-4050
Prestonsburg, KY606/874-2104
St. Louis, MO314/487-8925
McALLISTEREQUIPMENT CO.
MAXIMIZE EFFICIENCY. MINIMIZE COSTS.LET’S WORK.Volvo Construction Equipment offers equipment that’s ideal for quarry work. Our wheel loaders feature our exclusiveOptiShift technology for exceptional fuel efficiency, while our articulated haulers are designed for quick transport of aggregates.With the support of over 300 dealer locations across North America, the result is greater productivity for your crew – and ahigher earning potential for you.
Learn more about OptiShift by contacting a Volvo dealer near you. Visit volvoce.com/na today.
Page 62 • February 16, 2013 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide
Komatsu PC650LC-8 Driven by Advanced Design, ReliabilityThe Komatsu PC650LC-8, with a flywheel
horsepower of 429 hp (320 kW), is powered by aKomatsu SAA6D140E-5 engine. The electroni-cally controlled HPCR (high pressure commonrail) fuel injection system is EPA Tier III emis-sions certified, provides low noise operation andremains fuel efficient while delivering power andproductivity. The operating weight is 143,000lbs. (64,864 kg), which provides maximum sta-bility and comfort, allowing operators to maintainfast cycle times as well as high levels of produc-tivity, according to the manufacturer.The PC650LC-8 is equipped with KOM-
TRAX, which sends machine operating informa-tion to a secure Web site utilizing wireless tech-nology. Data such as operating hours, location,cautions and maintenance alerts are relayed to theweb application for analysis. The KOMTRAXfleet monitoring system increases machine avail-ability, reduces the risk of machine theft, allowsfor remote diagnosis by the distributor, and pro-vides a wealth of other information to drive busi-ness efficiency and productivity.Special features of the PC650LC-8 include:• Large Multi-Color MonitorThe easy-to-view 7 in. LCD monitor enables
accurate smooth work and displays data in 25 lan-guages for global support. There are three modesof operation that may be selected through themonitor panel: Power mode, economy mode, andlifting mode. The monitor panel also displays theautomatic air conditioner, machine maintenancetracking and the image from the standard, coun-terweight-mounted rearview camera system. • Enhanced Operating Efficiency Through
Easy Maintenance and ServiceabilityThe PC650LC-8 provides easy service and
maintenance access in order to reduce costlydowntime. The machine is equipped with theexclusive Komatsu EMMS (equipment manage-ment monitoring system), which performs threemain functions that are displayed on the largeLCD color monitor. EMMS continually monitorsall critical excavator systems, alerting and guidingthe operator should an abnormality occur.EMMS often prevents a small problem frombecoming a major service issue, contributing to reducedoperation costs. The system tracks the preventative mainte-nance schedule, provides on-board tracking, and advises cur-rent required maintenance. EMMS also provides error codesand troubleshooting assistance to mechanics in order to min-imize diagnosis and repair time.• Built for Durability And ReliabilityAll major components on the PC650LC-8 including the
engine, hydraulic pumps, motors, and control valves areexclusively designed and produced by Komatsu. The boomand arms exhibit long-term durability and are highly resist-ant to bending and torsional stress due to large cross-sec-tional structures, thick high tensile strength steel, interior par-tition walls, and large one piece castings. Komatsu framesare designed using the most advanced three-dimensionalCAD and FEM analysis technology, according to the manu-facturer. Electronic components such as controllers, connectors,
sensors and wiring have undergone extensive testing to
ensure reliability in the harshest conditions. The electronicconnectors are DT-type and seal against dirt and moisture.All hydraulic cylinders are protected by metal guard rings foradditional reliability. Hydraulic hoses are equipped with O-ring seals versus conventional taper seals to provide extend-ed leak-free life. The standard high pressure in-line filters atthe pump outlet port provide an extra level of protection tothe hydraulic system. Long replacement intervals forhydraulic oil, engine oil, and filters keep the machine up andrunning for increased hours on the job. • Versatility to Match Different Job ApplicationsThe PC650LC-8 comes equipped with two boom mode
settings, three working modes, and Power Max control.These modes are designed to match engine speed, pumpflow, and system pressure to specific application require-ments, providing the operator with the flexibility to matchequipment performance to the job at hand. In hard diggingapplications, a one-touch Power Max Function increasesdigging force by 7 percent for 8 seconds.
• Cab Enhancements Provide Comfortable WorkingEnvironmentA wide spacious cab with a high back operator seat pro-
vides support and comfort for reduced fatigue and higherproductivity. The multi-position, PPC (pressure proportion-al control) levers and armrest integrated with the consolelevers allow the operator to work in comfort while maintain-ing precise control. The highly pressurized cab keeps dust from entering the
operator’s compartment, while its rigid frame offers widevisibility and has excellent sound absorption. The multi-layer viscous cab mounting system incorporates longerstroke and the addition of a spring. Combined with a highrigidity deck, the new cab damper mounting reduces noiseand vibration levels at the operator seat. A high capacityautomatic heater/defroster/air conditioning system is incor-porated into the new monitor panel and is provided as stan-dard equipment.For more information, visit www.komatsuamerica.com.
The Komatsu PC650LC-8, with a flywheel horsepower of 429 hp (320 kW), is powered by a Komatsu SAA6D140E-5 engine.The operating weight is 143,000 lbs. (64,864 kg).
Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 16, 2013 • Page 63
Page 64 • February 16, 2013 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide
Buck & KnobbyEquipment Co.6220 Sterns Rd
Ottawa Lake, MI 49267734-856-2811
Vermeer Midwest2801 Beverly Dr.Aurora, IL 60502630-820-3030
PO Box 224Eureka, IL 61530309-467-3716
1801 179th Ave.Moline, IL 61244309-751-9540
13402 Britton Park Rd.Fishers, IN 46038317-842-1040
3566 Citadel CircleNewburgh, IN 47630
812-490-4400
3310 West Coliseum Blvd.Fort Wayne, IN 46808
260-484-2494
PO Box 27317550 Chesterfield Airport Rd.
Chesterfield, MO 63006636-532-2332
1005 Thorez Rd.Jackson, MI 49201517-750-3783
1196 A Franklin St.Marne, MI 49435616-677-5900
Vermeer of IowaPO Box 168-661 Hwy T14
Pella, IA 50219641-628-2000
Vermeer Siouxland4858 D Ave.
Marcus, IA 51035712-376-2310
Vermeer of Eastern Iowa101 Commerce Blvd.Tipton, IA 50219563-886-2444
Custom Truck & Equipment7701 Highway 24
Kansas City, MO 64125800-861-1065
www.cte-equipment.com Paint Valley Equipment10550 Twp Rd. 262
Millersburg, OH 44654877-774-0081330-674-4031
Roeder Implement Inc.2550 Rockdale Rd.Dubuque, IA 52003563-557-1184
Fax: 563-583-1821
Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 16, 2013 • Page 65
Page 66 • February 16, 2013 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide
No one is good at going through foreclosure. Thankfully, there’s a way for you to get free, trusted advice. Call the Hope Hotline today and speak to a HUD approved counseling agency.
GET CLEAR ON FORECLOSURE OPTIONS.
CALL 1-888-995-HOPE.
FROECLUSRE MAEKS EEVRYHTIGN COFNUISNG.
McCann Industries543 S. Rohlwing Rd • Addison, IL 60101
630-627-0000250 E. North Frontage Rd. • Bolingbrook, IL 60440
630-739-77702350 S. Laflin St. • Chicago, IL 60608
312-942-92004701 West 137th Street • Crestwood, IL 60445
708-597-31101133 Indianapolis Blvd. • Schererville, IN 46375
219-865-65451360 N. Rand Rd. • Wauconda, IL 60084
847-526-94444102 W. Crystal Lake Rd. • McHenry, IL 60050
815-385-0420www.McCannOnline.com
Road Machinery & Supplies Co.5633 W. Highway 13 • Savage, MN 55378
952-895-9595 • 800-888-9515314 Garfield Ave. • Duluth, MN 55802
218-727-8611 • 800-888-9535315 North Hoover Rd. • Virginia, MN 55792
218-741-9011 • 800-752-430475 US Hwy 41 • Neguanee, MI 49866
906-475-6488606 W. 10th Ave. • Milan, IL 61264309-787-1742 • 800-633-9114
RMS Rentals12520 Quenton Ave. So., Ste 100
Savage, MN 55378952-895-9595 • 800-888-9515
www.rmsequipment.com
Kelbe Brothers Equipment Co., Inc.12770 W. Silver Spring Drive • Butler, WI 53007
262-373-2151Fax: 262-373-2102
4621 Dutch Mill Rd. • Madison, WI 53716608-221-8300
Fax: 608-221-0610www.kelbebros.com
Alta Equipment Company28775 Beck Rd. • Wixom, MI 48393
248-449-67002470 W. Columbia Ave. • Battle Creek, MI 49015
269-965-12698840 Byron Commerce SW • Byron Center, MI 49315
616-878-74504716 Talon Ct. S.E. • Kentwood, MI 49512
616-698-29606327 Jomar Ct. • Lansing, MI 48917
517-272-50335920 Grand Haven Rd. • Muskegon, MI 49441
231-798-875428855 Smith Rd. • Romulus, MI 48174
734-641-82381524 Champagne Dr. • Saginaw, MI 48604
989-752-94007500 E. 15 Mile Rd. • Sterling Hts., MI 48312
586-977-600028990 Wixom Rd. • Wixom, MI 48393
248-356-52009433 Riley St. • Zeeland, MI 49464
616-748-4108www.altaequipment.com
Victor L. Phillips Co.4100 Gardner Ave. • Kansas City, MO 64120
800-878-92905430 S. Highway 43 • Joplin, MO 64804
800-878-82236330 W. Hwy 60 • Brookline Station, MO 65619
800-955-27293250 North Hydraulic • Wichita, KS 67219
800-878-33461304 SW 42 St. • Topeka, KS 66609
800-878-43452203 West Jones Ave. • Garden City, KS 67846
800-511-1435www.vlpco.com
Bobcat of St. Louis401 West Outer Rd. • Valley Park, MO 63088
636-225-2900Fax: 636-225-4344
O’Fallen, MO636-240-9020Columbia, MO573-886-9435
Fairview Heights, IL618-397-1847
www.bobcatofstl.com
Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 16, 2013 • Page 67
Luby Equipment Services2300 Cassens Drive • Fenton, MO 63026
636-343-9970199 Airport Road • Cape Girardeau, MO 63702
573-334-99378853 Petrov Drive • Caseyville, IL 62232
618-397-99714375 Camp Butler Road • Springfield, IL 62707
217-744-22332625 North 24th St. • Quincy, IL 62305
217-222-5454www.lubyequipment.com
Indy Equipment6500 Schaff Rd. • Independence, OH 44131
216-446-3200 • Fax: 216-573-771211159 Royalton Rd. • N. Royalton, OH 44133
440-237-904035350 Chester Rd. • Avon, OH 44011
440-832-7133www.indyequipment.com
Midwest Underground Supply1106 32nd St. SW • Bondurant, IA 50035
877-967-56568844 S. 135th St. • Omaha, NE 68138
888-407-650027285 Ironworks Rd. • Harrisburg, SD 57032
605-368-9880
Star Equipment Ltd.1401 2nd Avenue • Des Moines, IA 50314
515-283-2215 • 800-369-2215Fax 515-283-0295
2625 W. Airline Hwy. • Waterloo, IA 50703319-236-6830 • 800-791-9249
Fax 319-236-68342950 6th Street SW • Cedar Rapids, IA 52404
319-365-5139 • 800-728-5139Fax 319-365-6726
2100 E. Lincoln Way • Ames, IA 50010515-233-9500 • 866-856-2312
Fax: 515-233-9505
Page 68 • February 16, 2013 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide
N
Black
F
6-21-2012 4:34 PM
F
THERE’S A LITTLESMOKEY IN ALL OF US.9 out of 10 wildfires are caused by humans. Which means 9 out of 10 wildfires can be prevented. So if you see someone acting irresponsibly, step in and make a difference.
SmokeyBear.com
photo Jill Greenberg©USDA Forest Service
WHATEVER IT TAKES TO GET THE JOB DONE RIGHT
MAGNETS H GRAPPLES H SCRAP SHEARS H CLAMSHELL BUCKETSCONCRETE DEMOLITION H ROCK + LOG GRABS H DYNASET ACCESSORIES
GENSCO AMERICA, INC.ACROSS USA 800-268-6797 • 5307 Dividend Dr., Decatur, Georgia 30035 • 770-808-8711 • Fax: 770-808-8739
GENSCO EQUIPMENT (1990) Inc.53 Carlaw Ave., Toronto, Canada M4M 2R6 • 416-465-7521 • Fax: 416-465-4489 • email: [email protected] • www.genscoequip.com
Magnets
Handling and
Crushing
Grapples
Concrete
Demolition
Dynaset
Hydraulic
Accessories
Scrap Shears
Clamshell Buckets
Screening Plant that Fits
All Excavators
SEE VIDEO atwww.demo-recycle.com
(603) 499-3957For More Information: [email protected]
Great for PipelineTrench & SepticWork
Made in USA
Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 16, 2013 • Page 69
YOU DON’T HAVE TO DIG REAL DEEP......TO DIG REAL DEEP
You don’t have to have real deep pockets to invest in a LiuGong. LiuGong hydraulic excavators are
designed and built to compete value-wise, both in the showroom and out on your next job.
With lower ownership and operating costs, you’ll be able to break out of your costly earthmoving routine and make some money with a LiuGong.
From a mini-excavator for your next landscaping job to a full-sized machine for
some major pipeline chores, check one out at your LiuGong dealer today.
LiuGongNA.com281-579-8882
Illinois Steve’s Equipment Services Chicago 630-231-4840
Indiana Job Rentals & Sales Je� ersonville 812-282-2800
Steve’s Equipment Services Gary 219-949-9595
South Dakota Midwest Loader Sales Vermillion 605-638-0897
LiuGong is a � fty-plus-year-old construction equipment manufacturer with a huge range of products for the North American quarry, construction, recycling, timber, landscaping, utility and other markets – WHEEL LOADERS. HYDRAULIC EXCAVATORS. BACKHOE-LOADERS. SKID-STEER LOADERS. SOIL COMPACTORS. LiuGong is the only equipment manufacturer to receive the coveted National Quality Award of China and are ISO9001 and ISO14001 certi� ed. Truly a top-shelf, world-class organization.
SELECT TERRITORIES AVAILABLE
VISIT YOUR AUTHORIZED LIUGONG DEALER TODAY
OPERATING WEIGHTS TO 81,600 POUNDS BUCKET CAPACITIES TO 2.5 CUBIC YARDS DIGGING FORCES UP TO 48,559 POUNDS
YANMAR & CUMMINS ENGINES UP TO 260 HORSEPOWER DIESEL ENGINES
DUMPING HEIGHTS TO 24’4” DIGGING DEPTHS TO 24’1”
Page 70 • February 16, 2013 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide
Volvo’s D-Series Excavators FeatureLatest Engines, Enhanced HydraulicsVolvo created a new range of
excavators that bridge the weightclasses of 14 and 28 tons (12.7 and25.4 t) and feature the latest fuel-efficient Volvo engines andenhanced hydraulics. Offering greater digging forces
and faster cycle times, themachines that make up the Volvomiddleweight excavator rangeoffer high-quality performanceand boast fuel efficiency improve-ments of up to 14 percent, accord-ing to the manufacturer. Spanning the weight classes
between 14 and 28 tons, theEC140D, EC160D and EC220Dalso offer enhanced lifting capacityand stability, allowing heavier objectsto be lifted. Fitted with the latest VolvoD4 engine (EC140D, EC160D) andVolvo D6 (EC220D) Tier IV interimemissions-compliant engines, theseunits also are more fuel efficient — upto 14 percent. Couple these efficientengines with well-matched compo-nents and a smart hydraulic system andthe operator can enjoy smooth andhighly responsive combined operationand travel, due to prioritizing oil flowaccording to requirements, accordingto the manufacturer. Featuring greased and sealed track
chains as standard, each track is pow-ered by an automatic two-speed shifttravel motor, maximizing tractiveforce. The track brakes are multi-disc,and travel motor, brake and planetarygears are all well protected within thetrack frame. The superstructure features a host of
anti-slip plates, steps and handrails —allowing safe access to the machine. Anew rear access located behind the cabof the EC140D and EC160D modelsbrings the main hydraulic componentsand engine within easy reach.
Running on All Volvo Cylinders
All machines are fitted with the lat-est Volvo D4 and D6 diesel engines,delivering enhanced performance andfuel efficiency — attributes maximizedwhen combined with new Volvohydraulics and well-matched compo-nents. The engines use precise, highpressure fuel injectors, turbo charging,intercooling and advanced electronicsto optimize engine performance.Maximum net power is 113 hp (84
kW) for the EC140D and goes up to172 hp (128 kW) for the EC220D.When compared to the previous C-Series excavators, this represents anaverage increase in gross engine powerof up to 7 percent across the modelrange. Operators can select the best work
mode for the task at hand, ensuringoptimum performance and fuel effi-ciency. Modes include I-idle, F-fine, G-general or H-heavy with the machineautomatically setting the appropriateengine speed for the work mode. Ecomode is a new feature that works in Hor G mode and provides better fuel effi-ciency without loss of performance inmost operating conditions.Pump flow is controlled for com-
bined digging and swinging operationsto reduce the flow loss through theoverload relief valves, while maintain-ing digging power and maximumswing torque.
Power Is Nothing WithoutControl
The new “smart” hydraulics systemis designed for high productivity, highdigging capacity, easy maneuverabilityand fuel economy. It features improve-ments that increase total flow andimprove cycle times up to 2.5 percent.An attachment management systemcan store up to 18 pre-sets and enableshydraulic flow to adjust to meet therequirements of the attachment in use.
Room With a (Great) ViewThe operator’s cab has easy access
via a wide opening door and offersoperators visibility, due to large glasswindows and thin pillars. A rear viewcamera also improves visibility and
safety by allowing the operator tocheck blind spots around the worksite. The cab also is quieter being
roll over protective structure(ROPS) protected and mountedon viscous silicon rubber mountsthat iron out vibrations. Ideallyplaced high quality controls andmonitors, ample storage and legroom make the equipment cab amore comfortable and spaciousplace for operators to spend theirworkday. A large color monitorprovides good clarity in all lightconditions. An advanced automatic climate
control and defrosting system fea-tures 14 vents to allow operators towork comfortably. The machine joy-stick control and operator seat moveindependently — with the seat havingnine adjustment options.
Support You Can Rely OnEach of these mid-sized Volvo
excavators feature easy maintenancepoints. Accessed via wide-openingcompartment doors, grouped ground-level filters and greasing points aresimple to check. Maintenance checks can now be
done more quickly, further improvinguptime. A service mode is incorporat-ed into the I-ECU color monitor toallow diagnostic checks to be con-ducted. Four separate service inter-vals — engine oil / filter, fuel filter /water separator, hydraulic oil andhydraulic oil filter are all displayed onthe monitor. The quick anti-spill drainallows lubricant to be easily drainedin an environmentally friendly waywithout using tools. The EC140D, EC160D and
EC220D come fitted with VolvoCareTrack as standard. The Volvotelematics system can be accessedremotely to provide important infor-mation about the machine operation,such as fuel consumption and servicereminders to allow for improved plan-ning and operation. A comprehensiverange of service plans also are avail-able from the dedicated Volvo dealernetwork — ranging from routinewear inspections to full service agree-ments and operator eco training.For more information, call
828/650-2000 or visitwww.volvo.com.
Spanning the weight classes between 14 and28 tons (12.7 and 25.4 t), the EC140D,EC160D and EC220D also offer enhancedlifting capacity and stability, allowing heav-ier objects to be lifted.
BRANDEIS MACHINERY & SUPPLY COMPANYwww.brandeismachinery.com1801 Watterson Tr.Louisville, KY 40299502/491-4000502/499-3195 Fax Evansville, IN812/425-4491812/425-1171 Fax Corbin, KY606/528-3700606/528-9014 Fax Lexington, KY859/259-3456859/254-0783 Fax Stanville, KY606/478-9201606/478-9208 Fax Paducah, KY270/444-8390270/575-4907 Fax Indianapolis, IN317/872-8410317/872-8417 Fax Ft.Wayne, IN260/489-4551260/489-1620 Fax
CONTINENTAL EQUIPMENT CORP.A division of AISwww.aisequip.com3600 N. Grand River Ave.Lansing, MI 48906517/321-8000Fax: 517/321-4191
ROAD MACHINERY & SUPPLIES CO.www.rmsequipment.com5633 W Hwy 13Savage MN 55378952/895-9595800/888-9515Duluth, MN 218/727-8671800/888-9535Virginia MN218/741-9011800/752-4304Des Moines IA218/741-9011800/555-1445Sioux City IA712/252-0538800/633-9104Cedar Rapids IA319/363-9655800/616-6615Milan, IL309/787-1742800/633-9114
ROAD BUILDERSMACHINERY & SUPPLY CO., INC.1001 S. 7th St. TrafficwayKansas City, KS 66105913/371-3822913/371-3870 FaxOmaha, NE402/331-9200Lincoln, NE402/325-0447Grand Island, NE308/384-2620
Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 16, 2013 • Page 71
From Komatsu - The Excavator Experts
Efficient Komatsu Tier 4 Interim engines and advanced hydraulic system maximize productivity while providing up to 10% lower fuel consumptionEnhanced operator environment improves comfort and machine controlKomatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.
Komatsu Dash 10 excavators provide increased horsepower, improved operator comfort and reduced fuel consumption. The excavator experts at Komatsu can help you complete jobs more quickly, while lowering your fuel and maintenance costs.
DASH 10 EXCAVATORS
www.komatsuamerica.com
.komatsuamerica.comwww
.komatsuamerica.com
ROLAND MACHINERY CO.www.rolandmachinery.com816 N. Dirksen Parkway,Springfield, IL 62702217/789-7711Bolingbrook, IL630/739-7474Carterville, IL618/985-3399Marengo, IL815/923-4966Portage, IN219/764-8080Escanaba, MI906/786-6920906/786-5813 Fax Bridgeton, MO314/291-1330Cape Girardeau, MO573/334-5252Columbia, MO573/814-0083Palmyra, MO573/769-2056DePere, WI920/532-0165920/532-0526 Fax DeForest, WI608/842-4151608/842-4193 Fax Eau Claire, WI715/874-5400715/874-5401 Fax Franksville WI 262/835-2710262/835-2844 Fax Schofield, WI715/355-9898715/241-0044 Fax
GENERAL EQUIPMENT & SUPPLIESwww.genequip.com4300 W Main AveFargo ND 58103800/437-2924701/364-2190 Fax 905 20th Avenue SEMinot ND 58072800/825-04792300 Vermont AvenueBismarck ND 58504800/279-4437
Page 72 • February 16, 2013 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide
Doosan’s DX225LC, DX255LC Excavators Deliver PowerFrom clearing land for initial site develop-
ment, to excavating for utilities, to stabilizingfoundations for pavement installations, the abil-ity to tailor an excavator’s power to its projectscan increase productivity and reduce fuel con-sumption for contractors. Upgrades in powerand performance to the Doosan DX225LC-3and the DX255LC-3 excavators, combined withinterim Tier IV (iTIV) emission complianceupdates, are designed to help customers workmore efficiently. Improvements to the machines include new
selectable power modes and work modes thatprovide operators with the convenience of beingable to customize their machine’s power deliv-ery for specific tasks, in addition to adjusting thehydraulic flow to match attachment functions. Anew electronic fan clutch reduces fuel con-sumption and noise levels, while providingcooling system efficiency improvements on themachines.
PowerThe DX225LC-3 and DX255LC-3 are each
powered by a 6-cylinder Doosan DL06Kwater-cooled diesel engine that has beendesigned for use with a cooled exhaust gasrecirculation (CEGR) system, diesel oxi-dation catalyst (DOC) and diesel particu-late filter (DPF). The engines in this con-figuration are optimized to reduce nitro-gen oxides and articulate matter to complywith iTIV emission regulations. The tur-bocharged 167 hp (124 kW) engine on theDX225LC-3 and the 185 hp (138 kW)engine on the DX255LC-3 feature a high-pressure common-rail design with directfuel injection and electronic control. The versatile, mid-sized Doosan
DX225LC-3 and DX255LC-3 crawlerexcavators feature an electronic poweroptimizing system (EPOS), which pro-vides optimum power and fuel efficiencyvia four power modes, auto-idle andmachine diagnostics. Operators can workmore effectively with multiple workmodes, easy-to-read display monitors andprecise control levers. The new Power +mode provides improved performance and faster workgroupspeeds for heavy duty work.
PerformanceFour work modes — digging, breaker, shear and the new
lifting mode — allow operators to get maximum efficiencyand fuel economy in specific applications. In the liftingmode, the increased pump torque, low engine rpms and auto-matic power boost provide extra muscle when lifting mate-rials like pipe or concrete barriers. The 167 hp DX225LC-3 has an operating weight of
49,604 lbs. (22,500 kg) with standard boom, arm and 1.20cu. yd. (.9 cu m) bucket. Bucket breakout force is 33,510lbs., while arm breakout force is 23,810 lbs. Maximum dig-ging reach is 31 ft. 10 in. (9.7 m) at ground level and maxi-mum digging depth is 21 ft. 7 in. (6.6 m). Dump height is 22ft. 5 in. (6.8 m).
The 185 hp DX255LC-3 has an operating weight of56,659 lbs. (25,700 kg) with standard boom, arm and 1.43cu. yd. (1 cu m) bucket. Bucket breakout force is 39,463 lbs.,while arm breakout force is 28,219 lbs. Maximum diggingreach is 32 ft. 10 in. (10 m) at ground level and maximumdigging depth is 22 ft. 4 in. (6.8 m). Dump height is 23 ft. 1in. (7 m).
OptionsThe DX225LC-3 and DX255LC-3 feature a new intelli-
gent floating boom option that allows the boom of the exca-vator to “float” up or down. With this feature, the operatorcan focus more on the task while decreasing the machineworkload and increasing efficiency. The float mode lets theboom move freely up and down without hydraulic flow,while the breaker mode allows the boom to freely movedown, only without hydraulic flow. A temporary reset button
provides the ability to momentarily disen-gage the float modes, permitting hydraulicflow to activate the boom. Also offered is anair compressor, which is ideal for operatorsin remote and dusty locations to clean thecab. A new straight travel option streamlines
the travel and transport of the machines. Thisfeature is ideal for the straight forward-and-backward travel common in trenching appli-cations, as it provides a single foot pedal inthe right front corner of the cab floor thatoperates both tracks.
ComfortDoosan continues to focus on operator
comfort with further enhancements to theroll-over protective structure (ROPS) cabin.Both a seat-height lever and a tilting functionfor the seat cushion were added to the seat toallow the operator to find an optimum seat-ing position. The cabin mounting mechanismhas been improved with a thickened damp-ening plate, and an internal coil spring has
been added to reduce cabin vibration 20percent, allowing operators to worklonger days with less fatigue, accordingto the manufacturer.The spacious cab features an
adjustable suspension seat with head-rest and adjustable armrest. Joystickcontrols telescope up and down basedon operator preference. A multi-func-tion color LCD monitor panel displaysa variety of machine information,including operation history, flow ratecontrol and filter/oil information.Easy-to-operate joystick controls
make precise machine movements easy,while supplementary buttons are avail-able for control of additional equip-ment, such as grabs, crushers and grip-pers. In addition, the sound-suppressedcab keeps machine noise as low as pos-sible to reduce operator fatigue.
UptimeLong maintenance intervals and easy
access to service points increase machine uptime andproductivity. Examples include centralized grease inlets,wide side access doors for cleaning radiators and oilcoolers, boom pivot bushings with greasing intervals of250 hours, bucket pins with greasing intervals of 50hours and a large-capacity engine air precleaner thatremoves more than 99 percent of airborne particles andextends filter cartridge service life. The DX225LC-3 and DX255LC-3 — like all new
Doosan machines — are covered by a 48 hour parts guar-antee. The program guarantees that if a “machine-debili-tating” part is needed, Doosan will deliver it directly tothe end user within two business days or Doosan will payfor a replacement machine rental. The 48 Hour PartsGuarantee is subject to carrier delivery restrictionsand/or governmental agency delays. For more informa-tion, visit www.doosanequipment.com.
The DX225LC-3 and DX255LC-3 are each powered by a 6-cylinder DoosanDL06K water-cooled diesel engine that has been designed for use with acooled exhaust gas recirculation (CEGR) system, diesel oxidation catalyst(DOC) and diesel particulate filter (DPF).
The 167 hp (124 kW) DX225LC-3 has an operating weight of 49,604 lbs. (22,500 kg) withstandard boom, arm and 1.20 cu. yd. (.9 cu m) bucket. The 185 hp (138 kW) DX255LC-3has an operating weight of 56,659 lbs. (25,700 kg) with standard boom, arm and 1.43 cu.yd. (1 cu m) bucket.
Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 16, 2013 • Page 73
• Grease Filled, Not Oil• Used with OEM or
Bair’s Alloy Wheels• Rebuildable• Idlers Have Double
Stacked Bearings
TOLL FREE
855-575-LUGS (5847)9 1 3 - 9 4 7 - 3 9 3 4
www.bairproducts.com
REPLACEMENT/REBUILDABLE AXLE ASSEMBLIES
BAIR PRODUCTS, INC.2785 West 247th StreetLouisburg, KS 66053
PRODUCTS, INC.SUPER HUB UPGRADE KIT NEW
ON THE
MARKET
• Stop Wheel Failures!• CAT 247/257 A&B, ASV/TEREX 30/50/60 Models
• Forget Hubbed Wheels - Upgrade To Bolt-On Alloy Wheels• 10% Larger Axle Than OEM & 43% Larger Bearings
• Grease Packed / Preload Adjustable• No Inner Sleeves, Bushings, Spacers, Seals Or O-Rings!
1st
OEM
Bair’sAxle
2nd
OEM
STOP TRACK DERAILMENTS ON COMPACT TRACK LOADERS
• JOHN DEERE CTL Machines• CAT 279C/289C/297C/299C LOADERS• Turn One & Two Flange Idlers Into Three Flange Idlers
• Capture The Track’s Cleats At All Four Sides• Spread The Machine’s Weight, Torque Forces Out And Over The Drive Cleats
NEW ON THE
MARKET
TRACK INSTALLATION KIT
Install Rubber TracksFast & Easy WithHydraulic Tools,
Fits Most All CAT, ASV / TEREX Compact Loaders
NEW ON THEMARKET
The Original MFG TB-Series & VZ-Series BreakersFormerly distributed by Teledyne & BTI
Always ask for Genuine “OEM” Parts
3900 Ben Hur Avenue,
Willoughby, Ohio 44094www.toku-america.com SALES • SERVICE • PARTS
A PREMIER HYDRAULIC BREAKER MANUFACTURER FOR OVER 33 YEARS
3 Year Warranty - 2 Moving Parts - No Accumulators 100-12,000 Ft/Lb Product Range
Call: 877-954-9923FOR DETAILS ON
FREE DEMO!
3 YEARWARRANTY
Page 74 • February 16, 2013 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide
Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 16, 2013 • Page 75
Maximize Maximize Your
Maxax xiimmiizx ze
Serving the Constructor ® Call McCann Today!
Illinois
Indiana
McCannOnline.com
For skid steers, mini excavators, backhoes, and excavators
Maximum productivity from any toolAttachments that Deliver
Rentals
Available
ailablevAAv
Rentals
erseakPneumatic Brerseakaulic BrHydr
hanical ThumbsMechmentsCompaction Attac
CouplersTEFRA Auto Pedestal Systems
708-597-3110estwoodCr
312-942-9200Chicago
630-739-7770ookBolingbr
630-627-0000AddisonIllinois
ving the ConstructorSer
McCannOnline.com
219-865-6545ScherIndiana
847-526-9444aucondaWa
815-385-0420McHenry
708-597-3110estwood
312-942-9200Chicago
Call McCann T® Constructor r ®
McCannOnline.com
219-865-6545ervilleScher
Indiana
oday! McCann T Today!
Page 76 • February 16, 2013 • www.constructionequipmentguide.com • Excavators & Attachments Section • Construction Equipment Guide
Case CX210C Excavator Boosts Power, Fuel EconomyThe new Case CX210C excava-
tor achieves 160 net hp (119 kW)using Tier IV Interim-certifiedcooled exhaust gas recirculation(CEGR) technology that burnscleaner while delivering superiorhorsepower, according to the manu-facturer. A new narrow undercar-riage version, measuring 8 ft. 6 in.(2.59 m) wide, is available for easi-er transport.“The new Case CX210C excava-
tor delivers both the lower operatingcosts and higher productivity thatcontractors expect,” said RobMarringa, brand marketing manag-er, Case Construction Equipment.He cited 10-percent fuel economygains, 3-percent cycle time reduc-tions and 7-percent lift capacityincreases among crucial productimprovements.“An advanced version of the
Case intelligent hydraulic systemtechnology reduces total fuel con-sumption and improves perform-ance,” Marringa said. Boom econo-my control lowers engine RPMsduring the boom down and swingoperation, while the auto economycontrol lowers RPMs when the joysticks areinactive. Swing relief control technologymanages the hydraulic power allotted at thestart of the swing operation, and spool strokecontrol creates an automatic pressure adjust-ment during digging operations.“These fuel efficiency gains are especial-
ly significant,” Marringa explained. “Whiletypical CEGR systems lose fuel efficiency,we’ve actually increased fuel efficiency onour Case CX210C excavator by 10 percentover the previous B Series model. Whiledelivering exceptional fuel efficiency, theCase C Series models continue to be in thetop of their class for productivity.“Because excavators run with little
change to engine speed, CEGR technologywas the best choice for efficiency and con-venience.”
Increased ProductivityWith 3-percent faster cycle times than
previous models, the new Case CX210Cexcavator can load more trucks or trench fur-ther during every work shift. Along withfaster cycle times, the new Case excavatorsoffer operators smoother and easier controland maneuverability, according to the manu-facturer.The CX210C provides 7-percent more lift
capacity and boasts a 440 lb. (199.6 kg)increase in operating weight to tackle biggerjobs. The excavator has an operating weightof 47,800 lb. (21,685 kg), a bucket diggingforce 34,171 lb. (152 kN), arm digging force
of 24,729 lb. (110 kN) and a maximum digdepth of 21 ft. 10 in (6.65 m). Standard buck-et sizes range from .65 to 1.53 cu. yd. (.5 to1.17 cu m).The new excavator offers three power
modes — SP (speed priority), H (heavyduty) and A (automatic) — to allow opera-tors to choose the best mix of power and fuelefficiency. The throttle settings also adjustthe hydraulic settings for further tailoring tospecific tasks.
Improved Operator Comfort, Visibility
The Case CX210C excavator gives oper-ators a more spacious, comfortable and quietcab, with 19-percent better visibility fromthe operator’s seat (including a new roofskylight) compared to previous models.Noise reduction improvements, including
vibration refinement on the cab’s reinforcedtubular structures, create an extra-quiet cabenvironment, with automotive-like noiselevels as low as 69.9 dBa.The cab on the new Case excavator pro-
vides 7-percent more overall space and 25-percent more airflow. Air conditioning per-formance also has increased by 8 percent.New with the C Series is a rearview cam-
era that feeds video to a 7-in. LED monitorin the cab, enhancing operator confidenceand job site safety during machine operation.“The monitor in the Case C Series exca-
vators is large and clear,” Marringa said. Theoperator can easily switch between rear and
optional side camera views. Plus, they havesimultaneous visibility to key operating data,including a new function which providesfuel consumption per hour. Operators canuse this information to refine fuel efficiencyfor their particular operation.Case engineers designed the CX210C,
like other C Series excavators, with a verylow profile that enhances visibility from thecab while efficiently accommodating TierIV emission system components.The CX210C excavator also includes a
standard air-suspension seat and an in-cabauxiliary hydraulic setting system with anew option for 10 memory-recall settings tomake tool changes quick and easy for oper-ators. A Level 1 ROPS/FOPS(rollover/falling-object protection systems)cab structure helps enhance operator safety.
Ease of MaintenanceExtended service intervals for the Case C
Series excavators help reduce operatingcosts, O’Brien said.They are designed with 500-hour engine
oil change intervals, 5,000-hour hydraulicoil change intervals and 1,000-hour greasingintervals with easy maintenance systembushings. The cab includes new accesspoints to easily reach the air filter and fusebox. The Case CX210C excavator scored a2-percent improvement over previous mod-els on the SAE maintainability index.“The new Case C Series excavators effi-
ciently package the redesigned engine, cool-
ing and exhaust systems while maintainingexcellent serviceability and operator visibili-ty,” Marringa said. “The machines featurewide-open panels for easy access to servicepoints and ground-level access to groupedlubrication points.”
Full Range of AttachmentsCase offers a range of attachments for
the CX210C and other C Series excavators,including Case smart digging systems com-ponents such as pin-on buckets, couplerbuckets, the case multi-fit coupler and theSmartFit bucket tooth system.Case pin-on buckets are designed for
heavy-duty, high-capacity applicationssuch as digging in dense soil, clay, looserock and gravel. The Case multi-fit coupleroffers complete hydraulic latching,enabling excavator operators to quicklyattach and detach buckets and other com-ponents without leaving the cab. Designedfor the Multi-Fit Coupler, Case couplerbuckets feature integrated bucket pins toprevent any loss of breakout force thatmight otherwise occur when using a cou-pler device.The SmartFit system provides stronger,
more durable teeth and adapters, and ham-merless, reusable locking pins. TheSmartFit lineup includes general purpose,rock chisel, heavy penetrator, tiger, twintiger and flare teeth.For more information, visit
www.casece.com.
The CX210C has an operating weight of 47,800 lb. (21,685 kg), a bucket digging force 34,171 lb. (152 kN), arm digging force of 24,729lb. (110 kN) and a maximum dig depth of 21 ft. 10 in (6.65 m).
Construction Equipment Guide • Excavators & Attachments Section • www.constructionequipmentguide.com • February 16, 2013 • Page 77
MKT Side Clamp VibratoryDriver/Extractor
Mississippi Valley Equipment Company1198 Pershall Road • St. Louis, MO 63137 • 1-800-325-8001
Model V-2ESC Model V-5ESC
WirelessRemoteControl
RototiltPositioning
LowHeadroom
H-PileSheet Pile
ExcavatorMount or CraneSuspended
Manufactured in USA
www.mve-stl.com
NEW
SALESRENTALS
PARTSSERVICE 24/7
Page 78 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
AERIAL LIFTS
Manlifts
GRADALL / LULL
Sales - Service - Training
Modern Equipment
Sales & Rental
800-445-4381
ASPHALT EQUIPMENT
Asphalt Pavers
2010 Road Hog RH60200, 36
hours ..........................$75,000.
316-945-1015
Asphalt - Misc.
2005 Cimline 110D, 110 gallon,
25' hose and wand, diesel fired
kettle, 3415 hours........$14,995.
Star Equipment
800-369-2215
ATTACHMENTS
Attachments - Misc.
MEDIUM DUTY ASPHALT
CUTTER
Designed to Fit Wheel Loader
Buckets
Multiple Sizes and Attachment
Styles Available
Starting at
$1383
775-410-5237
BORING EQUIPMENT
Boring
2008 Yanmar CBL 40C,
includes PTO, 3 pt. hitch, back-
hoe, loader bucket attached
w/skid plate, great condition,
216 hours...................$32,500.
Vermeer Iowa
641-628-2000
COMPACTION EQUIP.
Pneumatic Rollers
1997 Champion 660, OROPS,
very good shape, 1301
hours..........................$27,500.
616-813-7955
CONCRETE EQUIPMENT
Concrete Equip. - Misc.
Somero Copperhead XO2.0,
10' screed head, lift harness,
narrow and flotation, tires, sen-
sors, 935 hours...........$19,995.
Star Equipment
800-369-2215
CRANES
Crane Inspections
ALL TYPES OF CRANES
INSPECTED AND CERTIFIED
Accredited by the US Dept.
of Labor Under 29CFR Part
1919 and Accredited by
CALOSHA
Call 215-639-2579
Atlantic Crane
Inspection Services
Visit us at
www.atlanticcrane.com
CRAWLER TRACTORS
Crawler Tractors
2010 John Deere 450J LGP,
OROPS, very low original
hours, excellent, 541
hours...........................$73,500.
2006 John Deere 450J LGP,
OROPS, very clean, 2914
hours...........................$42,500.
616-813-7955
2011 John Deere 650J XLT,
A/C, heat, hyd tilt, ROPS, cab,
2'' pads, 348 hours
..................................$124,500.
2002 John Deere 450H, 16''
pads, hyd tilt, PAT blade,
ROPS, 2564 hours
....................................$35,250.
316-945-1015
EXCAVATORS
Hydraulic Excavators
NH Construction Equipment
New & Used
Parts & Service
Modern Equipment
Sales & Rental
800-445-4381
2008 John Deere 350DLC,
medium arm, wide pads, cab
with A/C, 4979 hours.$187,500.
316-945-1015
2005 John Deere 35D,
OROPS, rubber track, 24''
bucket, very good, 3210
hours..........................$31,900.
2012 John Deere 135D, A/C,
blade, 24'' shoes, manual
thumb, bkt, warranty, excellent,
337 hours..................$129,500.
2008 John Deere 350DLC, hyd.
thumb, 13' stick, aux hyd, very
good, 3388 hours..
..................................$185,500.
616-813-7955
2006 Hitachi ZX50U, cab, A/C,
18'' bucket, very good, 3167
hrs....$31,900.
616-813-7955
Cat 3018, 2211 Tulsa, working
condition, 2369 hours....$8,500.
918-438-1560
Mini Excavators
NH Construction Equipment
New & Used
Parts & Service
Modern Equipment
Sales & Rental
800-445-4381
FORESTRY EQUIPMENT
Chippers
Woodchuck Towable diesel, in
very good condition, new
knives, paint and
decals.............................$4500.
All Offers Considered
Call Don
870-793-2147
If no answer call 501-388-9034
FORKLIFTS
Industrial Forklifts
GRADALL / LULL
Sales - Service - Training
Modern Equipment
Sales & Rental
800-445-4381
Rough Terrain Forklifts
Gehl RS519, open ROPS,
5000#, 19' max reach, aux hyd,
48'' carriage, 3500
hours...........................$31,995.
(2) Gehl RS642, 6000#, 42'
max reach, 115HP, open
ROPS, 48'' carriage, 2600/2625
hours....................Ea. $38,995.
Star Equipment
800-369-2215
LANDSCAPE EQUIP.
Landscape Loaders
2006 John Deere 210LE,
OROPS, new tires, Box blade,
very good, 1564
hours..........................$29,000.
616-813-7955
LOADERS
Backhoe Loaders
2007 John Deere 410G, cab,
4x4, ext dig, Pilot controls, ride
control, very good, 2495 hours
....................................$61,500.
616-813-7955
2008 Yanmar CBL40A, 3 pt
hitch, PTO, backhoe loader
bucket with skid plate, very
good condition, 216 hours
....................................$31,000.
641-628-2000
Crawler Loaders
Cat 963C, s/n BBD00385, 9380
hours, 1200 hours on new U/C,
runs good, no leaks....$62,500.
641-228-6944
Skid Steer Loaders
Mustang 2054, 50HP, cab,
heat, aux hyd, T-bat steer,
smooth bucket, 3175
hours...........................$13,995.
Mustang 2054, 50HP, cab,
heat, foot controls, smooth
bucket, 1300 hours.....$15,995.
Mustang 2054, 50HP, cab,
heat, smooth bucket, 1200
hours..........................$15,995.
Star Equipment
800-369-2215
2010 Bobcat S150, Bobcat SSL
with tooth bucket, enclosed
cab, heat, 6 mo. driveline war-
ranty, great condition, 120
hours...........................$22,500.
Ask for Glenn Engels
316-641-4896
Wheel Loaders
NH Construction Equipment
New & Used
Parts & Service
Modern Equipment
Sales & Rental
800-445-4381
Track Loaders
Takeuchi TL130C, 70 hp, cab,
heat, A/C, bucket, 3600
hours...........................$17,995.
Star Equipment
800-369-2215
2005 John Deere CT322, 12''
track, 2 spd, aux hyds, 2950
hours..........................$21,500.
2007 Bobcat T300, 18'' track,
A/C, aux hyds, tooth bucket,
2319 hrs.....................$29,000.
316-945-1015
SCRAPERS
Motor Scrapers
1984 Cat 615, EROPS, A/C,
rebuilt engine, painted, fair con-
dition, 12,000 hours....$49,500.
219-696-8911
TRAILERS
Drop Deck Trailers
2005 Load King 553SS Tri-axle
A.R. 55 ton self-contained, full
fenders, outriggers, 22' deck,
apitong floor, always covered,
new brakes..................$48,500.
Call Rick
563-503-1761
TRAINING
Operator Training
Are your operators compliant
with Federal Standards,
OSHA, ANSI, ISO?
MODERN GROUP
offers training for:
Front-end Loaders & Backhoes
Aerial work platforms (AWP)
(Boom & Scissor Lifts)
Rough Terrain Forklifts
(Gradall, Lull, JCB)
Skid Steer Loaders
For information, pricing or
reservations:
Call 1-800-223-3827
www.moderngroup.com
All prices include Trainer,
travel and material
NO HIDDEN COSTS
TRUCKS
Service Trucks
2001 IMT Lube Truck, 14' encl
lube body mounted on Sterling
Acterra chassis, 144k miles
...................................$45,995.
Star Equipment
800-369-2215
Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.
For just an additional $20 your ad can be posted on our online searchable database for 30 days
Ad runs for 2 (two) insertions - no changes in second insertion.
PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034
215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200CLASSIFIEDS
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 79
Page 80 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Easy Way To Advertise Your EquipmentValued At Less Than $1 Million Run In TwoConsecutive Issues For $95, Color Ad $145
2007 Kobelco SK480LC, 6798 Hrs.........$115,000Call David at 219-696-5680
Skidsteers Starting at $14,500Call Dan 612-306-4496 4-5 PK
Komatsu PC 40-7 Compact Excavator, 5970Hrs, Cab, 4 Ton Unit, Serviced and Ready forWork.............................................................$19,500
Call Dan 612-306-4496 4-5 PK
2009 Ditch Witch JT100, 785 Hrs, ExtendedWarranty Through 7/26/14. 1740’ Rod, 10 RodBoxes, Reamers Included, Complete Accessory Kit
Call Tim 630-665-5600 3-4 JM
2003 Ditch Witch 1820 Walk-Behind Trencher,Good Condition, 481 Hrs, 36”x4” Combo Chain
Call Tim 630-665-5600 3-4 JM
1991 John Deere 300D, S/N 775834, OpenROPS..........................................................$19,000Call 502/456-4050 Ask for Melissa or Albert 3-4 EB
2005 Takeuchi TB135, s/n 13516545, 2450 Hrs,Cab w/Heat and AC, Dozer Blade, 12” and 24”Bkts.............................................................$31,000
Call Steve at 630-878-8765 4-5 JM
3-4 JM
2005 Case 435, s/n N5M400417, 2600 Hrs, ROPS,Two Speed, Manual Coupler, Master Disconnect,Grid Heater .................................................$17,500
Call Mario 630-878-8396 4-5 JM
1994 Case 721B, s/n JEE0039571, 6250 Hrs, Cabw/Heat, Pro 1000 ACS Coupler w/2.75 Yd Bkt.............................................................................$38,000
Call Mike 219-712-7700 4-5 JM
Here's how the BARGAIN ADS Work:• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.
• Either email your copy & photo to: [email protected], or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.
• Cost is $95 per ad, $50 additional for color.
• Your ad will run for two consecutive issues in 1 region.
Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States.
For more information, call Construction Equipment Guide today at
800/523-2200
2006 Doosan DL400, s/n 5099, Cab, Heat, AC &Bucket, 2859 Hrs ......................................$115,000
Call David 219-696-5680 3-4 JM
2006 Grove YB 7720 XL, 20 Ton Carry DeckCummins Diesel Engine, Enclosed Cab w/Heat &A/C, 67’ Main Boom, 17’ Jib, 4 Wheel Drive &Steer, Certified, Wylie LMI, 1973 Hrs, Cleveland,OH..................................................................CALL
Andy 216-316-1511 4 EB
2011 Bobcat 5600 ToolCat, 399 Hrs, Enclosed Cab, Heat, A/C,HighFlow, PowerBobTach, Heavy Duty Battery, Track MudTires, Deluxe Road Pkg., E/N1036722 .........................$43,500
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Garden City, KS 4-5 JM
2007 Bobcat S330 SSL, 772 Hrs, Joystick, High Flow, E/N1053177 .........................................................................$33,100
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Garden City, KS 4-5 JM
2007 Bobcat S185 SSL, 717 Hrs, Enclosed Cab, Heat, SuspSeat, PowerBobTachTM, E/N 1054344......................$26,950
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Topeka, KS 4-5 JM
2010 Bobcat S150 Skid Steer Loader, 120 Hrs, EnclosedCab, Heat 6 Mo. Driveline Warranty, New Tooth Bkt
Glenn Engels 316-641-4896 • Wichita, KS 4-5 JM
1997 SK-120 Kobelco, 5350 Hrs, 2 Buckets, 3rdValve...........................................................$29,500
Courts Machinery • 507/678-2752 4-5 PK
New 2012 Grove RT765E-2, 65 TonRough Terrain, Tier4Cummins, 36’-110’Main Boom, 33’-56’Jib, Auxiliary Winch,A/C Cab, Block, Ball,Auxiliary Light &ConveniencePackage, FOBCleveland, OH ..Call
Call Andy at 216-316-1511
4 EB
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 81
HxGN LIVE – Hexagon’s International Conference, 3 – 6 June, 2013, Las Vegas, Nevada, USA!Join Leica Geosystems at the HxGN LIVE Conference –formerly known as Hexagon 2013! It’s a different name,but the same great conference – and an experience youdon’t want to miss. Group registration options and spe-cial discounts for previous conference alumni, educa-tional institutions, law enforcement agencies, andauthorized dealers are also available. For moreinformation contact: Angelique Ortega [email protected] +1 925/790-2318. See you in LasVegas!
Illinois Association of Aggregate ProducersFATALITY FREE 2012 for ILLINOIS AGGREGATE PRO-DUCERS! Congratulations go out from the IAAP Safety Committeeto everyone working in the aggregate mining industry forIllinois for another fatality free year! That’s nine years ina row working together ensuring Illinois is one of thesafest places to be a miner. As in previous years, theSafety Committee will celebrate this achievement by con-ducting a hardhat sticker design contest awarding a$250 cash prize to this year’s winner. Please take thisopportunity to express your creative talent by submittingone or more designs for consideration. Each entryshould clearly show the colors and state the safety slo-gan or other lettering you would like us to see on thesticker. Submit your art work by email to: IAAP OutreachManager Shawn McKinney [email protected] or by mail to: IAAP, 1115South Second Street, Springfield, Illinois 62704, on orbefore February 26, 2013. A winning entry will be cho-sen the next day by the IAAP Safety Committee thenreproduced for distribution to member companies in thespring.
AGC of America Annual Convention: Registration isnow open for the 2013 AGC Annual Convention andConstructor Expo, being held March 6 – 9 in PalmSprings. Room availability at the convention headquar-ter hotel (JW Marriott Desert Springs) is limited, so reser-vations should be made as early as possible. Completeconference details are available athttp://convention.agc.org or you may contact DeniseWoods, CMP, Director, Communications & Events, AGCof Minnesota, directly at 651/796-2186; toll free at800/552-7670 or website: www.agcmn.org.
2013 ANNUAL PAVING SEMINARTuesday, February 26, 2013Brought to you by Kirby-Smith Machinery, Inc., ThePaving AuthorityWho Should Attend: Owners – Superintendents –Equipment OperatorsArlington Convention Center1200 Ballpark WayArlington, Texas 760117:30 AM Registration 8 AM to 4 PM (lunch provided)Reservations Required by February 15, 2013To Register, go online at:www.kirby-smith.com and click on the Paving Seminarlink. ***limited seating!Morning Breakout Sessions:. Milling. Paving. Soil Stabilization. CompactionAfternoon General Sessions:. New Technology in Hot Mix Designs Including RAPand RAS. Advanced Theory “Cold in Place Recycling”. Paver Tamper Screeds and Emulsion Advancements. Advanced Paver and Milling Grade ControlExhibit Hall Equipment Displays:. Complete Asphalt Paving Train. From Utility to Mainline Milling Machines. Latest Design in Soil Stabilizers. Introduction to Oscillating Compaction
2013 MAASTO CONFERENCE: The WisconsinDepartment of Transportation will host the Mid-AmericaAssociation of State Transportation Officials (MAASTO)2013 Conference – “Sharing Strategies for Success.”The conference will be held JULY 16-19 at the HILTONHOTEL in downtown Milwaukee. One of the major eventsat MAASTO 2013 will be a trade show, where industryrepresentatives will have the opportunity to showcasematerials, technology, and professional services. Thetrade show will be held July 17 and 18 at the conferencehotel. More information on the trade show registration,layout, schedule, and fees will be available in early2013 at the conference website, which will be linked viathe MAASTO meetings webpage –http://www.maasto.net/meetings.html. If you are lookingto speak to someone with regard to the above confer-ence you may contact Denise Woods, CMP, Director,
Communications & Events, AGC of Minnesota, directly at651/796-2186; toll free at 800/552-7670 or website:www.agcmn.org.
AGC - St. Louis44th Annual Construction Safety Awards Banquet– Thursday, February 21, 2013,honoring the St. Louis Area’s Best and SafestConstruction Workers and Contractors at theOrlando Gardens Banquet Center, 4300Hoffmeister Avenue, just off highway 55 at UnionRoad. Featuring Grand Attendance Prize ARTICCAT ATV and over “44” attendance prizes, includ-ing Power Tools, Electronics, Sports Tickets, GiftCertificates, and more! Featuring this year: Don’t Leave Safety at Work!Every Attendee Receives Table Gifts Courtesy of theAGC of St. Louis!Pre-Registration is required. Please visithttp://wwwagcstl.org for more information orContact Beth Appelbaum at 314/480-3172, [email protected].
AGC – St. Louis***SAVE THE DATE!Beer, Brats & a Band … What more do you need?JUNE 13, 2013 (more details to follow).
Missouri Transportation Construction CoalitionLegislative Drive – In – TUESDAY, MARCH 5,2013, Jefferson City, MO,sponsoring members of the MissouriTransportation Construction Coalition. TheMissouri Transportation Construction Coalition isan effort by leaders in the transportation construc-tion industry to promote increases in revenue tomeet the $1 billion per year estimated by MoDOTto be needed for transportation improvements overthe next twenty years. Note: There is no registration fee for this specialevent, however, Registrations are required.Contact [email protected], for
more information. *The Missouri Highways and TransportationCommission will meet Wednesday, March 6 inJefferson City.
March 5-6, 2013 – 2013 Ohio Asphalt Expo,Columbus, OHRegistration is now open for the Ohio Asphalt Expo onMarch 5 thru 6, 2013 at the Columbus/Polaris HiltonHotel located at 8700 Lyra Drive, Columbus, Ohio43240.Office address and contact information: 6205 EmeraldParkway, Suite B, Dublin, OHPhone: 614/791-3600; Toll Free: 1/888-4HOTMIX;Email: [email protected].
GENERAL AGGREGATE EQUIPMENT, Fargo, NDTOP AGGREGATE INDUSTRY EQUIPMENT MANUFACTUR-ERS GATHER FOR EVENT!General Equipment & Supplies, Inc. and GeneralAggregate Equipment Sales expect around 300 atten-dees at their third Aggregate Seminar. The two-day eventwill be heldMARCH 5-6, 2013 at the Holiday Inn in Fargo, ND. If you would like more information on this event, or toschedule an interview with Don Shilling, please contactSara Frith at 701/364-2104 or [email protected].
March 6 - 8, 2013 – NTEA/THE WORK TRUCK SHOW,Indianapolis, INThe must-attend event for the work truck industry.. 500,000 sq. ft. of vocational trucks and equipment. Newest products and technical support from more than550 exhibitors. More than 60 educational sessions on top-of-mindindustry issuesFor more information on this event: Phone: 248/489-7090; Toll Free: 800/441-6832;Email: [email protected].
MARCH 19 – 21, 2013 – OAIMA (Ohio Aggregates &Industrial Minerals Association)Aggregates Academy & Expo, San Antonio, TexasAGG1 Aggregates Academy & Expo focuses exclusivelyon the aggregates industry as its leading educationresource. This event combines a plethora of educationsessions led by experts in virtually every segment of theaggregates industry with the latest innovations in equip-ment, technology and software on the AGG1 Expo show
floor. REGISTER TODAY at www.AGG1.ORG.You may contact the OAIMA at 1-800/OH.ROCKS.614/428-7954. Fax: 614/428-7919.
March 19 – 21, 2013 – World of Asphalt , San Antonio,TXDon’t miss the Industry’s Main Event! Register to attendand save 40%. Exhibit Show Floor is Almost Sold Out!Hurry, space is still available but going fast. Reservespace today!Co-located with AGG1 Aggregates Academy & ExpoMarch 19 – 21, 2013, San Antonio, TX, USA, Henry B.Gonzalez Convention CenterWorld of Asphalt Show & Conference is the leadingexposition and education resource for the asphalt indus-try. The event features in-depth industry-focused educa-tional programming and comprehensive exhibits thatshowcase the latest technologies and innovations inasphalt-related equipment, products and services. World of Asphalt Show Management: Association ofEquipment Manufacturers6737 West Washington Street, Suite 2400, Milwaukee,WI 53214-5647 USAToll Free Telephone: 800/867-6060 or [email protected].
March 20 & 21, 2013 – 34th West Virginia Construction& Design ExpositionThe region’s largest trade show for the Construction andDesign Industries invite you to be a part of the 34th
Annual Exposition – EXPO!The Contractors Association of West Virginia, AmericanInstitute of Architects – WV Society of ProfessionalEngineers & WV Utility Contractors Association, with thesupport of 24 co-sponsors, want the opportunity tomake EXPO work for you. Let us hear from you, if youhave questions! [email protected]. Pat Parsons,Show Manager and Alice George, Office Manager
April 23, 2013 IAAP CONVENTIONThe IAAP’s 45th Annual Convention is scheduled forTuesday, April 23, 2013, at the Crowne Plaza Hotel inSpringfield, Illinois. As always, our program will featurea series of educational seminars focusing on topics ofinterest to aggregate producers and to the companiesselling goods and services to the mining industry. MAKEPLANS TO ATTEND THE 45th ANNUAL IAAP CONVENTION!
BusinessCalendar
The Easy Way To Advertise Your EquipmentValued At Less Than $1 Million Run In TwoConsecutive Issues For $95
2012 Takeuchi TL240, 545 hrs, 76” bkt, 86 hp Yanmar, Hyd.coupler, 2,083# capacity, cab, A/C, 10,365 lbs .........$49,500
Call Steve Samosky • 262/373-2151 4-5 JM
2008 New Holland L160, 290 hrs, 66” tooth bar bkt, 46 hp,single speed, OROPS, 1,600# capacity, 5,534 lbs.....$19,700
Call Steve Samosky • 262/373-2151 4-5 JM
2005 Cat 287B, 1,485 hrs, OROPS, 82 hp, 10,300 lbs, 80”bkt, 2,520# capacity ..................................................$24,600
Call Steve Samosky • 262/373-2151 4-5 JM
2009 New Holland L185, 1,900 hrs, 72” bucket, cab, heat, 2 speed, 2,500# capacity, 82 hp, 7,100 lbs...............$24,900
Call Steve Samosky • 262/373-2151 4-5 JM
2007 New Holland L190, 850 hrs, 78” bucket, OROPS, 90hp, 2 speed, 2,800# capacity, cold start, 7,765 lbs...$25,900
Call Steve Samosky • 262/373-2151 4-5 JM
2000 New Holland LS180, 3,000 hrs, 72” bucket, 2,555#capacity, OROPS, 2 speed, 67 hp, 7,223 lbs.............$12,300
Call Steve Samosky • 262/373-2151 4-5 JM
Here's how the BARGAIN ADS Work:
• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.
• Either email your copy & photo to: [email protected], or mail to:Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.
• Cost is $95 per ad, $50 additional for color.
• Your ad will run for two consecutive issues in 1 region.
Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyersin the Midwest States.
For more information, call Construction Equipment Guide today at
800/523-2200
Page 82 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
EARTH MOVING EQUIPMENT | WE ARELOOKING FOR 140G 1990+ W/RIPPER,140H, 330CL, 330BL, 320CL, 92077+YEAR, 930 77+YEAR, 950 SERIES,966 SERIES 980C-F-FII-G-GII SERIES,988B 1990+, D8K-L-N-(R-T 2000-2005W/RIPPER) URGENT D9L-(N-R W/RIP-PER) D10N D11R MACHINES SHOULDBE LOCATED IN USA OR CANADA.PREFER NOT ADVERTISED. SHOULDBE IN WHOLESALE PRICE.CONTACT: DANPHONE: 92-333-301-3801EMAIL: [email protected]––––––––––––––––––––––––––––––––USED WALDON LOADERS | LOOKINGFOR LATE MODEL USED WALDONLOADERSCONTACT: MERLE PATZKOWSKYPHONE: 580-227-3711FAX: 580-227-2165EMAIL: [email protected]––––––––––––––––––––––––––––––––CONSTRUCTION | ANY LONG REACHBOOMS OR STICKS. LONGER THANNORMAL BOOM OR STICK. LONGREACH EXCAVATOR FRONTSCONTACT: TYLER PALUMBOPHONE: 330-365-0654EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT D9R WANTED | LOOKING TO BUYOLDER UNITS OF CAT D9R. 1998 - 2004MODEL REQUIRED.CONTACT: RAYEMAIL: [email protected]––––––––––––––––––––––––––––––––DRESSER TD15E LGPCONTACT: CASEY SWEITZEREMAIL: [email protected] ––––––––––––––––––––––––––––––––35 TON LOW BOY TRAILER IN GOODCONDITIONCONTACT: WALLACEPHONE: 540-420-3576FAX: 540-576-3780EMAIL:[email protected]––––––––––––––––––––––––––––––––CAT 140H MOTOR GRADER | WE NEED4 UNITS OF USED CAT 140H, YEARMODEL 99 - 02. SEND PICTURES, SERI-AL NUMBER, INSPECTION REPORTAND BEST WHOLESALE PRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected] ––––––––––––––––––––––––––––––––PILE HAMMERS | LOOKING TO PUR-CHASE ICE, MKT, APE, OR PVE VIBRA-TORY PILE HAMMERS ALL THE TIME.ALSO BUYING PILE HAMMER SERVICEMANUALS FOR FOSTER/VULCAN ASWELL. YOUR BEST SOURCE TO TURNYOUR SURPLUS PILE HAMMERS INTOCASH.CONTACT: JEFF LAWSONEMAIL: [email protected]––––––––––––––––––––––––––––––––
NEEDED ALL THE TIME 12 MONTHS 7DAYS BULLDOZERS USA NOT ADVER-TISED CONTRACTOR D6 AT D10 1985AND UP | WANT TO BUY FROM USERNOT ADVERTISED BULLDOZER D6ATD10 1985 ANS UPCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975 OR MOBILE 1 514 386 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––3 OF HITACHI CG70 STEEL BOTTOMROLLERSPHONE: 408 833 9400EMAIL: [email protected] ––––––––––––––––––––––––––––––––ALL EQUIPMENT WANTED!! | WANTEDTO BUY CONTRACTOR OWNED EQUIP-MENT!!!CONTACT: JOEPHONE: 1-570-250-5559EMAIL: [email protected]––––––––––––––––––––––––––––––––PILE HAMMERS | LOOKING FOR ICE 44-50 PILE HAMMER AND ICE 416 PILEHAMMERS. LOOKING TO BUY IMMEDI-ATELYCONTACT: WILLIEEMAIL: [email protected]––––––––––––––––––––––––––––––––USED KOMATSU ENGINES | LOOKINGFOR USED OR REBUILDABLE ENGINECORES FOR ALL DIFFERENT KOMATSUAPPLICATIONS.CONTACT: DAVE C.PHONE: 248-634-1978FAX: 248-634-3488EMAIL:[email protected]––––––––––––––––––––––––––––––––SKID STEER | 2109 MUSTANG OR 7810GEHL UNDER 2000 HRS CAB AIR HEATQUIK TACH FOOT CONTROLSCONTACT: GILPHONE: 701 368 1525EMAIL: [email protected]––––––––––––––––––––––––––––––––CONSTRUCTION EQUIPMENT | I HAVEBUYERS LOOKING FOR PACKAGES OFCONSTRUCTION EQUIPMENT, LOCAT-ED IN NORTHEAST USACONTACT: GARY SANTOMEROEMAIL: [email protected]––––––––––––––––––––––––––––––––BUCKETS | 48 IN BUCKET FOR 160LCJOHN DEERECONTACT: GREG WOODEMAIL: [email protected]––––––––––––––––––––––––––––––––993K COAL BUCKET | NEED A NEW,USED OR REBUILT 993K COAL BUCKETCONTACT: JEFF WILLISONPHONE: 918-407-8787EMAIL: [email protected]––––––––––––––––––––––––––––––––CATERPILLAR NEW GENSET NATURALGAS G3520C | NEED TO KNOW PRICEOF NEW CATERPILLAR NATURAL GASGENSETS 1950KW \ 50HZ \ WITH CABINCONTACT: MASTANEH DARYAIZADEHPHONE: 09002126717117FAX: 0902126717119EMAIL: [email protected]––––––––––––––––––––––––––––––––
FORD 550 TRUCKCONTACT: ANTHONY GAGLIOTIPHONE: 604853057FAX: SAMEEMAIL:[email protected]––––––––––––––––––––––––––––––––BOBCAT X 331 MINI EXCAVATOR RUB-BER TRACKS USEDCONTACT: RICPHONE: 407-947-9505EMAIL: [email protected]––––––––––––––––––––––––––––––––STRUCK CRAWLER | LOOKING FOR ASTRUCK MINI COMPACT TRACTORWITH OR WITHOUT ATTACHMENTSCONTACT: TAYLORPHONE: 614-271-0342EMAIL: [email protected]––––––––––––––––––––––––––––––––FLOOR GRINDER - LOCATED IN SEATTLEPHONE: 425-749-0001EMAIL: [email protected]––––––––––––––––––––––––––––––––AUTOMATIC BAR STRAIGHTENINGMACHINECONTACT: BAQARBASHA.S.APHONE: +919688677317EMAIL:[email protected]––––––––––––––––––––––––––––––––WE BUY MANUALS | LOOKING TO PUR-CHASE NEW OR USED SERVICE, SHOP,PARTS, OPERATOR’S OR OTHER MAN-UALS FOR EQUIPMENT, TRUCKS ANDVEHICLES OF ALL SORTS. WE PREFERIN BULK, PERHAPS YOU HAVE COM-PUTERIZED YOUR SERVICE OR PARTSOPERATION AND YOU HAVE BOOKSOR MANUALS YOU NO LONGER NEED,OR INVENTORIES YOU HAVE NOTSOLD. PERHAPS AS A DISCONTINUEDPRODUCT LINE. WE WILL PURCHASEIN ANY USEABLE CONDITION IN ANYAMOUNT YOU HAVE.CONTACT: GRACE FRANCESPHONE: 270-849-2270EMAIL: [email protected]––––––––––––––––––––––––––––––––184/28 BACKHOE TIRE | 18.4/28 BACK-HOE TIRE USED OR NEWCONTACT: WAYNEPHONE: 803 564 6310EMAIL: [email protected]––––––––––––––––––––––––––––––––CANOPY SWEEPS FOR D4H | I AMLOOKING FOR SCREENS FOR CANOPYAND ROPS SWEEPS FOR CANOPYCONTACT: PETERPHONE: 530-532-0652FAX: SAME AS ABOVEEMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU BR380JG1 TRACK JAWCRUSHER | LATE MODEL, LOW HOURUSA LOCATIONCONTACT: RICHARDPHONE: 603-828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––
NORMAL BOOM OR STICK LONGREACH EXCAVATOR FRONTSCONTACT: JAY MUNOZEMAIL: [email protected]––––––––––––––––––––––––––––––––USED 744H GP PIN ON BUCKETCONTACT: JEREMY KINGPHONE: 715-571-0927EMAIL: [email protected]––––––––––––––––––––––––––––––––BLADES STOCK#SP-018PHONE: 850-292-4017EMAIL: [email protected]––––––––––––––––––––––––––––––––O&K 120E PART | NEED O&K 120EBACKHOE, THE BOOM AND CYLINDERPART. MORE INFO PLS EMAIL.CONTACT: JERRYPHONE: 0031227570364EMAIL: [email protected]––––––––––––––––––––––––––––––––TEREX TR100 | LOOKING FOR TEREXTR100 DUMPTRUCKS, 2-4 UNITS. MUST HAVE EPA.CONTACT: JERRYPHONE: 0031227570364EMAIL: [email protected]––––––––––––––––––––––––––––––––MOTOR GRADERS | WE ARE LOOKINGTO PURCHASE SEVERAL UNITS OF140H (99 - 02), AND 14 G/H (72 - 00)CATERPILLAR MOTOR GRADERS,PREFERABLY WITH RIPPER. GRADERSMUST BE GOOD LOOKING AND INWORKING CONDITION WITH OLDPAINT. SEND PICTURES, CONDITION,SERIAL NUMBER AND FINAL OFFERPRICE.CONTACT: AIMN BLBOLPHONE: +971504814823EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR LARGER IMPACTCRUSHERS - SCREENS - CONVEYORS -SCALES IN THE MIDWEST REGION.EMAIL: [email protected]––––––––––––––––––––––––––––––––USED CARGO VANS | WANTED 100USED CARGO VANS FLEETS ONLY,AS MANY AS POSSIBLE NO DEALERSPLEASE.CONTACT: FRANKPHONE: 570-562-3291EMAIL: [email protected]––––––––––––––––––––––––––––––––CATEPILLAR GRADER 12G AND 140G |IF YOU HAVE ANY IN STOCK PLEASESEND PICTURES AND DETAILS.CONTACT: RIZ SUNESARAPHONE: 832-528-0786FAX: 281-727-0415EMAIL:[email protected]––––––––––––––––––––––––––––––––CATERPILLAR 926E AND 936F | I NEEDURGENT CAT 930, 926E AND 936F,PLEASE SEND ME PICTURES ANDDETAILS.CONTACT: ABDAL SALEEMPHONE: 966 3 842 8312FAX: 9666 3 312326EMAIL:[email protected]––––––––––––––––––––––––––––––––
ANY CONSTRUCTION EQUIPMENTWANTED | LOOKING FOR CAT 330CL/DL <3000 HOURS, AUX HYD. FORCONTRACTOR EXCAVATORS DOZERSLOADERS COMPACTORS ARTICULAT-ED TRUCKS OFF HIGHWAY TRUCKSMOTOR GRADERS SCRAPERS ONROAD TRUCKS BUYING OR SELLINGLET JOE KNOW!CONTACT: JOEPHONE: 570-360-5162EMAIL: [email protected]––––––––––––––––––––––––––––––––MOBILE TRAILERSEMAIL:[email protected]––––––––––––––––––––––––––––––––LOOKING FOR BACKHOES. PLEASECALL OR EMAIL WITH WHAT YOUHAVE.CONTACT: CODYPHONE: 1(810)834-2571EMAIL:[email protected]––––––––––––––––––––––––––––––––TELEHANDLER | 6-8,000 LBS TELEHAN-DLER WITH 40FT REACH. 2005 ORNEWERCONTACT: MANAGERPHONE: 618 789-0449FAX: 8886510449EMAIL:[email protected]––––––––––––––––––––––––––––––––ATLAS COPCO | ATLAS COPCO’S XAS750 JD7 TIER 4A COMPRESSOR MEETSNEW EMISSION STANDARDS. SENDASKING PRICECONTACT: MR MO ALABEDEPHONE: 00353899674351EMAIL: [email protected]––––––––––––––––––––––––––––––––WE SELL ALL KINDS OF EQUIPMENTMANUALS. GIVE US A CALL, WE MIGHTHAVE WHAT YOURE LOOKING FOR.CONTACT: GRACE FRANCESPHONE: 270-849-2270EMAIL: [email protected]––––––––––––––––––––––––––––––––LULL 844 TT 34 PARTS MACHINE ORPARTS NEW OR USED.CONTACT: SEANPHONE: (815)566-0442FAX: (815)827-3246EMAIL:[email protected]––––––––––––––––––––––––––––––––KOMATSU PC308 TRACK EXCAVATOR |LATE MODEL, LOW HOUR EAST COASTUSA LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––OLD CHAMPION ROAD GRADERCONTACT: ALVIN WALDNERPHONE: 605-778-6776FAX: 605-778-6778 |EMAIL:[email protected]––––––––––––––––––––––––––––––––
NEEDED BULLDOZER D6N LGP ENCCAB USER USA LOW HOURS LOWPRICE • WANT TO BUY FROM USA«CONTRACTORS D6N LGP D7G D8KCONTACT: JEAN MAURICE BOUTINPHONE: 1-450-346-8975 OR MOB 1-514-386-8975EMAIL:[email protected]––––––––––––––––––––––––––––––––WE BUY EQUIPMENT MANUALS (USEDOR NEW). WE PREFER 100 OR MORE.CONTACT: GRACE FRANCESPHONE: 270-849-2270EMAIL: [email protected]––––––––––––––––––––––––––––––––CATERPILLAR D8R DOZEREMAIL: [email protected]––––––––––––––––––––––––––––––––WE NEED 2X 50T RIGID DUMP TRUCK.PRICE ~ 50K USD.CONTACT: JERRYPHONE: 0031227570364EMAIL: [email protected]––––––––––––––––––––––––––––––––CAB OR CANOPY FOR AN OLDER CAT120 GRADER • WE ARE LOOKING FORAN ENCLOSED CAB OR CANOPY FORA CATERPILLAR 120 MOTORGRADER. •THINK THAT A CAB OR CANOPY OFFOF A 12E OR F WILL WORK ALSO.PLEASE OFFER WHAT YOU HAVE.CONTACT: WENDELL CAINPHONE: 001-770-381-8984FAX: 001-770-381-6977EMAIL:[email protected]––––––––––––––––––––––––––––––––BOBCAT SKID STEER LOADERS • AMLOOKING FOR CONTRACTORS ORLANDSCAPERS WHO ARE LOOKING TOSELL THEIR USED BOBCAT BRANDSKID STEER LOADERS THAT ARELOCATED IN THE SOUTH EASTERNUNITED STATES. • PREFER LARGEFRAME MACHINES, S330, S300, S250,T320, T300, T250 EQUIPPED WITH THE"GOLD PACKAGE", BUT I WILL BUYANY BOBCAT THAT YOU HAVE FORSALE. DONT TRADE IT IN, SELL IT TOME. **DEALERS - DONT WASTE YOURTIME RESPONDING**CONTACT: WARRENEMAIL: [email protected]––––––––––––––––––––––––––––––––AM LOOKING TO BUY CONSTRUCTIONEQUIPMENT REPAIR MANUALS FORLATE MODEL NAME BRAND CON-STRUCTION EQUIPMENT.CONTACT: WARRENEMAIL: [email protected]––––––––––––––––––––––––––––––––ROTO TILLER ATTACHMENTPHONE: 250-378-7505EMAIL: [email protected]––––––––––––––––––––––––––––––––1000 OR MORE ROAD MACHINERY.CONTACT: SAEED.MPHONE: +98-912-472 29 89FAX: +98-21-48 62 295EMAIL:[email protected]––––––––––––––––––––––––––––––––
Attention Contractors!Post Your Wanted To Buy Listings FREE!
Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website
for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 83
ALEX LYON & SON
AUCTIONEERS
www.lyonauction.com
315-633-2944�
• Middletown, NY
Sat., March 2, 2013For: Construction and SupportEquipment, Trucks andTrailers
• Iowa City, IA
Wed., March 13, 2013For: Construction Equipment,Attachments, Trucks andTrailers
• Las Vegas, NV
Sat., March 16, 2013For: Late Model Rental FleetEquipment
• Atlantic City, NJ
Thurs.-Sun., March 21-24,2013For: Construction Equipment,Trucks and Trailers
• Adams Center, NY
Sat., May 4, 2013For: Construction Equipment300+ Collectible Cars, 1940-1970, US Army Jeeps andMore
RITCHIE BROS.
AUCTIONEERS
www.rbauction.com
402-421-2631
• Orlando, FL
February 18-23, 2013
• Chehalis, WA
March 5, 2013
• Fort Worth, TX
March 5-6, 2013
• Salt Lake City, UT
March 8, 2013
• Denver, CO
March 12, 2013
• Columbus, OH
March 14, 2013
• Los Angeles, CA
March 19, 2013
• Northeast, MD
March 19, 2013
• Raleigh-Durham, NC
March 21, 2013
• Sacramento, CA
March 22, 2013
• Nashville, TN
March 27, 2013
• Atlanta, GA
March 28, 2013
• Williamsport, PA
April 10, 2013
• Pittsburgh, PA
April 11, 2013
BAR NONE AUCTION
www.barnoneauction.com
866-372-1700�
• San Bernardino, CA
Sat., February 23, 2013For: Construction Equipment
• Sacramento, CA
Sat., March 9, 2013For: Construction Equipment
• Sacramento, CA
Sat., March 23, 2013For: Construction Equipment
CAT AUCTION SERVICES
www.catauctions.com
866-750-9432�
• Online Timed Auction
Wed., March 20, 2013For: Construction Equipment
• Kansas City, MO
Wed., March 27, 2013For: Construction Equipment
• Denver, CO
Thurs., April 4, 2013For: Construction Equipment
DEANCO AUCTIONS
www.deancoauction.com
601-656-9768
• Philadelphia, MS
March 20-22, 2013For: 12th Annual SpringtimeContractors EquipmentAuction
• Philadelphia, MS
May 29-30, 2013For: Construction Equipment
• Philadelphia, MS
July 17-18 2013For: Construction Equipment
• Philadelphia, MS
September 18-19, 2013For: Construction Equipment
• Philadelphia, MS
November 20-21, 2013For: Construction Equipment
DEL PETERSON &
ASSOCIATES
www.delpeterson.com
�800-492-9090
• Online Only
Thurs., February 19, 2013For: Construction and FarmEquipment, Trucks andTrailers
DON SMOCK
AUCTION CO., INC.
www.dsa-auctions.com
765-778-9277
• Pendleton, IN
March 29, 2013For: Construction Equipment
• Pendleton, IN
June 21, 2013For: Construction Equipment
• Pendleton, IN
September 20, 2013For: Construction Equipment
• Pendleton, IN
December 13, 2013For: Construction Equipment
GLOBAL FORCE
AUCTION GROUP
www.gforceauction.com
�877-631-0650
• Online Only
February 26-27, 2013For: Construction Equipment
• West Friendship, MD
Sat., March 2, 2013For: Part 2 of Liquidation ofNew River Landscapes andLocal Contractors
HESS AUCTIONEERS
www.hessauctioneers.net
�866-511-2493
• Marietta, PA
Fri., February 22, 2013For: Construction Equipment,Trucks and Trailers
HILCO INDUSTRIAL, LLC
www.hilcoind.com
�847-313-4747
• Tuscaloosa, AL
March 20-21, 2013For: Construction Equipment
HUNYADY AUCTION
COMPANY
www.hunyady.com
�800-233-6898
• Laflin, PA
Wed., March, 13 2013For: Construction Equipment,Trucks and Attachments
IRAY AUCTIONS
www.iraymn.com
�320-968-7230
• Foley, MN
Friday, March 8, 2013For: Truck and Trailer Auction
IRON PLANET AUCTIONS
www.ironplanet.com
�888-433-5426
ONLINE AUCTIONS
Go to www.ironplanet.com to
view the complete auction
schedules, inspection reports
and to place your bid!
• ONLINE ONLY
February 26-28, 2013For: Construction Equipment
MYRON BOWLING
AUCTIONEERS, INC.
www.myronbowling.com
�513-738-3311
• Tuscaloosa, AL
Wed./Thurs., March 20-21,2013For: Well MaintainedHighway ConstructionEquipment
NITKE AUCTIONS
www.nitkeauctions.com
�715-362-6162
• Fond Du Lac, WI
March 23, 2013For: Complete DispersalLoudolff Excavating andGrading
• Wausau, WI
April 26, 2013For: Construction Equipment
PETROWSKY
AUCTIONEERS INC.
www.petrowskyauctioneers.co
m
�860-642-4200
• North Franklin, CT
Thurs.-Sat., March 21-23,2013For: Construction Equipment
PURPLE WAVE AUCTION
www.purplewave.com
�866-608-9283
• ONLINE ONLY
Thurs., February 28, 2013For: Construction Equipment
• ONLINE ONLY
Thurs., March 14, 2013For: Construction Equipment
QUANTOS AUCTIONS
www.quantosauctions.com
253-236-8555
• ONLINE ONLY
March 13,, 2013For: Construction Equipment
UTILITY AUCTIONS
www.utilityauctions.net
�302-530-9103
• Wilmington, DE
Fri., February 22, 2013For: Construction and UtilityEquipment
YODER & FREY
AUCTIONEERS, INC.
www.yoderandfrey.com
�419-865-3990
• Kissimmee, FL
February 11-18, 2013For: Construction Equipment,Trucks and Trailers
AuctionsComing
Nortrax has announced that it has purchased the assets ofJohn Deere Construction and Forestry equipment dealer HoltEquipment Company and began leasing Holt’s dealershipsites. Holt is based in Louisville, Ky., with territory locations in
Louisville, Richmond, London and Bowling Green, andencompassing a 78-county trade area across Kentucky andIndiana. “With this transaction Holt and Nortrax are showing an
even stronger commitment to the construction and forestryequipment business. Current and future customers canexpect that Nortrax will continue to serve them with integri-ty, quality, commitment and innovation,” said Tim J.Murphy, Nortrax president and CEO. Nortrax, based in Tampa, Fla., is a wholly owned sub-
sidiary of John Deere. “Combined with our operations inTennessee, Nortrax is well suited to provide exceptional cus-tomer service to John Deere customers across Kentucky andselect counties in Indiana.”Murphy said that employment levels at the Holt locations
will be maintained according to business needs and there areno plans to close existing Holt locations. “The intent is togrow the Nortrax business, and at the same time create newopportunities for all employees. Nortrax and John Deere willcontinue to invest resources to build a great business,”Murphy said.
Nortrax AcquiresDeere Dealer Holt,Leases Holt’s Sites
Page 84 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
TFCI, IDOT Discuss FY13 Supplemental Appropriations Bill On Jan. 17, representatives of the
Transportation for Illinois Coalition (TFIC)met with IDOT Secretary Ann Schneiderand key agency staff. The meeting wasorganized by IAAP Executive Director JohnHenriksen, the new chair of the TFIC StateHouse Committee, and discussed:• The status of the IDOT FY13
Supplemental Appropriations bill that stalledin the Senate earlier this month.• A proposed TFIC media strategy
designed to build support for the IDOTFY13 Supplemental Appropriations bill.• IDOT plans to secure the remaining cap-
ital bond authorization and prospects for anew capital program.As outlined below, the TFIC members
gathered in Springfield, along with theChicago contingent joining by video confer-ence, had a useful conversation with theirIDOT partners.According to Secretary Schneider, an
effort will be made to move the IDOT FY13Supplemental Appropriations bill early inFebruary 2013 as part of a larger supple-mental bill for State government operations. The bill currently being developed will
have the same IDOT components as the leg-islation that stalled earlier this year as well asadditional funding for social programs such
as mental health, children and family servic-es and housing. Secretary Schneider also committed
Director of Highways Omer Osman to workwith TFIC to develop a media strategydesigned to build interest in this bill (in par-ticular by explaining the lack of work attrib-utable to the failure to pass a bill this spring).The TFIC members and IDOT represen-
tatives then discussed plans to secure, duringthis legislative session, the remaining capi-tal bond authorization for roads and bridges,the sum of $400 million split equallybetween local roads and state highways. Secretary Schneider confirmed that the
Quinn Administration is interested in a newcapital bill this legislation session, in therange of $3 to 5 billion, to fund transporta-
tion, schools and water projects. In order to pay for this program, all rev-
enue ideas are “on the table”, except a gastax increase. Secretary Schneider concludedthe meeting by expressing optimism that thesupplemental would be considered andapproved in early February and looked for-ward to working with TFIC and others on apossible capital bill this spring.
(L-R): Omer Osman, director of highways, IDOT; Craig Fink, DeWitt County engineer; Matt Zick, Crawford, Murphy & Tilly;Matt Davidson, AGCI; Ann Schneider, IDOT secretary; Jennifer Morrison, TFIC; and John Henriksen, IAAP, met on Jan. 17 to dis-cuss the status of the FY 13 Supplemental Appropriations Bill.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 85
California Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change. Copyright © 1999-2012 IronPlanet, Inc. All Rights Reserved. IronPlanet®, IronClad Assurance® and Auctions you can trust® are registered service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.
2009 CAT 950H
2012 CAT 120M2
2007 CAT TL943
1998 CAT IT28G
2008 LEEBOY 685
2011 CAT D6T LGP
2007 CAT CS-433E
(4) CAT 740
2008 CAT 963D
2010 CAT 336DL
2002 PETERBILT 379
(3) VOLVO A40D
2007 VOLVO A25D
2010 CAT 928HZ
1999 CAT AP-1055B
REX MODEL S CONCRETE PLANT
100% Online
nline% Online l e
ing equipment frtureaF
oming equipment fr
120M2T2012 CA AT
LGP D6TT1 CA AT201
336DLT2010 CA AT
336DL 2010 CA
928HZT CA AT
950HT2009 CA AT
6852008 LEEBOY Y 685
963DT2008 CA AT
963D VOL2007
VO A25DVOLLVO A25D
TL943TCAT2007
CS-433ET2007 CA AT
379T2002 PETERBIL L
379 CA1999
AP-1055BTAAT
. P58795207d #noy Bnapmon Coitcua AinrofilaC
rn tau cos ynoitcud Ana
IT28GT1998 CA AT
F
IRONPL
egnaho ct tcejbut snempiuq. Eetao dt tsiy lranimiler. Ptsu ® cn, ItenalPnorf Is okrae mcivred seretsigee rr a
740T(4) CA AT
.WWW
27 – MAR. 1. FEB
OM
s Rthgil Rl. Acn, ItenalPnor2 I102-999t © 1hgirypo. Ceehf ty otrepore phe trs adnard bns akrar mehtl ol. A
VO A40DVOLV (3)
C.TANEIRONPL
27 – MAR. 1
tenalPnor. Idevreses R ® ecnarussd AalCnor, I ®
.srenwe ovitcepser ri
VO A40D S CONCRETE PLANTREX MODEL
S CONCRETE PLANT
Page 86 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Alex Lyon & Son Kicks Off Sunshine State Auctions With
The vendor show area at the Alex Lyon & SonFlorida auction is set up and ready for visitorswhen the sale gets under way.
Drawing quite a crowd, a 1965 Chieftain combatmilitary tank was a highlight of the sale.
Enjoying the Florida sunshine and the 20th annualAlex Lyon & Son Kissimmee auction are John Robinetteof Robinette Demolition; Rolf Helland, president ofIllinois Truck & Equipment; and Joe Ledue of IllinoisTruck & Equipment.
This 1965 Chieftain combat military tank (a British model tank), which saw action in the Falklands war, is stillfully operational, with the exception of the gun. George Maranuk of Western Reserve Trading, Youngstown,Ohio, who was buying for Jerry Alexander of Alexander Equipment Rental, Bourbonnais, Ill., had the top bid. “Ihave a few other military items and I just always wanted a tank,” Alexander said, who plans to keep it indoorsat his equipment rental business facility and move it outside in nice weather. Having Interstate frontage on I-57,Alexander feels this machine will definitely draw attention to his aerial lifts when he parks it beside them nearthe interstate.
Bill Rollinger Jr. of M. Adams Equipment Co.keeps track of the skid steers.
Alex Lyon & Son once again kicked off the FloridaAuctions with a nine-day sale in Kissimmee, Fla.
This year marked Alex Lyon & Son’s 20th annualSunshine State auction. A wide variety of equipment went onthe block from Feb. 2 through Feb. 10, with each day featur-ing more than 1,000 lots of equipment.
see LYON page 88
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 87
Terry North (L), used equipment manager,Patten CAT, and Dan Beaver, Catmandu Inc.,head out to see what the excavators weregoing for at the Alex Lyon & Son auction.
(L-R): Mark Pentz of Calvin Group Inc.; Dana Berger of H.O. Penn; Harry Hurley of BlanchardMachinery; and John Alexander of Alban CAT compare notes on what they think the iron will bringat the annual sale.
(L-R): Discussing what the cranes might go for atthe auction are Dozier Cook of Dozier Crane, BobBrooks of F&M Mafco, and Mike Pearl of EquipmentMart of NY.
Jack Lyon (L), president of Alex Lyon & Son, scansthe crowd for more bids while auctioneer MikePowers keeps the auction action moving.
One of Jack Lyon’s biggest consigners, Robert Mashburn (C) ofMashburn, Equipment, Ringgold, Ga., gets to spend some grandpatime with his grandsons, Corbin (L) and Caden at the sale site.
Driving around the auction in their Kubota RTV1100, JoePanebianco (L) of Mid Country Exchange, Syracuse, N.Y., and fel-low Mid Country Machinery, Fort Dodge, Iowa, business partnerBud Pecoy check out all the equipment at the Alex Lyon & Son auc-tion.
Each Day Featuring More Than 1,000 Lots of Equipment
Page 88 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Alex Lyon & Son Leads Off FloridaAuctions With Its 20th Annual Sale
Talking about JJ Scheckel’s new parts and supply com-pany — Service Supply America of Bellevue, Iowa — isBen Suiter, sales support, Service Supply America.
The funniest man from Remus, Mich., Tom Shaw of ShawEquipment Co. made his much anticipated return to the annualauction. Here, he picks up his copy of Construction equipmentGuide’s annual Florida auction issue.
Mark Mahnen of Wyoming MachineryCompany made the trip from Caspar, Wyo.,for the sale.
(L-R): If you bought a machine and needed a trailer, JohnnyGomez, Randy Hall, and Jim Berryman of Eager Beaver Trailershad a trailer to meet just about any need.
(L-R): Showcasing several machines that are now made in America, Marooka America’sRaul Valbuena (L) discusses machine transport logistics with Viviana Wiesner Villamizarof Embassy Freight, Bogota, Colombia and Gardenia Cantos of Trade & Traffic, Miami, Fla.
Craig Ferguson (L), owner, and his son, Cole Ferguson, sales specialist andpart owner, both of Ferguson Truck & Trailer, Dover, Wis., are looking toadd many pieces of equipment, such as this Lull telehandler, to their fleet.
LYON from page 87
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 89D
EN
NIS
MA
NA
RC
HY
©
2004 U
NC
F A
LL
RIG
HTS
RE
SE
RV
ED
We are born with limitless potential. Help us make sure that we all have the chance to achieve. Please visit uncf.org or call 1-800-332-8623.
Give to the United Negro College Fund.
®
jobs, 10 percent) added the most jobs.Other areas adding a large number of jobsincluded Dallas-Plano-Irving, Texas (8,300jobs, 8 percent); Seattle-Bellevue-Everett,Wash. (7,800 jobs, 12 percent); Boston-Cambridge-Quincy, Mass. (5,900 jobs, 12percent) and Los Angeles-Long Beach-Glendale, Calif. (5,700 jobs, 5 percent).The largest job losses were in Atlanta-
Sandy Springs-Marietta, Ga. (minus 4,900jobs, minus 5 percent); followed byPortland-Vancouver-Hillsboro, Ore.-Wash.(minus 3,600 jobs, minus 7 percent); Tampa-St. Petersburg-Clearwater, Fla. (minus 3,500jobs, minus 7 percent) and Northern Virginia(minus 3,200 jobs, minus 5 percent).Jackson, Miss. (minus 20 percent, minus2,000 jobs) lost the highest percentage.Other areas experiencing large percentagedeclines in construction employment includ-ed Columbus, Ind. (minus 19 percent, minus
300 jobs); Springfield, Mass.-Conn. (minus18 percent, minus 1,400 jobs) and Danville,Ill. (minus 13 percent, minus 100 jobs).Association officials noted that construc-
tion employment is benefitting from grow-ing demand for construction, driven primari-ly by the private sector. They added that therebounding housing market and relativelystrong demand for health care, energy andhigher education facilities boosted construc-tion spending levels by more than 7 percentfor the year through November. But theycautioned that construction spending wasstill more than $300 billion below peak lev-els amid declining public sector activity andweaker demand for office, retail and lodging.“Contractors in some areas appear confi-
dent enough about market conditions tobegin adding staff,” said Stephen E.Sandherr, the association’s chief executiveofficer. “The question is whether private sec-tor demand will continue to grow in 2013 orstall as it has done in prior years.”
Private Sector Driving Increasein Construction Employment
EMPLOYMENT from page 1
www.ConstructionEquipmentGuide.com
www.lyonauction.com corporate offices: Bridgeport, NYPhone: (315) 633-2944 • Fax: (315) 633-5635
www.lyonauctionlive.com
Sales Managers & Auctioneers, Inc.
WEDS., MARCH 13 @ 9:30 AM
ALEX
LYON& SON
EARLY HILITES INCLUDE: HOUSE MOVING EQUIPMENT: Graco Reactor Plural E20 Component ProPortioner,Jahns H13U94BR Structure Jacking System, Jahns Structure Jacking System, (4) Callahan HDR 2 axle Movers 28in. tall x64in. wide, (2) 2 axle Movers 88in. wide x 36in. tall, (2) 2 axle Movers 74in. wide x 44in. tall, (2) 2 axle Movers 70in. widex 38in. tall, 2 axle Mover 66in. x 40in. Tall, (34) 20 ton Bottle Jacks (9in. – 12in. tall), (7) 25 ton Hydr. Rams, (7) 25 tonHydr. Rams (13in. 3 1/2in. round), (12) 15 ton manual Lip Jacks, (47) Twist Jacks for I Beams, (9) Rite Brans TS2000 TrailerStand, (6) Hydr. Lip jacks (32in.), (15) 25in. Hydr Jacks, (2) 16in. Hydr, Jacks, 4ft x4ft. Box of Hydr. hoses & fittings forJahns Hacking System, Hydr. Power packs for Jahns Structure Jacking Systems, (15) Lock Collars for 10in. x 15in.m (19)Heavy Duty Machinery Skates Dollys 5in. 10in., (24) Shonng 7ft. Posts, (6) Hydr. Beam Jacks, (20) Cable Hook & Blocks,(4) 50 ton Hydr. Bottle jacks, (11) 20 ton Hydr. Bottle Jacks, Wood Cribbing (Bundles): (85) Bundles 6x8xft.bundles of 30,(21) Bundles 8x8x6ft. bundles of 20, (16) Bundles 5x6x 2ft. bundles of 98, (27) Bundles 5x6x4ft. bundles of 49, (26) Bundles5x6x 6ft. bundles of 49, (3) Pallets of 30 (6x8x6), SUPPORT BEAMS: 6x61/4 X 20ft., 61/2 x8 x 16ft. 49in., 6 x6 1/2 x17ft. 6in., 8x8x5ft.9in., 8x8 x 6ft. 1in., 8x8 x 5ft. 8in., 8x8 x10ft. 7in., 8x8 x 19ft., 8 x8 x 19.5ft., 8x8 x 22ft., 8x8x22ft. 9in.,8x8 x 25ft., 8x8x 27ft. 4in., 8x8 x 26ft. 10in., (2) 8x8x 26ft. 8in., 8x8 x 20ft., (24) 8x8x 30ft., (4) 8x8x 40ft. 3in., 8x81/2 x40ft., 8x8x 42ft. 4in., 8x81/2 x 42ft. 11in., 8 x9 x 40ft. 5in., 8x9 x43ft. 10in., 81/2 x 9 x 43ft. 9in., (2) 8x 24in. x 20ft. 5in.,(2) 10x11 x 50ft. 2in., (2) 10x13 x 50ft. 2in., 10 ¼ x 11 1/2 x 31ft. 3in., 101/4 x 11 ½ x 37ft., 10 1/4 x 11 ½ x 38ft., 10 ¼ x11 ½ x 39ft., 10 ¼ x 11 ½ x 41ft. 10in., 10 ¼ x 11 ½ x 41ft., 10 x 10 x 32ft., 10x14 x 29ft. 4in., 12 x 12 x49ft., (2) 12x12x 65ft., (2) 12x12/12 x 30ft., (2) 12x 123/4in x 60ft., (2) 12 x 13 x 4ft. 9in., 12 x 13 x 36ft. 4in., (2) 12x13 x 38ft., 12 x 13x 39ft. 2in., (3) 12 x 13 x 40ft., (9) 12x13 x 40ft. 2in., (4) 12x13 x40ft. 3in., (6) 12x13 x 40ft. 4in., (8) 12x13 x 40ft. 6in.,12x13 x 42ft., 12x13 x 43ft., 12x13 x 44ft. 8in., 12x13 x 45ft. 4in., 12x13 x 49ft. 3in., 12 x 13 x 50ft.2in., 12x13 x 50ft. 3in.,(3) 12x13 ½ x 24ft. 8in., (2) 12x13 ½ x 32ft. 8in., (2) 12x13 ½ x 39ft., (2) 12x 13 ½ x 40ft. 2in., 12 x13 x 17ft., 14 ½ x 14¼ x 15ft., (2) 14 1./2 x 14 ½ x 34ft., 14 ¾ x 14 ¼ x 29ft., (2) 14 ½ x 14 ¼ x 34ft. 4in., (3) 14 1/2 x 14 ¼ x 35ft., 14 ½ x 14½ x 45ft., 14 ¾ x 14 x 20ft., (2) 14 ¾ x 15 x25 ft. 8in., 15 ¾ x 15 ½ x 46ft. 3in., 15 ¾ x 16 ½ x 20ft., 15 ½ x 14 ¾ x 60ft.5in., (2) 16x16 x 38ft., (2) 16x16 x 41ft., (3) 16x16 X 50FT., 16x16 x 41ft., (2) 16x16 x52ft. 8in., 16x16 x 50ft., 16 x16 x52ft. 10in., 4x4 x 17ft. 8in., 6x6 x 14ft. 8in., 6x6 x 16ft. 6in., (13) 8x8x5 1/2in. (top & bottom thickness) x 3/8in. (web thick),(3) 6x6x 13ft. 9in. 3/8-3/8, (16) 2x6x16ft. 3/16in. thick, REGULAR I BEAMS; (2) 15 ½ x 15 x 25ft., 15x16 x 53ft.9in., IBEAMS WELDED TOGETHER: 2-10 ¼ x17 x 39ft. 4in., (3) 2-10 ¼ x 17 x 40ft. 6in., (2) 2-10 ¼ x 22 x 35ft. 6in., (2) 2-12 ½ x 22 x 40ft., (2) 2-121/2 x 22 x 70ft., TUBE: (2) 7x 7 x 20ft., 12 x 21 x 39ft., (22) 4x6x4ft. 1/8in wall, (3) 4x4x4ft.1/4in. Wall, (8) 4x4x1/2in. Angle (steal) 17ft. long, METAL MACHINING EQUIPMENT: Goodway GW-1660 Eng.Lathe, Industrial Grinder on Stand, Electric over Hydr. Press, Bridgeport Metal Lathe, Cincinnati Bick Ford Super ServideDrill Press Lathe, Mubea Muhc & Bender Metal Shear BF10, Cincinnati Drill Press Miller, Industry Grinder, Crate ofMilling Bits for Said Machines, CONCRETE BLOCKS: (2) Pallets of (70) 7 ½ in. x 3 ½ in. x 15 ½ in., STEEL RACKS:(4) 2 piece racks 7ft. x 9ft., 12x10 I Beams for base 8x8 for shelves, HYDRAULIC EXCAVATORS: Komatsu PC200LC-6L, 2 CRAWLER LOADERS: Case 455C long track, Case 450D, SKID STEER: Takeuchi TL150, 2 TELESCOPICFORKLIFTS: IR VR90B, IR VR90, 3 FORKLIFTS: Cat GC25K, Komatsu FG355T-6, Baker 10ft., 2 BOOM LIFTS:JLG 40ft., Condor 60N, LIGHT PLANT: Magnum MLT3060MM, WELDER: Miller Bobcat 225, 2 TRUCK TRAC-TORS: 1998 Mack CH13, 1989 Mack CH613, 2 PICKUPS: 2003 Ford F350 (4x40, Int’l. KB-3, FLATBED TRAILER:1990 Great Dane 45ft., DETACHABLE TRAILER: TrailKing TK50MG-482 48ft., 2 GOOSENECK TRAILERS: TexasBragg EC28TDB-N20 28ft., 20ft. (t/a), UTILITY TRAILER: 80in.x 16ft. Bobcat Trailer, TAG AXLE FOR SEMITRAILER: Pin-on, CAR TRAILER: Demco 82in. x 14ft., ATTACHMENTS: 42in. Quick-Tach, 12in. Auger Bits, 84in.- 80in. Tooth bucket, 48in. Bradco Forks, Stanley MB356 Breaker, Bobcat 10 Hydr. Auger, Lowe 30in. Trencher, SUPPORTEQUIPMENT: Power Boss Ride-On Floor Scrubber, LB White Box Heater, Tennant Ride On Sweeper, Stihl T5420 StickySaws, Hilti Chipping Hammer, Paslode impulse Cordless Framing Nailer, Box Of C Clamps, Hand Tools: (2) 4in. DewaltElectric Grinders, Milwaukee Grinder, (2) Milwaukee Sawzalls, Bocsh Skill Saw, Banding Cart, (13) Hanging Lights,PortableWheel Weighter System, (9) 2 ton cable Come-A-Longs, (15) 2 ton Chain Come-A-Longs, Remington Space Heater,Excell Pressure Washer, JD C536LE Chainsaw, Poulan Chain Saw, Honda EN2500 Generator, (3) 3x3 11ft. tube, (50) 1in.Threaded Rebar, (30) 3/4in. Ready Rod, (3) 1in. Threaded rebar 12in., (7) 3/8-5/16 Ratchet Binders, Hammer Drill Bits, CoreDrill Bits, Quantity of Log and Lifting Chains, (45) Fire Extinguishers, Partner Ring Saw, ICS Concrete Chain Saw, DewaltPressure Washer, (10) Hydr. Valves.
Address: 1000 N 12th Ave., Washington, IA 52353
DIRECTIONS: From Iowa City Municipal Airport: North toward S Riverside Dr. .2 miles, right on S Riverside Dr. .3 miles. Continue onto Oak Crest Hill Rd. SE 1.5 mles. Keep left at fork, follow signs for US-218 S. IA-27S and
merge onto IA-27 S/US-218S 19.3 miles. Take exit toward 220th St./ Co. Rd. G35 .3 miles. Turn Right onto 220th St./Co. Rd, G36 6.4 miles., left on Riverside Rd. 2 miles.
Continue on N 12th Ave. Site will be on left.
AUCTION
COMPLETE LIQUIDATION OFJEREMY PATTERSON HOUSE MOVING
A FULL ARRAY OF ALL TYPES OF BIG EQUIPMENT & SUPPORT EQUIPMENT.
IOWA CITY,IOWA
Col. Raymond S. Henry - WI Lic. # 2490-52; MN Lic. # 05-12-11Real Estate Auctioneer & GPPA Certified Equipment Appraiser
Accepting Excavators, Dozers, Loaders,Semis, Trucks,
Trailers and Related Equipment!
Jct MN Hwy 95 & 25 Foley, MNAccepting Consignments until Noon Sat, March 2
Auction Includes +/- 25 Acres of Prime Farmland and Hunting Ground
'96 Int'l 4900 Extenda Cab Digger Derrick102k Miles, DT466 Engine
210 Hp, EF 5x2 Trans Altec 11' Body, 2 Section Boom
Single Basket, 2 Sp Auger Pole Clamp Winch, 4 Outriggers
For More Information Visit www.iraymn.com
This and Many More Excellent Pieces of EquipmentAvailable at our Big Spring Auction!
Page 90 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
New and Improved...
VIPAR Launches Web Siteto Better Serve DistributorsVIPAR Heavy Duty has launched its new
and improved Web site, www.vipar.com,with enhanced navigation functions andexpanded contents to better serve its distrib-utors, suppliers and end-users. Built on arobust technology platform, the site rein-forces the VIPAR Heavy Duty brand andincludes improvements to both the publicand private sides of the site.“The newly enhanced Web site reinforces
our VIPAR Heavy Duty brand as well asprovides increased exposure for both ourstockholders and supplier partners,” said JeffPaul, director of marketing. “Additionally,we have made major technical improve-ments to the Web site that offer optimal func-tionality and a user-friendly atmosphere forall of our constituent groups both internallyand externally.”VIPAR Heavy Duty’s new Web site is
centered on the theme, “It’s Our Duty,” andfocuses on key qualities that the organization
and its distributors bring to its end-user cus-tomers. They include years of experienceand expertise, world-class service, thestrength of the organization’s vast network,and product quality through industry-leadingbrands.The public side of the Web site is designed
to serve the industry as a whole. Among thechanges is a greatly improved “Find-A-Distributor” function, making it easier forfleet managers and owner operators to findthe nearest VIPAR Heavy Duty distributor. The private portal of the website for the
organization’s distributors and supplier part-ners provides enhanced functionality, navi-gation, and improvements to resourcesincluding the graphics gallery, enhanced linecard and product search functionality.For more information on VIPAR Heavy
Duty, visit www.vipar.com or e-mail:[email protected].
Cat RM500 Reclaimer 1 of 2 Cat D10N Dozer Crawlers
1 of 15 John Deere 9630 Tractors
1 of 22 Cat 740 Articulated Dumps
1 of 4 Cat 621G Motor Scrapers
1 of 14 Cat D8T Dozer Crawlers
Kenworth T800 Truck Tractor
1 of 10 Cat 14M Motor Graders
Premium Single-Owner Equipment Formerly of T.J. Lambrecht Construction›› VIEW COMPLETE INVENTORY AT ‹‹www.proxibid.com/gordonbrothers
1 of 11 Cat D6T Dozer Crawlers
rsal of morMajor dispersal of morepre ly oviously owned by T
emium Single-Owner Equipment FPr
r
101 HunToll FToll F
ore than $40M in well maintained cwned by T.J. Lambrecht Construction no
emium Single-Owner Equipment F
ained c
101 Huntingt Avon Avenue, 10th F r, Bloor, Boston, Moll Free 1-888-424-1903
onstruction equipment and ctruction now off e ered for sale by Gordon Br
.J. LambrTormerly of emium Single-Owner Equipment F
truction equipment and c
on, MA 02199
ommercial vehiclesdon Brother roup.s Group
echt Construction.J. Lambr
om/gorxibid.cowww.pr COMPLETEVIEW››
echt Construction
sothersdonbrom/gor‹‹T A ATORYENTV IN COMPLETE
repre ly oviously owned by T
wned by T.J. Lambrecht Construction no
truction now off e ered for sale by Gordon Br
don Brother roup.s Group.
l Rig
hts
Res
erve
d
powered by
Need assistance getting set up? C
e getting set up? Call Proxibid’s toll free cust
ee customer support line at 877-505-7770 or email us a
t 877-505-7770 or email us a fo@prt info@p
Cop
yrig
ht ©
201
3 P
roxi
bid
Inc.
All
R
TN FIRM #2048
FOR LIVE UPDATES VISIT: ritchasonauctioneers.com7538 LINWOOD ROAD | LEBANON, TN 37090 | 800.806.3395 | 615.444.5464
MARCH 201324TH ANNUAL SPRING AUCTION
Consign Now
HEAVY EQUIPMENT & TRUCKS | CONSTRUCTION | INDUSTRIAL | COMMERCIAL | FLEET
23RD
CONSIGNMENT DEADLINEMARCH 11TH, 2013
C R
g g
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 91
Page 92 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
LaHood to Leave; AnotherVacancy in Obama CabinetBy Ken ThomasASSOCIATED PRESS
WASHINGTON (AP) TransportationSecretary Ray LaHood, who lifted the pro-file of distracted driving as a national safetyconcern, is stepping down, presentingPresident Barack Obama with anotherCabinet vacancy at the start of his secondterm. The former congressman from Illinois
and one of only two Republicans whoserved in Obama’s Cabinet, LaHoodworked for more safety in the air and on theground and pushed for improvements ofroads and bridges. Under his watch, thedepartment demanded tougher fuel efficien-cy requirements for automakers and tooksteps to address airline pilot fatigue. Obama, who at one point served with
LaHood in the Illinois congressional delega-tion, said they were “drawn together by ashared belief that those of us in public serv-ice owe an allegiance not to party or faction,but to the people we were elected to repre-sent. And Ray has never wavered in thatbelief.’’ LaHood said in an interview with The
Associated Press that he told Obama a weekafter the November election that he neededto move on. But he also said he was still“conflicted’’ by his decision because heliked working for the president and consid-ered it the “best job I’ve ever had in publicservice.’’ He said he plans to remain at the depart-
ment until his successor is confirmed by theSenate, which he expects in about twomonths. The only other Republican whowas in Obama’s first-term Cabinet wasDefense Secretary Robert Gates, whostepped aside and was replaced byDemocrat Leon Panetta earlier. LaHood, who once considered likely to
run for governor in his home state, said hewould not seek public office and indicatedhe didn’t have any specific plans. “I have had a good run. I’m one of these
people who believe that you should go outwhile they’re applauding,’’ he said. LaHoodsaid he was content to watch from the side-lines as his oldest son, Darin, serves in theIllinois state senate. His move continues an exodus that will
give Obama’s team a new look in his secondterm. Secretary of State Hillary RodhamClinton, Panetta and Treasury SecretaryTimothy Geithner are departing and in addi-tion to LaHood, the heads of the Interior andLabor departments also have announcedtheir resignations. Obama has nominatedformer Nebraska Sen. Chuck Hagel, aRepublican, to serve as defense secretary tosucceed Panetta.
Possible replacements for LaHoodinclude Los Angeles Mayor AntonioVillaraigosa, who has pushed for increasedrail service in Los Angeles and served aschairman of last year’s Democratic NationalConvention, and Debbie Hersman, thechairman of the National TransportationSafety Board. The name of former Rep. JimOberstar of Minnesota, who led the HouseTransportation and InfrastructureCommittee, also has been mentioned. LaHood served seven terms in Congress
representing a central Illinois district thatincludes his hometown of Peoria, Ill., beforehe was chosen by Obama for the post. Hetraveled widely, visiting 49 states, 210 citiesand 18 countries promoting Obama’s agen-da. He made trips that allowed him to ridesome of the world’s fastest trains andinspect the latest vehicles at auto shows. In Washington, he would occasionally
don a bicycle helmet and pedal around theDistrict to promote bike lanes. At the start of the new administration,
LaHood spearheaded efforts to stimulate theeconomy through transportation construc-tion projects and promoted the administra-tion’s vision of a nation connected by high-speed trains. But the high-speed rail pro-gram, which was supposed to be one of thepresident’s signature projects, has been onlife-support since Republicans regainedcontrol of the House in the 2010 election. The department struggled with how to
pay for the repair and improvement of thenation’s aging transportation network andeventually reached a compromise withCongress last year on a more limited,scaled-back 2-year plan that gives statesmore flexibility in how they spend federalmoney. Perhaps LaHood’s most passionate
work involved distracted driving, whichhe called a “national epidemic.’’ Helaunched a national media campaign toend texting and cellphone use by drivers,an awareness campaign that drew compar-isons to efforts to promote seat belt usemore than a generation ago. He button-holed auto executives to help reduce driv-er distraction and would even yell at otherdrivers on occasion to put down their cell-phones. “Every time someone takes their focus
off the road — even if it’s just for amoment — they put their lives and thelives of others in danger,’’ he said in 2010. During his tenure he slapped Toyota
Motor Co. with record fines for delayingsafety recalls and failing to promptlyreport problems to federal regulators. Andhe recently ordered United Airlines toground its Boeing 787 Dreamliner follow-ing mishaps with the aircraft’s batteries.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 93
Page 94 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
AIM ATTACHMENTS..................................................................................68ALEX LYON & SON INC
IOWA CITY IA ..................................................................................89ALEX PARIS CONTRACTING CO INC ......................................................9ALLIED CONSTRUCTION PRODUCTS....................................................59ALTORFER CAT ........................................................................................26AMERICAN STATE EQUIPMENT ..............................................................11ARING EQUIPMENT CO INC....................................................................15BAIR PRODUCTS INC ..............................................................................73BARGAINS............................................................................................80,81BOBCAT CO ..............................................................................................42BOMAG AMERICA'S INC ..........................................................................37CAT AUCTION SERVICES
KANSAS CITY MO ..........................................................................91CEG SCALE MODELS ..............................................................................27CLASSIFIEDS ............................................................................................78CONSTRUCTION EQUIPMENT GUIDE
WANTED ..........................................................................................82AUCTION TRIPLE PLAY ..................................................................93IN PRINT OR WEB ..........................................................................79PAVING COMPACTION & MILLING PROMO ..................................40NEWSLETTERS ..............................................................................48
CUSTOM MADE PRODUCTS ..................................................................20DITCH WITCH............................................................................................45DYNAPAC ..................................................................................................31EFFICIENCY PRODUCTIONS INC ..........................................................26ERB EQUIPMENT......................................................................................12FABCO EQUIPMENT INC............................................................................7FINKBINER EQUIPMENT CO....................................................................11FLANGE LOCK ..........................................................................................25GEHL..........................................................................................................36GENSCO EQUIPMENT CO LTD ..............................................................68GOMACO CORP........................................................................................33H & L TOOTH CO ......................................................................................74H-E PARTS DISTRIBUTION ......................................................................47HITACHI ....................................................................................................60HOWELL TRACTOR & EQUIPMENT CO........................................47,77,96HULTDINS INC ..........................................................................................75HYUNDAI CONSTRUCTION EQUIPMENT ..............................................53ILLINOIS TRUCK & EQUIPMENT ..............................................................3INDEXATOR INC........................................................................................65IRAY AUCTION
FOLEY MN........................................................................................89IRON PLANET ..........................................................................................85JCB INC ....................................................................................................41
JFW EQUIPMENT INC ..............................................................................30
JJ SCHECKEL CORP ................................................................................20
JOB RENTALS AND SALES LLC ..............................................................22
JOHN DEERE ............................................................................................57
JOHN DEERE SKID STEER......................................................................49
KOMATSU AMERICA CORP ................................................................16,70
KUBOTA ....................................................................................................56
KUBOTA SVL ............................................................................................95
LEEBOY ....................................................................................................34
LIUGONG ..................................................................................................69
M ADAMS EQUIPMENT CO......................................................................13
MAULDIN PAVING PRODUCTS................................................................32
MCCANN INDUSTRIES INC ..................................................................6,75
MIDWEST VIBRO INC ..............................................................................45
MISSISSIPPI VALLEY EQUIP ..................................................................77
NATIONAL TRACTOR PARTS ..................................................................47
NITKE SALES INC ....................................................................................92
NORTRAX-MIDWEST................................................................................21
NPK CONSTRUCTION EQUIPMENT INC ................................................63
NUSS GROUP ............................................................................................8
OKADA AMERICA......................................................................................66
PATTEN TRACTOR & EQUIPMENT CO ....................................................2
PRO-TEC EQUIPMENT ............................................................................25
PROXIBID ..................................................................................................90
PURPLE WAVE INC ..................................................................................84
RDO EQUIPMENT CO ..............................................................................55
RITCHASON AUCTIONEERS
LEBANON TN ..................................................................................90
ROAD BUILDERS MACHINERY ............................................................6,19
ROLAND MACHINERY INC ........................................................................5
ROSCO ......................................................................................................38
RUDD EQUIPMENT ..................................................................................23
SOUTHEASTERN EQUIPMENT CO ........................................................22
STAR EQUIPMENT LTD ..............................................................................6
TAKEUCHI..................................................................................................66
THE GRAVELIZER ....................................................................................68
TITAN RENTS ............................................................................................20
TOKU AMERICA ........................................................................................73
VERMEER SALES & SERVICE ................................................................22
VOLVO COMPACTION ..............................................................................34
VOLVO CONSTRUCTION EQUIPMENT ..................................................61
WEST SIDE TRACTOR SALES ................................................................25
WIRTGEN AMERICA ................................................................................39
YANMAR AMERICA ..................................................................................64
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • February 16, 2013 • Page 95
www.kubota.comOptional equipment may be shown.
©Kubota Tractor Corporation, 2010
Now available with a pressurized comfort cab. Schedule your Kubota SVL Series demo today.
ARNOLD’S OF KIMBALLwww.arnoldsinc.com701 State Hwy 55 EKimball, MN 55353
320/398-3800Fax: 320/398-6900
ARNOLD’S OF MANKATOwww.arnoldsinc.com
1715 Howard DriveNo. Mankato, MN 56003
507/387-5515Fax: 507/387-6449
BURRIS EQUIPMENT CO.www.burrisequipment.com2216 N. Green Bay Rd.
Waukegan, IL 60087847/336-1205
Fax: 847/336-2697
27939 W. Concrete Dr.Ingleside, IL 60041
815/363-4100
10351 W. Laraway Rd.Frankfort, IL 60423
815/464-6650
WEINGARTZ SUPPLY [email protected]
39050 Grand River Ave.Farmington Hills, MI 48335
248/471-3050
6585 Dixie Hwy.Clarkston, MI 48346-3421
248/620-5258
46061 Van Dyke Ave.Utica, MI 48317586/731-7240
BIRKEY’S CONSTRUCTIONEQUIPMENT
1801 E. University Ave.Urbana, IL 61802800/798-1772
Fax: 217/337-1775
6140 Highway 10Anoka, MN 55303888/448-5266
3021 133rd St. SWShakopee, MN877/753-6100
23580 Mn-5Loretto, MN888/479-4342
NIEBUR TRACTOR &EQUIPMENT, INC.
www.nieburtractor.comHastings, MN888/839-6860
LANO EQUIPMENT INC.www.lanoequip.com HAUG-KUBOTA, LLC.
www.haugkubota.comEast Highway 123585E. Hwy 12
Willmar, MN 56201320/235-2717
Fax: 320/235-2771
Page 96 • February 16, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE