mid frame reproductionfor - dealers.fgm.uk.netdealers.fgm.uk.net/pdffiles/simplicity/1695994.pdf ·...
TRANSCRIPT
Parts Manual
Mid FrameDual Stage Snowthrower
Mfg. No. DescriptionAttachment
1695994 (I924EX), 9TP 24" Snowthrower (CE/Export)
Revision -Manual Part No. 1753335
Rev. Date: 7/20/2011
Not for
Reprod
uctio
n
Table Of Contents
Torque Specification Chart ..................................................................... Inside Back Cover
PRODUCT COMPONENTS PAGESHandles & Controls Group ................................................................................................................................... 4Engine & Frame Group - 9TP .............................................................................................................................. 8Auger Drive Group ............................................................................................................................................... 12Auger Housing Group .......................................................................................................................................... 14Traction Drive Group - Standard .......................................................................................................................... 16Wheels & Tires Group .......................................................................................................................................... 18Decals Group ....................................................................................................................................................... 20Chute & Rotation Group - Left Side Crank .......................................................................................................... 22Gear Case Assembly ........................................................................................................................................... 26
Not for
Reprod
uctio
n
Handles & Controls GroupNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
989416
The above parts group applies to the following Mfg. Nos.:
42011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
PART NO. DESCRIPTIONREF NO QTY.
Handles & Controls Group
Footnotes
HEADLIGHT ASSEMBLY, Oval 0010 1737965 1BULB, 881-12V 27W Halogen Lamp (Included with Ref. No. 0010) 0010-10 ----- 1COVER, Panel (Domestic) 0020 1736536C 1COVER, Panel (CE/Export) 0020 1737498C 1SCREW, Truss Head Torx, 1/4-20 x 3/4 0030 1960715 3CABLE AND SPRING ASSEMBLY, Auger Drive, R.H. 0040 1732471 1HANDLE, Lower 0050 1737759A 1HANDLE, Upper, R.H. 0060 1734587A 1HANDLE, Upper, L.H. 0070 1734586A 1CAPSCREW, Hex Head, 5/16-18 x 1, G5 0080 1921333 1CAPSCREW, Hex Head, 5/16-18 x 1-1/4, G5 0081 1921977 1CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 3/4 0090 1664847 1CAPSCREW, Hex Washer Head, 5/16-18 x 1 0091 1960373 1NUT, Hex Flange, Two Way Lock, 5/16-18 0100 1935048 2KNOB, Wing, 5/16-18 0110 7035744 4WASHER, Internal Tooth, 5/16 0115 7090391 4BOLT, Carriage, 5/16-18 x 2-1/4, G5 0120 1960273 4NUT, Hex Lock, 1/4-20, ESNA Light 0140 1920397 4SPACER, 1/4 ID x 3/8 OD x 5/16 0150 1678392 2CAPSCREW, Hex Head, 1/4-20 x 1-3/4, G5 0160 1921962 4LEVER, Clutch, R.H. 0170 1739783A 1LEVER, Clutch, L.H. 0180 1739782A 1BRACKET, Pivot, Free Hand 0190 1733505A 1ROD, 5-5/8 0200 1736360 1SPACER, 1/4 ID x 3/8 OD x 1/8 0210 1733095 1WASHER, 1/4 0220 1960353 1SPACER, Stepped 0230 1736542 2BOLT, Shoulder, Hex Washer Head, 10-24 0240 1750554 2NUT, Hex Lock, Nylon Insert, 10-24 0250 1933896 2GRIP 0260 1726317 2NUT, Hex, 5/16-24 0270 2820263 1BALLJOINT 0290 724360 1ROD, Speed Control 0300 1751543 1CAPSCREW, Hex Head, 3/8-16 x 2, G5 (Use Qty. 2 on Domestic Models) 0310 1923701 1NUT, Hex Flange, Whiz Lock, 5/16-18 0320 1931277 3SPRING (Use Qty. 2 on Domestic Models) 0330 724361 1WASHER, 3/8 (Use Qty. 2 on Domestic Models) 0340 1918266 1NUT, Hex Lock, 3/8-16, ESNA Light (Use Qty. 2 on Domestic Models) 0350 1919439 1ROD, Chute (Domestic) 0360 1732427 1KNOB, Threaded, 3/8 (Domestic) 0370 1732470 1SPACER, 5/8OD x 3/8ID x 1/4 (Domestic) 0380 7014527 1BRACKET, Controls 0390 1737684 1SCREW, Round Head Phillips, #10-24 x 3/4 0400 1960589 1KNOB, Slot Speed 0410 1733192 1
Note* See your local hardware store for replacement bulbs
The above parts group applies to the following Mfg. Nos.:
52011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
Not for
Reprod
uctio
n
Handles & Controls GroupNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
989416
The above parts group applies to the following Mfg. Nos.:
62011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
PART NO. DESCRIPTIONREF NO QTY.
Handles & Controls Group
Footnotes
NUT, Hex Lock, 10-24 0420 1933896 1LEVER, Speed 0430 1736836 1CABLE, Front Drive 0440 727331 1BOOT, Spring End Cover 0450 723154 1BRACKET, Cable Adjusting 0460 723259 1ROD & SPRING ASSEMBLY 0470 1733509 1SPRING, Compression 0480 2108360 2CAPSCREW, Hex Washer Head, Taptite, 1/4-20 x 5/8 0490 1927429 2BOLT, Carriage, 5/16-18 x 3/4 0500 723873 3SUPPORT, Dash 0510 1732064A 1TIE, Cable 0520 2825094 5HARNESS, Wiring 0570 1737446 1WASHER, Flat 0600 725331 2BUSHING 0610 1667588 1
Note* See your local hardware store for replacement bulbs
The above parts group applies to the following Mfg. Nos.:
72011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
Not for
Reprod
uctio
n
Engine & Frame Group - 9TPNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
2989071
The above parts group applies to the following Mfg. Nos.:
82011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
PART NO. DESCRIPTIONREF NO QTY.
Engine & Frame Group - 9TP
Footnotes
* ENGINE, 9TP Briggs & Stratton (Engine Model: 12D114-0150-E8) (CE/Export Models Only)
0010 12D114-0150-E8 1
GUARD, Muffler, Plate 0010-10 797003 1GUARD, Muffler, Cage (Export) 0010-10 793193 1CAPSCREW, Hex Washer Head, Muffler Guard 0010-20 699854 3CAP, Fuel 0010-30 795027 1CORD, 10FT, 110V (Domestic Models Only) 0020 724865 1BOLT, Carriage, 5/16-18 x 1-1/2 0050 720064 4NUT, Push, For 1/4 Stud 0060 720376 4NUT, Hex Flange, ESNA, 5/16-18 0070 1739305 4PULLEY 0090 722085 1WASHER, 5/16 0100 1919381 3CAPSCREW, Hex Head, 5/16-24 x 1-1/4, G5 0110 1921982 1V-BELT, Drive, 3L 33.13 0120 1733324 1V-BELT, Auger, 4L, 38.10 0130 724801 1BELT GUIDE 0140 1739070 1LOCKWASHER, Spring, 5/16 0150 1917356 4CAPSCREW, Hex Head, 5/16-24 x 3/4, G5 0160 1921515 1BRACKET, Idler 0170 722090 1BUSHING, Idler Bracket 0180 722072 1SPRING, Extension, Idler 0190 722457 1IDLER, Plastic Ball Bearing 0200 722378 2NUT, Hex Center Lock Jam, 3/8-16 0210 1960251 2BOLT, Carriage, Short Neck, 3/8-16 x 1-1/4, G5 0220 724823 1AUGER IDLER 0230 722132 1SPACER, 1/2 ID x 1 OD x 1-3/4" 0240 722118 1WASHER, 1/2 0250 1960027 1ARM, Control 0260 1733451 1PIN, Hair 0270 725367 1PIN, Clevis 0280 1736381 1PANEL, Bottom 0290 1740906BM 1CAPSCREW, Hex Washer Head, Taptite, 1/4-20 x 5/8 0300 1927429 12SPRING, Extension, Auger 0310 722455 1FRAME 0320 1740572C 1PLATE, Engine Mount 0330 1733583C 1CAPSCREW, Hex Washer Head, 5/16-18 x 1/2 0340 722838 4CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 3/4 0350 1664847 6BELT COVER ASSEMBLY 0360 1733923 1SCREW, Hex Washer Head, Tapping, SEMS, 1/4 x 3/4 0370 722887 2WATER SHIELD ASSEMBLY (Includes Ref. No. 0390-10) 0390 1750241 1SEAL, Foam 0390-10 1733898 1SEAL, Strip 0400 1750172 1CAPSCREW, Hex, 5/16-24 x 1 0410 725996 2PIN, Cotter, Self Lock, 1/4 0420 7023590 1WASHER, Flat, 3/8 0500 7091528 1
Note* See your local Briggs & Strattion Distributor for Parts & Service.
The above parts group applies to the following Mfg. Nos.:
92011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
Not for
Reprod
uctio
n
Engine & Frame Group - 9TPNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
2989071
The above parts group applies to the following Mfg. Nos.:
102011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
PART NO. DESCRIPTIONREF NO QTY.
Engine & Frame Group - 9TP
Footnotes
SEAL, Engine Plate 0510 1750135 1CAP, Fuel 0520 792647 1
Note* See your local Briggs & Strattion Distributor for Parts & Service.
The above parts group applies to the following Mfg. Nos.:
112011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
Not for
Reprod
uctio
n
Auger Drive GroupNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
2989660
The above parts group applies to the following Mfg. Nos.:
122011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
PART NO. DESCRIPTIONREF NO QTY.
Auger Drive Group
Footnotes
GEAR CASE ASSEMBLY 0070 1753072 1KEY, Square, 3/16 x 3/4 0080 722726 1IMPELLER 0090 1739094A 1HUB, Impeller 0100 1739073 1SCREW, Hex Washer Head, 5/16-18 x 5/8 0110 1930601 3SET SCREW, Socket Head, 5/16-18 x 1/2 0130 7090848 3PULLEY 0150 722128 1CAPSCREW, Hex Head, 1/4-20 x 1-3/4, G2 0160 726061 2NUT, Hex Centerlock, 1/4-20 0170 725429 2SPACER, Sleeve, 1/4 x 1/2 0190 723913 2AUGER, LH, 24" 0220 1738299A 1AUGER, RH, 24" 0230 1738300A 1FITTING, Grease 0220-40 721620 2KIT, Shear Bolt -- 722130 1
The above parts group applies to the following Mfg. Nos.:
132011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
Not for
Reprod
uctio
n
Auger Housing GroupNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
2988669
The above parts group applies to the following Mfg. Nos.:
142011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
PART NO. DESCRIPTIONREF NO QTY.
Auger Housing Group
Footnotes
AUGER HOUSING ASSEMBLY, 24" 0010 1738263C 1CLAMP, Retainer 0020 1736620 2SCREW, Truss Head Torx, #10-24 x 3/8 0030 1960569 2NUT, Nylock, 10 x 24 0040 722401 2BRUSH, Cleanout 0060 1736094 1BEARING, Auger Shaft 0070 724427 2CAPSCREW, Hex Head, 5/16-18 x 3/4 0080 722839 4BOLT, Carriage, 3/8-16 x 3/4, G5 0090 7091547 4NUT, Hex Flange, 3/8-16 0100 7091619 4NUT, Hex Flange, Serrated Lock, 5/16-18 0110 725273 7SHOE, Skid, Reversible 0150 1727854A 2BLADE, Scraper, 24" 0160 1738301A 1RETAINER, Ball Bearing 0170 724712 1BEARING, Ball 0180 1705897 1BOLT, Hex, 5/16-18 x 5/8 0190 720018 3PLUG, Panel 0200 725521 2BOLT, Carriage, 5/16-18 x 5/8, G5 0210 7090799 4
The above parts group applies to the following Mfg. Nos.:
152011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
Not for
Reprod
uctio
n
Traction Drive Group - StandardNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
988389
The above parts group applies to the following Mfg. Nos.:
162011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
PART NO. DESCRIPTIONREF NO QTY.
Traction Drive Group - Standard
Footnotes
CHAIN, Roller, 19" 0200 724613 1RETAINER & BUSHING ASSEMBLY 0210 723655 4WASHER, Flat, 1/2 0220 724619 5CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 1/2 0230 1924856 8CHAIN, Roller, 18" 0240 724627 1RETAINER, Ring, 7/16 0250 721910 5SPRING LINK 0260 722377 1SPRING, Extension 0300 1736469 3SPROCKET 0310 722081 1WASHER, 1/2 0320 1960027 2AXLE, Swing Plate 0330 722082 1AXLE, 23-1/8 Lg 0340 722211 1BOLT, Hex, 1/4-20 x 1-3/4, G8 0350 720220 1AXLE SPROCKET, 30T 0420 722080 1BEARING, Axle, D-Hole 0430 722091 2HEX SHAFT & SPROCKET ASSEMBLY 0440 722083 1HUB, Friction Wheel and Bearing 0450 1739282 1WHEEL, Friction 0460 722185 1CAPSCREW, Hex Head, 1/4-20 x 5/8, G5 0500 1921959 3NUT, Hex Keps, 1/4-20 0510 1928372 3RING, Retaining 0520 1733326 1NUT, Flange Lock, 3/8-24 0530 722391 1PLATE, Swinging 0540 722069 1SPACER, Friction Pulley 0550 722110 1FRICTION PULLEY ASSEMBLY 0560 722092 1SPEED SELECTOR 0600 722087 1BEARING, Flange, 1/2ID x 7/8OD 0610 724636 1NUT, Hex Lock, ESNA Light, 1/4-20 0620 1920397 2CAPSCREW, Hex Head, 1/4-20 x 1-1/2, G5 0630 1922837 1SPOOL CABLE, Auger Control 0640 724621 1BRACKET, Cable Spool 0650 722070 1CABLE, Front Lower Drive 0660 722095 1
The above parts group applies to the following Mfg. Nos.:
172011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
Not for
Reprod
uctio
n
Wheels & Tires GroupNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
2989661
The above parts group applies to the following Mfg. Nos.:
182011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
PART NO. DESCRIPTIONREF NO QTY.
Wheels & Tires Group
Footnotes
WHEEL & TIRE ASSEMBLY, 16 X 4.8, LH 0010 1739926 1WHEEL & TIRE ASSEMBLY, 16 X 4.8, RH 0020 1739927 1VALVE STEM & CAP 0010-20 2172353 2RING, Retaining, EXT, Self Lock, 3/4 0030 1657528 2WASHER, Flat, 3/4 0040 725394 2PIN, Klik 0080 725431 2
The above parts group applies to the following Mfg. Nos.:
192011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
Not for
Reprod
uctio
n
Decals GroupNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
989162
The above parts group applies to the following Mfg. Nos.:
202011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
PART NO. DESCRIPTIONREF NO QTY.
Decals Group
Footnotes
DECAL, Danger Chute, FR/ENG (Domestic Only) 0010 1737865 1DECAL, Chute Warning (CE/Export Only) 0010 1727207 1DECAL, Danger Foot, FR/ENG (Domestic Only) 0020 1737866 1DECAL, Danger Auger Icons (CE/Export Only) 0020 1737867 1DECAL, Auger Control Symbols 0030 1737869 1DECAL, Traction Control Symbols 0040 1737870 1DECAL, Dashboard, Operator's Controls (Domestic Only) 0050 1738616 1DECAL, Dashboard, Free Hand Operatation Panel (Domestic Only) 0050 1738365 1DECAL, Dashboard, Operator's Controls (CE/Export Only) 0050 1751581 1DECAL, Shift, 1, 2, 3, 4, 5, 6 0060 1751582 1DECAL, Model, I1224E (Domestic Only) 0070 1738584 1DECAL, Model, I924IE (Domestic Only) 0070 1750423 1DECAL, Model, 924IE (CE/Export Only) 0070 1735119 1DECAL, Simplicity Swoosh, Dash 0080 1733199 1
The above parts group applies to the following Mfg. Nos.:
212011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
Not for
Reprod
uctio
n
Chute & Rotation Group - Left Side CrankNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
988679
The above parts group applies to the following Mfg. Nos.:
222011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
PART NO. DESCRIPTIONREF NO QTY.
Chute & Rotation Group - Left Side Crank
Footnotes
CHUTE ASSEMBLY, Short 0010 1736380C 1RING, Outer Chute 0020-10 722138 1COLLAR, Chute Rotation 0020-20 722340 1BOLT, Carriage 0020-30 722899 3NUT, Nylock, 5/16-18 0020-40 725321 4WASHER, Flat 0020-50 725331 4RING, Inner Chute 0020-60 1741917 1BOLT, Carriage, 1/4-20 x 3/4 0030 720386 5NUT, Hex, Nylock, 1/4-20 0040 722400 5WINGNUT, 5/16-18 0050 7035744 1WASHER, Nylon, 3/8 0060 2860210 1BOLT, Carriage, 5/16-18 x 3/4, G5 0070 1931333 1ROD, Chute Control 0090 1715658 1BUSHING, 3/8 ID x 7/16 OD x 3/16 Lg 0100 1667588 1KNOB, Spinner, 3/8 ID, 2-3/16 OD x 2-1/2 Lg 0110 1714084 1PUSHNUT, 3/8 Dia. 0120 1960093 1YOKE TUBE ASSEMBLY, Chute 0130 1733611 1PIN, Hair, Chute Gear 0140 722139 2BLOCK, Universal Pivot 0150 724565 1PIN, Universal Joint, 3/8 x 1 0160 724564 1PIN, Clevis, 1/4D x 1-3/16 0170 724579 1PIN, Cotter, 5/8 x 1/2 0180 724605 1ROD & YOKE ASSEMBLY, Chute 0190 1736538 1SUPPORT, Chute Rod 0200 1736537A 1SPACER, Support, Chute Rod 0260 1733379A 1CAPSCREW, Hex Flange Head, 5/16-18 x 1-1/4, G5 0270 1921977 1CAPSCREW, Hex Washer, Taptite, 5/16-18 x 1 0280 1960373 1GUARD, Chute (CE/Export Only) 0290 1733475 1BRACKET, Chute Guard (CE/Export Only) 0300 1737683A 1GROMMET, Chute Guard Bracket (CE/Export Only) 0310 1738174 2PUSHNUT, 3/16 Dia. (CE/Export Only) 0320 1960140 2CAPSCREW, Hex Washer, Taptite, 1/4-20 x 1/2 (CE/Export Only) 0330 1925003 2ROD & YOKE ASSEMBLY 0340-10 722202 1SPRING, Compression 0340-20 722414 1WASHER, Flat, 3/8 0340-30 720164 1GEAR, 9T 0340-40 722073 1PIN, Hair, Chute Gear 0340-50 722139 1BRACKET, Chute Gear 0340-60 1740591A 1PIN, Cotter, 5/8 x 1/2 0340-70 724605 1YOKE TUBE ASSEMBLY 0340-80 722076 1PIN, Universal Joint, 3/8 x 1 0340-90 724564 1PIN, Clevis, 1/4D x 1-3/16 0340-10 724579 1BLOCK, Universal Pivot 0340-11 724565 1NUT, Nylock, 1/4-20 0350 5025391 4
The above parts group applies to the following Mfg. Nos.:
232011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
Not for
Reprod
uctio
n
Chute & Rotation Group - Left Side CrankNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
988679
The above parts group applies to the following Mfg. Nos.:
242011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
PART NO. DESCRIPTIONREF NO QTY.
Chute & Rotation Group - Left Side Crank
Footnotes
CAPSCREW, Hex-Flange Head, 1/4-20 x 3/4, G5 0360 1935450 4DECAL, Hinge 0370 1706085 2
The above parts group applies to the following Mfg. Nos.:
252011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
Not for
Reprod
uctio
n
Gear Case AssemblyNOTE: Unless noted otherwise, use the standard hardware torque specification chart.
1753072
The above parts group applies to the following Mfg. Nos.:
262011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
PART NO. DESCRIPTIONREF NO QTY.
Gear Case Assembly
Footnotes
CASE, Gear, RH 0300 725982 1CASE, Gear, LH 0301 725981 1CAPSCREW, Hex, 5/16-24 X 1 0303 725996 7NUT, Hex Flange, Serrated, 5/16-24 0304 725338 8CAPSCREW, Hex Head, 5/16-24 x 1-1/2 0305 723575 1PLUG, Pipe, 1/4-18 0306 724426 1SEAL, Oil 0310 725874 2BEARING, Sleeve, 1 x 1-1/4 x 1 0311 724424 2WASHER, Flat, 1 0312 724425 2SHAFT, Auger Out 0313 1739058 1GASKET 0314 725983 1GEAR, Worm 0315 1752500 1KEY, Woodruf 0316 725433 1RING, Quad 0320 724423 1BEARING, Flange, 3/4ID x 1-1/8 OD 0321 724729 1WASHER, Thrust 0322 724079 1BEARING, Roll Thrust, 3/4 ID x 1-1/4 OD 0323 724352 1WASHER, Thrust 0324 724079 1KEY, Hi-Pro 0326 724366 1WORMGEAR 0327 724421 1BEARING, Sleeve, 3/4 ID x 7/8 OD 0330 724420 1SHAFT, Impeller 0340 1751535 1RING, Retaining, 3/4" 0380 1752515 1
The above parts group applies to the following Mfg. Nos.:
272011
Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation
1695994 - (I924EX)
1753335
Not for
Reprod
uctio
n
Not for
Reprod
uctio
n
in/lbsft/lbs
3
Torque Specification ChartFOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%)
PropertyClass
Class 8.8 Class 10.9 Class 12.9
Size OfHardware Nm. Nm. Nm. Nm.
M3 1.282.905.75
9.916.5
244883
132200275390530375995
1350183023603050
13.44 1.804.108.10
14233467
117185285390550745960
14001900258033104290
19.2 22.92 2.15M4 30.72 43.44 52.56 4.95M5 60.96 5.97 7.15
16.59.7
M6 7.3 10.3 12.1M7 12.1 16.9 19.9 27M8 17.7 25 29 40M10 35 50 59 81M12 61 86.2 103 140M14 101 136 162 220M16 147 210 250 340M18 202 287 346 470M20 290 405 486 660M22 390 559 656 890M24 497 708 840 1140M27 733 1032 1239 1680M30 995 1401 1681 2280M33 1349 1902 2278 3090M36 1740 2441
37982935 3980
M39 2249 3163
Torque Specification ChartFOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
HardwareGrade
SAE Grade 2 SAE Grade 5 SAE Grade 8
Size Ofin/lbsft/lbs
in/lbsft/lbs
in/lbsft/lbs
in/lbs in/lbsHardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32 19 2.1 30 3.4 41 4.68-36 20 2.3 31 3.5 43 4.910-24 27 3.1 43 4.9 60 6.810-32 31 3.5 49 5.5 68 7.71/4-20 66 7.6 8 10.9 12 16.31/4-28 76 8.6 10 13.6 14 19.05/16-18 11 15.0 17 23.1 25 34.05/16-24 12 16.3 19 25.8 29 34.03/8-16 20 27.2 30 40.8 45 61.23/8-24 23 31.3 35 47.6 50 68.07/16-14 30 40.8 50 68.0 70 95.27/16-20 35 47.6 55 74.8 80 108.81/2-13 50 68.0 75 102.0 110 149.61/2-20 55 74.8 90 122.4 120 163.29/16-12 65 88.4 110 149.6 150 204.09/16-18 75 102.0 120 163.2 170 231.25/8-11 90 122.4 150 204.0 220 299.25/8-18 100 136 180 244.8 240 326.43/4-10 160 217.6 260 353.6 386 525.03/4-16 180 244.8 300 408.0 420 571.27/8-9 140 190.4 400 544.0 600 816.07/8-14 155 210.8 440 598.4 660 897.61-8 220 299.2 580 788.8 900 1,244.01-12 240 326.4 640 870.4 1,000 1,360.0
Hex Head Capscrew
Hex Nut
Lockwasher
Washer
Carriage Bolt
NOTES1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread formingscrews, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:a. for prevailing torque locknuts - use 65% of grade 5
torques.b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
Hardware Identification & Torque Specifications
Common Hardware Types
NoMarks
The guides and ruler furnished below are designed tohelp you select the appropriate hardware.
8.8 10.9 12.9
Class 5.6
5.6
5150
13.44 1.285.88
26.4 2.5044.64 4.3
5.2 7.17.7 10.515 21
988 1340759 1030590 800435 590320 435217 295169 230126 17189 12164 8842 5826 36
.56
ThreadDiameter (mm)
Screw, 1/2- 16 x 2
BodyDiameter
Diameter
InsideDiameter (in)
Nut, 1/2-16
01/4 3/41/2 21
1/4 3/41/2 1/4 3/41/2 1/4 3/41/2 4
90 10070 8050 6030 400 10 20
ThreadDiameter (mm)
Nut, M8 Screw, M8- 1.25 x 25
Distance between threads (mm)
BodyLength (in)
BodyLength (mm)
3/8” Bolt or NutWrench—9/16”
5/16” Bolt or NutWrench—1/2”
1/4” Bolt or NutWrench—7/16”
1/2” Bolt or NutWrench—3/4”
7/16” Bolt or NutWrench (Bolt)—5/8”Wrench (Nut)—11/16”
in/lbs
Threads per inch
Threads per inch
Body Length
Body
When a washer or nut is identified as 1/2” (M8), this is the Nominal size, meaning the inside diameter is 1/2 inch (8mm metric thread diameter); if a second number is presentit represents the threads per inch (distance between threads).
When bolt or capscrew is identified as 1/2 - 16 x 2” (M8 - 1.25 x 50 ),this means the Nominal size, or body diameter is 1/2 inch (8mmmetric thread diameter), the second number,16, represents the threads per inch, (1.25 thread diameter). The final number is the body length of the bolt or screw, 2 inches (50mm).
Standard Hardware Sizing
M6 Bolt or NutWrench—10mm
M8 Bolt or NutWrench—13mm
M10 Bolt or NutWrench—17mm
M12 Bolt or NutWrench—19mm
M14 Bolt or NutWrench—22 mm
Wrench & Fastener Size Guide
Not for
Reprod
uctio
n
3515 N. 124 Street / PO Box 702Wauwatosa, WI 53222 USA
www.simplicitymfg.com
2011Milwaukee, WI, USA. All rights reserved
Briggs & Stratton Yard Power Products Group
© Copyright by Briggs & Stratton Corporation
IT IS THE POLICY OF BRIGGS & STRATTON CORP. TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY
OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS.