ΤΕCHNOLOGICAL EDUCATIONAL INSTITUTE

(T.Ε.Ι.) OF ATHENS FACULTY OF HEALTH AND

CARING PROFESSIONS.DEPARTMENT OF DENTAL

TECHNOLOGY

DIPLOMA SUPPLEMENTThis Diploma Supplement model was developed by the European Commission, Council of Europe and UNESCO/CEPES. The purpose of the supplement is to provide sufficient independent data to improve the international ‘transparency’ and fair academic and professional recognition of qualifications (diplomas, degrees, certificates etc.). It is designed to provide a description of the nature, level, context, content and status of the studies that were pursued and successfully completed by the individual named on theoriginal qualification to which this supplement is appended. It should be free from any value judgments, equivalence statements or suggestions about recognition. Information in all eight sections should beprovided. Where information is not provided, an explanation should give the reason why.

1. INFORMATION IDENTIFYING THE HOLDER OF THE QUALIFICATION

1.1 Family name(s):1.2 Given name(s):1.3 Date of birth (day/month/year):1.3.1 Place of birth:1.3.2 Country:1.4 Student identification code or number (if available):

2. INFORMATION IDENTIFYING THE QUALIFICATION

2.1 Name of qualification and (if applicable) title conferred (in original language):Ptychio (Degree)

2.2 Main field(s) of study for the qualification:Dental Technology……………………………………….……

2.3 Name and status of awarding institution (in original language):Technologiko Ekpedeutiko Idrima (T.E.I.) Athens, a state institution of HigherEducation

2.4 Name and status of institution (if different from 2.3) administering studies (in original language):As above.

2.5 Language(s) of instruction/examination:Greek

Family name(s): …………………………………………………………………….Student identification code or number: …………………………………………..

3. INFORMATION ON THE LEVEL OF THE QUALIFICATION

3.1 Level of qualification:Undergraduate (240 ECTS)

3.2 Official length of programme:Duration in years: 4 years (8 semesters) Teaching Weeks per semester: 13 (thirteen)ECTS Course Credits: 240Workload (WL): 6645 hours (27.68 hours WL per unit ECTS)Training Placement: 6 months practical exercise (obligatory at the 8th semester of studies)

3.3 Access requirements:Certificate of Upper Secondary Education (Lyceum) and (Panhellenic) entrance examinations.

4. INFORMATION ON THE CONTENTS AND RESULTS GAINED

4.1 Mode of study:Full-time

4.2 Programme requirements:Students receive their degree when:

(i) they have successfully completed their compulsory courses, mandatory electives, as well as any optional courses of the undergraduate curriculum;

(ii) their graduation project (dissertation) has been successfully approved completed and examined;

(iii) they have successfully completed their Industrial Placement (practical training); (iv) they have completed four (4) academic years of study, and have accumulated

240 ECTS credits from (i), (ii) and (iii) above.

4.3 Programme details: (e.g. modules or units studied), and the individual grades/marks/credits obtained:

CORE MODULES (C)

No.Course

IDCourse Title Semester ECTS

Course Credits

Grades

1 ΟΔΟ101 PHYSICS 1st 52 ΟΔΟ102 CHEMISTRY 1st 53 ΟΔΟ105 ANATOMY 1st 74 ΟΔ0203 BIOLOGY 2nd 55 ΟΔΟ204 PHYSIOLOGY 2nd 56 ΟΔΟ205 INFORMATICS 2nd 57 ΟΔΟ303 BIOCHEMISTRY 3rd 58 ΟΔ0305 BIOMETRY – BIOSTATISTICS 3rd 5

Total 42

Family name(s): …………………………………………………………………….Student identification code or number: ……………………………………………

Modules of ADMINISTRATI O N, ECO N O M ICS, LEG I SLAT I ON AND HUMANIT I ES (AELH)

No.Course

IDCourse Title Semester ECTS

Course Credits

Grades

1 ΟΔΟ405 PROFESSIONAL ETHICS 4th 32 ΟΔΟ506 PRINCIPLES OF BUSINESS

ADMINISTRATION & LABORATORY ORGANIZATION

5th 3

3a ΟΔΟ605 ENTREPRENEURSHIP 6th

3b ΟΔΟ606 PRINCIPLES OF HEALTH SERVICES ORGANIZATION & MANAGEMENT

6th 3

4a ΟΔΟ705 SOCIOLOGY OF HEALTH 7th

4b ΟΔΟ706 PRINCIPLES OF MARKETING 7th 3Total 12

SPECIA L MODULES (S)

No.Course

IDCourse Title Semester ECTS

Course Credits

Grades

1 ΟΔΟ103 PRINCIPLES OF DENTAL TECHNOLOGY 1ST 52 ΟΔΟ104 DENTAL MORPHOLOGY 1ST 83 ΟΔΟ202 DENTAL BIOMATERIALS I 2nd 54 ΟΔΟ302 DENTAL BIOMATERIALS II 3rd 55 ΟΔΟ304 PHYSIOLOGY OF STOMATOGNATHIC

SYSTEM – OCCLUSION3rd 5

6 ΟΔΟ402 PROSTHODONTICS & AESTHETICS 4th 57 ΟΔΟ404 ORAL MICROBIOLOGY 4th 58 ΟΔΟ504 ORAL & LAB HYGIENE 5th 39 ΟΔΟ505 FIRST AID 5th 3

10 ΟΔΟ604 METHODOLOGY – RESEARCH 6th 5Total 49

Family name(s): …………………………………………………………………….Student identification code or number: ……………………………………………

SPECIA LISA TION MODULES (SC)

No.Course

IDCourse Title Semester ECTS

Course Credits

Grades

1 ΟΔΟ201 REMOVABLE PROSTHODONTICS I 2nd 102 ΟΔΟ301 REMOVABLE PROSTHODONTICS II 3rd 103 ΟΔΟ401 FIXED PROSTHODONTICS I 4th 104 ΟΔΟ403 ORTHODONTICS I 4th 75 ΟΔΟ501 FIXED PROSTHODONTICS II 5th 96 ΟΔΟ502 RESTORATION OF OCCLUSION

DYSFUNCTIONS5th 5

7 ΟΔΟ503 ORTHODONTICS II 5th 78 ΟΔΟ601 DENTAL CERAMICS I 6th 109 ΟΔΟ602 MAXILLOFACIAL PROSTHODONTICS 6th 4

10 ΟΔΟ603 IMPLANT PROSTHODONTICS 6th 811 ΟΔΟ701 DENTAL CERAMICS II 7th 812 ΟΔΟ702 REMOVABLE PROSTHODONTICS III 7th 813 ΟΔΟ703 COMBINED PROSTHODONTICS –PRECISION

ATTACHMENTS7th 8

14 ΟΔΟ704 ENGLISH TERMINOLY FOR DENTAL TECHNOLOGY

7th 3

15 ΟΔΟ801 DISSERTATION(*) 8th 2016 ΟΔΟ802 PRACTICAL TRAINING(**) 8th 10 (--)

Total(According to student electives) 137

(*) Dissertation Title: «……………………………………………………………………………….»

(**) The Placement (6 months) took place in the enterprise / organisation

«……………………………………………………………………………………...»

4.4 Grading Scheme and if available, grade distribution guidance:

The grading scheme is based on the scale of ten as follows:8.50 – 10.00: «Excellent»6.50 – 8.49: «Very Good»5.00 – 6.49: «Good»4.00 – 4.99: «Insufficient»0.00 – 3.99: «Fail»

The minimum pass mark is 5.0 (five). For more information: www.teiath.gr

4.5 Overall classification of the qualification(in original language):

“ ”

Family name(s): …………………………………………………………………….Student identification code or number: ……………………………………………

5. INFORMATION ON THE FUNCTION OF THE QUALIFICATION

5.1 Access to further study:The degree of the Department gives access to postgraduate studies of MASTER’s degree level.

5.2 Professional status (if applicable):

The Department’s graduate academic and professional title is «Dental Technician- Technological Education graduate». The professional rights of the Dental Technician- Technological Education graduate are stated in the Presidential Decree No. 83 / Official Gazette: FEK 37/A/17-02-1989. Upon completion of the programme of study, the graduate of the Department of Dental Technology has acquired knowledge and practical experience necessary to successfully serve the following fields, either on his own resources or in collaboration with other scientists and technologists:

1. In private sector as dental technician2. In Public sector as dental technician3. They can also work in all levels of education according to the existing in force

legislation4. In any other professional activity that emerges from technology development

and which is evidently covered by the discipline of their specialization.

In these fields and in the corresponding sub-fields, the Department’s graduate is able to undertake responsibilities as follows:

i. They undertake the responsibility of the organization and operation of a dental laboratory assuring quality and ensuring appropriateness of the dental prostheses fabricated in it.

ii. They choose the right appliances and instruments for the equipment of dental laboratories, take care of their maintenance and implement the recommended hygiene and safety rules.

iii. They stay updated on modern materials; choose the right ones with the necessary biological behavior, as well as the laboratory method they will apply as each case may require.

iv. They man the dental laboratory with specialized staff, which they supervise and to which they assign specific works according to their specialty.

v. They design and fabricate all kinds of dental prostheses of Removable and Fixed Prosthodontics, in accordance with the dentist’s written instructions, aiming at the maintenance or restoration of the balance of the stomatognathic system.

vi. They design and fabricate orthodontic appliances of different types, intraoral and extraoral, always in accordance with the instructions.

vii. They possess the basic principles of implant and maxillofacial prosthetics so they can follow specialized courses.

viii. In the context of teamwork they participate in groups with specialized dentists for the design and fabrication of the above mentioned prostheses.

ix. They conduct studies and take part in research.x. They can also work in all levels of education according to the

existing in force legislation

Family name(s): …………………………………………………………………….Student identification code or number: ……………………………………………

6. FURTHER INFORMATION SOURCES: Website of the Ministry of Education: www.minedu.gov.gr Website of TEI of Athens: www.teiath.gr Website of the Department of Dental Technology: www.teiath.gr/seyp/dental_technology Website of the Public Relations and Information Office: career.teiath.gr

AddressTECHNOLOGICAL EDUCATIONAL INSTITUTE (T.E.I.) OF ATHENSSCHOOL OF HEALTH AND CARING PROFESSIONSDEPARTMENT OF DENTAL TECHNOLOGY

AGIOU SPYRIDONOS GR-122 44, EGALEO – ATHENS, GREECE

7. CERTIFICATION OF THE SUPPLEMENT

Date:

The Secretary of Department The Head of Department

Signature signature

THE PRESIDENT OF ΤΕΙ OF ATHENS

Family name(s): …………………………………………………………………….Student identification code or number: ……………………………………………

8. INFORMATION ON THE NATIONAL HIGHER EDUCATION SYSTEM (i) StructureAccording to the Framework Law (2007), higher education consists of two parallel sectors: the University sector (Universities, Polytechnics, Fine Arts Schools, the Open University) and the Technological sector (Technological Education Institutions (TEI) and the School of Pedagogic and Technological Education). The same law regulates issues concerning governance of higher education along the general lines of increased participation, greater transparency, accountability and increased autonomy. There are also State Non-university Tertiary Institutes offering vocationally oriented courses of shorter duration (2 to 3 years) which operate under the authority of other Ministries. (ii) Access Entrance to the various Schools of the Universities (Panepistimio) and Technological Education Institutions (Technologiko Ekpaideftiko Idryma – TEI) depends on the general score obtained by Lyceum graduates on the Certificate, as described above (Section 5.iv), on the number of available places (numerus clausus) and on the candidates' ranked preferences among schools and sections. (iii) Qualifications Students who successfully complete their studies in universities and TEI are awarded a Ptychio (first cycle degree). First cycle programmes last from four years for most fields to five years for engineering and certain other applied science fields and six years for medicine. The Ptychio leads to employment or further study at the post-graduate level that includes the one year second cycle leading to the second degree, Metaptychiako Diploma Eidikefsis – equivalent to the Master's degree – and the third cycle leading to the doctorate degree, Didaktoriko Diploma. Recent legislation on quality assurance in Higher Education, the Credit Transfer System and the Diploma Supplement defines the framework and criteria for evaluation of university departments and for certification of student degrees. These measures aim at promoting student mobility and contributing to the creation of a European Higher Education Area.

htt p ://w w w.eur y dice.org

htt p ://w w w.eur y dice.or g / Eur y base / fr a m es e t _ eur y base. h t m l

Family name(s): …………………………………………………………………….Student identification code or number: ……………………………………………