microfluidics: catalytic pumping systems
DESCRIPTION
Microfluidics: Catalytic Pumping Systems. Paul Longwell Hollidaysburg Area High School Summer 2005. Catalytic?. http://www.mrsec.psu.edu/News/nugget3.html. Penn State researchers have built several nano-devices that move when place in a hydrogen peroxide solution. - PowerPoint PPT PresentationTRANSCRIPT
![Page 1: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/1.jpg)
Microfluidics: Catalytic Pumping Systems
Paul Longwell
Hollidaysburg Area High School
Summer 2005
![Page 2: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/2.jpg)
Catalytic?
See movies of working nano-devices:
http://research.chem.psu.edu/axsgroup/nanomov.htm
http://www.mrsec.psu.edu/N
ews/nugget3.htm
l
Penn State researchers have built several nano-devices that move when place in a hydrogen peroxide solution.
The platinum serves as a catalyst, helping the hydrogen peroxide decompose and produce oxygen gas bubbles.
During this process, extra electrons are passed from the platinum to the gold and released into the solution.
![Page 3: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/3.jpg)
The Catalytic Pump Idea
Using silver in place of gold, Penn State’s Jeffrey Catchmark designed the device (pictured) to see if a pumping effect could be produced.
Based on flow patterns observed when testing previous devices, Dr. Catchmark believed the electrons would cause water molecules to be pulled alongside the conducting wire.
![Page 4: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/4.jpg)
The RET Project
As a participant of Penn State’s Research Experience for Teachers program, I worked under Dr. Catchmark to construct catalytic pumps using several different designs.
These designs varied in the size and shape of the silver and gold plates as well as the thickness of the conducting wire.
![Page 5: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/5.jpg)
The Fabrication ProcessBuilding the catalytic pump involved the following steps:
1. Mapping out the structure of the devices.
2. Creating masks (patterns) to use in creating each component of the devices.
3. Applying the first-layer pattern on a silicon wafer.
4. Depositing/Lift-off of gold using first-layer pattern.
5. Applying the second-layer pattern over the first pattern.
6. Depositing/Lift-off of silver using second-layer pattern.
7. Applying a dielectric coating over the entire device.
8. Using the third-layer pattern to open “windows” to the silver/gold.
![Page 6: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/6.jpg)
Creating the MasksThe Material
After Dr. Catchmark designed the devices, the next step was to construct a template for each layer of material needed for the pumping device.
The mask was made on a five-inch piece of soda-lime glass coated with chromium.
![Page 7: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/7.jpg)
Creating the MasksWriting the Pattern
Using a laser-writer, three separate masks were created. Each mask contained the pattern for one of the three layers of the pumping device.
Here, the quartz square is loaded into the laser writer.
The bottom of the writer.
![Page 8: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/8.jpg)
Creating the MasksDeveloping the Pattern
After being patterned by the laser writer, each mask must be developed using a Chromium Etch chemical. In this process, the chemical dissolves the chromium according to the pattern created by the laser.
![Page 9: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/9.jpg)
1st Layer - GoldPhotolithography
To begin building the pumping device, the pattern from the mask must be transferred onto a circular 3-inch silicon wafer.
![Page 10: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/10.jpg)
1st Layer - GoldPhotolithography
The LOR 1A is baked on before a second photoresist (SPR 3008) is applied and baked.
![Page 11: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/11.jpg)
1st Layer - GoldPhotolithography
Now coated with light-sensitive photoresist, the wafer is exposed to light through the first mask pattern.
![Page 12: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/12.jpg)
1st Layer - GoldPhotolithography
After one final bake, the exposed wafer is soaked in CD-26 developer and the photoresist is removed from the patterned areas.
![Page 13: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/13.jpg)
1st Layer - GoldGold Deposition
Using an electron-gun evaporator, the wafers are coated with 150 Angstroms of chrome and then 1000 Angstroms of gold.
![Page 14: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/14.jpg)
1st Layer - GoldGold Lift-Off
All gold outside of the patterned area is etched away with acetone and CD-26 developer.
![Page 15: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/15.jpg)
2nd Layer - SilverPhotolithography
As done previously with the first pattern, a layer of LOR1 and SPR-3008 photoresist are applied on top of the gold so that the silver features can be added.
![Page 16: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/16.jpg)
2nd Layer - SilverAlignment
For the device to function properly, it is extremely important that the new silver features matchup with the gold features as designed.
Improper alignment results in defects in a device.
![Page 17: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/17.jpg)
2nd Layer - SilverSilver Deposition
This time silver is evaporated and deposited on the wafers.
![Page 18: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/18.jpg)
2nd Layer - SilverSilver Lift-off
Using acetone and CD-26 again, the silver is removed from everywhere except the patterned locations.
![Page 19: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/19.jpg)
3rd Layer - DielectricFinal Layer
To electrically insulate all of the components except for one gold window and one silver window, a layer of Spin-On Glass was applied on top of the wafer.
![Page 20: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/20.jpg)
The Final ProductReady for Testing
![Page 21: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/21.jpg)
TestingIn Hydrogen Peroxide Solution
For testing, devices were taken to the chemistry lab of Ph.D. student Tim Kline.
![Page 22: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/22.jpg)
TestingIn Hydrogen Peroxide Solution
The devices were tested in a 5% solution of hydrogen peroxide. Polystyrene microspheres and gold nanorods were used to assess the performance of the device.
![Page 23: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/23.jpg)
ResultsThe polystyrene spheres indicated no discernible flow pattern in the fluid surrounding the device.
However…
![Page 24: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/24.jpg)
ResultsThe nanorods showed an attraction toward the silver metal even though the wire on this particular device was disconnected.
![Page 25: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/25.jpg)
ConclusionThe geometry of the pumping device seemed to be insignificant in affecting if/how the catalysis occurred.
In fact, the reaction seemed to occur regardless of whether or not a direct connection was present between the silver and gold. (Assuming the amount of gold contained in the lead connected to the silver was significant to sustain the reaction.)
Further research may reveal other factors (such as the substrate itself) that affect the nature of the reaction.
![Page 26: Microfluidics: Catalytic Pumping Systems](https://reader036.vdocuments.us/reader036/viewer/2022062321/56813883550346895da035ba/html5/thumbnails/26.jpg)
Thank YouThe staff at the Penn State Nanofabrication Facility were extremely helpful throughout this RET project.
Jeff Catchmark, Operations Manager
John McIntosh, Process Engineer
Joseph Lonjin, Process Technician
Guy Luvalee, Process Engineer
Andrzej Mieckowski, Process Engineer
Michael Rogosky, Process Engineer