microchip snpii
TRANSCRIPT
-
7/27/2019 MicroChip SNPII
1/4
Picosecond, high peak powerIR microchip lasers
All information contained herein is believed to be accurate and is subject to change without notice. Teem Photonics may not be heldliable for its use. Teem Photonics, its subsidiaries and affiliates, reserve the right to modify or withdraw, at any time and without anynotice, specifications, product design, product component. Some options may not be available for all products. Please contact Teem
Photonics for details. 16 January 2013SxP II lasers series - Page 1 of 4
www.teemphotonics.com
Features & benefits
Ultrashort pulsesAs low as 550ps durations
High peak powerExceeding 20kW per pulse
Variety of frequencyoptionsFree running to 130kHzFixed frequency to 4kHzTriggerable to 2kHz
Excellent beam qualityGaussian, TEM00, M1.3
Efficient, air cooledTypically dissipates
-
7/27/2019 MicroChip SNPII
2/4
Picosecond, high peak powerIR microchip lasers
All information contained herein is believed to be accurate and is subject to change without notice. Teem Photonics may not be heldliable for its use. Teem Photonics, its subsidiaries and affiliates, reserve the right to modify or withdraw, at any time and without anynotice, specifications, product design, product component. Some options may not be available for all products. Please contact Teem
Photonics for details. 16 January 2013SxP II lasers series - Page 2 of 4
www.teemphotonics.com
Technical specifications:
Laser model SNP-13E SNP-20F SNP-40F SNP-50F SNP-130F SFP-07E STP-07E
Wavelength (nm) 1064
Pulse Frequency
Repetition rate
(kHz)>4 >19 >35 >45 >130 0.01-4 (7) 0.01-2 (8)
Pulse Creation
Delay (PCD) (s) (1)- - - - - 4 >1.5 >7 >7
Average power
Average power(mW)
>52 >140 >140 >190 >200 N/A N/A
Short termstability (10min)(3)
-
7/27/2019 MicroChip SNPII
3/4
Picosecond, high peak powerIR microchip lasers
All information contained herein is believed to be accurate and is subject to change without notice. Teem Photonics may not be heldliable for its use. Teem Photonics, its subsidiaries and affiliates, reserve the right to modify or withdraw, at any time and without anynotice, specifications, product design, product component. Some options may not be available for all products. Please contact Teem
Photonics for details. 16 January 2013SxP II lasers series - Page 3 of 4
www.teemphotonics.com
Ordering information & notes:
To order the laser you require, pleaseuse the following ordering system:
S--
N: standard PQS free running mode.
T: external triggered mode. Specified over a continuousfrequency range, requires a MLC-03A-MP1 controller.F: fixed frequency mode. Specified at one fixed repetitionrate, requires a MLC-03A-03A-MP1 controller.
P: 1064nm
XX: Energy/Power/Rep rate value
E: energyP: powerF: rep rate
0: OEM1: CDRH, requires a MLC-03A-DR1 controllerF: multimode fibering 50/125m
other: Starting with a letter, OEM specific model
S: synchronisation output (photodiode output)
0: manual modeA: auto ON
E.g. a SNG-03E-1S00 is a free running, 532nm MicroChipwith 3J per pulse, CDRH compliant with synchronisationoutput.
MicroChip SNx lasers also require oneof the following controller:
Model TypeInputPower
CE CDRH
MLC-03A-DR1MLC-03A-DP1
Desktop100-240 V
ACYes* Yes*
MLC-03A-MR1MLC-03A-MP1
Module 12 V DC Yes No
MLC-03A-BR1MLC-03A-BP1
Board 12 V DC No No
*: if used with CDRH laser head.
Environment parameters
Operating temperature 0-50C
Maximum laser Head base platetemperature
-
7/27/2019 MicroChip SNPII
4/4
Picosecond, high peak powerIR microchip lasers
All information contained herein is believed to be accurate and is subject to change without notice. Teem Photonics may not be heldliable for its use. Teem Photonics, its subsidiaries and affiliates, reserve the right to modify or withdraw, at any time and without anynotice, specifications, product design, product component. Some options may not be available for all products. Please contact Teem
Photonics for details. 16 January 2013SxP II lasers series - Page 4 of 4
www.teemphotonics.com
Dimensions: SxP II (OEM) Weight : 300g